- 22 Mar, 2021 40 commits
-
-
Hans Verkuil authored
mtk_vcodec_drv.h: It's '@var:', not '@var - '. In two places 'struct' was used instead of 'enum'. vdec_drv_if.h: It's '@var:', not '@var :'. In one place 'struct' was used instead of 'enum'. venc_ipi_msg.h: It's '@data:', not '@data[8]:', i.e. arrays do not include the size in kernel-doc. It's '@var:', not 'var:'. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Cc: Alexandre Courbot <acourbot@chromium.org> Cc: Tiffany Lin <tiffany.lin@mediatek.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
-
Hans Verkuil authored
mtk_mdp_comp.h: MTK_MDP_COMP_TYPE_MAX was undocumented, but it is also unused, so just remove it. mtk_mdp_core.h: add missing '*' inside comment blocks, add a missing : after '@ctrls' and add a missing struct keyword. Signed-off-by:
-
Hans Verkuil authored
Add missing 'struct' keywords and fix typos in two struct member names. Signed-off-by:
-
Hans Verkuil authored
One comment used /** instead of /*, so it caused kernel-doc warnings. Just turn it into a regular comment. Signed-off-by:
-
Hans Verkuil authored
Two structs where missing the kernel-doc 'struct' keyword in their kernel-doc documentation. Signed-off-by:
-
Hans Verkuil authored
- @h264_dec was not documented, add that trivial change - it is not possible to document a global variable in kernel-doc, change to use 'DOC:' instead - fix mismatched struct name (hantro_vp8d_hw_ctx -> hantro_vp8_dec_hw_ctx) Signed-off-by:
Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by:
-
Hans Verkuil authored
The kernel-doc documentation for two structs was missing the 'struct' keyword. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
bdisp/bdisp-filter.h: coef: -> @coef: (missing @) c8sectpfe/c8sectpfe-debugfs.h: /** -> /* (wasn't a kernel-doc comment) sti/hva/hva.h: @v4l2: -> @vbuf: (wrong name) Signed-off-by:
-
Hans Verkuil authored
Fix formatting of two enums and one struct. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Hans Verkuil authored
Fix inline struct member documentation, was missing the '@memb:' prefix. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Signed-off-by:
-
Hans Verkuil authored
- added missing 'struct' kernel-doc keywords - add missing '*' in kernel-doc comment blocks Signed-off-by:
-
Hans Verkuil authored
Fix kernel-doc warnings due to missing 'struct' keyword. Signed-off-by:
-
Hans Verkuil authored
Fixes this kernel-doc warning: drivers/staging/media/tegra-video/csi.h:152: warning: Function parameter or member 'csi_chans' not described in 'tegra_csi' Signed-off-by:
-
Hans Verkuil authored
Fix the following kernel-doc warnings: drivers/media/usb/dvb-usb-v2/dvb_usb.h:109: warning: cannot understand function prototype: 'struct dvb_usb_driver_info ' drivers/media/usb/dvb-usb-v2/dvb_usb.h:126: warning: cannot understand function prototype: 'struct dvb_usb_rc ' drivers/media/usb/dvb-usb-v2/dvb_usb.h:143: warning: cannot understand function prototype: 'struct usb_data_stream_properties ' drivers/media/usb/dvb-usb-v2/dvb_usb.h:170: warning: expecting prototype for properties of dvb usb device adapter(). Prototype was for MAX_NO_OF_FE_PER_ADAP() instead drivers/media/usb/dvb-usb-v2/dvb_usb.h:221: error: Cannot parse struct or union! drivers/media/usb/dvb-usb-v2/dvb_usb.h:277: warning: expecting prototype for generic object of an usb stream(). Prototype was for MAX_NO_URBS_FOR_DATA_STREAM() instead drivers/media/usb/dvb-usb-v2/dvb_usb.h:319: warning: cannot understand function prototype: 'struct dvb_usb_adapter ' drivers/media/usb/dvb-usb-v2/dvb_usb.h:363: warning: cannot understand function prototype: 'struct dvb_usb_device ' drivers/media/usb/dvb-usb/dvb-usb.h:104: warning: cannot understand function prototype: 'struct usb_data_stream_properties ' drivers/media/usb/dvb-usb/dvb-usb.h:163: warning: expecting prototype for struct dvb_usb_adapter_properties. Prototype was for struct dvb_usb_adapter_fe_properties instead drivers/media/usb/dvb-usb/dvb-usb.h:205: warning: cannot understand function prototype: 'struct dvb_rc ' drivers/media/usb/dvb-usb/dvb-usb.h:227: warning: Enum value 'DVB_RC_LEGACY' not described in enum 'dvb_usb_mode' drivers/media/usb/dvb-usb/dvb-usb.h:227: warning: Enum value 'DVB_RC_CORE' not described in enum 'dvb_usb_mode' drivers/media/usb/dvb-usb/dvb-usb.h:271: error: Cannot parse struct or union! drivers/media/usb/dvb-usb/dvb-usb.h:325: error: Cannot parse struct or union! drivers/media/usb/dvb-usb/dvb-usb.h:385: warning: expecting prototype for struct dvb_usb_adapter. Prototype was for struct dvb_usb_fe_adapter instead drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'num_adapters_initialized' not described in 'dvb_usb_device' drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'adapter' not described in 'dvb_usb_device' drivers/media/usb/dvb-usb/dvb-usb.h:476: warning: Function parameter or member 'rc_phys' not described in 'dvb_usb_device' drivers/media/usb/em28xx/em28xx.h:377: warning: cannot understand function prototype: 'enum em28xx_amux ' Signed-off-by:
-
Robert Foss authored
This documentation has been incorporated in dtschema dt-bindings for the devices supported by CAMSS and is no longer helpful. Signed-off-by:
Robert Foss <robert.foss@linaro.org> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Robert Foss authored
Due to the complexity of describing multiple hardware generations in one document, switch to using separate dt-bindings. Signed-off-by:
-
Robert Foss authored
Add bindings for qcom,sdm845-camss in order to support the camera subsystem for SDM845. Signed-off-by:
-
Robert Foss authored
Add bindings for qcom,sdm660-camss in order to support the camera subsystem on SDM630/660 and SDA variants. Signed-off-by:
-
Robert Foss authored
Add bindings for qcom,msm8996-camss in order to support the camera subsystem on MSM8996. Signed-off-by:
-
Robert Foss authored
Add bindings for qcom,msm8916-camss in order to support the camera subsystem on MSM8916. Signed-off-by:
-
Robert Foss authored
Enable support for SDM845 based Titan 170 ISPs. Signed-off-by:
Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by:
-
Robert Foss authored
For Titan ISPs clocks fail to re-enable during vfe_get() after any vfe has been halted and its corresponding power domain power has been detached. Since all of the clocks depend on all of the PDs, per VFE PD detaching is no option for Gen2 HW. In order to not have regressions on for Gen1 HW, refactor the power domain management into hardware version specific code paths. Signed-off-by:
-
Robert Foss authored
Add register definitions for version 170 of the Titan architecture and implement support for the CSIPHY subdevice. Signed-off-by:
-
Robert Foss authored
Add register definitions for version 170 of the Titan architecture and implement support for the CSID subdevice. Signed-off-by:
-
Robert Foss authored
In order to support Qualcomm ISP hardware architectures that diverge from older architectures, the CSID subdevice drivers needs to be refactored to better abstract the different ISP hardware architectures. Signed-off-by:
-
Robert Foss authored
The CSI-2 spec defines format identifier for Data Type (DT), and how the Decode Format (DF) & Encode Format (EF) are implemented. The spec does however not define the DF, EF or Plain Format (PF) identifiers, as those are vendor specific. Plain formats describe the size of the pixels written by the RDI units to memory. PLAIN8 for example has the size 8 bits, and PLAIN32 32 bits. The appropriate Plain Format is determined by the Decode Format used. The smallest Plain Format that is able to contain a pixel of the used Decode Format is the appropriate one to use. As the vendor specific identifiers differ between hardware generations, split them out into separate headers. Signed-off-by:
-
Robert Foss authored
Add register definitions for version 170 of the Titan architecture and implement support for the RDI output mode. The RDI mode as opposed to the PIX output mode for the VFE unit does not support any ISP functionality. This means essentially only supporting dumping the output of the whatever the CSI decoder receives from the sensor. For example will a sensor outputting YUV pixel format frames, only allow the VFE to dump those frames as they are received by the ISP to memory through the RDI interface. Signed-off-by:
-
Robert Foss authored
In order to support Qualcomm ISP hardware architectures that diverge from older architectures, the VFE subdevice driver needs to be refactored to better abstract the different ISP architectures. Gen1 represents the CAMSS ISP architecture. The ISP architecture developed after CAMSS, Titan, will be referred to as Gen2. Signed-off-by:
-
Robert Foss authored
This driver supports multiple architecture versions of the Qualcomm ISP. The CAMSS architecure which this driver is name after, and with the introduction of this series, the Titan architecture. The ISPIF is an IP-block that is only present in the CAMSS generation of the architecture. In order to support the Titan generation, make the ISPIF an optional subdevice. Signed-off-by:
-
Robert Foss authored
Add enum representing the SDM845 SOC, which incorporates version 170 of the Titan architecture ISP. Signed-off-by:
-
Robert Foss authored
trace_printk() should not be used in production code, since extra memory is used for special buffers whenever trace_puts() is used. Replace it with dev_dbg() which provides all of the desired debugging functionality. Signed-off-by:
Nicolas Boichat <drinkcat@chromium.org> Reviewed-by:
-
Robert Foss authored
Comment refers to ISPIF, but this is incorrect. Only the VFE interrupts are handled by this function. Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
Robert Foss authored
Function name in comment is wrong, and was changed to be the same as the actual function name. The comment was changed to kerneldoc format. Signed-off-by:
-
Xiaofeng Cao authored
Change 'inaccesable' to 'inaccessible' Change 'detrmine' to 'determine' Delete 'in' grammatically Signed-off-by:
Xiaofeng Cao <caoxiaofeng@yulong.com> Signed-off-by:
-
Fabio Estevam authored
The imx3 camera driver has been removed a long time ago, so get rid of this unused header file. Signed-off-by:
Fabio Estevam <festevam@gmail.com> Signed-off-by:
-
Fabio Estevam authored
The imx27/imx25 camera driver has been removed a long time ago, so get rid of this unused header file. Signed-off-by:
-
Bhaskar Chowdhury authored
s/structues/structures/ s/decies/decides/ Signed-off-by:
Bhaskar Chowdhury <unixbhaskar@gmail.com> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Hans Verkuil authored
The _FRAME_SKIP_ enums were missing the _VIDEO prefix. Signed-off-by:
-
Hans Verkuil authored
The V4L2_CID_STATELESS_FWHT_PARAMS compound control was missing a proper initialization of the flags field, so after loading the vicodec module for the first time, running v4l2-compliance for the stateless decoder would fail on this control because the initial control value was considered invalid by the vicodec driver. Initializing the flags field to sane values fixes this. Signed-off-by:
-
Hans Verkuil authored
act_len can be uninitialized if usb_bulk_msg() returns an error. Set it to 0 to avoid a KMSAN error. Signed-off-by:
-
