- 22 Mar, 2022 17 commits
-
-
Alan Previn authored
- Upon the G2H Notify-Err-Capture event, parse through the GuC Log Buffer (error-capture-subregion) and generate one or more capture-nodes. A single node represents a single "engine- instance-capture-dump" and contains at least 3 register lists: global, engine-class and engine-instance. An internal link list is maintained to store one or more nodes. - Because the link-list node generation happen before the call to i915_gpu_codedump, duplicate global and engine-class register lists for each engine-instance register dump if we find dependent-engine resets in a engine-capture-group. - When i915_gpu_coredump calls into capture_engine, (in a subsequent patch) we detach the matching node (guc-id, LRCA, etc) from the link list above and attach it to i915_gpu_coredump's intel_engine_coredump structure when have matching LRCA/guc-id/engine-instance. Additional notes to be aware of: - GuC generates the error capture dump into the GuC log buffer but this buffer is one big log buffer with 3 independent subregions within it. Each subregion is populated with different content and used in different ways and timings but all regions operate behave as independent ring buffers. Each guc-log subregion (general-logs, crash-dump and error- capture) has it's own guc_log_buffer_state that contain independent read and write pointers. Signed-off-by:
Alan Previn <alan.previn.teres.alexis@intel.com> Reviewed-by:
Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com> Signed-off-by:
Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321164527.2500062-11-alan.previn.teres.alexis@intel.com
-
Alan Previn authored
Add intel_guc_capture_output_min_size_est function to provide a reasonable minimum size for error-capture region before allocating the shared buffer. Signed-off-by:
Matthew Brost <matthew.brost@intel.com> Signed-off-by:
-
Alan Previn authored
GuC log buffer regions for debug-log-events, crash-dumps and error-state-capture are all part of a single bo allocation that also includes the guc_log_buffer_state structures. Now that we support it, increase the size allocation for error-capture. Since the error-capture region is accessed at non-deterministic times (as part of GuC triggered context reset) while debug-log- events region is accessed as part of relay logging or during debugfs triggered dumps, move the mapping and unmapping of the shared buffer into intel_guc_log_create and intel_guc_log_destroy so that it's always mapped throughout life of GuC operation. Additionally, while here, update the guc log region layout diagram to follow the order according to the enum definition as per the GuC interface. NOTE: A future effort to visit (part of baseline code) is that buf_addr should be updated to be a io_sys_map and use the io_sys_map wrapper functions to access the various GuC log buffer regions. Signed-off-by:
-
Alan Previn authored
For the sake of better code readibility, change previous relay logging function names with "capture_logs" to "copy_debug_logs" to differentiate from error capture functions that will use a different region of the same buffer. Signed-off-by:
-
Alan Previn authored
Add GuC's error capture output structures and definitions as how they would appear in GuC log buffer's error capture subregion after an error state capture G2H event notification. Signed-off-by:
-
Alan Previn authored
Abstract out a Gen9 register list as the default for all other platforms we don't yet formally support GuC submission on. Signed-off-by:
-
Alan Previn authored
Add additional DG2 registers for GuC error state capture. Signed-off-by:
-
Alan Previn authored
Add the ability for runtime allocation and freeing of steered register list extentions that depend on the detected HW config fuses. Signed-off-by:
-
Alan Previn authored
Add device specific tables and register lists to cover different engines class types for GuC error state capture for XE_LP products. Signed-off-by:
-
Alan Previn authored
Update GuC ADS size allocation to include space for the lists of error state capture register descriptors. Then, populate GuC ADS with the lists of registers we want GuC to report back to host on engine reset events. This list should include global, engine-class and engine-instance registers for every engine-class type on the current hardware. Ensure we allocate a persistent store for the register lists that are populated into ADS so that we don't need to allocate memory during GT resets when GuC is reloaded and ADS population happens again. NOTE: Start with a sample static table of register lists to layout the framework before adding real registers in subsequent patch. This static register tables are a different format from the ADS populated list. Signed-off-by:
-
Michael Cheng authored
Replace all occurrence of cache_clflush_range with drm_clflush_virt_range. This will prevent compile errors on non-x86 platforms. Signed-off-by:
Michael Cheng <michael.cheng@intel.com> Reviewed-by:
Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Michael Cheng authored
Use drm_clflush_virt_range instead of clflushopt and remove the memory barrier, since drm_clflush_virt_range takes care of that. v2(Michael Cheng): Use sizeof(*addr) instead of sizeof(addr) to get the actual size of the page. Thanks to Matt Roper for pointing this out. Signed-off-by:
-
Michael Cheng authored
Use drm_clflush_virt_range instead of directly invoking clflush. This will prevent compiler errors when building for non-x86 architectures. v2(Michael Cheng): Remove extra clflush v3(Michael Cheng): Remove memory barrier since drm_clflush_virt_range takes care of it. v4(Michael Cheng): Get the size of value and not the size of the pointer when passing in execlists->csb_write. Thanks to Matt Roper for pointing this out. Signed-off-by:
-
Michael Cheng authored
Drop invalidate_csb_entries and directly call drm_clflush_virt_range. This allows for one less function call, and prevent complier errors when building for non-x86 architectures. v2(Michael Cheng): Drop invalidate_csb_entries function and directly invoke drm_clflush_virt_range. Thanks to Tvrtko for the sugguestion. v3(Michael Cheng): Use correct parameters for drm_clflush_virt_range. Thanks to Tvrtko for pointing this out. v4(Michael Cheng): Simplify &execlists->csb_status[0] to execlists->csb_status. Thanks to Matt Roper for the suggestion. Signed-off-by:
-
Michael Cheng authored
Re-work intel_write_status_page to use drm_clflush_virt_range. This will prevent compiler errors when building for non-x86 architectures. Signed-off-by:
-
Jani Nikula authored
The initialization is there only to silence the compiler, but use the correct initializer for i915_reg_t. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Reviewed-by:
-
Andi Shyti authored
Change functions that always return '0' to be void type. Signed-off-by:
Andi Shyti <andi.shyti@linux.intel.com> Reviewed-by:
Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by:
Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220321122759.227091-1-andi.shyti@linux.intel.com
-
- 21 Mar, 2022 8 commits
-
-
Vivek Kasireddy authored
On platforms capable of allowing 8K (7680 x 4320) modes, pinning 2 or more framebuffers/scanout buffers results in only one that is mappable/ fenceable. Therefore, pageflipping between these 2 FBs where only one is mappable/fenceable creates latencies large enough to miss alternate vblanks thereby producing less optimal framerate. This mainly happens because when i915_gem_object_pin_to_display_plane() is called to pin one of the FB objs, the associated vma is identified as misplaced -- because there is no space for it in the aperture -- and therefore i915_vma_unbind() is called which unbinds and evicts it. This misplaced vma gets subseqently pinned only when i915_gem_object_ggtt_pin_ww() is called without PIN_MAPPABLE. This whole thing results in a latency of ~10ms and happens every other repaint cycle. Therefore, to fix this issue, we just ensure that the misplaced VMA does not get evicted when we try to pin it with PIN_MAPPABLE -- by returning early if the mappable/fenceable flag is not set. Testcase: Running Weston and weston-simple-egl on an Alderlake_S (ADLS) platform with a 8K@60 mode results in only ~40 FPS (compared to ~59 FPS with this patch). Since upstream Weston submits a frame ~7ms before the next vblank, the latencies seen between atomic commit and flip event are 7, 24 (7 + 16.66), 7, 24..... suggesting that it misses the vblank every other frame. Here is the ftrace snippet that shows the source of the ~10ms latency: i915_gem_object_pin_to_display_plane() { 0.102 us | i915_gem_object_set_cache_level(); i915_gem_object_ggtt_pin_ww() { 0.390 us | i915_vma_instance(); 0.178 us | i915_vma_misplaced(); i915_vma_unbind() { __i915_active_wait() { 0.082 us | i915_active_acquire_if_busy(); 0.475 us | } intel_runtime_pm_get() { 0.087 us | intel_runtime_pm_acquire(); 0.259 us | } __i915_active_wait() { 0.085 us | i915_active_acquire_if_busy(); 0.240 us | } __i915_vma_evict() { ggtt_unbind_vma() { gen8_ggtt_clear_range() { 10507.255 us | } 10507.689 us | } 10508.516 us | } v2: - Expand the code comments to describe the ping-pong issue. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by:Tvrtko Ursulin <tvrtko.ursulin@intel.com> Signed-off-by:
Vivek Kasireddy <vivek.kasireddy@intel.com> Signed-off-by:
-
Sujaritha Sundaresan authored
Throttling here refers to the GT frequency being clipped. Each of the throttle reason attributes will have a 0 or 1 value depending upon whether there is throttling and also the specific reason for it. The following is a brief description of the sysfs throttle frequency attributes added: - throttle_reason_status: when set indicates that there is GT frequency clipping. - throttle_reason_pl1: when set indicates that PBM PL1 (platform or package PL1) has caused GT frequency clipping. - throttle_reason_pl2: when set indicates that PBM PL2 or PL3 (platform or package PL2 or PL3) has caused GT frequency clipping. - throttle_reason_pl4: when set indicates that PL4 or IccMax has caused GT frequency clipping. - throttle_reason_thermal: when set indicates that Thermal event has caused GT frequency clipping. - throttle_reason_prochot: when set indicates that PROCHOT# has caused GT frequency clipping. - throttle_reason_ratl: when set indicates that Running Average Thermal Limit has caused GT frequency clipping. - throttle_reason_vr_thermalert: when set indicates that Hot VR (any processor VR) has caused GT frequency clipping. - throttle_reason_vr_tdc: when set indicates that VR TDC (Thermal Design Current) has caused GT frequency clipping. Signed-off-by:
Sujaritha Sundaresan <sujaritha.sundaresan@intel.com> Signed-off-by:
Andrzej Hajda <andrzej.hajda@intel.com> Signed-off-by:
-
Andi Shyti authored
Now tiles have their own sysfs interfaces under the gt/ directory. Because RPS is a property that can be configured on a tile basis, then each tile should have its own interface The new sysfs structure will have a similar layout for the 4 tile case: /sys/.../card0 ├── gt │ ├── gt0 │ │ ├── id │ │ ├── rc6_enable │ │ ├── rc6_residency_ms │ │ ├── rps_act_freq_mhz │ │ ├── rps_boost_freq_mhz │ │ ├── rps_cur_freq_mhz │ │ ├── rps_max_freq_mhz │ │ ├── rps_min_freq_mhz │ │ ├── rps_RP0_freq_mhz │ │ ├── rps_RP1_freq_mhz │ │ └── rps_RPn_freq_mhz . . . . . . │ └── gtN │ ├── id │ ├── rc6_enable │ ├── rc6_residency_ms │ ├── rps_act_freq_mhz │ ├── rps_boost_freq_mhz │ ├── rps_cur_freq_mhz │ ├── rps_max_freq_mhz │ ├── rps_min_freq_mhz │ ├── rps_RP0_freq_mhz │ ├── rps_RP1_freq_mhz │ └── rps_RPn_freq_mhz ├── gt_act_freq_mhz -+ ├── gt_boost_freq_mhz | ├── gt_cur_freq_mhz | Original interface ├── gt_max_freq_mhz +─-> kept as existing ABI; ├── gt_min_freq_mhz | it points to gt0/ ├── gt_RP0_freq_mhz | ├── gt_RP1_freq_mhz | └── gt_RPn_freq_mhz -+ The existing interfaces have been kept in their original location to preserve the existing ABI. They act on all the GTs: when writing they loop through all the GTs and write the information on each interface. When reading they provide the average value from all the GTs. This patch is not really adding exposing new interfaces (new ABI) other than adapting the existing one to more tiles. In any case this new set of interfaces will be a basic tool for system managers and administrators when using i915. Signed-off-by: -
Andi Shyti authored
Now tiles have their own sysfs interfaces under the gt/ directory. Because RC6 is a property that can be configured on a tile basis, then each tile should have its own interface The new sysfs structure will have a similar layout for the 4 tile case: /sys/.../card0 ├── gt │ ├── gt0 │ │ ├── id │ │ ├── rc6_enable │ │ ├── rc6_residency_ms . . . . . . . . │ └── gtN │ ├── id │ ├── rc6_enable │ ├── rc6_residency_ms │ . │ . │ └── power/ -+ ├── rc6_enable | Original interface ├── rc6_residency_ms +-> kept as existing ABI; . | it multiplexes over . | the GTs -+ The existing interfaces have been kept in their original location to preserve the existing ABI. They act on all the GTs: when reading they provide the average value from all the GTs. This patch is not really adding exposing new interfaces (new ABI) other than adapting the existing one to more tiles. In any case this new set of interfaces will be a basic tool for system managers and administrators when using i915. Signed-off-by: -
Andi Shyti authored
Now that we have tiles we want each of them to have its own interface. A directory "gt/" is created under "cardN/" that will contain as many diroctories as the tiles. In the coming patches tile related interfaces will be added. For now the sysfs gt structure simply has an id interface related to the current tile count. The directory structure will follow this scheme: /sys/.../card0 └── gt ├── gt0 │ └── id : : └─- gtN └── id This new set of interfaces will be a basic tool for system managers and administrators when using i915. Signed-off-by: -
Tvrtko Ursulin authored
On a multi-tile platform, each tile has its own registers + GGTT space, and BAR 0 is extended to cover all of them. Up to four GTs are supported in i915->gt[], with slot zero shadowing the existing i915->gt0 to enable source compatibility with legacy driver paths. A for_each_gt macro is added to iterate over the GTs and will be used by upcoming patches that convert various parts of the driver to be multi-gt aware. Only the primary/root tile is initialized for now; the other tiles will be detected and plugged in by future patches once the necessary infrastructure is in place to handle them. Signed-off-by:
Abdiel Janulgue <abdiel.janulgue@gmail.com> Signed-off-by:
Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
Andi Shyti authored
The "gt_is_root(struct intel_gt *gt)" helper return true if the gt is the root gt, which means that its id is 0. Return false otherwise. Suggested-by:
Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
Andi Shyti authored
With the upcoming multitile support each tile will have its own local memory. Mark the current LMEM with the suffix '0' to emphasise that it belongs to the root tile. Suggested-by:
-
- 18 Mar, 2022 5 commits
-
-
Matthew Brost authored
Add logical mapping for VDBOXs. This mapping is required for split-frame workloads, which otherwise fail with 00000000-F8C53528: [GUC] 0441-INVALID_ENGINE_SUBMIT_MASK ... if the application is using the logical id to reorder the engines and then using it for the batch buffer submission. It's not a big problem on media version 11 and 12 as they have only 2 instances of VCS and the logical to physical mapping is monotonically increasing - if the application is not using the logical id. Changing it for the previous platforms allows the media driver implementation for the next ones (12.50 and above) to be the same, checking the logical id. It should also not introduce any bug for the old versions of userspace not checking the id. The mapping added here is the complete map needed by XEHPSDV. Previous platforms with only 2 instances will just use a partial map and should still work. v2: Remove static from map variable (José) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220316234538.434357-2-lucas.demarchi@intel.com
-
Lucas De Marchi authored
Earlier versions of commit a5b7ef27 ("drm/i915: Add struct to hold IP version") named "ver" as "arch" and then when it was renamed it missed the rename on MEDIA_VER_FULL() since it it's currently not used. Fixes: a5b7ef27 ("drm/i915: Add struct to hold IP version") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Akeem G Abodunrin authored
Starting with DG2, preemption can no longer be controlled using userspace on a per-context basis. Instead, the hardware only allows us to enable or disable preemption in a global, system-wide basis. Also, we lose the ability to specify the preemption granularity (such as batch-level vs command-level vs object-level). v2 (MattR): - Move debugfs interface to a separate patch. (Jani) v3 (MattR): - Drop the debugfs support completely for now. Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: John Harrison <john.c.harrison@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Signed-off-by:
Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220318021051.2073847-1-matthew.d.roper@intel.com
-
Rodrigo Vivi authored
In this interface i915 is returning a blob of data which it receives from the guc software. This blob provides some useful data about the hardware for drivers. The format of this blob will be documented in the Programmer Reference Manuals when released. Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Kenneth Graunke <kenneth.w.graunke@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Slawomir Milczarek <slawomir.milczarek@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by:
John Harrison <John.C.Harrison@Intel.com> Reviewed-by:
Jordan Justen <jordan.l.justen@intel.com> Tested-by:
Jon Bloomfield <jon.bloomfield@intel.com> Signed-off-by:
-
John Harrison authored
Implement support for fetching the hardware description table from the GuC. The call is made twice - once without a destination buffer to query the size and then a second time to fill in the buffer. The table is stored in the GT structure so that it can be fetched once at driver load time. Keeping inside a GuC structure would mean it would be release and reloaded on a GuC reset (part of a full GT reset). However, the table does not change just because the GT has been reset and the GuC reloaded. Also, dynamic memory allocations inside the reset path are a problem. Note that the table is only available on ADL-P and later platforms. v2 (John's v2 patch): * Move to GT level to avoid memory allocation during reset path (and unnecessary re-read of the table on a reset). v5 (of Jordan's posting): * Various changes made by Jordan and recommended by Michal - Makefile ordering - Adjust "struct intel_guc_hwconfig hwconfig" comment - Set Copyright year to 2022 in intel_guc_hwconfig.c/.h - Drop inline from hwconfig_to_guc() - Replace hwconfig param with guc in __guc_action_get_hwconfig() - Move zero size check into guc_hwconfig_discover_size() - Change comment to say zero size offset/size is needed to get size - Add has_guc_hwconfig to devinfo and drop has_table() - Change drm_err to notice in __uc_init_hw() and use %pe v6 (of Jordan's posting): * Added a couple more small changes recommended by Michal * Merge in John's v2 patch, but note: - Using drm_notice as recommended by Michal - Reverted Michal's suggestion of using devinfo v7 (of Jordan's posting): * Change back to drm_err as preferred by John Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Signed-off-by:
-
- 16 Mar, 2022 10 commits
-
-
Matthew Auld authored
On integrated it looks like the GGTT base should always 1:1 maps to somewhere within DSM. On discrete the base seems to be pre-programmed with a normal lmem address, and is not 1:1 mapped with the base address. On such devices probe the lmem address directly from the PTE. v2(Ville): - The base is actually the pre-programmed GGTT address, which is then meant to 1:1 map to somewhere inside dsm. In the case of dgpu the base looks to just be some offset within lmem, but this also happens to be the exact dsm start, on dg1. Therefore we should only need to fudge the physical address, before allocating from stolen. - Bail if it's not located in dsm. v3: - Scratch that. There doesn't seem to be any relationship with the base and PTE address, on at least DG1. Let's instead just grab the lmem address from the PTE itself. Signed-off-by:Nirmoy Das <nirmoy.das@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20220315181425.576828-7-matthew.auld@intel.com
-
CQ Tang authored
When system does not have mappable aperture, ggtt->mappable_end=0. In this case if we pass PIN_MAPPABLE when pinning vma, the pinning code will return -ENOSPC. So conditionally set PIN_MAPPABLE if HAS_GMCH(). Suggested-by:
Chris P Wilson <chris.p.wilson@intel.com> Signed-off-by:
CQ Tang <cq.tang@intel.com> Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Cc: Ap Kamal <kamal.ap@intel.com> Reviewed-by:
-
Matthew Auld authored
For the ttm backend we can use existing placements fpfn and lpfn to force the allocator to place the object at the requested offset, potentially evicting stuff if the spot is currently occupied. Signed-off-by:
-
Matthew Auld authored
Add a generic interface for allocating an object at some specific offset, and convert stolen over. Later we will want to hook this up to different backends. Signed-off-by:
-
Matthew Auld authored
Keep the behaviour consistent with normal lmem, where we assume CPU access if by default required. Signed-off-by:
-
Akeem G Abodunrin authored
On client platforms with reduced LMEM BAR, we should be able to continue with driver load with reduced io_size. Instead of using the BAR size to determine the how large stolen should be, we should instead use the ADDR_RANGE register to figure this out(at least on platforms like DG2). For simplicity we don't attempt to support partially mappable stolen. v2: rearrange the io_mapping_init_wc slightly, since the stolen setup might result in reduced io_size. Signed-off-by:
-
Matthew Auld authored
Just pass along the probed io_size. The backend should be able to utilize the entire range here, even if some of it is non-mappable. It does leave open with what to do with stolen local-memory. Signed-off-by:
Thomas Hellström <thomas.hellstrom@linux.intel.com> Reviewed-by:
-
Matt Roper authored
Upcoming patches will need to steer writes to multicast registers as well as reading them. Although the setting of the 'multicast' bit should only really matter for write operations (reads always operate in a unicast manner and give us the result from one specific instance), Wa_22013088509 suggests that we leave the multicast bit enabled when performing read operations, so we follow suit here. Cc: Harish Chegondi <harish.chegondi@intel.com> Signed-off-by:
-
Daniele Ceraolo Spurio authored
GuC has its own steering mechanism and can't use the default set by i915, so we need to provide the steering information that the FW will need to save/restore registers while processing an engine reset. The GUC interface allows us to do so as part of the register save/restore list and it requires us to specify the steering for all multicast register, even those that would be covered by the default setting for cpu access. Given that we do not distinguish between registers that do not need steering and registers that are guaranteed to work the default steering, we set the steering for all entries in the guc list that do not require a special steering (e.g. mslice) to the default settings; this will cost us a few extra writes during engine reset but allows us to keep the steering logic simple. Cc: John Harrison <John.C.Harrison@Intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by:
-
Matt Roper authored
Add a new 'steering' node in each gt's debugfs directory that tells whether we're using explicit steering for various types of MCR ranges and, if so, what MMIO ranges it applies to. We're going to be transitioning away from implicit steering, even for slice/dss steering soon, so the information reported here will become increasingly valuable once that happens. v2: - Adding missing 'static' on intel_steering_types[] (Jose, sparse) v3: - "static const char *" -> "static const char * const" (sparse) Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by:
-
