- 29 Mar, 2019 17 commits
-
-
Qian Cai authored
Due to has_unmovable_pages() taking an incorrect irqsave flag instead of the isolation flag in set_migratetype_isolate(), there are issues with HWPOSION and error reporting where dump_page() is not called when there is an unmovable page. Link: http://lkml.kernel.org/r/20190320204941.53731-1-cai@lca.pw Fixes: d381c547 ("mm: only report isolation failures when offlining memory") Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Signed-off-by: Qian Cai <cai@lca.pw> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
When start_isolate_page_range() returned -EBUSY in __offline_pages(), it calls memory_notify(MEM_CANCEL_OFFLINE, &arg) with an uninitialized "arg". As the result, it triggers warnings below. Also, it is only necessary to notify MEM_CANCEL_OFFLINE after MEM_GOING_OFFLINE. page:ffffea0001200000 count:1 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x3fffe000001000(reserved) raw: 003fffe000001000 ffffea0001200008 ffffea0001200008 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: unmovable page WARNING: CPU: 25 PID: 1665 at mm/kasan/common.c:665 kasan_mem_notifier+0x34/0x23b CPU: 25 PID: 1665 Comm: bash Tainted: G W 5.0.0+ #94 Hardware name: HP ProLiant DL180 Gen9/ProLiant DL180 Gen9, BIOS U20 10/25/2017 RIP: 0010:kasan_mem_notifier+0x34/0x23b RSP: 0018:ffff8883ec737890 EFLAGS: 00010206 RAX: 0000000000000246 RBX: ff10f0f4435f1000 RCX: f887a7a21af88000 RDX: dffffc0000000000 RSI: 0000000000000020 RDI: ffff8881f221af88 RBP: ffff8883ec737898 R08: ffff888000000000 R09: ffffffffb0bddcd0 R10: ffffed103e857088 R11: ffff8881f42b8443 R12: dffffc0000000000 R13: 00000000fffffff9 R14: dffffc0000000000 R15: 0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000560fbd31d730 CR3: 00000004049c6003 CR4: 00000000001606a0 Call Trace: notifier_call_chain+0xbf/0x130 __blocking_notifier_call_chain+0x76/0xc0 blocking_notifier_call_chain+0x16/0x20 memory_notify+0x1b/0x20 __offline_pages+0x3e2/0x1210 offline_pages+0x11/0x20 memory_block_action+0x144/0x300 memory_subsys_offline+0xe5/0x170 device_offline+0x13f/0x1e0 state_store+0xeb/0x110 dev_attr_store+0x3f/0x70 sysfs_kf_write+0x104/0x150 kernfs_fop_write+0x25c/0x410 __vfs_write+0x66/0x120 vfs_write+0x15a/0x4f0 ksys_write+0xd2/0x1b0 __x64_sys_write+0x73/0xb0 do_syscall_64+0xeb/0xb78 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7f14f75cc3b8 RSP: 002b:00007ffe84d01d68 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000008 RCX: 00007f14f75cc3b8 RDX: 0000000000000008 RSI: 0000563f8e433d70 RDI: 0000000000000001 RBP: 0000563f8e433d70 R08: 000000000000000a R09: 00007ffe84d018f0 R10: 000000000000000a R11: 0000000000000246 R12: 00007f14f789e780 R13: 0000000000000008 R14: 00007f14f7899740 R15: 0000000000000008 Link: http://lkml.kernel.org/r/20190320204255.53571-1-cai@lca.pw Fixes: 79605093 ("mm, memory_hotplug: print reason for the offlining failure") Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: <stable@vger.kernel.org> [5.0.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Andrei Vagin authored
There are a few system calls (pselect, ppoll, etc) which replace a task sigmask while they are running in a kernel-space When a task calls one of these syscalls, the kernel saves a current sigmask in task->saved_sigmask and sets a syscall sigmask. On syscall-exit-stop, ptrace traps a task before restoring the saved_sigmask, so PTRACE_GETSIGMASK returns the syscall sigmask and PTRACE_SETSIGMASK does nothing, because its sigmask is replaced by saved_sigmask, when the task returns to user-space. This patch fixes this problem. PTRACE_GETSIGMASK returns saved_sigmask if it's set. PTRACE_SETSIGMASK drops the TIF_RESTORE_SIGMASK flag. Link: http://lkml.kernel.org/r/20181120060616.6043-1-avagin@gmail.com Fixes: 29000cae ("ptrace: add ability to get/set signal-blocked mask") Signed-off-by: Andrei Vagin <avagin@gmail.com> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
YueHaibing authored
Fix sparse warning: fs/proc/kcore.c:591:19: warning: symbol 'kcore_modules' was not declared. Should it be static? Link: http://lkml.kernel.org/r/20190320135417.13272-1-yuehaibing@huawei.comSigned-off-by: YueHaibing <yuehaibing@huawei.com> Acked-by: Mukesh Ojha <mojha@codeaurora.org> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: Omar Sandoval <osandov@fb.com> Cc: James Morse <james.morse@arm.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Randy Dunlap authored
Fix typo of kernel-doc parameter notation (there should be no space between '@' and the parameter name). Also fixes bogus kernel-doc notation output formatting. Link: http://lkml.kernel.org/r/ddce8b80-9a8a-d52d-3546-87b2211c089a@infradead.org Fixes: 70b44595 ("mm, compaction: use free lists to quickly locate a migration source") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: William Kucharski <william.kucharski@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Oscar Salvador authored
While debugging something, I added a dump_page() into do_swap_page(), and I got the splat from below. The issue happens when dereferencing mapping->host in __dump_page(): ... else if (mapping) { pr_warn("%ps ", mapping->a_ops); if (mapping->host->i_dentry.first) { struct dentry *dentry; dentry = container_of(mapping->host->i_dentry.first, struct dentry, d_u.d_alias); pr_warn("name:\"%pd\" ", dentry); } } ... Swap address space does not contain an inode information, and so mapping->host equals NULL. Although the dump_page() call was added artificially into do_swap_page(), I am not sure if we can hit this from any other path, so it looks worth fixing it. We can easily do that by checking mapping->host first. Link: http://lkml.kernel.org/r/20190318072931.29094-1-osalvador@suse.de Fixes: 1c6fb1d8 ("mm: print more information about mapping in __dump_page") Signed-off-by: Oscar Salvador <osalvador@suse.de> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Hugh Dickins <hughd@google.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Yang Shi authored
When MPOL_MF_STRICT was specified and an existing page was already on a node that does not follow the policy, mbind() should return -EIO. But commit 6f4576e3 ("mempolicy: apply page table walker on queue_pages_range()") broke the rule. And commit c8633798 ("mm: mempolicy: mbind and migrate_pages support thp migration") didn't return the correct value for THP mbind() too. If MPOL_MF_STRICT is set, ignore vma_migratable() to make sure it reaches queue_pages_to_pte_range() or queue_pages_pmd() to check if an existing page was already on a node that does not follow the policy. And, non-migratable vma may be used, return -EIO too if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified. Tested with https://github.com/metan-ucw/ltp/blob/master/testcases/kernel/syscalls/mbind/mbind02.c [akpm@linux-foundation.org: tweak code comment] Link: http://lkml.kernel.org/r/1553020556-38583-1-git-send-email-yang.shi@linux.alibaba.com Fixes: 6f4576e3 ("mempolicy: apply page table walker on queue_pages_range()") Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Signed-off-by: Oscar Salvador <osalvador@suse.de> Reported-by: Cyril Hrubis <chrubis@suse.cz> Suggested-by: Kirill A. Shutemov <kirill@shutemov.name> Acked-by: Rafael Aquini <aquini@redhat.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Acked-by: David Rientjes <rientjes@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Souptick Joarder authored
kbuild produces the below warning: tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master head: 5453a3df commit 3d353901 ("mm: create the new vm_fault_t type") reproduce: # apt-get install sparse git checkout 3d353901 make ARCH=x86_64 allmodconfig make C=1 CF='-fdiagnostic-prefix -D__CHECK_ENDIAN__' >> mm/memory.c:3968:21: sparse: incorrect type in assignment (different >> base types) @@ expected restricted vm_fault_t [usertype] ret @@ >> got e] ret @@ mm/memory.c:3968:21: expected restricted vm_fault_t [usertype] ret mm/memory.c:3968:21: got int This patch converts to return vm_fault_t type for hugetlb_fault() when CONFIG_HUGETLB_PAGE=n. Regarding the sparse warning, Luc said: : This is the expected behaviour. The constant 0 is magic regarding bitwise : types but ({ ...; 0; }) is not, it is just an ordinary expression of type : 'int'. : : So, IMHO, Souptick's patch is the right thing to do. Link: http://lkml.kernel.org/r/20190318162604.GA31553@jordon-HP-15-Notebook-PCSigned-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Boichat authored
IOMMUs using ARMv7 short-descriptor format require page tables (level 1 and 2) to be allocated within the first 4GB of RAM, even on 64-bit systems. For level 1/2 pages, ensure GFP_DMA32 is used if CONFIG_ZONE_DMA32 is defined (e.g. on arm64 platforms). For level 2 pages, allocate a slab cache in SLAB_CACHE_DMA32. Note that we do not explicitly pass GFP_DMA[32] to kmem_cache_zalloc, as this is not strictly necessary, and would cause a warning in mm/sl*b.c, as we did not update GFP_SLAB_BUG_MASK. Also, print an error when the physical address does not fit in 32-bit, to make debugging easier in the future. Link: http://lkml.kernel.org/r/20181210011504.122604-3-drinkcat@chromium.org Fixes: ad67f5a6 ("arm64: replace ZONE_DMA with ZONE_DMA32") Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Christoph Lameter <cl@linux.com> Cc: David Rientjes <rientjes@google.com> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: Huaisheng Ye <yehs1@lenovo.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Michal Hocko <mhocko@suse.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sasha Levin <Alexander.Levin@microsoft.com> Cc: Tomasz Figa <tfiga@google.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Yong Wu <yong.wu@mediatek.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nicolas Boichat authored
Patch series "iommu/io-pgtable-arm-v7s: Use DMA32 zone for page tables", v6. This is a followup to the discussion in [1], [2]. IOMMUs using ARMv7 short-descriptor format require page tables (level 1 and 2) to be allocated within the first 4GB of RAM, even on 64-bit systems. For L1 tables that are bigger than a page, we can just use __get_free_pages with GFP_DMA32 (on arm64 systems only, arm would still use GFP_DMA). For L2 tables that only take 1KB, it would be a waste to allocate a full page, so we considered 3 approaches: 1. This series, adding support for GFP_DMA32 slab caches. 2. genalloc, which requires pre-allocating the maximum number of L2 page tables (4096, so 4MB of memory). 3. page_frag, which is not very memory-efficient as it is unable to reuse freed fragments until the whole page is freed. [3] This series is the most memory-efficient approach. stable@ note: We confirmed that this is a regression, and IOMMU errors happen on 4.19 and linux-next/master on MT8173 (elm, Acer Chromebook R13). The issue most likely starts from commit ad67f5a6 ("arm64: replace ZONE_DMA with ZONE_DMA32"), i.e. 4.15, and presumably breaks a number of Mediatek platforms (and maybe others?). [1] https://lists.linuxfoundation.org/pipermail/iommu/2018-November/030876.html [2] https://lists.linuxfoundation.org/pipermail/iommu/2018-December/031696.html [3] https://patchwork.codeaurora.org/patch/671639/ This patch (of 3): IOMMUs using ARMv7 short-descriptor format require page tables to be allocated within the first 4GB of RAM, even on 64-bit systems. On arm64, this is done by passing GFP_DMA32 flag to memory allocation functions. For IOMMU L2 tables that only take 1KB, it would be a waste to allocate a full page using get_free_pages, so we considered 3 approaches: 1. This patch, adding support for GFP_DMA32 slab caches. 2. genalloc, which requires pre-allocating the maximum number of L2 page tables (4096, so 4MB of memory). 3. page_frag, which is not very memory-efficient as it is unable to reuse freed fragments until the whole page is freed. This change makes it possible to create a custom cache in DMA32 zone using kmem_cache_create, then allocate memory using kmem_cache_alloc. We do not create a DMA32 kmalloc cache array, as there are currently no users of kmalloc(..., GFP_DMA32). These calls will continue to trigger a warning, as we keep GFP_DMA32 in GFP_SLAB_BUG_MASK. This implies that calls to kmem_cache_*alloc on a SLAB_CACHE_DMA32 kmem_cache must _not_ use GFP_DMA32 (it is anyway redundant and unnecessary). Link: http://lkml.kernel.org/r/20181210011504.122604-2-drinkcat@chromium.orgSigned-off-by: Nicolas Boichat <drinkcat@chromium.org> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Will Deacon <will.deacon@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: Sasha Levin <Alexander.Levin@microsoft.com> Cc: Huaisheng Ye <yehs1@lenovo.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Cc: Yong Wu <yong.wu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Tomasz Figa <tfiga@google.com> Cc: Yingjoe Chen <yingjoe.chen@mediatek.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Matthew Wilcox <willy@infradead.org> Cc: Hsin-Yi Wang <hsinyi@chromium.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Darrick J. Wong authored
ocfs2_reflink_inodes_lock() can swap the inode1/inode2 variables so that we always grab cluster locks in order of increasing inode number. Unfortunately, we forget to swap the inode record buffer head pointers when we've done this, which leads to incorrect bookkeepping when we're trying to make the two inodes have the same refcount tree. This has the effect of causing filesystem shutdowns if you're trying to reflink data from inode 100 into inode 97, where inode 100 already has a refcount tree attached and inode 97 doesn't. The reflink code decides to copy the refcount tree pointer from 100 to 97, but uses inode 97's inode record to open the tree root (which it doesn't have) and blows up. This issue causes filesystem shutdowns and metadata corruption! Link: http://lkml.kernel.org/r/20190312214910.GK20533@magnolia Fixes: 29ac8e85 ("ocfs2: implement the VFS clone_range, copy_range, and dedupe_range features") Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by: Joseph Qi <jiangqi903@gmail.com> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Joseph Qi <joseph.qi@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
Commit f1dd2cd1 ("mm, memory_hotplug: do not associate hotadded memory to zones until online") introduced move_pfn_range_to_zone() which calls memmap_init_zone() during onlining a memory block. memmap_init_zone() will reset pagetype flags and makes migrate type to be MOVABLE. However, in __offline_pages(), it also call undo_isolate_page_range() after offline_isolated_pages() to do the same thing. Due to commit 2ce13640 ("mm: __first_valid_page skip over offline pages") changed __first_valid_page() to skip offline pages, undo_isolate_page_range() here just waste CPU cycles looping around the offlining PFN range while doing nothing, because __first_valid_page() will return NULL as offline_isolated_pages() has already marked all memory sections within the pfn range as offline via offline_mem_sections(). Also, after calling the "useless" undo_isolate_page_range() here, it reaches the point of no returning by notifying MEM_OFFLINE. Those pages will be marked as MIGRATE_MOVABLE again once onlining. The only thing left to do is to decrease the number of isolated pageblocks zone counter which would make some paths of the page allocation slower that the above commit introduced. Even if alloc_contig_range() can be used to isolate 16GB-hugetlb pages on ppc64, an "int" should still be enough to represent the number of pageblocks there. Fix an incorrect comment along the way. [cai@lca.pw: v4] Link: http://lkml.kernel.org/r/20190314150641.59358-1-cai@lca.pw Link: http://lkml.kernel.org/r/20190313143133.46200-1-cai@lca.pw Fixes: 2ce13640 ("mm: __first_valid_page skip over offline pages") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Michal Hocko <mhocko@suse.com> Reviewed-by: Oscar Salvador <osalvador@suse.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Tetsuo Handa authored
syzbot is hitting lockdep warning [1] due to trying to open a fifo during an execve() operation. But we don't need to open non regular files during an execve() operation, for all files which we will need are the executable file itself and the interpreter programs like /bin/sh and ld-linux.so.2 . Since the manpage for execve(2) says that execve() returns EACCES when the file or a script interpreter is not a regular file, and the manpage for uselib(2) says that uselib() can return EACCES, and we use FMODE_EXEC when opening for execve()/uselib(), we can bail out if a non regular file is requested with FMODE_EXEC set. Since this deadlock followed by khungtaskd warnings is trivially reproducible by a local unprivileged user, and syzbot's frequent crash due to this deadlock defers finding other bugs, let's workaround this deadlock until we get a chance to find a better solution. [1] https://syzkaller.appspot.com/bug?id=b5095bfec44ec84213bac54742a82483aad578ce Link: http://lkml.kernel.org/r/1552044017-7890-1-git-send-email-penguin-kernel@I-love.SAKURA.ne.jpReported-by: syzbot <syzbot+e93a80c1bb7c5c56e522461c149f8bf55eab1b2b@syzkaller.appspotmail.com> Fixes: 8924feff ("splice: lift pipe_lock out of splice_to_pipe()") Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Acked-by: Kees Cook <keescook@chromium.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Eric Biggers <ebiggers3@gmail.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: <stable@vger.kernel.org> [4.9+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Changbin Du authored
Add my email in the mailmap file to have a consistent shortlog output. Link: http://lkml.kernel.org/r/20190308142103.4929-1-changbin.du@gmail.comSigned-off-by: Changbin Du <changbin.du@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
atomic64_read() on ppc64le returns "long int", so fix the same way as commit d549f545 ("drm/virtio: use %llu format string form atomic64_t") by adding a cast to u64, which makes it work on all arches. In file included from ./include/linux/printk.h:7, from ./include/linux/kernel.h:15, from mm/debug.c:9: mm/debug.c: In function 'dump_mm': ./include/linux/kern_levels.h:5:18: warning: format '%llx' expects argument of type 'long long unsigned int', but argument 19 has type 'long int' [-Wformat=] #define KERN_SOH "A" /* ASCII Start Of Header */ ^~~~~~ ./include/linux/kern_levels.h:8:20: note: in expansion of macro 'KERN_SOH' #define KERN_EMERG KERN_SOH "0" /* system is unusable */ ^~~~~~~~ ./include/linux/printk.h:297:9: note: in expansion of macro 'KERN_EMERG' printk(KERN_EMERG pr_fmt(fmt), ##__VA_ARGS__) ^~~~~~~~~~ mm/debug.c:133:2: note: in expansion of macro 'pr_emerg' pr_emerg("mm %px mmap %px seqnum %llu task_size %lu" ^~~~~~~~ mm/debug.c:140:17: note: format string is defined here "pinned_vm %llx data_vm %lx exec_vm %lx stack_vm %lx" ~~~^ %lx Link: http://lkml.kernel.org/r/20190310183051.87303-1-cai@lca.pw Fixes: 70f8a3ca ("mm: make mm->pinned_vm an atomic64 counter") Signed-off-by: Qian Cai <cai@lca.pw> Acked-by: Davidlohr Bueso <dbueso@suse.de> Cc: Jason Gunthorpe <jgg@mellanox.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jan Kara authored
Aneesh has reported that PPC triggers the following warning when excercising DAX code: IP set_pte_at+0x3c/0x190 LR insert_pfn+0x208/0x280 Call Trace: insert_pfn+0x68/0x280 dax_iomap_pte_fault.isra.7+0x734/0xa40 __xfs_filemap_fault+0x280/0x2d0 do_wp_page+0x48c/0xa40 __handle_mm_fault+0x8d0/0x1fd0 handle_mm_fault+0x140/0x250 __do_page_fault+0x300/0xd60 handle_page_fault+0x18 Now that is WARN_ON in set_pte_at which is VM_WARN_ON(pte_hw_valid(*ptep) && !pte_protnone(*ptep)); The problem is that on some architectures set_pte_at() cannot cope with a situation where there is already some (different) valid entry present. Use ptep_set_access_flags() instead to modify the pfn which is built to deal with modifying existing PTE. Link: http://lkml.kernel.org/r/20190311084537.16029-1-jack@suse.cz Fixes: b2770da6 "mm: add vm_insert_mixed_mkwrite()" Signed-off-by: Jan Kara <jack@suse.cz> Reported-by: "Aneesh Kumar K.V" <aneesh.kumar@linux.ibm.com> Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Chandan Rajendra <chandan@linux.ibm.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Qian Cai authored
set_tag() compiles away when CONFIG_KASAN_SW_TAGS=n, so make arch_kasan_set_tag() a static inline function to fix warnings below. mm/kasan/common.c: In function '__kasan_kmalloc': mm/kasan/common.c:475:5: warning: variable 'tag' set but not used [-Wunused-but-set-variable] u8 tag; ^~~ Link: http://lkml.kernel.org/r/20190307185244.54648-1-cai@lca.pwSigned-off-by: Qian Cai <cai@lca.pw> Reviewed-by: Andrey Konovalov <andreyknvl@google.com> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 28 Mar, 2019 5 commits
-
-
David Howells authored
The marshalling of AFS.StoreData, AFS.StoreData64 and YFS.StoreData64 calls generated by ->setattr() ops for the purpose of expanding a file is incorrect due to older documentation incorrectly describing the way the RPC 'FileLength' parameter is meant to work. The older documentation says that this is the length the file is meant to end up at the end of the operation; however, it was never implemented this way in any of the servers, but rather the file is truncated down to this before the write operation is effected, and never expanded to it (and, indeed, it was renamed to 'TruncPos' in 2014). Fix this by setting the position parameter to the new file length and doing a zero-lengh write there. The bug causes Xwayland to SIGBUS due to unexpected non-expansion of a file it then mmaps. This can be tested by giving the following test program a filename in an AFS directory: #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <fcntl.h> #include <sys/mman.h> int main(int argc, char *argv[]) { char *p; int fd; if (argc != 2) { fprintf(stderr, "Format: test-trunc-mmap <file>\n"); exit(2); } fd = open(argv[1], O_RDWR | O_CREAT | O_TRUNC); if (fd < 0) { perror(argv[1]); exit(1); } if (ftruncate(fd, 0x140008) == -1) { perror("ftruncate"); exit(1); } p = mmap(NULL, 4096, PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); if (p == MAP_FAILED) { perror("mmap"); exit(1); } p[0] = 'a'; if (munmap(p, 4096) < 0) { perror("munmap"); exit(1); } if (close(fd) < 0) { perror("close"); exit(1); } exit(0); } Fixes: 31143d5d ("AFS: implement basic file write support") Reported-by: Jonathan Billings <jsbillin@umich.edu> Tested-by: Jonathan Billings <jsbillin@umich.edu> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Update the mount API docs to reflect recent changes to the code. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linuxLinus Torvalds authored
Pull s390 fixes from Martin Schwidefsky: "Improvements and bug fixes for 5.1-rc2: - Fix early free of the channel program in vfio - On AP device removal make sure that all messages are flushed with the driver still attached that queued the message - Limit brk randomization to 32MB to reduce the chance that the heap of ld.so is placed after the main stack - Add a rolling average for the steal time of a CPU, this will be needed for KVM to decide when to do busy waiting - Fix a warning in the CPU-MF code - Add a notification handler for AP configuration change to react faster to new AP devices" * tag 's390-5.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cpumf: Fix warning from check_processor_id zcrypt: handle AP Info notification from CHSC SEI command vfio: ccw: only free cp on final interrupt s390/vtime: steal time exponential moving average s390/zcrypt: revisit ap device remove procedure s390: limit brk randomization to 32MB
-
git://git.kernel.org/pub/scm/linux/kernel/git/soc/socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "A couple of minor fixes only for now - fix for incorrect DMA channels on Renesas R-Car - Broadcom bcm2835 error handling fixes - Kconfig dependency fixes for bcm2835 and davinci - CPU idle wakeup fix for i.MX6 - MMC regression on Tegra186 - fix incorrect phy settings on one imx board" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: arm64: tegra: Disable CQE Support for SDMMC4 on Tegra186 ARM: dts: nomadik: Fix polarity of SPI CS ARM: davinci: fix build failure with allnoconfig ARM: imx_v4_v5_defconfig: enable PWM driver ARM: imx_v6_v7_defconfig: continue compiling the pwm driver ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch ARM: dts: imx6qdl: Fix typo in imx6qdl-icore-rqs.dtsi ARM: dts: imx6ull: Use the correct style for SPDX License Identifier ARM: dts: pfla02: increase phy reset duration ARM: imx6q: cpuidle: fix bug that CPU might not wake up at expected time ARM: imx51: fix a leaked reference by adding missing of_node_put ARM: dts: imx6dl-yapp4: Use rgmii-id phy mode on the cpu port arm64: bcm2835: Add missing dependency on MFD_CORE. ARM: dts: bcm283x: Fix hdmi hpd gpio pull soc: bcm: bcm2835-pm: Fix error paths of initialization. soc: bcm: bcm2835-pm: Fix PM_IMAGE_PERI power domain support. arm64: dts: renesas: r8a774c0: Fix SCIF5 DMA channels arm64: dts: renesas: r8a77990: Fix SCIF5 DMA channels
-
Thomas Richter authored
Function __hw_perf_event_init() used a CPU variable without ensuring CPU preemption has been disabled. This caused the following warning in the kernel log: [ 7.277085] BUG: using smp_processor_id() in preemptible [00000000] code: cf-csdiag/1892 [ 7.277111] caller is cf_diag_event_init+0x13a/0x338 [ 7.277122] CPU: 10 PID: 1892 Comm: cf-csdiag Not tainted 5.0.0-20190318.rc0.git0.9e1a11e0f602.300.fc29.s390x+debug #1 [ 7.277131] Hardware name: IBM 2964 NC9 712 (LPAR) [ 7.277139] Call Trace: [ 7.277150] ([<000000000011385a>] show_stack+0x82/0xd0) [ 7.277161] [<0000000000b7a71a>] dump_stack+0x92/0xd0 [ 7.277174] [<00000000007b7e9c>] check_preemption_disabled+0xe4/0x100 [ 7.277183] [<00000000001228aa>] cf_diag_event_init+0x13a/0x338 [ 7.277195] [<00000000002cf3aa>] perf_try_init_event+0x72/0xf0 [ 7.277204] [<00000000002d0bba>] perf_event_alloc+0x6fa/0xce0 [ 7.277214] [<00000000002dc4a8>] __s390x_sys_perf_event_open+0x398/0xd50 [ 7.277224] [<0000000000b9e8f0>] system_call+0xdc/0x2d8 [ 7.277233] 2 locks held by cf-csdiag/1892: [ 7.277241] #0: 00000000976f5510 (&sig->cred_guard_mutex){+.+.}, at: __s390x_sys_perf_event_open+0xd2e/0xd50 [ 7.277257] #1: 00000000363b11bd (&pmus_srcu){....}, at: perf_event_alloc+0x52e/0xce0 The variable is now accessed in proper context. Use get_cpu_var()/put_cpu_var() pair to disable preemption during access. As the hardware authorization settings apply to all CPUs, it does not matter which CPU is used to check the authorization setting. Remove the event->count assignment. It is not needed as function perf_event_alloc() allocates memory for the event with kzalloc() and thus count is already set to zero. Fixes: fe5908bc ("s390/cpum_cf_diag: Add support for s390 counter facility diagnostic trace") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Hendrik Brueckner <brueckner@linux.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
-
- 27 Mar, 2019 1 commit
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "Fixes here and there, a couple new device IDs, as usual: 1) Fix BQL race in dpaa2-eth driver, from Ioana Ciornei. 2) Fix 64-bit division in iwlwifi, from Arnd Bergmann. 3) Fix documentation for some eBPF helpers, from Quentin Monnet. 4) Some UAPI bpf header sync with tools, also from Quentin Monnet. 5) Set descriptor ownership bit at the right time for jumbo frames in stmmac driver, from Aaro Koskinen. 6) Set IFF_UP properly in tun driver, from Eric Dumazet. 7) Fix load/store doubleword instruction generation in powerpc eBPF JIT, from Naveen N. Rao. 8) nla_nest_start() return value checks all over, from Kangjie Lu. 9) Fix asoc_id handling in SCTP after the SCTP_*_ASSOC changes this merge window. From Marcelo Ricardo Leitner and Xin Long. 10) Fix memory corruption with large MTUs in stmmac, from Aaro Koskinen. 11) Do not use ipv4 header for ipv6 flows in TCP and DCCP, from Eric Dumazet. 12) Fix topology subscription cancellation in tipc, from Erik Hugne. 13) Memory leak in genetlink error path, from Yue Haibing. 14) Valid control actions properly in packet scheduler, from Davide Caratti. 15) Even if we get EEXIST, we still need to rehash if a shrink was delayed. From Herbert Xu. 16) Fix interrupt mask handling in interrupt handler of r8169, from Heiner Kallweit. 17) Fix leak in ehea driver, from Wen Yang" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (168 commits) dpaa2-eth: fix race condition with bql frame accounting chelsio: use BUG() instead of BUG_ON(1) net: devlink: skip info_get op call if it is not defined in dumpit net: phy: bcm54xx: Encode link speed and activity into LEDs tipc: change to check tipc_own_id to return in tipc_net_stop net: usb: aqc111: Extend HWID table by QNAP device net: sched: Kconfig: update reference link for PIE net: dsa: qca8k: extend slave-bus implementations net: dsa: qca8k: remove leftover phy accessors dt-bindings: net: dsa: qca8k: support internal mdio-bus dt-bindings: net: dsa: qca8k: fix example net: phy: don't clear BMCR in genphy_soft_reset bpf, libbpf: clarify bump in libbpf version info bpf, libbpf: fix version info and add it to shared object rxrpc: avoid clang -Wuninitialized warning tipc: tipc clang warning net: sched: fix cleanup NULL pointer exception in act_mirr r8169: fix cable re-plugging issue net: ethernet: ti: fix possible object reference leak net: ibm: fix possible object reference leak ...
-
- 26 Mar, 2019 17 commits
-
-
git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds authored
Pull NFS client bugfixes from Trond Myklebust: "Highlights include: Stable fixes: - Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data() - fix mount/umount race in nlmclnt. - NFSv4.1 don't free interrupted slot on open Bugfixes: - Don't let RPC_SOFTCONN tasks time out if the transport is connected - Fix a typo in nfs_init_timeout_values() - Fix layoutstats handling during read failovers - fix uninitialized variable warning" * tag 'nfs-for-5.1-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: SUNRPC: fix uninitialized variable warning pNFS/flexfiles: Fix layoutstats handling during read failovers NFS: Fix a typo in nfs_init_timeout_values() SUNRPC: Don't let RPC_SOFTCONN tasks time out if the transport is connected NFSv4.1 don't free interrupted slot on open NFS: fix mount/umount race in nlmclnt. NFS: Fix nfs4_lock_state refcounting in nfs4_alloc_{lock,unlock}data()
-
Alakesh Haloi authored
Avoid following compiler warning on uninitialized variable net/sunrpc/xprtsock.c: In function ‘xs_read_stream_request.constprop’: net/sunrpc/xprtsock.c:525:10: warning: ‘read’ may be used uninitialized in this function [-Wmaybe-uninitialized] return read; ^~~~ net/sunrpc/xprtsock.c:529:23: warning: ‘ret’ may be used uninitialized in this function [-Wmaybe-uninitialized] return ret < 0 ? ret : read; ~~~~~~~~~~~~~~^~~~~~ Signed-off-by: Alakesh Haloi <alakesh.haloi@gmail.com> Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
-
Ioana Ciornei authored
It might happen that Tx conf acknowledges a frame before it was subscribed in bql, as subscribing was previously done after the enqueue operation. This patch moves the netdev_tx_sent_queue call before the actual frame enqueue, so that this can never happen. Fixes: 569dac6a ("dpaa2-eth: bql support") Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Arnd Bergmann authored
clang warns about possible bugs in a dead code branch after BUG_ON(1) when CONFIG_PROFILE_ALL_BRANCHES is enabled: drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: error: variable 'buf_size' is used uninitialized whenever 'if' condition is false [-Werror,-Wsometimes-uninitialized] BUG_ON(1); ^~~~~~~~~ include/asm-generic/bug.h:61:36: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^~~~~~~~~~~~~~~~~~~ include/linux/compiler.h:48:23: note: expanded from macro 'unlikely' # define unlikely(x) (__branch_check__(x, 0, __builtin_constant_p(x))) ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:482:9: note: uninitialized use occurs here return buf_size; ^~~~~~~~ drivers/net/ethernet/chelsio/cxgb4/sge.c:479:3: note: remove the 'if' if its condition is always true BUG_ON(1); ^ include/asm-generic/bug.h:61:32: note: expanded from macro 'BUG_ON' #define BUG_ON(condition) do { if (unlikely(condition)) BUG(); } while (0) ^ drivers/net/ethernet/chelsio/cxgb4/sge.c:459:14: note: initialize the variable 'buf_size' to silence this warning int buf_size; ^ = 0 Use BUG() here to create simpler code that clang understands correctly. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Jiri Pirko authored
In dumpit, unlike doit, the check for info_get op being defined is missing. Add it and avoid null pointer dereference in case driver does not define this op. Fixes: f9cf2288 ("devlink: add device information API") Reported-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Jiri Pirko <jiri@mellanox.com> Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Previously the green and amber LEDs on this quad PHY were solid, to indicate an encoding of the link speed (10/100/1000). This keeps the LEDs always on just as before, but now they flash on Rx/Tx activity. Signed-off-by: Vladimir Oltean <olteanv@gmail.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Xin Long authored
When running a syz script, a panic occurred: [ 156.088228] BUG: KASAN: use-after-free in tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.094315] Call Trace: [ 156.094844] <IRQ> [ 156.095306] dump_stack+0x7c/0xc0 [ 156.097346] print_address_description+0x65/0x22e [ 156.100445] kasan_report.cold.3+0x37/0x7a [ 156.102402] tipc_disc_timeout+0x9c9/0xb20 [tipc] [ 156.106517] call_timer_fn+0x19a/0x610 [ 156.112749] run_timer_softirq+0xb51/0x1090 It was caused by the netns freed without deleting the discoverer timer, while later on the netns would be accessed in the timer handler. The timer should have been deleted by tipc_net_stop() when cleaning up a netns. However, tipc has been able to enable a bearer and start d->timer without the local node_addr set since Commit 52dfae5c ("tipc: obtain node identity from interface by default"), which caused the timer not to be deleted in tipc_net_stop() then. So fix it in tipc_net_stop() by changing to check local node_id instead of local node_addr, as Jon suggested. While at it, remove the calling of tipc_nametbl_withdraw() there, since tipc_nametbl_stop() will take of the nametbl's freeing after. Fixes: 52dfae5c ("tipc: obtain node identity from interface by default") Reported-by: syzbot+a25307ad099309f1c2b9@syzkaller.appspotmail.com Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Ying Xue <ying.xue@windriver.com> Acked-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Dmitry Bezrukov authored
New device of QNAP based on aqc111u Add this ID to blacklist of cdc_ether driver as well Signed-off-by: Dmitry Bezrukov <dmitry.bezrukov@aquantia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Leslie Monis authored
RFC 8033 replaces the IETF draft for PIE Signed-off-by: Leslie Monis <lesliemonis@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
This patch implements accessors for the QCA8337 MDIO access through the MDIO_MASTER register, which makes it possible to access the PHYs on slave-bus through the switch. In cases where the switch ports are already mapped via external "phy-phandles", the internal mdio-bus is disabled in order to prevent a duplicated discovery and enumeration of the same PHYs. Don't use mixed external and internal mdio-bus configurations, as this is not supported by the hardware. Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
This belated patch implements Andrew Lunn's request of "remove the phy_read() and phy_write() functions." <https://lore.kernel.org/patchwork/comment/902734/> While seemingly harmless, this causes the switch's user port PHYs to get registered twice. This is because the DSA subsystem will create a slave mdio-bus not knowing that the qca8k_phy_(read|write) accessors operate on the external mdio-bus. So the same "bus" gets effectively duplicated. Cc: stable@vger.kernel.org Fixes: 6b93fb46 ("net-next: dsa: add new driver for qca8xxx family") Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
This patch updates the qca8k's binding to document to the approach for using the internal mdio-bus of the supported qca8k switches. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Christian Lamparter authored
In the example, the phy at phy@0 is clashing with the switch0@0 at the same address. Usually, the switches are accessible through pseudo PHYs which in case of the qca8k are located at 0x10 - 0x18. Reviewed-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linuxLinus Torvalds authored
Pull btrfs fixes from David Sterba: - fsync fixes: i_size for truncate vs fsync, dio vs buffered during snapshotting, remove complicated but incomplete assertion - removed excessive warnigs, misreported device stats updates - fix raid56 page mapping for 32bit arch - fixes reported by static analyzer * tag 'for-5.1-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: Btrfs: fix assertion failure on fsync with NO_HOLES enabled btrfs: Avoid possible qgroup_rsv_size overflow in btrfs_calculate_inode_block_rsv_size btrfs: Fix bound checking in qgroup_trace_new_subtree_blocks btrfs: raid56: properly unmap parity page in finish_parity_scrub() btrfs: don't report readahead errors and don't update statistics Btrfs: fix file corruption after snapshotting due to mix of buffered/DIO writes btrfs: remove WARN_ON in log_dir_items Btrfs: fix incorrect file size after shrinking truncate and fsync
-
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-traceLinus Torvalds authored
Pull tracing fixes from Steven Rostedt: "Three small fixes: - A fix to a double free in the histogram code - Uninitialized variable fix - Use NULL instead of zero fix and spelling fixes" * tag 'trace-v5.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace: ftrace: Fix warning using plain integer as NULL & spelling corrections tracing: initialize variable in create_dyn_event() tracing: Remove unnecessary var_ref destroy in track_data_destroy()
-
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linuxLinus Torvalds authored
Pull file locking bugfix from Jeff Layton: "Just a single fix for a bug that crept into POSIX lock deadlock detection in v5.0" * tag 'locks-v5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: wake any locks blocked on request before deadlock check
-
Hariprasad Kelam authored
Changed 0 --> NULL to avoid sparse warning Corrected spelling mistakes reported by checkpatch.pl Sparse warning below: sudo make C=2 CF=-D__CHECK_ENDIAN__ M=kernel/trace CHECK kernel/trace/ftrace.c kernel/trace/ftrace.c:3007:24: warning: Using plain integer as NULL pointer kernel/trace/ftrace.c:4758:37: warning: Using plain integer as NULL pointer Link: http://lkml.kernel.org/r/20190323183523.GA2244@hari-Inspiron-1545Signed-off-by: Hariprasad Kelam <hariprasad.kelam@gmail.com> Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
-