1. 31 Jan, 2004 8 commits
  2. 30 Jan, 2004 2 commits
  3. 31 Jan, 2004 10 commits
  4. 30 Jan, 2004 11 commits
    • Nathan Scott's avatar
      [XFS] Fix a warning from some gcc variants after recent flags botch. · 2c640f57
      Nathan Scott authored
      SGI Modid: xfs-linux:xfs-kern:165646a
      2c640f57
    • Russell Cattelan's avatar
      [XFS] Christoph has signed over copyrights · 2637a95b
      Russell Cattelan authored
      SGI Modid: xfs-linux:xfs-kern:165037a
      2637a95b
    • Marcelo Tosatti's avatar
      [PATCH] PC300 update · f4cc0838
      Marcelo Tosatti authored
      This forward ports a few important fixes from the 2.4 driver.  This
      changes have been well tested.
      
      Changelog:
       - Update maintainer email address
       - Mark pci_device_id list with __devinitdata.
       - Set correct protocol type on packet receive (this caused the kernel to
         drop all packets received)
       - Add #ifdef DEBUG around debug printk()
       - ioctl: Add missing size checks before
         copying data from userspace.
      f4cc0838
    • Linus Torvalds's avatar
      Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk · 60f63ed0
      Linus Torvalds authored
      into home.osdl.org:/home/torvalds/v2.5/linux
      60f63ed0
    • Russell King's avatar
      [ARM] Remove FP work-arounds. · 87eb058e
      Russell King authored
      We used to have code to allow binaries linked against glibc to run,
      when glibc itself contained some FP instructions (for PCS stack
      frames for functions like printf and scanf) thereby allowing FP
      emulators like nwfpe to be built as modules.
      
      This has proved to be unreliable with later compilers, so support
      for this was dropped a while ago.  Since no one complained, we can
      finally remove the dead code.
      
      (NB. a klibc based module-init-tools shouldn't suffer from this
      problem.)
      87eb058e
    • Russell King's avatar
      db1708fb
    • Russell King's avatar
      [ARM] Fix bitops pointer qualifiers. · 4abebca3
      Russell King authored
      According to x86, the pointers for bitops are supposed to be
      qualified with volatile.  Make ARM bitops reflect this.
      4abebca3
    • Russell King's avatar
      [ARM] Eliminate tsk->used_math · 41754b1f
      Russell King authored
      Remove usage of tsk->used_math on ARM, moving the status to an array
      of co-processor usage.  (ARM can have up to 15 co-processors
      providing various extra facilities such as SIMD, VFP or FP.)
      41754b1f
    • Linus Torvalds's avatar
      Fix sha256 padding block initializer to be static. · ae05f3fa
      Linus Torvalds authored
      Jakub points out that having an automatic array is not only
      bad for performance (and stack usage), gcc has also historically
      had lots of bugs here, and gcc-3.2.3 seems to miscompile it
      otherwise.
      ae05f3fa
    • Michael Hunold's avatar
      [PATCH] dvb subsystem and saa7146 v4l fixes · 586a9edd
      Michael Hunold authored
      This fixes some issues in the dvb subsystem and some nasty things in the
      v4l saa7146 driver.
      
      [DVB]
       - dvb-core: aquire -> acquire spelling fix
       - nxt600 frontend: don't send zero-byte messages when probing the PLL
         type
       - Kconfig: add a note that says that the CI of the budget-CI card is
         not actually supported by the budget-CI driver
       - ttusb-dec: Check for presence of crc32 function.  Make unknown types
         of packet less likely to cause packet loss.
      
      [V4L]
       - saa7146: use kernel mint_t()/max_t() instead of homebrewn stuff
       - saa7146: disable video clipping before capturing for sure to prevent
         black pictures
       - saa7146: make sure to disable the right video dma upon device close
       - saa7146: don't free resources if disabling an already disabled video
         overlay
      586a9edd
    • Dominik Brodowski's avatar
      [PATCH] Validate ACPI CPU frequency values · a71d72ce
      Dominik Brodowski authored
      This is a simple fix for some of the problems with bad ACPI frequency values:
      
        Abort if the frequency field in _PSS is zero, as we're having a
        completely broken ACPI table then.
      
      A more complete overhaul of the acpi-cpufreq driver (where the cause of
      the problem lies) is in the latest acpi-test tree, but that's definitely
      something to be delayed for 2.6.3 -- and the same is true for the
      yet-to-be-written do_div64 conversion.
      a71d72ce
  5. 29 Jan, 2004 9 commits
    • Michael Schierl's avatar
      [PATCH] [APM] Is this the correct way to fix suspend bug introduced · 87903ac5
      Michael Schierl authored
      This fixes my APM problems (without them my laptop, Acer TravelMate
      210TEV (Celeron 700, 128 MB RAM), hangs after resuming from APM since
      2.6.0-test4).
      
      Modified based on comments from Pavel Machek <pavel@suse.cz>, who
      has acked the updated patch.
      87903ac5
    • Greg Kroah-Hartman's avatar
    • Kieran Morrissey's avatar
      [PATCH] PCI: pci.ids update · 07d880ac
      Kieran Morrissey authored
      - Replaces pci.ids with a snapshot from pciids.sf.net from 14 Jan 2004
      07d880ac
    • Kieran Morrissey's avatar
      [PATCH] PCI: name length change · 6a1bd126
      Kieran Morrissey authored
      - Changes gen-devlist.c to truncate long device names rather than reject
        the database
      - Changes PCI_NAME_SIZE to 96 (and PCI_NAME_HALF to 43) to allow all
        current pci.ids names to fit
      - Modifies gen-devlist.c to truncate at 89 characters rather than 79 -
        allows for two digit instance numbers to be added to the name as well
        while staying within the 96 characters allocated. No names in the
        current pci.ids are any longer than this.
      - Modifies names.c to no longer limit device name length when displaying
        both vendor and device name; the truncation is done by gen-devlist.c.
      6a1bd126
    • John Rose's avatar
      [PATCH] PCI: Allow pci hotplug drivers to initialize individual devices. · b323e1df
      John Rose authored
      This lets the PPC pci hotplug driver initialize single devices, not just
      entire slots.
      b323e1df
    • Leann Ogasawara's avatar
      [PATCH] PCI hotplug: pcihp_zt5550.c ioremap/iounmap audit · 66f070ba
      Leann Ogasawara authored
      insert missing iounmap()
      66f070ba
    • Ralf Bächle's avatar
      68e0f3a0
    • Linda Xie's avatar
    • Takayoshi Kochi's avatar
      [PATCH] PCI Hotplug: add address file and fix acpiphp bugs · 272b06a8
      Takayoshi Kochi authored
      This is the pending patch that adds 'address' file to show
      PCI-address and a few other minor fixes.
      As 2.6.0 is out, I'm resending the patch.
      Would you mind taking this?
      
      > > > Thanks.  I had a little time to try your patch today.  Sorry
      > > > to report that it isn't working for me.
      > > >
      > > > I first powered off (successfully the 1st time) a populated slot
      > > > and removed and reinserted the card into the same slot.  The slot
      > > > powered back up but I was then unable to power it off.  I believe
      > > > the following instruction that still exists in power_off_slot()
      > > > may be preventing the slot from being powered off more than once.
      > > >     func->flags &= (~FUNC_EXISTS);
      > > >
      > > > I then tried to insert an adapter in an un-populated slot.  For
      > > > some reason (which I don't understand yet) there was an enabling
      > > > error which I believe caused enable_device() to exit via a path
      > > > that bypassed the instruction that sets the FUNC_EXISTS flag.
      > > > I was then unable to power off the slot which I believe was due
      > > > to the FUNC_EXISTS flag not being set.
      > > >
      > > > I didn't have time to definitely confirmed the above theories.
      > > > I'll take a closer look at this tomorrow unless you are able
      > > > to diagnose using my vague clues :)
      > >
      > > It turns out that both of the above mentioned problems happened
      > > because the call to acpiphp_configure_slot() from enable_device()
      > > failed after inserting the card.  When this happens enable_device()
      > > exits without setting the FUNC_EXISTS flag for any of the slot
      > > functions.  Subsequent attempts to power off the same slot fail
      > > when power_off_slot() is unable to locate a function with both
      > > FUNC_HAS_EJ0 and FUNC_EXISTS flags set.
      > >
      > > The patch works okay when using a card that allows
      > > acpiphp_configure_slot() to succeed but I believe it should
      > > be improved to allow the slot to be powered off following
      > > device enablement errors.
      >
      > Thanks for testing and comments.
      > I really appreciate it.
      >
      > This problem turned out to be somewhat fragile state
      > transition:
      >
      > a lifecycle of a slot is (if there's no error)
      >
      >   function             state
      > ----------------------------------------------------
      > 0                      nothing
      > 1  power_on_slot()  -> SLOT_POWERDON
      > 2  enable_device()  -> SLOT_POWEREDON + SLOT_ENABLED
      > 3  disable_device() -> SLOT_POWEREDON
      > 4  power_off_slot() -> nothing
      >
      > but if any error occur during enable_device(), slot will remain
      > SLOT_POWERDON, but some functions on the card may not have
      > FUNC_EXISTS flags, which will eventually prevents powering
      > off in power_off_slot(), state transition from 1 to 4 directly.
      > I.e, the FUNC_EXISTS flag introduced more states to
      > complicate things.
      >
      > The FUNC_EXISTS flag was introduced after some discussion
      > between me and Irene Zubarev, but it has no more meaning
      > than that the function has corresponding 'pci_dev' structure.
      > So I eliminated the usage of FUNC_EXISTS and the result is
      > the patches attached to this mail (for both 2.4 and 2.6.
      > I think Greg already applied the 2.4 'cleanup' patch to his tree,
      > but it's not in Marcelo's release so I'm re-attaching to
      > this mail for anyone interested in this topic.  It's identical
      > to the one I posted earlier).
      > These patches don't include Gary's patch in his post last week,
      > so please apply separately.
      >
      > Please note that current acpiphp driver cannot handle a
      > PCI card that has a PCI-to-PCI bridge on it (support
      > for such cards is incomplete).  But if it's treated as
      > an error, it should be recoverable anyway.
      272b06a8