Skip to content

L
linux
Switch branch/tag
  1. 10 Sep, 2012 1 commit
    • Mark Brown's avatar
      regulator: core: Support bypass mode · f59c8f9f
      Mark Brown authored 
      Many regulators support a bypass mode where they simply switch their
input supply to the output. This is mainly used in low power retention
states where power consumption is extremely low so higher voltage or
less clean supplies can be used.

Support this by providing ops for the drivers and a consumer API which
allows the device to be put into bypass mode if all consumers enable it
and the machine enables permission for this.

This is not supported as a mode since the existing modes are rarely used
due to fuzzy definition and mostly redundant with modern hardware which is
able to respond promptly to load changes.
Signed-off-by: default avatarMark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: default avatarGraeme Gregory <gg@slimlogic.co.uk>
      f59c8f9f
  3. 01 Sep, 2012 5 commits
  5. 30 Aug, 2012 5 commits
  7. 29 Aug, 2012 18 commits
  9. 28 Aug, 2012 11 commits
    • Stefan Behrens's avatar
      Btrfs: fix that repair code is spuriously executed for transid failures · 256dd1bb
      Stefan Behrens authored 
      If verify_parent_transid() fails for all mirrors, the current code
calls repair_io_failure() anyway which means:
- that the disk block is rewritten without repairing anything and
- that a kernel log message is printed which misleadingly claims
  that a read error was corrected.

This is an example:
parent transid verify failed on 615015833600 wanted 110423 found 110424
parent transid verify failed on 615015833600 wanted 110423 found 110424
btrfs read error corrected: ino 1 off 615015833600 (dev /dev/...)

It is wrong to ignore the results from verify_parent_transid() and to
call repair_eb_io_failure() when the verification of the transids failed.
This commit fixes the issue.
Signed-off-by: default avatarStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      256dd1bb
    • Liu Bo's avatar
      Btrfs: fix ordered extent leak when failing to start a transaction · d280e5be
      Liu Bo authored 
      We cannot just return error before freeing ordered extent and releasing reserved
space when we fail to start a transacion.
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      d280e5be
    • Liu Bo's avatar
      Btrfs: fix a dio write regression · 24c03fa5
      Liu Bo authored 
      This bug is introduced by commit 3b8bde746f6f9bd36a9f05f5f3b6e334318176a9
(Btrfs: lock extents as we map them in DIO).

In dio write, we should unlock the section which we didn't do IO on in case that
we fall back to buffered write.  But we need to not only unlock the section
but also cleanup reserved space for the section.

This bug was found while running xfstests 133, with this 133 no longer complains.
Signed-off-by: default avatarLiu Bo <bo.li.liu@oracle.com>
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      24c03fa5
    • Josef Bacik's avatar
      Btrfs: fix deadlock with freeze and sync V2 · bd7de2c9
      Josef Bacik authored 
      We can deadlock with freeze right now because we unconditionally start a
transaction in our ->sync_fs() call.  To fix this just check and see if we
have a running transaction to commit.  This saves us from the deadlock
because at this point we'll have the umount sem for the sb so we're safe
from freezes coming in after we've done our check.  With this patch the
freeze xfstests no longer deadlocks.  Thanks,
Signed-off-by: default avatarJosef Bacik <jbacik@fusionio.com>
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      bd7de2c9
    • Stefan Behrens's avatar
      Btrfs: revert checksum error statistic which can cause a BUG() · 5ee0844d
      Stefan Behrens authored 
      Commit 442a4f63 added btrfs device
statistic counters for detected IO and checksum errors to Linux 3.5.
The statistic part that counts checksum errors in
end_bio_extent_readpage() can cause a BUG() in a subfunction:
"kernel BUG at fs/btrfs/volumes.c:3762!"
That part is reverted with the current patch.
However, the counting of checksum errors in the scrub context remains
active, and the counting of detected IO errors (read, write or flush
errors) in all contexts remains active.

Cc: stable <stable@vger.kernel.org> # 3.5
Signed-off-by: default avatarStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: default avatarChris Mason <chris.mason@oracle.com>
      5ee0844d
    • Stefan Behrens's avatar
      Btrfs: remove superblock writing after fatal error · 68ce9682
      Stefan Behrens authored 
      With commit acce952b, btrfs was changed to flag the filesystem with
BTRFS_SUPER_FLAG_ERROR and switch to read-only mode after a fatal
error happened like a write I/O errors of all mirrors.
In such situations, on unmount, the superblock is written in
btrfs_error_commit_super(). This is done with the intention to be able
to evaluate the error flag on the next mount. A warning is printed
in this case during the next mount and the log tree is ignored.

The issue is that it is possible that the superblock points to a root
that was not written (due to write I/O errors).
The result is that the filesystem cannot be mounted. btrfsck also does
not start and all the other btrfs-progs tools fail to start as well.
However, mount -o recovery is working well and does the right things
to recover the filesystem (i.e., don't use the log root, clear the
free space cache and use the next mountable root that is stored in the
root backup array).

This patch removes the writing of the superblock when
BTRFS_SUPER_FLAG_ERROR is set, and removes the handling of the error
flag in the mount function.

These lines can be used to reproduce the issue (using /dev/sdm):
SCRATCH_DEV=/dev/sdm
SCRATCH_MNT=/mnt
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup create foo
ls -alLF /dev/mapper/foo
mkfs.btrfs /dev/mapper/foo
mount /dev/mapper/foo $SCRATCH_MNT
echo bar > $SCRATCH_MNT/foo
sync
echo 0 25165824 error | dmsetup reload foo
dmsetup resume foo
ls -alF $SCRATCH_MNT
touch $SCRATCH_MNT/1
ls -alF $SCRATCH_MNT
sleep 35
echo 0 25165824 linear $SCRATCH_DEV 0 | dmsetup reload foo
dmsetup resume foo
sleep 1
umount $SCRATCH_MNT
btrfsck /dev/mapper/foo
dmsetup remove foo
Signed-off-by: default avatarStefan Behrens <sbehrens@giantdisaster.de>
Signed-off-by: default avatarJan Schmidt <list.btrfs@jan-o-sch.net>
      68ce9682
    • Josef Bacik's avatar
      Btrfs: allow delayed refs to be merged · ae1e206b
      Josef Bacik authored 
      Daniel Blueman reported a bug with fio+balance on a ramdisk setup.
Basically what happens is the balance relocates a tree block which will drop
the implicit refs for all of its children and adds a full backref.  Once the
block is relocated we have to add the implicit refs back, so when we cow the
block again we add the implicit refs for its children back.  The problem
comes when the original drop ref doesn't get run before we add the implicit
refs back.  The delayed ref stuff will specifically prefer ADD operations
over DROP to keep us from freeing up an extent that will have references to
it, so we try to add the implicit ref before it is actually removed and we
panic.  This worked fine before because the add would have just canceled the
drop out and we would have been fine.  But the backref walking work needs to
be able to freeze the delayed ref stuff in time so we have this ever
increasing sequence number that gets attached to all new delayed ref updates
which makes us not merge refs and we run into this issue.

So to fix this we need to merge delayed refs.  So everytime we run a
clustered ref we need to try and merge all of its delayed refs.  The backref
walking stuff locks the delayed ref head before processing, so if we have it
locked we are safe to merge any refs inside of the sequence number.  If
there is no sequence number we can merge all refs.  Doing this not only
fixes our bug but keeps the delayed ref code from adding and removing
useless refs and batching together multiple refs into one search instead of
one search per delayed ref, which will really help our commit times.  I ran
this with Daniels test and 276 and I haven't seen any problems.  Thanks,
Reported-by: default avatarDaniel J Blueman <daniel@quora.org>
Signed-off-by: default avatarJosef Bacik <jbacik@fusionio.com>
      ae1e206b
    • Josef Bacik's avatar
      Btrfs: fix enospc problems when deleting a subvol · 5a24e84c
      Josef Bacik authored 
      Subvol delete is a special kind of awful where we use the global reserve to
cover the ENOSPC requirements.  The problem is once we're done removing
everything we do a btrfs_update_inode(), which by default will try to do the
delayed update stuff which will use it's own reserve.  There will be no
space in this reserve and we'll return ENOSPC.  So instead use
btrfs_update_inode_fallback() which will just fallback to updating the inode
item in the case of enospc.  This is fine because the global reserve covers
the space requirements for this.  With this patch I can now delete a subvol
on a problem image Dave Sterba sent me.  Thanks,
Reported-by: default avatarDavid Sterba <dave@jikos.cz>
Signed-off-by: default avatarJosef Bacik <jbacik@fusionio.com>
Signed-off-by: default avatarChris Mason <chris.mason@fusionio.com>
      5a24e84c
    • Miao Xie's avatar
      Btrfs: fix wrong mtime and ctime when creating snapshots · c0f62ded
      Miao Xie authored 
      When we created a new snapshot, the mtime and ctime of its parent directory
were not updated. Fix it.
Signed-off-by: default avatarMiao Xie <miaox@cn.fujitsu.com>
Signed-off-by: default avatarChris Mason <chris.mason@fusionio.com>
      c0f62ded
    • Arne Jansen's avatar
      Btrfs: fix race in run_clustered_refs · 22cd2e7d
      Arne Jansen authored 
      With commit

commit d1270cd9
Author: Arne Jansen <sensille@gmx.net>
Date:   Tue Sep 13 15:16:43 2011 +0200

     Btrfs: put back delayed refs that are too new

I added a window where the delayed_ref's head->ref_mod code can diverge
from the sum of the remaining refs, because we release the head->mutex
in the middle. This leads to btrfs_lookup_extent_info returning wrong
numbers. This patch fixes this by adjusting the head's ref_mod with each
delayed ref we run.
Signed-off-by: default avatarArne Jansen <sensille@gmx.net>
Signed-off-by: default avatarChris Mason <chris.mason@fusionio.com>
      22cd2e7d
    • Chris Mason's avatar
      Btrfs: don't run __tree_mod_log_free_eb on leaves · b12a3b1e
      Chris Mason authored 
      When we split a leaf, we may end up inserting a new root on top of that
leaf.  The reflog code was incorrectly assuming the old root was always
a node.  This makes sure we skip over leaves.
Signed-off-by: default avatarChris Mason <chris.mason@fusionio.com>
      b12a3b1e
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7