- 04 May, 2016 6 commits
-
-
Andrew F. Davis authored
Fix kernel-doc formatting for structs, and while we are making little fixes, clarify the module description and update the copywrite. Signed-off-by:
Andrew F. Davis <afd@ti.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org>
-
Daniel Baluta authored
Signed-off-by:
Daniel Baluta <daniel.baluta@intel.com> Signed-off-by:
-
Stefan Wahren authored
Disabling of the touchscreen IRQs should be done in mxs_lradc_disable_ts. So disable only the masked virtual channels in mxs_lradc_hw_stop and finally remove the unused function mxs_lradc_irq_en_mask. Signed-off-by:
Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by:
Marek Vasut <marex@denx.de> Tested-by:
-
Stefan Wahren authored
After using devm_input_allocate_device for registration the function mxs_lradc_ts_unregister isn't necessary anymore since mxs_lradc_ts_close already does the job. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by:
-
Stefan Wahren authored
This patch simplifies the TS registration of mxs-lradc by using devm_input_allocate_device. Signed-off-by:
-
Constantin Musca authored
Minimal implementation of an IIO driver for the Freescale MMA7660FC 3-axis accelerometer. Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MMA7660FC.pdf Includes: - ACPI support; - read_raw for x,y,z axes; - reading and setting the scale (range) parameter. - power management Signed-off-by:
Constantin Musca <constantin.musca@intel.com> Reviewed-by:
Martin Klepplinger <martink@posteo.de> Signed-off-by:
-
- 01 May, 2016 1 commit
-
-
Crestez Dan Leonard authored
The device has simple 8-bit registers but the driver incorrectly uses block or word reads without checking functionality bits. Fix by using i2c_smbus_read_i2c_block_data_or_emulated instead of i2c_smbus_read_i2c_block_data or i2c_smbus_read_word_data. This will check functionality bits and use the fastest available transfer method. Signed-off-by:
Crestez Dan Leonard <leonard.crestez@intel.com> Signed-off-by:
-
- 25 Apr, 2016 7 commits
-
-
Crestez Dan Leonard authored
This device is a package containing a MPU6050-like sensor and an AK8975 magnetometer. The magnetometer component is supported by the existing ak8975 driver. This patch also rephrases the Kconfig descriptions. Signed-off-by:
Ge Gao <ggao@invensense.com> Signed-off-by:
-
Crestez Dan Leonard authored
Signed-off-by:
-
Crestez Dan Leonard authored
This can be used to distinguish mpu6500. This is a warning rather than an error because the differences are mostly irrelevant and it's nice to avoid breaking users with slightly incorrect ACPI/DT. Signed-off-by:
-
Crestez Dan Leonard authored
This field was unused and incorrect for mpu6500. Signed-off-by:
-
Crestez Dan Leonard authored
The hw_info array was indexed by enum inv_devices chip_type despite the fact that the enumeration had more members than the array and was ordered differently. The patch cleans this up and adds explicit chip_types to i2c/spi/acpi IDs. It also adds some stricter checks inside the driver core. This happened to work so far because the differences between the supported models are very minor. Signed-off-by:
-
Akinobu Mita authored
This adds ability to control the oversampling ratio of the temperature and pressure measurement for both bmp180 and bmp280. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Acked-by:
Vlad Dogaru <vlad.dogaru@intel.com> Cc: Christoph Mair <christoph.mair@gmail.com> Signed-off-by:
-
Akinobu Mita authored
This adds support for the BMP180 to the bmp280 iio driver. The BMP180 has already been supported by misc/bmp085 driver but it doesn't use iio framework. This change adds the kconfig dependency not to be selected both of them in order to avoid any issues. Signed-off-by:
-
- 24 Apr, 2016 8 commits
-
-
Crestez Dan Leonard authored
Signed-off-by:
-
Crestez Dan Leonard authored
This patch exposes ALSTIM as illuminance_integration_time and ALSPGA as illuminance_scale. Changing ALSTIM also changes the number of bits available in the data register. This is handled inside raw value reading because: * It's very easy to shift a few bits * It allows SCALE and INT_TIME to be completely independent controls * Buffer support requires constant scan_type.realbits per-channel Signed-off-by:
-
Crestez Dan Leonard authored
This is exposed as an output channel with "led" as an extend_name. Other sensors also have support for controlling an external LED. It's not clear that simply exposing an undecorated output channel is the correct approach. Signed-off-by:
-
Crestez Dan Leonard authored
The proximity sensor relies on sending pulses to an external IR led and it is disabled by default on powerup. The driver will enable it with a default power setting. Signed-off-by:
-
Crestez Dan Leonard authored
This just adds support for reporting illuminance with default settings. Important default registers are written on probe because the device otherwise lacks a reset function. Signed-off-by:
-
Tiberiu Breana authored
Signed-off-by:
Tiberiu Breana <tiberiu.a.breana@intel.com> Signed-off-by:
-
Tiberiu Breana authored
Add basic support for the Aosong AM2315 relative humidity and ambient temperature sensor. Includes support for raw readings and ACPI detection. Datasheet: http://www.aosong.com/asp_bin/Products/en/AM2315.pdfSigned-off-by:
-
Marek Vasut authored
Add support for HopeRF pressure and temperature sensor. This device uses two fixed I2C addresses, one for storing calibration coefficients and another for accessing the ADC. Signed-off-by:
-
- 23 Apr, 2016 5 commits
-
-
Crestez Dan Leonard authored
This device has an identical interface to other supported sensors and the patch only adds IDs. Signed-off-by:
-
Dan Carpenter authored
It causes a static checker warning if we use "buf" on the failure path so move that inside the if statement. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Gregor Boirie authored
Add a new rotation matrix sysfs attribute compliant with IIO core mounting matrix API. Matrix is retrieved from "in_anglvel_mount_matrix" and "in_accel_mount_matrix" sysfs attributes. It is declared into mpu6050 DTS entry as a "mount-matrix" property. Old interface is kept for backward userspace compatibility and may be retrieved from legacy platform_data mechanism only. Signed-off-by:
Gregor Boirie <gregor.boirie@parrot.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Gregor Boirie authored
Expose a rotation matrix to indicate userspace the chip orientation with respect to the overall hardware system. Matrix is retrieved from "in_mount_matrix". It is declared into ak8975 DTS entry as a "mount-matrix" property. Signed-off-by:
-
Gregor Boirie authored
Expose a rotation matrix to indicate userspace the chip placement with respect to the overall hardware system. This is needed to adjust coordinates sampled from a sensor chip when its position deviates from the main hardware system. Final coordinates computation is delegated to userspace since: * computation may involve floating point arithmetics ; * it allows an application to combine adjustments with arbitrary transformations. This 3 dimentional space rotation matrix is expressed as 3x3 array of strings to support floating point numbers. It may be retrieved from a "[<dir>_][<type>_]mount_matrix" sysfs attribute file. It is declared into a device / driver specific DTS property or platform data. Signed-off-by:
-
- 19 Apr, 2016 12 commits
-
-
Alison Schofield authored
Driver includes struct regmap and struct device in its global data. Remove the struct device and use regmap API to retrieve device info. Patch created using Coccinelle plus manual edits. Signed-off-by:
Alison Schofield <amsfield22@gmail.com> Reviewed-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
-
Alison Schofield authored
Driver includes struct regmap and struct device in its global data. Remove the struct device and use regmap API to retrieve device info. Patch created using Coccinelle plus manual edits. Signed-off-by:
Irina Tirdea <irina.tirdea@intel.com> Reviewed-by:
-
Peter Meerwald-Stadler authored
ultraviolet (UV) light sensor with I2C interface with a peak sensitivity at 355 nm strangely, chip uses two addresses 0x38 and 0x39 for LSB and MSB data, resp. datasheet: http://www.vishay.com/docs/84277/veml6070.pdfSigned-off-by:
Peter Meerwald-Stadler <pmeerw@pmeerw.net> Signed-off-by:
-
Laxman Dewangan authored
Add following APIs in the list of managed resources of IIO: devm_iio_channel_get() devm_iio_channel_get_all() devm_iio_channel_release() devm_iio_channel_release_all() Signed-off-by:
Laxman Dewangan <ldewangan@nvidia.com> Signed-off-by:
-
Laxman Dewangan authored
Some of kernel driver uses the IIO framework to get the sensor value via ADC or IIO HW driver. The client driver get iio channel by iio_channel_get_all() and release it by calling iio_channel_release_all(). Add resource managed version (devm_*) of these APIs so that if client calls the devm_iio_channel_get_all() then it need not to release it explicitly, it can be done by managed device framework when driver get un-binded. This reduces the code in error path and also need of .remove callback in some cases. Signed-off-by:
-
Laxman Dewangan authored
Some of kernel driver uses the IIO framework to get the sensor value via ADC or IIO HW driver. The client driver get iio channel by iio_channel_get() and release it by calling iio_channel_release(). Add resource managed version (devm_*) of these APIs so that if client calls the devm_iio_channel_get() then it need not to release it explicitly, it can be done by managed device framework when driver get un-binded. This reduces the code in error path and also need of .remove callback in some cases. Signed-off-by:
-
Linus Walleij authored
If no channels are enabled when we run generic_buffer on a device, add a command-line option to just enable all of them, run the sampling and disable them all again afterwards. This is extremely useful when I'm low-level testing my sensors with interrupts and triggers, sample session: root@Ux500:/ lsiio Device 000: lsm303dlh_accel Device 001: lis331dl_accel Device 002: l3g4200d Device 003: lsm303dlh_magn Device 004: lps001wp Trigger 000: lsm303dlh_accel-trigger Trigger 001: lis331dl_accel-trigger Trigger 002: l3g4200d-trigger root@Ux500:/ generic_buffer -a -c 10 -n l3g4200d iio device number being used is 2 iio trigger number being used is 2 No channels are enabled, enabling all channels Enabling: in_anglvel_x_en Enabling: in_anglvel_y_en Enabling: in_anglvel_z_en Enabling: in_timestamp_en /sys/bus/iio/devices/iio:device2 l3g4200d-trigger -3.593664 -0.713133 4.870143 946684863662292480 3.225546 0.867357 -4.945878 946684863671875000 -0.676413 0.127296 0.106641 946684863681488037 -0.661113 0.110160 0.128826 946684863690673828 -0.664173 0.113067 0.123471 946684863700683593 -0.664938 0.109395 0.124848 946684863710144042 -0.664173 0.110619 0.130203 946684863719512939 -0.666162 0.111231 0.132651 946684863729125976 -0.668610 0.111690 0.130662 946684863738739013 -0.660501 0.110466 0.131733 946684863748565673 Disabling: in_anglvel_x_en Disabling: in_anglvel_y_en Disabling: in_anglvel_z_en Disabling: in_timestamp_en Pure awesomeness. If some channels have been enabled through scripts or manual interaction, nothing happens. Cc: Peter Meerwald-Stadler <pmeerw@pmeerw.net> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Linus Walleij authored
Some types of ST Sensors can be connected to the same IRQ line as other peripherals using open drain. Add a device tree binding and a sensor data property to flip the right bit in the interrupt control register to enable open drain mode on the INT line. If the line is set to be open drain, also tag on IRQF_SHARED to the IRQ flags when requesting the interrupt, as the whole point of using open drain interrupt lines is to share them with more than one peripheral (wire-or). Cc: devicetree@vger.kernel.org Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Acked-by:
Rob Herring <rob@kernel.org> Signed-off-by:
-
Linus Walleij authored
This makes all ST sensor drivers check that they actually have new data available for the requested channel(s) before claiming an IRQ, by reading the status register (which is conveniently the same for all ST sensors) and check that the channel has new data before proceeding to read it and fill the buffer. This way sensors can share an interrupt line: it can be flaged as shared and then the sensor that did not fire will return NO_IRQ, and the sensor that fired will handle the IRQ and return IRQ_HANDLED. Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
-
Linus Walleij authored
The current buffer read code tries to optimize reads from the sensor data registers by issuing a single read operation across all the indata registers. This doesn't work: when the LIS331DL accelerometer sensor is configured to open drain, active low interrupt mode, this will just clear the XDA (X-axis data available) bit in the STATUS_REG register (0x27), while YDA, ZDA and even ZYXDA remain set to 1, and the internal logic of the sensor holds the DRDY (INT1) line asserted (the value of the status register is 0xee). If we instead issue one read operation per enabled channel (X, Y, Z) things start working and we can use open drain and active low interrupts. Note that a backported patch fixing this issue will be heading via the fixes branch but changes in this file already in staging-next will make that patch 'look' rather different. The code in here is the correct one when that clash hits. Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Signed-off-by:
-
Stefan Wahren authored
This patch moves the STMP reset out of ADC init function so as to remove the possiblity of an error return which will be necessary for PM ops support patches to follow. Signed-off-by:
-
Stefan Wahren authored
This patch moves the touchscreen type configuration into a more suitable function. Btw this simplifies PM ops later. Signed-off-by:
-
- 18 Apr, 2016 1 commit
-
-
Daniel Baluta authored
Signed-off-by:
-
