- 28 Jul, 2013 20 commits
-
-
Michael S. Tsirkin authored
[ Upstream commit c38e39c3 ] vhost_net_ubuf_put_and_wait has a confusing name: it will actually also free it's argument. Thus since commit 1280c27f "vhost-net: flush outstanding DMAs on memory change" vhost_net_flush tries to use the argument after passing it to vhost_net_ubuf_put_and_wait, this results in use after free. To fix, don't free the argument in vhost_net_ubuf_put_and_wait, add an new API for callers that want to free ubufs. Acked-by:
Asias He <asias@redhat.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
Michael S. Tsirkin <mst@redhat.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Michael S. Tsirkin authored
[ Upstream commit cbdadbbf ] virtio net called virtqueue_enable_cq on RX path after napi_complete, so with NAPI_STATE_SCHED clear - outside the implicit napi lock. This violates the requirement to synchronize virtqueue_enable_cq wrt virtqueue_add_buf. In particular, used event can move backwards, causing us to lose interrupts. In a debug build, this can trigger panic within START_USE. Jason Wang reports that he can trigger the races artificially, by adding udelay() in virtqueue_enable_cb() after virtio_mb(). However, we must call napi_complete to clear NAPI_STATE_SCHED before polling the virtqueue for used buffers, otherwise napi_schedule_prep in a callback will fail, causing us to lose RX events. To fix, call virtqueue_enable_cb_prepare with NAPI_STATE_SCHED set (under napi lock), later call virtqueue_poll with NAPI_STATE_SCHED clear (outside the lock). Reported-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Michael S. Tsirkin authored
[ Upstream commit cc229884 ] This adds a way to check ring empty state after enable_cb outside any locks. Will be used by virtio_net. Note: there's room for more optimization: caller is likely to have a memory barrier already, which means we might be able to get rid of a barrier here. Deferring this optimization until we do some benchmarking. Signed-off-by:
-
Jongsung Kim authored
[ Upstream commit 01276ed2 ] Signed-off-by:
Jongsung Kim <neidhard.kim@lge.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Ben Hutchings authored
[ Upstream commit 734d4e15 ] Commit 2768935a ('sfc: reuse pages to avoid DMA mapping/unmapping costs') did not fully take account of DMA scattering which was introduced immediately before. If a received packet is invalid and must be discarded, we only drop a reference to the first buffer's page, but we need to drop a reference for each buffer the packet used. I think this bug was missed partly because efx_recycle_rx_buffers() was not renamed and so no longer does what its name says. It does not change the state of buffers, but only prepares the underlying pages for recycling. Rename it accordingly. Signed-off-by:
Ben Hutchings <bhutchings@solarflare.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 3630d400 ] After the removal of rt->n we do not create a neighbour entry at route insertion time (rt6_bind_neighbour is gone). As long as no neighbour is created because of "useful traffic" we skip this routing entry because rt6_check_neigh cannot pick up a valid neighbour (neigh == NULL) and thus returns false. This change was introduced by commit 887c95cc ("ipv6: Complete neighbour entry removal from dst_entry.") To quote RFC4191: "If the host has no information about the router's reachability, then the host assumes the router is reachable." and also: "A host MUST NOT probe a router's reachability in the absence of useful traffic that the host would have sent to the router if it were reachable." So, just assume the router is reachable and let's rt6_probe do the rest. We don't need to create a neighbour on route insertion time. If we don't compile with CONFIG_IPV6_ROUTER_PREF (RFC4191 support) a neighbour is only valid if its nud_state is NUD_VALID. I did not find any references that we should probe the router on route insertion time via the other RFCs. So skip this route in that case. v2: a) use IS_ENABLED instead of #ifdefs (thanks to Sergei Shtylyov) Reported-by:
Pierre Emeriaud <petrus.lt@gmail.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 75a493e6 ] If the socket had an IPV6_MTU value set, ip6_append_data_mtu lost track of this when appending the second frame on a corked socket. This results in the following splat: [37598.993962] ------------[ cut here ]------------ [37598.994008] kernel BUG at net/core/skbuff.c:2064! [37598.994008] invalid opcode: 0000 [#1] SMP [37598.994008] Modules linked in: tcp_lp uvcvideo videobuf2_vmalloc videobuf2_memops videobuf2_core videodev media vfat fat usb_storage fuse ebtable_nat xt_CHECKSUM bridge stp llc ipt_MASQUERADE nf_conntrack_netbios_ns nf_conntrack_broadcast ip6table_mangle ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 iptable_nat +nf_nat_ipv4 nf_nat iptable_mangle nf_conntrack_ipv4 nf_defrag_ipv4 xt_conntrack nf_conntrack ebtable_filter ebtables ip6table_filter ip6_tables be2iscsi iscsi_boot_sysfs bnx2i cnic uio cxgb4i cxgb4 cxgb3i cxgb3 mdio libcxgbi ib_iser rdma_cm ib_addr iw_cm ib_cm ib_sa ib_mad ib_core iscsi_tcp libiscsi_tcp libiscsi +scsi_transport_iscsi rfcomm bnep iTCO_wdt iTCO_vendor_support snd_hda_codec_conexant arc4 iwldvm mac80211 snd_hda_intel acpi_cpufreq mperf coretemp snd_hda_codec microcode cdc_wdm cdc_acm [37598.994008] snd_hwdep cdc_ether snd_seq snd_seq_device usbnet mii joydev btusb snd_pcm bluetooth i2c_i801 e1000e lpc_ich mfd_core ptp iwlwifi pps_core snd_page_alloc mei cfg80211 snd_timer thinkpad_acpi snd tpm_tis soundcore rfkill tpm tpm_bios vhost_net tun macvtap macvlan kvm_intel kvm uinput binfmt_misc +dm_crypt i915 i2c_algo_bit drm_kms_helper drm i2c_core wmi video [37598.994008] CPU 0 [37598.994008] Pid: 27320, comm: t2 Not tainted 3.9.6-200.fc18.x86_64 #1 LENOVO 27744PG/27744PG [37598.994008] RIP: 0010:[<ffffffff815443a5>] [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP: 0018:ffff88003670da18 EFLAGS: 00010202 [37598.994008] RAX: ffff88018105c018 RBX: 0000000000000004 RCX: 00000000000006c0 [37598.994008] RDX: ffff88018105a6c0 RSI: ffff88018105a000 RDI: ffff8801e1b0aa00 [37598.994008] RBP: ffff88003670da78 R08: 0000000000000000 R09: ffff88018105c040 [37598.994008] R10: ffff8801e1b0aa00 R11: 0000000000000000 R12: 000000000000fff8 [37598.994008] R13: 00000000000004fc R14: 00000000ffff0504 R15: 0000000000000000 [37598.994008] FS: 00007f28eea59740(0000) GS:ffff88023bc00000(0000) knlGS:0000000000000000 [37598.994008] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b [37598.994008] CR2: 0000003d935789e0 CR3: 00000000365cb000 CR4: 00000000000407f0 [37598.994008] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [37598.994008] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [37598.994008] Process t2 (pid: 27320, threadinfo ffff88003670c000, task ffff88022c162ee0) [37598.994008] Stack: [37598.994008] ffff88022e098a00 ffff88020f973fc0 0000000000000008 00000000000004c8 [37598.994008] ffff88020f973fc0 00000000000004c4 ffff88003670da78 ffff8801e1b0a200 [37598.994008] 0000000000000018 00000000000004c8 ffff88020f973fc0 00000000000004c4 [37598.994008] Call Trace: [37598.994008] [<ffffffff815fc21f>] ip6_append_data+0xccf/0xfe0 [37598.994008] [<ffffffff8158d9f0>] ? ip_copy_metadata+0x1a0/0x1a0 [37598.994008] [<ffffffff81661f66>] ? _raw_spin_lock_bh+0x16/0x40 [37598.994008] [<ffffffff8161548d>] udpv6_sendmsg+0x1ed/0xc10 [37598.994008] [<ffffffff812a2845>] ? sock_has_perm+0x75/0x90 [37598.994008] [<ffffffff815c3693>] inet_sendmsg+0x63/0xb0 [37598.994008] [<ffffffff812a2973>] ? selinux_socket_sendmsg+0x23/0x30 [37598.994008] [<ffffffff8153a450>] sock_sendmsg+0xb0/0xe0 [37598.994008] [<ffffffff810135d1>] ? __switch_to+0x181/0x4a0 [37598.994008] [<ffffffff8153d97d>] sys_sendto+0x12d/0x180 [37598.994008] [<ffffffff810dfb64>] ? __audit_syscall_entry+0x94/0xf0 [37598.994008] [<ffffffff81020ed1>] ? syscall_trace_enter+0x231/0x240 [37598.994008] [<ffffffff8166a7e7>] tracesys+0xdd/0xe2 [37598.994008] Code: fe 07 00 00 48 c7 c7 04 28 a6 81 89 45 a0 4c 89 4d b8 44 89 5d a8 e8 1b ac b1 ff 44 8b 5d a8 4c 8b 4d b8 8b 45 a0 e9 cf fe ff ff <0f> 0b 66 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 48 [37598.994008] RIP [<ffffffff815443a5>] skb_copy_and_csum_bits+0x325/0x330 [37598.994008] RSP <ffff88003670da18> [37599.007323] ---[ end trace d69f6a17f8ac8eee ]--- While there, also check if path mtu discovery is activated for this socket. The logic was adapted from ip6_append_data when first writing on the corked socket. This bug was introduced with commit 0c183379 ("ipv6: fix incorrect ipsec fragment"). v2: a) Replace IPV6_PMTU_DISC_DO with IPV6_PMTUDISC_PROBE. b) Don't pass ipv6_pinfo to ip6_append_data_mtu (suggestion by Gao feng, thanks!). c) Change mtu to unsigned int, else we get a warning about non-matching types because of the min()-macro type-check. Acked-by:
Gao feng <gaofeng@cn.fujitsu.com> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 8822b64a ] We accidentally call down to ip6_push_pending_frames when uncorking pending AF_INET data on a ipv6 socket. This results in the following splat (from Dave Jones): skbuff: skb_under_panic: text:ffffffff816765f6 len:48 put:40 head:ffff88013deb6df0 data:ffff88013deb6dec tail:0x2c end:0xc0 dev:<NULL> ------------[ cut here ]------------ kernel BUG at net/core/skbuff.c:126! invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC Modules linked in: dccp_ipv4 dccp 8021q garp bridge stp dlci mpoa snd_seq_dummy sctp fuse hidp tun bnep nfnetlink scsi_transport_iscsi rfcomm can_raw can_bcm af_802154 appletalk caif_socket can caif ipt_ULOG x25 rose af_key pppoe pppox ipx phonet irda llc2 ppp_generic slhc p8023 psnap p8022 llc crc_ccitt atm bluetooth +netrom ax25 nfc rfkill rds af_rxrpc coretemp hwmon kvm_intel kvm crc32c_intel snd_hda_codec_realtek ghash_clmulni_intel microcode pcspkr snd_hda_codec_hdmi snd_hda_intel snd_hda_codec snd_hwdep usb_debug snd_seq snd_seq_device snd_pcm e1000e snd_page_alloc snd_timer ptp snd pps_core soundcore xfs libcrc32c CPU: 2 PID: 8095 Comm: trinity-child2 Not tainted 3.10.0-rc7+ #37 task: ffff8801f52c2520 ti: ffff8801e6430000 task.ti: ffff8801e6430000 RIP: 0010:[<ffffffff816e759c>] [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP: 0018:ffff8801e6431de8 EFLAGS: 00010282 RAX: 0000000000000086 RBX: ffff8802353d3cc0 RCX: 0000000000000006 RDX: 0000000000003b90 RSI: ffff8801f52c2ca0 RDI: ffff8801f52c2520 RBP: ffff8801e6431e08 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022ea0c800 R13: ffff88022ea0cdf8 R14: ffff8802353ecb40 R15: ffffffff81cc7800 FS: 00007f5720a10740(0000) GS:ffff880244c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000005862000 CR3: 000000022843c000 CR4: 00000000001407e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600 Stack: ffff88013deb6dec 000000000000002c 00000000000000c0 ffffffff81a3f6e4 ffff8801e6431e18 ffffffff8159a9aa ffff8801e6431e90 ffffffff816765f6 ffffffff810b756b 0000000700000002 ffff8801e6431e40 0000fea9292aa8c0 Call Trace: [<ffffffff8159a9aa>] skb_push+0x3a/0x40 [<ffffffff816765f6>] ip6_push_pending_frames+0x1f6/0x4d0 [<ffffffff810b756b>] ? mark_held_locks+0xbb/0x140 [<ffffffff81694919>] udp_v6_push_pending_frames+0x2b9/0x3d0 [<ffffffff81694660>] ? udplite_getfrag+0x20/0x20 [<ffffffff8162092a>] udp_lib_setsockopt+0x1aa/0x1f0 [<ffffffff811cc5e7>] ? fget_light+0x387/0x4f0 [<ffffffff816958a4>] udpv6_setsockopt+0x34/0x40 [<ffffffff815949f4>] sock_common_setsockopt+0x14/0x20 [<ffffffff81593c31>] SyS_setsockopt+0x71/0xd0 [<ffffffff816f5d54>] tracesys+0xdd/0xe2 Code: 00 00 48 89 44 24 10 8b 87 d8 00 00 00 48 89 44 24 08 48 8b 87 e8 00 00 00 48 c7 c7 c0 04 aa 81 48 89 04 24 31 c0 e8 e1 7e ff ff <0f> 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 48 89 e5 0f 0b 55 RIP [<ffffffff816e759c>] skb_panic+0x63/0x65 RSP <ffff8801e6431de8> This patch adds a check if the pending data is of address family AF_INET and directly calls udp_push_ending_frames from udp_v6_push_pending_frames if that is the case. This bug was found by Dave Jones with trinity. (Also move the initialization of fl6 below the AF_INET check, even if not strictly necessary.) Signed-off-by:
-
Cong Wang authored
[ Upstream commit 3b7b514f ] This is a regression introduced by commit fd58156e (IPIP: Use ip-tunneling code.) Similar to GRE tunnel, previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. Also, the check for i_key, o_key etc. is suspicious too, which did not exist before, reset them before passing to ip_tunnel_ioctl(). Signed-off-by:
Cong Wang <amwang@redhat.com> Cc: Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Wei Yongjun authored
[ Upstream commit e1558a93 ] Add missing .owner of struct pppox_proto. This prevents the module from being removed from underneath its users. Signed-off-by:
Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by:
-
Pravin B Shelar authored
[ Upstream commit 23a3647b ] In path mtu check, ip header total length works for gre device but not for gre-tap device. Use skb len which is consistent for all tunneling types. This is old bug in gre. This also fixes mtu calculation bug introduced by commit c5441932 (GRE: Refactor GRE tunneling code). Reported-by:
Timo Teras <timo.teras@iki.fi> Signed-off-by:
Pravin B Shelar <pshelar@nicira.com> Signed-off-by:
-
Amerigo Wang authored
[ Upstream commit 8965779d, with some bits from commit b7b1bfce ("ipv6: split duplicate address detection and router solicitation timer") to get the __ipv6_get_lladdr() used by this patch. ] dingtianhong reported the following deadlock detected by lockdep: ====================================================== [ INFO: possible circular locking dependency detected ] 3.4.24.05-0.1-default #1 Not tainted ------------------------------------------------------- ksoftirqd/0/3 is trying to acquire lock: (&ndev->lock){+.+...}, at: [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 but task is already holding lock: (&mc->mca_lock){+.+...}, at: [<ffffffff8149d130>] mld_send_report+0x40/0x150 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #1 (&mc->mca_lock){+.+...}: [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f691a>] rt_spin_lock+0x4a/0x60 [<ffffffff8149e4bb>] igmp6_group_added+0x3b/0x120 [<ffffffff8149e5d8>] ipv6_mc_up+0x38/0x60 [<ffffffff81480a4d>] ipv6_find_idev+0x3d/0x80 [<ffffffff81483175>] addrconf_notify+0x3d5/0x4b0 [<ffffffff814fae3f>] notifier_call_chain+0x3f/0x80 [<ffffffff81073471>] raw_notifier_call_chain+0x11/0x20 [<ffffffff813d8722>] call_netdevice_notifiers+0x32/0x60 [<ffffffff813d92d4>] __dev_notify_flags+0x34/0x80 [<ffffffff813d9360>] dev_change_flags+0x40/0x70 [<ffffffff813ea627>] do_setlink+0x237/0x8a0 [<ffffffff813ebb6c>] rtnl_newlink+0x3ec/0x600 [<ffffffff813eb4d0>] rtnetlink_rcv_msg+0x160/0x310 [<ffffffff814040b9>] netlink_rcv_skb+0x89/0xb0 [<ffffffff813eb357>] rtnetlink_rcv+0x27/0x40 [<ffffffff81403e20>] netlink_unicast+0x140/0x180 [<ffffffff81404a9e>] netlink_sendmsg+0x33e/0x380 [<ffffffff813c4252>] sock_sendmsg+0x112/0x130 [<ffffffff813c537e>] __sys_sendmsg+0x44e/0x460 [<ffffffff813c5544>] sys_sendmsg+0x44/0x70 [<ffffffff814feab9>] system_call_fastpath+0x16/0x1b -> #0 (&ndev->lock){+.+...}: [<ffffffff810a798e>] check_prev_add+0x3de/0x440 [<ffffffff810a8027>] validate_chain+0x637/0x730 [<ffffffff810a8417>] __lock_acquire+0x2f7/0x500 [<ffffffff810a8734>] lock_acquire+0x114/0x150 [<ffffffff814f6c82>] rt_read_lock+0x42/0x60 [<ffffffff8147f804>] ipv6_get_lladdr+0x74/0x120 [<ffffffff8149b036>] mld_newpack+0xb6/0x160 [<ffffffff8149b18b>] add_grhead+0xab/0xc0 [<ffffffff8149d03b>] add_grec+0x3ab/0x460 [<ffffffff8149d14a>] mld_send_report+0x5a/0x150 [<ffffffff8149f99e>] igmp6_timer_handler+0x4e/0xb0 [<ffffffff8105705a>] call_timer_fn+0xca/0x1d0 [<ffffffff81057b9f>] run_timer_softirq+0x1df/0x2e0 [<ffffffff8104e8c7>] handle_pending_softirqs+0xf7/0x1f0 [<ffffffff8104ea3b>] __do_softirq_common+0x7b/0xf0 [<ffffffff8104f07f>] __thread_do_softirq+0x1af/0x210 [<ffffffff8104f1c1>] run_ksoftirqd+0xe1/0x1f0 [<ffffffff8106c7de>] kthread+0xae/0xc0 [<ffffffff814fff74>] kernel_thread_helper+0x4/0x10 actually we can just hold idev->lock before taking pmc->mca_lock, and avoid taking idev->lock again when iterating idev->addr_list, since the upper callers of mld_newpack() already take read_lock_bh(&idev->lock). Reported-by:
dingtianhong <dingtianhong@huawei.com> Cc: dingtianhong <dingtianhong@huawei.com> Cc: Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org> Cc: David S. Miller <davem@davemloft.net> Cc: Hannes Frederic Sowa <hannes@stressinduktion.org> Tested-by:
Chen Weilong <chenweilong@huawei.com> Signed-off-by:
-
Cong Wang authored
[ Upstream commit ab6c7a0a ] vti module allocates dev->tstats twice: in vti_fb_tunnel_init() and in vti_tunnel_init(), this lead to a memory leak of dev->tstats. Just remove the duplicated operations in vti_fb_tunnel_init(). (candidate for -stable) Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Cong Wang authored
[ Upstream commit 6c734fb8 ] When testing GRE tunnel, I got: # ip tunnel show get tunnel gre0 failed: Invalid argument get tunnel gre1 failed: Invalid argument This is a regression introduced by commit c5441932 ("GRE: Refactor GRE tunneling code.") because previously we only check the parameters for SIOCADDTUNNEL and SIOCCHGTUNNEL, after that commit, the check is moved for all commands. So, just check for SIOCADDTUNNEL and SIOCCHGTUNNEL. After this patch I got: # ip tunnel show gre0: gre/ip remote any local any ttl inherit nopmtudisc gre1: gre/ip remote 192.168.122.101 local 192.168.122.45 ttl inherit Signed-off-by:
-
Changli Gao authored
[ Upstream commit b1a5a34b ] Ver and type in pppoe_hdr should be swapped as defined by RFC2516 section-4. Signed-off-by:
-
Dave Jones authored
[ Upstream commit 4ccb93ce ] Two of the x25 ioctl cases have error paths that break out of the function without unlocking the socket, leading to this warning: ================================================ [ BUG: lock held when returning to user space! ] 3.10.0-rc7+ #36 Not tainted ------------------------------------------------ trinity-child2/31407 is leaving the kernel with locks still held! 1 lock held by trinity-child2/31407: #0: (sk_lock-AF_X25){+.+.+.}, at: [<ffffffffa024b6da>] x25_ioctl+0x8a/0x740 [x25] Signed-off-by:
Dave Jones <davej@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit c9ab4d85 ] There is a race in neighbour code, because neigh_destroy() uses skb_queue_purge(&neigh->arp_queue) without holding neighbour lock, while other parts of the code assume neighbour rwlock is what protects arp_queue Convert all skb_queue_purge() calls to the __skb_queue_purge() variant Use __skb_queue_head_init() instead of skb_queue_head_init() to make clear we do not use arp_queue.lock And hold neigh->lock in neigh_destroy() to close the race. Reported-by:
Joe Jin <joe.jin@oracle.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Hannes Frederic Sowa authored
[ Upstream commit 5c29fb12 ] Because of commit 218774dc ("ipv6: add anti-spoofing checks for 6to4 and 6rd") the sit driver dropped packets for 2002::/16 destinations and sources even when configured to work as a tunnel with fixed endpoint. We may only apply the 6rd/6to4 anti-spoofing checks if the device is not in pointopoint mode. This was an oversight from me in the above commit, sorry. Thanks to Roman Mamedov for reporting this! Reported-by:
Roman Mamedov <rm@romanrm.ru> Cc: David Miller <davem@davemloft.net> Cc: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by:
-
Olivier DANET authored
upstream commit 961246b4. Commit e4c6bfd2 ("mm: rearrange vm_area_struct for fewer cache misses") changed the layout of the vm_area_struct structure, it broke several SPARC32 assembly routines which used numerical constants for accessing the vm_mm field. This patch defines the VMA_VM_MM constant to replace the immediate values. Signed-off-by:
Olivier DANET <odanet@caramail.com> Signed-off-by:
-
Jan Kara authored
commit a5faeaf9 upstream. Code in blkdev.c moves a device inode to default_backing_dev_info when the last reference to the device is put and moves the device inode back to its bdi when the first reference is acquired. This includes moving to wb.b_dirty list if the device inode is dirty. The code however doesn't setup timer to wake corresponding flusher thread and while wb.b_dirty list is non-empty __mark_inode_dirty() will not set it up either. Thus periodic writeback is effectively disabled until a sync(2) call which can lead to unexpected data loss in case of crash or power failure. Fix the problem by setting up a timer for periodic writeback in case we add the first dirty inode to wb.b_dirty list in bdev_inode_switch_bdi(). Reported-by:
Bert De Jonghe <Bert.DeJonghe@amplidata.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
- 25 Jul, 2013 20 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt (Red Hat) authored
commit 8e2e2fa4 upstream. Commit a695cb58 "tracing: Prevent deleting instances when they are being read" tried to fix a race between deleting a trace instance and reading contents of a trace file. But it wasn't good enough. The following could crash the kernel: # cd /sys/kernel/debug/tracing/instances # ( while :; do mkdir foo; rmdir foo; done ) & # ( while :; do echo 1 > foo/events/sched/sched_switch 2> /dev/null; done ) & Luckily this can only be done by root user, but it should be fixed regardless. The problem is that a delete of the file can happen after the write to the event is opened, but before the enabling happens. The solution is to make sure the trace_array is available before succeeding in opening for write, and incerment the ref counter while opened. Now the instance can be deleted when the events are writing to the buffer, but the deletion of the instance will disable all events before the instance is actually deleted. Reported-by:
Alexander Lam <azl@google.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 2a6c24af upstream. While analyzing the code, I discovered that there's a potential race between deleting a trace instance and setting events. There are a few races that can occur if events are being traced as the buffer is being deleted. Mostly the problem comes with freeing the descriptor used by the trace event callback. To prevent problems like this, the events are disabled before the buffer is deleted. The problem with the current solution is that the event_mutex is let go between disabling the events and freeing the files, which means that the events could be enabled again while the freeing takes place. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 7b85af63 upstream. When a trace file is opened that may access a trace array, it must increment its ref count to prevent it from being deleted. Reported-by:
-
Steven Rostedt (Red Hat) authored
commit ff451961 upstream. Commit a695cb58 "tracing: Prevent deleting instances when they are being read" tried to fix a race between deleting a trace instance and reading contents of a trace file. But it wasn't good enough. The following could crash the kernel: # cd /sys/kernel/debug/tracing/instances # ( while :; do mkdir foo; rmdir foo; done ) & # ( while :; do cat foo/trace &> /dev/null; done ) & Luckily this can only be done by root user, but it should be fixed regardless. The problem is that a delete of the file can happen after the reader starts to open the file but before it grabs the trace_types_mutex. The solution is to validate the trace array before using it. If the trace array does not exist in the list of trace arrays, then it returns -ENODEV. There's a possibility that a trace_array could be deleted and a new one created and the open would open its file instead. But that is very minor as it will just return the data of the new trace array, it may confuse the user but it will not crash the system. As this can only be done by root anyway, the race will only occur if root is deleting what its trying to read at the same time. Reported-by:
-
Alexander Z Lam authored
commit a8227415 upstream. There are multiple places where the ftrace_trace_arrays list is accessed in trace_events.c without the trace_types_lock held. Link: http://lkml.kernel.org/r/1372732674-22726-1-git-send-email-azl@google.comSigned-off-by:
-
Alexander Z Lam authored
commit 2d71619c upstream. The trace_marker file was present for each new instance created, but it added the trace mark to the global trace buffer instead of to the instance's buffer. Link: http://lkml.kernel.org/r/1372717885-4543-2-git-send-email-azl@google.comSigned-off-by:
-
zhangwei(Jovi) authored
commit 11034ae9 upstream. All syscall tracing irqs-off tags are wrong, the syscall enter entry doesn't disable irqs. [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 13/13 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-513 [000] d... 56115.496766: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-513 [000] d... 56115.497008: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) sendmail-771 [000] d... 56115.827982: sys_open(filename: b770e6d1, flags: 0, mode: 1b6) The reason is syscall tracing doesn't record irq_flags into buffer. The proper display is: [root@jovi tracing]#echo "syscalls:sys_enter_open" > set_event [root@jovi tracing]# cat trace # tracer: nop # # entries-in-buffer/entries-written: 14/14 #P:2 # # _-----=> irqs-off # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / delay # TASK-PID CPU# |||| TIMESTAMP FUNCTION # | | | |||| | | irqbalance-514 [001] .... 46.213921: sys_open(filename: 804e1a6, flags: 0, mode: 1b6) irqbalance-514 [001] .... 46.214160: sys_open(filename: 804e1bb, flags: 0, mode: 1b6) <...>-920 [001] .... 47.307260: sys_open(filename: 4e82a0c5, flags: 80000, mode: 0) Link: http://lkml.kernel.org/r/1365564393-10972-3-git-send-email-jovi.zhangwei@huawei.comSigned-off-by:
zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by:
-
Steven Rostedt authored
commit 6e94a780 upstream. Running the following: # cd /sys/kernel/debug/tracing # echo p:i do_sys_open > kprobe_events # echo p:j schedule >> kprobe_events # cat kprobe_events p:kprobes/i do_sys_open p:kprobes/j schedule # echo p:i do_sys_open >> kprobe_events # cat kprobe_events p:kprobes/j schedule p:kprobes/i do_sys_open # ls /sys/kernel/debug/tracing/events/kprobes/ enable filter j Notice that the 'i' is missing from the kprobes directory. The console produces: "Failed to create system directory kprobes" This is because kprobes passes in a allocated name for the system and the ftrace event subsystem saves off that name instead of creating a duplicate for it. But the kprobes may free the system name making the pointer to it invalid. This bug was introduced by 92edca07 "tracing: Use direct field, type and system names" which switched from using kstrdup() on the system name in favor of just keeping apointer to it, as the internal ftrace event system names are static and exist for the life of the computer being booted. Instead of reverting back to duplicating system names again, we can use core_kernel_data() to determine if the passed in name was allocated or static. Then use the MSB of the ref_count to be a flag to keep track if the name was allocated or not. Then we can still save from having to duplicate strings that will always exist, but still copy the ones that may be freed. Reported-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Tested-by:
-
Peter Zijlstra authored
commit 058ebd0e upstream. Jiri managed to trigger this warning: [] ====================================================== [] [ INFO: possible circular locking dependency detected ] [] 3.10.0+ #228 Tainted: G W [] ------------------------------------------------------- [] p/6613 is trying to acquire lock: [] (rcu_node_0){..-...}, at: [<ffffffff810ca797>] rcu_read_unlock_special+0xa7/0x250 [] [] but task is already holding lock: [] (&ctx->lock){-.-...}, at: [<ffffffff810f2879>] perf_lock_task_context+0xd9/0x2c0 [] [] which lock already depends on the new lock. [] [] the existing dependency chain (in reverse order) is: [] [] -> #4 (&ctx->lock){-.-...}: [] -> #3 (&rq->lock){-.-.-.}: [] -> #2 (&p->pi_lock){-.-.-.}: [] -> #1 (&rnp->nocb_gp_wq[1]){......}: [] -> #0 (rcu_node_0){..-...}: Paul was quick to explain that due to preemptible RCU we cannot call rcu_read_unlock() while holding scheduler (or nested) locks when part of the read side critical section was preemptible. Therefore solve it by making the entire RCU read side non-preemptible. Also pull out the retry from under the non-preempt to play nice with RT. Reported-by:
Jiri Olsa <jolsa@redhat.com> Helped-out-by:
Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Jiri Olsa authored
commit 06f41796 upstream. The '!ctx->is_active' check has a valid scenario, so there's no need for the warning. The reason is that there's a time window between the 'ctx->is_active' check in the perf_event_enable() function and the __perf_event_enable() function having: - IRQs on - ctx->lock unlocked where the task could be killed and 'ctx' deactivated by perf_event_exit_task(), ending up with the warning below. So remove the WARN_ON_ONCE() check and add comments to explain it all. This addresses the following warning reported by Vince Weaver: [ 324.983534] ------------[ cut here ]------------ [ 324.984420] WARNING: at kernel/events/core.c:1953 __perf_event_enable+0x187/0x190() [ 324.984420] Modules linked in: [ 324.984420] CPU: 19 PID: 2715 Comm: nmi_bug_snb Not tainted 3.10.0+ #246 [ 324.984420] Hardware name: Supermicro X8DTN/X8DTN, BIOS 4.6.3 01/08/2010 [ 324.984420] 0000000000000009 ffff88043fce3ec8 ffffffff8160ea0b ffff88043fce3f00 [ 324.984420] ffffffff81080ff0 ffff8802314fdc00 ffff880231a8f800 ffff88043fcf7860 [ 324.984420] 0000000000000286 ffff880231a8f800 ffff88043fce3f10 ffffffff8108103a [ 324.984420] Call Trace: [ 324.984420] <IRQ> [<ffffffff8160ea0b>] dump_stack+0x19/0x1b [ 324.984420] [<ffffffff81080ff0>] warn_slowpath_common+0x70/0xa0 [ 324.984420] [<ffffffff8108103a>] warn_slowpath_null+0x1a/0x20 [ 324.984420] [<ffffffff81134437>] __perf_event_enable+0x187/0x190 [ 324.984420] [<ffffffff81130030>] remote_function+0x40/0x50 [ 324.984420] [<ffffffff810e51de>] generic_smp_call_function_single_interrupt+0xbe/0x130 [ 324.984420] [<ffffffff81066a47>] smp_call_function_single_interrupt+0x27/0x40 [ 324.984420] [<ffffffff8161fd2f>] call_function_single_interrupt+0x6f/0x80 [ 324.984420] <EOI> [<ffffffff816161a1>] ? _raw_spin_unlock_irqrestore+0x41/0x70 [ 324.984420] [<ffffffff8113799d>] perf_event_exit_task+0x14d/0x210 [ 324.984420] [<ffffffff810acd04>] ? switch_task_namespaces+0x24/0x60 [ 324.984420] [<ffffffff81086946>] do_exit+0x2b6/0xa40 [ 324.984420] [<ffffffff8161615c>] ? _raw_spin_unlock_irq+0x2c/0x30 [ 324.984420] [<ffffffff81087279>] do_group_exit+0x49/0xc0 [ 324.984420] [<ffffffff81096854>] get_signal_to_deliver+0x254/0x620 [ 324.984420] [<ffffffff81043057>] do_signal+0x57/0x5a0 [ 324.984420] [<ffffffff8161a164>] ? __do_page_fault+0x2a4/0x4e0 [ 324.984420] [<ffffffff8161665c>] ? retint_restore_args+0xe/0xe [ 324.984420] [<ffffffff816166cd>] ? retint_signal+0x11/0x84 [ 324.984420] [<ffffffff81043605>] do_notify_resume+0x65/0x80 [ 324.984420] [<ffffffff81616702>] retint_signal+0x46/0x84 [ 324.984420] ---[ end trace 442ec2f04db3771a ]--- Reported-by:
Vince Weaver <vincent.weaver@maine.edu> Signed-off-by:
Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jiri Olsa authored
commit 734df5ab upstream. Currently when the child context for inherited events is created, it's based on the pmu object of the first event of the parent context. This is wrong for the following scenario: - HW context having HW and SW event - HW event got removed (closed) - SW event stays in HW context as the only event and its pmu is used to clone the child context The issue starts when the cpu context object is touched based on the pmu context object (__get_cpu_context). In this case the HW context will work with SW cpu context ending up with following WARN below. Fixing this by using parent context pmu object to clone from child context. Addresses the following warning reported by Vince Weaver: [ 2716.472065] ------------[ cut here ]------------ [ 2716.476035] WARNING: at kernel/events/core.c:2122 task_ctx_sched_out+0x3c/0x) [ 2716.476035] Modules linked in: nfsd auth_rpcgss oid_registry nfs_acl nfs locn [ 2716.476035] CPU: 0 PID: 3164 Comm: perf_fuzzer Not tainted 3.10.0-rc4 #2 [ 2716.476035] Hardware name: AOpen DE7000/nMCP7ALPx-DE R1.06 Oct.19.2012, BI2 [ 2716.476035] 0000000000000000 ffffffff8102e215 0000000000000000 ffff88011fc18 [ 2716.476035] ffff8801175557f0 0000000000000000 ffff880119fda88c ffffffff810ad [ 2716.476035] ffff880119fda880 ffffffff810af02a 0000000000000009 ffff880117550 [ 2716.476035] Call Trace: [ 2716.476035] [<ffffffff8102e215>] ? warn_slowpath_common+0x5b/0x70 [ 2716.476035] [<ffffffff810ab2bd>] ? task_ctx_sched_out+0x3c/0x5f [ 2716.476035] [<ffffffff810af02a>] ? perf_event_exit_task+0xbf/0x194 [ 2716.476035] [<ffffffff81032a37>] ? do_exit+0x3e7/0x90c [ 2716.476035] [<ffffffff810cd5ab>] ? __do_fault+0x359/0x394 [ 2716.476035] [<ffffffff81032fe6>] ? do_group_exit+0x66/0x98 [ 2716.476035] [<ffffffff8103dbcd>] ? get_signal_to_deliver+0x479/0x4ad [ 2716.476035] [<ffffffff810ac05c>] ? __perf_event_task_sched_out+0x230/0x2d1 [ 2716.476035] [<ffffffff8100205d>] ? do_signal+0x3c/0x432 [ 2716.476035] [<ffffffff810abbf9>] ? ctx_sched_in+0x43/0x141 [ 2716.476035] [<ffffffff810ac2ca>] ? perf_event_context_sched_in+0x7a/0x90 [ 2716.476035] [<ffffffff810ac311>] ? __perf_event_task_sched_in+0x31/0x118 [ 2716.476035] [<ffffffff81050dd9>] ? mmdrop+0xd/0x1c [ 2716.476035] [<ffffffff81051a39>] ? finish_task_switch+0x7d/0xa6 [ 2716.476035] [<ffffffff81002473>] ? do_notify_resume+0x20/0x5d [ 2716.476035] [<ffffffff813654f5>] ? retint_signal+0x3d/0x78 [ 2716.476035] ---[ end trace 827178d8a5966c3d ]--- Reported-by:
-
Takashi Iwai authored
commit 86f0b5b8 upstream. snd_pcm_stop() must be called in the PCM substream lock context. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
David Daney authored
commit d949b4fe upstream. Commit abe77f90 (MIPS: Octeon: Add kexec and kdump support) added a bootmem region for the kernel image itself. The problem is that this is rounded up to a 0x100000 boundary, which is memory that may not be owned by the kernel. Depending on the kernel's configuration based size, this 'extra' memory may contain data passed from the bootloader to the kernel itself, which if clobbered makes the kernel crash in various ways. The fix: Quit rounding the size up, so that we only use memory assigned to the kernel. Signed-off-by:
David Daney <david.daney@cavium.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/5449/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Arnd Bergmann authored
commit e8d39240 upstream. The function stub for cpufreq_cooling_get_level introduced in 57df8106 "Thermal: exynos: fix cooling state translation" is not syntactically correct C and needs to be fixed to avoid this error: In file included from drivers/thermal/db8500_thermal.c:20:0: include/linux/cpu_cooling.h: In function 'cpufreq_cooling_get_level': include/linux/cpu_cooling.h:57:1: error: parameter name omitted unsigned long cpufreq_cooling_get_level(unsigned int, unsigned int) ^ include/linux/cpu_cooling.h:57:1: error: parameter name omitted Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Eduardo Valentin <eduardo.valentin@ti.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Amit Daniel kachhap <amit.daniel@samsung.com> Signed-off-by:
-
Max Filippov authored
commit c5a771d0 upstream. The virtual address of boot parameters chain is passed to the kernel via a2 register. Adjust it in case it is remapped during MMUv3 -> MMUv2 mapping change, i.e. when it is in the first 128M. Also fix interpretation of initrd and FDT addresses passed in the boot parameters: these are physical addresses. Reported-by:
Baruch Siach <baruch@tkos.co.il> Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
Chris Zankel <chris@zankel.net> Signed-off-by:
-
Alex Williamson authored
commit 60d0ca3c upstream. If we use a large mapping, the expectation is that only unmaps from the first pte in the superpage are supported. Unmaps from offsets into the superpage should fail (ie. return zero sized unmap). In the current code, unmapping from an offset clears the size of the full mapping starting from an offset. For instance, if we map a 16k physically contiguous range at IOVA 0x0 with a large page, then attempt to unmap 4k at offset 12k, 4 ptes are cleared (12k - 28k) and the unmap returns 16k unmapped. This potentially incorrectly clears valid mappings and confuses drivers like VFIO that use the unmap size to release pinned pages. Fix by refusing to unmap from offsets into the page. Signed-off-by:
Alex Williamson <alex.williamson@redhat.com> Signed-off-by:
Joerg Roedel <joro@8bytes.org> Signed-off-by:
-
Emil Velikov authored
commit 378f2bcd upstream. The commit commit 476e84e1 Author: Ben Skeggs <bskeggs@redhat.com> Date: Mon Feb 11 09:24:23 2013 +1000 drm/nv50-/disp: initial supervisor support for off-chip encoders changed the write mask in one of the interrupt functions for on-chip encoders, causing a regression in certain VGA dual-head setups. This commit reintroduces the mask thus resolving the regression Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=66129Reported-and-Tested-by:
Yves-Alexis <corsac@debian.org> CC: Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Ilia Mirkin authored
commit bf03d1b2 upstream. This is the nva3 counterpart to commit beba44b1 (drm/nv84/disp: Fix HDMI audio regression). The regression happened as a result of refactoring in commit 8e9e3d2d (drm/nv84/disp: move hdmi control into core). Reported-and-tested-by:
Max Baldwin <archerseven@gmail.com> Signed-off-by:
Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by:
-
Alex Deucher authored
commit 80101790 upstream. Mac laptops with multiple GPUs apparently use the gmux driver for backlight control. Don't register a radeon backlight interface. We may need to add other pci ids for other hybrid mac laptops. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=65377Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
