- 09 May, 2024 11 commits
-
-
Yonglong Liu authored
According to hardware limitation, for device support modify VLAN filter state but not support bypass port VLAN filter, it should always disable the port VLAN filter. but the driver enables port VLAN filter when initializing, if there is no VLAN(except VLAN 0) id added, the driver will disable it in service task. In most time, it works fine. But there is a time window before the service task shceduled and net device being registered. So if user adds VLAN at this time, the driver will not update the VLAN filter state, and the port VLAN filter remains enabled. To fix the problem, if support modify VLAN filter state but not support bypass port VLAN filter, set the port vlan filter to "off". Fixes: 184cd221 ("net: hns3: disable port VLAN filter when support function level VLAN filter control") Fixes: 2ba30662 ("net: hns3: add support for modify VLAN filter state") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
Simon Horman <horms@kernel.org> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Peiyang Wang authored
There is a memory barrier in followed case. When set the port down, hclgevf_set_timmer will set DOWN in state. Meanwhile, the service task has different behaviour based on whether the state is DOWN. Thus, to make sure service task see DOWN, use smp_mb__after_atomic after calling set_bit(). CPU0 CPU1 ========================== =================================== hclgevf_set_timer_task() hclgevf_periodic_service_task() set_bit(DOWN,state) test_bit(DOWN,state) pf also has this issue. Fixes: ff200099 ("net: hns3: remove unnecessary work in hclgevf_main") Fixes: 1c6dfe6f ("net: hns3: remove mailbox and reset work in hclge_main") Signed-off-by:Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by:
-
Peiyang Wang authored
During the PF initialization process, hclge_update_port_info may return an error code for some reason. At this point, the ptp initialization has been completed. To void memory leaks, the resources that are applied by ptp should be released. Therefore, when hclge_update_port_info returns an error code, hclge_ptp_uninit is called to release the corresponding resources. Fixes: eaf83ae5 ("net: hns3: add querying fec ability from firmware") Signed-off-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
-
Peiyang Wang authored
It provides nodemask_t to describe the numa node mask in kernel. To improve transportability, change the type of numa_node_mask as nodemask_t. Fixes: 38caee9d ("net: hns3: Add support of the HNAE3 framework") Signed-off-by:
-
Jian Shen authored
Currently, the driver didn't return when receive a unknown mailbox message, and continue checking whether need to generate a response. It's unnecessary and may be incorrect. Fixes: bb5790b7 ("net: hns3: refactor mailbox response scheme between PF and VF") Signed-off-by:
Jian Shen <shenjian15@huawei.com> Signed-off-by:
-
Peiyang Wang authored
When a reset occurring, it's supposed to recover user's configuration. Currently, the port info(speed, duplex and autoneg) is stored in hclge_mac and will be scheduled updated. Consider the case that reset was happened consecutively. During the first reset, the port info is configured with a temporary value cause the PHY is reset and looking for best link config. Second reset start and use pervious configuration which is not the user's. The specific process is as follows: +------+ +----+ +----+ | USER | | PF | | HW | +---+--+ +-+--+ +-+--+ | ethtool --reset | | +------------------->| reset command | | ethtool --reset +-------------------->| +------------------->| +---+ | +---+ | | | | |reset currently | | HW RESET | | |and wait to do | | | |<--+ | | | | send pervious cfg |<--+ | | (1000M FULL AN_ON) | | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | reset command |<--+ | +-------------------->| | | +---+ | | send pervious cfg | | HW RESET | | (10M HALF AN_OFF) |<--+ | +-------------------->| | | read cfg(time task) | | | (10M HALF AN_OFF) +---+ | |<--------------------+ | cfg take effect | | | | | | read cfg(time task) |<--+ | | (10M HALF AN_OFF) | | |<--------------------+ | | | v v v To avoid aboved situation, this patch introduced req_speed, req_duplex, req_autoneg to store user's configuration and it only be used after hardware reset and to recover user's configuration Fixes: f5f2b3e4 ("net: hns3: add support for imp-controlled PHYs") Signed-off-by:Przemek Kitszel <przemyslaw.kitszel@intel.com> Reviewed-by:
-
Wen Gu authored
In smc_ib_find_route(), the neighbour found by neigh_lookup() and rtable resolved by ip_route_output_flow() are not released or put before return. It may cause the refcount leak, so fix it. Link: https://lore.kernel.org/r/20240506015439.108739-1-guwen@linux.alibaba.com Fixes: e5c4744c ("net/smc: add SMC-Rv2 connection establishment") Signed-off-by:
Wen Gu <guwen@linux.alibaba.com> Link: https://lore.kernel.org/r/20240507125331.2808-1-guwen@linux.alibaba.comSigned-off-by:
-
Eric Dumazet authored
According to syzbot, there is a chance that ip6_dst_idev() returns NULL in ip6_output(). Most places in IPv6 stack deal with a NULL idev just fine, but not here. syzbot reported: general protection fault, probably for non-canonical address 0xdffffc00000000bc: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x00000000000005e0-0x00000000000005e7] CPU: 0 PID: 9775 Comm: syz-executor.4 Not tainted 6.9.0-rc5-syzkaller-00157-g6a30653b #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:ip6_output+0x231/0x3f0 net/ipv6/ip6_output.c:237 Code: 3c 1e 00 49 89 df 74 08 4c 89 ef e8 19 58 db f7 48 8b 44 24 20 49 89 45 00 49 89 c5 48 8d 9d e0 05 00 00 48 89 d8 48 c1 e8 03 <42> 0f b6 04 38 84 c0 4c 8b 74 24 28 0f 85 61 01 00 00 8b 1b 31 ff RSP: 0018:ffffc9000927f0d8 EFLAGS: 00010202 RAX: 00000000000000bc RBX: 00000000000005e0 RCX: 0000000000040000 RDX: ffffc900131f9000 RSI: 0000000000004f47 RDI: 0000000000004f48 RBP: 0000000000000000 R08: ffffffff8a1f0b9a R09: 1ffffffff1f51fad R10: dffffc0000000000 R11: fffffbfff1f51fae R12: ffff8880293ec8c0 R13: ffff88805d7fc000 R14: 1ffff1100527d91a R15: dffffc0000000000 FS: 00007f135c6856c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000080 CR3: 0000000064096000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> NF_HOOK include/linux/netfilter.h:314 [inline] ip6_xmit+0xefe/0x17f0 net/ipv6/ip6_output.c:358 sctp_v6_xmit+0x9f2/0x13f0 net/sctp/ipv6.c:248 sctp_packet_transmit+0x26ad/0x2ca0 net/sctp/output.c:653 sctp_packet_singleton+0x22c/0x320 net/sctp/outqueue.c:783 sctp_outq_flush_ctrl net/sctp/outqueue.c:914 [inline] sctp_outq_flush+0x6d5/0x3e20 net/sctp/outqueue.c:1212 sctp_side_effects net/sctp/sm_sideeffect.c:1198 [inline] sctp_do_sm+0x59cc/0x60c0 net/sctp/sm_sideeffect.c:1169 sctp_primitive_ASSOCIATE+0x95/0xc0 net/sctp/primitive.c:73 __sctp_connect+0x9cd/0xe30 net/sctp/socket.c:1234 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 778d80be ("ipv6: Add disable_ipv6 sysctl to disable IPv6 operaion on specific interface.") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Larysa Zaremba <larysa.zaremba@intel.com> Link: https://lore.kernel.org/r/20240507161842.773961-1-edumazet@google.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Lukasz Majewski authored
Up till now the code to start HSR announce timer, which triggers sending supervisory frames, was assuming that hsr_netdev_notify() would be called at least twice for hsrX interface. This was required to have different values for old and current values of network device's operstate. This is problematic for a case where hsrX interface is already in the operational state when hsr_netdev_notify() is called, so timer is not configured to trigger and as a result the hsrX is not sending supervisory frames to HSR ring. This error has been discovered when hsr_ping.sh script was run. To be more specific - for the hsr1 and hsr2 the hsr_netdev_notify() was called at least twice with different IF_OPER_{LOWERDOWN|DOWN|UP} states assigned in hsr_check_carrier_and_operstate(hsr). As a result there was no issue with sending supervisory frames. However, with hsr3, the notify function was called only once with operstate set to IF_OPER_UP and timer responsible for triggering supervisory frames was not fired. The solution is to use netif_oper_up() and netif_running() helper functions to assess if network hsrX device is up. Only then, when the timer is not already pending, it is started. Otherwise it is deactivated. Fixes: f421436a ("net/hsr: Add support for the High-availability Seamless Redundancy protocol (HSRv0)") Signed-off-by:Lukasz Majewski <lukma@denx.de> Reviewed-by:
-
Eric Dumazet authored
syzbot is able to trigger the following crash [1], caused by unsafe ip6_dst_idev() use. Indeed ip6_dst_idev() can return NULL, and must always be checked. [1] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN PTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 0 PID: 31648 Comm: syz-executor.0 Not tainted 6.9.0-rc4-next-20240417-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/27/2024 RIP: 0010:__fib6_rule_action net/ipv6/fib6_rules.c:237 [inline] RIP: 0010:fib6_rule_action+0x241/0x7b0 net/ipv6/fib6_rules.c:267 Code: 02 00 00 49 8d 9f d8 00 00 00 48 89 d8 48 c1 e8 03 42 80 3c 20 00 74 08 48 89 df e8 f9 32 bf f7 48 8b 1b 48 89 d8 48 c1 e8 03 <42> 80 3c 20 00 74 08 48 89 df e8 e0 32 bf f7 4c 8b 03 48 89 ef 4c RSP: 0018:ffffc9000fc1f2f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 1a772f98c8186700 RDX: 0000000000000003 RSI: ffffffff8bcac4e0 RDI: ffffffff8c1f9760 RBP: ffff8880673fb980 R08: ffffffff8fac15ef R09: 1ffffffff1f582bd R10: dffffc0000000000 R11: fffffbfff1f582be R12: dffffc0000000000 R13: 0000000000000080 R14: ffff888076509000 R15: ffff88807a029a00 FS: 00007f55e82ca6c0(0000) GS:ffff8880b9400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b31d23000 CR3: 0000000022b66000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> fib_rules_lookup+0x62c/0xdb0 net/core/fib_rules.c:317 fib6_rule_lookup+0x1fd/0x790 net/ipv6/fib6_rules.c:108 ip6_route_output_flags_noref net/ipv6/route.c:2637 [inline] ip6_route_output_flags+0x38e/0x610 net/ipv6/route.c:2649 ip6_route_output include/net/ip6_route.h:93 [inline] ip6_dst_lookup_tail+0x189/0x11a0 net/ipv6/ip6_output.c:1120 ip6_dst_lookup_flow+0xb9/0x180 net/ipv6/ip6_output.c:1250 sctp_v6_get_dst+0x792/0x1e20 net/sctp/ipv6.c:326 sctp_transport_route+0x12c/0x2e0 net/sctp/transport.c:455 sctp_assoc_add_peer+0x614/0x15c0 net/sctp/associola.c:662 sctp_connect_new_asoc+0x31d/0x6c0 net/sctp/socket.c:1099 __sctp_connect+0x66d/0xe30 net/sctp/socket.c:1197 sctp_connect net/sctp/socket.c:4819 [inline] sctp_inet_connect+0x149/0x1f0 net/sctp/socket.c:4834 __sys_connect_file net/socket.c:2048 [inline] __sys_connect+0x2df/0x310 net/socket.c:2065 __do_sys_connect net/socket.c:2075 [inline] __se_sys_connect net/socket.c:2072 [inline] __x64_sys_connect+0x7a/0x90 net/socket.c:2072 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xf5/0x240 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Fixes: 5e5f3f0f ("[IPV6] ADDRCONF: Convert ipv6_get_saddr() to ipv6_dev_get_saddr().") Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240507163145.835254-1-edumazet@google.comSigned-off-by:
-
Daniel Golle authored
Several clocks as well as both sgmiisys phandles were added by mistake to the Ethernet bindings for MT7988. Also, the total number of clocks didn't match with the actual number of items listed. This happened because the vendor driver which served as a reference uses a high number of syscon phandles to access various parts of the SoC which wasn't acceptable upstream. Hence several parts which have never previously been supported (such SerDes PHY and USXGMII PCS) are going to be implemented by separate drivers. As a result the device tree will look much more sane. Quickly align the bindings with the upcoming reality of the drivers actually adding support for the remaining Ethernet-related features of the MT7988 SoC. Fixes: c94a9aab ("dt-bindings: net: mediatek,net: add mt7988-eth binding") Signed-off-by:
Daniel Golle <daniel@makrotopia.org> Acked-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/1569290b21cc787a424469ed74456a7e976b102d.1715084326.git.daniel@makrotopia.orgSigned-off-by:
-
- 08 May, 2024 9 commits
-
-
Jakub Kicinski authored
David Howells says: ==================== rxrpc: Miscellaneous fixes (part) Here some miscellaneous fixes for AF_RXRPC: (1) Fix the congestion control algorithm to start cwnd at 4 and to not cut ssthresh when the peer cuts its rwind size. (2) Only transmit a single ACK for all the DATA packets glued together into a jumbo packet to reduce the number of ACKs being generated. ==================== Link: https://lore.kernel.org/r/20240503150749.1001323-1-dhowells@redhat.comSigned-off-by: -
David Howells authored
Only generate one ACK packet for all the subpackets in a jumbo packet. If we would like to generate more than one ACK, we prioritise them base on their reason code, in the order, highest first: OutOfSeq > NoSpace > ExceedsWin > Duplicate > Requested > Delay > Idle For the first four, we reference the lowest offending subpacket; for the last three, the highest. This reduces the number of ACKs we end up transmitting to one per UDP packet transmitted to reduce network loading and packet parsing. Fixes: 5d7edbc9 ("rxrpc: Get rid of the Rx ring") Signed-off-by:
David Howells <dhowells@redhat.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Reviewed-by:
Jeffrey Altman <jaltman@auristor.com <mailto:jaltman@auristor.com>> Link: https://lore.kernel.org/r/20240503150749.1001323-3-dhowells@redhat.comSigned-off-by:
-
David Howells authored
Make the following fixes to the congestion control algorithm: (1) Don't vary the cwnd starting value by the size of RXRPC_TX_SMSS since that's currently held constant - set to the size of a jumbo subpacket payload so that we can create jumbo packets on the fly. The current code invariably picks 3 as the starting value. Further, the starting cwnd needs to be an even number because we ack every other packet, so set it to 4. (2) Don't cut ssthresh when we see an ACK come from the peer with a receive window (rwind) less than ssthresh. ssthresh keeps track of characteristics of the connection whereas rwind may be reduced by the peer for any reason - and may be reduced to 0. Fixes: 1fc4fa2a ("rxrpc: Fix congestion management") Fixes: 08511150 ("rxrpc: Reduce ssthresh to peer's receive window") Signed-off-by:Simon Wilkinson <sxw@auristor.com> cc: Marc Dionne <marc.dionne@auristor.com> cc: linux-afs@lists.infradead.org Reviewed-by:
-
Ido Schimmel authored
When creating the topology for the test, three veth pairs are created in the initial network namespace before being moved to one of the network namespaces created by the test. On systems where systemd-udev uses MACAddressPolicy=persistent (default since systemd version 242), this will result in some net devices having the same MAC address since they were created with the same name in the initial network namespace. In turn, this leads to arping / ndisc6 failing since packets are dropped by the bridge's loopback filter. Fix by creating each net device in the correct network namespace instead of moving it there from the initial network namespace. Reported-by:
Ido Schimmel <idosch@nvidia.com> Link: https://lore.kernel.org/r/20240507113033.1732534-1-idosch@nvidia.comSigned-off-by:
-
Shigeru Yoshida authored
As it was done in commit fc1092f5 ("ipv4: Fix uninit-value access in __ip_make_skb()") for IPv4, check FLOWI_FLAG_KNOWN_NH on fl6->flowi6_flags instead of testing HDRINCL on the socket to avoid a race condition which causes uninit-value access. Fixes: ea30388b ("ipv6: Fix an uninit variable access bug in __ip6_make_skb()") Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Gregor Herburger authored
Different revisions of the Marvell 88q2xxx phy needs different init sequences. Add init sequence for Rev B1 and Rev B2. Rev B2 init sequence skips one register write. Tested-by:
Dimitri Fedrau <dima.fedrau@gmail.com> Signed-off-by:
Gregor Herburger <gregor.herburger@ew.tq-group.com> Signed-off-by:
-
Vincent Duvert authored
When a broadcast AppleTalk packet is received, prefer queuing it on the socket whose address matches the address of the interface that received the packet (and is listening on the correct port). Userspace applications that handle such packets will usually send a response on the same socket that received the packet; this fix allows the response to be sent on the correct interface. If a socket matching the interface's address is not found, an arbitrary socket listening on the correct port will be used, if any. This matches the implementation's previous behavior. Fixes atalkd's responses to network information requests when multiple network interfaces are configured to use AppleTalk. Link: https://lore.kernel.org/netdev/20200722113752.1218-2-vincent.ldev@duvert.net/ Link: https://gist.github.com/VinDuv/4db433b6dce39d51a5b7847ee749b2a4Signed-off-by:
Vincent Duvert <vincent.ldev@duvert.net> Signed-off-by:
Doug Brown <doug@schmorgal.com> Signed-off-by:
-
Felix Fietkau authored
The change from skb_copy to pskb_copy unfortunately changed the data copying to omit the ethernet header, since it was pulled before reaching this point. Fix this by calling __skb_push/pull around pskb_copy. Fixes: 59c878cb ("net: bridge: fix multicast-to-unicast with fraglist GSO") Signed-off-by:
Felix Fietkau <nbd@nbd.name> Acked-by:
Nikolay Aleksandrov <razor@blackwall.org> Signed-off-by:
-
Gregory Detal authored
The current behavior is to accept any strings as inputs, this results in an inconsistent result where an unexisting scheduler can be set: # sysctl -w net.mptcp.scheduler=notdefault net.mptcp.scheduler = notdefault This patch changes this behavior by checking for existing scheduler before accepting the input. Fixes: e3b2870b ("mptcp: add a new sysctl scheduler") Cc: stable@vger.kernel.org Signed-off-by:
Gregory Detal <gregory.detal@gmail.com> Reviewed-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Tested-by:
Geliang Tang <geliang@kernel.org> Reviewed-by:
Mat Martineau <martineau@kernel.org> Signed-off-by:
-
- 07 May, 2024 3 commits
-
-
Tetsuo Handa authored
Commit 7e8cdc97 ("nfc: Add KCOV annotations") added kcov_remote_start_common()/kcov_remote_stop() pair into nci_rx_work(), with an assumption that kcov_remote_stop() is called upon continue of the for loop. But commit d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") forgot to call kcov_remote_stop() before break of the for loop. Reported-by:
syzbot <syzbot+0438378d6f157baae1a2@syzkaller.appspotmail.com> Closes: https://syzkaller.appspot.com/bug?extid=0438378d6f157baae1a2 Fixes: d24b0353 ("nfc: nci: Fix uninit-value in nci_dev_up and nci_ntf_packet") Suggested-by:
Andrey Konovalov <andreyknvl@gmail.com> Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reviewed-by:
-
Donald Hunter authored
Attributes for FDB learned entries were added to the if_link netlink api for bridge linkinfo but are missing from the rt_link.yaml spec. Add the missing attributes to the spec. Fixes: ddd1ad68 ("net: bridge: Add netlink knobs for number / max learned FDB entries") Signed-off-by:
Donald Hunter <donald.hunter@gmail.com> Acked-by:
Jacob Keller <jacob.e.keller@intel.com> Link: https://lore.kernel.org/r/20240503164304.87427-1-donald.hunter@gmail.comSigned-off-by:
-
Eric Dumazet authored
fill_route() stores three components in the skb: - struct rtmsg - RTA_DST (u8) - RTA_OIF (u32) Therefore, rtm_phonet_notify() should use NLMSG_ALIGN(sizeof(struct rtmsg)) + nla_total_size(1) + nla_total_size(4) Fixes: f062f41d ("Phonet: routing table Netlink interface") Signed-off-by:
Rémi Denis-Courmont <courmisch@gmail.com> Link: https://lore.kernel.org/r/20240502161700.1804476-1-edumazet@google.comSigned-off-by:
-
- 06 May, 2024 1 commit
-
-
Thadeu Lima de Souza Cascardo authored
net_alloc_generic is called by net_alloc, which is called without any locking. It reads max_gen_ptrs, which is changed under pernet_ops_rwsem. It is read twice, first to allocate an array, then to set s.len, which is later used to limit the bounds of the array access. It is possible that the array is allocated and another thread is registering a new pernet ops, increments max_gen_ptrs, which is then used to set s.len with a larger than allocated length for the variable array. Fix it by reading max_gen_ptrs only once in net_alloc_generic. If max_gen_ptrs is later incremented, it will be caught in net_assign_generic. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@igalia.com> Fixes: 073862ba ("netns: fix net_alloc_generic()") Reviewed-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20240502132006.3430840-1-cascardo@igalia.comSigned-off-by:
-
- 03 May, 2024 16 commits
-
-
Potnuri Bharat Teja authored
Add myself(Bharat) as maintainer for cxgb4 and cxgb3 network drivers. Signed-off-by:
Potnuri Bharat Teja <bharat@chelsio.com> Link: https://lore.kernel.org/r/20240502184209.2723379-1-bharat@chelsio.comSigned-off-by:
-
Roded Zats authored
Each attribute inside a nested IFLA_VF_VLAN_LIST is assumed to be a struct ifla_vf_vlan_info so the size of such attribute needs to be at least of sizeof(struct ifla_vf_vlan_info) which is 14 bytes. The current size validation in do_setvfinfo is against NLA_HDRLEN (4 bytes) which is less than sizeof(struct ifla_vf_vlan_info) so this validation is not enough and a too small attribute might be cast to a struct ifla_vf_vlan_info, this might result in an out of bands read access when accessing the saved (casted) entry in ivvl. Fixes: 79aab093 ("net: Update API for VF vlan protocol 802.1ad support") Signed-off-by:
Roded Zats <rzats@paloaltonetworks.com> Reviewed-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecJakub Kicinski authored
Steffen Klassert says: ==================== pull request (net): ipsec 2024-05-02 1) Fix an error pointer dereference in xfrm_in_fwd_icmp. From Antony Antony. 2) Preserve vlan tags for ESP transport mode software GRO. From Paul Davey. 3) Fix a spelling mistake in an uapi xfrm.h comment. From Anotny Antony. * tag 'ipsec-2024-05-02' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: xfrm: Correct spelling mistake in xfrm.h comment xfrm: Preserve vlan tags for transport mode software GRO xfrm: fix possible derferencing in error path ==================== Link: https://lore.kernel.org/r/20240502084838.2269355-1-steffen.klassert@secunet.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - mediatek: mt8183-pico6: Fix bluetooth node - sco: Fix use-after-free bugs caused by sco_sock_timeout - l2cap: fix null-ptr-deref in l2cap_chan_timeout - qca: Various fixes - l2cap: Fix slab-use-after-free in l2cap_connect() - msft: fix slab-use-after-free in msft_do_close() - HCI: Fix potential null-ptr-deref * tag 'for-net-2024-05-03' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: qca: fix firmware check error path Bluetooth: l2cap: fix null-ptr-deref in l2cap_chan_timeout Bluetooth: HCI: Fix potential null-ptr-deref arm64: dts: mediatek: mt8183-pico6: Fix bluetooth node Bluetooth: qca: fix info leak when fetching board id Bluetooth: qca: fix info leak when fetching fw build id Bluetooth: qca: generalise device address check Bluetooth: qca: fix NVM configuration parsing Bluetooth: qca: add missing firmware sanity checks Bluetooth: msft: fix slab-use-after-free in msft_do_close() Bluetooth: L2CAP: Fix slab-use-after-free in l2cap_connect() Bluetooth: qca: fix wcn3991 device address check Bluetooth: Fix use-after-free bugs caused by sco_sock_timeout ==================== Link: https://lore.kernel.org/r/20240503171933.3851244-1-luiz.dentz@gmail.comSigned-off-by:
-
Marek Vasut authored
Currently the driver uses local_bh_disable()/local_bh_enable() in its IRQ handler to avoid triggering net_rx_action() softirq on exit from netif_rx(). The net_rx_action() could trigger this driver .start_xmit callback, which is protected by the same lock as the IRQ handler, so calling the .start_xmit from netif_rx() from the IRQ handler critical section protected by the lock could lead to an attempt to claim the already claimed lock, and a hang. The local_bh_disable()/local_bh_enable() approach works only in case the IRQ handler is protected by a spinlock, but does not work if the IRQ handler is protected by mutex, i.e. this works for KS8851 with Parallel bus interface, but not for KS8851 with SPI bus interface. Remove the BH manipulation and instead of calling netif_rx() inside the IRQ handler code protected by the lock, queue all the received SKBs in the IRQ handler into a queue first, and once the IRQ handler exits the critical section protected by the lock, dequeue all the queued SKBs and push them all into netif_rx(). At this point, it is safe to trigger the net_rx_action() softirq, since the netif_rx() call is outside of the lock that protects the IRQ handler. Fixes: be0384bf ("net: ks8851: Handle softirqs at the end of IRQ thread to fix hang") Tested-by: Ronald Wahl <ronald.wahl@raritan.com> # KS8851 SPI Signed-off-by:
Marek Vasut <marex@denx.de> Reviewed-by:
-
Johan Hovold authored
A recent commit fixed the code that parses the firmware files before downloading them to the controller but introduced a memory leak in case the sanity checks ever fail. Make sure to free the firmware buffer before returning on errors. Fixes: f905ae0be4b7 ("Bluetooth: qca: add missing firmware sanity checks") Cc: stable@vger.kernel.org # 4.19 Signed-off-by:Johan Hovold <johan+linaro@kernel.org> Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Duoming Zhou authored
There is a race condition between l2cap_chan_timeout() and l2cap_chan_del(). When we use l2cap_chan_del() to delete the channel, the chan->conn will be set to null. But the conn could be dereferenced again in the mutex_lock() of l2cap_chan_timeout(). As a result the null pointer dereference bug will happen. The KASAN report triggered by POC is shown below: [ 472.074580] ================================================================== [ 472.075284] BUG: KASAN: null-ptr-deref in mutex_lock+0x68/0xc0 [ 472.075308] Write of size 8 at addr 0000000000000158 by task kworker/0:0/7 [ 472.075308] [ 472.075308] CPU: 0 PID: 7 Comm: kworker/0:0 Not tainted 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.075308] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.075308] Workqueue: events l2cap_chan_timeout [ 472.075308] Call Trace: [ 472.075308] <TASK> [ 472.075308] dump_stack_lvl+0x137/0x1a0 [ 472.075308] print_report+0x101/0x250 [ 472.075308] ? __virt_addr_valid+0x77/0x160 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_report+0x139/0x170 [ 472.075308] ? mutex_lock+0x68/0xc0 [ 472.075308] kasan_check_range+0x2c3/0x2e0 [ 472.075308] mutex_lock+0x68/0xc0 [ 472.075308] l2cap_chan_timeout+0x181/0x300 [ 472.075308] process_one_work+0x5d2/0xe00 [ 472.075308] worker_thread+0xe1d/0x1660 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] kthread+0x2b7/0x350 [ 472.075308] ? pr_cont_work+0x5e0/0x5e0 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork+0x4d/0x80 [ 472.075308] ? kthread_blkcg+0xd0/0xd0 [ 472.075308] ret_from_fork_asm+0x11/0x20 [ 472.075308] </TASK> [ 472.075308] ================================================================== [ 472.094860] Disabling lock debugging due to kernel taint [ 472.096136] BUG: kernel NULL pointer dereference, address: 0000000000000158 [ 472.096136] #PF: supervisor write access in kernel mode [ 472.096136] #PF: error_code(0x0002) - not-present page [ 472.096136] PGD 0 P4D 0 [ 472.096136] Oops: 0002 [#1] PREEMPT SMP KASAN NOPTI [ 472.096136] CPU: 0 PID: 7 Comm: kworker/0:0 Tainted: G B 6.9.0-rc5-00356-g78c0094a146b #36 [ 472.096136] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu4 [ 472.096136] Workqueue: events l2cap_chan_timeout [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.096136] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.096136] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.096136] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.096136] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.096136] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.096136] Call Trace: [ 472.096136] <TASK> [ 472.096136] ? __die_body+0x8d/0xe0 [ 472.096136] ? page_fault_oops+0x6b8/0x9a0 [ 472.096136] ? kernelmode_fixup_or_oops+0x20c/0x2a0 [ 472.096136] ? do_user_addr_fault+0x1027/0x1340 [ 472.096136] ? _printk+0x7a/0xa0 [ 472.096136] ? mutex_lock+0x68/0xc0 [ 472.096136] ? add_taint+0x42/0xd0 [ 472.096136] ? exc_page_fault+0x6a/0x1b0 [ 472.096136] ? asm_exc_page_fault+0x26/0x30 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] ? mutex_lock+0x88/0xc0 [ 472.096136] ? mutex_lock+0x75/0xc0 [ 472.096136] l2cap_chan_timeout+0x181/0x300 [ 472.096136] process_one_work+0x5d2/0xe00 [ 472.096136] worker_thread+0xe1d/0x1660 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] kthread+0x2b7/0x350 [ 472.096136] ? pr_cont_work+0x5e0/0x5e0 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork+0x4d/0x80 [ 472.096136] ? kthread_blkcg+0xd0/0xd0 [ 472.096136] ret_from_fork_asm+0x11/0x20 [ 472.096136] </TASK> [ 472.096136] Modules linked in: [ 472.096136] CR2: 0000000000000158 [ 472.096136] ---[ end trace 0000000000000000 ]--- [ 472.096136] RIP: 0010:mutex_lock+0x88/0xc0 [ 472.096136] Code: be 08 00 00 00 e8 f8 23 1f fd 4c 89 f7 be 08 00 00 00 e8 eb 23 1f fd 42 80 3c 23 00 74 08 48 88 [ 472.096136] RSP: 0018:ffff88800744fc78 EFLAGS: 00000246 [ 472.096136] RAX: 0000000000000000 RBX: 1ffff11000e89f8f RCX: ffffffff8457c865 [ 472.096136] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88800744fc78 [ 472.096136] RBP: 0000000000000158 R08: ffff88800744fc7f R09: 1ffff11000e89f8f [ 472.132932] R10: dffffc0000000000 R11: ffffed1000e89f90 R12: dffffc0000000000 [ 472.132932] R13: 0000000000000158 R14: ffff88800744fc78 R15: ffff888007405a00 [ 472.132932] FS: 0000000000000000(0000) GS:ffff88806d200000(0000) knlGS:0000000000000000 [ 472.132932] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 472.132932] CR2: 0000000000000158 CR3: 000000000da32000 CR4: 00000000000006f0 [ 472.132932] Kernel panic - not syncing: Fatal exception [ 472.132932] Kernel Offset: disabled [ 472.132932] ---[ end Kernel panic - not syncing: Fatal exception ]--- Add a check to judge whether the conn is null in l2cap_chan_timeout() in order to mitigate the bug. Fixes: 3df91ea2 ("Bluetooth: Revert to mutexes from RCU list") Signed-off-by:
Duoming Zhou <duoming@zju.edu.cn> Signed-off-by:
-
Sungwoo Kim authored
Fix potential null-ptr-deref in hci_le_big_sync_established_evt(). Fixes: f777d882 (Bluetooth: ISO: Notify user space about failed bis connections) Signed-off-by:
Sungwoo Kim <iam@sung-woo.kim> Signed-off-by:
-
Chen-Yu Tsai authored
Bluetooth is not a random device connected to the MMC/SD controller. It is function 2 of the SDIO device. Fix the address of the bluetooth node. Also fix the node name and drop the label. Fixes: 055ef10c ("arm64: dts: mt8183: Add jacuzzi pico/pico6 board") Signed-off-by:
Chen-Yu Tsai <wenst@chromium.org> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Johan Hovold authored
Add the missing sanity check when fetching the board id to avoid leaking slab data when later requesting the firmware. Fixes: a7f8dedb ("Bluetooth: qca: add support for QCA2066") Cc: stable@vger.kernel.org # 6.7 Cc: Tim Jiang <quic_tjiang@quicinc.com> Signed-off-by:
-
Johan Hovold authored
Add the missing sanity checks and move the 255-byte build-id buffer off the stack to avoid leaking stack data through debugfs in case the build-info reply is malformed. Fixes: c0187b0b ("Bluetooth: btqca: Add support to read FW build version for WCN3991 BTSoC") Cc: stable@vger.kernel.org # 5.12 Signed-off-by:
-
Johan Hovold authored
The default device address apparently comes from the NVM configuration file and can differ quite a bit between controllers. Store the default address when parsing the configuration file and use it to determine whether the controller has been provisioned with an address. This makes sure that devices without a unique address start as unconfigured unless a valid address has been provided in the devicetree. Fixes: 32868e12 ("Bluetooth: qca: fix invalid device address check") Cc: stable@vger.kernel.org # 6.5 Cc: Doug Anderson <dianders@chromium.org> Cc: Janaki Ramaiah Thota <quic_janathot@quicinc.com> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
Johan Hovold authored
The NVM configuration files used by WCN3988 and WCN3990/1/8 have two sets of configuration tags that are enclosed by a type-length header of type four which the current parser fails to account for. Instead the driver happily parses random data as if it were valid tags, something which can lead to the configuration data being corrupted if it ever encounters the words 0x0011 or 0x001b. As is clear from commit b6388254 ("Bluetooth: btqca: Fix the NVM baudrate tag offcet for wcn3991") the intention has always been to process the configuration data also for WCN3991 and WCN3998 which encodes the baud rate at a different offset. Fix the parser so that it can handle the WCN3xxx configuration files, which has an enclosing type-length header of type four and two sets of TLV tags enclosed by a type-length header of type two and three, respectively. Note that only the first set, which contains the tags the driver is currently looking for, will be parsed for now. With the parser fixed, the software in-band sleep bit will now be set for WCN3991 and WCN3998 (as it is for later controllers) and the default baud rate 3200000 may be updated by the driver also for WCN3xxx controllers. Notably the deep-sleep feature bit is already set by default in all configuration files in linux-firmware. Fixes: 4219d468 ("Bluetooth: btqca: Add wcn3990 firmware download support.") Cc: stable@vger.kernel.org # 4.19 Cc: Matthias Kaehlcke <mka@chromium.org> Signed-off-by:
-
Johan Hovold authored
Add the missing sanity checks when parsing the firmware files before downloading them to avoid accessing and corrupting memory beyond the vmalloced buffer. Fixes: 83e81961 ("Bluetooth: btqca: Introduce generic QCA ROME support") Cc: stable@vger.kernel.org # 4.10 Signed-off-by:
-
Sungwoo Kim authored
Tying the msft->data lifetime to hdev by freeing it in hci_release_dev() to fix the following case: [use] msft_do_close() msft = hdev->msft_data; if (!msft) ...(1) <- passed. return; mutex_lock(&msft->filter_lock); ...(4) <- used after freed. [free] msft_unregister() msft = hdev->msft_data; hdev->msft_data = NULL; ...(2) kfree(msft); ...(3) <- msft is freed. ================================================================== BUG: KASAN: slab-use-after-free in __mutex_lock_common kernel/locking/mutex.c:587 [inline] BUG: KASAN: slab-use-after-free in __mutex_lock+0x8f/0xc30 kernel/locking/mutex.c:752 Read of size 8 at addr ffff888106cbbca8 by task kworker/u5:2/309 Fixes: bf6a4e30 ("Bluetooth: disable advertisement filters during suspend") Signed-off-by: -
Sungwoo Kim authored
Extend a critical section to prevent chan from early freeing. Also make the l2cap_connect() return type void. Nothing is using the returned value but it is ugly to return a potentially freed pointer. Making it void will help with backports because earlier kernels did use the return value. Now the compile will break for kernels where this patch is not a complete fix. Call stack summary: [use] l2cap_bredr_sig_cmd l2cap_connect ┌ mutex_lock(&conn->chan_lock); │ chan = pchan->ops->new_connection(pchan); <- alloc chan │ __l2cap_chan_add(conn, chan); │ l2cap_chan_hold(chan); │ list_add(&chan->list, &conn->chan_l); ... (1) └ mutex_unlock(&conn->chan_lock); chan->conf_state ... (4) <- use after free [free] l2cap_conn_del ┌ mutex_lock(&conn->chan_lock); │ foreach chan in conn->chan_l: ... (2) │ l2cap_chan_put(chan); │ l2cap_chan_destroy │ kfree(chan) ... (3) <- chan freed └ mutex_unlock(&conn->chan_lock); ================================================================== BUG: KASAN: slab-use-after-free in instrument_atomic_read include/linux/instrumented.h:68 [inline] BUG: KASAN: slab-use-after-free in _test_bit include/asm-generic/bitops/instrumented-non-atomic.h:141 [inline] BUG: KASAN: slab-use-after-free in l2cap_connect+0xa67/0x11a0 net/bluetooth/l2cap_core.c:4260 Read of size 8 at addr ffff88810bf040a0 by task kworker/u3:1/311 Fixes: 73ffa904 ("Bluetooth: Move conf_{req,rsp} stuff to struct l2cap_chan") Signed-off-by:
-
