The Low Voltage Thermal Sensor (LVTS) is a multiple sensors, multi
controllers contained in a thermal domain.

A thermal domains can be the MCU or the AP.

Each thermal domains contain up to seven controllers, each thermal
controller handle up to four thermal sensors.

The LVTS has two Finite State Machines (FSM), one to handle the
functionin temperatures range like hot or cold temperature and another
one to handle monitoring trip point. The FSM notifies via interrupts
when a trip point is crossed.

The interrupt is managed at the thermal controller level, so when an
interrupt occurs, the driver has to find out which sensor triggered
such an interrupt.

The sampling of the thermal can be filtered or immediate. For the
former, the LVTS measures several points and applies a low pass
filter.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>

On MT8195 Tomato Chromebook:
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230209105628.50294-5-bchihi@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add LVTS thermal controllers dt-binding definition for mt8192 and mt8195.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230209105628.50294-3-bchihi@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add MediaTek proprietary folder to upstream more thermal zone and cooler
drivers, relocate the original thermal controller driver to it, and rename it
as "auxadc_thermal.c" to show its purpose more clearly.
Signed-off-by: Balsam CHIHI <bchihi@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230209105628.50294-2-bchihi@baylibre.comSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

thermal_sampling_init() suscribes to THERMAL_GENL_SAMPLING_GROUP_NAME group
so thermal_sampling_exit() should unsubscribe from the same group.

Fixes: 47c4b0de ("tools/lib/thermal: Add a thermal library")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lore.kernel.org/r/20230202102812.453357-1-vincent.guittot@linaro.orgSigned-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge thermal control changes related to Intel platforms for 6.3-rc1:

 - Rework ACPI helper functions for thermal control to retrieve a trip
   point temperature instead of initializing a trip point objetc (Rafael
   Wysocki).

 - Clean up and improve the int340x thermal driver ((Rafael Wysocki).

 - Simplify and clean up the intel_pch thermal driver ((Rafael Wysocki).

 - Fix the Intel powerclamp thermal driver and make it use the common
   idle injection framework (Srinivas Pandruvada).

 - Add two module parameters, cpumask and max_idle, to the Intel powerclamp
   thermal driver to allow it to affect only a specific subset of CPUs
   instead of all of them (Srinivas Pandruvada).

 - Make the Intel quark_dts thermal driver Use generic trip point
   objects instead of its own trip point representation (Daniel
   Lezcano).

 - Add toctree entry for thermal documents and fix two issues in the
   Intel powerclamp driver documentation (Bagas Sanjaya).

* thermal-intel: (25 commits)
  Documentation: powerclamp: Fix numbered lists formatting
  Documentation: powerclamp: Escape wildcard in cpumask description
  Documentation: admin-guide: Add toctree entry for thermal docs
  thermal: intel: powerclamp: Add two module parameters
  Documentation: admin-guide: Move intel_powerclamp documentation
  thermal: intel: powerclamp: Fix duration module parameter
  thermal: intel: powerclamp: Return last requested state as cur_state
  thermal: intel: quark_dts: Use generic trip points
  thermal: intel: powerclamp: Use powercap idle-inject feature
  powercap: idle_inject: Add update callback
  powercap: idle_inject: Export symbols
  thermal: intel: powerclamp: Fix cur_state for multi package system
  thermal: intel: intel_pch: Drop struct board_info
  thermal: intel: intel_pch: Rename board ID symbols
  thermal: intel: intel_pch: Fold suspend and resume routines into their callers
  thermal: intel: intel_pch: Fold two functions into their callers
  thermal: intel: intel_pch: Eliminate device operations object
  thermal: intel: intel_pch: Rename device operations callbacks
  thermal: intel: intel_pch: Eliminate redundant return pointers
  thermal: intel: intel_pch: Make pch_wpt_add_acpi_psv_trip() return int
  ...

Merge thermal control core changes for 6.3-rc1:

 - Clean up thermal device unregistration code (Viresh Kumar).

 - Fix and clean up thermal control core initialization error code
   paths (Daniel Lezcano).

 - Relocate the trip points handling code into a separate file (Daniel
   Lezcano).

 - Make the thermal core fail registration of thermal zones and cooling
   devices if the thermal class has not been registered (Rafael Wysocki).

 - Make the core thermal control code use sysfs_emit_at() instead of
   scnprintf() where applicable (ye xingchen).

* thermal-core:
  thermal: core: Use sysfs_emit_at() instead of scnprintf()
  thermal: Fail object registration if thermal class is not registered
  thermal/core: Move the thermal trip code to a dedicated file
  thermal/core: Remove unneeded ida_destroy()
  thermal/core: Fix unregistering netlink at thermal init time
  thermal: core: Use device_unregister() instead of device_del/put()
  thermal: core: Move cdev cleanup to thermal_release()

Texts in numbered lists are rendered as continous paragraph when there
should have been breaks between first line text in the beginning of list
item and the description. Fix this by adding appropriate line breaks and
indent the rest of lines to match the first line of numbered list item.

Fixes: d6d71ee4 ("PM: Introduce Intel PowerClamp Driver")
Fixes: 6bbe6f57 ("docs: thermal: convert to ReST")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

kernel test robot reported htmldocs warning:

Documentation/admin-guide/thermal/intel_powerclamp.rst:328: WARNING: Inline emphasis start-string without end-string.

The mistaken asterisk in /proc/irq/*/smp_affinity is rendered as hyperlink
as the result.

Escape the asterisk to fix above warning.

Link: https://lore.kernel.org/linux-doc/202302122247.N4S791c4-lkp@intel.com/
Fixes: ebf51971 ("thermal: intel: powerclamp: Add two module parameters")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

kernel test robot reported htmldocs warnings:

Documentation/admin-guide/index.rst:62: WARNING: toctree contains reference to nonexisting document 'admin-guide/thermal'
Documentation/admin-guide/thermal/intel_powerclamp.rst: WARNING: document isn't included in any toctree

Add toctree entry for thermal/ docs to fix these warnings.

Link: https://lore.kernel.org/linux-doc/202302121759.MmJgDTxc-lkp@intel.com/
Fixes: 707bf8e1 ("Documentation: admin-guide: Move intel_powerclamp documentation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In some use cases, it is desirable to only inject idle on certain set
of CPUs. For example on Alder Lake systems, it is possible that we force
idle only on P-Cores for thermal reasons. Also the idle percent can be
more than 50% if we only choose partial set of CPUs in the system.

Introduce 2 new module parameters for this purpose. They can be only
changed when the cooling device is inactive.

cpumask (Read/Write): A bit mask of CPUs to inject idle. The format of
this bitmask is same as used in other subsystems like in
/proc/irq/*/smp_affinity. The mask is comma separated 32 bit groups.
Each CPU is one bit. For example for 256 CPU system the full mask is:
ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff,ffffffff
The rightmost mask is for CPU 0-32.

max_idle (Read/Write): Maximum injected idle time to the total CPU time
ratio in percent range from 1 to 100. Even if the cooling device max_state
is always 100 (100%), this parameter allows to add a max idle percent
limit. The default is 50, to match the current implementation of powerclamp
driver. Also doesn't allow value more than 75, if the cpumask includes
every CPU present in the system.

Also when the cpumask doesn't include every CPU, there is no use of
compensation using package C-state idle counters. Hence don't start
package C-state polling thread even for a single package or a single die
system in this case.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Create a folder "thermal" under Documentation/admin-guide and move
intel_powerclamp documentation to this folder.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Follow the advice in Documentation/filesystems/sysfs.rst that show()
should only use sysfs_emit() or sysfs_emit_at() when formatting the
value to be returned to user space.
Signed-off-by: ye xingchen <ye.xingchen@zte.com.cn>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

After the switch to use the powercap/idle-inject framework in the Intel
powerclamp driver, the idle duration unit is microsecond.

However, the module parameter for idle duration is in milliseconds, so
convert it to microseconds in the "set" callback and back to milliseconds
in a new "get" callback.

While here, also use mutex protection for setting and getting "duration".

The other uses of "duration" are already protected by the mutex.

Fixes: 8526eb7f ("thermal: intel: powerclamp: Use powercap idle-inject feature")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

When the user is reading cur_state from the thermal cooling device for
Intel powerclamp device:
 - It returns the idle ratio from Package C-state counters when
   there is active idle injection session.
 - -1, when there is no active idle injection session.

This information is not very useful as the package C-state counters vary
a lot from read to read. Instead just return the last requested cur_state.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Make the intel_quark_dts_thermal driver register an array of generic
trip points along with the thermal zone and drop the trip points
thermal zone callbacks that are not used any more from it.
Signed-off-by: Daniel Lezcano <daniel.lezcano@kernel.org>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

There are two idle injection implementation in the Linux kernel. One
via intel_powerclamp and the other using powercap/idle_inject. Both
implementation end up in calling play_idle* function from a FIFO
priority thread. Both can't be used at the same time.

It is better to use one idle injection framework for better
maintainability. In this way, there is only one caller for play_idle.

Here powercap/idle_inject can be used for both per-core and for system
wide idle injection. This framework has a well defined interface which
allow registry for per-core or for all CPUs (system wide).

This reduces code complexity in the intel powerclamp driver as all the
per CPU kthreads, delayed work and calls to play_idle can be removed.

The changes include:
 - Remove unneeded include files
 - Remove per CPU kthread workers: balancing_work and idle_injection_work.
 - Reuse the compensation related code by moving from previous worker
   thread to idle_injection callback.
 - Adjust the idle_duration and runtime by using powercap/idle_inject
   interface.
 - Remove all variables, which are not required once powercap/idle_inject
   is used.
 - Add mutex to avoid race during removal of idle injection during module
   unload and user action to change idle inject percent. Also for
   protection during dynamic adjustment of run and idle time from
   update() callback.
 - Remove online/offline callbacks to designate control CPU
 - Use cpu_present_mask global variable for CPU mask
 - Remove hot plug locks
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The powercap/idle_inject core uses play_idle_precise() to inject idle
time. But play_idle_precise() can't ensure that the CPU is fully idle
for the specified duration because of wakeups due to interrupts. To
compensate for the reduced idle time due to these wakes, the caller
can adjust requested idle time for the next cycle.

The goal of idle injection is to keep system at some idle percent on
average, so this is fine to overshoot or undershoot instantaneous idle
times.

The idle inject core provides an interface idle_inject_set_duration()
to set idle and runtime duration.

Some architectures provide interface to get actual idle time observed
by the hardware. So, the effective idle percent can be adjusted using
the hardware feedback. For example, Intel CPUs provides package idle
counters, which is currently used by Intel powerclamp driver to
readjust runtime duration.

When the caller's desired idle time over a period is less or greater
than the actual CPU idle time observed by the hardware, caller can
readjust idle and runtime duration for the next cycle.

The only way this can be done currently is by monitoring hardware idle
time from a different software thread and readjust idle and runtime
duration using idle_inject_set_duration().

This can be avoided by adding a callback which callers can register and
readjust from this callback function.

Add a capability to register an optional update() callback, which can be
called from the idle inject core before waking up CPUs for idle injection.
This callback can be registered via a new interface:
idle_inject_register_full().

During this process of constantly adjusting idle and runtime duration
there can be some cases where actual idle time is more than the desired.
In this case idle inject can be skipped for a cycle. If update() callback
returns false, then the idle inject core skips waking up CPUs for the
idle injection.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Export symbols for external interfaces, so that they can be used in
other loadable modules.

Export is done under name space IDLE_INJECT.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The powerclamp cooling device cur_state shows actual idle observed by
package C-state idle counters. But the implementation is not sufficient
for multi package or multi die system. The cur_state value is incorrect.
On these systems, these counters must be read from each package/die and
somehow aggregate them. But there is no good method for aggregation.

It was not a problem when explicit CPU model addition was required to
enable intel powerclamp. In this way certain CPU models could have
been avoided. But with the removal of CPU model check with the
availability of Package C-state counters, the driver is loaded on most
of the recent systems.

For multi package/die systems, just show the actual target idle state,
the system is trying to achieve. In powerclamp this is the user set
state minus one.

Also there is no use of starting a worker thread for polling package
C-state counters and applying any compensation for multiple package
or multiple die systems.

Fixes: b721ca0d ("thermal/powerclamp: remove cpu whitelist")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Cc: 4.14+ <stable@vger.kernel.org> # 4.14+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because the only member of struct board_info is the name, the
board_info[] array of struct board_info elements can be replaced with
an array of strings.

Modify the code accordingly and drop struct board_info.

No intentional functional impact.
Suggested-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Use capitals in the names of the board ID symbols and add the PCH_
prefix to each of them for consistency.

Also rename the board_ids enum accordingly.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Fold pch_suspend() and pch_resume(), that each have only one caller,
into their respective callers to make the code somewhat easier to
follow.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Fold two functions, pch_hw_init() and pch_get_temp(), that each have
only one caller, into their respective callers to make the code somewhat
easier to follow.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

The same device operations object is pointed to by all of the board
configurations in the driver, so effectively the same operations
callbacks are used by all of them which only adds overhead (that can
be significant due to retpolines) for no real purpose.

For this reason, drop the device operations object and replace the
respective callback invocations by direct calls to the specific
functions that were previously pointed to by callback pointers.

No intentional change in behavior.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Because the same device operations callbacks are used for all supported
boards, they are in fact generic, so rename them to reflect that.

Also rename the operations object itself for consistency.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Both pch_wpt_init() and pch_wpt_get_temp() can return the proper
result via their return values, so they do not need to use return
pointers.

Modify them accordingly.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Modify pch_wpt_add_acpi_psv_trip() to return an int value instead of
using a return pointer for that.

While at it, drop an excessive empty code line.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Instead of using snprintf() to populate the ACPI object name in
int340x_thermal_set_trip_temp(), use an appropriate initializer
and make the function fail if its trip argument is greater than 9,
because ACPI object names can only be 4 characters long and it does
not make sense to even try to evaluate objects with longer names (that
argument is guaranteed to be non-negative, because it comes from the
thermal code that will not pass negative trip numbers to zone
callbacks).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

The explicit casting from int to unsigned long in
int340x_thermal_get_zone_temp() is pointless, becuase the multiplication
result is cast back to int by the assignment in the same statement, so
drop it.

No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Rename local variables int34x_thermal_zone in int340x_thermal_zone_add()
and int340x_thermal_zone_remove() to int34x_zone which allows a number
of code lines to be shorter and easier to read and adjust some white
space for consistency.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

Improve some inconsistent usage of white space in int340x_thermal_zone.c,
fix up one coding style issue in it (missing braces around an else
branch of a conditional) and while at it replace a !ACPI_FAILURE()
check with an equivalent ACPI_SUCCESS() one.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Zhang Rui <rui.zhang@intel.com>

It is slightly better to make the ACPI thermal helper functions retrieve
the trip point temperature only instead of doing the full trip point
initialization, because they are also used for updating some already
registered trip points, in which case initializing a new trip just
in order to update the temperature of an existing one is somewhat
wasteful.

Modify the ACPI thermal helpers accordingly and update their users.

No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>

Merge changes affecting thermal control on Intel platforms for 6.3-rc1:

 - Consolidate code accessing the Intel TCC (Thermal Control Circuitry)
   MSRs by introducing library functions for that and making the
   TCC-related code in thermal drivers use them (Zhang Rui).

 - Enhance the x86_pkg_temp_thermal driver to support dynamic tjmax
   changes (Zhang Rui).

 - Address an "unsigned expression compared with zero" warning in the
   intel_soc_dts_iosf thermal driver (Yang Li).

 - Update comments regarding two functions in the Intel Menlow thermal
   driver (Deming Wang).

 - Use sysfs_emit_at() instead of scnprintf() in the int340x thermal
   driver (ye xingchen).

 - Make the intel_pch thermal driver support the Wellsburg PCH (Tim
   Zimmermann).

 - Add trip point initialization helper functions for ACPI-defined trip
   points and modify two thermal drivers to use them (Rafael Wysocki,
   Daniel Lezcano).

 - Modify the intel_pch and processor_thermal_device_pci thermal drivers
   use generic trip point tables instead of thermal zone trip point
   callbacks (Daniel Lezcano).

 - Add production mode attribute sysfs attribute to the int340x thermal
   driver (Srinivas Pandruvada).

 - Rework dynamic trip point updates handling and locking in the int340x
   thermal driver (Rafael Wysocki).

 - Make the int340x thermal driver use a generic trip points table
   instead of thermal zone trip point callbacks (Rafael Wysocki, Daniel
   Lezcano).

* thermal-intel:
  thermal: intel: int340x: Use generic trip points table
  thermal: intel: int340x: Use zone lock for synchronization
  thermal: intel: int340x: Rework updating trip points
  thermal: ACPI: Initialize trips if temperature is out of range
  thermal: intel: processor_thermal_device_pci: Use generic trip point
  thermal: intel: int340x: Add production mode attribute
  thermal: intel: intel_pch: Use generic trip points
  thermal: ACPI: Add ACPI trip point routines
  thermal: intel: intel_pch: Add support for Wellsburg PCH
  thermal: int340x_thermal: Use sysfs_emit_at() instead of scnprintf()
  thermal: intel: menlow: Update function descriptions
  thermal: intel: Fix unsigned comparison with less than zero
  thermal/x86_pkg_temp_thermal: Add support for handling dynamic tjmax
  thermal/x86_pkg_temp_thermal: Use Intel TCC library
  thermal/intel/intel_tcc_cooling: Use Intel TCC library
  thermal/intel/intel_soc_dts_iosf: Use Intel TCC library
  thermal/int340x/processor_thermal: Use Intel TCC library
  thermal/intel: Introduce Intel TCC library

Modify int340x_thermal_zone_add() to register the thermal zone along
with a trip points table, which allows the trip-related zone callbacks
to be dropped, because they are not needed any more.

In order to consolidate the code, use ACPI trip library functions to
populate generic trip points in int340x_thermal_read_trips() and to
update them in int340x_thermal_update_trips().
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Co-developed-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Because the ->get_trip_temp() and ->get_trip_type() thermal zone
callbacks are only invoked from __thermal_zone_get_trip() which is
always called by the thermal core under the zone lock, it is sufficient
for int340x_thermal_update_trips() to acquire the zone lock for mutual
exclusion with those callbacks.

Accordingly, modify int340x_thermal_update_trips() to use the zone lock
instead of the internal trip_mutex and drop the latter which is not
necessary any more.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

It is generally invalid to change the trip point indices after they have
been exposed via sysfs.

Moreover, the thermal objects in the ACPI namespace cannot go away and
appear on the fly.  In practice, the only thing that can happen when the
INT3403_PERF_TRIP_POINT_CHANGED notification is sent by the platform
firmware is a change of the return values of those thermal objects.

For this reason, add a special function for updating the trip point
temperatures after re-evaluating the respective ACPI thermal objects
and change int3403_notify() to invoke it instead of
int340x_thermal_read_trips() that would change the trip point indices
on errors.  Also remove the locking from the latter, because it is only
called before registering the thermal zone and it cannot race with the
zone's callbacks.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

In some cases it is still useful to register a trip point if the
temperature returned by the corresponding ACPI thermal object (for
example, _HOT) is invalid to start with, because the same ACPI
thermal object may start to return a valid temperature after a
system configuration change (for example, from an AC power source
to battery an vice versa).

For this reason, if the ACPI thermal object evaluated by
thermal_acpi_trip_init() successfully returns a temperature value that
is out of the range of values taken into account, initialize the trip
point using THERMAL_TEMP_INVALID as the temperature value instead of
returning an error to allow the user of the trip point to decide what
to do with it.

Also update pch_wpt_add_acpi_psv_trip() to reject trip points with
invalid temperature values.

Fixes: 7a0e3974 ("thermal: ACPI: Add ACPI trip point routines")
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge tag 'thermal-v6.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal-next

Pull thermal control material for 6.3-rc1 from Daniel Lezcano:

"- Fix kerneldoc format errors for Rockchip, Mediatek and Uniphier
   (Randy Dunlap)

 - Add the missing 'qcom,adc-tm7' compatible string in the dt-bindings
   (Krzysztof Kozlowski)

 - Improve the calibration routine by relying on the nvmem to read the
   values and provide a set of fixes for the QCom tsens driver (Dmitry
   Baryshkov)

 - Remove the duplicate interrupt setting routine in the QCom tsens
   driver (Daniel Lezcano)

 - Fix a wrong loop condition in the i.MX SC thermal driver and add the
   iMX8QM sensors (Viorel Suman)

 - Fix header inclusion asm-generic.h by asm.h for the
   qcom-spmi-adc-tm5 driver (Andy Shevchenko)

 - Use the devm_platform_get_and_ioremap_resource() combo function in
   all the drivers where the conversion applies (Ye Xingchen)

 - Replace a literal mask by an existing corresponding macro (Yangtao
   Li)

 - Add support for MT7986 and MT7981 (Daniel Golle)

 - Use thermal_zone_get_crit_temp() for the Armada thermal driver
   (Daniel Lezcano)"

* tag 'thermal-v6.3-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (35 commits)
  thermal/drivers/armada: Use the thermal_zone_get_crit_temp()
  thermal/drivers/mtk: Add support for MT7986 and MT7981
  thermal/drivers/mtk: Use function pointer for raw_to_mcelsius
  thermal/drivers/sun8i: Convert to use macro
  thermal/drivers/spear: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/kirkwood: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/thermal_mmio: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/rockchip: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/mtk_thermal: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/armada: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/dove: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/bcm2835: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/brcmstb_thermal: Use devm_platform_get_and_ioremap_resource()
  thermal/drivers/qcom-spmi-adc-tm5: Use asm intead of asm-generic
  thermal/drivers/imx_sc_thermal: Add iMX8QM sensors
  thermal/drivers/imx_sc_thermal: Fix the loop condition
  thermal/drivers/qcom: Remove duplicate set next trip point interrupt code
  thermal/drivers/tsens: Drop single-cell code for msm8976/msm8956
  thermal/drivers/tsens: Drop single-cell code for msm8939
  thermal/drivers/tsens: Drop single-cell code for mdm9607
  ...