When cleaning up other drm config dependencies, it is too easy to create
larger problems. Instead, mark CONFIG_FB as a "depends":

drivers/gpu/drm/Kconfig:74:error: recursive dependency detected!
Suggested-by: Arnd Bergmann <arnd@kernel.org>
Link: https://lore.kernel.org/lkml/CAK8P3a3jUQs6c5tESSNMbqfuymewj9FhqRizyHcfOXf8Rgy-nA@mail.gmail.com/Signed-off-by: Kees Cook <keescook@chromium.org>
[danvet: Rebase, the symbol has changed.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602215252.695994-2-keescook@chromium.org

Use DEVICE_ATTR_RO helper instead of plain DEVICE_ATTR, which makes the
code a bit shorter and easier to read.
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210601090852.10531-1-thunder.leizhen@huawei.com

deleted the repeated word 'be' in the comments.
Signed-off-by: lijian <lijian@yulong.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210601012747.38884-1-lijian_8010a29@163.com

The hang_limit is the threshold after which the kernel no longer
attempts to schedule a job. Its documentation stated the opposite due to
a typo. Correct the wording to indicate the actual purpose of the field.
Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528235152.38447-1-alyssa.rosenzweig@collabora.com

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/vgem/vgem_drv.c:47: warning: expecting prototype for This is vgem, a (non-hardware(). Prototype was for DRIVER_NAME() instead

Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Adam Jackson <ajax@redhat.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526084726.552052-31-lee.jones@linaro.org

We have this nice kerneldoc, but forgot to include it.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Link: https://patchwork.freedesktop.org/patch/msgid/20210521082457.1656333-1-daniel.vetter@ffwll.ch

When we want to decouble resource management from buffer management we need to
be able to handle resources separately.

Add a resource pointer and rename bo->mem so that all code needs to
change to access the pointer instead.

No functional change.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430092508.60710-4-christian.koenig@amd.com

The backing memory does not necessarily have the writecombine attribute
set, since commit cf8ccbc7 ("drm: Add support for GEM buffers backed
by non-coherent memory").

Fixes: cf8ccbc7 ("drm: Add support for GEM buffers backed by non-coherent memory")
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210601095405.8975-1-paul@crapouillou.net

The kernel versions including the following commits are referenced:

DRM_CLIENT_CAP_STEREO_3D
61d8e328 ("drm: Add a STEREO_3D capability to the SET_CLIENT_CAP ioctl")

DRM_CLIENT_CAP_UNIVERSAL_PLANES
681e7ec7 ("drm: Allow userspace to ask for universal plane list (v2)")
c7dbc6c9 ("drm: Remove command line guard for universal planes")

DRM_CLIENT_CAP_ATOMIC
88a48e29 ("drm: add atomic properties")
8b72ce15 ("drm: Always enable atomic API")

DRM_CLIENT_CAP_ASPECT_RATIO
7595bda2 ("drm: Add DRM client cap for aspect-ratio")

DRM_CLIENT_CAP_WRITEBACK_CONNECTORS
d67b6a20 ("drm: writeback: Add client capability for exposing writeback connectors")
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434202/

Make it clear that the client is responsible for enabling ATOMIC
prior to enabling WRITEBACK_CONNECTORS. Linkify the reference to
ATOMIC.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434200/

In the docs for DRM_CLIENT_CAP_STEREO_3D and
DRM_CLIENT_CAP_ASPECT_RATIO, reference the DRM_MODE_FLAG_* defines
that get set when the cap is enabled.
Signed-off-by: Simon Ser <contact@emersion.fr>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Link: https://patchwork.freedesktop.org/patch/434201/

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210531135622.3348252-1-yukuai3@huawei.com

The Lontium bridge is including legacy header files for GPIO
but not using them. Delete the includes.

Cc: Adrien Grassein <adrien.grassein@gmail.com>
Cc: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Adren Grassein <adrien.grassein@gmail.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210529002759.468964-1-linus.walleij@linaro.org

To reduce memory various Rockchip VOP versions share
common reg structures. However more recent added SoCs not
always have to same futures as the old ones.
Add PX30 missing version info, so all VOP version checks
work correct if needed in the future.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210131125016.10837-1-jbx6244@gmail.com

The variable bit_per_pix is a u8 and is promoted in the multiplication
to an int type and then sign extended to a u64. If the result of the
int multiplication is greater than 0x7fffffff then the upper 32 bits will
be set to 1 as a result of the sign extension. Avoid this by casting
tu_size_reg to u64 to avoid sign extension and also a potential overflow.

Fixes: 1a0f7ed3 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200915162049.36434-1-colin.king@canonical.com

'ret' is know to be 0 a this point. Checking the return value of
'phy_init()' and 'phy_set_mode()' was intended instead.

So add the missing assignments.

Fixes: cca1705c ("drm/rockchip: lvds: Add PX30 support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/248220d4815dc8c8088cebfab7d6df5f70518438.1619881852.git.christophe.jaillet@wanadoo.fr

Fix the following clang warning:

drivers/gpu/drm/rockchip/dw-mipi-dsi-rockchip.c:320:20: warning: unused
function 'dsi_set' [-Wunused-function].
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1618476421-114429-1-git-send-email-jiapeng.chong@linux.alibaba.com

commit cf6d100d ("drm/rockchip: dsi: add dual mipi support") added
this devcnt field and call to component_del(). However, these both
appear to be erroneous changes left over from an earlier version of the
patch. In the version merged, nothing ever modifies devcnt, meaning
component_del() runs unconditionally and in addition to the
component_del() calls in dw_mipi_dsi_rockchip_host_detach(). The second
call fails to delete anything and produces a warning in dmesg.

If we look at the previous version of the patch[1], however, we see that
it had logic to calculate devcnt and call component_add() in certain
situations. This was removed in v6, and the fact that the deletion code
was not appears to have been an oversight.

[1] https://patchwork.kernel.org/project/dri-devel/patch/20180821140515.22246-8-heiko@sntech.de/

Fixes: cf6d100d ("drm/rockchip: dsi: add dual mipi support")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/201385acb0eeb5dfb037afdc6a94bfbcdab97f99.1618797778.git.tommyhebb@gmail.com

When we first enable the DSI encoder, we currently program some per-chip
configuration that we look up in rk3399_chip_data based on the device
tree compatible we match. This data configures various parameters of the
MIPI lanes, including on RK3399 whether DSI1 is slaved to DSI0 in a
dual-mode configuration. It also selects which LCDC (i.e. VOP) to scan
out from.

This causes a problem in RK3399 dual-mode configurations, though: panel
prepare() callbacks run before the encoder gets enabled and expect to be
able to write commands to the DSI bus, but the bus isn't fully
functional until the lane and master/slave configuration have been
programmed. As a result, dual-mode panels (and possibly others too) fail
to turn on when the rockchipdrm driver is initially loaded.

Because the LCDC mux is the only thing we don't know until enable time
(and is the only thing that can ever change), we can actually move most
of the initialization to bind() and get it out of the way early. That's
what this change does. (Rockchip's 4.4 BSP kernel does it in mode_set(),
which also avoids the issue, but bind() seems like the more correct
place to me.)

Tested on a Google Scarlet board (Acer Chromebook Tab 10), which has a
Kingdisplay KD097D04 dual-mode panel. Prior to this change, the panel's
backlight would turn on but no image would appear when initially loading
rockchipdrm. If I kept rockchipdrm loaded and reloaded the panel driver,
it would come on. With this change, the panel successfully turns on
during initial rockchipdrm load as expected.

Fixes: 2d4f7bda ("drm/rockchip: dsi: migrate to use dw-mipi-dsi bridge driver")
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Tested-by: Jonathan Liu <net147@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/55fe7f3454d8c91dc3837ba5aa741d4a0e67378f.1618797813.git.tommyhebb@gmail.com

The CDP DP component of the rockchip GPU driver requires firmware
so define MODULE_FIRMWARE for rockchip/dptx.bin so the details
are available in the module info.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210506092951.515813-1-pbrobinson@gmail.com

After calling clk_prepare_enable(), clk_disable_unprepare() need
be called when calling regmap_write() failed.

Fixes: 1a0f7ed3 ("drm/rockchip: cdn-dp: add cdn DP support for rk3399")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210519134928.2696617-1-yangyingliang@huawei.com

alpha_en should be set to 0 if it is not used, i.e. to disable alpha
blending if it was enabled before and should be disabled now.

Fixes: 2aae8ed1 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-6-knaerzche@gmail.com

With
commit 2aae8ed1 ("drm/rockchip: Add per-pixel alpha support for the PX30 VOP")
alpha support was introduced for PX30's VOP.
RK3036, RK3066, RK3126 and RK3188 VOPs support alpha blending in the
same manner.
With the exception of RK3066 all of them support pre-multiplied alpha.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-5-knaerzche@gmail.com

Add dither_up, dsp_lut_en and data_blank registers to enable their
respective functionality for RK3066's VOP.

While at that also fix .rb_swap and .format registers for all windows,
which have to be set though RK3066_SYS_CTRL1 register.
Also remove .scl from win1: Scaling is only supported on the primary
plane.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-4-knaerzche@gmail.com

Add dither_up, dsp_lut_en and data_blank registers to enable their
respective functionality for RK3188's VOP.
While at that also fix .dsp_blank register which is (only) set with
BIT24 (same as RK3066)
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-3-knaerzche@gmail.com

Add the registers needed to make scaling work on RK3036's win1.
Signed-off-by: Alex Bee <knaerzche@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210528130554.72191-2-knaerzche@gmail.com

There are drivers that register framebuffer devices very early in the boot
process and make use of the existing framebuffer as setup by the firmware.

If one of those drivers has registered a fbdev, then the fallback fbdev of
the DRM driver won't be bound to the framebuffer console. To avoid that,
remove any existing generic driver and take over the graphics device.

By doing that, the fb mapped to the console is switched correctly from the
early fbdev to the one registered by the rockchip DRM driver:

    [   40.752420] fb0: switching to rockchip-drm-fb from EFI VGA
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516074833.451643-1-javierm@redhat.com

The previous commit wrongly assumed that dma_mmap_wc() could be replaced
by pgprot_writecombine() + dma_mmap_pages(). It did work on my setup,
but did not work everywhere.

Use dma_mmap_wc() when the buffer has the write-combine cache attribute,
and dma_mmap_pages() when it has the non-coherent cache attribute.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Reported-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Fixes: cf8ccbc7 ("drm: Add support for GEM buffers backed by non-coherent memory")
Link: https://patchwork.freedesktop.org/patch/msgid/20210527230334.151947-1-paul@crapouillou.net

[why]
Link rate in kHz is what is eventually required to calculate the link
bandwidth, which makes kHz a more generic unit. This should also make
forward-compatibility with new DP standards easier.

[how]
- Replace 'link rate DPCD code' with 'link rate in kHz' when used with
drm_dp_mst_topology_mgr_init()
- Add/remove related DPCD code conversion from/to kHz where applicable
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210512210011.8425-2-nikola.cornij@amd.com

i915 is broken without -rc3, let's bring that tag in to fix it.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>

The ChromeOS EC ANX7688 bridge is connected to a ChromeOS Embedded
Controller, and is accessed using I2C tunneling through the Embedded
Controller.  Hence add a dependency on I2C_CROS_EC_TUNNEL, to prevent
asking the user about this driver when configuring a kernel without
support for the ChromeOS EC tunnel I2C bus.

Fixes: 44602b10 ("drm/bridge: Add ChromeOS EC ANX7688 bridge driver support")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/d107d1840b83607baee8571cc5d88973fc32b519.1622015323.git.geert+renesas@glider.be

./drivers/gpu/drm/bridge/lontium-lt8912b.c:758:3-8: No need to set .owner here. The core will do it.

 Remove .owner field if calls are used which set it automatically

Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1622109018-54648-1-git-send-email-zou_wei@huawei.com

Eliminate the follow smatch warning:

drivers/gpu/drm/bridge/cadence/cdns-mhdp8546-core.c:2143
cdns_mhdp_bridge_atomic_reset() warn: inconsistent indenting.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1621852953-51325-1-git-send-email-jiapeng.chong@linux.alibaba.com

pm_runtime_get_sync will increment pm usage counter even it failed.
Forgetting to putting operation will result in reference leak here.
Fix it by replacing it with pm_runtime_resume_and_get to keep usage
counter balanced.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1621840862-106024-1-git-send-email-zou_wei@huawei.com

drm/i915 is extremely on fire without the below revert from -rc3:

commit 293837b9
Author: Linus Torvalds <torvalds@linux-foundation.org>
Date:   Wed May 19 05:55:57 2021 -1000

    Revert "i915: fix remap_io_sg to verify the pgprot"

Backmerge so we don't have a too wide bisect window for anything
that's a more involved workload than booting the driver.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

The structure is unused. Remove it.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516121315.30321-5-tzimmermann@suse.de

The %p4cc printk format modifier was recently added to print fourcc codes,
replacing drm_get_format_name(). The function is no longer needed, so
remove it.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516121315.30321-4-tzimmermann@suse.de

Replace use of struct drm_format_name_buf with %p4cc for printing
4CC formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516121315.30321-3-tzimmermann@suse.de

Replace use of struct drm_format_name_buf with %p4cc for printing
4CC formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Christian König <christian.koenig@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210516121315.30321-2-tzimmermann@suse.de

This is one of the last drivers with a global init_module() function
instead of the modern module_init() annotation. Convert it over.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20210514213316.635070-1-arnd@kernel.org