Skip to content

L
linux
Switch branch/tag
  1. 30 Aug, 2022 2 commits
  3. 29 Aug, 2022 3 commits
    • David S. Miller's avatar
      Merge branch 'u64_stats-fixups' · cb10b0f9
      David S. Miller authored 
      Sebastian Andrzej Siewior says:

====================
net: u64_stats fixups for 32bit.

while looking at the u64-stats patch
	https://lore.kernel.org/all/20220817162703.728679-10-bigeasy@linutronix.de

I noticed that u64_stats_fetch_begin() is used. That suspicious thing
about it is that network processing, including stats update, is
performed in NAPI and so I would expect to see
u64_stats_fetch_begin_irq() in order to avoid updates from NAPI during
the read. This is only needed on 32bit-UP where the seqcount is not
used. This is address in 2/2. The remaining user take some kind of
precaution and may use u64_stats_fetch_begin().

I updated the previously mentioned patch to get rid of
u64_stats_fetch_begin_irq(). If this is not considered stable patch
worthy then it can be ignored and considred fixed by the other series
which removes the special 32bit cases.

The xrs700x driver reads and writes the counter from preemptible context
so the only missing piece here is at least disable preemption on the
writer side to avoid preemption while the writer is in progress. The
possible reader would spin then until the writer completes its write
critical section which is considered bad. This is addressed in 1/2 by
using u64_stats_update_begin_irqsave() and so disable interrupts during
the write critical section.
The other closet resemblance I found is mdio_bus.c::mdiobus_stats_acct()
where preemtion is disabled unconditionally. This is something I want to
avoid since it also affects 64bit.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      cb10b0f9
    • Sebastian Andrzej Siewior's avatar
      net: Use u64_stats_fetch_begin_irq() for stats fetch. · 278d3ba6
      Sebastian Andrzej Siewior authored 
      On 32bit-UP u64_stats_fetch_begin() disables only preemption. If the
reader is in preemptible context and the writer side
(u64_stats_update_begin*()) runs in an interrupt context (IRQ or
softirq) then the writer can update the stats during the read operation.
This update remains undetected.

Use u64_stats_fetch_begin_irq() to ensure the stats fetch on 32bit-UP
are not interrupted by a writer. 32bit-SMP remains unaffected by this
change.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Catherine Sullivan <csully@google.com>
Cc: David Awogbemila <awogbemila@google.com>
Cc: Dimitris Michailidis <dmichail@fungible.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Hans Ulli Kroll <ulli.kroll@googlemail.com>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Jeroen de Borst <jeroendb@google.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Simon Horman <simon.horman@corigine.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: oss-drivers@corigine.com
Cc: stable@vger.kernel.org
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: default avatarSimon Horman <simon.horman@corigine.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      278d3ba6
    • Sebastian Andrzej Siewior's avatar
      net: dsa: xrs700x: Use irqsave variant for u64 stats update · 3f8ae9fe
      Sebastian Andrzej Siewior authored 
      xrs700x_read_port_counters() updates the stats from a worker using the
u64_stats_update_begin() version. This is okay on 32-UP since on the
reader side preemption is disabled.
On 32bit-SMP the writer can be preempted by the reader at which point
the reader will spin on the seqcount until writer continues and
completes the update.

Assigning the mib_mutex mutex to the underlying seqcount would ensure
proper synchronisation. The API for that on the u64_stats_init() side
isn't available. Since it is the only user, just use disable interrupts
during the update.

Use u64_stats_update_begin_irqsave() on the writer side to ensure an
uninterrupted update.

Fixes: ee00b24f ("net: dsa: add Arrow SpeedChips XRS700x driver")
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: George McCollister <george.mccollister@gmail.com>
Cc: Vivien Didelot <vivien.didelot@gmail.com>
Cc: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: default avatarSebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: default avatarGeorge McCollister <george.mccollister@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3f8ae9fe
  5. 27 Aug, 2022 7 commits
  7. 26 Aug, 2022 2 commits
    • David S. Miller's avatar
      Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf · 2e085ec0
      David S. Miller authored 
      Daniel borkmann says:

====================
The following pull-request contains BPF updates for your *net* tree.

We've added 11 non-merge commits during the last 14 day(s) which contain
a total of 13 files changed, 61 insertions(+), 24 deletions(-).

The main changes are:

1) Fix BPF verifier's precision tracking around BPF ring buffer, from Kumar Kartikeya Dwivedi.

2) Fix regression in tunnel key infra when passing FLOWI_FLAG_ANYSRC, from Eyal Birger.

3) Fix insufficient permissions for bpf_sys_bpf() helper, from YiFei Zhu.

4) Fix splat from hitting BUG when purging effective cgroup programs, from Pu Lehui.

5) Fix range tracking for array poke descriptors, from Daniel Borkmann.

6) Fix corrupted packets for XDP_SHARED_UMEM in aligned mode, from Magnus Karlsson.

7) Fix NULL pointer splat in BPF sockmap sk_msg_recvmsg(), from Liu Jian.

8) Add READ_ONCE() to bpf_jit_limit when reading from sysctl, from Kuniyuki Iwashima.

9) Add BPF selftest lru_bug check to s390x deny list, from Daniel Müller.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2e085ec0
    • David S. Miller's avatar
      Merge tag 'wireless-2022-08-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless · 4ba9d38b
      David S. Miller authored 
      Johannes Berg says:

====================
pull-request: wireless-2022-08-26

Here are a couple of fixes for the current cycle,
see the tag description below.

Just a couple of fixes:
 * two potential leaks
 * use-after-free in certain scan races
 * warning in IBSS code
 * error return from a debugfs file was wrong
 * possible NULL-ptr-deref when station lookup fails

Please pull and let me know if there's any problem.
====================
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      4ba9d38b
  9. 25 Aug, 2022 26 commits
    • Zhengping Jiang's avatar
      Bluetooth: hci_sync: hold hdev->lock when cleanup hci_conn · 2da8eb83
      Zhengping Jiang authored 
      When disconnecting all devices, hci_conn_failed is used to cleanup
hci_conn object when the hci_conn object cannot be aborted.
The function hci_conn_failed requires the caller holds hdev->lock.

Fixes: 9b3628d7 ("Bluetooth: hci_sync: Cleanup hci_conn if it cannot be aborted")
Signed-off-by: default avatarZhengping Jiang <jiangzp@google.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      2da8eb83
    • Wolfram Sang's avatar
      Bluetooth: move from strlcpy with unused retval to strscpy · cb0d160f
      Wolfram Sang authored 
      Follow the advice of the below link and prefer 'strscpy' in this
subsystem. Conversion is 1:1 because the return value is not used.
Generated by a coccinelle script.

Link: https://lore.kernel.org/r/CAHk-=wgfRnXz0W3D37d01q3JFkr_i_uTL=V6A6G1oUZcprmknw@mail.gmail.com/Signed-off-by: default avatarWolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      cb0d160f
    • Archie Pusaka's avatar
      Bluetooth: hci_event: Fix checking conn for le_conn_complete_evt · f48735a9
      Archie Pusaka authored 
      To prevent multiple conn complete events, we shouldn't look up the
conn with hci_lookup_le_connect, since it requires the state to be
BT_CONNECT. By the time the duplicate event is processed, the state
might have changed, so we end up processing the new event anyway.

Change the lookup function to hci_conn_hash_lookup_ba.

Fixes: d5ebaa7c ("Bluetooth: hci_event: Ignore multiple conn complete events")
Signed-off-by: default avatarArchie Pusaka <apusaka@chromium.org>
Reviewed-by: default avatarSonny Sasaka <sonnysasaka@chromium.org>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      f48735a9
    • Luiz Augusto von Dentz's avatar
      Bluetooth: ISO: Fix not handling shutdown condition · c5729093
      Luiz Augusto von Dentz authored 
      In order to properly handle shutdown syscall the code shall not assume
that the how argument is always SHUT_RDWR resulting in SHUTDOWN_MASK as
that would result in poll to immediately report EPOLLHUP instead of
properly waiting for disconnect_cfm (Disconnect Complete) which is
rather important for the likes of BAP as the CIG may need to be
reprogrammed.

Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      c5729093
    • Tetsuo Handa's avatar
      Bluetooth: hci_sync: fix double mgmt_pending_free() in remove_adv_monitor() · 3cfbc6ac
      Tetsuo Handa authored 
      syzbot is reporting double kfree() at remove_adv_monitor() [1], for
commit 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv
Monitor") forgot to remove duplicated mgmt_pending_remove() when
merging "if (err) {" path and "if (!pending) {" path.

Link: https://syzkaller.appspot.com/bug?extid=915a8416bf15895b8e07 [1]
Reported-by: default avatarsyzbot <syzbot+915a8416bf15895b8e07@syzkaller.appspotmail.com>
Fixes: 7cf5c297 ("Bluetooth: hci_sync: Refactor remove Adv Monitor")
Signed-off-by: default avatarTetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      3cfbc6ac
    • Luiz Augusto von Dentz's avatar
      Bluetooth: MGMT: Fix Get Device Flags · 23b72814
      Luiz Augusto von Dentz authored 
      Get Device Flags don't check if device does actually use an RPA in which
case it shall only set HCI_CONN_FLAG_REMOTE_WAKEUP if LL Privacy is
enabled.
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      23b72814
    • Luiz Augusto von Dentz's avatar
      Bluetooth: L2CAP: Fix build errors in some archs · b840304f
      Luiz Augusto von Dentz authored 
      This attempts to fix the follow errors:

In function 'memcmp',
    inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9,
    inlined from 'l2cap_global_chan_by_psm' at
    net/bluetooth/l2cap_core.c:2003:15:
./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp'
specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
   44 | #define __underlying_memcmp     __builtin_memcmp
      |                                 ^
./include/linux/fortify-string.h:420:16: note: in expansion of macro
'__underlying_memcmp'
  420 |         return __underlying_memcmp(p, q, size);
      |                ^~~~~~~~~~~~~~~~~~~
In function 'memcmp',
    inlined from 'bacmp' at ./include/net/bluetooth/bluetooth.h:347:9,
    inlined from 'l2cap_global_chan_by_psm' at
    net/bluetooth/l2cap_core.c:2004:15:
./include/linux/fortify-string.h:44:33: error: '__builtin_memcmp'
specified bound 6 exceeds source size 0 [-Werror=stringop-overread]
   44 | #define __underlying_memcmp     __builtin_memcmp
      |                                 ^
./include/linux/fortify-string.h:420:16: note: in expansion of macro
'__underlying_memcmp'
  420 |         return __underlying_memcmp(p, q, size);
      |                ^~~~~~~~~~~~~~~~~~~

Fixes: 332f1795 ("Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      b840304f
    • Luiz Augusto von Dentz's avatar
      Bluetooth: hci_sync: Fix suspend performance regression · 1fd02d56
      Luiz Augusto von Dentz authored 
      This attempts to fix suspend performance when there is no connections by
not updating the event mask.

Fixes: ef61b6ea ("Bluetooth: Always set event mask on suspend")
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      1fd02d56
    • Hans de Goede's avatar
      Bluetooth: hci_event: Fix vendor (unknown) opcode status handling · b82a26d8
      Hans de Goede authored 
      Commit c8992cff ("Bluetooth: hci_event: Use of a function table to
handle Command Complete") was (presumably) meant to only refactor things
without any functional changes.

But it does have one undesirable side-effect, before *status would always
be set to skb->data[0] and it might be overridden by some of the opcode
specific handling. While now it always set by the opcode specific handlers.
This means that if the opcode is not known *status does not get set any
more at all!

This behavior change has broken bluetooth support for BCM4343A0 HCIs,
the hci_bcm.c code tries to configure UART attached HCIs at a higher
baudraute using vendor specific opcodes. The BCM4343A0 does not
support this and this used to simply fail:

[   25.646442] Bluetooth: hci0: BCM: failed to write clock (-56)
[   25.646481] Bluetooth: hci0: Failed to set baudrate

After which things would continue with the initial baudraute. But now
that hci_cmd_complete_evt() no longer sets status for unknown opcodes
*status is left at 0. This causes the hci_bcm.c code to think the baudraute
has been changed on the HCI side and to also adjust the UART baudrate,
after which communication with the HCI is broken, leading to:

[   28.579042] Bluetooth: hci0: command 0x0c03 tx timeout
[   36.961601] Bluetooth: hci0: BCM: Reset failed (-110)

And non working bluetooth. Fix this by restoring the previous
default "*status = skb->data[0]" handling for unknown opcodes.

Fixes: c8992cff ("Bluetooth: hci_event: Use of a function table to handle Command Complete")
Signed-off-by: default avatarHans de Goede <hdegoede@redhat.com>
Signed-off-by: default avatarLuiz Augusto von Dentz <luiz.von.dentz@intel.com>
      b82a26d8
    • Daniel Borkmann's avatar
      bpf: Don't use tnum_range on array range checking for poke descriptors · a657182a
      Daniel Borkmann authored 
      Hsin-Wei reported a KASAN splat triggered by their BPF runtime fuzzer which
is based on a customized syzkaller:

  BUG: KASAN: slab-out-of-bounds in bpf_int_jit_compile+0x1257/0x13f0
  Read of size 8 at addr ffff888004e90b58 by task syz-executor.0/1489
  CPU: 1 PID: 1489 Comm: syz-executor.0 Not tainted 5.19.0 #1
  Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
  1.13.0-1ubuntu1.1 04/01/2014
  Call Trace:
   <TASK>
   dump_stack_lvl+0x9c/0xc9
   print_address_description.constprop.0+0x1f/0x1f0
   ? bpf_int_jit_compile+0x1257/0x13f0
   kasan_report.cold+0xeb/0x197
   ? kvmalloc_node+0x170/0x200
   ? bpf_int_jit_compile+0x1257/0x13f0
   bpf_int_jit_compile+0x1257/0x13f0
   ? arch_prepare_bpf_dispatcher+0xd0/0xd0
   ? rcu_read_lock_sched_held+0x43/0x70
   bpf_prog_select_runtime+0x3e8/0x640
   ? bpf_obj_name_cpy+0x149/0x1b0
   bpf_prog_load+0x102f/0x2220
   ? __bpf_prog_put.constprop.0+0x220/0x220
   ? find_held_lock+0x2c/0x110
   ? __might_fault+0xd6/0x180
   ? lock_downgrade+0x6e0/0x6e0
   ? lock_is_held_type+0xa6/0x120
   ? __might_fault+0x147/0x180
   __sys_bpf+0x137b/0x6070
   ? bpf_perf_link_attach+0x530/0x530
   ? new_sync_read+0x600/0x600
   ? __fget_files+0x255/0x450
   ? lock_downgrade+0x6e0/0x6e0
   ? fput+0x30/0x1a0
   ? ksys_write+0x1a8/0x260
   __x64_sys_bpf+0x7a/0xc0
   ? syscall_enter_from_user_mode+0x21/0x70
   do_syscall_64+0x3b/0x90
   entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7f917c4e2c2d

The problem here is that a range of tnum_range(0, map->max_entries - 1) has
limited ability to represent the concrete tight range with the tnum as the
set of resulting states from value + mask can result in a superset of the
actual intended range, and as such a tnum_in(range, reg->var_off) check may
yield true when it shouldn't, for example tnum_range(0, 2) would result in
00XX -> v = 0000, m = 0011 such that the intended set of {0, 1, 2} is here
represented by a less precise superset of {0, 1, 2, 3}. As the register is
known const scalar, really just use the concrete reg->var_off.value for the
upper index check.

Fixes: d2e4c1e6 ("bpf: Constant map key tracking for prog array pokes")
Reported-by: default avatarHsin-Wei Hung <hsinweih@uci.edu>
Signed-off-by: default avatarDaniel Borkmann <daniel@iogearbox.net>
Cc: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Acked-by: default avatarJohn Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/r/984b37f9fdf7ac36831d2137415a4a915744c1b6.1661462653.git.daniel@iogearbox.netSigned-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      a657182a
    • Linus Torvalds's avatar
      Merge tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net · 4c612826
      Linus Torvalds authored 
      Pull networking fixes from Jakub Kicinski:
 "Including fixes from ipsec and netfilter (with one broken Fixes tag).

  Current release - new code bugs:

   - dsa: don't dereference NULL extack in dsa_slave_changeupper()

   - dpaa: fix <1G ethernet on LS1046ARDB

   - neigh: don't call kfree_skb() under spin_lock_irqsave()

  Previous releases - regressions:

   - r8152: fix the RX FIFO settings when suspending

   - dsa: microchip: keep compatibility with device tree blobs with no
     phy-mode

   - Revert "net: macsec: update SCI upon MAC address change."

   - Revert "xfrm: update SA curlft.use_time", comply with RFC 2367

  Previous releases - always broken:

   - netfilter: conntrack: work around exceeded TCP receive window

   - ipsec: fix a null pointer dereference of dst->dev on a metadata dst
     in xfrm_lookup_with_ifid

   - moxa: get rid of asymmetry in DMA mapping/unmapping

   - dsa: microchip: make learning configurable and keep it off while
     standalone

   - ice: xsk: prohibit usage of non-balanced queue id

   - rxrpc: fix locking in rxrpc's sendmsg

  Misc:

   - another chunk of sysctl data race silencing"

* tag 'net-6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (87 commits)
  net: lantiq_xrx200: restore buffer if memory allocation failed
  net: lantiq_xrx200: fix lock under memory pressure
  net: lantiq_xrx200: confirm skb is allocated before using
  net: stmmac: work around sporadic tx issue on link-up
  ionic: VF initial random MAC address if no assigned mac
  ionic: fix up issues with handling EAGAIN on FW cmds
  ionic: clear broken state on generation change
  rxrpc: Fix locking in rxrpc's sendmsg
  net: ethernet: mtk_eth_soc: fix hw hash reporting for MTK_NETSYS_V2
  MAINTAINERS: rectify file entry in BONDING DRIVER
  i40e: Fix incorrect address type for IPv6 flow rules
  ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
  net: Fix a data-race around sysctl_somaxconn.
  net: Fix a data-race around netdev_unregister_timeout_secs.
  net: Fix a data-race around gro_normal_batch.
  net: Fix data-races around sysctl_devconf_inherit_init_net.
  net: Fix data-races around sysctl_fb_tunnels_only_for_init_net.
  net: Fix a data-race around netdev_budget_usecs.
  net: Fix data-races around sysctl_max_skb_frags.
  net: Fix a data-race around netdev_budget.
  ...
      4c612826
    • Jakub Kicinski's avatar
      Merge branch 'net-lantiq_xrx200-fix-errors-under-memory-pressure' · d974730c
      Jakub Kicinski authored 
      Aleksander Jan Bajkowski says:

====================
net: lantiq_xrx200: fix errors under memory pressure

This series fixes issues that can occur in the driver under memory pressure.
Situations when the system cannot allocate memory are rare, so the mentioned
bugs have been fixed recently. The patches have been tested on a BT Home
router with the Lantiq xRX200 chipset.

Changelog:
  v3: - removed netdev_err() log from the first patch
  v2:
   - the second patch has been changed, so that under memory pressure situation
     the driver will not receive packets indefinitely regardless of the NAPI budget,
   - the third patch has been added.
====================

Link: https://lore.kernel.org/r/20220824215408.4695-1-olek2@wp.plSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      d974730c
    • Aleksander Jan Bajkowski's avatar
      net: lantiq_xrx200: restore buffer if memory allocation failed · c9c3b177
      Aleksander Jan Bajkowski authored 
      In a situation where memory allocation fails, an invalid buffer address
is stored. When this descriptor is used again, the system panics in the
build_skb() function when accessing memory.

Fixes: 7ea6cd16 ("lantiq: net: fix duplicated skb in rx descriptor ring")
Signed-off-by: default avatarAleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c9c3b177
    • Aleksander Jan Bajkowski's avatar
      net: lantiq_xrx200: fix lock under memory pressure · c4b6e934
      Aleksander Jan Bajkowski authored 
      When the xrx200_hw_receive() function returns -ENOMEM, the NAPI poll
function immediately returns an error.
This is incorrect for two reasons:
* the function terminates without enabling interrupts or scheduling NAPI,
* the error code (-ENOMEM) is returned instead of the number of received
packets.

After the first memory allocation failure occurs, packet reception is
locked due to disabled interrupts from DMA..

Fixes: fe1a5642 ("net: lantiq: Add Lantiq / Intel VRX200 Ethernet driver")
Signed-off-by: default avatarAleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c4b6e934
    • Aleksander Jan Bajkowski's avatar
      net: lantiq_xrx200: confirm skb is allocated before using · c8b04370
      Aleksander Jan Bajkowski authored 
      xrx200_hw_receive() assumes build_skb() always works and goes straight
to skb_reserve(). However, build_skb() can fail under memory pressure.

Add a check in case build_skb() failed to allocate and return NULL.

Fixes: e0155935 ("net: lantiq_xrx200: convert to build_skb")
Reported-by: default avatarEric Dumazet <edumazet@google.com>
Signed-off-by: default avatarAleksander Jan Bajkowski <olek2@wp.pl>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      c8b04370
    • Heiner Kallweit's avatar
      net: stmmac: work around sporadic tx issue on link-up · a3a57bf0
      Heiner Kallweit authored 
      This is a follow-up to the discussion in [0]. It seems to me that
at least the IP version used on Amlogic SoC's sometimes has a problem
if register MAC_CTRL_REG is written whilst the chip is still processing
a previous write. But that's just a guess.
Adding a delay between two writes to this register helps, but we can
also simply omit the offending second write. This patch uses the second
approach and is based on a suggestion from Qi Duan.
Benefit of this approach is that we can save few register writes, also
on not affected chip versions.

[0] https://www.spinics.net/lists/netdev/msg831526.html

Fixes: bfab27a1 ("stmmac: add the experimental PCI support")
Suggested-by: default avatarQi Duan <qi.duan@amlogic.com>
Suggested-by: default avatarJerome Brunet <jbrunet@baylibre.com>
Signed-off-by: default avatarHeiner Kallweit <hkallweit1@gmail.com>
Link: https://lore.kernel.org/r/e99857ce-bd90-5093-ca8c-8cd480b5a0a2@gmail.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      a3a57bf0
    • Jakub Kicinski's avatar
      Merge branch '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue · ef332fe1
      Jakub Kicinski authored 
      Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2022-08-24 (ixgbe, i40e)

This series contains updates to ixgbe and i40e drivers.

Jake stops incorrect resetting of SYSTIME registers when starting
cyclecounter for ixgbe.

Sylwester corrects a check on source IP address when validating destination
for i40e.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: Fix incorrect address type for IPv6 flow rules
  ixgbe: stop resetting SYSTIME in ixgbe_ptp_start_cyclecounter
====================

Link: https://lore.kernel.org/r/20220824193748.874343-1-anthony.l.nguyen@intel.comSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      ef332fe1
    • Jakub Kicinski's avatar
      Merge branch 'ionic-bug-fixes' · 92df825a
      Jakub Kicinski authored 
      Shannon Nelson says:

====================
ionic: bug fixes

These are a couple of maintenance bug fixes for the Pensando ionic
networking driver.

Mohamed takes care of a "plays well with others" issue where the
VF spec is a bit vague on VF mac addresses, but certain customers
have come to expect behavior based on other vendor drivers.

Shannon addresses a couple of corner cases seen in internal
stress testing.
====================

Link: https://lore.kernel.org/r/20220824165051.6185-1-snelson@pensando.ioSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      92df825a
    • R Mohamed Shah's avatar
      ionic: VF initial random MAC address if no assigned mac · 19058be7
      R Mohamed Shah authored 
      Assign a random mac address to the VF interface station
address if it boots with a zero mac address in order to match
similar behavior seen in other VF drivers.  Handle the errors
where the older firmware does not allow the VF to set its own
station address.

Newer firmware will allow the VF to set the station mac address
if it hasn't already been set administratively through the PF.
Setting it will also be allowed if the VF has trust.

Fixes: fbb39807 ("ionic: support sr-iov operations")
Signed-off-by: default avatarR Mohamed Shah <mohamed@pensando.io>
Signed-off-by: default avatarShannon Nelson <snelson@pensando.io>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      19058be7
    • Shannon Nelson's avatar
      ionic: fix up issues with handling EAGAIN on FW cmds · 0fc4dd45
      Shannon Nelson authored 
      In looping on FW update tests we occasionally see the
FW_ACTIVATE_STATUS command fail while it is in its EAGAIN loop
waiting for the FW activate step to finsh inside the FW.  The
firmware is complaining that the done bit is set when a new
dev_cmd is going to be processed.

Doing a clean on the cmd registers and doorbell before exiting
the wait-for-done and cleaning the done bit before the sleep
prevents this from occurring.

Fixes: fbfb8031 ("ionic: Add hardware init and device commands")
Signed-off-by: default avatarShannon Nelson <snelson@pensando.io>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      0fc4dd45
    • Shannon Nelson's avatar
      ionic: clear broken state on generation change · 9cb9dadb
      Shannon Nelson authored 
      There is a case found in heavy testing where a link flap happens just
before a firmware Recovery event and the driver gets stuck in the
BROKEN state.  This comes from the driver getting interrupted by a FW
generation change when coming back up from the link flap, and the call
to ionic_start_queues() in ionic_link_status_check() fails.  This can be
addressed by having the fw_up code clear the BROKEN bit if seen, rather
than waiting for a user to manually force the interface down and then
back up.

Fixes: 9e8eaf84 ("ionic: stop watchdog when in broken state")
Signed-off-by: default avatarShannon Nelson <snelson@pensando.io>
Signed-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      9cb9dadb
    • David Howells's avatar
      rxrpc: Fix locking in rxrpc's sendmsg · b0f571ec
      David Howells authored 
      Fix three bugs in the rxrpc's sendmsg implementation:

 (1) rxrpc_new_client_call() should release the socket lock when returning
     an error from rxrpc_get_call_slot().

 (2) rxrpc_wait_for_tx_window_intr() will return without the call mutex
     held in the event that we're interrupted by a signal whilst waiting
     for tx space on the socket or relocking the call mutex afterwards.

     Fix this by: (a) moving the unlock/lock of the call mutex up to
     rxrpc_send_data() such that the lock is not held around all of
     rxrpc_wait_for_tx_window*() and (b) indicating to higher callers
     whether we're return with the lock dropped.  Note that this means
     recvmsg() will not block on this call whilst we're waiting.

 (3) After dropping and regaining the call mutex, rxrpc_send_data() needs
     to go and recheck the state of the tx_pending buffer and the
     tx_total_len check in case we raced with another sendmsg() on the same
     call.

Thinking on this some more, it might make sense to have different locks for
sendmsg() and recvmsg().  There's probably no need to make recvmsg() wait
for sendmsg().  It does mean that recvmsg() can return MSG_EOR indicating
that a call is dead before a sendmsg() to that call returns - but that can
currently happen anyway.

Without fix (2), something like the following can be induced:

	WARNING: bad unlock balance detected!
	5.16.0-rc6-syzkaller #0 Not tainted
	-------------------------------------
	syz-executor011/3597 is trying to release lock (&call->user_mutex) at:
	[<ffffffff885163a3>] rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
	but there are no more locks to release!

	other info that might help us debug this:
	no locks held by syz-executor011/3597.
	...
	Call Trace:
	 <TASK>
	 __dump_stack lib/dump_stack.c:88 [inline]
	 dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
	 print_unlock_imbalance_bug include/trace/events/lock.h:58 [inline]
	 __lock_release kernel/locking/lockdep.c:5306 [inline]
	 lock_release.cold+0x49/0x4e kernel/locking/lockdep.c:5657
	 __mutex_unlock_slowpath+0x99/0x5e0 kernel/locking/mutex.c:900
	 rxrpc_do_sendmsg+0xc13/0x1350 net/rxrpc/sendmsg.c:748
	 rxrpc_sendmsg+0x420/0x630 net/rxrpc/af_rxrpc.c:561
	 sock_sendmsg_nosec net/socket.c:704 [inline]
	 sock_sendmsg+0xcf/0x120 net/socket.c:724
	 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2409
	 ___sys_sendmsg+0xf3/0x170 net/socket.c:2463
	 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2492
	 do_syscall_x64 arch/x86/entry/common.c:50 [inline]
	 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
	 entry_SYSCALL_64_after_hwframe+0x44/0xae

[Thanks to Hawkins Jiawei and Khalid Masum for their attempts to fix this]

Fixes: bc5e3a54 ("rxrpc: Use MSG_WAITALL to tell sendmsg() to temporarily ignore signals")
Reported-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
Reviewed-by: default avatarMarc Dionne <marc.dionne@auristor.com>
Tested-by: syzbot+7f0483225d0c94cb3441@syzkaller.appspotmail.com
cc: Hawkins Jiawei <yin31149@gmail.com>
cc: Khalid Masum <khalid.masum.92@gmail.com>
cc: Dan Carpenter <dan.carpenter@oracle.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/166135894583.600315.7170979436768124075.stgit@warthog.procyon.org.ukSigned-off-by: default avatarJakub Kicinski <kuba@kernel.org>
      b0f571ec
    • Alexei Starovoitov's avatar
      Merge branch 'Fix incorrect pruning for ARG_CONST_ALLOC_SIZE_OR_ZERO' · cb15c734
      Alexei Starovoitov authored 
      Kumar Kartikeya Dwivedi says:

====================

A fix for a missing mark_chain_precision call that leads to eager pruning and
loading of invalid programs when the more permissive case is in the straight
line exploration. Please see the commit log for details, and selftest for an
example.
====================
Acked-by: default avatarAndrii Nakryiko <andrii@kernel.org>
Signed-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      cb15c734
    • Kumar Kartikeya Dwivedi's avatar
      selftests/bpf: Add regression test for pruning fix · 1800b2ac
      Kumar Kartikeya Dwivedi authored 
      Add a test to ensure we do mark_chain_precision for the argument type
ARG_CONST_ALLOC_SIZE_OR_ZERO. For other argument types, this was already
done, but propagation for missing for this case. Without the fix, this
test case loads successfully.
Signed-off-by: default avatarKumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823185500.467-1-memxor@gmail.comSigned-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      1800b2ac
    • Kumar Kartikeya Dwivedi's avatar
      bpf: Do mark_chain_precision for ARG_CONST_ALLOC_SIZE_OR_ZERO · 2fc31465
      Kumar Kartikeya Dwivedi authored 
      Precision markers need to be propagated whenever we have an ARG_CONST_*
style argument, as the verifier cannot consider imprecise scalars to be
equivalent for the purposes of states_equal check when such arguments
refine the return value (in this case, set mem_size for PTR_TO_MEM). The
resultant mem_size for the R0 is derived from the constant value, and if
the verifier incorrectly prunes states considering them equivalent where
such arguments exist (by seeing that both registers have reg->precise as
false in regsafe), we can end up with invalid programs passing the
verifier which can do access beyond what should have been the correct
mem_size in that explored state.

To show a concrete example of the problem:

0000000000000000 <prog>:
       0:       r2 = *(u32 *)(r1 + 80)
       1:       r1 = *(u32 *)(r1 + 76)
       2:       r3 = r1
       3:       r3 += 4
       4:       if r3 > r2 goto +18 <LBB5_5>
       5:       w2 = 0
       6:       *(u32 *)(r1 + 0) = r2
       7:       r1 = *(u32 *)(r1 + 0)
       8:       r2 = 1
       9:       if w1 == 0 goto +1 <LBB5_3>
      10:       r2 = -1

0000000000000058 <LBB5_3>:
      11:       r1 = 0 ll
      13:       r3 = 0
      14:       call bpf_ringbuf_reserve
      15:       if r0 == 0 goto +7 <LBB5_5>
      16:       r1 = r0
      17:       r1 += 16777215
      18:       w2 = 0
      19:       *(u8 *)(r1 + 0) = r2
      20:       r1 = r0
      21:       r2 = 0
      22:       call bpf_ringbuf_submit

00000000000000b8 <LBB5_5>:
      23:       w0 = 0
      24:       exit

For the first case, the single line execution's exploration will prune
the search at insn 14 for the branch insn 9's second leg as it will be
verified first using r2 = -1 (UINT_MAX), while as w1 at insn 9 will
always be 0 so at runtime we don't get error for being greater than
UINT_MAX/4 from bpf_ringbuf_reserve. The verifier during regsafe just
sees reg->precise as false for both r2 registers in both states, hence
considers them equal for purposes of states_equal.

If we propagated precise markers using the backtracking support, we
would use the precise marking to then ensure that old r2 (UINT_MAX) was
within the new r2 (1) and this would never be true, so the verification
would rightfully fail.

The end result is that the out of bounds access at instruction 19 would
be permitted without this fix.

Note that reg->precise is always set to true when user does not have
CAP_BPF (or when subprog count is greater than 1 (i.e. use of any static
or global functions)), hence this is only a problem when precision marks
need to be explicitly propagated (i.e. privileged users with CAP_BPF).

A simplified test case has been included in the next patch to prevent
future regressions.

Fixes: 457f4436 ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: default avatarKumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220823185300.406-2-memxor@gmail.comSigned-off-by: default avatarAlexei Starovoitov <ast@kernel.org>
      2fc31465
    • Linus Torvalds's avatar
      Merge tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup · 3f5c2005
      Linus Torvalds authored 
      Pull another cgroup fix from Tejun Heo:
 "Commit 4f7e7236 ("cgroup: Fix threadgroup_rwsem <->
  cpus_read_lock() deadlock") required the cgroup
  core to grab cpus_read_lock() before invoking ->attach().

  Unfortunately, it missed adding cpus_read_lock() in
  cgroup_attach_task_all(). Fix it"

* tag 'cgroup-for-6.0-rc2-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup: Add missing cpus_read_lock() to cgroup_attach_task_all()
      3f5c2005
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7