This adds a ->execute_hs400_tuning() host callback to enable optional
support for host specific tuning for eMMC HS400 mode. Additionally, share
mmc_get_ext_csd() through the public host headerfile, to allow it to be
used by the host drivers, which is needed to support the HS400 tuning.
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Link: https://lore.kernel.org/r/20210917124803.22871-3-wenbin.mei@mediatek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add hs400 dly3 setting for mtk-sd yaml
Signed-off-by: Wenbin Mei <wenbin.mei@mediatek.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210917124803.22871-2-wenbin.mei@mediatek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The MODULE_DEVICE_TABLE already creates proper alias for platform
driver.  Having another MODULE_ALIAS causes the alias to be duplicated.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsunhg.com>
Link: https://lore.kernel.org/r/20210916170511.137915-1-krzysztof.kozlowski@canonical.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The recent change ("dt-bindings: mmc: Convert MMC Card binding to a schema")
renamed: Documentation/devicetree/bindings/mmc/mmc-card.txt
to: Documentation/devicetree/bindings/mmc/mmc-card.yaml.

Let's update its cross-reference accordingly.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/820bb7a1d7e0e51cbea72c9bee6bce806427d1f3.1631785820.git.mchehab+huawei@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Only wait for DRTO on reads, otherwise the driver hangs.

The driver prevents sending CMD12 on response errors like CRCs. According
to the comment this is because some cards have problems with this during
the UHS tuning sequence. Unfortunately this workaround currently also
applies for any command with data. On reads this will set the drto timer,
which then triggers after a while. On writes this will not set any timer
and the tasklet will not be scheduled again.

I cannot test for the UHS workarounds need, but even if so, it should at
most apply to reads. I have observed many hangs when CMD25 response
contained a CRC error. This patch fixes this without touching the actual
UHS tuning workaround.
Signed-off-by: Christian Loehle <cloehle@hyperstone.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/af8f8b8674ba4fcc9a781019e4aeb72c@hyperstone.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add msm8226 SoC specific compatible strings for qcom-sdhci controller.
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Link: https://lore.kernel.org/r/20210911232707.259615-3-luca@z3ntu.xyzSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the struct_size() helper to do the arithmetic instead of the
argument "size + count * size" in the kzalloc() function.

[1] https://www.kernel.org/doc/html/v5.14/process/deprecated.html#open-coded-arithmetic-in-allocator-argumentsSigned-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210911131933.2089-1-len.baker@gmx.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Print task count that has not been completed, this is for the
purpose of debugging.
Signed-off-by: Bean Huo <beanhuo@micron.com>
Link: https://lore.kernel.org/r/20210907151204.118861-2-huobean@gmail.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Intel Thunder Bay SoC eMMC controller is based on Arasan
eMMC 5.1 host controller IP
Signed-off-by: Rashmi A <rashmi.a@intel.com>
Reviewed-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210829182443.30802-2-rashmi.a@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Add documentation for Arasan SDHCI controller in Thunder Bay SOC.
Signed-off-by: Rashmi A <rashmi.a@intel.com>
Link: https://lore.kernel.org/r/20210829182443.30802-3-rashmi.a@intel.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Use the helper macro SET_RUNTIME_PM_OPS() instead of the verbose
operators ".runtime_suspend/.runtime_resume", because the
SET_RUNTIME_PM_OPS() is a nice helper macro that could be brought
in to make code a little more concise.
Signed-off-by: Cai Huoqing <caihuoqing@baidu.com>
Link: https://lore.kernel.org/r/20210907025940.1535-1-caihuoqing@baidu.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

We never checked for errors on add_disk() as this function returned void.
Now that this is fixed, use the shiny new error handling.

Contrary to the typical removal which delays the put_disk() until later,
since we are failing on a probe we immediately put the disk on failure from
add_disk by using blk_cleanup_disk().
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210902174105.2418771-4-mcgrof@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

We never checked for errors on add_disk() as this function returned void.
Now that this is fixed, use the shiny new error handling.

Contrary to the typical removal which delays the put_disk() until later,
since we are failing on a probe we immediately put the disk on failure from
add_disk by using blk_cleanup_disk().
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210902174105.2418771-3-mcgrof@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

MMC Cards can have an optional Device Tree binding to add
non-discoverable properties.

Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.

Some of these properties were already described in the MMC controller
binding, even though they are not generic and do not apply to any
device, so we took the occasion to fix this.

Cc: linux-mmc@vger.kernel.org
Cc: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210901091852.479202-31-maxime@cerno.techSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

We never checked for errors on add_disk() as this function returned void.
Now that this is fixed, use the shiny new error handling.

The caller only cleanups the disk if we pass on an allocated md but on
error we return return ERR_PTR(ret), and so we must do all the unwinding
ourselves.
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Link: https://lore.kernel.org/r/20210830212538.148729-5-mcgrof@kernel.orgSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Remove unused parameters
1. msdc_start_data() - struct mmc_request *mrq
2. msdc_track_cmd_data() - struct mmc_data *data
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20210830021749.5947-1-cw9316.lee@samsung.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

The mmc_request structure(*mrq) is not used. //msdc_cmd_find_resp
I remove the unnecessary code related to the mmc_request structure.
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Link: https://lore.kernel.org/r/20210827093119.32481-1-cw9316.lee@samsung.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

We found this issue on a 5G platform, during CMDQ error handling, if DMA
status is active when it call msdc_reset_hw(), it means mmc host hw reset
and DMA transfer will be parallel, mmc host may access sram region
unexpectedly. According to the programming guide of mtk-sd host, it needs
to wait for dma stop done after set dma stop.

This change should be applied to all SoCs.
Signed-off-by: Derong Liu <derong.liu@mediatek.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210827071537.1034-1-derong.liu@mediatek.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

It is replaced with a function that is already declared.
//[1/5] mmc: sdhci: Add helpers for the auto-CMD23 flag
//20200412090349.1607-2-adrian.hunter@intel.com
Signed-off-by: ChanWoo Lee <cw9316.lee@samsung.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Link: https://lore.kernel.org/r/20210825093345.14706-1-cw9316.lee@samsung.comSigned-off-by: Ulf Hansson <ulf.hansson@linaro.org>

Pull powerpc fixes from Michael Ellerman:
 "A bit of a big batch, partly because I didn't send any last week, and
  also just because the BPF fixes happened to land this week.

  Summary:

   - Fix a regression hit by the IPR SCSI driver, introduced by the
     recent addition of MSI domains on pseries.

   - A big series including 8 BPF fixes, some with potential security
     impact and the rest various code generation issues.

   - Fix our program check assembler entry path, which was accidentally
     jumping into a gas macro and generating strange stack frames, which
     could confuse find_bug().

   - A couple of fixes, and related changes, to fix corner cases in our
     machine check handling.

   - Fix our DMA IOMMU ops, which were not always returning the optimal
     DMA mask, leading to at least one device falling back to 32-bit DMA
     when it shouldn't.

   - A fix for KUAP handling on 32-bit Book3S.

   - Fix crashes seen when kdumping on some pseries systems.

  Thanks to Naveen N. Rao, Nicholas Piggin, Alexey Kardashevskiy, Cédric
  Le Goater, Christophe Leroy, Mahesh Salgaonkar, Abdul Haleem,
  Christoph Hellwig, Johan Almbladh, Stan Johnson"

* tag 'powerpc-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  pseries/eeh: Fix the kdump kernel crash during eeh_pseries_init
  powerpc/32s: Fix kuap_kernel_restore()
  powerpc/pseries/msi: Add an empty irq_write_msi_msg() handler
  powerpc/64s: Fix unrecoverable MCE calling async handler from NMI
  powerpc/64/interrupt: Reconcile soft-mask state in NMI and fix false BUG
  powerpc/64: warn if local irqs are enabled in NMI or hardirq context
  powerpc/traps: do not enable irqs in _exception
  powerpc/64s: fix program check interrupt emergency stack path
  powerpc/bpf ppc32: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf ppc32: Do not emit zero extend instruction for 64-bit BPF_END
  powerpc/bpf ppc32: Fix JMP32_JSET_K
  powerpc/bpf ppc32: Fix ALU32 BPF_ARSH operation
  powerpc/bpf: Emit stf barrier instruction sequences for BPF_NOSPEC
  powerpc/security: Add a helper to query stf_barrier type
  powerpc/bpf: Fix BPF_SUB when imm == 0x80000000
  powerpc/bpf: Fix BPF_MOD when imm == 1
  powerpc/bpf: Validate branch ranges
  powerpc/lib: Add helper to check if offset is within conditional branch range
  powerpc/iommu: Report the correct most efficient DMA mask for PCI devices

Pull objtool fixes from Borislav Petkov:

 - Remove an extra section.len member in favour of section.sh_size

 - Align .altinstructions section creation with the kernel's by creating
   them with entry size of 0

 - Fix objtool to convert a reloc symbol to a section offset and not to
   not warn about not knowing how

* tag 'objtool_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  objtool: Remove redundant 'len' field from struct section
  objtool: Make .altinstructions section entry size consistent
  objtool: Remove reloc symbol type checks in get_alt_entry()

Pull x86 fixes from Borislav Petkov:

 - A FPU fix to properly handle invalid MXCSR values: 32-bit masks them
   out due to historical reasons and 64-bit kernels reject them

 - A fix to clear X86_FEATURE_SMAP when support for is not
   config-enabled

 - Three fixes correcting misspelled Kconfig symbols used in code

 - Two resctrl object cleanup fixes

 - Yet another attempt at fixing the neverending saga of botched x86
   timers, this time because some incredibly smart hardware decides to
   turn off the HPET timer in a low power state - who cares if the OS is
   relying on it...

 - Check the full return value range of an SEV VMGEXIT call to determine
   whether it returned an error

* tag 'x86_urgent_for_v5.15_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/fpu: Restore the masking out of reserved MXCSR bits
  x86/Kconfig: Correct reference to MWINCHIP3D
  x86/platform/olpc: Correct ifdef symbol to intended CONFIG_OLPC_XO15_SCI
  x86/entry: Clear X86_FEATURE_SMAP when CONFIG_X86_SMAP=n
  x86/entry: Correct reference to intended CONFIG_64_BIT
  x86/resctrl: Fix kfree() of the wrong type in domain_add_cpu()
  x86/resctrl: Free the ctrlval arrays when domain_setup_mon_state() fails
  x86/hpet: Use another crystalball to evaluate HPET usability
  x86/sev: Return an error on a returned non-zero SW_EXITINFO1[31:0]

Pull i2c fixes from Wolfram Sang:
 "Three driver bugfixes and one leak fix for the core"

* 'i2c/for-current-fixed' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: mlxcpld: Modify register setting for 400KHz frequency
  i2c: mlxcpld: Fix criteria for frequency setting
  i2c: mediatek: Add OFFSET_EXT_CONF setting back
  i2c: acpi: fix resource leak in reconfiguration device addition

Pull SCSI fixes from James Bottomley:
 "Five fixes, all in drivers.

  The big change is the UFS task management rework, with lpfc next and
  the rest being fairly minor and obvious fixes"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: iscsi: Fix iscsi_task use after free
  scsi: lpfc: Fix memory overwrite during FC-GS I/O abort handling
  scsi: elx: efct: Delete stray unlock statement
  scsi: ufs: core: Fix task management completion
  scsi: acornscsi: Remove scsi_cmd_to_tag() reference

Pull block fixes from Jens Axboe:
 "Two small fixes for this release:

   - Add missing QUEUE_FLAG_HCTX_ACTIVE in the debugfs handling
     (Johannes)

   - Fix double free / UAF issue in __alloc_disk_node (Tetsuo)"

* tag 'block-5.15-2021-10-09' of git://git.kernel.dk/linux-block:
  block: decode QUEUE_FLAG_HCTX_ACTIVE in debugfs output
  block: genhd: fix double kfree() in __alloc_disk_node()

Pull ksmbd fixes from Steve French:
 "Six fixes for the ksmbd kernel server, including two additional
  overflow checks, a fix for oops, and some cleanup (e.g. remove dead
  code for less secure dialects that has been removed)"

* tag '5.15-rc4-ksmbd-fixes' of git://git.samba.org/ksmbd:
  ksmbd: fix oops from fuse driver
  ksmbd: fix version mismatch with out of tree
  ksmbd: use buf_data_size instead of recalculation in smb3_decrypt_req()
  ksmbd: remove the leftover of smb2.0 dialect support
  ksmbd: check strictly data area in ksmbd_smb2_check_message()
  ksmbd: add the check to vaildate if stream protocol length exceeds maximum value

Pull RISC-V fixes from Palmer Dabbelt:

 - A pair of fixes (along with the necessory cleanup) to our VDSO, to
   avoid a locking during OOM and to prevent the text from overflowing
   into the data page

 - A fix to checksyscalls to teach it about our rv32 UABI

 - A fix to add clone3() to the rv32 UABI, which was pointed out by
   checksyscalls

 - A fix to properly flush the icache on the local CPU in addition to
   the remote CPUs

* tag 'riscv-for-linus-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  checksyscalls: Unconditionally ignore fstat{,at}64
  riscv: Flush current cpu icache before other cpus
  RISC-V: Include clone3() on rv32
  riscv/vdso: make arch_setup_additional_pages wait for mmap_sem for write killable
  riscv/vdso: Move vdso data page up front
  riscv/vdso: Refactor asm/vdso.h

Pull s390 fixes from Vasily Gorbik:

 - Fix potential memory leak on a error path in eBPF

 - Fix handling of zpci device on reserve

* tag 's390-5.15-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/pci: fix zpci_zdev_put() on reserve
  bpf, s390: Fix potential memory leak about jit_data

Pull xtensa fixes from Max Filippov:

 - fix build/boot issues caused by CONFIG_OF vs CONFIC_USE_OF usage

 - fix reset handler for xtfpga boards

* tag 'xtensa-20211008' of git://github.com/jcmvbkbc/linux-xtensa:
  xtensa: xtfpga: Try software restart before simulating CPU reset
  xtensa: xtfpga: use CONFIG_USE_OF instead of CONFIG_OF
  xtensa: call irqchip_init only when CONFIG_USE_OF is selected
  xtensa: use CONFIG_USE_OF instead of CONFIG_OF

Pull xen fixes from Juergen Gross:

 - fix two minor issues in the Xen privcmd driver plus a cleanup patch
   for that driver

 - fix multiple issues related to running as PVH guest and some related
   earlyprintk fixes for other Xen guest types

 - fix an issue introduced in 5.15 the Xen balloon driver

* tag 'for-linus-5.15b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/balloon: fix cancelled balloon action
  xen/x86: adjust data placement
  x86/PVH: adjust function/data placement
  xen/x86: hook up xen_banner() also for PVH
  xen/x86: generalize preferred console model from PV to PVH Dom0
  xen/x86: make "earlyprintk=xen" work for HVM/PVH DomU
  xen/x86: allow "earlyprintk=xen" to work for PV Dom0
  xen/x86: make "earlyprintk=xen" work better for PVH Dom0
  xen/x86: allow PVH Dom0 without XEN_PV=y
  xen/x86: prevent PVH type from getting clobbered
  xen/privcmd: drop "pages" parameter from xen_remap_pfn()
  xen/privcmd: fix error handling in mmap-resource processing
  xen/privcmd: replace kcalloc() by kvcalloc() when allocating empty pages

Merge tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull asm-generic fixes from Arnd Bergmann:
 "There is one build fix for Arm platforms that ended up impacting most
  architectures because of the way the drivers/firmware Kconfig file is
  wired up:

  The CONFIG_QCOM_SCM dependency have caused a number of randconfig
  regressions over time, and some still remain in v5.15-rc4. The fix we
  agreed on in the end is to make this symbol selected by any driver
  using it, and then building it even for non-Arm platforms with
  CONFIG_COMPILE_TEST.

  To make this work on all architectures, the drivers/firmware/Kconfig
  file needs to be included for all architectures to make the symbol
  itself visible.

  In a separate discussion, we found that a sound driver patch that is
  pending for v5.16 needs the same change to include this Kconfig file,
  so the easiest solution seems to have my Kconfig rework included in
  v5.15.

  Finally, the branch also includes a small unrelated build fix for
  NOMMU architectures"

Link: https://lore.kernel.org/all/20210928153508.101208f8@canb.auug.org.au/
Link: https://lore.kernel.org/all/20210928075216.4193128-1-arnd@kernel.org/
Link: https://lore.kernel.org/all/20211007151010.333516-1-arnd@kernel.org/

* tag 'asm-generic-fixes-5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic/io.h: give stub iounmap() on !MMU same prototype as elsewhere
  qcom_scm: hide Kconfig symbol
  firmware: include drivers/firmware/Kconfig unconditionally

Pull ACPI fix from Rafael Wysocki:
 "Fix a recent ACPI-related regression in the PCI subsystem that
  introduced a NULL pointer dereference possible to trigger from
  user space via sysfs on some systems"

* tag 'acpi-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PCI: ACPI: Check parent pointer in acpi_pci_find_companion()

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.15-rc5 that resolve a number of
  reported issues:

   - gadget driver fixes

   - xhci build warning fixes

   - build configuration fix

   - cdc-acm tty handling fixes

   - cdc-wdm fix

   - typec fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix break reporting
  USB: cdc-acm: fix racy tty buffer accesses
  usb: gadget: f_uac2: fixed EP-IN wMaxPacketSize
  usb: cdc-wdm: Fix check for WWAN
  usb: chipidea: ci_hdrc_imx: Also search for 'phys' phandle
  usb: typec: tcpm: handle SRC_STARTUP state if cc changes
  usb: typec: tcpci: don't handle vSafe0V event if it's not enabled
  usb: typec: tipd: Remove dependency on "connector" child fwnode
  Partially revert "usb: Kconfig: using select for USB_COMMON dependency"
  usb: dwc3: gadget: Revert "set gadgets parent to the right controller"
  usb: xhci: tegra: mark PM functions as __maybe_unused

Pull MMC fixes from Ulf Hansson:
 "A couple of MMC host fixes:

   - meson-gx: Fix read/write access for dram-access-quirk

   - sdhci-of-at91: Fix calibration sequence"

* tag 'mmc-v5.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: meson-gx: do not use memcpy_to/fromio for dram-access-quirk
  mmc: sdhci-of-at91: replace while loop with read_poll_timeout
  mmc: sdhci-of-at91: wait for calibration done before proceed

Pull drm fixes from Dave Airlie:
 "I've returned from my tropical island retreat, even managed to bring
  one of my kids on a dive with some turtles. Thanks to Daniel for doing
  last week's work.

  Otherwise this is the weekly fixes pull, it's a bit bigger because the
  vc4 reverts in your tree caused some problems with fixes in the
  drm-misc tree so it got left out last week, so this week has the misc
  fixes rebased without the vc4 pieces.

  Otherwise it's i915, amdgpu with the usual fixes and a scattering over
  other drivers.

  I expect things should calm down a bit more next week.

  core:
   - Kconfig fix for fb_simple vs simpledrm.

  i915:
   - Fix RKL HDMI audio
   - Fix runtime pm imbalance on i915_gem_shrink() error path
   - Fix Type-C port access before hw/sw state sync
   - Fix VBT backlight struct version/size check
   - Fix VT-d async flip on SKL/BXT with plane stretch workaround

  amdgpu:
   - DCN 3.1 DP alt mode fixes
   - S0ix gfxoff fix
   - Fix DRM_AMD_DC_SI dependencies
   - PCIe DPC handling fix
   - DCN 3.1 scaling fix
   - Documentation fix

  amdkfd:
   - Fix potential memory leak
   - IOMMUv2 init fixes

  vc4 (there were some hdmi fixes but things got reverted, sort it out
       later):
   - compiler fix

  nouveau:
   - Cursor fix
   - Fix ttm buffer moves for ampere gpu's by adding minimal
     acceleration support.
   - memory leak fixes

  rockchip:
   - crtc/clk fixup

  panel:
   - ili9341 Fix DT bindings indent
   - y030xx067a - yellow tint init seq fix

  gbefb:
   - Fix gbefb when built with COMPILE_TEST"

* tag 'drm-fixes-2021-10-08' of git://anongit.freedesktop.org/drm/drm: (33 commits)
  drm/amd/display: Fix detection of 4 lane for DPALT
  drm/amd/display: Limit display scaling to up to 4k for DCN 3.1
  drm/amd/display: Skip override for preferred link settings during link training
  drm/nouveau/debugfs: fix file release memory leak
  drm/nouveau/kms/nv50-: fix file release memory leak
  drm/nouveau: avoid a use-after-free when BO init fails
  DRM: delete DRM IRQ legacy midlayer docs
  video: fbdev: gbefb: Only instantiate device when built for IP32
  fbdev: simplefb: fix Kconfig dependencies
  drm/panel: abt-y030xx067a: yellow tint fix
  dt-bindings: panel: ili9341: correct indentation
  drm/nouveau/fifo/ga102: initialise chid on return from channel creation
  drm/rockchip: Update crtc fixup to account for fractional clk change
  drm/nouveau/ga102-: support ttm buffer moves via copy engine
  drm/nouveau/kms/tu102-: delay enabling cursor until after assign_windows
  drm/sun4i: dw-hdmi: Fix HDMI PHY clock setup
  drm/vc4: hdmi: Remove unused struct
  drm/kmb: Enable alpha blended second plane
  drm/amdgpu: handle the case of pci_channel_io_frozen only in amdgpu_pci_resume
  drm/amdgpu: init iommu after amdkfd device init
  ...

It made -Werror sad.
Signed-off-by: Adam Borowski <kilobyte@angband.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Ser Olmy reported a boot failure:

  init[1] bad frame in sigreturn frame:(ptrval) ip:b7c9fbe6 sp:bf933310 orax:ffffffff \
	  in libc-2.33.so[b7bed000+156000]
  Kernel panic - not syncing: Attempted to kill init! exitcode=0x0000000b
  CPU: 0 PID: 1 Comm: init Tainted: G        W         5.14.9 #1
  Hardware name: Hewlett-Packard HP PC/HP Board, BIOS  JD.00.06 12/06/2001
  Call Trace:
   dump_stack_lvl
   dump_stack
   panic
   do_exit.cold
   do_group_exit
   get_signal
   arch_do_signal_or_restart
   ? force_sig_info_to_task
   ? force_sig
   exit_to_user_mode_prepare
   syscall_exit_to_user_mode
   do_int80_syscall_32
   entry_INT80_32

on an old 32-bit Intel CPU:

  vendor_id       : GenuineIntel
  cpu family      : 6
  model           : 6
  model name      : Celeron (Mendocino)
  stepping        : 5
  microcode       : 0x3

Ser bisected the problem to the commit in Fixes.

tglx suggested reverting the rejection of invalid MXCSR values which
this commit introduced and replacing it with what the old code did -
simply masking them out to zero.

Further debugging confirmed his suggestion:

  fpu->state.fxsave.mxcsr: 0xb7be13b4, mxcsr_feature_mask: 0xffbf
  WARNING: CPU: 0 PID: 1 at arch/x86/kernel/fpu/signal.c:384 __fpu_restore_sig+0x51f/0x540

so restore the original behavior only for 32-bit kernels where you have
ancient machines with buggy hardware. For 32-bit programs on 64-bit
kernels, user space which supplies wrong MXCSR values is considered
malicious so fail the sigframe restoration there.

Fixes: 6f9866a1 ("x86/fpu/signal: Let xrstor handle the features to init")
Reported-by: Ser Olmy <ser.olmy@protonmail.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ser Olmy <ser.olmy@protonmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lkml.kernel.org/r/YVtA67jImg3KlBTw@zn.tnic

Merge tag 'amd-drm-fixes-5.15-2021-10-06' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.15-2021-10-06:

amdgpu:
- DCN 3.1 DP alt mode fixes
- S0ix gfxoff fix
- Fix DRM_AMD_DC_SI dependencies
- PCIe DPC handling fix
- DCN 3.1 scaling fix
- Documentation fix

amdkfd:
- Fix potential memory leak
- IOMMUv2 init fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20211006203828.4818-1-alexander.deucher@amd.com

Rebased drm-misc-fixes for v5.15-rc5:
- Dropped vc4 patches.
- Compiler fix for vc4.
- Cursor fix for nouveau.
- Fix ttm buffer moves for ampere gpu's by adding minimal acceleration support.
- Small rockchip fixes.
- Fix DT bindings indent for ili9341.
- Fix y030xx067a init sequence to not get a yellow tint.
- Kconfig fix for fb_simple vs simpledrm.
- Assorted nouvaeu memory leaks.
- Fix gbefb when built with COMPILE_TEST.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3272bf72-2c37-31eb-404e-cf7edd485c7d@linux.intel.com