IEEE 802.1Q-2018 clause 6.7.2 Frame preemption specifies that each
packet priority can be assigned to a "frame preemption status" value of
either "express" or "preemptible". Express priorities are transmitted by
the local device through the eMAC, and preemptible priorities through
the pMAC (the concepts of eMAC and pMAC come from the 802.3 MAC Merge
layer).

The FP adminStatus is defined per packet priority, but 802.1Q clause
12.30.1.1.1 framePreemptionAdminStatus also says that:

| Priorities that all map to the same traffic class should be
| constrained to use the same value of preemption status.

It is impossible to ignore the cognitive dissonance in the standard
here, because it practically means that the FP adminStatus only takes
distinct values per traffic class, even though it is defined per
priority.

I can see no valid use case which is prevented by having the kernel take
the FP adminStatus as input per traffic class (what we do here).
In addition, this also enforces the above constraint by construction.
User space network managers which wish to expose FP adminStatus per
priority are free to do so; they must only observe the prio_tc_map of
the netdev (which presumably is also under their control, when
constructing the mqprio netlink attributes).

The reason for configuring frame preemption as a property of the Qdisc
layer is that the information about "preemptible TCs" is closest to the
place which handles the num_tc and prio_tc_map of the netdev. If the
UAPI would have been any other layer, it would be unclear what to do
with the FP information when num_tc collapses to 0. A key assumption is
that only mqprio/taprio change the num_tc and prio_tc_map of the netdev.
Not sure if that's a great assumption to make.

Having FP in tc-mqprio can be seen as an implementation of the use case
defined in 802.1Q Annex S.2 "Preemption used in isolation". There will
be a separate implementation of FP in tc-taprio, for the other use
cases.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

With the multiplexed ndo_setup_tc() model which lacks a first-class
struct netlink_ext_ack * argument, the only way to pass the netlink
extended ACK message down to the device driver is to embed it within the
offload structure.

Do this for struct tc_mqprio_qopt_offload and struct tc_taprio_qopt_offload.

Since struct tc_taprio_qopt_offload also contains a tc_mqprio_qopt_offload
structure, and since device drivers might effectively reuse their mqprio
implementation for the mqprio portion of taprio, we make taprio set the
extack in both offload structures to point at the same netlink extack
message.

In fact, the taprio handling is a bit more tricky, for 2 reasons.

First is because the offload structure has a longer lifetime than the
extack structure. The driver is supposed to populate the extack
synchronously from ndo_setup_tc() and leave it alone afterwards.
To not have any use-after-free surprises, we zero out the extack pointer
when we leave taprio_enable_offload().

The second reason is because taprio does overwrite the extack message on
ndo_setup_tc() error. We need to switch to the weak form of setting an
extack message, which preserves a potential message set by the driver.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Ferenc reports that a combination of poor iproute2 defaults and obscure
cases where the kernel returns -EINVAL make it difficult to understand
what is wrong with this command:

$ ip link add veth0 numtxqueues 8 numrxqueues 8 type veth peer name veth1
$ tc qdisc add dev veth0 root mqprio num_tc 8 map 0 1 2 3 4 5 6 7 \
        queues 1@0 1@1 1@2 1@3 1@4 1@5 1@6 1@7
RTNETLINK answers: Invalid argument

Hopefully with this patch, the cause is clearer:

Error: Device does not support hardware offload.

The kernel was (and still is) rejecting this because iproute2 defaults
to "hw 1" if this command line option is not specified.

Link: https://lore.kernel.org/netdev/ede5e9a2f27bf83bfb86d3e8c4ca7b34093b99e2.camel@inf.elte.hu/Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Netlink attribute parsing in mqprio is a minesweeper game, with many
options having the possibility of being passed incorrectly and the user
being none the wiser.

Try to make errors less sour by giving user space some information
regarding what went wrong.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 4e8b86c0 ("mqprio: Introduce new hardware offload mode and
shaper in mqprio"), the TCA_OPTIONS format of mqprio was extended to
contain a fixed portion (of size NLA_ALIGN(sizeof struct tc_mqprio_qopt))
and a variable portion of other nlattrs (in the TCA_MQPRIO_* type space)
following immediately afterwards.

In commit feb2cf3d ("net/sched: mqprio: refactor nlattr parsing to a
separate function"), we've moved the nlattr handling to a smaller
function, but yet, a small parse_attr() still remains, and the larger
mqprio_parse_nlattr() still does not have access to the beginning, and
the length, of the TCA_OPTIONS region containing these other nlattrs.

In a future change, the mqprio qdisc will need to iterate through this
nlattr region to discover other attributes, so eliminate parse_attr()
and add 2 variables in mqprio_parse_nlattr() which hold the beginning
and the length of the nlattr range.

We avoid the need to memset when nlattr_opt_len has insufficient length
by pre-initializing the table "tb".
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Create a wrapper over __ethtool_dev_mm_supported() which also calls
ethnl_ops_begin() and ethnl_ops_complete(). It can be used by other code
layers, such as tc, to make sure that preemptible TCs are supported
(this is true if an underlying MAC Merge layer exists).
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ferenc Fejes <fejes@inf.elte.hu>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Make it explicit that this tool is not a drop-in replacement for ethtool.
This tool is intended for testing ethtool functionality implemented in the
kernel and should use a name that differentiates it from the ethtool
utility.
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20230413012252.184434-2-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Absolute paths for the spec and schema files make the ethtool testing tool
unusable with freshly checked-out source trees. Replace absolute paths with
relative paths for both files in the Documentation/ directory.

Issue seen before the change

  Traceback (most recent call last):
    File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 424, in <module>
      main()
    File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/./ethtool", line 158, in main
      ynl = YnlFamily(spec, schema)
    File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/ynl.py", line 342, in __init__
      super().__init__(def_path, schema)
    File "/home/binary-eater/Documents/mlx/linux/tools/net/ynl/lib/nlspec.py", line 333, in __init__
      with open(spec_path, "r") as stream:
  FileNotFoundError: [Errno 2] No such file or directory: '/usr/local/google/home/sdf/src/linux/Documentation/netlink/specs/ethtool.yaml'

Fixes: f3d07b02 ("tools: ynl: ethtool testing tool")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Link: https://lore.kernel.org/r/20230413012252.184434-1-rrameshbabu@nvidia.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Harini Katakam says:

====================
Macb PTP minor updates

- Enable PTP unicast
- Optimize HW timestamp reading
====================

Link: https://lore.kernel.org/r/20230411123712.11459-1-harini.katakam@amd.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The seconds input from BD (6 bits) just needs to be ORed with the
upper bits from timer in this function. Avoid addition operation
every single time. Seconds rollover handling is left untouched.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Enable transmission and reception of PTP unicast packets by
updating PTP unicast config bit and setting current HW mac
address as allowed address in PTP unicast filter registers.
Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@xilinx.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

There are currently two checks for PTP functionality - one on GEM
capability and another on the kernel config option. Combine them
into a single function as there's no use case where gem_has_ptp is
TRUE and MACB_USE_HWSTAMP is false.
Signed-off-by: Harini Katakam <harini.katakam@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Vladimir Oltean says:

====================
Ocelot/Felix driver cleanup

The cleanup mostly handles the statistics code path - some issues
regarding understandability became apparent after the series
"Fix trainwreck with Ocelot switch statistics counters":
https://lore.kernel.org/netdev/20230321010325.897817-1-vladimir.oltean@nxp.com/

There is also one patch which cleans up a misleading comment
in the DSA felix_setup().
====================

Link: https://lore.kernel.org/r/20230412124737.2243527-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since it is hopefully now clear that, since "last" and "layout[i].reg"
are enum types and not addresses, the existing WARN_ON() is ineffective
in checking that the _addresses_ are sorted in the proper order.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "int i" used to index the struct ocelot_stat_layout array actually
has a specific type: enum ocelot_stat. Use it, so that the WARN()
comment from ocelot_prepare_stats_regions() makes more sense.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use the specific enum ocelot_reg to make it clear that the region
registers are encoded and not plain addresses.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

That comment was written prior to knowing that what I was actually
seeing was a manifestation of the bug fixed in commit b4024c9e
("felix: Fix initialization of ioremap resources").

There isn't any particular reason now why the hardware initialization is
done in felix_setup(), so just delete that comment to avoid spreading
misinformation.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Commit a3bb8f52 ("net: mscc: ocelot: remove unnecessary exposure of
stats structures") made an unnecessary change which was to add a new
line at the end of ocelot_stats.c. Remove it.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Acked-by: Colin Foster <colin.foster@in-advantage.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

To make it easier to debug future issues with statistics counters not
getting aggregated properly into regions, like what happened in commit
6acc72a4 ("net: mscc: ocelot: fix stats region batching"), add some
dev_dbg() prints which show the regions that were dynamically
determined.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

ocelot_io.c duplicates the decoding of an enum ocelot_reg (which holds
an enum ocelot_target in the upper bits and an index into a regmap array
in the lower bits) 4 times.

We'd like to reuse that logic once more, from ocelot.c. In order to do
that, let's consolidate the existing 4 instances into a header
accessible both by ocelot.c as well as by ocelot_io.c.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The "u32 reg" argument that is passed to these functions is not a plain
address, but rather a driver-specific encoding of another enum
ocelot_target target in the upper bits, and an index into the
u32 ocelot->map[target][] array in the lower bits. That encoded value
takes the type "enum ocelot_reg" and is what is passed to these I/O
functions, so let's actually use that to prevent type confusion.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

====================
pull-request: bpf-next 2023-04-13

We've added 260 non-merge commits during the last 36 day(s) which contain
a total of 356 files changed, 21786 insertions(+), 11275 deletions(-).

The main changes are:

1) Rework BPF verifier log behavior and implement it as a rotating log
   by default with the option to retain old-style fixed log behavior,
   from Andrii Nakryiko.

2) Adds support for using {FOU,GUE} encap with an ipip device operating
   in collect_md mode and add a set of BPF kfuncs for controlling encap
   params, from Christian Ehrig.

3) Allow BPF programs to detect at load time whether a particular kfunc
   exists or not, and also add support for this in light skeleton,
   from Alexei Starovoitov.

4) Optimize hashmap lookups when key size is multiple of 4,
   from Anton Protopopov.

5) Enable RCU semantics for task BPF kptrs and allow referenced kptr
   tasks to be stored in BPF maps, from David Vernet.

6) Add support for stashing local BPF kptr into a map value via
   bpf_kptr_xchg(). This is useful e.g. for rbtree node creation
   for new cgroups, from Dave Marchevsky.

7) Fix BTF handling of is_int_ptr to skip modifiers to work around
   tracing issues where a program cannot be attached, from Feng Zhou.

8) Migrate a big portion of test_verifier unit tests over to
   test_progs -a verifier_* via inline asm to ease {read,debug}ability,
   from Eduard Zingerman.

9) Several updates to the instruction-set.rst documentation
   which is subject to future IETF standardization
   (https://lwn.net/Articles/926882/), from Dave Thaler.

10) Fix BPF verifier in the __reg_bound_offset's 64->32 tnum sub-register
    known bits information propagation, from Daniel Borkmann.

11) Add skb bitfield compaction work related to BPF with the overall goal
    to make more of the sk_buff bits optional, from Jakub Kicinski.

12) BPF selftest cleanups for build id extraction which stand on its own
    from the upcoming integration work of build id into struct file object,
    from Jiri Olsa.

13) Add fixes and optimizations for xsk descriptor validation and several
    selftest improvements for xsk sockets, from Kal Conley.

14) Add BPF links for struct_ops and enable switching implementations
    of BPF TCP cong-ctls under a given name by replacing backing
    struct_ops map, from Kui-Feng Lee.

15) Remove a misleading BPF verifier env->bypass_spec_v1 check on variable
    offset stack read as earlier Spectre checks cover this,
    from Luis Gerhorst.

16) Fix issues in copy_from_user_nofault() for BPF and other tracers
    to resemble copy_from_user_nmi() from safety PoV, from Florian Lehner
    and Alexei Starovoitov.

17) Add --json-summary option to test_progs in order for CI tooling to
    ease parsing of test results, from Manu Bretelle.

18) Batch of improvements and refactoring to prep for upcoming
    bpf_local_storage conversion to bpf_mem_cache_{alloc,free} allocator,
    from Martin KaFai Lau.

19) Improve bpftool's visual program dump which produces the control
    flow graph in a DOT format by adding C source inline annotations,
    from Quentin Monnet.

20) Fix attaching fentry/fexit/fmod_ret/lsm to modules by extracting
    the module name from BTF of the target and searching kallsyms of
    the correct module, from Viktor Malik.

21) Improve BPF verifier handling of '<const> <cond> <non_const>'
    to better detect whether in particular jmp32 branches are taken,
    from Yonghong Song.

22) Allow BPF TCP cong-ctls to write app_limited of struct tcp_sock.
    A built-in cc or one from a kernel module is already able to write
    to app_limited, from Yixin Shen.

Conflicts:

Documentation/bpf/bpf_devel_QA.rst
  b7abcd9c ("bpf, doc: Link to submitting-patches.rst for general patch submission info")
  0f10f647 ("bpf, docs: Use internal linking for link to netdev subsystem doc")
https://lore.kernel.org/all/20230307095812.236eb1be@canb.auug.org.au/

include/net/ip_tunnels.h
  bc9d003d ("ip_tunnel: Preserve pointer const in ip_tunnel_info_opts")
  ac931d4c ("ipip,ip_tunnel,sit: Add FOU support for externally controlled ipip devices")
https://lore.kernel.org/all/20230413161235.4093777-1-broonie@kernel.org/

net/bpf/test_run.c
  e5995bc7 ("bpf, test_run: fix crashes due to XDP frame overwriting/corruption")
  294635a8 ("bpf, test_run: fix &xdp_frame misplacement for LIVE_FRAMES")
https://lore.kernel.org/all/20230320102619.05b80a98@canb.auug.org.au/
====================

Link: https://lore.kernel.org/r/20230413191525.7295-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Conflicts:

tools/testing/selftests/net/config
  62199e3f ("selftests: net: Add VXLAN MDB test")
  3a0385be ("selftests: add the missing CONFIG_IP_SCTP in net config")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, and bluetooth.

  Not all that quiet given spring celebrations, but "current" fixes are
  thinning out, which is encouraging. One outstanding regression in the
  mlx5 driver when using old FW, not blocking but we're pushing for a
  fix.

  Current release - new code bugs:

   - eth: enetc: workaround for unresponsive pMAC after receiving
     express traffic

  Previous releases - regressions:

   - rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
     pid/seq fields 0 for backward compatibility

  Previous releases - always broken:

   - sctp: fix a potential overflow in sctp_ifwdtsn_skip

   - mptcp:
      - use mptcp_schedule_work instead of open-coding it and make the
        worker check stricter, to avoid scheduling work on closed
        sockets
      - fix NULL pointer dereference on fastopen early fallback

   - skbuff: fix memory corruption due to a race between skb coalescing
     and releasing clones confusing page_pool reference counting

   - bonding: fix neighbor solicitation validation on backup slaves

   - bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp

   - bpf: arm64: fixed a BTI error on returning to patched function

   - openvswitch: fix race on port output leading to inf loop

   - sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
     returning a different errno than expected

   - phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove

   - Bluetooth: fix printing errors if LE Connection times out

   - Bluetooth: assorted UaF, deadlock and data race fixes

   - eth: macb: fix memory corruption in extended buffer descriptor mode

  Misc:

   - adjust the XDP Rx flow hash API to also include the protocol layers
     over which the hash was computed"

* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
  selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
  mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
  veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
  mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
  xdp: rss hash types representation
  selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
  skbuff: Fix a race between coalescing and releasing SKBs
  net: macb: fix a memory corruption in extended buffer descriptor mode
  selftests: add the missing CONFIG_IP_SCTP in net config
  udp6: fix potential access to stale information
  selftests: openvswitch: adjust datapath NL message declaration
  selftests: mptcp: userspace pm: uniform verify events
  mptcp: fix NULL pointer dereference on fastopen early fallback
  mptcp: stricter state check in mptcp_worker
  mptcp: use mptcp_schedule_work instead of open-coding it
  net: enetc: workaround for unresponsive pMAC after receiving express traffic
  sctp: fix a potential overflow in sctp_ifwdtsn_skip
  net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
  rtnetlink: Restore RTM_NEW/DELLINK notification behavior
  net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
  ...

Pull devicetree fixes from Rob Herring:

 - Fix interaction between fw_devlink and DT overlays causing devices to
   not be probed

 - Fix the compatible string for loongson,cpu-interrupt-controller

* tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  treewide: Fix probing of devices in DT overlays
  dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible

Pull pin control fix from Linus Walleij:
 "This is just a revert of the AMD fix, because the fix broke some
  laptops. We are working on a proper solution"

* tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  Revert "pinctrl: amd: Disable and mask interrupts on resume"

Pull drm fixes from Daniel Vetter:

 - two fbcon regressions

 - amdgpu: dp mst, smu13

 - i915: dual link dsi for tgl+

 - armada, nouveau, drm/sched, fbmem

* tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm:
  fbcon: set_con2fb_map needs to set con2fb_map!
  fbcon: Fix error paths in set_con2fb_map
  drm/amd/pm: correct the pcie link state check for SMU13
  drm/amd/pm: correct SMU13.0.7 max shader clock reporting
  drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings
  drm/amd/display: Pass the right info to drm_dp_remove_payload
  drm/armada: Fix a potential double free in an error handling path
  fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace
  drm/nouveau/fb: add missing sysmen flush callbacks
  drm/i915/dsi: fix DSS CTL register offsets for TGL+
  drm/scheduler: Fix UAF race in drm_sched_entity_push_job()

Daniel Borkmann says:

====================
pull-request: bpf 2023-04-13

We've added 6 non-merge commits during the last 1 day(s) which contain
a total of 14 files changed, 205 insertions(+), 38 deletions(-).

The main changes are:

1) One late straggler fix on the XDP hints side which fixes
   bpf_xdp_metadata_rx_hash kfunc API before the release goes out
   in order to provide information on the RSS hash type,
   from Jesper Dangaard Brouer.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
  mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
  veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
  mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
  xdp: rss hash types representation
  selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
====================

Link: https://lore.kernel.org/r/20230413192939.10202-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Short summary of fixes pull:

 * armada: Fix double free
 * fb: Clear FB_ACTIVATE_KD_TEXT in ioctl
 * nouveau: Add missing callbacks
 * scheduler: Fix use-after-free error
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20230413184233.GA8148@linux-uq9g

syzbot reported a splat and bisected it to recent commit ed17aa92 ("bpf,
sockmap: fix deadlocks in the sockhash and sockmap"):

  [...]
  WARNING: CPU: 1 PID: 9280 at kernel/softirq.c:376 __local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
  Modules linked in:
  CPU: 1 PID: 9280 Comm: syz-executor.1 Not tainted 6.2.0-syzkaller-13249-gd319f344 #0
  Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 03/30/2023
  RIP: 0010:__local_bh_enable_ip+0xbe/0x130 kernel/softirq.c:376
  [...]
  Call Trace:
  <TASK>
  spin_unlock_bh include/linux/spinlock.h:395 [inline]
  sock_map_del_link+0x2ea/0x510 net/core/sock_map.c:165
  sock_map_unref+0xb0/0x1d0 net/core/sock_map.c:184
  sock_hash_delete_elem+0x1ec/0x2a0 net/core/sock_map.c:945
  map_delete_elem kernel/bpf/syscall.c:1536 [inline]
  __sys_bpf+0x2edc/0x53e0 kernel/bpf/syscall.c:5053
  __do_sys_bpf kernel/bpf/syscall.c:5166 [inline]
  __se_sys_bpf kernel/bpf/syscall.c:5164 [inline]
  __x64_sys_bpf+0x79/0xc0 kernel/bpf/syscall.c:5164
  do_syscall_x64 arch/x86/entry/common.c:50 [inline]
  do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80
  entry_SYSCALL_64_after_hwframe+0x63/0xcd
  RIP: 0033:0x7fe8f7c8c169
  </TASK>
  [...]

Revert for now until we have a proper solution.

Fixes: ed17aa92 ("bpf, sockmap: fix deadlocks in the sockhash and sockmap")
Reported-by: syzbot+49f6cef45247ff249498@syzkaller.appspotmail.com
Cc: Hsin-Wei Hung <hsinweih@uci.edu>
Cc: Xin Liu <liuxin350@huawei.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/000000000000f1db9605f939720e@google.com/

Jesper Dangaard Brouer says:

====================

Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value,
but doesn't provide information on the RSS hash type (part of 6.3-rc).

This patchset proposal is to change the function call signature via adding
a pointer value argument for providing the RSS hash type.

Patchset also removes all bpf_printk's from xdp_hw_metadata program
that we expect driver developers to use. Instead counters are introduced
for relaying e.g. skip and fail info.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>

Update BPF selftests to use the new RSS type argument for kfunc
bpf_xdp_metadata_rx_hash.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via matching individual Completion Queue Entry (CQE) status bits.

Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893562.340624.12779118462402031248.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type.

The veth driver currently only support XDP-hints based on SKB code path.
The SKB have lost information about the RSS hash type, by compressing
the information down to a single bitfield skb->l4_hash, that only knows
if this was a L4 hash value.

In preparation for veth, the xdp_rss_hash_type have an L4 indication
bit that allow us to return a meaningful L4 indication when working
with SKB based packets.

Fixes: 306531f0 ("veth: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132893055.340624.16209448340644513469.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via mapping table.

The mlx5 hardware can also identify and RSS hash IPSEC.  This indicate
hash includes SPI (Security Parameters Index) as part of IPSEC hash.

Extend xdp core enum xdp_rss_hash_type with IPSEC hash type.

Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892548.340624.11185734579430124869.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.

Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.

The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.

This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.

The RSS type implementations for each driver comes as separate patches.

Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132892042.340624.582563003880565460.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

The tool xdp_hw_metadata can be used by driver developers
implementing XDP-hints metadata kfuncs.

Remove all bpf_printk calls, as the tool already transfers all the
XDP-hints related information via metadata area to AF_XDP
userspace process.

Add counters for providing remaining information about failure and
skipped packet events.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/r/168132891533.340624.7313781245316405141.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

I got really badly confused in d443d938 ("fbcon: move more common
code into fb_open()") because we set the con2fb_map before the failure
points, which didn't look good.

But in trying to fix that I moved the assignment into the wrong path -
we need to do it for _all_ vc we take over, not just the first one
(which additionally requires the call to con2fb_acquire_newinfo).

I've figured this out because of a KASAN bug report, where the
fbcon_registered_fb and fbcon_display arrays went out of sync in
fbcon_mode_deleted() because the con2fb_map pointed at the old
fb_info, but the modes and everything was updated for the new one.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: d443d938 ("fbcon: move more common code into fb_open()")
Reported-by: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+

This is a regressoin introduced in b07db395 ("fbcon: Ditch error
handling for con2fb_release_oldinfo"). I failed to realize what the if
(!err) checks. The mentioned commit was dropping the
con2fb_release_oldinfo() return value but the if (!err) was also
checking whether the con2fb_acquire_newinfo() function call above
failed or not.

Fix this with an early return statement.

Note that there's still a difference compared to the orginal state of
the code, the below lines are now also skipped on error:

	if (!search_fb_in_map(info_idx))
		info_idx = newidx;

These are only needed when we've actually thrown out an old fb_info
from the console mappings, which only happens later on.

Also move the fbcon_add_cursor_work() call into the same if block,
it's all protected by console_lock so doesn't matter when we set up
the blinking cursor delayed work anyway. This further simplifies the
control flow and allows us to ditch the found local variable.

v2: Clarify commit message (Javier)
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Helge Deller <deller@gmx.de>
Tested-by: Xingyuan Mo <hdthky0@gmail.com>
Fixes: b07db395 ("fbcon: Ditch error handling for con2fb_release_oldinfo")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Xingyuan Mo <hdthky0@gmail.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v5.19+

Commit 1effe8ca ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.

to->pp_recycle    --> false
from->pp_recycle  --> true
skb_cloned(from)  --> true

However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.

The double-free error message below prompted us to investigate:
BUG: Bad page state in process swapper/1  pfn:0e0d1
page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
index:0x2 pfn:0xe0d1
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount

CPU: 1 PID: 0 Comm: swapper/1 Tainted: G            E      6.2.0+
Call Trace:
 <IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_pcp_prepare+0x260/0x2f0
free_unref_page+0x20/0x1c0
skb_release_data+0x10b/0x1a0
napi_consume_skb+0x56/0x150
net_rx_action+0xf0/0x350
? __napi_schedule+0x79/0x90
__do_softirq+0xc8/0x2b1
__irq_exit_rcu+0xb9/0xf0
common_interrupt+0x82/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0xb/0x20

Fixes: 53e0961d ("page_pool: add frag page recycling support in page pool")
Signed-off-by: Liang Chen <liangchen.linux@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20230413090353.14448-1-liangchen.linux@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>