- 08 Jun, 2023 1 commit
-
-
Zhi Wang authored
Remove unused variable gma_bottom in scan_workload() and scan_wa_ctx(). commit be1da707 ("drm/i915/gvt: vGPU command scanner") introduces gma_bottom in several functions to calculate the size of the command buffer. However, some of them are set but actually unused. When compiling the code with ccflags -Wunused-but-set-variable, gcc throws warnings. Remove unused variables to avoid the gcc warnings. Tested via compiling the code with ccflags -Wunused-but-set-variable. Fixes: be1da707 ("drm/i915/gvt: vGPU command scanner") Suggested-by:
Jani Nikula <jani.nikula@intel.com> Cc: Zhenyu Wang <zhenyuw@linux.intel.com> Cc: intel-gvt-dev@lists.freedesktop.org Signed-off-by:
Zhi Wang <zhi.a.wang@intel.com> Reviewed-by:
Zhenyu Wang <zhenyuw@linux.intel.com> Reviewed-by:
Andi Shyti <andi.shyti@linux.intel.com> Signed-off-by:
-
- 07 Jun, 2023 23 commits
-
-
Matt Roper authored
Drop the unnecessary directory prefix. This also makes intel_display_device.h easier to use from the Xe driver. Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
Matt Roper <matthew.d.roper@intel.com> Reviewed-by:
-
Mika Kahola authored
MTL introduces a new way to instruct the PUnit with power and bandwidth requirements of DE. Add the functionality to program the registers and handle waits using interrupts. The current wait time for timeouts is programmed for 10 msecs to factor in the worst case scenarios. Changes made to use REG_BIT for a register that we touched(GEN8_DE_MISC_IER _MMIO). Wa_14016740474 is added which applies to Xe_LPD+ display v2: checkpatch warning fixes, simplify program pmdemand part v3: update to dbufs and pipes values to pmdemand register(stan) Removed the macro usage in update_pmdemand_values() v4: move the pmdemand_pre_plane_update before cdclk update pmdemand_needs_update included cdclk params comparisons pmdemand_state NULL check (Gustavo) pmdemand.o in sorted order in the makefile (Jani) update pmdemand misc irq handler loop (Gustavo) active phys bitmask and programming correction (Gustavo) v5: simplify pmdemand_state structure simplify methods to find active phys and max port clock Timeout in case of previou pmdemand task pending (Gustavo) v6: rebasing updates to max_ddiclk calculations (Gustavo) updates to active_phys count method (Gustavo) v7: use two separate loop to iterate throug old and new crtc states to calculate the active phys (Gustavo) v8: use uniform function names (Gustavo) v9: For phys change iterate through connectors (Imre) Look for change in phys for pmdemand update (Gustavo, Imre) Some more stlying changes (Imre) Update pmdemand state during HW readout/sanitize (Imre) v10: Fix CI checkpatch warnings v11: use correct pmdemand object pointer during hw readout, simplify the check for phys need update (Gustavo) v12: Handle possible non serialize cases (Imre) Initialise also pmdemand params HW readout (Imre) Update active phys mask during sanitize calls (Imre) Check TC/encoder changes to limit connector update (Imre) v13: Check display version before accessing pmdemand functions v14: Move is_serialized to intel_global_state.c simplify update params and other stlying issues (Imre) Bspec: 66451, 64636, 64602, 64603 Cc: Matt Atwood <matthew.s.atwood@intel.com> Cc: Matt Roper <matthew.d.roper@intel.com> Cc: Lucas De Marchi <lucas.demarchi@intel.com> Cc: Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:José Roberto de Souza <jose.souza@intel.com> Signed-off-by:
Gustavo Sousa <gustavo.sousa@intel.com> Signed-off-by:
Mika Kahola <mika.kahola@intel.com> Signed-off-by:
Vinod Govindapillai <vinod.govindapillai@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> #v4 Acked-by: Gustavo Sousa <gustavo.sousa@intel.com> #v11 Reviewed-by:
Imre Deak <imre.deak@intel.com> [RK: Fixed minor typo in one of the comments. s/qclck_gc/qclk_gv/] Signed-off-by:
Radhakrishna Sripada <radhakrishna.sripada@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230606201032.347449-1-vinod.govindapillai@intel.com
-
Vinod Govindapillai authored
From MTL onwards, we need to find the best QGV point based on the required data rate and pass the peak BW of that point to the punit to lock the corresponding QGV point. v1: Fix for warning from kernel test robot v2: No need to serialize for the peakbw change as pmdemand code will do that (Imre) Bspec: 64636 Reported-by:kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/r/202305280253.Ab8bRV2w-lkp@intel.com/Reported-by:
Dan Carpenter <error27@gmail.com> Closes: https://lore.kernel.org/r/202305280253.Ab8bRV2w-lkp@intel.com/Signed-off-by:
Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by:
-
Vinod Govindapillai authored
MTL uses the peak BW of a QGV point to lock the required QGV point instead of the QGV index. Instead of passing the deratedbw of the selected bw_info, return the index to the selected bw_info so that either deratedbw or peakbw can be used based on the platform. v2: use idx to store index returned by max_bw_index functions v3: return UINT_MAX in icl_max_bw_index in case no match found v3: check idx >= ARRAY_SIZE Signed-off-by:
-
Vinod Govindapillai authored
Extract intel_bw_check_qgv_points() from intel_bw_atomic_check to facilitate future platform variations in handling SAGV configurations. Signed-off-by:
-
Vinod Govindapillai authored
In MTL onwards, pcode locks the GV point based on the peak BW of a QGV point. So store the peak BW of all the QGV points. v2: use DIV_ROUND_CLOSEST() for the peakBW calculation Bspec: 64636 Signed-off-by:
-
Vinod Govindapillai authored
From MTL onwwards, pcode locks the QGV point based on peak BW of the intended QGV point passed by the driver. So the peak BW calculation must match the value expected by the pcode. Update the calculations as per the Bspec. v2: use DIV_ROUND_* macro for the calculations (Ville) v3: Use only DIV_ROUN_CLOSEST and remove divisor / 2 again Bspec: 64636 Signed-off-by:
-
Vinod Govindapillai authored
Follow the values from bspec for the percentage overhead for efficiency in MTL BW calculations. Bspec: 64631 Signed-off-by:
-
Khaled Almahallawy authored
"CDS interlane align done" is a passing condition not an error. Before adding new macros for logs it was drm_dbg_kms. Fixes: f48eab29 ("drm/i915/dp: Add link training debug and error printing helpers") Cc: Imre Deak <imre.deak@intel.com> CC: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. for_each_new_intel_crtc_in_state() requires passing in a struct intel_crtc_state pointer, which it uses, but in a few places this leads to warning about unused but set variables. Annotate them with __maybe_unused. Signed-off-by:
Jouni Högander <jouni.hogander@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/eb041f426bc3d76ef7a0ea906f99367cbf439b1a.1685119007.git.jani.nikula@intel.com
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. for_each_new_intel_plane_in_state() requires passing in a struct intel_plane_state pointer, which it uses, but in many places this leads to warning about unused but set variables. Annotate them with __maybe_unused. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. The variable is indeed 'unused' as the name suggests, but we can't just drop it because i915_vma_unbind_unlocked() is annotated __must_check. Apparently the selftest does not really need to check the value. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. The variable 'c' appears unused, but I'm not sure what should be done with it. Annotate it with __maybe_unused. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Apparently sseu is leftover from commit 9a92732f ("drm/i915/gt: Add general DSS steering iterator to intel_gt_mcr"). Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. The vbp is not used for anything in the readout, as we get e.g. crtc_vtotal from BXT_MIPI_TRANS_VTOTAL. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. Signed-off-by:
-
Jani Nikula authored
Prepare for re-enabling -Wunused-but-set-variable. The intel_dp variable has been unused since commit ef79fafe ("drm/i915: Eliminate intel_dp.regs.dp_tp_{ctl,status}"). Signed-off-by:
-
Jani Nikula authored
We assume the plane offset is 0. Warn if it's not. This also fixes a warn on unused but set variable offset. v2: initialize offset on the gen2/3 path (Ville) Suggested-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
-
Jani Nikula authored
Only the EDID code and sysfs should look at the EDID property. Stop using it. Signed-off-by:
-
- 05 Jun, 2023 6 commits
-
-
Matt Roper authored
If i915_driver_create() fails to create a valid 'i915' object, we should just disable the PCI device and return immediately without trying to call i915_probe_error() that relies on a valid i915 pointer. Fixes: 12e6f6dc ("drm/i915/display: Handle GMD_ID identification in display code") Reported-by:
Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/55236f93-dcc5-481e-b788-9f7e95b129d8@kili.mountain/Signed-off-by:
-
Matt Roper authored
Moving display-specific runtime info initialization into display/ makes the display code more self-contained and also makes it easier to call from the Xe driver. v2: - Drop unnecessary display/ prefix from #includes. (Jani) - Clear runtime info if fusing leaves no pipes remaining, the same as we do when fusing indicates the entire display controller is unavailable. (Jani) - Move adjustment of DRIVER_MODESET / DRIVER_ATOMIC after call to intel_display_device_info_runtime_init(); HAS_DISPLAY may have changed to false during the runtime init. (Jani) Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by:
-
Ville Syrjälä authored
Apparently desktop gen3 parts don't support the 10bit gamma mode at all. Stop claiming otherwise. As is the case with pipe A on gen3 mobile parts, the PIPECONF gamma mode bit can be set but it has no effect on the output. PNV seems to be the only slight exception, but generally the desktop PNV variant looks more like a mobile part so this is not entirely surprising. Fixes: 67630bac ("drm/i915: Add 10bit gamma mode for gen2/3") Signed-off-by:
Uma Shankar <uma.shankar@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230531135625.3467-1-ville.syrjala@linux.intel.com
-
Arun R Murthy authored
For modifier not supporting async flip, print the modifier and display version. Helps in reading the error message. v2: Reframe the error message (Jani) Signed-off-by:
Arun R Murthy <arun.r.murthy@intel.com> Signed-off-by:
-
Mika Kahola authored
In case when only two or less transmit lanes are owned such as MFD (DP-alt with x2 lanes) we need to reset only one data lane (lane0). With only x2 lanes we don't need to poll for the phy current status on both data lanes since only the owned data lane will respond. v2: Find better naming for lanes and revise the commit message (Luca) Reviewed-by: Arun R Murthy <arun.r.murthy@intel.com> (v1) Signed-off-by:
-
Jouni Högander authored
HW default for wake sync pulses is 18. 10 precharge and 8 preamble. There is no reason to change this especially as it is causing problems with certain eDP panels. v3: Change "Fixes:" commit v2: Remove "fast wake" repeat from subject Signed-off-by:
Luca Coelho <luciano.coelho@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20230530101649.2549949-1-jouni.hogander@intel.com
-
- 02 Jun, 2023 10 commits
-
-
Chaitanya Kumar Borah authored
According to Bspec, the voltage level for 480MHz is to be set as 1 instead of 2. BSpec: 49208 Fixes: 06f1b06d ("drm/i915/display: Add 480 MHz CDCLK steps for RPL-U") v2: rebase Signed-off-by:
Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com> Reviewed-by:
-
Maarten Lankhorst authored
When intel_dp_init_connector fails, some power wells used in dp aux communication may not be completely disabled yet. This may result in a null pointer dereference when icl_aux_pw_to_phy() is called from icl_combo_phy_aux_power_well_disable() after the encoder and connector are already freed. Signed-off-by:
Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Acked-by:
-
Maarten Lankhorst authored
enum i915_drm_suspend_mode suspend_mode is only used in intel_display_power, while we only care about whether we perform a s2idle. Remove it and use a simple bool. v2: Rebase Signed-off-by:
-
Sui Jingfeng authored
'rbiter' -> 'arbiter' Signed-off-by:
Sui Jingfeng <suijingfeng@loongson.cn> Signed-off-by:
-
Jani Nikula authored
Convert the remaining uses of struct edid based drm_get_edid(), drm_connector_update_edid_property() and drm_add_edid_modes() calls to the struct drm_edid based drm_edid_read_ddc(), drm_edid_connector_update() and drm_edid_connector_add_modes(). Reviewed-by:
Ankit Nautiyal <ankit.k.nautiyal@intel.com> Signed-off-by:
-
Jani Nikula authored
Convert the topology manager to use struct drm_edid, add drm_dp_mst_edid_read() that returns drm_edid, and rewrite the old drm_dp_mst_get_edid() to use it. Note that the old drm_get_edid() ended up calling drm_connector_update_edid_property(). This responsibility is now deferred to drivers, which all do it anyway after calling drm_dp_mst_edid_read() or drm_dp_mst_get_edid(). Reviewed-by:
Thomas Zimmermann <tzimmermann@suse.de> Signed-off-by:
-
Jani Nikula authored
It's a bit tedious to check for NULL before calling drm_edid_duplicate(). Make it handle NULL parameter graciously. Reviewed-by:
-
Jani Nikula authored
Use drm_edid_read_switcheroo() to switch from struct edid to struct drm_edid. Reviewed-by:
Lukas Wunner <lukas@wunner.de> Signed-off-by:
-
Jani Nikula authored
Add a switcheroo variant to the struct drm_edid based EDID read functions. Reviewed-by:
-
Jani Nikula authored
Use the information stored in display info. Reviewed-by:
-
