- 27 Mar, 2019 32 commits
-
-
Jeremy Cline authored
commit 32a7b4cb upstream. The hci_dev struct hdev is referenced in work queues and timers started by open() in some protocols. This creates a race between the initialization function and the work or timer which can result hdev being dereferenced while it is still null. The syzbot report contains a reliable reproducer which causes a null pointer dereference of hdev in hci_uart_write_work() by making the memory allocation for hdev fail. To fix this, ensure hdev is valid from before calling a protocol's open() until after calling a protocol's close(). Reported-by: syzbot+257790c15bcdef6fe00c@syzkaller.appspotmail.com Signed-off-by:
Jeremy Cline <jcline@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Myungho Jung authored
commit e20a2e9c upstream. When releasing socket, it is possible to enter hci_sock_release() and hci_sock_dev_event(HCI_DEV_UNREG) at the same time in different thread. The reference count of hdev should be decremented only once from one of them but if storing hdev to local variable in hci_sock_release() before detached from socket and setting to NULL in hci_sock_dev_event(), hci_dev_put(hdev) is unexpectedly called twice. This is resolved by referencing hdev from socket after bt_sock_unlink() in hci_sock_release(). Reported-by: syzbot+fdc00003f4efff43bc5b@syzkaller.appspotmail.com Signed-off-by:
Myungho Jung <mhjungk@gmail.com> Signed-off-by:
-
Myungho Jung authored
commit 1dc2d785 upstream. h4_recv_buf() callers store the return value to socket buffer and recursively pass the buffer to h4_recv_buf() without protection. So, ERR_PTR returned from h4_recv_buf() can be dereferenced, if called again before setting the socket buffer to NULL from previous error. Check if skb is ERR_PTR in h4_recv_buf(). Reported-by: syzbot+017a32f149406df32703@syzkaller.appspotmail.com Signed-off-by:
-
Hans Verkuil authored
commit f45f3f75 upstream. Control events can leak kernel memory since they do not fully zero the event. The same code is present in both v4l2-ctrls.c and uvc_ctrl.c, so fix both. It appears that all other event code is properly zeroing the structure, it's these two places. Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: syzbot+4f021cf3697781dbd9fb@syzkaller.appspotmail.com Reviewed-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Signed-off-by:
-
zhangyi (F) authored
commit 674a2b27 upstream. All indirect buffers get by ext4_find_shared() should be released no mater the branch should be freed or not. But now, we forget to release the lower depth indirect buffers when removing space from the same higher depth indirect block. It will lead to buffer leak and futher more, it may lead to quota information corruption when using old quota, consider the following case. - Create and mount an empty ext4 filesystem without extent and quota features, - quotacheck and enable the user & group quota, - Create some files and write some data to them, and then punch hole to some files of them, it may trigger the buffer leak problem mentioned above. - Disable quota and run quotacheck again, it will create two new aquota files and write the checked quota information to them, which probably may reuse the freed indirect block(the buffer and page cache was not freed) as data block. - Enable quota again, it will invoke vfs_load_quota_inode()->invalidate_bdev() to try to clean unused buffers and pagecache. Unfortunately, because of the buffer of quota data block is still referenced, quota code cannot read the up to date quota info from the device and lead to quota information corruption. This problem can be reproduced by xfstests generic/231 on ext3 file system or ext4 file system without extent and quota features. This patch fix this problem by releasing the missing indirect buffers, in ext4_ind_remove_space(). Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
zhangyi (F) <yi.zhang@huawei.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Reviewed-by:
Jan Kara <jack@suse.cz> Cc: stable@kernel.org Signed-off-by:
-
Lukas Czerner authored
commit 372a03e0 upstream. Ext4 needs to serialize unaligned direct AIO because the zeroing of partial blocks of two competing unaligned AIOs can result in data corruption. However it decides not to serialize if the potentially unaligned aio is past i_size with the rationale that no pending writes are possible past i_size. Unfortunately if the i_size is not block aligned and the second unaligned write lands past i_size, but still into the same block, it has the potential of corrupting the previous unaligned write to the same block. This is (very simplified) reproducer from Frank // 41472 = (10 * 4096) + 512 // 37376 = 41472 - 4096 ftruncate(fd, 41472); io_prep_pwrite(iocbs[0], fd, buf[0], 4096, 37376); io_prep_pwrite(iocbs[1], fd, buf[1], 4096, 41472); io_submit(io_ctx, 1, &iocbs[1]); io_submit(io_ctx, 1, &iocbs[2]); io_getevents(io_ctx, 2, 2, events, NULL); Without this patch the 512B range from 40960 up to the start of the second unaligned write (41472) is going to be zeroed overwriting the data written by the first write. This is a data corruption. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 With this patch the data corruption is avoided because we will recognize the unaligned_aio and wait for the unwritten extent conversion. 00000000 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * 00009200 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 30 * 0000a200 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 31 * 0000b200 Reported-by:
Frank Sorenson <fsorenso@redhat.com> Signed-off-by:
Lukas Czerner <lczerner@redhat.com> Signed-off-by:
-
Jiufei Xue authored
commit fa30dde3 upstream. We see the following NULL pointer dereference while running xfstests generic/475: BUG: unable to handle kernel NULL pointer dereference at 0000000000000008 PGD 8000000c84bad067 P4D 8000000c84bad067 PUD c84e62067 PMD 0 Oops: 0000 [#1] SMP PTI CPU: 7 PID: 9886 Comm: fsstress Kdump: loaded Not tainted 5.0.0-rc8 #10 RIP: 0010:ext4_do_update_inode+0x4ec/0x760 ... Call Trace: ? jbd2_journal_get_write_access+0x42/0x50 ? __ext4_journal_get_write_access+0x2c/0x70 ? ext4_truncate+0x186/0x3f0 ext4_mark_iloc_dirty+0x61/0x80 ext4_mark_inode_dirty+0x62/0x1b0 ext4_truncate+0x186/0x3f0 ? unmap_mapping_pages+0x56/0x100 ext4_setattr+0x817/0x8b0 notify_change+0x1df/0x430 do_truncate+0x5e/0x90 ? generic_permission+0x12b/0x1a0 This is triggered because the NULL pointer handle->h_transaction was dereferenced in function ext4_update_inode_fsync_trans(). I found that the h_transaction was set to NULL in jbd2__journal_restart but failed to attached to a new transaction while the journal is aborted. Fix this by checking the handle before updating the inode. Fixes: b436b9be ("ext4: Wait for proper transaction commit on fsync") Signed-off-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Cc: stable@kernel.org Signed-off-by:
-
Takashi Iwai authored
commit 31d2350d upstream. ac97_of_get_child_device() take the refcount of the node explicitly via of_node_get(), but this leads to an unbalance. The for_each_child_of_node() loop itself takes the refcount for each iteration node, hence you don't need to take the extra refcount again. Fixes: 2225a3e6 ("ALSA: ac97: add codecs devicetree binding") Reviewed-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Arnd Bergmann authored
commit 1e73359a upstream. When building without CONFIG_PCI, we can (depending on the architecture) get a link failure: ERROR: "pci_iounmap" [sound/pci/hda/snd-hda-codec-ca0132.ko] undefined! Adding a compile-time check for PCI gets it to work correctly on 32-bit ARM. Fixes: d99501b8 ("ALSA: hda/ca0132 - Call pci_iounmap() instead of iounmap()") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Ville Syrjälä authored
commit 8dfb839c upstream. Commit 46e831ab ("drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"") broke runtime PM with lpe audio. We can no longer runtime suspend the GPU since the sysfs power/control for the lpe-audio device no longer exists and the device is considered always active. We can fix this by not marking the device as active. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Fixes: 46e831ab ("drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"") Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181024154825.18185-1-ville.syrjala@linux.intel.comReviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Acked-by:
-
Steve French authored
commit 8c11a607 upstream. Workaround problem with Samba responses to SMB3.1.1 null user (guest) mounts. The server doesn't set the expected flag in the session setup response so we have to do a similar check to what is done in smb3_validate_negotiate where we also check if the user is a null user (but not sec=krb5 since username might not be passed in on mount for Kerberos case). Note that the commit below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for cases where there is no user (even if server forgets to set the flag in the response) since we don't have anything useful to sign with. This is especially important now that the more secure SMB3.1.1 protocol is in the default dialect list. An earlier patch ("cifs: allow guest mounts to work for smb3.11") fixed the guest mounts to Windows. Fixes: 6188f28b ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Reviewed-by:
Ronnie Sahlberg <lsahlber@redhat.com> Reviewed-by:
Paulo Alcantara <palcantara@suse.de> CC: Stable <stable@vger.kernel.org> Signed-off-by:
Steve French <stfrench@microsoft.com> Signed-off-by:
-
Rasmus Villemoes authored
commit 89dc8917 upstream. The lpi_range_list is supposed to be sorted in ascending order of ->base_id (at least if the range merging is to work), but the current comparison function returns a positive value if rb->base_id > ra->base_id, which means that list_sort() will put A after B in that case - and vice versa, of course. Fixes: 880cb3cd (irqchip/gic-v3-its: Refactor LPI allocator) Cc: stable@vger.kernel.org (v4.19+) Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 0c671812 upstream. Objtool uses over 512k of stack, thanks to the hash table embedded in the objtool_file struct. This causes an unnecessarily large stack allocation and breaks users with low stack limits. Move the struct off the stack. Fixes: 042ba73f ("objtool: Add several performance improvements") Reported-by:
Vassili Karpov <moosotc@gmail.com> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/df92dcbc4b84b02ffa252f46876df125fb56e2d7.1552954176.git.jpoimboe@redhat.comSigned-off-by:
-
Adrian Hunter authored
commit eaeffeb9 upstream. Since commit 4d99e413 ("perf machine: Workaround missing maps for x86 PTI entry trampolines"), perf tools has been creating more than one kernel map, however 'perf probe' assumed there could be only one. Fix by using machine__kernel_map() to get the main kernel map. Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Masami Hiramatsu <mhiramat@kernel.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Jiufei Xue <jiufei.xue@linux.alibaba.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: stable@vger.kernel.org Cc: Xu Yu <xuyu@linux.alibaba.com> Fixes: 4d99e413 ("perf machine: Workaround missing maps for x86 PTI entry trampolines") Fixes: d83212d5 ("kallsyms, x86: Export addresses of PTI entry trampolines") Link: http://lkml.kernel.org/r/2ed432de-e904-85d2-5c36-5897ddc5b23b@intel.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Ronnie Sahlberg authored
commit e71ab2aa upstream. Fix Guest/Anonymous sessions so that they work with SMB 3.11. The commit noted below tightened the conditions and forced signing for the SMB2-TreeConnect commands as per MS-SMB2. However, this should only apply to normal user sessions and not for Guest/Anonumous sessions. Fixes: 6188f28b ("Tree connect for SMB3.1.1 must be signed for non-encrypted shares") Signed-off-by:
-
Chen Jie authored
commit 5a07168d upstream. The futex code requires that the user space addresses of futexes are 32bit aligned. sys_futex() checks this in futex_get_keys() but the robust list code has no alignment check in place. As a consequence the kernel crashes on architectures with strict alignment requirements in handle_futex_death() when trying to cmpxchg() on an unaligned futex address which was retrieved from the robust list. [ tglx: Rewrote changelog, proper sizeof() based alignement check and add comment ] Fixes: 0771dfef ("[PATCH] lightweight robust futexes: core") Signed-off-by:
Chen Jie <chenjie6@huawei.com> Signed-off-by:
-
Tyrel Datwyler authored
commit 7f5203c1 upstream. The event pool used for queueing commands is destroyed fairly early in the ibmvscsi_remove() code path. Since, this happens prior to the call so scsi_remove_host() it is possible for further calls to queuecommand to be processed which manifest as a panic due to a NULL pointer dereference as seen here: PANIC: "Unable to handle kernel paging request for data at address 0x00000000" Context process backtrace: DSISR: 0000000042000000 ????Syscall Result: 0000000000000000 4 [c000000002cb3820] memcpy_power7 at c000000000064204 [Link Register] [c000000002cb3820] ibmvscsi_send_srp_event at d000000003ed14a4 5 [c000000002cb3920] ibmvscsi_send_srp_event at d000000003ed14a4 [ibmvscsi] ?(unreliable) 6 [c000000002cb39c0] ibmvscsi_queuecommand at d000000003ed2388 [ibmvscsi] 7 [c000000002cb3a70] scsi_dispatch_cmd at d00000000395c2d8 [scsi_mod] 8 [c000000002cb3af0] scsi_request_fn at d00000000395ef88 [scsi_mod] 9 [c000000002cb3be0] __blk_run_queue at c000000000429860 10 [c000000002cb3c10] blk_delay_work at c00000000042a0ec 11 [c000000002cb3c40] process_one_work at c0000000000dac30 12 [c000000002cb3cd0] worker_thread at c0000000000db110 13 [c000000002cb3d80] kthread at c0000000000e3378 14 [c000000002cb3e30] ret_from_kernel_thread at c00000000000982c The kernel buffer log is overfilled with this log: [11261.952732] ibmvscsi: found no event struct in pool! This patch reorders the operations during host teardown. Start by calling the SRP transport and Scsi_Host remove functions to flush any outstanding work and set the host offline. LLDD teardown follows including destruction of the event pool, freeing the Command Response Queue (CRQ), and unmapping any persistent buffers. The event pool destruction is protected by the scsi_host lock, and the pool is purged prior of any requests for which we never received a response. Finally, move the removal of the scsi host from our global list to the end so that the host is easily locatable for debugging purposes during teardown. Cc: <stable@vger.kernel.org> # v2.6.12+ Signed-off-by:
Tyrel Datwyler <tyreld@linux.vnet.ibm.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tyrel Datwyler authored
commit 7205981e upstream. For each ibmvscsi host created during a probe or destroyed during a remove we either add or remove that host to/from the global ibmvscsi_head list. This runs the risk of concurrent modification. This patch adds a simple spinlock around the list modification calls to prevent concurrent updates as is done similarly in the ibmvfc driver and ipr driver. Fixes: 32d6e4b6 ("scsi: ibmvscsi: add vscsi hosts to global list_head") Cc: <stable@vger.kernel.org> # v4.10+ Signed-off-by:
-
Michael Ellerman authored
commit b5b4453e upstream. Jakub Drnec reported: Setting the realtime clock can sometimes make the monotonic clock go back by over a hundred years. Decreasing the realtime clock across the y2k38 threshold is one reliable way to reproduce. Allegedly this can also happen just by running ntpd, I have not managed to reproduce that other than booting with rtc at >2038 and then running ntp. When this happens, anything with timers (e.g. openjdk) breaks rather badly. And included a test case (slightly edited for brevity): #define _POSIX_C_SOURCE 199309L #include <stdio.h> #include <time.h> #include <stdlib.h> #include <unistd.h> long get_time(void) { struct timespec tp; clock_gettime(CLOCK_MONOTONIC, &tp); return tp.tv_sec + tp.tv_nsec / 1000000000; } int main(void) { long last = get_time(); while(1) { long now = get_time(); if (now < last) { printf("clock went backwards by %ld seconds!\n", last - now); } last = now; sleep(1); } return 0; } Which when run concurrently with: # date -s 2040-1-1 # date -s 2037-1-1 Will detect the clock going backward. The root cause is that wtom_clock_sec in struct vdso_data is only a 32-bit signed value, even though we set its value to be equal to tk->wall_to_monotonic.tv_sec which is 64-bits. Because the monotonic clock starts at zero when the system boots the wall_to_montonic.tv_sec offset is negative for current and future dates. Currently on a freshly booted system the offset will be in the vicinity of negative 1.5 billion seconds. However if the wall clock is set past the Y2038 boundary, the offset from wall to monotonic becomes less than negative 2^31, and no longer fits in 32-bits. When that value is assigned to wtom_clock_sec it is truncated and becomes positive, causing the VDSO assembly code to calculate CLOCK_MONOTONIC incorrectly. That causes CLOCK_MONOTONIC to jump ahead by ~4 billion seconds which it is not meant to do. Worse, if the time is then set back before the Y2038 boundary CLOCK_MONOTONIC will jump backward. We can fix it simply by storing the full 64-bit offset in the vdso_data, and using that in the VDSO assembly code. We also shuffle some of the fields in vdso_data to avoid creating a hole. The original commit that added the CLOCK_MONOTONIC support to the VDSO did actually use a 64-bit value for wtom_clock_sec, see commit a7f290da ("[PATCH] powerpc: Merge vdso's and add vdso support to 32 bits kernel") (Nov 2005). However just 3 days later it was converted to 32-bits in commit 0c37ec2a ("[PATCH] powerpc: vdso fixes (take #2)"), and the bug has existed since then AFAICS. Fixes: 0c37ec2a ("[PATCH] powerpc: vdso fixes (take #2)") Cc: stable@vger.kernel.org # v2.6.15+ Link: http://lkml.kernel.org/r/HaC.ZfES.62bwlnvAvMP.1STMMj@seznam.czReported-by:
Jakub Drnec <jaydee@email.cz> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Archer Yan authored
commit 47c25036 upstream. Insert Branch instruction instead of NOP to make sure assembler don't patch code in forbidden slot. In jump label function, it might be possible to patch Control Transfer Instructions(CTIs) into forbidden slot, which will generate Reserved Instruction exception in MIPS release 6. Signed-off-by:
Archer Yan <ayan@wavecomp.com> Reviewed-by:
Paul Burton <paul.burton@mips.com> [paul.burton@mips.com: - Add MIPS prefix to subject. - Mark for stable from v4.0, which introduced r6 support, onwards.] Signed-off-by:
-
Yasha Cherikovsky authored
commit 3f0a53bc upstream. This fixes booting with the combination of CONFIG_RELOCATABLE=y and CONFIG_MIPS_ELF_APPENDED_DTB=y. Sections that appear after the relocation table are not relocated on system boot (except .bss, which has special handling). With CONFIG_MIPS_ELF_APPENDED_DTB, the dtb is part of the vmlinux ELF, so it must be relocated together with everything else. Fixes: 069fd766 ("MIPS: Reserve space for relocation table") Signed-off-by:
Yasha Cherikovsky <yasha.che3@gmail.com> Signed-off-by:
-
Yifeng Li authored
commit 5f5f67da upstream. Timekeeping IRQs from CS5536 MFGPT are routed to i8259, which then triggers the "cascade" IRQ on MIPS CPU. Without IRQF_NO_SUSPEND in cascade_irqaction, MFGPT interrupts will be masked in suspend mode, and the machine would be unable to resume once suspended. Previously, MIPS IRQs were not disabled properly, so the original code appeared to work. Commit a3e6c1ef ("MIPS: IRQ: Fix disable_irq on CPU IRQs") uncovers the bug. To fix it, add IRQF_NO_SUSPEND to cascade_irqaction. This commit is functionally identical to 0add9c2f ("MIPS: Loongson-3: Add IRQF_NO_SUSPEND to Cascade irqaction"), but it forgot to apply the same fix to Loongson2. Signed-off-by:
Yifeng Li <tomli@tomli.me> Signed-off-by:
-
Jan Kara authored
commit d3ca4651 upstream. When truncate(2) hits IO error when reading indirect extent block the code just bugs with: kernel BUG at linux-4.15.0/fs/udf/truncate.c:249! ... Fix the problem by bailing out cleanly in case of IO error. CC: stable@vger.kernel.org Reported-by:
jean-luc malet <jeanluc.malet@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
commit bb229bbb upstream. Because map updates are distributed lazily, an OSD may not know about the new blacklist for quite some time after "osd blacklist add" command is completed. This makes it possible for a blacklisted but still alive client to overwrite a post-blacklist update, resulting in data corruption. Waiting for latest osdmap in ceph_monc_blacklist_add() and thus using the post-blacklist epoch for all post-blacklist requests ensures that all such requests "wait" for the blacklist to come into force on their respective OSDs. Cc: stable@vger.kernel.org Fixes: 6305a3b4 ("libceph: support for blacklisting clients") Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Reviewed-by:
Jason Dillaman <dillaman@redhat.com> Signed-off-by:
-
Stanislaw Gruszka authored
commit 4e50ce03 upstream. Take into account that sg->offset can be bigger than PAGE_SIZE when setting segment sg->dma_address. Otherwise sg->dma_address will point at diffrent page, what makes DMA not possible with erros like this: xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa70c0 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7040 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7080 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7100 flags=0x0020] xhci_hcd 0000:38:00.3: AMD-Vi: Event logged [IO_PAGE_FAULT domain=0x0000 address=0x00000000fdaa7000 flags=0x0020] Additinally with wrong sg->dma_address unmap_sg will free wrong pages, what what can cause crashes like this: Feb 28 19:27:45 kernel: BUG: Bad page state in process cinnamon pfn:39e8b1 Feb 28 19:27:45 kernel: Disabling lock debugging due to kernel taint Feb 28 19:27:45 kernel: flags: 0x2ffff0000000000() Feb 28 19:27:45 kernel: raw: 02ffff0000000000 0000000000000000 ffffffff00000301 0000000000000000 Feb 28 19:27:45 kernel: raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 Feb 28 19:27:45 kernel: page dumped because: nonzero _refcount Feb 28 19:27:45 kernel: Modules linked in: ccm fuse arc4 nct6775 hwmon_vid amdgpu nls_iso8859_1 nls_cp437 edac_mce_amd vfat fat kvm_amd ccp rng_core kvm mt76x0u mt76x0_common mt76x02_usb irqbypass mt76_usb mt76x02_lib mt76 crct10dif_pclmul crc32_pclmul chash mac80211 amd_iommu_v2 ghash_clmulni_intel gpu_sched i2c_algo_bit ttm wmi_bmof snd_hda_codec_realtek snd_hda_codec_generic drm_kms_helper snd_hda_codec_hdmi snd_hda_intel drm snd_hda_codec aesni_intel snd_hda_core snd_hwdep aes_x86_64 crypto_simd snd_pcm cfg80211 cryptd mousedev snd_timer glue_helper pcspkr r8169 input_leds realtek agpgart libphy rfkill snd syscopyarea sysfillrect sysimgblt fb_sys_fops soundcore sp5100_tco k10temp i2c_piix4 wmi evdev gpio_amdpt pinctrl_amd mac_hid pcc_cpufreq acpi_cpufreq sg ip_tables x_tables ext4(E) crc32c_generic(E) crc16(E) mbcache(E) jbd2(E) fscrypto(E) sd_mod(E) hid_generic(E) usbhid(E) hid(E) dm_mod(E) serio_raw(E) atkbd(E) libps2(E) crc32c_intel(E) ahci(E) libahci(E) libata(E) xhci_pci(E) xhci_hcd(E) Feb 28 19:27:45 kernel: scsi_mod(E) i8042(E) serio(E) bcache(E) crc64(E) Feb 28 19:27:45 kernel: CPU: 2 PID: 896 Comm: cinnamon Tainted: G B W E 4.20.12-arch1-1-custom #1 Feb 28 19:27:45 kernel: Hardware name: To Be Filled By O.E.M. To Be Filled By O.E.M./B450M Pro4, BIOS P1.20 06/26/2018 Feb 28 19:27:45 kernel: Call Trace: Feb 28 19:27:45 kernel: dump_stack+0x5c/0x80 Feb 28 19:27:45 kernel: bad_page.cold.29+0x7f/0xb2 Feb 28 19:27:45 kernel: __free_pages_ok+0x2c0/0x2d0 Feb 28 19:27:45 kernel: skb_release_data+0x96/0x180 Feb 28 19:27:45 kernel: __kfree_skb+0xe/0x20 Feb 28 19:27:45 kernel: tcp_recvmsg+0x894/0xc60 Feb 28 19:27:45 kernel: ? reuse_swap_page+0x120/0x340 Feb 28 19:27:45 kernel: ? ptep_set_access_flags+0x23/0x30 Feb 28 19:27:45 kernel: inet_recvmsg+0x5b/0x100 Feb 28 19:27:45 kernel: __sys_recvfrom+0xc3/0x180 Feb 28 19:27:45 kernel: ? handle_mm_fault+0x10a/0x250 Feb 28 19:27:45 kernel: ? syscall_trace_enter+0x1d3/0x2d0 Feb 28 19:27:45 kernel: ? __audit_syscall_exit+0x22a/0x290 Feb 28 19:27:45 kernel: __x64_sys_recvfrom+0x24/0x30 Feb 28 19:27:45 kernel: do_syscall_64+0x5b/0x170 Feb 28 19:27:45 kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9 Cc: stable@vger.kernel.org Reported-and-tested-by:
Jan Viktorin <jan.viktorin@gmail.com> Reviewed-by:
Alexander Duyck <alexander.h.duyck@linux.intel.com> Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Fixes: 80187fd3 ('iommu/amd: Optimize map_sg and unmap_sg') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
-
Deepak Rawat authored
commit 4b9ce3a6 upstream. If it's not a system error and get_node implementation accommodate the buffer object then it should return 0 with memm::mm_node set to NULL. v2: Test for id != -ENOMEM instead of id == -ENOSPC. Cc: <stable@vger.kernel.org> Fixes: 4eb085e4 ("drm/vmwgfx: Convert to new IDA API") Signed-off-by:
Deepak Rawat <drawat@vmware.com> Reviewed-by:
Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by:
-
Thomas Zimmermann authored
commit c2d31155 upstream. When calling vmw_fb_set_par(), the mode stored in par->set_mode gets free'd twice. The first free is in vmw_fb_kms_detach(), the second is near the end of vmw_fb_set_par() under the name of 'old_mode'. The mode-setting code only works correctly if the mode doesn't actually change. Removing 'old_mode' in favor of using par->set_mode directly fixes the problem. Cc: <stable@vger.kernel.org> Fixes: a278724a ("drm/vmwgfx: Implement fbdev on kms v2") Signed-off-by:
Thomas Zimmermann <tzimmermann@suse.de> Reviewed-by:
-
Wolfram Sang authored
commit c9a9497c upstream. R-Car Gen2 has two different SDHI incarnations in the same chip. The older one does not support the recently introduced 32 bit register access to the block count register. Make sure we use this feature only after the first known version. Thanks to the Renesas Testing team for this bug report! Fixes: 5603731a ("mmc: tmio: fix access width of Block Count Register") Reported-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by:
Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by:
Simon Horman <horms+renesas@verge.net.au> Tested-by:
Phong Hoang <phong.hoang.wz@renesas.com> Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Alexander Shiyan authored
commit 2b77158f upstream. This reverts commit b189e758. Unable to handle kernel paging request at virtual address c8358000 pgd = efa405c3 [c8358000] *pgd=00000000 Internal error: Oops: 805 [#1] PREEMPT ARM CPU: 0 PID: 711 Comm: kworker/0:2 Not tainted 4.20.0+ #30 Hardware name: Freescale i.MX27 (Device Tree Support) Workqueue: events mxcmci_datawork PC is at mxcmci_datawork+0xbc/0x2ac LR is at mxcmci_datawork+0xac/0x2ac pc : [<c04e33c8>] lr : [<c04e33b8>] psr: 60000013 sp : c6c93f08 ip : 24004180 fp : 00000008 r10: c8358000 r9 : c78b3e24 r8 : c6c92000 r7 : 00000000 r6 : c7bb8680 r5 : c7bb86d4 r4 : c78b3de0 r3 : 00002502 r2 : c090b2e0 r1 : 00000880 r0 : 00000000 Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 0005317f Table: a68a8000 DAC: 00000055 Process kworker/0:2 (pid: 711, stack limit = 0x389543bc) Stack: (0xc6c93f08 to 0xc6c94000) 3f00: c7bb86d4 00000000 00000000 c6cbfde0 c7bb86d4 c7ee4200 3f20: 00000000 c0907ea8 00000000 c7bb86d8 c0907ea8 c012077c c6cbfde0 c7bb86d4 3f40: c6cbfde0 c6c92000 c6cbfdf4 c09280ba c0907ea8 c090b2e0 c0907ebc c0120c18 3f60: c6cbfde0 00000000 00000000 c6cbb580 c7ba7c40 c7837edc c6cbb598 00000000 3f80: c6cbfde0 c01208f8 00000000 c01254fc c7ba7c40 c0125400 00000000 00000000 3fa0: 00000000 00000000 00000000 c01010d0 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [<c04e33c8>] (mxcmci_datawork) from [<c012077c>] (process_one_work+0x1f0/0x338) [<c012077c>] (process_one_work) from [<c0120c18>] (worker_thread+0x320/0x474) [<c0120c18>] (worker_thread) from [<c01254fc>] (kthread+0xfc/0x118) [<c01254fc>] (kthread) from [<c01010d0>] (ret_from_fork+0x14/0x24) Exception stack(0xc6c93fb0 to 0xc6c93ff8) 3fa0: 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 Code: e3500000 1a000059 e5153050 e5933038 (e48a3004) ---[ end trace 54ca629b75f0e737 ]--- note: kworker/0:2[711] exited with preempt_count 1 Signed-off-by:
Alexander Shiyan <shc_work@mail.ru> Fixes: b189e758 ("mmc: mxcmmc: handle highmem pages") Cc: stable@vger.kernel.org Signed-off-by:
-
Arnd Bergmann authored
commit e60a582b upstream. clang points out several instances of mismatched types in this drivers, all coming from a single declaration: drivers/mmc/host/pxamci.c:193:15: error: implicit conversion from enumeration type 'enum dma_transfer_direction' to different enumeration type 'enum dma_data_direction' [-Werror,-Wenum-conversion] direction = DMA_DEV_TO_MEM; ~ ^~~~~~~~~~~~~~ drivers/mmc/host/pxamci.c:212:62: error: implicit conversion from enumeration type 'enum dma_data_direction' to different enumeration type 'enum dma_transfer_direction' [-Werror,-Wenum-conversion] tx = dmaengine_prep_slave_sg(chan, data->sg, host->dma_len, direction, The behavior is correct, so this must be a simply typo from dma_data_direction and dma_transfer_direction being similarly named types with a similar purpose. Fixes: 6464b714 ("mmc: pxamci: switch over to dmaengine use") Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Acked-by:
-
Takashi Sakamoto authored
commit 2d012c65 upstream. Current ALSA firewire-motu driver uses the value of 'model' field of unit directory in configuration ROM for modalias for MOTU FireWire models. However, as long as I checked, Pre8 and 828mk3(Hybrid) have the same value for the field (=0x100800). unit | version | model --------------- | --------- | ---------- 828mkII | 0x000003 | 0x101800 Traveler | 0x000009 | 0x107800 Pre8 | 0x00000f | 0x100800 <- 828mk3(FW) | 0x000015 | 0x106800 AudioExpress | 0x000033 | 0x104800 828mk3(Hybrid) | 0x000035 | 0x100800 <- When updating firmware for MOTU 8pre FireWire from v1.0.0 to v1.0.3, I got change of the value from 0x100800 to 0x103800. On the other hand, the value of 'version' field is fixed to 0x00000f. As a quick glance, the higher 12 bits of the value of 'version' field represent firmware version, while the lower 12 bits is unknown. By induction, the value of 'version' field represents actual model. This commit changes modalias to match the value of 'version' field, instead of 'model' field. For degug, long name of added sound card includes hexadecimal value of 'model' field. Fixes: 6c5e1ac0 ("ALSA: firewire-motu: add support for Motu Traveler") Signed-off-by:
Takashi Sakamoto <o-takashi@sakamocchi.jp> Cc: <stable@vger.kernel.org> # v4.19+ Signed-off-by:
-
Jaroslav Kysela authored
commit 721f1e6c upstream. Another machine which does not like the power saving (noise): https://bugzilla.redhat.com/show_bug.cgi?id=1689623 Also, reorder the Lenovo C50 entry to keep the table sorted. Reported-by: hs.guimaraes@outlook.com Signed-off-by:
Jaroslav Kysela <perex@perex.cz> Cc: <stable@vger.kernel.org> Signed-off-by:
-
- 23 Mar, 2019 8 commits
-
-
Greg Kroah-Hartman authored
-
Martin Schwidefsky authored
commit 86a86804 upstream. The fix to make WARN work in the early boot code created a problem on older machines without EDAT-1. The setup_lowcore_dat_on function uses the pointer from lowcore_ptr[0] to set the DAT bit in the new PSWs. That does not work if the kernel page table is set up with 4K pages as the prefix address maps to absolute zero. To make this work the PSWs need to be changed with via address 0 in form of the S390_lowcore definition. Reported-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Cornelia Huck <cohuck@redhat.com> Fixes: 94f85ed3e2f8 ("s390/setup: fix early warning messages") Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by:
-
Coly Li authored
commit dc7292a5 upstream. In 'commit 752f66a7 ("bcache: use REQ_PRIO to indicate bio for metadata")' REQ_META is replaced by REQ_PRIO to indicate metadata bio. This assumption is not always correct, e.g. XFS uses REQ_META to mark metadata bio other than REQ_PRIO. This is why Nix noticed that bcache does not cache metadata for XFS after the above commit. Thanks to Dave Chinner, he explains the difference between REQ_META and REQ_PRIO from view of file system developer. Here I quote part of his explanation from mailing list, REQ_META is used for metadata. REQ_PRIO is used to communicate to the lower layers that the submitter considers this IO to be more important that non REQ_PRIO IO and so dispatch should be expedited. IOWs, if the filesystem considers metadata IO to be more important that user data IO, then it will use REQ_PRIO | REQ_META rather than just REQ_META. Then it seems bios with REQ_META or REQ_PRIO should both be cached for performance optimation, because they are all probably low I/O latency demand by upper layer (e.g. file system). So in this patch, when we want to decide whether to bypass the cache, REQ_META and REQ_PRIO are both checked. Then both metadata and high priority I/O requests will be handled properly. Reported-by:
Nix <nix@esperi.org.uk> Signed-off-by:
Coly Li <colyli@suse.de> Reviewed-by:
Andre Noll <maan@tuebingen.mpg.de> Tested-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Sean Christopherson authored
commit 34333cc6 upstream. Regarding segments with a limit==0xffffffff, the SDM officially states: When the effective limit is FFFFFFFFH (4 GBytes), these accesses may or may not cause the indicated exceptions. Behavior is implementation-specific and may vary from one execution to another. In practice, all CPUs that support VMX ignore limit checks for "flat segments", i.e. an expand-up data or code segment with base=0 and limit=0xffffffff. This is subtly different than wrapping the effective address calculation based on the address size, as the flat segment behavior also applies to accesses that would wrap the 4g boundary, e.g. a 4-byte access starting at 0xffffffff will access linear addresses 0xffffffff, 0x0, 0x1 and 0x2. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Sean Christopherson authored
commit 8570f9e8 upstream. The address size of an instruction affects the effective address, not the virtual/linear address. The final address may still be truncated, e.g. to 32-bits outside of long mode, but that happens irrespective of the address size, e.g. a 32-bit address size can yield a 64-bit virtual address when using FS/GS with a non-zero base. Fixes: 064aea77 ("KVM: nVMX: Decoding memory operands of VMX instructions") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
commit 946c522b upstream. The VMCS.EXIT_QUALIFCATION field reports the displacements of memory operands for various instructions, including VMX instructions, as a naturally sized unsigned value, but masks the value by the addr size, e.g. given a ModRM encoded as -0x28(%ebp), the -0x28 displacement is reported as 0xffffffd8 for a 32-bit address size. Despite some weird wording regarding sign extension, the SDM explicitly states that bits beyond the instructions address size are undefined: In all cases, bits of this field beyond the instructionâ€
™ s address size are undefined. Failure to sign extend the displacement results in KVM incorrectly treating a negative displacement as a large positive displacement when the address size of the VMX instruction is smaller than KVM's native size, e.g. a 32-bit address size on a 64-bit KVM. The very original decoding, added by commit 064aea77 ("KVM: nVMX: Decoding memory operands of VMX instructions"), sort of modeled sign extension by truncating the final virtual/linear address for a 32-bit address size. I.e. it messed up the effective address but made it work by adjusting the final address. When segmentation checks were added, the truncation logic was kept as-is and no sign extension logic was introduced. In other words, it kept calculating the wrong effective address while mostly generating the correct virtual/linear address. As the effective address is what's used in the segment limit checks, this results in KVM incorreclty injecting #GP/#SS faults due to non-existent segment violations when a nested VMM uses negative displacements with an address size smaller than KVM's native address size. Using the -0x28(%ebp) example, an EBP value of 0x1000 will result in KVM using 0x100000fd8 as the effective address when checking for a segment limit violation. This causes a 100% failure rate when running a 32-bit KVM build as L1 on top of a 64-bit KVM L0. Fixes: f9eb4af6 ("KVM: nVMX: VMX instructions: add checks for #GP/#SS exceptions") Cc: stable@vger.kernel.org Signed-off-by: -
Sean Christopherson authored
commit ddfd1730 upstream. When installing new memslots, KVM sets bit 0 of the generation number to indicate that an update is in-progress. Until the update is complete, there are no guarantees as to whether a vCPU will see the old or the new memslots. Explicity prevent caching MMIO accesses so as to avoid using an access cached from the old memslots after the new memslots have been installed. Note that it is unclear whether or not disabling caching during the update window is strictly necessary as there is no definitive documentation as to what ordering guarantees KVM provides with respect to updating memslots. That being said, the MMIO spte code does not allow reusing sptes created while an update is in-progress, and the associated documentation explicitly states: We do not want to use an MMIO sptes created with an odd generation number, ... If KVM is unlucky and creates an MMIO spte while the low bit is 1, the next access to the spte will always be a cache miss. At the very least, disabling the per-vCPU MMIO cache during updates will make its behavior consistent with the MMIO spte behavior and documentation. Fixes: 56f17dd3 ("kvm: x86: fix stale mmio cache bug") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Sean Christopherson authored
commit e1359e2b upstream. The check to detect a wrap of the MMIO generation explicitly looks for a generation number of zero. Now that unique memslots generation numbers are assigned to each address space, only address space 0 will get a generation number of exactly zero when wrapping. E.g. when address space 1 goes from 0x7fffe to 0x80002, the MMIO generation number will wrap to 0x2. Adjust the MMIO generation to strip the address space modifier prior to checking for a wrap. Fixes: 4bd518f1 ("KVM: use separate generations for each address space") Cc: <stable@vger.kernel.org> Signed-off-by:
-
