- 03 Feb, 2021 40 commits
-
-
Brian Vazquez authored
This patch avoids the indirect call for the common case: ip6_mtu and ipv4_mtu Signed-off-by:
Brian Vazquez <brianvv@google.com> Signed-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Brian Vazquez authored
This patch avoids the indirect call for the common case: ip6_output and ip_output Signed-off-by:
-
Brian Vazquez authored
This patch avoids the indirect call for the common case: ip_local_deliver and ip6_input Signed-off-by:
-
Emil Renner Berthing authored
This converts the driver to use the new tasklet API introduced in commit 12cc923f ("tasklet: Introduce new initialization API") It is unfortunate that we need to add a pointer to the driver context to get back to the usbnet device, but the space will be reclaimed once there are no more users of the old API left and we can remove the data value and flag from the tasklet struct. Signed-off-by:
Emil Renner Berthing <kernel@esmil.dk> Link: https://lore.kernel.org/r/20210130234637.26505-1-kernel@esmil.dkSigned-off-by:
-
Geert Uytterhoeven authored
If CONFIG_M5272=y: drivers/net/ethernet/freescale/fec_main.c: In function ‘fec_restart’: drivers/net/ethernet/freescale/fec_main.c:948:6: warning: unused variable ‘val’ [-Wunused-variable] 948 | u32 val; | ^~~ drivers/net/ethernet/freescale/fec_main.c: In function ‘fec_get_mac’: drivers/net/ethernet/freescale/fec_main.c:1667:28: warning: unused variable ‘pdata’ [-Wunused-variable] 1667 | struct fec_platform_data *pdata = dev_get_platdata(&fep->pdev->dev); | ^~~~~ Fix this by moving the variable declarations inside the existing #ifdef blocks. Signed-off-by:Geert Uytterhoeven <geert@linux-m68k.org> Reviewed-by:
Guenter Roeck <linux@roeck-us.net> Link: https://lore.kernel.org/r/20210202130650.865023-1-geert@linux-m68k.orgSigned-off-by:
-
Eric Dumazet authored
inet_gro_receive() and inet_gro_complete() are part of GRO engine which can not be modular. Similarly, inet_gso_segment() does not need to be exported, being part of GSO stack. In other words, net/ipv6/ip6_offload.o is part of vmlinux, regardless of CONFIG_IPV6. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Leon Romanovsky <leonro@nvidia.com> Link: https://lore.kernel.org/r/20210202154145.1568451-1-eric.dumazet@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'mac80211-next-for-net-next-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== This time, only RTNL locking reduction fallout. - cfg80211_dev_rename() requires RTNL - cfg80211_change_iface() and cfg80211_set_encryption() require wiphy mutex (was missing in wireless extensions) - cfg80211_destroy_ifaces() requires wiphy mutex - netdev registration can fail due to notifiers, and then notifiers are "unrolled", need to handle this properly * tag 'mac80211-next-for-net-next-2021-02-02' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next: cfg80211: fix netdev registration deadlock cfg80211: call cfg80211_destroy_ifaces() with wiphy lock held wext: call cfg80211_set_encryption() with wiphy lock held wext: call cfg80211_change_iface() with wiphy lock held nl80211: call cfg80211_dev_rename() under RTNL ==================== Link: https://lore.kernel.org/r/20210202144106.38207-1-johannes@sipsolutions.netSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linuxJakub Kicinski authored
Saeed Mahameed says: ==================== mlx5-updates-2021-02-01 mlx5 netdev updates: 1) Trivial refactoring ahead of the upcoming uplink representor series. 2) Increased RSS table size to 256, for better results 3) Misc. Cleanup and very trivial improvements * tag 'mlx5-updates-2021-02-01' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux: net/mlx5: DR, Avoid unnecessary csum recalculation on supporting devices net/mlx5e: CT: remove useless conversion to PTR_ERR then ERR_PTR net/mlx5e: accel, remove redundant space net/mlx5e: kTLS, Improve TLS RX workqueue scope net/mlx5e: remove h from printk format specifier net/mlx5e: Increase indirection RQ table size to 256 net/mlx5e: Enable napi in channel's activation stage net/mlx5e: Move representor neigh init into profile enable net/mlx5e: Avoid false lock depenency warning on tc_ht net/mlx5e: Move set vxlan nic info to profile init net/mlx5e: Move netif_carrier_off() out of mlx5e_priv_init() net/mlx5e: Refactor mlx5e_netdev_init/cleanup to mlx5e_priv_init/cleanup net/mxl5e: Add change profile method net/mlx5e: Separate between netdev objects and mlx5e profiles initialization ==================== Link: https://lore.kernel.org/r/20210202065457.613312-1-saeed@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Mat Martineau says: ==================== mptcp: ADD_ADDR enhancements This patch series from the MPTCP tree contains enhancements and associated tests for the ADD_ADDR ("add address") MPTCP option. This option allows already-connected MPTCP peers to share additional IP addresses with each other, which can then be used to create additional subflows within those MPTCP connections. Patches 1 & 2 remove duplicated data in the per-connection path manager structure. Patches 3-6 initiate additional subflows when an address is added using the netlink path manager interface and improve ADD_ADDR signaling reliability, subject to configured limits. Self tests are also updated. Patches 7-15 add new support for optional port numbers in ADD_ADDR. This includes creating an additional in-kernel TCP listening socket for the requested port number, validating the port number when processing incoming subflow connections, including the port number in netlink interfaces, and adding some new MIBs. New self test cases are added for subflows connecting with alternate port numbers. ==================== Link: https://lore.kernel.org/r/20210201230920.66027-1-mathew.j.martineau@linux.intel.comSigned-off-by: -
Geliang Tang authored
This patch adds testcases for ADD_ADDR with port and the related MIB counters check in chk_add_nr. The output looks like this: 24 signal address with port syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] - pt [ ok ] syn[ ok ] - synack[ ok ] - ack[ ok ] syn[ ok ] - ack [ ok ] 25 subflow and signal with port syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] - pt [ ok ] syn[ ok ] - synack[ ok ] - ack[ ok ] syn[ ok ] - ack [ ok ] 26 remove single address with port syn[ ok ] - synack[ ok ] - ack[ ok ] add[ ok ] - echo [ ok ] - pt [ ok ] syn[ ok ] - synack[ ok ] - ack[ ok ] syn[ ok ] - ack [ ok ] rm [ ok ] - sf [ ok ] Signed-off-by:Geliang Tang <geliangtang@gmail.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Geliang Tang authored
This patch adds the mibs for ADD_ADDR with port: MPTCP_MIB_PORTADD for received ADD_ADDR suboption with a port number. MPTCP_MIB_PORTSYNRX, MPTCP_MIB_PORTSYNACKRX, MPTCP_MIB_PORTACKRX, for received MP_JOIN's SYN or SYN/ACK or ACK with a port number which is different from the msk's port number. MPTCP_MIB_MISMATCHPORTSYNRX and MPTCP_MIB_MISMATCHPORTACKRX, for received SYN or ACK MP_JOIN with a mismatched port-number. Signed-off-by:
-
Geliang Tang authored
This patch adds a new argument for pm_nl_ctl tool. We can use it like this: # pm_nl_ctl add 10.0.2.1 flags signal port 10100 # pm_nl_ctl dump id 1 flags signal 10.0.2.1 10100 Signed-off-by:
-
Geliang Tang authored
This patch adds MPTCP_PM_ADDR_ATTR_PORT filling and parsing in PM netlink. Signed-off-by:
-
Geliang Tang authored
When dealing with the addresses list local_addr_list or anno_list, we should enable the function addresses_equal's parameter use_port. And enable it in address_zero too. Signed-off-by:
-
Geliang Tang authored
This patch adds two new helpers, subflow_use_different_sport and subflow_use_different_dport, to check whether the subflow's source or destination port number is different from the msk's port number. When receiving the MP_JOIN's SYN/SYNACK/ACK, we do these port number checks and print out the different port numbers. And furthermore, when receiving the MP_JOIN's SYN/ACK, we also use a new helper mptcp_pm_sport_in_anno_list to check whether this port number is announced. If it isn't, we need to abort this connection. This patch also populates the local address's port field in local_address. Signed-off-by:
-
Geliang Tang authored
This patch adds a new helper named subflow_req_create_thmac, which is extracted from subflow_token_join_request. It initializes subflow_req's local_nonce and thmac fields, those are the more expensive to populate. Signed-off-by:
-
Geliang Tang authored
This patch drops the unused parameter skb in subflow_token_join_request. Signed-off-by:
-
Geliang Tang authored
This patch creates a listening socket when an address with a port-number is added by PM netlink. Then binds the new port to the socket, and listens for new connections. When the address is removed or the addresses are flushed by PM netlink, release the listening socket. Signed-off-by:
-
Geliang Tang authored
This patch adds testcases to create subflows or signal addresses for the newly added IPv4 or IPv6 addresses. Signed-off-by:
-
Geliang Tang authored
This patch changes the removing addresses numbers to minus values, left the plus values for the adding addresses numbers. Signed-off-by:
-
Geliang Tang authored
This patch changes the sending ACK conditions for the ADD_ADDR, send an ACK packet for any ADD_ADDR, not just when ipv6 addresses or port numbers are included. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/139Acked-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Geliang Tang authored
Currently, when a new MPTCP endpoint is added, the existing MPTCP sockets are not affected. This patch implements a new function mptcp_nl_add_subflow_or_signal_addr, invoked when an address is added from PM netlink. This function traverses the MPTCP sockets list and invokes mptcp_pm_create_subflow_or_signal_addr to try to create a subflow or signal an address for the newly added address, if local constraint allows that. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/19Signed-off-by:
-
Geliang Tang authored
This patch drops the per-msk values add_addr_signal_max, add_addr_accept_max, local_addr_max and subflows_max fields in struct mptcp_pm_data, uses the pernet *_max values instead. And adds four new helpers to get the pernet *_max values separately. Co-developed-by:
Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by:
-
Geliang Tang authored
This patch uses WRITE_ONCE() for all the pernet add_addr_signal_max, add_addr_accept_max, local_addr_max and subflows_max fields in struct pm_nl_pernet to avoid concurrency issues. Signed-off-by:
-
Kai-Heng Feng authored
According to the vendor driver, the new chip with XID 0x54b is essentially the same as the one with XID 0x54a, but it doesn't need the firmware. So add support accordingly. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20210202044813.1304266-1-kai.heng.feng@canonical.comSigned-off-by:
-
Jakub Kicinski authored
Ido Schimmel says: ==================== Add notifications when route hardware flags change Routes installed to the kernel can be programmed to capable devices, in which case they are marked with one of two flags. RTM_F_OFFLOAD for routes that offload traffic from the kernel and RTM_F_TRAP for routes that trap packets to the kernel for processing (e.g., host routes). These flags are of interest to routing daemons since they would like to delay advertisement of routes until they are installed in hardware. This allows them to avoid packet loss or misrouted packets. Currently, routing daemons do not receive any notifications when these flags are changed, requiring them to poll the kernel tables for changes which is inefficient. This series addresses the issue by having the kernel emit RTM_NEWROUTE notifications whenever these flags change. The behavior is controlled by two sysctls (net.ipv4.fib_notify_on_flag_change and net.ipv6.fib_notify_on_flag_change) that default to 0 (no notifications). Note that even if route installation in hardware is improved to be more synchronous, these notifications are still of interest. For example, a multipath route can change from RTM_F_OFFLOAD to RTM_F_TRAP if its neighbours become invalid. A routing daemon can choose to withdraw / replace the route in that case. In addition, the deletion of a route from the kernel can prompt the installation of an identical route (already in kernel, with an higher metric) to hardware. For testing purposes, netdevsim is aligned to simulate a "real" driver that programs routes to hardware. Series overview: Patches #1-#2 align netdevsim to perform route programming in a non-atomic context Patches #3-#5 add sysctl to control IPv4 notifications Patches #6-#8 add sysctl to control IPv6 notifications Patch #9 extends existing fib tests to set sysctls before running tests Patch #10 adds test for fib notifications over netdevsim ==================== Link: https://lore.kernel.org/r/20210201194757.3463461-1-idosch@idosch.orgSigned-off-by:
-
Amit Cohen authored
Add test to check fib notifications behavior. The test checks route addition, route deletion and route replacement for both IPv4 and IPv6. When fib_notify_on_flag_change=0, expect single notification for route addition/deletion/replacement. When fib_notify_on_flag_change=1, expect: - two notification for route addition/replacement, first without RTM_F_TRAP and second with RTM_F_TRAP. - single notification for route deletion. $ ./fib_notifications.sh TEST: IPv4 route addition [ OK ] TEST: IPv4 route deletion [ OK ] TEST: IPv4 route replacement [ OK ] TEST: IPv6 route addition [ OK ] TEST: IPv6 route deletion [ OK ] TEST: IPv6 route replacement [ OK ] Signed-off-by:
Amit Cohen <amcohen@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Amit Cohen authored
Run the test cases with both `fib_notify_on_flag_change` sysctls set to '1', and then with both sysctls set to '0' to verify there are no regressions in the test when notifications are added. Signed-off-by:
-
Amit Cohen authored
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Move fib6_info_hw_flags_set() to C file because it is no longer a short function. Signed-off-by:
-
Amit Cohen authored
With the next patch mlxsw and netdevsim will fail in compilation if CONFIG_IPV6 is disabled. Do not call fib6_info_hw_flags_set() when IPv6 is disabled. Signed-off-by:
-
Amit Cohen authored
The next patch will emit notification when hardware flags are changed, in case that fib_notify_on_flag_change sysctl is set to 1. To know sysctl values, net struct is needed. This change is consistent with the IPv4 version, which gets 'net' struct as its first argument. Currently, the only callers of this function are mlxsw and netdevsim. Patch the callers to pass net. Signed-off-by:
-
Amit Cohen authored
After installing a route to the kernel, user space receives an acknowledgment, which means the route was installed in the kernel, but not necessarily in hardware. The asynchronous nature of route installation in hardware can lead to a routing daemon advertising a route before it was actually installed in hardware. This can result in packet loss or mis-routed packets until the route is installed in hardware. It is also possible for a route already installed in hardware to change its action and therefore its flags. For example, a host route that is trapping packets can be "promoted" to perform decapsulation following the installation of an IPinIP/VXLAN tunnel. Emit RTM_NEWROUTE notifications whenever RTM_F_OFFLOAD/RTM_F_TRAP flags are changed. The aim is to provide an indication to user-space (e.g., routing daemons) about the state of the route in hardware. Introduce a sysctl that controls this behavior. Keep the default value at 0 (i.e., do not emit notifications) for several reasons: - Multiple RTM_NEWROUTE notification per-route might confuse existing routing daemons. - Convergence reasons in routing daemons. - The extra notifications will negatively impact the insertion rate. - Not all users are interested in these notifications. Signed-off-by:
Roopa Prabhu <roopa@nvidia.com> Signed-off-by:
-
Amit Cohen authored
Publish fib_nlmsg_size() to allow it to be used later on from fib_alias_hw_flags_set(). Remove the inline keyword since it shouldn't be used inside C files. Signed-off-by:
-
Amit Cohen authored
fib_dump_info() does not change 'fri', so pass it as 'const'. It will later allow us to invoke fib_dump_info() from fib_alias_hw_flags_set(). Signed-off-by:
-
Amit Cohen authored
Currently, netdevsim implements dummy FIB offload and marks notified routes with RTM_F_TRAP flag. netdevsim does not defer route notifications to a work queue because it does not need to program any hardware. Given that netdevsim's purpose is to both give an example implementation and allow developers to test their code, align netdevsim to a "real" hardware device driver like mlxsw and have it also perform the route "programming" in a non-atomic context. It will be used to test route flags notifications which will be added in the next patches. The following changes are needed when route handling is performed in WQ: - Handle the accounting in the main context, to be able to return an error for adding route when all the routes are used. For FIB_EVENT_ENTRY_REPLACE increase the counter before scheduling the delayed work, and in case that this event replaces an existing route, decrease the counter as part of the delayed work. - For IPv6, cannot use fen6_info->rt->fib6_siblings list because it might be changed during handling the delayed work. Save an array with the nexthops as part of fib6_event struct, and take a reference for each nexthop to prevent them from being freed while event is queued. - Change GFP_ATOMIC allocations to GFP_KERNEL. - Use single work item that is handling a list of ordered routes. Handling routes must be processed in the order they were submitted to avoid logical errors that could lead to unexpected failures. Signed-off-by:
-
Amit Cohen authored
When route is added/deleted, the appropriate counter is increased/decreased to maintain number of routes. User can limit the number of routes and then according to the appropriate counter, adding more routes than the limitation is forbidden. Currently, there is one lock which protects hashtable, list and accounting. Handling the counters will be performed from both atomic context and non-atomic context, while the hashtable and the list will be used only from non-atomic context and therefore will be protected by a separate lock. Protect accounting by using an atomic variable, so lock is not needed. v2: * Use atomic64_sub() in nsim_nexthop_account()'s error path Signed-off-by:
-
Jakub Kicinski authored
Alex Elder says: ==================== net: ipa: don't disable NAPI in suspend This is version 2 of a series that reworks the order in which things happen during channel stop and suspend (and start and resume), in order to address a hang that has been observed during suspend. The introductory message on the first version of the series gave some history which is omitted here. The end result of this series is that we only enable NAPI and the I/O completion interrupt on a channel when we start the channel for the first time. And we only disable them when stopping the channel "for good." In other words, NAPI and the completion interrupt remain enabled while a channel is stopped for suspend. One comment on version 1 of the series suggested *not* returning early on success in a function, instead having both success and error paths return from the same point at the end of the function block. This has been addressed in this version. In addition, this version consolidates things a little bit, but the net result of the series is exactly the same as version 1 (with the exception of the return fix mentioned above). First, patch 6 in the first version was a small step to make patch 7 easier to understand. The two have been combined now. Second, previous version moved (and for suspend/resume, eliminated) I/O completion interrupt and NAPI disable/enable control in separate steps (patches). Now both are moved around together in patch 5 and 6, which eliminates the need for the final (NAPI-only) patch. I won't repeat the patch summaries provided in v1: https://lore.kernel.org/netdev/20210129202019.2099259-1-elder@linaro.org/ Many thanks to Willem de Bruijn for his thoughtful input. ==================== Link: https://lore.kernel.org/r/20210201172850.2221624-1-elder@linaro.orgSigned-off-by:
-
Alex Elder authored
Transactions to send data for a network device can be allocated at any time up until the point the TX queue is stopped. It is possible for ipa_start_xmit() to be called in one context just before a the transmit queue is stopped in another. Update gsi_channel_trans_last() so that for TX channels the allocated and pending transaction lists are checked--in addition to the completed and polled lists--to determine the "last" transaction. This means any transaction that has been allocated before the TX queue is stopped will be allowed to complete before we conclude the channel is quiesced. Rework the function a bit to use a list pointer and gotos. Signed-off-by:
Alex Elder <elder@linaro.org> Acked-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Alex Elder authored
No completion interrupts will occur while an endpoint is suspended, nor when a channel has been stopped for suspend. So there's no need to disable the interrupt during suspend and re-enable it when resuming. Without any interrupts occurring, there is no need to disable/re-enable NAPI for channel suspend/resume either. We'll only enable NAPI and the interrupt when we first start the channel, and disable it again only when it's "really" stopped. To accomplish this, move the enable/disable calls out of __gsi_channel_start() and __gsi_channel_stop(), and into gsi_channel_start() and gsi_channel_stop() instead. Add a call to napi_synchronize() to gsi_channel_suspend(), to ensure NAPI polling is done before moving on. Signed-off-by:
-
Alex Elder authored
Disable both the I/O completion interrupt and NAPI polling on a channel *after* we successfully stop it rather than before. This ensures a completion occurring just before the channel is stopped gets processed. Enable NAPI polling and the interrupt *before* starting a channel rather than after, to be symmetric. A stopped channel won't generate any completion interrupts anyway. Enable NAPI before the interrupt and disable it afterward. Signed-off-by:
-
