- 10 Apr, 2017 1 commit
-
-
Aneesh Kumar K.V authored
For fullmm tlb flush, we do a flush with RIC_FLUSH_ALL which will invalidate all related caches (radix__tlb_flush()). Hence the pwc flush is not needed. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 04 Apr, 2017 3 commits
-
-
Matt Brown authored
New versions of OPAL have a device node /ibm,opal/firmware/exports, each property of which describes a range of memory in OPAL that Linux might want to export to userspace for debugging. This patch adds a sysfs file under 'opal/exports' for each property found there, and makes it read-only by root. Signed-off-by:
Matt Brown <matthew.brown.dev@gmail.com> [mpe: Drop counting of props, rename to attr, free on sysfs error, c'log] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Sukadev Bhattiprolu authored
When booting very large systems with a large initrd, we run out of space early in boot for either RTAS or the flattened device tree (FDT). Boot fails with messages like: Could not allocate memory for RTAS or No memory for flatten_device_tree (no room) Increasing the minimum RMA size to 512MB fixes the problem. This should not have an impact on smaller LPARs (with 256MB memory), as the firmware will cap the RMA to the memory assigned to the LPAR. Fix is based on input/discussions with Michael Ellerman. Thanks to Praveen K. Pandey for testing on a large system. Reported-by:
Praveen K. Pandey <preveen.pandey@in.ibm.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
Nvlink2 supports address translation services (ATS) allowing devices to request address translations from an mmu known as the nest MMU which is setup to walk the CPU page tables. To access this functionality certain firmware calls are required to setup and manage hardware context tables in the nvlink processing unit (NPU). The NPU also manages forwarding of TLB invalidates (known as address translation shootdowns/ATSDs) to attached devices. This patch exports several methods to allow device drivers to register a process id (PASID/PID) in the hardware tables and to receive notification of when a device should stop issuing address translation requests (ATRs). It also adds a fault handler to allow device drivers to demand fault pages in. Signed-off-by:
Alistair Popple <alistair@popple.id.au> [mpe: Fix up comment formatting, use flush_tlb_mm()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 03 Apr, 2017 6 commits
-
-
Alistair Popple authored
The pnv_pci_get_{gpu|npu}_dev functions are used to find associations between nvlink PCIe devices and standard PCIe devices. However they lacked basic sanity checking which results in NULL pointer dereferencing if they are incorrect called can be harder to spot than an explicit WARN_ON. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Alistair Popple authored
There is of_property_read_u32_index but no u64 variant. This patch adds one similar to the u32 version for u64. Signed-off-by:
Alistair Popple <alistair@popple.id.au> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Oliver O'Halloran authored
The code to fix the problem it describes was removed in commit c40785ad ("powerpc/dart: Use a cachable DART"), and it uses the stupid comment style. Away it goooooooooooooes! Signed-off-by:
Oliver O'Halloran <oohall@gmail.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Anton Blanchard authored
Early on in do_page_fault() we call store_updates_sp(), regardless of the type of exception. For an instruction miss this doesn't make sense, because we only use this information to detect if a data miss is the result of a stack expansion instruction or not. Worse still, it results in a data miss within every userspace instruction miss handler, because we try and load the very instruction we are about to install a pte for! A simple exec microbenchmark runs 6% faster on POWER8 with this fix: #include <stdlib.h> #include <stdio.h> #include <unistd.h> int main(int argc, char *argv[]) { unsigned long left = atol(argv[1]); char leftstr[16]; if (left-- == 0) return 0; sprintf(leftstr, "%ld", left); execlp(argv[0], argv[0], leftstr, NULL); perror("exec failed\n"); return 0; } Pass the number of iterations on the command line (eg 10000) and time how long it takes to execute. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
For an MCE (Machine Check Exception) that hits while in user mode MSR(PR=1), print the task info to the console MCE error log. This may help to identify an application that triggered the MCE. After this patch the MCE console looks like: Severe Machine check interrupt [Recovered] NIP: [0000000010039778] PID: 762 Comm: ebizzy Initiator: CPU Error type: SLB [Multihit] Effective address: 0000000010039778 Severe Machine check interrupt [Not recovered] NIP: [0000000010039778] PID: 763 Comm: ebizzy Initiator: CPU Error type: UE [Page table walk ifetch] Effective address: 0000000010039778 ebizzy[763]: unhandled signal 7 at 0000000010039778 nip 0000000010039778 lr 0000000010001b44 code 30004 Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Mahesh Salgaonkar authored
For D-side errors we print the load/store address that caused the machine check as 'Effective address'. But the instruction that may have caused the machine check can also be helpful, so in addition to printing the NIP, also print the kernel function name as well. After this patch the MCE console log would look like: Severe Machine check interrupt [Recovered] NIP [d00000001bc70194]: init_module+0x194/0x2b0 [bork_kernel] Initiator: CPU Error type: SLB [Parity] Effective address: d000000026de0000 Signed-off-by:
Mahesh Salgaonkar <mahesh@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 01 Apr, 2017 5 commits
-
-
Aneesh Kumar K.V authored
Not all user space application is ready to handle wide addresses. It's known that at least some JIT compilers use higher bits in pointers to encode their information. It collides with valid pointers with 512TB addresses and leads to crashes. To mitigate this, we are not going to allocate virtual address space above 128TB by default. But userspace can ask for allocation from full address space by specifying hint address (with or without MAP_FIXED) above 128TB. If hint address set above 128TB, but MAP_FIXED is not specified, we try to look for unmapped area by specified address. If it's already occupied, we look for unmapped area in *full* address space, rather than from 128TB window. This approach helps to easily make application's memory allocator aware about large address space without manually tracking allocated virtual address space. This is going to be a per mmap decision. ie, we can have some mmaps with larger addresses and other that do not. A sample memory layout looks like: 10000000-10010000 r-xp 00000000 fc:00 9057045 /home/max_addr_512TB 10010000-10020000 r--p 00000000 fc:00 9057045 /home/max_addr_512TB 10020000-10030000 rw-p 00010000 fc:00 9057045 /home/max_addr_512TB 10029630000-10029660000 rw-p 00000000 00:00 0 [heap] 7fff834a0000-7fff834b0000 rw-p 00000000 00:00 0 7fff834b0000-7fff83670000 r-xp 00000000 fc:00 9177190 /lib/powerpc64le-linux-gnu/libc-2.23.so 7fff83670000-7fff83680000 r--p 001b0000 fc:00 9177190 /lib/powerpc64le-linux-gnu/libc-2.23.so 7fff83680000-7fff83690000 rw-p 001c0000 fc:00 9177190 /lib/powerpc64le-linux-gnu/libc-2.23.so 7fff83690000-7fff836a0000 rw-p 00000000 00:00 0 7fff836a0000-7fff836c0000 r-xp 00000000 00:00 0 [vdso] 7fff836c0000-7fff83700000 r-xp 00000000 fc:00 9177193 /lib/powerpc64le-linux-gnu/ld-2.23.so 7fff83700000-7fff83710000 r--p 00030000 fc:00 9177193 /lib/powerpc64le-linux-gnu/ld-2.23.so 7fff83710000-7fff83720000 rw-p 00040000 fc:00 9177193 /lib/powerpc64le-linux-gnu/ld-2.23.so 7fffdccf0000-7fffdcd20000 rw-p 00000000 00:00 0 [stack] 1000000000000-1000000010000 rw-p 00000000 00:00 0 1ffff83710000-1ffff83720000 rw-p 00000000 00:00 0 Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Now that we use all the available virtual address range, we need to make sure we don't generate VSID such that it overlaps with the reserved vsid range. Reserved vsid range include the virtual address range used by the adjunct partition and also the VRMA virtual segment. We find the context value that can result in generating such a VSID and reserve it early in boot. We don't look at the adjunct range, because for now we disable the adjunct usage in a Linux LPAR via CAS interface. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Rewrite hash__reserve_context_id(), move the rest into pseries] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
We optmize the slice page size array copy to paca by copying only the range based on addr_limit. This will require us to not look at page size array beyond addr_limit in PACA on slb fault. To enable that copy task size to paca which will be used during slb fault. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Rename from task_size to addr_limit, consolidate #ifdefs] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
In the followup patch, we will increase the slice array size to handle 512TB range, but will limit the max addr to 128TB. Avoid doing unnecessary computation and avoid doing slice mask related operation above address limit. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
- 31 Mar, 2017 25 commits
-
-
Aneesh Kumar K.V authored
We update the hash linux page table layout such that we can support 512TB. But we limit the TASK_SIZE to 128TB. We can switch to 128TB by default without conditional because that is the max virtual address supported by other architectures. We will later add a mechanism to on-demand increase the application's effective address range to 512TB. Having the page table layout changed to accommodate 512TB makes testing large memory configuration easier with less code changes to kernel Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This doesn't have any functional change. But helps in avoiding mistakes in case the shift bit changes Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Inorder to support large effective address range (512TB), we want to increase the virtual address bits to 68. But we do have platforms like p4 and p5 that can only do 65 bit VA. We support those platforms by limiting context bits on them to 16. The protovsid -> vsid conversion is verified to work with both 65 and 68 bit va values. I also documented the restrictions in a table format as part of code comments. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
get_kernel_vsid() has a very stern comment saying that it's only valid for kernel addresses, but there's nothing in the code to enforce that. Rather than hoping our callers are well behaved, add a check and return a VSID of 0 (invalid). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Currently we use the top 4 context ids (0x7fffc-0x7ffff) for the kernel. Kernel VSIDs are built using these top context values and effective the segement ID. In subsequent patches we want to increase the max effective address to 512TB. We will achieve that by increasing the effective segment IDs there by increasing virtual address range. We will be switching to a 68bit virtual address in the following patch. But platforms like Power4 and Power5 only support a 65 bit virtual address. We will handle that by limiting the context bits to 16 instead of 19 on those platforms. That means the max context id will have a different value on different platforms. So that we don't have to deal with the kernel context ids changing between different platforms, move the kernel context ids down to use context ids 1-4. We can't use segment 0 of context-id 0, because that maps to VSID 0, which we want to keep as invalid, so we avoid context-id 0 entirely. Similarly we can't use the last segment of the maximum context, so we avoid it too. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Switch from 0-3 to 1-4 so VSID=0 remains invalid] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
Complete the split of the radix vs hash mm context initialisation. This is mostly code movement, with the exception that we now limit the context allocation to PRTB_ENTRIES - 1 on radix. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
The min and max context id values used in alloc_context_id() are currently the right values for use on hash, and happen to also be safe for use on radix. But we need to change that in a subsequent patch, so make the min/max ids parameters and pull the hash values into hsah__alloc_context_id(). Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Michael Ellerman authored
KVM wants to be able to allocate an MMU context id, which it does currently by calling __init_new_context(). We're about to rework that code, so provide a wrapper for KVM so it can not worry about the details. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
We now get output like below which is much better. [ 0.935306] good_mask low_slice: 0-15 [ 0.935360] good_mask high_slice: 0-511 Compared to [ 0.953414] good_mask:1111111111111111 - 1111111111111......... I also fixed an error with slice_dbg printing. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This structure definition need not be in a header since this is used only by slice.c file. So move it to slice.c. This also allow us to use SLICE_NUM_HIGH instead of 64. I also switch the low_slices type to u64 from u16. This doesn't have an impact on size of struct due to padding added with u16 type. This helps in using bitmap printing function for printing slice mask. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Remove the checks that TASK_SIZE_USER64 is smaller than H_PGTABLE_RANGE and USER_VSID_RANGE. In a following patch we will deliberately add support for a TASK_SIZE smaller than both ranges, so this will no longer be an error condition. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Keep the check in pgtable_64.c that we don't exceed USER_VSID_RANGE] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
We also update the function arg to struct mm_struct. Move this so that function finds the definition of struct mm_struct. No functional change in this patch. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This avoid copying the slice_mask struct as function return value Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
In followup patch we want to increase the va range which will result in us requiring high_slices to have more than 64 bits. To enable this convert high_slices to bitmap. We keep the number bits same in this patch and later change that to higher value Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> [mpe: Fold in fix to use bitmap_empty()] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
We don't support the full 57 bits of physical address and hence can overload the top bits of RPN as hash specific pte bits. Add a BUILD_BUG_ON() to enforce the relationship between H_PAGE_F_SECOND and H_PAGE_F_GIX. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> [mpe: Move the BUILD_BUG_ON() into hash_utils_64.c and comment it] Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Max value supported by hardware is 51 bits address. Radix page table define a slot of 57 bits for future expansion. We restrict the value supported in linux kernel 53 bits, so that we can use the bits between 57-53 for storing hash linux page table bits. This is done in the next patch. This will free up the software page table bits to be used for features that are needed for both hash and radix. The current hash linux page table format doesn't have any free software bits. Moving hash linux page table specific bits to top of RPN field free up the software bits for other purpose. Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Conditional PTE bit definition is confusing and results in coding error. Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Without this if firmware reports 1MB page size support we will crash trying to use 1MB as hugetlb page size. echo 300 > /sys/kernel/mm/hugepages/hugepages-1024kB/nr_hugepages kernel BUG at ./arch/powerpc/include/asm/hugetlb.h:19! ..... .... [c0000000e2c27b30] c00000000029dae8 .hugetlb_fault+0x638/0xda0 [c0000000e2c27c30] c00000000026fb64 .handle_mm_fault+0x844/0x1d70 [c0000000e2c27d70] c00000000004805c .do_page_fault+0x3dc/0x7c0 [c0000000e2c27e30] c00000000000ac98 handle_page_fault+0x10/0x30 With fix, we don't enable 1MB as hugepage size. bash-4.2# cd /sys/kernel/mm/hugepages/ bash-4.2# ls hugepages-16384kB hugepages-16777216kB Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
With this we have on powernv and pseries /proc/cpuinfo reporting timebase : 512000000 platform : PowerNV model : 8247-22L machine : PowerNV 8247-22L firmware : OPAL MMU : Hash Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
This bit is only used by radix and it is nice to follow the naming style of having bit name start with H_/R_ depending on which translation mode they are used. No functional change in this patch. Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
Define everything based on bits present in pgtable.h. This will help in easily identifying overlapping bits between hash/radix. No functional change with this patch. Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
For low slice, max addr should be less than 4G. Without limiting this correctly we will end up with a low slice mask which has 17th bit set. This is not a problem with the current code because our low slice mask is of type u16. But in later patch I am switching low slice mask to u64 type and having the 17bit set result in wrong slice mask which in turn results in mmap failures. Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Aneesh Kumar K.V authored
BOOKE code is dead code as per the Kconfig details. So make it simpler by enabling MM_SLICE only for book3s_64. The changes w.r.t nohash is just removing deadcode. W.r.t ppc64, 4k without hugetlb will now enable MM_SLICE. But that is good, because we reduce one extra variant which probably is not getting tested much. Reviewed-by:
Paul Mackerras <paulus@ozlabs.org> Signed-off-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-
Yang Shi authored
sam440ep_setup_rtc() is just called by machine_device_initcall() so make it __init. Signed-off-by:
Yang Shi <yang.shi@windriver.com> Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au>
-