- 15 May, 2019 4 commits
-
-
Boris Brezillon authored
v4l2-compliance complains that ->bus_info is empty. Signed-off-by:
Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
-
Boris Brezillon authored
This makes the function more generic so it can easily be re-used when adding support for the decoding functionality. Signed-off-by:
-
Jonas Karlman authored
Those calls are needed to restore a clean PM state when the probe fails or when the driver is unloaded such that future ->probe() calls can initialize runtime PM again. Signed-off-by:
Jonas Karlman <jonas@kwiboo.se> Signed-off-by:
-
Jonas Karlman authored
Pass -1 to video_register_device() to let the core assign the first free id instead of trying to get id 0. In practice it doesn't make a difference since video_register_device() is not strict about id requests and will anyway pick the first free id starting at the id passed in argument, and passing -1 has the same effect as passing 0. But let's comply with the API doc and pass -1 here. Signed-off-by:
-
- 08 May, 2019 11 commits
-
-
Hans Verkuil authored
cec_notifier_parse_hdmi_phandle returns an error pointer, not a NULL pointer on error. Fixes: 4d34c926: ("media: tegra_cec: use new cec_notifier_parse_hdmi_phandle helper") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Dan Carpenter authored
In vpbe_enum_outputs() we check if (temp_index >= cfg->num_outputs) but the problem is that "temp_index" can be negative. This patch changes the types to unsigned to address this array underflow bug. Fixes: 66715cdc ("[media] davinci vpbe: VPBE display driver") Signed-off-by:
"Lad, Prabhakar" <prabhakar.csengg@gmail.com> Signed-off-by:
-
Hans Verkuil authored
Rephrased the FIELD_ANY description: rather than explicitly list field values, just say 'when any field format is acceptable'. The list of FIELD values was outdated, so it was a bit confusing. The FIELD_NONE description said that 'The driver may also indicate this order when it cannot distinguish between V4L2_FIELD_TOP and V4L2_FIELD_BOTTOM'. This is false, NONE really means a full frame and userspace depends on that. So drop this line completely. There are no drivers that do this anyway. FIELD_TOP/BOTTOM/ALTERNATE indicate that the number of lines in the buffer are that of a field, not frame, so returning NONE here would cause huge problems. Finally attempt to clarify 'progressive' and 'interlaced' a little bit. Signed-off-by:
-
Rui Miguel Silva authored
When register the capture media device it is assumed that the device data is the media device. In the imx6 case is but in the imx7 is not case. The device data is the csi structure. Add the explicit argument of the media device that we want to associate with the capture device. Reported-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Rui Miguel Silva <rui.silva@linaro.org> Acked-by:
Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by:
-
Niklas Söderlund authored
Depending on which video standard is used the driver needs to setup the hardware to correctly handle fields. If stream is identified as NTSC or PAL setup field detection and propagate the field detection signal. Later versions of the datasheet have been updated to make it clear that FLD register should be set to 0 when dealing with non-interlaced field formats. Signed-off-by:
Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by:
-
Niklas Söderlund authored
Restart the CSI-2 link if the CSI-2 receiver detects an error during reception. The driver did nothing when a link error happened and the data flow simply stopped without the user knowing why. Change the driver to try and recover from errors by restarting the link and informing the user that something is not right. For obvious reasons it's not possible to recover from all errors (video source disconnected for example) but in such cases the user is at least informed of the error and the same behavior of the stopped data flow is retained. Signed-off-by:
-
Dan Carpenter authored
The "b->index" is a u32 the comes from the user in the ioctl. It hasn't been checked. We aren't supposed to use it but we're instead supposed to use the value that gets written to it when we call videobuf_dqbuf(). The videobuf_dqbuf() first memsets it to zero and then re-initializes it inside the videobuf_status() function. It's this final value which we want. Hans Verkuil pointed out that we need to check the return from videobuf_dqbuf(). I ended up doing a little cleanup related to that as well. Fixes: 72915e85 ("[media] V4L2: OMAP: VOUT: dma map and unmap v4l2 buffers in qbuf and dqbuf") Signed-off-by:
-
Philipp Zabel authored
v4l2-compliance likes to queue a buffer with field set to V4L2_FIELD_ANY and expects it to be returned corrected to a valid field. Follow vicodec in handling this in the buf_prepare callback. Signed-off-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
Eugen Hristev authored
The subsystem will free the asd memory on notifier cleanup, if the asd is added to the notifier. However the memory is freed using kfree. Thus, we cannot allocate the asd using devm_* This can lead to crashes and problems. To test this issue, just return an error at probe, but cleanup the notifier beforehand. Fixes: 10626744 ("[media] atmel-isc: add the Image Sensor Controller code") Signed-off-by:
Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by:
-
Eugen Hristev authored
In case the completion function failes, unbind will be called which will call cancel_work for awb_work. This will trigger a WARN message from the workqueue. To avoid this, move the INIT_WORK call at the start of the completion function. This way the work is always initialized, which corresponds to the 'always canceled' unbind code. Fixes: 93d4a26c ("[media] atmel-isc: add the isc pipeline function") Signed-off-by:
-
Eugen Hristev authored
This will limit the incoming pixels per frame from the sensor. Currently, the ISC will stop sampling the frame only when the vsync/hsync are detected. If we misconfigure the resolution in the sensor w.r.t. resolution in the ISC, the buffer used for DMA in the ISC will be smaller than the number of pixels that the ISC DMA engine will copy. In this case it happens that the DMA will overwrite parts of the memory which should not be written, leading to memory corruption. To avoid this situation, use the PFE CFG1 and PFE CFG2 registers, which crop the incoming frame to the resolution that we configure. This way the DMA engine will never write more data than we expect it to. Signed-off-by:
-
- 30 Apr, 2019 4 commits
-
-
Eddie James authored
Missed documenting this property in the initial commit. Signed-off-by:
Eddie James <eajames@linux.ibm.com> Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Eddie James authored
Reserved memory doesn't need to be required; system memory would work fine. Signed-off-by:
-
Eddie James authored
The reset line is toggled by enabling the clocks, so it's not necessary to manually toggle the reset as well. Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
-
Fabien Dessenne authored
During probe, return the provided errors value instead of -ENODEV. This allows the driver to be deferred probed if needed. Signed-off-by:
Fabien Dessenne <fabien.dessenne@st.com> Acked-by:
Hugues Fruchet <hugues.fruchet@st.com> Signed-off-by:
-
- 25 Apr, 2019 6 commits
-
-
Laurent Pinchart authored
Add support for the V4L2_PIX_FMT_RGBA555, V4L2_PIX_FMT_RGBX555, V4L2_PIX_FMT_ABGR555, V4L2_PIX_FMT_XBGR555, V4L2_PIX_FMT_BGRA555 and V4L2_PIX_FMT_BGRX555 formats to the VSP driver. Signed-off-by:
Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Acked-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Jacopo Mondi <jacopo@jmondi.org> Signed-off-by:
-
Laurent Pinchart authored
Add support for the V4L2_PIX_FMT_RGBA444, V4L2_PIX_FMT_RGBX444, V4L2_PIX_FMT_ABGR444, V4L2_PIX_FMT_XBGR444, V4L2_PIX_FMT_BGRA444 and V4L2_PIX_FMT_BGRX444 formats to the VSP driver. Signed-off-by:
-
Laurent Pinchart authored
Add support for the V4L2_PIX_FMT_BGRA32, V4L2_PIX_FMT_BGRX32, V4L2_PIX_FMT_RGBA32 and V4L2_PIX_FMT_RGBX32 formats to the VSP driver. Signed-off-by:
-
Laurent Pinchart authored
The V4L2 API is missing the 16-bit RGB555 formats for the RGBA, RGBX, ABGR, XBGR, BGRA and BGRX component orders. Add them, using the same 4CCs as DRM. Signed-off-by:
-
Laurent Pinchart authored
The V4L2 API is missing the 16-bit RGB4444 formats for the RGBA, RGBX, ABGR, XBGR, BGRA and BGRX component orders. Add them, using the same 4CCs as DRM. Signed-off-by:
-
Laurent Pinchart authored
The V4L2 API is missing the 32-bit RGB formats for the ABGR, XBGR, RGBA and RGBX component orders. Add them, using the same 4CCs as DRM. Signed-off-by:
-
- 22 Apr, 2019 15 commits
-
-
Hans Verkuil authored
The zoran driver has been marked deprecated for a year now without any interest to update this driver to the vb2 framework. Time to remove it altogether. Signed-off-by:
-
Neil Armstrong authored
Update the MAINTAINERS entry with the new AO-CEC driver for G12A. Signed-off-by:
Neil Armstrong <narmstrong@baylibre.com> Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A SoC embeds a second CEC controller with a totally different design. The two controller can work in the same time since the CEC line can be set to two different pins on the two controllers. This second CEC controller is documented as "AO-CEC-B", thus the registers will be named "CECB_" to differentiate with the other AO-CEC driver. Unlike the other AO-CEC controller, this one takes the Oscillator clock as input and embeds a dual-divider to provide a precise 32768Hz clock for communication. This is handled by registering a clock in the driver. Unlike the other AO-CEC controller, this controller supports setting up to 15 logical addresses and supports the signal_free_time settings in the transmit function. Unfortunately, this controller does not support "monitor" mode. Signed-off-by:
-
Neil Armstrong authored
The Amlogic G12A embeds a second CEC controller named AO-CEC-B, and the other one is AO-CEC-A described by the current bindings. The register interface is very close but the internal architecture is totally different. The other difference is the clock source, the AO-CEC-B takes the "oscin", the Always-On Oscillator clock, as input and embeds a dual-divider clock divider to provide the precise 32768Hz base clock for CEC communication. Signed-off-by:
-
Hans Verkuil authored
The CrosEC CEC driver never decremented the HDMI device refcount. CEC drivers only need the HDMI device pointer as a key in the notifier list, it never accesses the device, so there is no need to keep a reference. Signed-off-by:
-
Hans Verkuil authored
The SECO CEC driver never decremented the HDMI device refcount. CEC drivers only need the HDMI device pointer as a key in the notifier list, it never accesses the device, so there is no need to keep a reference. Signed-off-by:
-
Hans Verkuil authored
The Tegra CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by:
-
Hans Verkuil authored
The STI CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Hans Verkuil authored
The S5P CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by:
-
Hans Verkuil authored
The meson CEC driver increased the HDMI device refcount when it shouldn't. Use the new helper function to ensure that that doesn't happen and to simplify the driver code. Signed-off-by:
-
Hans Verkuil authored
Add helper function to parse the DT for the hdmi-phandle property and return the corresponding struct device pointer. It takes care to avoid increasing the device refcount since all we need is the device pointer. This pointer is used in the notifier list as a key, but it is never accessed by the CEC driver. Signed-off-by:
Wen Yang <wen.yang99@zte.com.cn> Acked-by:
-
Arnd Bergmann authored
I previously added an RC_CORE dependency here, but missed the corner case of CONFIG_VIDEO_SECO_CEC=y with CONFIG_RC_CORE=m, which still causes a link error: drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_probe': seco-cec.c:(.text+0x1b8): undefined reference to `devm_rc_allocate_device' seco-cec.c:(.text+0x2e8): undefined reference to `devm_rc_register_device' drivers/media/platform/seco-cec/seco-cec.o: In function `secocec_irq_handler': seco-cec.c:(.text+0xa2c): undefined reference to `rc_keydown' Refine the dependency to disallow building the RC subdriver in this case. This is the same logic we apply in other drivers like it. Fixes: f27dd0ad ("media: seco-cec: fix RC_CORE dependency") Cc: <stable@vger.kernel.org> # 5.1 Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Yizhuo authored
In function ts2020_set_tuner_rf(), local variable "utmp" could be uninitialized if function regmap_read() returns -EINVAL. However, this value is used in if statement and written to the register, which is potentially unsafe. Signed-off-by:
Yizhuo <yzhai003@ucr.edu> Signed-off-by:
-
YueHaibing authored
Remove .owner field if calls are used which set it automatically Generated by: scripts/coccinelle/api/platform_no_drv_owner.cocci Signed-off-by:
YueHaibing <yuehaibing@huawei.com> Signed-off-by:
-
Matthias Reichl authored
The timestamps in ir-keytable -t output showed that the Xbox DVD IR dongle decodes scancodes every 64ms. The last scancode of a longer button press is decodes 64ms after the last-but-one which indicates the decoder doesn't use a timeout but decodes on the last edge of the signal. 267.042629: lirc protocol(unknown): scancode = 0xace 267.042665: event type EV_MSC(0x04): scancode = 0xace 267.042665: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.042665: event type EV_SYN(0x00). 267.106625: lirc protocol(unknown): scancode = 0xace 267.106643: event type EV_MSC(0x04): scancode = 0xace 267.106643: event type EV_SYN(0x00). 267.170623: lirc protocol(unknown): scancode = 0xace 267.170638: event type EV_MSC(0x04): scancode = 0xace 267.170638: event type EV_SYN(0x00). 267.234621: lirc protocol(unknown): scancode = 0xace 267.234636: event type EV_MSC(0x04): scancode = 0xace 267.234636: event type EV_SYN(0x00). 267.298623: lirc protocol(unknown): scancode = 0xace 267.298638: event type EV_MSC(0x04): scancode = 0xace 267.298638: event type EV_SYN(0x00). 267.543345: event type EV_KEY(0x01) key_down: KEY_1(0x0002) 267.543345: event type EV_SYN(0x00). 267.570015: event type EV_KEY(0x01) key_up: KEY_1(0x0002) 267.570015: event type EV_SYN(0x00). Add a protocol with the repeat value and set the timeout in the driver to 10ms (to have a bit of headroom for delays) so the Xbox DVD remote performs more responsive. Signed-off-by:
Matthias Reichl <hias@horus.com> Acked-by:
Benjamin Valentin <benpicco@googlemail.com> Signed-off-by:
-
