Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

libiscsi is the only SCSI code that return BLK_EH_HANDLED, thus trying to
bypass the normal SCSI EH code.  We are going to remove this return value
at the block layer, and at least from a quick look it doesn't look too
harmful to try to send an abort for these cases, especially as the first
one should not actually be possible.  If this doesn't work out iscsi
will probably need its own eh_strategy_handler instead to just do the
right thing.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.

[While this keeps existing behavior it seems to mismatch the comment,
 maintainers please chime in!]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

By completing the request entirely in the driver we can remove the
BLK_EH_HANDLED return value and thus the split responsibility between the
driver and the block layer that has been causing trouble.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

NVMe always completes the request before returning from ->timeout, either
by polling for it, or by disabling the controller.  Return BLK_EH_DONE so
that the block layer doesn't even try to complete it again.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The BLK_EH_NOT_HANDLED implies nothing happen, but very often that
is not what is happening - instead the driver already completed the
command.  Fix the symbolic name to reflect that a little better.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This patch simplifies the timeout handling by relying on the request
reference counting to ensure the iterator is operating on an inflight
and truly timed out request. Since the reference counting prevents the
tag from being reallocated, the block layer no longer needs to prevent
drivers from completing their requests while the timeout handler is
operating on it: a driver completing a request is allowed to proceed to
the next state without additional syncronization with the block layer.

This also removes any need for generation sequence numbers since the
request lifetime is prevented from being reallocated as a new sequence
while timeout handling is operating on it.

To enables this a refcount is added to struct request so that request
users can be sure they're operating on the same request without it
changing while they're processing it.  The request's tag won't be
released for reuse until both the timeout handler and the completion
are done with it.
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: slight cleanups, added back submission side hctx lock, use cmpxchg
 for completions]
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

The block layer had been setting the state to in-flight prior to updating
the timer. This is the wrong order since the timeout handler could observe
the in-flight state with the older timeout, believing the request had
expired when in fact it is just getting started.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

As far as I can tell this function can't even be called any more, given
that ATA implements its own eh_strategy_handler with ata_scsi_error, which
never calls ->eh_timed_out.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Kernel library has a common function to match user input from sysfs
against an array of strings. Thus, replace bch_read_string_list() by
__sysfs_match_string().
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is couple of functions that are used exclusively in sysfs.c.
Move it to there and make them static.

Besides above, it will allow further clean up.

No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

There is couple of string arrays that are used exclusively in sysfs.c.
Move it to there and make them static.

Besides above, it will allow further clean up.

No functional change intended.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Coly Li <colyli@suse.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Currently bcache does not handle backing device failure, if backing
device is offline and disconnected from system, its bcache device can still
be accessible. If the bcache device is in writeback mode, I/O requests even
can success if the requests hit on cache device. That is to say, when and
how bcache handles offline backing device is undefined.

This patch tries to handle backing device offline in a rather simple way,
- Add cached_dev->status_update_thread kernel thread to update backing
  device status in every 1 second.
- Add cached_dev->offline_seconds to record how many seconds the backing
  device is observed to be offline. If the backing device is offline for
  BACKING_DEV_OFFLINE_TIMEOUT (30) seconds, set dc->io_disable to 1 and
  call bcache_device_stop() to stop the bache device which linked to the
  offline backing device.

Now if a backing device is offline for BACKING_DEV_OFFLINE_TIMEOUT seconds,
its bcache device will be removed, then user space application writing on
it will get error immediately, and handler the device failure in time.

This patch is quite simple, does not handle more complicated situations.
Once the bcache device is stopped, users need to recovery the backing
device, register and attach it manually.

Changelog:
v3: call wait_for_kthread_stop() before exits kernel thread.
v2: remove "bcache: " prefix when calling pr_warn().
v1: initial version.
Signed-off-by: Coly Li <colyli@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.com>
Cc: Michael Lyle <mlyle@lyle.org>
Cc: Junhui Tang <tang.junhui@zte.com.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

- The description of 'blocking' is missing in null_blk.txt

- The 'lightnvm' parameter has been removed in null_blk.c

This updates both in null_blk.txt.
Signed-off-by: Liu Bo <bo.liu@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Convert the S_<FOO> symbolic permissions to their octal equivalents as
using octal and not symbolic permissions is preferred by many as more
readable.

see: https://lkml.org/lkml/2016/8/2/1945

Done with automated conversion via:
$ ./scripts/checkpatch.pl -f --types=SYMBOLIC_PERMS --fix-inplace <files...>

Miscellanea:

o Wrapped modified multi-line calls to a single line where appropriate
o Realign modified multi-line calls to open parenthesis
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When the allocation process is scheduled back and the mapped hw queue is
changed, fake one extra wake up on previous queue for compensating wake
up miss, so other allocations on the previous queue won't be starved.

This patch fixes one request allocation hang issue, which can be
triggered easily in case of very low nr_request.

The race is as follows:

1) 2 hw queues, nr_requests are 2, and wake_batch is one

2) there are 3 waiters on hw queue 0

3) two in-flight requests in hw queue 0 are completed, and only two
   waiters of 3 are waken up because of wake_batch, but both the two
   waiters can be scheduled to another CPU and cause to switch to hw
   queue 1

4) then the 3rd waiter will wait for ever, since no in-flight request
   is in hw queue 0 any more.

5) this patch fixes it by the fake wakeup when waiter is scheduled to
   another hw queue

Cc: <stable@vger.kernel.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>

Modified commit message to make it clearer, and make it apply on
top of the 4.18 branch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

From 0aa2e9b921d6db71150633ff290199554f0842a8 Mon Sep 17 00:00:00 2001
From: Tejun Heo <tj@kernel.org>
Date: Wed, 23 May 2018 10:29:00 -0700

cgwb_release() punts the actual release to cgwb_release_workfn() on
system_wq.  Depending on the number of cgroups or block devices, there
can be a lot of cgwb_release_workfn() in flight at the same time.

We're periodically seeing close to 256 kworkers getting stuck with the
following stack trace and overtime the entire system gets stuck.

  [<ffffffff810ee40c>] _synchronize_rcu_expedited.constprop.72+0x2fc/0x330
  [<ffffffff810ee634>] synchronize_rcu_expedited+0x24/0x30
  [<ffffffff811ccf23>] bdi_unregister+0x53/0x290
  [<ffffffff811cd1e9>] release_bdi+0x89/0xc0
  [<ffffffff811cd645>] wb_exit+0x85/0xa0
  [<ffffffff811cdc84>] cgwb_release_workfn+0x54/0xb0
  [<ffffffff810a68d0>] process_one_work+0x150/0x410
  [<ffffffff810a71fd>] worker_thread+0x6d/0x520
  [<ffffffff810ad3dc>] kthread+0x12c/0x160
  [<ffffffff81969019>] ret_from_fork+0x29/0x40
  [<ffffffffffffffff>] 0xffffffffffffffff

The events leading to the lockup are...

1. A lot of cgwb_release_workfn() is queued at the same time and all
   system_wq kworkers are assigned to execute them.

2. They all end up calling synchronize_rcu_expedited().  One of them
   wins and tries to perform the expedited synchronization.

3. However, that invovles queueing rcu_exp_work to system_wq and
   waiting for it.  Because #1 is holding all available kworkers on
   system_wq, rcu_exp_work can't be executed.  cgwb_release_workfn()
   is waiting for synchronize_rcu_expedited() which in turn is waiting
   for cgwb_release_workfn() to free up some of the kworkers.

We shouldn't be scheduling hundreds of cgwb_release_workfn() at the
same time.  There's nothing to be gained from that.  This patch
updates cgwb release path to use a dedicated percpu workqueue with
@max_active of 1.

While this resolves the problem at hand, it might be a good idea to
isolate rcu_exp_work to its own workqueue too as it can be used from
various paths and is prone to this sort of indirect A-A deadlocks.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: "Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>

For some reason we had discard granularity set to 512 always even when
discards were disabled.  Fix this by having the default be 0, and then
if we turn it on set the discard granularity to the blocksize.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Avoid that complaints similar to the following appear in the kernel log
if the number of zones is sufficiently large:

  fio: page allocation failure: order:9, mode:0x140c0c0(GFP_KERNEL|__GFP_COMP|__GFP_ZERO), nodemask=(null)
  Call Trace:
  dump_stack+0x63/0x88
  warn_alloc+0xf5/0x190
  __alloc_pages_slowpath+0x8f0/0xb0d
  __alloc_pages_nodemask+0x242/0x260
  alloc_pages_current+0x6a/0xb0
  kmalloc_order+0x18/0x50
  kmalloc_order_trace+0x26/0xb0
  __kmalloc+0x20e/0x220
  blkdev_report_zones_ioctl+0xa5/0x1a0
  blkdev_ioctl+0x1ba/0x930
  block_ioctl+0x41/0x50
  do_vfs_ioctl+0xaa/0x610
  SyS_ioctl+0x79/0x90
  do_syscall_64+0x79/0x1b0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 3ed05a98 ("blk-zoned: implement ioctls")
Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com>
Cc: Shaun Tancheff <shaun.tancheff@seagate.com>
Cc: Damien Le Moal <damien.lemoal@hgst.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Hannes Reinecke <hare@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Add WQ_UNBOUND to the knbd-recv workqueue so we're not bound
to a single CPU that is selected at device creation time.
Signed-off-by: Dan Melnic <dmm@fb.com>
Reviewed-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When dispatch_rq_from_ctx is called, in the vast majority of cases
the ctx->rq_list is not empty.
Signed-off-by: huhai <huhai@kylinos.cn>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

If polling completions are racing with the IRQ triggered by a
completion, the IRQ handler will find no work and return IRQ_NONE.
This can trigger complaints about spurious interrupts:

[  560.169153] irq 630: nobody cared (try booting with the "irqpoll" option)
[  560.175988] CPU: 40 PID: 0 Comm: swapper/40 Not tainted 4.17.0-rc2+ #65
[  560.175990] Hardware name: Intel Corporation S2600STB/S2600STB, BIOS SE5C620.86B.00.01.0010.010920180151 01/09/2018
[  560.175991] Call Trace:
[  560.175994]  <IRQ>
[  560.176005]  dump_stack+0x5c/0x7b
[  560.176010]  __report_bad_irq+0x30/0xc0
[  560.176013]  note_interrupt+0x235/0x280
[  560.176020]  handle_irq_event_percpu+0x51/0x70
[  560.176023]  handle_irq_event+0x27/0x50
[  560.176026]  handle_edge_irq+0x6d/0x180
[  560.176031]  handle_irq+0xa5/0x110
[  560.176036]  do_IRQ+0x41/0xc0
[  560.176042]  common_interrupt+0xf/0xf
[  560.176043]  </IRQ>
[  560.176050] RIP: 0010:cpuidle_enter_state+0x9b/0x2b0
[  560.176052] RSP: 0018:ffffa0ed4659fe98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd
[  560.176055] RAX: ffff9527beb20a80 RBX: 000000826caee491 RCX: 000000000000001f
[  560.176056] RDX: 000000826caee491 RSI: 00000000335206ee RDI: 0000000000000000
[  560.176057] RBP: 0000000000000001 R08: 00000000ffffffff R09: 0000000000000008
[  560.176059] R10: ffffa0ed4659fe78 R11: 0000000000000001 R12: ffff9527beb29358
[  560.176060] R13: ffffffffa235d4b8 R14: 0000000000000000 R15: 000000826caed593
[  560.176065]  ? cpuidle_enter_state+0x8b/0x2b0
[  560.176071]  do_idle+0x1f4/0x260
[  560.176075]  cpu_startup_entry+0x6f/0x80
[  560.176080]  start_secondary+0x184/0x1d0
[  560.176085]  secondary_startup_64+0xa5/0xb0
[  560.176088] handlers:
[  560.178387] [<00000000efb612be>] nvme_irq [nvme]
[  560.183019] Disabling IRQ #630

A previous commit removed ->cqe_seen that was handling this case,
but we need to handle this a bit differently due to completions
now running outside the queue lock. Return IRQ_HANDLED from the
IRQ handler, if the completion ring head was moved since we last
saw it.

Fixes: 5cb525c8 ("nvme-pci: handle completions outside of the queue lock")
Reported-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Tested-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull NVMe changes from Keith:

"This is just the first nvme pull request for 4.18. There are several
fabrics and target patches that I missed, so there will be more to
come."

* 'nvme-4.18' of git://git.infradead.org/nvme:
  nvme-pci: drop IRQ disabling on submission queue lock
  nvme-pci: split the nvme queue lock into submission and completion locks
  nvme-pci: handle completions outside of the queue lock
  nvme-pci: move ->cq_vector == -1 check outside of ->q_lock
  nvme-pci: remove cq check after submission
  nvme-pci: simplify nvme_cqe_valid
  nvme: mark the result argument to nvme_complete_async_event volatile
  nvme/pci: Sync controller reset for AER slot_reset
  nvme/pci: Hold controller reference during async probe
  nvme: only reconfigure discard if necessary
  nvme/pci: Use async_schedule for initial reset work
  nvme: lightnvm: add granby support
  NVMe: Add Quirk Delay before CHK RDY for Seagate Nytro Flash Storage
  nvme: change order of qid and cmdid in completion trace
  nvme: fc: provide a descriptive error

Since we aren't sharing the lock for completions now, we don't
have to make it IRQ safe.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>

This is now feasible. We protect the submission queue ring with
->sq_lock, and the completion side with ->cq_lock.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>

Split the completion of events into a two part process:

1) Reap the events inside the queue lock
2) Complete the events outside the queue lock

Since we never wrap the queue, we can access it locklessly after we've
updated the completion queue head. This patch started off with batching
events on the stack, but with this trick we don't have to. Keith Busch
<keith.busch@intel.com> came up with that idea.

Note that this kills the ->cqe_seen as well. I haven't been able to
trigger any ill effects of this. If we do race with polling every so
often, it should be rare enough NOT to trigger any issues.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <keith.busch@intel.com>
[hch: refactored, restored poll early exit optimization]
Signed-off-by: Christoph Hellwig <hch@lst.de>

We only clear it dynamically in nvme_suspend_queue(). When we do, ensure
to do a full flush so that any nvme_queue_rq() invocation will see it.

Ideally we'd kill this check completely, but we're using it to flush
requests on a dying queue.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We always check the completion queue after submitting, but in my testing
this isn't a win even on DRAM/xpoint devices. In some cases it's
actually worse. Kill it.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>

We always look at the current CQ head and phase, so don't pass these
as separate arguments, and rename the function to nvme_cqe_pending.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We'll need that in the PCIe driver soon as we'll read it straight off the
CQ.
Signed-off-by: Christoph Hellwig <hch@lst.de>

When the number of hardware queues is changed, the drivers will call
blk_mq_update_nr_hw_queues() to remap hardware queues. This changes
the ctx mappings, but the current code doesn't clear the
->dispatch_from hint. This can result in dispatch_from pointing to
a ctx that isn't mapped to the hctx anymore.

Fixes: b347689f ("blk-mq-sched: improve dispatching from sw queue")
Signed-off-by: huhai <huhai@kylinos.cn>
Reviewed-by: Ming Lei <ming.lei@redhat.com>

Moved the placement of the clearing to where we clear other items
pertaining to the existing mapping, added Fixes line, and reworded
the commit message.
Signed-off-by: Jens Axboe <axboe@kernel.dk>

We need to make sure we don't just set the size of the bdev to 0 while
it's being used by a file system.  We have the appropriate check in
nbd_bdev_reset, simply use that helper instead.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

bd_invalidated is kind of a pain wrt partitions as it really only
triggers the partition rescan if it is set after bd_ops->open() runs, so
setting it when we reset the device isn't useful.  We also sporadically
would still have partitions left over in some disconnect cases, so fix
this by always setting bd_invalidated on open if there's no
configuration or if we've had a disconnect action happen, that way the
partition table gets invalidated and rescanned properly.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This is what the ioctl based nbd disconnect does as well.  Without this
the device will just sit there and wait for the connection to go away
(or IO to occur) before the device gets torn down.  Instead clear
everything up on our end so the configuration goes away as quickly as
possible.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

When we stopped relying on the bdev everywhere I broke updating the
block device size on the fly, which ceph relies on.  We can't just do
set_capacity, we also have to do bd_set_size so things like parted will
notice the device size change.

Fixes: 29eaadc0 ("nbd: stop using the bdev everywhere")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

I messed up changing the size of an NBD device while it was connected by
not actually updating the device or doing the uevent.  Fix this by
updating everything if we're connected and we change the size.

cc: stable@vger.kernel.org
Fixes: 639812a1 ("nbd: don't set the device size until we're connected")
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

This fixes a use after free bug, we shouldn't be doing disk->queue right
after we do del_gendisk(disk).  Save the queue and do the cleanup after
the del_gendisk.

Fixes: c6a4759e ("nbd: add device refcounting")
cc: stable@vger.kernel.org
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>