- 06 Dec, 2023 11 commits
-
-
Yonglong Liu authored
If a xge port just connect with an optical module and no fiber, it may have a fake link up because there may be interference on the hardware. This patch adds an anti-shake to avoid the problem. And the time of anti-shake is base on tests. Fixes: b917078c ("net: hns: Add ACPI support to check SFP present") Signed-off-by:
Yonglong Liu <liuyonglong@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Reviewed-by:
Wojciech Drewek <wojciech.drewek@intel.com> Signed-off-by:
Paolo Abeni <pabeni@redhat.com>
-
Yonglong Liu authored
Upon changing the tx feature, the hns driver will modify the maybe_stop_tx() and fill_desc() functions, if the modify happens during packet sending, will cause the hardware and software pointers do not match, and the port can not work anymore. This patch deletes the maybe_stop_tx() and fill_desc() functions modification when setting tx feature, and use the skb_is_gro() to determine which functions to use in the tx path. Fixes: 38f616da ("net:hns: Add support of ethtool TSO set option for Hip06 in HNS") Signed-off-by:
-
Daniil Maximov authored
If is_ptp_ring == true in the loop of __aq_ring_xdp_clean function, then a timestamp is stored from a packet in a field of skb object, which is not allocated at the moment of the call (skb == NULL). Generalize aq_ptp_extract_ts and other affected functions so they don't work with struct sk_buff*, but with struct skb_shared_hwtstamps*. Found by Linux Verification Center (linuxtesting.org) with SVACE Fixes: 26efaef7 ("net: atlantic: Implement xdp data plane") Signed-off-by:
Daniil Maximov <daniil31415it@gmail.com> Reviewed-by:
Igor Russkikh <irusskikh@marvell.com> Link: https://lore.kernel.org/r/20231204085810.1681386-1-daniil31415it@gmail.comSigned-off-by:
-
Kelly Kane authored
The ASUS USB-C2500 is an RTL8156 based 2.5G Ethernet controller. Add the vendor and product ID values to the driver. This makes Ethernet work with the adapter. Signed-off-by:
Kelly Kane <kelly@hawknetworks.com> Link: https://lore.kernel.org/r/20231203011712.6314-1-kelly@hawknetworks.comSigned-off-by:
-
Shigeru Yoshida authored
In ipgre_xmit(), skb_pull() may fail even if pskb_inet_may_pull() returns true. For example, applications can use PF_PACKET to create a malformed packet with no IP header. This type of packet causes a problem such as uninit-value access. This patch ensures that skb_pull() can pull the required size by checking the skb with pskb_network_may_pull() before skb_pull(). Fixes: c5441932 ("GRE: Refactor GRE tunneling code.") Signed-off-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
Suman Ghosh <sumang@marvell.com> Link: https://lore.kernel.org/r/20231202161441.221135-1-syoshida@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Shannon Nelson says: ==================== ionic: small driver fixes This is a pair of fixes to address a DIM issue and a kernel test robot complaint v1: https://lore.kernel.org/netdev/20231201000519.13363-1-shannon.nelson@amd.com/ ==================== Link: https://lore.kernel.org/r/20231204192234.21017-1-shannon.nelson@amd.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Brett Creeley authored
Currently ionic_dim_work() is incorrect when in split interrupt mode. This is because the interrupt rate is only being changed for the Rx side even for dim running on Tx. Fix this by using the qcq from the container_of macro. Also, introduce some local variables for a bit of cleanup. Fixes: a6ff85e0 ("ionic: remove intr coalesce update from napi") Signed-off-by:
Brett Creeley <brett.creeley@amd.com> Signed-off-by:
Shannon Nelson <shannon.nelson@amd.com> Reviewed-by:
Florian Fainelli <florian.fainelli@broadcom.com> Link: https://lore.kernel.org/r/20231204192234.21017-3-shannon.nelson@amd.comSigned-off-by:
-
Shannon Nelson authored
Our friendly kernel test robot has reminded us that with a new check we have a warning about a potential string truncation. In this case it really doesn't hurt anything, but it is worth addressing especially since there really is no reason to reserve so many bytes for our queue names. It seems that cutting the queue name buffer length in half stops the complaint. Fixes: c06107ca ("ionic: more ionic name tweaks") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202311300201.lO8v7mKU-lkp@intel.com/Signed-off-by:
-
Paolo Abeni authored
After the blamed commit below, if the user-space application performs window clamping when tp->rcv_wnd is 0, the TCP socket will never be able to announce a non 0 receive window, even after completely emptying the receive buffer and re-setting the window clamp to higher values. Refactor tcp_set_window_clamp() to address the issue: when the user decreases the current clamp value, set rcv_ssthresh according to the same logic used at buffer initialization, but ensuring reserved mem provisioning. To avoid code duplication factor-out the relevant bits from tcp_adjust_rcv_ssthresh() in a new helper and reuse it in the above scenario. When increasing the clamp value, give the rcv_ssthresh a chance to grow according to previously implemented heuristic. Fixes: 3aa7857f ("tcp: enable mid stream window clamp") Reported-by:
David Gibson <david@gibson.dropbear.id.au> Reported-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Dinghao Liu authored
When flow_indr_dev_register() fails, bnxt_init_tc will free bp->tc_info through kfree(). However, the caller function bnxt_init_one() will ignore this failure and call bnxt_shutdown_tc() on failure of bnxt_dl_register(), where a use-after-free happens. Fix this issue by setting bp->tc_info to NULL after kfree(). Fixes: 627c89d0 ("bnxt_en: flow_offload: offload tunnel decap rules via indirect callbacks") Signed-off-by:
Dinghao Liu <dinghao.liu@zju.edu.cn> Reviewed-by:
Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Reviewed-by:
Somnath Kotur <somnath.kotur@broadcom.com> Link: https://lore.kernel.org/r/20231204024004.8245-1-dinghao.liu@zju.edu.cnSigned-off-by:
-
Lorenzo Bianconi authored
Based on the previous allocated packet, page_offset can be not null in veth_convert_skb_to_xdp_buff routine. Take into account page fragment offset during the skb paged area copy in veth_convert_skb_to_xdp_buff(). Fixes: 2d0de67d ("net: veth: use newly added page pool API for veth with xdp") Signed-off-by:
Lorenzo Bianconi <lorenzo@kernel.org> Reviewed-by:
Yunsheng Lin <linyunsheng@huawei.com> Link: https://lore.kernel.org/r/eddfe549e7e626870071930964ac3c38a1dc8068.1701702000.git.lorenzo@kernel.orgSigned-off-by:
-
- 05 Dec, 2023 4 commits
-
-
Zhipeng Lu authored
The rvu_dl will be freed in rvu_npa_health_reporters_destroy(rvu_dl) after the create_workqueue fails, and after that free, the rvu_dl will be translate back through rvu_npa_health_reporters_create, rvu_health_reporters_create, and rvu_register_dl. Finally it goes to the err_dl_health label, being freed again in rvu_health_reporters_destroy(rvu) by rvu_npa_health_reporters_destroy. In the second calls of rvu_npa_health_reporters_destroy, however, it uses rvu_dl->rvu_npa_health_reporter, which is already freed at the end of rvu_npa_health_reporters_destroy in the first call. So this patch prevents the first destroy by instantly returning -ENONMEN when create_workqueue fails. In addition, since the failure of create_workqueue is the only entrence of label err, it has been integrated into the error-handling path of create_workqueue. Fixes: f1168d1e ("octeontx2-af: Add devlink health reporters for NPA") Signed-off-by:
Zhipeng Lu <alexious@zju.edu.cn> Acked-by:
Geethasowjanya Akula <gakula@marvell.com> Link: https://lore.kernel.org/r/20231202095902.3264863-1-alexious@zju.edu.cnSigned-off-by:
-
Jianheng Zhang authored
The status bits of register MAC_FPE_CTRL_STS are clear on read. Using 32-bit read for MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket() clear the status bits. Then the stmmac interrupt handler missing FPE event status and leads to FPE handshaking failure and retries. To avoid clear status bits of MAC_FPE_CTRL_STS in dwmac5_fpe_configure() and dwmac5_fpe_send_mpacket(), add fpe_csr to stmmac_fpe_cfg structure to cache the control bits of MAC_FPE_CTRL_STS and to avoid reading MAC_FPE_CTRL_STS in those methods. Fixes: 5a558611 ("net: stmmac: support FPE link partner hand-shaking procedure") Reviewed-by:
Serge Semin <fancer.lancer@gmail.com> Signed-off-by:
Jianheng Zhang <Jianheng.Zhang@synopsys.com> Link: https://lore.kernel.org/r/CY5PR12MB637225A7CF529D5BE0FBE59CBF81A@CY5PR12MB6372.namprd12.prod.outlook.comSigned-off-by:
-
Naveen Mamindlapalli authored
The current adaptive interrupt coalescing code updates only rx packet stats for dim algorithm. This patch also updates tx packet stats which will be useful when there is only tx traffic. Also moved configuring hardware adaptive interrupt setting to driver dim callback. Fixes: 6e144b47 ("octeontx2-pf: Add support for adaptive interrupt coalescing") Signed-off-by:
Naveen Mamindlapalli <naveenm@marvell.com> Signed-off-by:
-
Thomas Reichinger authored
Probe of Sohard Arcnet cards fails, if 2 or more cards are installed in a system. See kernel log: [ 2.759203] arcnet: arcnet loaded [ 2.763648] arcnet:com20020: COM20020 chipset support (by David Woodhouse et al.) [ 2.770585] arcnet:com20020_pci: COM20020 PCI support [ 2.772295] com20020 0000:02:00.0: enabling device (0000 -> 0003) [ 2.772354] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.071301] com20020 0000:02:00.0 arc0-0 (uninitialized): PCI COM20020: station FFh found at F080h, IRQ 101. [ 3.071305] com20020 0000:02:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.071534] com20020 0000:07:00.0: enabling device (0000 -> 0003) [ 3.071581] (unnamed net_device) (uninitialized): PLX-PCI Controls ... [ 3.369501] com20020 0000:07:00.0: Led pci:green:tx:0-0 renamed to pci:green:tx:0-0_1 due to name collision [ 3.369535] com20020 0000:07:00.0: Led pci:red:recon:0-0 renamed to pci:red:recon:0-0_1 due to name collision [ 3.370586] com20020 0000:07:00.0 arc0-0 (uninitialized): PCI COM20020: station E1h found at C000h, IRQ 35. [ 3.370589] com20020 0000:07:00.0 arc0-0 (uninitialized): Using CKP 64 - data rate 2.5 Mb/s [ 3.370608] com20020: probe of 0000:07:00.0 failed with error -5 commit 5ef216c1 ("arcnet: com20020-pci: add rotary index support") changes the device name of all COM20020 based PCI cards, even if only some cards support this: snprintf(dev->name, sizeof(dev->name), "arc%d-%d", dev->dev_id, i); The error happens because all Sohard Arcnet cards would be called arc0-0, since the Sohard Arcnet cards don't have a PLX rotary coder. I.e. EAE Arcnet cards have a PLX rotary coder, which sets the first decimal, ensuring unique devices names. This patch adds two new card feature flags to indicate which cards support LEDs and the PLX rotary coder. For EAE based cards the names still depend on the PLX rotary coder (untested, since missing EAE hardware). For Sohard based cards, this patch will result in devices being called arc0, arc1, ... (tested). Signed-off-by:
Thomas Reichinger <thomas.reichinger@sohard.de> Fixes: 5ef216c1 ("arcnet: com20020-pci: add rotary index support") Link: https://lore.kernel.org/r/20231130113503.6812-1-thomas.reichinger@sohard.deSigned-off-by:
-
- 04 Dec, 2023 6 commits
-
-
Daniel Borkmann authored
In some potential instances the reference count on struct packet_sock could be saturated and cause overflows which gets the kernel a bit confused. To prevent this, move to a 64-bit atomic reference count on 64-bit architectures to prevent the possibility of this type to overflow. Because we can not handle saturation, using refcount_t is not possible in this place. Maybe someday in the future if it changes it could be used. Also, instead of using plain atomic64_t, use atomic_long_t instead. 32-bit machines tend to be memory-limited (i.e. anything that increases a reference uses so much memory that you can't actually get to 2**32 references). 32-bit architectures also tend to have serious problems with 64-bit atomics. Hence, atomic_long_t is the more natural solution. Reported-by:
"The UK's National Cyber Security Centre (NCSC)" <security@ncsc.gov.uk> Co-developed-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: stable@kernel.org Reviewed-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_aldps_en(). Fixes: 4214cc55 ("r8152: check if disabling ALDPS is finished") Reviewed-by:
Grant Grundler <grundler@chromium.org> Signed-off-by:
Douglas Anderson <dianders@chromium.org> Acked-by:
Hayes Wang <hayeswang@realtek.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8153_pre_firmware_1(). Fixes: 9370f2d0 ("r8152: support request_firmware for RTL8153") Reviewed-by:
-
Douglas Anderson authored
Delay loops in r8152 should break out if RTL8152_INACCESSIBLE is set so that they don't delay too long if the device becomes inaccessible. Add the break to the loop in r8156b_wait_loading_flash(). Fixes: 195aae32 ("r8152: support new chips") Reviewed-by:
-
Douglas Anderson authored
Previous commits added checks for RTL8152_INACCESSIBLE in the loops in the driver. There are still a few more that keep tripping the driver up in error cases and make things take longer than they should. Add those in. All the loops that are part of this commit existed in some form or another since the r8152 driver was first introduced, though RTL8152_INACCESSIBLE was known as RTL8152_UNPLUG before commit 715f67f3 ("r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE") Fixes: ac718b69 ("net/usb: new driver for RTL8152") Reviewed-by:
-
Douglas Anderson authored
As of commit d9962b0d ("r8152: Block future register access if register access fails") there is a race condition that can happen between the USB device reset thread and napi_enable() (not) getting called during rtl8152_open(). Specifically: * While rtl8152_open() is running we get a register access error that's _not_ -ENODEV and queue up a USB reset. * rtl8152_open() exits before calling napi_enable() due to any reason (including usb_submit_urb() returning an error). In that case: * Since the USB reset is perform in a separate thread asynchronously, it can run at anytime USB device lock is not held - even before rtl8152_open() has exited with an error and caused __dev_open() to clear the __LINK_STATE_START bit. * The rtl8152_pre_reset() will notice that the netif_running() returns true (since __LINK_STATE_START wasn't cleared) so it won't exit early. * rtl8152_pre_reset() will then hang in napi_disable() because napi_enable() was never called. We can fix the race by making sure that the r8152 reset routines don't run at the same time as we're opening the device. Specifically we need the reset routines in their entirety rely on the return value of netif_running(). The only way to reliably depend on that is for them to hold the rntl_lock() mutex for the duration of reset. Grabbing the rntl_lock() mutex for the duration of reset seems like a long time, but reset is not expected to be common and the rtnl_lock() mutex is already held for long durations since the core grabs it around the open/close calls. Fixes: d9962b0d ("r8152: Block future register access if register access fails") Reviewed-by:
-
- 02 Dec, 2023 3 commits
-
-
ChunHao Lin authored
When FIFO reaches near full state, device will issue pause frame. If pause slot is enabled(set to 1), in this time, device will issue pause frame only once. But if pause slot is disabled(set to 0), device will keep sending pause frames until FIFO reaches near empty state. When pause slot is disabled, if there is no one to handle receive packets, device FIFO will reach near full state and keep sending pause frames. That will impact entire local area network. This issue can be reproduced in Chromebox (not Chromebook) in developer mode running a test image (and v5.10 kernel): 1) ping -f $CHROMEBOX (from workstation on same local network) 2) run "powerd_dbus_suspend" from command line on the $CHROMEBOX 3) ping $ROUTER (wait until ping fails from workstation) Takes about ~20-30 seconds after step 2 for the local network to stop working. Fix this issue by enabling pause slot to only send pause frame once when FIFO reaches near full state. Fixes: f1bce4ad ("r8169: add support for RTL8125") Reported-by:
ChunHao Lin <hau@realtek.com> Reviewed-by:
Jacob Keller <jacob.e.keller@intel.com> Reviewed-by:
Heiner Kallweit <hkallweit1@gmail.com> Link: https://lore.kernel.org/r/20231129155350.5843-1-hau@realtek.comSigned-off-by:
-
Randy Dunlap authored
rndis_filter uses utf8s_to_utf16s() which is provided by setting NLS, so select NLS to fix the build error: ERROR: modpost: "utf8s_to_utf16s" [drivers/net/hyperv/hv_netvsc.ko] undefined! Fixes: 1ce09e89 ("hyperv: Add support for setting MAC from within guests") Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Wei Liu <wei.liu@kernel.org> Cc: Dexuan Cui <decui@microsoft.com> Reviewed-by:
Simon Horman <horms@kernel.org> Tested-by: Simon Horman <horms@kernel.org> # build-tested Reviewed-by:
Michael Kelley <mikelley@microsoft.com> Link: https://lore.kernel.org/r/20231130055853.19069-1-rdunlap@infradead.orgSigned-off-by:
-
Thinh Tran authored
When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by:Thinh Tran <thinhtr@linux.vnet.ibm.com> Tested-by:
Venkata Sai Duggi <venkata.sai.duggi@ibm.com> Reviewed-by:
David Christensen <drc@linux.vnet.ibm.com> Reviewed-by:
-
- 01 Dec, 2023 4 commits
-
-
Subbaraya Sundeep authored
If a NIXLF is not attached to a PF/VF device then nix_get_nixlf function fails and returns proper error code. But npc_get_default_entry_action does not check it and uses garbage value in subsequent calls. Fix this by cheking the return value of nix_get_nixlf. Fixes: 967db352 ("octeontx2-af: add support for multicast/promisc packet replication feature") Signed-off-by:
Subbaraya Sundeep <sbhatta@marvell.com> Signed-off-by:
-
Subbaraya Sundeep authored
All the mailbox messages sent to AF needs to be guarded by mutex lock. Add the missing lock in otx2_get_pauseparam function. Fixes: 75f36270 ("octeontx2-pf: Support to enable/disable pause frames via ethtool") Signed-off-by:
-
Jakub Kicinski authored
We don't have much to say about 9p, even tho it lives under net/. Avoid CCing netdev. Signed-off-by:
-
Eric Dumazet authored
If fib6_find_prefix() returns NULL, we should silently fallback using fib6_null_entry regardless of RT6_DEBUG value. syzbot reported: WARNING: CPU: 0 PID: 5477 at net/ipv6/ip6_fib.c:1516 fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516 Modules linked in: CPU: 0 PID: 5477 Comm: syz-executor.0 Not tainted 6.7.0-rc2-syzkaller-00029-g9b6de136 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/10/2023 RIP: 0010:fib6_add+0x310d/0x3fa0 net/ipv6/ip6_fib.c:1516 Code: 00 48 8b 54 24 68 e8 42 22 00 00 48 85 c0 74 14 49 89 c6 e8 d5 d3 c2 f7 eb 5d e8 ce d3 c2 f7 e9 ca 00 00 00 e8 c4 d3 c2 f7 90 <0f> 0b 90 48 b8 00 00 00 00 00 fc ff df 48 8b 4c 24 38 80 3c 01 00 RSP: 0018:ffffc90005067740 EFLAGS: 00010293 RAX: ffffffff89cba5bc RBX: ffffc90005067ab0 RCX: ffff88801a2e9dc0 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000 RBP: ffffc90005067980 R08: ffffffff89cbca85 R09: 1ffff110040d4b85 R10: dffffc0000000000 R11: ffffed10040d4b86 R12: 00000000ffffffff R13: 1ffff110051c3904 R14: ffff8880206a5c00 R15: ffff888028e1c820 FS: 00007f763783c6c0(0000) GS:ffff8880b9800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f763783bff8 CR3: 000000007f74d000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> __ip6_ins_rt net/ipv6/route.c:1303 [inline] ip6_route_add+0x88/0x120 net/ipv6/route.c:3847 ipv6_route_ioctl+0x525/0x7b0 net/ipv6/route.c:4467 inet6_ioctl+0x21a/0x270 net/ipv6/af_inet6.c:575 sock_do_ioctl+0x152/0x460 net/socket.c:1220 sock_ioctl+0x615/0x8c0 net/socket.c:1339 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:871 [inline] __se_sys_ioctl+0xf8/0x170 fs/ioctl.c:857 do_syscall_x64 arch/x86/entry/common.c:51 [inline] do_syscall_64+0x45/0x110 arch/x86/entry/common.c:82 Fixes: 7bbfe00e ("ipv6: fix general protection fault in fib6_add()") Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20231129160630.3509216-1-edumazet@google.comSigned-off-by:
-
- 30 Nov, 2023 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Paolo Abeni: "Including fixes from bpf and wifi. Current release - regressions: - neighbour: fix __randomize_layout crash in struct neighbour - r8169: fix deadlock on RTL8125 in jumbo mtu mode Previous releases - regressions: - wifi: - mac80211: fix warning at station removal time - cfg80211: fix CQM for non-range use - tools: ynl-gen: fix unexpected response handling - octeontx2-af: fix possible buffer overflow - dpaa2: recycle the RX buffer only after all processing done - rswitch: fix missing dev_kfree_skb_any() in error path Previous releases - always broken: - ipv4: fix uaf issue when receiving igmp query packet - wifi: mac80211: fix debugfs deadlock at device removal time - bpf: - sockmap: af_unix stream sockets need to hold ref for pair sock - netdevsim: don't accept device bound programs - selftests: fix a char signedness issue - dsa: mv88e6xxx: fix marvell 6350 probe crash - octeontx2-pf: restore TC ingress police rules when interface is up - wangxun: fix memory leak on msix entry - ravb: keep reverse order of operations in ravb_remove()" * tag 'net-6.7-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (51 commits) net: ravb: Keep reverse order of operations in ravb_remove() net: ravb: Stop DMA in case of failures on ravb_open() net: ravb: Start TX queues after HW initialization succeeded net: ravb: Make write access to CXR35 first before accessing other EMAC registers net: ravb: Use pm_runtime_resume_and_get() net: ravb: Check return value of reset_control_deassert() net: libwx: fix memory leak on msix entry ice: Fix VF Reset paths when interface in a failed over aggregate bpf, sockmap: Add af_unix test with both sockets in map bpf, sockmap: af_unix stream sockets need to hold ref for pair sock tools: ynl-gen: always construct struct ynl_req_state ethtool: don't propagate EOPNOTSUPP from dumps ravb: Fix races between ravb_tx_timeout_work() and net related ops r8169: prevent potential deadlock in rtl8169_close r8169: fix deadlock on RTL8125 in jumbo mtu mode neighbour: Fix __randomize_layout crash in struct neighbour octeontx2-pf: Restore TC ingress police rules when interface is up octeontx2-pf: Fix adding mbox work queue entry when num_vfs > 64 net: stmmac: xgmac: Disable FPE MMC interrupts octeontx2-af: Fix possible buffer overflow ... -
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pmLinus Torvalds authored
Pull pmdomain fix from Ulf Hansson: - Avoid polling for the scmi_perf_domain on arm * tag 'pmdomain-v6.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: arm: Avoid polling for scmi_perf_domain
-
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmcLinus Torvalds authored
Pull MMC fixes from Ulf Hansson: "MMC core: - Fix CQE error recovery path MMC host: - cqhci: Fix CQE error recovery path - sdhci-pci-gli: Fix initialization of LPM - sdhci-sprd: Fix enabling/disabling of the vqmmc regulator" * tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled mmc: sdhci-pci-gli: Disable LPM during initialization mmc: cqhci: Fix task clearing in CQE error recovery mmc: cqhci: Warn of halt or task clear failure mmc: block: Retry commands in CQE error recovery mmc: block: Be sure to wait while busy in CQE error recovery mmc: cqhci: Increase recovery halt timeout mmc: block: Do not lose cache flush during CQE error recovery
-
git://git.kernel.org/pub/scm/linux/kernel/git/lee/ledsLinus Torvalds authored
Pull LED fix from Lee Jones: - Remove duplicate sysfs entry 'color' from LEDs class * tag 'leds-fixes-6.7' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: leds: class: Don't expose color sysfs entry
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fix from Ard Biesheuvel: - Fix for EFI unaccepted memory handling * tag 'efi-urgent-for-v6.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/unaccepted: Fix off-by-one when checking for overlapping ranges
-
Paolo Abeni authored
Claudiu Beznea says: ==================== net: ravb: Fixes for the ravb driver This series adds some fixes for ravb driver. Patches in this series were initilly part of series at [1]. Changes in v2: - in description of patch 1/6 documented the addition of out_free_netdev goto label - collected tags - s/out_runtime_disable/out_rpm_disable in patch 2/6 - fixed typos in description of patch 6/6 Changes since [1]: - addressed review comments - added patch 6/6 [1] https://lore.kernel.org/all/20231120084606.4083194-1-claudiu.beznea.uj@bp.renesas.com/ ==================== Link: https://lore.kernel.org/r/20231128080439.852467-1-claudiu.beznea.uj@bp.renesas.comSigned-off-by:
-
Claudiu Beznea authored
On RZ/G3S SMARC Carrier II board having RGMII connections b/w Ethernet MACs and PHYs it has been discovered that doing unbind/bind for ravb driver in a loop leads to wrong speed and duplex for Ethernet links and broken connectivity (the connectivity cannot be restored even with bringing interface down/up). Before doing unbind/bind the Ethernet interfaces were configured though systemd. The sh instructions used to do unbind/bind were: $ cd /sys/bus/platform/drivers/ravb/ $ while :; do echo 11c30000.ethernet > unbind ; \ echo 11c30000.ethernet > bind; done It has been discovered that there is a race b/w IOCTLs initialized by systemd at the response of success binding and the "ravb_write(ndev, CCC_OPC_RESET, CCC)" call in ravb_remove() as follows: 1/ as a result of bind success the user space open/configures the interfaces tough an IOCTL; the following stack trace has been identified on RZ/G3S: Call trace: dump_backtrace+0x9c/0x100 show_stack+0x20/0x38 dump_stack_lvl+0x48/0x60 dump_stack+0x18/0x28 ravb_open+0x70/0xa58 __dev_open+0xf4/0x1e8 __dev_change_flags+0x198/0x218 dev_change_flags+0x2c/0x80 devinet_ioctl+0x640/0x708 inet_ioctl+0x1e4/0x200 sock_do_ioctl+0x50/0x108 sock_ioctl+0x240/0x358 __arm64_sys_ioctl+0xb0/0x100 invoke_syscall+0x50/0x128 el0_svc_common.constprop.0+0xc8/0xf0 do_el0_svc+0x24/0x38 el0_svc+0x34/0xb8 el0t_64_sync_handler+0xc0/0xc8 el0t_64_sync+0x190/0x198 2/ this call may execute concurrently with ravb_remove() as the unbind/bind operation was executed in a loop 3/ if the operation mode is changed to RESET (through ravb_write(ndev, CCC_OPC_RESET, CCC) call in ravb_remove()) while the above ravb_open() is in progress it may lead to MAC (or PHY, or MAC-PHY connection, the right point hasn't been identified at the moment) to be broken, thus the Ethernet connectivity fails to restore. The simple fix for this is to move ravb_write(ndev, CCC_OPC_RESET, CCC)) after unregister_netdev() to avoid resetting the controller while the netdev interface is still registered. To avoid future issues in ravb_remove(), the patch follows the proper order of operations in ravb_remove(): reverse order compared with ravb_probe(). This avoids described races as the IOCTLs as well as unregister_netdev() (called now at the beginning of ravb_remove()) calls rtnl_lock() before continuing and IOCTLs check (though devinet_ioctl()) if device is still registered just after taking the lock: int devinet_ioctl(struct net *net, unsigned int cmd, struct ifreq *ifr) { // ... rtnl_lock(); ret = -ENODEV; dev = __dev_get_by_name(net, ifr->ifr_name); if (!dev) goto done; // ... done: rtnl_unlock(); out: return ret; } Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:Sergey Shtylyov <s.shtylyov@omp.ru> Signed-off-by:
Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com> Signed-off-by:
-
Claudiu Beznea authored
In case ravb_phy_start() returns with error the settings applied in ravb_dmac_init() are not reverted (e.g. config mode). For this call ravb_stop_dma() on failure path of ravb_open(). Fixes: a0d2f206 ("Renesas Ethernet AVB PTP clock driver") Reviewed-by:
-
Claudiu Beznea authored
ravb_phy_start() may fail. If that happens, the TX queues will remain started. Thus, move the netif_tx_start_all_queues() after PHY is successfully initialized. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:
Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by:
-
Claudiu Beznea authored
Hardware manual of RZ/G3S (and RZ/G2L) specifies the following on the description of CXR35 register (chapter "PHY interface select register (CXR35)"): "After release reset, make write-access to this register before making write-access to other registers (except MDIOMOD). Even if not need to change the value of this register, make write-access to this register at least one time. Because RGMII/MII MODE is recognized by accessing this register". The setup procedure for EMAC module (chapter "Setup procedure" of RZ/G3S, RZ/G2L manuals) specifies the E-MAC.CXR35 register is the first EMAC register that is to be configured. Note [A] from chapter "PHY interface select register (CXR35)" specifies the following: [A] The case which CXR35 SEL_XMII is used for the selection of RGMII/MII in APB Clock 100 MHz. (1) To use RGMII interface, Set ‘H’03E8_0000’ to this register. (2) To use MII interface, Set ‘H’03E8_0002’ to this register. Take into account these indication. Fixes: 1089877a ("ravb: Add RZ/G2L MII interface support") Reviewed-by:
-
Claudiu Beznea authored
pm_runtime_get_sync() may return an error. In case it returns with an error dev->power.usage_count needs to be decremented. pm_runtime_resume_and_get() takes care of this. Thus use it. Fixes: c156633f ("Renesas Ethernet AVB driver proper") Reviewed-by:
-
Claudiu Beznea authored
reset_control_deassert() could return an error. Some devices cannot work if reset signal de-assert operation fails. To avoid this check the return code of reset_control_deassert() in ravb_probe() and take proper action. Along with it, the free_netdev() call from the error path was moved after reset_control_assert() on its own label (out_free_netdev) to free netdev in case reset_control_deassert() fails. Fixes: 0d13a1a4 ("ravb: Add reset support") Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by:
-
