Skip to content

L
linux
Switch branch/tag
  1. 04 Sep, 2022 3 commits
  3. 02 Sep, 2022 6 commits
  5. 01 Sep, 2022 4 commits
  7. 30 Aug, 2022 4 commits
  9. 29 Aug, 2022 7 commits
  11. 26 Aug, 2022 6 commits
  13. 25 Aug, 2022 6 commits
    • Rob Clark's avatar
      drm/virtio: Fix same-context optimization · 3007dc2a
      Rob Clark authored 
      When VIRTGPU_EXECBUF_RING_IDX is used, we should be considering the
timeline that the EB if running on rather than the global driver fence
context.

Fixes: 85c83ea9 ("drm/virtio: implement context init: allocate an array of fence contexts")
Signed-off-by: default avatarRob Clark <robdclark@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20220812224001.2806463-1-robdclark@gmail.comSigned-off-by: default avatarGerd Hoffmann <kraxel@redhat.com>
      3007dc2a
    • Vivek Kasireddy's avatar
      udmabuf: Set ubuf->sg = NULL if the creation of sg table fails · d9c04a1b
      Vivek Kasireddy authored 
      When userspace tries to map the dmabuf and if for some reason
(e.g. OOM) the creation of the sg table fails, ubuf->sg needs to be
set to NULL. Otherwise, when the userspace subsequently closes the
dmabuf fd, we'd try to erroneously free the invalid sg table from
release_udmabuf resulting in the following crash reported by syzbot:

general protection fault, probably for non-canonical address
0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 0 PID: 3609 Comm: syz-executor487 Not tainted
5.19.0-syzkaller-13930-g7ebfc85e #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 07/22/2022
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114
Code: 48 89 fa 48 c1 ea 03 80 3c 02 00 0f 85 2b 04 00 00 48 8d 7d 0c 4c
8b 63 30 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14
02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 e2
RSP: 0018:ffffc900037efd30 EFLAGS: 00010246
RAX: dffffc0000000000 RBX: ffffffff8cb67800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffffff84ad27e0 RDI: 0000000000000000
RBP: fffffffffffffff4 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000000 R11: 000000000008c07c R12: ffff88801fa05000
R13: ffff888073db07e8 R14: ffff888025c25440 R15: 0000000000000000
FS:  0000555555fc4300(0000) GS:ffff8880b9a00000(0000)
knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fc1c0ce06e4 CR3: 00000000715e6000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
 <TASK>
 dma_buf_release+0x157/0x2d0 drivers/dma-buf/dma-buf.c:78
 __dentry_kill+0x42b/0x640 fs/dcache.c:612
 dentry_kill fs/dcache.c:733 [inline]
 dput+0x806/0xdb0 fs/dcache.c:913
 __fput+0x39c/0x9d0 fs/file_table.c:333
 task_work_run+0xdd/0x1a0 kernel/task_work.c:177
 ptrace_notify+0x114/0x140 kernel/signal.c:2353
 ptrace_report_syscall include/linux/ptrace.h:420 [inline]
 ptrace_report_syscall_exit include/linux/ptrace.h:482 [inline]
 syscall_exit_work kernel/entry/common.c:249 [inline]
 syscall_exit_to_user_mode_prepare+0x129/0x280 kernel/entry/common.c:276
 __syscall_exit_to_user_mode_work kernel/entry/common.c:281 [inline]
 syscall_exit_to_user_mode+0x9/0x50 kernel/entry/common.c:294
 do_syscall_64+0x42/0xb0 arch/x86/entry/common.c:86
 entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7fc1c0c35b6b
Code: 0f 05 48 3d 00 f0 ff ff 77 45 c3 0f 1f 40 00 48 83 ec 18 89 7c 24
0c e8 63 fc ff ff 8b 7c 24 0c 41 89 c0 b8 03 00 00 00 0f 05 <48> 3d 00
f0 ff ff 77 35 44 89 c7 89 44 24 0c e8 a1 fc ff ff 8b 44
RSP: 002b:00007ffd78a06090 EFLAGS: 00000293 ORIG_RAX: 0000000000000003
RAX: 0000000000000000 RBX: 0000000000000007 RCX: 00007fc1c0c35b6b
RDX: 0000000020000280 RSI: 0000000040086200 RDI: 0000000000000006
RBP: 0000000000000007 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000293 R12: 000000000000000c
R13: 0000000000000003 R14: 00007fc1c0cfe4a0 R15: 00007ffd78a06140
 </TASK>
Modules linked in:
---[ end trace 0000000000000000 ]---
RIP: 0010:dma_unmap_sgtable include/linux/dma-mapping.h:378 [inline]
RIP: 0010:put_sg_table drivers/dma-buf/udmabuf.c:89 [inline]
RIP: 0010:release_udmabuf+0xcb/0x4f0 drivers/dma-buf/udmabuf.c:114

Reported-by: syzbot+c80e9ef5d8bb45894db0@syzkaller.appspotmail.com
Cc: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: default avatarVivek Kasireddy <vivek.kasireddy@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20220825063522.801264-1-vivek.kasireddy@intel.comSigned-off-by: default avatarGerd Hoffmann <kraxel@redhat.com>
      d9c04a1b
    • Danilo Krummrich's avatar
      drm/vc4: hvs: protect drm_print_regset32() · b3be4520
      Danilo Krummrich authored 
      In vc4_hvs_dump_state() potentially freed resources are protected from
being accessed with drm_dev_enter()/drm_dev_exit().

Also include drm_print_regset32() in the protected section, since
drm_print_regset32() does access memory that is typically mapped via
devm_* calls.

Fixes: 969cfae1 ("drm/vc4: hvs: Protect device resources after removal")
Signed-off-by: default avatarDanilo Krummrich <dakr@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-5-dakr@redhat.com
      b3be4520
    • Danilo Krummrich's avatar
      drm/vc4: crtc: protect device resources after removal · e0c95303
      Danilo Krummrich authored 
      (Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.

However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.

Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().

Fixes: 7cc4214c ("drm/vc4: crtc: Switch to drmm_kzalloc")
Signed-off-by: default avatarDanilo Krummrich <dakr@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-4-dakr@redhat.com
      e0c95303
    • Danilo Krummrich's avatar
      drm/vc4: plane: protect device resources after removal · 6acb416b
      Danilo Krummrich authored 
      (Hardware) resources which are bound to the driver and device lifecycle
must not be accessed after the device and driver are unbound.

However, the DRM device isn't freed as long as the last user closed it,
hence userspace can still call into the driver.

Therefore protect the critical sections which are accessing those
resources with drm_dev_enter() and drm_dev_exit().

Fixes: 9872c7a3 ("drm/vc4: plane: Switch to drmm_universal_plane_alloc()")
Signed-off-by: default avatarDanilo Krummrich <dakr@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-3-dakr@redhat.com
      6acb416b
    • Danilo Krummrich's avatar
      drm/vc4: hdmi: unlock mutex when device is unplugged · 227295df
      Danilo Krummrich authored 
      In vc4_hdmi_encoder_{pre,post}_crtc_enable() commit cd00ed51
("drm/vc4: hdmi: Protect device resources after removal") missed to
unlock the mutex before returning due to drm_dev_enter() indicating the
device being unplugged.

Fixes: cd00ed51 ("drm/vc4: hdmi: Protect device resources after removal")
Signed-off-by: default avatarDanilo Krummrich <dakr@redhat.com>
Signed-off-by: default avatarMaxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20220824161327.330627-2-dakr@redhat.com
      227295df
  15. 23 Aug, 2022 4 commits
    • Lyude Paul's avatar
      drm/display/dp_mst: Move all payload info into the atomic state · 4d07b0bc
      Lyude Paul authored 
      Now that we've finally gotten rid of the non-atomic MST users leftover in
the kernel, we can finally get rid of all of the legacy payload code we
have and move as much as possible into the MST atomic state structs. The
main purpose of this is to make the MST code a lot less confusing to work
on, as there's a lot of duplicated logic that doesn't really need to be
here. As well, this should make introducing features like fallback link
retraining and DSC support far easier.

Since the old payload code was pretty gnarly and there's a Lot of changes
here, I expect this might be a bit difficult to review. So to make things
as easy as possible for reviewers, I'll sum up how both the old and new
code worked here (it took me a while to figure this out too!).

The old MST code basically worked by maintaining two different payload
tables - proposed_vcpis, and payloads. proposed_vcpis would hold the
modified payload we wanted to push to the topology, while payloads held the
payload table that was currently programmed in hardware. Modifications to
proposed_vcpis would be handled through drm_dp_allocate_vcpi(),
drm_dp_mst_deallocate_vcpi(), and drm_dp_mst_reset_vcpi_slots(). Then, they
would be pushed via drm_dp_mst_update_payload_step1() and
drm_dp_mst_update_payload_step2().

Furthermore, it's important to note how adding and removing VC payloads
actually worked with drm_dp_mst_update_payload_step1(). When a VC payload
is removed from the VC table, all VC payloads which come after the removed
VC payload's slots must have their time slots shifted towards the start of
the table. The old code handles this by looping through the entire payload
table and recomputing the start slot for every payload in the topology from
scratch. While very much overkill, this ends up doing the right thing
because we always order the VCPIs for payloads from first to last starting
timeslot.

It's important to also note that drm_dp_mst_update_payload_step2() isn't
actually limited to updating a single payload - the driver can use it to
queue up multiple payload changes so that as many of them can be sent as
possible before waiting for the ACT. This is -technically- not against
spec, but as Wayne Lin has pointed out it's not consistently implemented
correctly in hubs - so it might as well be.

drm_dp_mst_update_payload_step2() is pretty self explanatory and basically
the same between the old and new code, save for the fact we don't have a
second step for deleting payloads anymore -and thus rename it to
drm_dp_mst_add_payload_step2().

The new payload code stores all of the current payload info within the MST
atomic state and computes as much of the state as possible ahead of time.
This has the one exception of the starting timeslots for payloads, which
can't be determined at atomic check time since the starting time slots will
vary depending on what order CRTCs are enabled in the atomic state - which
varies from driver to driver. These are still stored in the atomic MST
state, but are only copied from the old MST state during atomic commit
time. Likewise, this is when new start slots are determined.

Adding/removing payloads now works much more closely to how things are
described in the spec. When we delete a payload, we loop through the
current list of payloads and update the start slots for any payloads whose
time slots came after the payload we just deleted. Determining the starting
time slots for new payloads being added is done by simply keeping track of
where the end of the VC table is in
drm_dp_mst_topology_mgr->next_start_slot. Additionally, it's worth noting
that we no longer have a single update_payload() function. Instead, we now
have drm_dp_mst_add_payload_step1|2() and drm_dp_mst_remove_payload(). As
such, it's now left it up to the driver to figure out when to add or remove
payloads. The driver already knows when it's disabling/enabling CRTCs, so
it also already knows when payloads should be added or removed.

Changes since v1:
* Refactor around all of the completely dead code changes that are
  happening in amdgpu for some reason when they really shouldn't even be
  there in the first place… :\
* Remove mention of sending one ACT per series of payload updates. As Wayne
  Lin pointed out, there are apparently hubs on the market that don't work
  correctly with this scheme and require a separate ACT per payload update.
* Fix accidental drop of mst_mgr.lock - Wayne Lin
* Remove mentions of allowing multiple ACT updates per payload change,
  mention that this is a result of vendors not consistently supporting this
  part of the spec and requiring a unique ACT for each payload change.
* Get rid of reference to drm_dp_mst_port in DC - turns out I just got
  myself confused by DC and we don't actually need this.
Changes since v2:
* Get rid of fix for not sending payload deallocations if ddps=0 and just
  go back to wayne's fix
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-18-lyude@redhat.com
      4d07b0bc
    • Lyude Paul's avatar
      drm/radeon: Drop legacy MST support · 01ad1d9c
      Lyude Paul authored 
      Right now, radeon is technically the only non-atomic driver still making
use of the MST helpers - and thus the final user of all of the legacy MST
helpers. Originally I was going to look into seeing if we could move legacy
MST into the radeon driver itself, however:

* SI and CIK both can use amdgpu, which still supports MST
* It currently doesn't work according to my own testing. I'm sure with some
  troubleshooting we could likely fix it, but that brings me to point #2:
* It was never actually enabled by default, and is still marked as
  experimental in the module parameter description
* If people were using it, someone probably would have probably seen a bug
  report about how it is currently not functional by now. That certainly
  doesn't appear to be the case, since before getting access to my own
  hardware I had to go out of my way to try finding someone to help test
  whether this legacy MST code even works - even amongst AMD employees.
* Getting rid of this code and only having atomic versions of the MST
  helpers to maintain is likely going to be a lot easier in the long run,
  and will make it a lot easier for others contributing to this code to
  follow along with what's happening.

FWIW - if anyone still wants this code to be in the tree and has a good
idea of how to support this without needing to maintain the legacy MST
helpers (trying to move them would probably be acceptable), I'm happy to
suggestions. But my hope is that we can just drop this code and forget
about it. I've already run this idea by Harry Wentland and Alex Deucher a
few times as well.
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: default avatarAlex Deucher <alexander.deucher@amd.com>
Acked-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-17-lyude@redhat.com
      01ad1d9c
    • Lyude Paul's avatar
      drm/display/dp_mst: Maintain time slot allocations when deleting payloads · 6366fc70
      Lyude Paul authored 
      Currently, we set drm_dp_atomic_payload->time_slots to 0 in order to
indicate that we're about to delete a payload in the current atomic state.
Since we're going to be dropping all of the legacy code for handling the
payload table however, we need to be able to ensure that we still keep
track of the current time slot allocations for each payload so we can reuse
this info when asking the root MST hub to delete payloads. We'll also be
using it to recalculate the start slots of each VC.

So, let's keep track of the intent of a payload in drm_dp_atomic_payload by
adding ->delete, which we set whenever we're planning on deleting a payload
during the current atomic commit.
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-16-lyude@redhat.com
      6366fc70
    • Lyude Paul's avatar
      drm/display/dp_mst: Drop all ports from topology on CSNs before queueing link address work · 2482fcee
      Lyude Paul authored 
      We want to start cutting down on all of the places that we use port
validation, so that ports may be removed from the topology as quickly as
possible to minimize the number of errors we run into as a result of being
out of sync with the current topology status. This isn't a very typical
scenario and I don't think I've ever even run into it - but since the next
commit is going to make some changes to payload updates depending on their
hotplug status I think it's a probably good idea to take precautions.

Let's do this with CSNs by moving some code around so that we only queue
link address probing work at the end of handling all CSNs - allowing us to
make sure we drop as many topology references as we can beforehand.
Signed-off-by: default avatarLyude Paul <lyude@redhat.com>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Sean Paul <sean@poorly.run>
Acked-by: default avatarJani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220817193847.557945-15-lyude@redhat.com
      2482fcee
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7