- 07 Oct, 2021 1 commit
-
-
Daniel Baluta authored
We need to introduce snd_sof_mailbox_{read/write} in order to provide a generic way for mailbox access. These routines are optional, each platform can implement their own specific routines. So far, all platforms use mmapped I/O thus they can use custom made routines sof_mailbox_read / sof_mailbox_write that use MMIO. Signed-off-by:Daniel Baluta <daniel.baluta@nxp.com> Signed-off-by:
Bud Liviu-Alexandru <budliviu@gmail.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Péter Ujfalusi <peter.ujfalusi@linux.intel.com> Link: https://lore.kernel.org/r/20211004152147.1268978-2-daniel.baluta@oss.nxp.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 05 Oct, 2021 18 commits
-
-
Mark Brown authored
Merge series "ASoC: Intel: machine driver updates for 5.16" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: One quirk for a Dell TigerLake/SoundWire device, and initial support for platforms based on the ES8336 codec (aka ES8316). For full functionality, an update of the codec driver will be needed. Pierre-Louis Bossart (5): ASoC: Intel: soc-acpi: apl/glk/tgl: add entry for devices based on ES8336 codec ALSA: intel-dsp-config: add quirk for APL/GLK/TGL devices based on ES8336 codec ASoC: Intel: add machine driver for SOF+ES8336 ASoC: Intel: soc-acpi: add missing quirk for TGL SDCA single amp ASoC: Intel: sof_sdw: add missing quirk for Dell SKU 0A45 sound/hda/intel-dsp-config.c | 22 +- sound/soc/intel/boards/Kconfig | 14 + sound/soc/intel/boards/Makefile | 2 + sound/soc/intel/boards/sof_es8336.c | 569 ++++++++++++++++++ sound/soc/intel/boards/sof_sdw.c | 10 + .../intel/common/soc-acpi-intel-bxt-match.c | 6 + .../intel/common/soc-acpi-intel-glk-match.c | 7 +- .../intel/common/soc-acpi-intel-tgl-match.c | 47 ++ 8 files changed, 674 insertions(+), 3 deletions(-) create mode 100644 sound/soc/intel/boards/sof_es8336.c -- 2.25.1 -
Mark Brown authored
Merge series "ASoC: SOF: Intel: add flags to turn on SSP clocks early" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: With the chip shortage, some GeminiLake Intel-based designs were respun and now rely on codecs that need the SSP bit clock turned on in the hw_params stage, not the trigger stage. This patchset mirrors the flags added in the SOF DAI_CONFIG IPC, and sets the flags when this capability is indicated as necessary in the topology files where the SSP configuration is stored. We initially considered a more generic solution with an on-demand SSP clock activation using the common clock framework. This would be a more elegant solution indeed, but it would have required more intrusive changes that would conflict with the SOF multi-client support (in-development), and more backport hassles on product branches. The on-demand activation of clocks is still a desired feature that will be enabled at a later point. Bard Liao (1): ASoC: SOF: dai-intel: add SOF_DAI_INTEL_SSP_CLKCTRL_MCLK/BCLK_ES bits Pierre-Louis Bossart (4): ASoC: SOF: dai: mirror group_id definition added in firmware ASoC: SOF: dai: include new flags for DAI_CONFIG ASoC: SOF: Intel: hda: add new flags for DAI_CONFIG ASoC: SOF: Intel: hda-dai: improve SSP DAI handling for dynamic pipelines include/sound/sof/dai-intel.h | 4 ++ include/sound/sof/dai.h | 10 ++++- sound/soc/sof/intel/hda-dai.c | 82 ++++++++++++++++++++++++++++++++++- sound/soc/sof/intel/hda.c | 6 +++ sound/soc/sof/sof-audio.c | 4 ++ 5 files changed, 103 insertions(+), 3 deletions(-) -- 2.25.1 -
Mark Brown authored
Merge series "ASoC: SOF: topology: minor updates" from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>: Two patches to visualize settings and override dynamic pipelines + one correction for errors on connections. Pierre-Louis Bossart (2): ASoC: SOF: topology: show clks_control value in dynamic debug ASoC: SOF: topology: allow for dynamic pipelines override for debug Ranjani Sridharan (1): ASoC: SOF: topology: return error if sof_connect_dai_widget() fails sound/soc/sof/sof-priv.h | 6 ++++++ sound/soc/sof/topology.c | 24 +++++++++++++++--------- 2 files changed, 21 insertions(+), 9 deletions(-) -- 2.25.1
-
Daniel Baluta authored
This allows specifying an alternate path for SOF firmware or SOF topology. This is particularly useful for i.MX when running Linux vs Android. Signed-off-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20211005071949.1277613-1-daniel.baluta@oss.nxp.comSigned-off-by:
-
Rikard Falkeborn authored
The struct cz_aif1_ops is only assigned to the ops field in the snd_soc_dai_link struct which is a pointer to const struct snd_soc_ops. Make it const to allow the compiler to put it in read-only memory. Signed-off-by:
Rikard Falkeborn <rikard.falkeborn@gmail.com> Link: https://lore.kernel.org/r/20211004224514.8783-1-rikard.falkeborn@gmail.comSigned-off-by:
-
Ranjani Sridharan authored
Return the error if sof_connect_dai_widget() fails to abort topology loading and prevent card registration. Reviewed-by:
Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
For debug and community support, it's useful to expose a kernel parameter to prevent the use of dynamic pipelines exposed in a topology file, or conversely to force an existing topology to use dynamic pipelines. Add an override bit and an enable bit which is valid only when the override is set. For products, the intent is that the topology file defines the behavior, these two bits are only intended for diagnosis and performance checks. Signed-off-by:
Bard Liao <bard.liao@intel.com> Reviewed-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
We log most of the SSP configurations except the clks_control. This will be used to enable bclk/mclk early start so it's useful to show the information to the user. Signed-off-by:
-
Pierre-Louis Bossart authored
In order to keep the widget use_count balanced, make sure the DAI widgets are allocated once in hw_params and released in hw_free. A 'setup' status flag is used to deal with cases where the .hw_params callback is invoked multiple times, and likewise with cases where hw_free is invoked without hw_params being called first (which can happen if the FE hw_params fails). In addition, this patch frees the widgets in the suspend transition, and reallocates them in the .prepare callback. The 'setup' flag helps in this case differentiate between resume (setup needed) and xruns (setup not needed). This balanced operation was not needed previously but will be required when SOF dynamic pipelines are enabled. Co-developed-by:
-
Bard Liao authored
Add two clks_control bits. MCLK and/or BCLK will start during hw_params and stop during hw_free if the corresponding bit is set. While the kernel does not do anything with these bitfields, this is also tagged as part of the ABI 3.19 changes. Signed-off-by:
Bard Liao <yung-chuan.liao@linux.intel.com> Signed-off-by:
Brent Lu <brent.lu@intel.com> Link: https://lore.kernel.org/r/20211004171430.103674-5-pierre-louis.bossart@linux.intel.comSigned-off-by:
-
Pierre-Louis Bossart authored
The DAI_CONFIG is used for both hw_params and hw_free. Use flags to specify what stage the configuration applies to. the DAI_CONFIG IPC may be sent also during the widget setup so each flag is cleared after the IPC to restore the state. Signed-off-by:
-
Pierre-Louis Bossart authored
Mirror changes done in SOF tree. The changes do not rely on BIT/GENMASK on purpose to keep the structure and flags common with the firmware tree. The DAI_CONFIG IPC is currently used in multiple ways. It is sent to the DSP firmware when enabling static or dynamic pipelines, in hw_params or prepare callbacks for Intel SSP, HDaudio and ALH, on trigger_stop and hw_free. This IPC has been abused a bit in the past, i.e. the values used for some of the DAI-specific fields are used to either allocate or free resources. Two typical examples are Intel HDaudio and SoundWire/ALH DAIs, where using a zero DMA channel number or stream tag signals to the firmware the DMA channels or tags allocated earlier can be freed. Rather than add a new IPC for 'hw_params' and 'hw_free', this patch suggests supporting a 2-bit value conveying the 'stage' information in an existing IPC structure. Only 3 possible values are used. The mapping between HW_PARAMS and HW_FREE flags and ALSA definitions is not strictly 1:1, e.g. in some cases the HW_PARAM flag might be set during the .prepare callback, while the HW_FREE might be sent during the ALSA .trigger for stop/suspend. The semantics of the flags is to reserve and start/stop all needed resources, typically hardware related such as DMAs or clocks, when the HW_PARAMS is set, while the HW_FREE flag allows the firmware to release the resources allocated. The data transfers are still controlled within the firmware through the propagation of the trigger command. The driver can then pass information that the DAI_CONFIG was invoked in e.g. a pipeline/DAI setup, hw_params or hw_free stage without having to use a special DAI-specific encoding. Unfortunately we can't remove old encodings due to backwards-compatibility requirements but for new cases, such as the SSP in follow-up patches, we can make the IPC less cryptic. This change is tagged as ABI 3.19 and is completely backwards compatible. Signed-off-by:
-
Pierre-Louis Bossart authored
This was added in ABI 3.17 but never added to the kernel tree. The group_id is not currently used but this patch is required before additional changes. Signed-off-by:
-
Pierre-Louis Bossart authored
This device is based on SDCA codecs but with a single amplifier instead of two. BugLink: https://github.com/thesofproject/linux/issues/3161Signed-off-by:
Rander Wang <rander.wang@intel.com> Reviewed-by:
-
Pierre-Louis Bossart authored
We don't have a configuration for a single amp on link1. BugLink: https://github.com/thesofproject/linux/issues/3161Signed-off-by:
-
Pierre-Louis Bossart authored
Add machine driver to support APL/GLK/TGL platforms. The TGL platform supports DMIC, APL and GLK do not. Co-developed-by:
Huajun Li <huajun.li@intel.com> Signed-off-by:
-
Pierre-Louis Bossart authored
These devices are based on an I2C/I2S device, we need to force the use of the SOF driver otherwise the legacy HDaudio driver will be loaded - only HDMI will be supported. Co-developed-by:
-
Pierre-Louis Bossart authored
A number of devices, such as the "Chuwi HI10x" and "UNIQCELL Q15.6", are based on APL/GLK with an I2C/I2S ES8336 codec. Add table to find topology and firmware files. Co-developed-by:
-
- 04 Oct, 2021 7 commits
-
-
Kunihiko Hayashi authored
To eliminate FIXME, add descriptions of what each port number is associated with. Cc: Rob Herring <robh@kernel.org> Signed-off-by:
Kunihiko Hayashi <hayashi.kunihiko@socionext.com> Link: https://lore.kernel.org/r/1633313546-23258-1-git-send-email-hayashi.kunihiko@socionext.comSigned-off-by:
-
Hans de Goede authored
Set the card.components string using the new nau8824_components() helper which returns a components string based on the DMI quirks inside the nau8824 codec driver. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20211002211459.110124-4-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Some devices using the NAU8824 have only one speaker. To still have things working properly this requires the left + right channels to both be mixed to the left speaker output. This mixer setup is done by userspace based on UCM profiles. But this requires userspace to know that there is a mono-speaker. Add a helper function (for the machine driver) to get a components string providing this info. This is done inside the codec driver because the codec driver already has a DMI quirk table. Signed-off-by:
-
Hans de Goede authored
Add a quirk mechanism to allow specifying that active-high jack-detection should be used on platforms where this info is not available in devicetree. And add an entry for the Cyberbook T116 tablet to the DMI table, so that jack-detection will work properly on this tablet. Signed-off-by:
-
Hans de Goede authored
The NAU8824_JACK_LOGIC define was wrong, for active high jack-detect to work bit 1 needs to be set, rather then bit 0. The correct bit was found in the Android kernel source dump for a Cyberbook T116 tablet; and this was also tested on that same tablet. Signed-off-by:
-
Hans de Goede authored
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then disabling it immediately after requesting it. This fixes a possible race where the IRQ might trigger between requesting and disabling it; and this also leads to a small code cleanup. Signed-off-by:
-
Hans de Goede authored
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then disabling it immediately after requesting it. This fixes a possible race where the IRQ might trigger between requesting and disabling it; and this also leads to a small code cleanup. Signed-off-by:
-
- 02 Oct, 2021 1 commit
-
-
Seven Lee authored
The driver is for codec NAU88L21 of Nuvoton Technology Corporation. The NAU88L21 is an ultra-low power high performance audio codec that supports both analog and digital audio functions. Signed-off-by:
Seven Lee <wtli@nuvoton.com> Link: https://lore.kernel.org/r/20211001103108.3297848-1-wtli@nuvoton.comSigned-off-by:
-
- 01 Oct, 2021 13 commits
-
-
Mark Brown authored
Merge series "Add support for on demand pipeline setup/destroy" from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>: Hi, The previous, v2 of this series was sent by Daniel Baluta: https://lore.kernel.org/alsa-devel/20210917143659.401102-1-daniel.baluta@oss.nxp.com/ We have agreed that it might be better that someone from Intel is going to take it from here as we already have the infrastructure up to test and verify the dynamic pipelines support. Changes since v2 (sent by Daniel Baluta): - patch 10: Fix NULL point dereference in hda_dai_update_config() - I have kept Daniel's SoB for the series. Changes since v1: - Signed-off-by tag added by Daniel This series implements initial support for dynamic pipelines to setup/teardown pipeline as needed when a PCM is open/closed. Initially dynamic pipelines are only supported with single core setup which will be expanded with a follow-up series. Review with SOF community at https://github.com/thesofproject/linux/pull/2794 The feature has been merged on 1st of April to sof-dev, all issues found since has been fixed and squashed to this upstream series. Regards, Peter --- Ranjani Sridharan (12): ASoC: topology: change the complete op in snd_soc_tplg_ops to return int ASoC: SOF: control: Add access field in struct snd_sof_control ASoC: SOF: topology: Add new token for dynamic pipeline ASoC: SOF: sof-audio: add helpers for widgets, kcontrols and dai config set up AsoC: dapm: export a couple of functions ASoC: SOF: Add new fields to snd_sof_route ASoC: SOF: restore kcontrols for widget during set up ASoC: SOF: Don't set up widgets during topology parsing ASoC: SOF: Introduce widget use_count ASoC: SOF: Intel: hda: make sure DAI widget is set up before IPC ASoC: SOF: Add support for dynamic pipelines ASoC: SOF: topology: Add kernel parameter for topology verification include/sound/soc-dpcm.h | 1 + include/sound/soc-topology.h | 2 +- include/uapi/sound/sof/tokens.h | 1 + sound/soc/intel/skylake/skl-topology.c | 6 +- sound/soc/soc-dapm.c | 2 + sound/soc/soc-pcm.c | 4 +- sound/soc/soc-topology.c | 10 +- sound/soc/sof/intel/hda-dai.c | 174 +++--- sound/soc/sof/intel/hda.c | 177 ++++-- sound/soc/sof/intel/hda.h | 5 + sound/soc/sof/ipc.c | 22 + sound/soc/sof/pcm.c | 58 +- sound/soc/sof/pm.c | 4 +- sound/soc/sof/sof-audio.c | 709 +++++++++++++++++++------ sound/soc/sof/sof-audio.h | 32 +- sound/soc/sof/sof-priv.h | 1 + sound/soc/sof/topology.c | 362 +++++-------- 17 files changed, 1032 insertions(+), 538 deletions(-) -- 2.33.0
-
Viorel Suman authored
Implement SPDIF bypass mode. It implies internal SoC routing of SPDIF input signal to SPDIF output signal. The test bed requires two boards: B1 configured in bypass mode, and B2 to feed B1 SPDIF RX port and read B1 SPDIF TX port: B2 TX -> B1 RX, B2 RX <- B1 TX. The test procedure: a) Boot both boards b) B2: start "arecord <spdifcard> -r 48kHz | aplay <local DAC>" c) B2: start "aplay <spdifcard> -r 48kHz <2ch 48kHz audio file>" d) B1: enable bypass mode: amixer -cimxspdif cset numid=8,iface=PCM,name='Bypass Mode' on e) B2: check DAC audio, make sure the same sample rate is used at steps b) and c), in example above the rate is 48kHz. f) B1: try to run "aplay" or "arecord" on imxspdif card while in bypass mode - both must fail until bypass mode is disabled g) B1: disable bypass mode: amixer -cimxspdif cset numid=8,iface=PCM,name='Bypass Mode' off h) B1: check the usual playback and capture on imxspdif card. During this test try to set bypass mode - must not be allowed while playback or capture is running. Signed-off-by:
Viorel Suman <viorel.suman@nxp.com> Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1632649760-1651-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Ranjani Sridharan authored
Add a kernel debug flag to enable a one-shot topology verification for all pipelines including the dynamic ones. If the debug flag is set, all the topology component loading will be verified during the complete callback. Signed-off-by:
-
Ranjani Sridharan authored
Add support for dynamic pipelines by modifying the PCM hw_params ioctl implementation to determine the widgets required for a PCM stream by querying the list of connected DAPM widgets. This list is saved as part of snd_sof_pcm_stream struct and will be used to setup the widgets. The sof_widget_list_setup/free routines setup and free connected DAPM widgets when a PCM is opened/closed. These routines accept a list of connected DAPM widgets as input and determine the SOF widgets, their corresponding pipeline widgets and connections between them that need to be setup before the PCM is triggered. Please note that the dynamic pipeline feature will only be enabled for those pipelines whose dynamic_pipeline_widget flag is set in topologies. Add a new token called SOF_TKN_SCHED_DYNAMIC_PIPELINE that when set in topology will be applied to the dynamic_pipeline_widget flag of the pipeline widget. Signed-off-by:
-
Ranjani Sridharan authored
With the implementation of the dynamic pipeline feature, widgets will only be setup when a PCM is opened during the hw_params ioctl. The BE hw_params callback is responsible for sending the DAI_CONFIG for the DAI widgets in the DSP. With dynamic pipelines, the DAI widgets will need to set up first before sending the DAI_CONFIG IPC in the BE hw_params. Update the BE hw_params/hw_free callbacks for all ALH, HDA and SSP DAIs to set up/free the DAI widget before/after DAI_CONFIG IPC. Signed-off-by:
-
Ranjani Sridharan authored
Add a new field, use_count to struct snd_sof_widget to keep track of the usage count for each widget. Since widgets can belong to multiple pipelines, this field will ensure that the widget is setup only when the first pipeline that needs it is started and freed when the last pipeline that needs it is stopped. There is no need to protect the widget use_count access as the core already handles mutual exclusion at the PCM level. Add a new helper sof_widget_free() to handle freeing the SOF widgets and export the sof_widget_setup/free() functions. Signed-off-by:
-
Ranjani Sridharan authored
In preparation for supporting dynamic pipelines, move the widget setup, DAI config IPCs to the complete callback during topology loading. For current topology where all the pipelines are static, all the pipelines will be set up during complete. For topologies with dynamic and static pipelines, this will enable setting up only the static ones during topology loading. Reuse the sof_restore_pipelines() function for this purpose and rename it to sof_set_up_pipelines(). Signed-off-by:
-
Ranjani Sridharan authored
Restore kcontrols for each widget after it has been set up successfully. Signed-off-by:
Seppo Ingalsuo <seppo.ingalsuo@intel.com> Signed-off-by:
-
Ranjani Sridharan authored
Add two new fields to save the source widget and sink widget pointers in struct snd_sof_route to make it easier to look up routes by source/sink widget. Also, add a flag to indicate if the route has been set up in the DSP. These will be used when the dynamic pipeline feature is implemented and routes will have to be set up at run time. Also, add a new sof_tear_down_pipelines() callback, that will used to reset the set up status for all routes during suspend. Signed-off-by:
-
Ranjani Sridharan authored
Export a couple of DAPM functions that can be used by ASoC drivers to determine connected widgets when a PCM is started. Signed-off-by:
-
Ranjani Sridharan authored
Refactor the existing code to use helper functions to set up/free widgets, send dai config and set up kcontrols for widgets. These will be reused later on for setting up widgets in the connected DAPM widgets list for a particular PCM when the dynamic pipeline feature is implemented. Signed-off-by:
-
Ranjani Sridharan authored
Today, we set up all widgets required for all PCM streams at the time of topology parsing even if they are not used. An optimization would be to only set up the widgets required for currently active PCM streams. This would give the FW the opportunity to power gate unused memory blocks, thereby saving power. For dynamic pipelines, the widgets in the connected DAPM path for each PCM will need to be set up at runtime. This patch introduces a new token, DYNAMIC_PIPELINE, for scheduler type widgets that indicate whether a pipeline should be set up statically during topology load or at runtime when the PCM is opened. Introduce a new field called dynamic_pipeline_widget in struct snd_sof_widget to save the value of the parsed token. The token is set only for the pipeline (scheduler type) widget and must be propagated to all widgets in the same pipeline during topology load. Introduce another field called pipe_widget in struct snd_sof_widget that saves the pointer to the scheduler widget with the same pipeline ID as that of the widget. This field is populated when the pipeline completion callback is invoked during topology loading. Signed-off-by:
-
Ranjani Sridharan authored
Add a new field to save the access setting for all controls in struct snd_sof_control. This will be used to ensure that only widgets belonging to static pipelines have volatile controls. Signed-off-by:
-
