With the 64KB page granularity support on ARM64, a Linux page may be
split accross multiple grant.

Currently we have the helper gnttab_foreach_grant_in_grant to break a
Linux page based on an offset and a len, but it doesn't fit when we only
have a number of grants in hand.

Introduce a new helper which take an array of Linux page and a number of
grant and will figure out the address of each grant.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Linux may use a different page size than the size of grant. So make
clear that the order is actually in number of grant.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Correct a comment in arch/arm/xen/enlighten.c referencing a wrong
source file.
Signed-off-by: Juergen Gross <jgross@suse.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

__u32, __u64 etc. are preferred for userspace API headers.
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

__u32, __u64 etc. are preferred for userspace API headers.
Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The type of the item in frame_list is xen_pfn_t which is not an unsigned
long on ARM but an uint64_t.

With the current computation, the size of frame_list will be 2 *
PAGE_SIZE rather than PAGE_SIZE.

I bet it's just mistake when the type has been switched from "unsigned
long" to "xen_pfn_t" in commit 965c0aaa
"xen: balloon: use correct type for frame_list".
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Swiotlb is used on ARM64 to support DMA on platform where devices are
not protected by an SMMU. Furthermore it's only enabled for DOM0.

While Xen is always using 4KB page granularity in the stage-2 page table,
Linux ARM64 may either use 4KB or 64KB. This means that a Linux page
can be spanned accross multiple Xen page.

The Swiotlb code has to validate that the buffer used for DMA is
physically contiguous in the memory. As a Linux page can't be shared
between local memory and foreign page by design (the balloon code always
removing entirely a Linux page), the changes in the code are very
minimal because we only need to check the first Xen PFN.

Note that it may be possible to optimize the function
check_page_physically_contiguous to avoid looping over every Xen PFN
for local memory. Although I will let this optimization for a follow-up.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

With 64KB page granularity support, the frame number will be different.

It will be easier to modify the behavior in a single place rather than
in each caller.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The hypercall interface is always using 4KB page granularity. This is
requiring to use xen page definition macro when we deal with hypercall.

Note that pfn_to_gfn is working with a Xen pfn (i.e 4KB). We may want to
rename pfn_gfn to make this explicit.

We also allocate a 64KB page for the shared page even though only the
first 4KB is used. I don't think this is really important for now as it
helps to have the pointer 4KB aligned (XENMEM_add_to_physmap is taking a
Xen PFN).
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The hypercall interface (as well as the toolstack) is always using 4KB
page granularity. When the toolstack is asking for mapping a series of
guest PFN in a batch, it expects to have the page map contiguously in
its virtual memory.

When Linux is using 64KB page granularity, the privcmd driver will have
to map multiple Xen PFN in a single Linux page.

Note that this solution works on page granularity which is a multiple of
4KB.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The PV network protocol is using 4KB page granularity. The goal of this
patch is to allow a Linux using 64KB page granularity working as a
network backend on a non-modified Xen.

It's only necessary to adapt the ring size and break skb data in small
chunk of 4KB. The rest of the code is relying on the grant table code.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The PV network protocol is using 4KB page granularity. The goal of this
patch is to allow a Linux using 64KB page granularity using network
device on a non-modified Xen.

It's only necessary to adapt the ring size and break skb data in small
chunk of 4KB. The rest of the code is relying on the grant table code.

Note that we allocate a Linux page for each rx skb but only the first
4KB is used. We may improve the memory usage by extending the size of
the rx skb.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The PV block protocol is using 4KB page granularity. The goal of this
patch is to allow a Linux using 64KB page granularity behaving as a
block backend on a non-modified Xen.

It's only necessary to adapt the ring size and the number of request per
indirect frames. The rest of the code is relying on the grant table
code.

Note that the grant table code is allocating a Linux page per grant
which will result to waste 6OKB for every grant when Linux is using 64KB
page granularity. This could be improved by sharing the page between
multiple grants.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: "Roger Pau Monné" <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The PV block protocol is using 4KB page granularity. The goal of this
patch is to allow a Linux using 64KB page granularity using block
device on a non-modified Xen.

The block API is using segment which should at least be the size of a
Linux page. Therefore, the driver will have to break the page in chunk
of 4K before giving the page to the backend.

When breaking a 64KB segment in 4KB chunks, it is possible that some
chunks are empty. As the PV protocol always require to have data in the
chunk, we have to count the number of Xen page which will be in use and
avoid sending empty chunks.

Note that, a pre-defined number of grants are reserved before preparing
the request. This pre-defined number is based on the number and the
maximum size of the segments. If each segment contains a very small
amount of data, the driver may reserve too many grants (16 grants is
reserved per segment with 64KB page granularity).

Furthermore, in the case of persistent grants we allocate one Linux page
per grant although only the first 4KB of the page will be effectively
in use. This could be improved by sharing the page with multiple grants.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The Xen interface is using 4KB page granularity. This means that each
grant is 4KB.

The current implementation allocates a Linux page per grant. On Linux
using 64KB page granularity, only the first 4KB of the page will be
used.

We could decrease the memory wasted by sharing the page with multiple
grant. It will require some care with the {Set,Clear}ForeignPage macro.

Note that no changes has been made in the x86 code because both Linux
and Xen will only use 4KB page granularity.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Only use the first 4KB of the page to store the events channel info. It
means that we will waste 60KB every time we allocate page for:
     * control block: a page is allocating per CPU
     * event array: a page is allocating everytime we need to expand it

I think we can reduce the memory waste for the 2 areas by:

    * control block: sharing between multiple vCPUs. Although it will
    require some bookkeeping in order to not free the page when the CPU
    goes offline and the other CPUs sharing the page still there

    * event array: always extend the array event by 64K (i.e 16 4K
    chunk). That would require more care when we fail to expand the
    event channel.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

For ARM64 guests, Linux is able to support either 64K or 4K page
granularity. Although, the hypercall interface is always based on 4K
page granularity.

With 64K page granularity, a single page will be spread over multiple
Xen frame.

To avoid splitting the page into 4K frame, take advantage of the
extent_order field to directly allocate/free chunk of the Linux page
size.

Note that PVMMU is only used for PV guest (which is x86) and the page
granularity is always 4KB. Some BUILD_BUG_ON has been added to ensure
that because the code has not been modified.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The console ring is always based on the page granularity of Xen.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

All the ring (xenstore, and PV rings) are always based on the page
granularity of Xen.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

On ARM all dma-capable devices on a same platform may not be protected
by an IOMMU. The DMA requests have to use the BFN (i.e MFN on ARM) in
order to use correctly the device.

While the DOM0 memory is allocated in a 1:1 fashion (PFN == MFN), grant
mapping will screw this contiguous mapping.

When Linux is using 64KB page granularitary, the page may be split
accross multiple non-contiguous MFN (Xen is using 4KB page
granularity). Therefore a DMA request will likely fail.

Checking that a 64KB page is using contiguous MFN is tedious. For
now, always says that biovec are not mergeable.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Prepare the code to support 64KB page granularity. The first
implementation will use a full Linux page per indirect and persistent
grant. When non-persistent grant is used, each page of a bio request
may be split in multiple grant.

Furthermore, the field page of the grant structure is only used to copy
data from persistent grant or indirect grant. Avoid to set it for other
use case as it will have no meaning given the page will be split in
multiple grant.

Provide 2 functions, to setup indirect grant, the other for bio page.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

All the usage of the field pfn are done using the same idiom:

pfn_to_page(grant->pfn)

This will  return always the same page. Store directly the page in the
grant to clean up the code.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Roger Pau Monné <roger.pau@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Currently, blkif_queue_request has 2 distinct execution path:
    - Send a discard request
    - Send a read/write request

The function is also allocating grants to use for generating the
request. Although, this is only used for read/write request.

Rather than having a function with 2 distinct execution path, separate
the function in 2. This will also remove one level of tabulation.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Roger Pau Monné <roger.pau@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Many PV drivers contain the idiom:

pfn = page_to_gfn(...) /* Or similar */
gnttab_grant_foreign_access_ref

Replace it by a new helper. Note that when Linux is using a different
page granularity than Xen, the helper only gives access to the first 4KB
grant.

This is useful where drivers are allocating a full Linux page for each
grant.

Also include xen/interface/grant_table.h rather than xen/grant_table.h in
asm/page.h for x86 to fix a compilation issue [1]. Only the former is
useful in order to get the structure definition.

[1] Interdependency between asm/page.h and xen/grant_table.h which result
to page_mfn not being defined when necessary.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Currently, a grant is always based on the Xen page granularity (i.e
4KB). When Linux is using a different page granularity, a single page
will be split between multiple grants.

The new helpers will be in charge of splitting the Linux page into grants
and call a function given by the caller on each grant.

Also provide an helper to count the number of grants within a given
contiguous region.

Note that the x86/include/asm/xen/page.h is now including
xen/interface/grant_table.h rather than xen/grant_table.h. It's
necessary because xen/grant_table.h depends on asm/xen/page.h and will
break the compilation. Furthermore, only definition in
interface/grant_table.h is required.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The Xen hypercall interface is always using 4K page granularity on ARM
and x86 architecture.

With the incoming support of 64K page granularity for ARM64 guest, it
won't be possible to re-use the Linux page definition in Xen drivers.

Introduce Xen page definition helpers based on the Linux page
definition. They have exactly the same name but prefixed with
XEN_/xen_ prefix.

Also modify xen_page_to_gfn to use new Xen page definition.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

They are not used in common code expect in one place in balloon.c which is
only compiled when Linux is using PV MMU. It's not the case on ARM.

Rather than worrying how to handle the 64KB case, drop them.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

The skb doesn't change within the function. Therefore it's only
necessary to check if we need GSO once at the beginning.
Signed-off-by: Julien Grall <julien.grall@citrix.com>
Acked-by: Wei Liu <wei.liu2@citrix.com>
Signed-off-by: David Vrabel <david.vrabel@citrix.com>

Pages returned by alloc_xenballooned_pages() will be used for grant
mapping which will call set_phys_to_machine() (in PV guests).

Ballooned pages are set as INVALID_P2M_ENTRY in the p2m and thus may
be using the (shared) missing tables and a subsequent
set_phys_to_machine() will need to allocate new tables.

Since the grant mapping may be done from a context that cannot sleep,
the p2m entries must already be allocated.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>

Rename alloc_p2m() to xen_alloc_p2m_entry() and export it.

This is useful for ensuring that a p2m entry is allocated (i.e., not a
shared missing or identity entry) so that subsequent set_phys_to_machine()
calls will require no further allocations.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v3:
- Make xen_alloc_p2m_entry() a nop on auto-xlate guests.

alloc_xenballooned_pages() is used to get ballooned pages to back
foreign mappings etc.  Instead of having to balloon out real pages,
use (if supported) hotplugged memory.

This makes more memory available to the guest and reduces
fragmentation in the p2m.

This is only enabled if the xen.balloon.hotplug_unpopulated sysctl is
set to 1.  This sysctl defaults to 0 in case the udev rules to
automatically online hotplugged memory do not exist.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v3:
- Add xen.balloon.hotplug_unpopulated sysctl to enable use of hotplug
  for unpopulated pages.

All users of alloc_xenballoon_pages() wanted low memory pages, so
remove the option for high memory.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>

Now that we track the total number of pages (included hotplugged
regions), it is easy to determine if more memory needs to be
hotplugged.

Add a new BP_WAIT state to signal that the balloon process needs to
wait until kicked by the memory add notifier (when the new section is
onlined by userspace).
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v3:
- Return BP_WAIT if enough sections are already hotplugged.

v2:
- New BP_WAIT status after adding new memory sections.

The stats used for memory hotplug make no sense and are fiddled with
in odd ways.  Remove them and introduce total_pages to track the total
number of pages (both populated and unpopulated) including those within
hotplugged regions (note that this includes not yet onlined pages).

This will be used in a subsequent commit (xen/balloon: only hotplug
additional memory if required) when deciding whether additional memory
needs to be hotplugged.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>

Instead of placing hotplugged memory at the end of RAM (which may
conflict with PCI devices or reserved regions) use allocate_resource()
to get a new, suitably aligned resource that does not conflict.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
---
v3:
- Remove stale comment.

During setup, discard RAM regions that are above the maximum
reservation (instead of marking them as E820_UNUSABLE).  This allows
hotplug memory to be placed at these addresses.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>

Commit 0bb599fd (xen: remove scratch
frames for ballooned pages and m2p override) removed the use of the
scratch page for ballooned out pages.

Remove some left over function definitions.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>

Add add_memory_resource() to add memory using an existing "System RAM"
resource.  This is useful if the memory region is being located by
finding a free resource slot with allocate_resource().

Xen guests will make use of this in their balloon driver to hotplug
arbitrary amounts of memory in response to toolstack requests.
Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
Reviewed-by: Tang Chen <tangchen@cn.fujitsu.com>

Pull i2c fixes from Wolfram Sang:
 "Here are some bugfixes for the I2C subsystem.

  Kieran found a flaw in the recently renewed wake irq handling.  Mika
  handled a user bug report where the ACPI info turned out to be
  unusable.  I updated MAINTAINERS so that such bug reports will sooner
  get to the right people.  Geert pointed me to a problem of some i2c
  drivers regarding PM which I fixed"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: designware: Do not use parameters from ACPI on Dell Inspiron 7348
  MAINTAINERS: add maintainers for Synopsis Designware I2C drivers
  i2c: designware-platdrv: enable RuntimePM before registering to the core
  i2c: s3c2410: enable RuntimePM before registering to the core
  i2c: rcar: enable RuntimePM before registering to the core
  i2c: return probe deferred status on dev_pm_domain_attach