- 20 Jun, 2022 16 commits
-
-
Sean Christopherson authored
Truncate paging32's PT_BASE_ADDR_MASK to a pt_element_t, i.e. to 32 bits. Ignoring PSE huge pages, the mask is only used in conjunction with gPTEs, which are 32 bits, and so the address is limited to bits 31:12. PSE huge pages encoded PA bits 39:32 in PTE bits 20:13, i.e. need custom logic to handle their funky encoding regardless of PT_BASE_ADDR_MASK. Note, PT_LVL_OFFSET_MASK is somewhat confusing in that it computes the offset of the _gfn_, not of the gpa, i.e. not having bits 63:32 set in PT_BASE_ADDR_MASK is again correct. No functional change intended. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20220614233328.3896033-8-seanjc@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Dedup the code for generating (most of) the per-type PT_* masks in paging_tmpl.h. The relevant macros only vary based on the number of bits per level, and that smidge of info is already provided in a common form as PT_LEVEL_BITS. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Separate the macros for KVM's shadow PTEs (SPTE) from guest 64-bit PTEs (PT64). SPTE and PT64 are _mostly_ the same, but the few differences are quite critical, e.g. *_BASE_ADDR_MASK must differentiate between host and guest physical address spaces, and SPTE_PERM_MASK (was PT64_PERM_MASK) is very much specific to SPTEs. Opportunistically (and temporarily) move most guest macros into paging.h to clearly associate them with shadow paging, and to ensure that they're not used as of this commit. A future patch will eliminate them entirely. Sadly, PT32_LEVEL_BITS is left behind in mmu_internal.h because it's needed for the quadrant calculation in kvm_mmu_get_page(). The quadrant calculation is hot enough (when using shadow paging with 32-bit guests) that adding a per-context helper is undesirable, and burying the computation in paging_tmpl.h with a forward declaration isn't exactly an improvement. Signed-off-by:
-
Sean Christopherson authored
Provide common helper macros to generate various masks, shifts, etc... for 32-bit vs. 64-bit page tables. Only the inputs differ, the actual calculations are identical. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move a handful of one-off macros and helpers for 32-bit PSE paging into paging_tmpl.h and hide them behind "PTTYPE == 32". Under no circumstance should anything but 32-bit shadow paging care about PSE paging. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Compute the number of PTEs to be filled for the 32-bit PSE page tables using the page size and the size of each entry. While using the MMU's PT32_ENT_PER_PAGE macro is arguably better in isolation, removing VMX's usage will allow a future namespacing cleanup to move the guest page table macros into paging_tmpl.h, out of the reach of code that isn't directly related to shadow paging. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use lapic_in_kernel() in kvm_vcpu_apicv_active() to take advantage of the kvm_has_noapic_vcpu static branch. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move the per-vCPU apicv_active flag into KVM's local APIC instance. APICv is fully dependent on an in-kernel local APIC, but that's not at all clear when reading the current code due to the flag being stored in the generic kvm_vcpu_arch struct. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Use kvm_vcpu_apicv_active() to check if APICv is active when seeing if a vCPU is a candidate for directed yield due to a pending ACPIv interrupt. This will allow moving apicv_active into kvm_lapic without introducing a potential NULL pointer deref (kvm_vcpu_apicv_active() effectively adds a pre-check on the vCPU having an in-kernel APIC). No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop the unused @vcpu parameter from hwapic_isr_update(). AMD/AVIC is unlikely to implement the helper, and VMX/APICv doesn't need the vCPU as it operates on the current VMCS. The result is somewhat odd, but allows for a decent amount of (future) cleanup in the APIC code. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Drop a handful of unused AVIC function declarations whose implementations were removed during the conversion to optional static calls. No functional change intended. Fixes: abb6d479 ("KVM: x86: make several APIC virtualization callbacks optional") Signed-off-by:
-
Sean Christopherson authored
Update vmcs12->guest_bndcfgs on intercepted writes to BNDCFGS from L2 instead of waiting until vmcs02 is synchronized to vmcs12. KVM always intercepts BNDCFGS accesses, so the only way the value in vmcs02 can change is via KVM's explicit VMWRITE during emulation. Signed-off-by:
-
Sean Christopherson authored
Save BNDCFGS to vmcs12 (from vmcs02) if and only if at least of one of the load-on-entry or clear-on-exit fields for BNDCFGS is enumerated as an allowed-1 bit in vmcs12. Skipping the field avoids an unnecessary VMREAD when MPX is supported but not exposed to L1. Per Intel's SDM: If the processor supports either the 1-setting of the "load IA32_BNDCFGS" VM-entry control or that of the "clear IA32_BNDCFGS" VM-exit control, the contents of the IA32_BNDCFGS MSR are saved into the corresponding field. Signed-off-by:
-
Sean Christopherson authored
Rename the fields in struct nested_vmx used to snapshot pre-VM-Enter values to reflect that they can hold L2's values when restoring nested state, e.g. if userspace restores MSRs before nested state. As crazy as it seems, restoring MSRs before nested state actually works (because KVM goes out if it's way to make it work), even though the initial MSR writes will hit vmcs01 despite holding L2 values. Add a related comment to vmx_enter_smm() to call out that using the common VM-Exit and VM-Enter helpers to emulate SMI and RSM is wrong and broken. The few MSRs that have snapshots _could_ be fixed by taking a snapshot prior to the forced VM-Exit instead of at forced VM-Enter, but that's just the tip of the iceberg as the rather long list of MSRs that aren't snapshotted (hello, VM-Exit MSR load list) can't be handled this way. Signed-off-by:
-
Sean Christopherson authored
If a nested run isn't pending, snapshot vmcs01.GUEST_IA32_DEBUGCTL irrespective of whether or not VM_ENTRY_LOAD_DEBUG_CONTROLS is set in vmcs12. When restoring nested state, e.g. after migration, without a nested run pending, prepare_vmcs02() will propagate nested.vmcs01_debugctl to vmcs02, i.e. will load garbage/zeros into vmcs02.GUEST_IA32_DEBUGCTL. If userspace restores nested state before MSRs, then loading garbage is a non-issue as loading DEBUGCTL will also update vmcs02. But if usersepace restores MSRs first, then KVM is responsible for propagating L2's value, which is actually thrown into vmcs01, into vmcs02. Restoring L2 MSRs into vmcs01, i.e. loading all MSRs before nested state is all kinds of bizarre and ideally would not be supported. Sadly, some VMMs do exactly that and rely on KVM to make things work. Note, there's still a lurking SMM bug, as propagating vmcs01's DEBUGCTL to vmcs02 across RSM may corrupt L2's DEBUGCTL. But KVM's entire VMX+SMM emulation is flawed as SMI+RSM should not toouch _any_ VMCS when use the "default treatment of SMIs", i.e. when not using an SMI Transfer Monitor. Link: https://lore.kernel.org/all/Yobt1XwOfb5M6Dfa@google.com Fixes: 8fcc4b59 ("kvm: nVMX: Introduce KVM_CAP_NESTED_STATE") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
If a nested run isn't pending, snapshot vmcs01.GUEST_BNDCFGS irrespective of whether or not VM_ENTRY_LOAD_BNDCFGS is set in vmcs12. When restoring nested state, e.g. after migration, without a nested run pending, prepare_vmcs02() will propagate nested.vmcs01_guest_bndcfgs to vmcs02, i.e. will load garbage/zeros into vmcs02.GUEST_BNDCFGS. If userspace restores nested state before MSRs, then loading garbage is a non-issue as loading BNDCFGS will also update vmcs02. But if usersepace restores MSRs first, then KVM is responsible for propagating L2's value, which is actually thrown into vmcs01, into vmcs02. Restoring L2 MSRs into vmcs01, i.e. loading all MSRs before nested state is all kinds of bizarre and ideally would not be supported. Sadly, some VMMs do exactly that and rely on KVM to make things work. Note, there's still a lurking SMM bug, as propagating vmcs01.GUEST_BNDFGS to vmcs02 across RSM may corrupt L2's BNDCFGS. But KVM's entire VMX+SMM emulation is flawed as SMI+RSM should not toouch _any_ VMCS when use the "default treatment of SMIs", i.e. when not using an SMI Transfer Monitor. Link: https://lore.kernel.org/all/Yobt1XwOfb5M6Dfa@google.com Fixes: 62cf9bd8 ("KVM: nVMX: Fix emulation of VM_ENTRY_LOAD_BNDCFGS") Cc: stable@vger.kernel.org Cc: Lei Wang <lei4.wang@intel.com> Signed-off-by:
-
- 15 Jun, 2022 13 commits
-
-
Uros Bizjak authored
Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in fast_pf_fix_direct_spte. cmpxchg returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Signed-off-by:
Uros Bizjak <ubizjak@gmail.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Cc: Vitaly Kuznetsov <vkuznets@redhat.com> Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Message-Id: <20220520144635.63134-1-ubizjak@gmail.com> Signed-off-by:
-
Uros Bizjak authored
Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in pi_try_set_control. cmpxchg returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg): b9: 88 44 24 60 mov %al,0x60(%rsp) bd: 48 89 c8 mov %rcx,%rax c0: c6 44 24 62 f2 movb $0xf2,0x62(%rsp) c5: 48 8b 74 24 60 mov 0x60(%rsp),%rsi ca: f0 49 0f b1 34 24 lock cmpxchg %rsi,(%r12) d0: 48 39 c1 cmp %rax,%rcx d3: 75 cf jne a4 <vmx_vcpu_pi_load+0xa4> patched: c1: 88 54 24 60 mov %dl,0x60(%rsp) c5: c6 44 24 62 f2 movb $0xf2,0x62(%rsp) ca: 48 8b 54 24 60 mov 0x60(%rsp),%rdx cf: f0 48 0f b1 13 lock cmpxchg %rdx,(%rbx) d4: 75 d5 jne ab <vmx_vcpu_pi_load+0xab> Signed-off-by:
kernel test robot <lkp@intel.com> Message-Id: <20220520143737.62513-1-ubizjak@gmail.com> Signed-off-by:
-
Uros Bizjak authored
Use try_cmpxchg64 instead of cmpxchg64 (*ptr, old, new) != old in tdp_mmu_set_spte_atomic. cmpxchg returns success in ZF flag, so this change saves a compare after cmpxchg (and related move instruction in front of cmpxchg). Also, remove explicit assignment to iter->old_spte when cmpxchg fails, this is what try_cmpxchg does implicitly. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Sean Christopherson <seanjc@google.com> Signed-off-by:
David Matlack <dmatlack@google.com> Message-Id: <20220518135111.3535-1-ubizjak@gmail.com> Signed-off-by:
-
Sean Christopherson authored
When handling userspace MSR filter updates, recompute interception for possible passthrough MSRs if and only if KVM wants to disabled interception. If KVM wants to intercept accesses, i.e. the associated bit is set in vmx->shadow_msr_intercept, then there's no need to set the intercept again as KVM will intercept the MSR regardless of userspace's wants. No functional change intended, the call to vmx_enable_intercept_for_msr() really is just a gigantic nop. Suggested-by:
Aaron Lewis <aaronlewis@google.com> Signed-off-by:
-
Sean Christopherson authored
Drop the CMPXCHG macro from paging_tmpl.h, it's no longer used now that KVM uses a common uaccess helper to do 8-byte CMPXCHG. Fixes: f122dfe4 ("KVM: x86: Use __try_cmpxchg_user() to update guest PTE A/D bits") Signed-off-by:
-
Lai Jiangshan authored
Use root_level in svm_load_mmu_pg() rather that looking up the root level in vcpu->arch.mmu->root_role.level. svm_load_mmu_pgd() has only one caller, kvm_mmu_load_pgd(), which always passes vcpu->arch.mmu->root_role.level as root_level. Signed-off-by:
Lai Jiangshan <jiangshan.ljs@antgroup.com> Message-Id: <20220605063417.308311-7-jiangshanlai@gmail.com> Signed-off-by:
-
Lai Jiangshan authored
Since the commit c5e2184d("KVM: x86/mmu: Remove the defunct update_pte() paging hook"), kvm_mmu_pte_write() no longer uses the rmap cache. So remove mmu_topup_memory_caches() in it. Cc: Sean Christopherson <seanjc@google.com> Signed-off-by:
-
Lai Jiangshan authored
Make it use the same verb as in kvm_kick_many_cpus(). Signed-off-by:
-
Lai Jiangshan authored
It is unused. Signed-off-by:
-
Janis Schoetterl-Glausch authored
Fix the inverted logic of the memop extension capability check. Fixes: 97da92c0 ("KVM: s390: selftests: Use TAP interface in the memop test") Signed-off-by:
Janis Schoetterl-Glausch <scgl@linux.ibm.com> Message-Id: <20220614162635.3445019-1-scgl@linux.ibm.com> Signed-off-by:
-
Sean Christopherson authored
Wrap the manipulation of @role and the manual mutex_{release,acquire}() invocations in CONFIG_PROVE_LOCKING=y to squash a clang-15 warning. When building with -Wunused-but-set-parameter and CONFIG_DEBUG_LOCK_ALLOC=n, clang-15 seees there's no usage of @role in mutex_lock_killable_nested() and yells. PROVE_LOCKING selects DEBUG_LOCK_ALLOC, and the only reason KVM manipulates @role is to make PROVE_LOCKING happy. To avoid true ugliness, use "i" and "j" to detect the first pass in the loops; the "idx" field that's used by kvm_for_each_vcpu() is guaranteed to be '0' on the first pass as it's simply the first entry in the vCPUs XArray, which is fully KVM controlled. kvm_for_each_vcpu() passes '0' for xa_for_each_range()'s "start", and xa_for_each_range() will not enter the loop if there's no entry at '0'. Fixes: 0c2c7c06 ("KVM: SEV: Mark nested locking of vcpu->lock") Reported-by: -
Paolo Bonzini authored
This caused a warning on 32-bit systems, but undoubtedly would have acted funny on 64-bit as well. The fix was applied directly on merge in 5.19, see commit 24625f7d ("Merge tag for-linus of git://git.kernel.org/pub/scm/virt/kvm/kvm"). Fixes: 3743c2f0 ("KVM: x86: inhibit APICv/AVIC on changes to APIC ID or APIC base") Signed-off-by:
-
Shaoqin Huang authored
There are some parameter being removed in function but the parameter comments still exist, so remove them. Signed-off-by:
Shaoqin Huang <shaoqin.huang@intel.com> Message-Id: <20220614224126.211054-1-shaoqin.huang@intel.com> Signed-off-by:
-
- 14 Jun, 2022 5 commits
-
-
Sean Christopherson authored
Replace calls to kvm_check_cap() that treat its return as a boolean with calls to kvm_has_cap(). Several instances of kvm_check_cap() were missed when kvm_has_cap() was introduced. Reported-by:
Andrew Jones <drjones@redhat.com> Fixes: 3ea9b809 ("KVM: selftests: Add kvm_has_cap() to provide syntactic sugar") Signed-off-by:
-
Sean Christopherson authored
Remove a duplicate TEST_ASSERT() on the number of runnable vCPUs in vm_nr_pages_required() that snuck in during a rebase gone bad. Reported-by:
-
Sean Christopherson authored
Replace the goofy static_assert on the size of the @vm/@vcpu parameters with a call to a dummy helper, i.e. let the compiler naturally complain about an incompatible type instead of homebrewing a poor replacement. Reported-by:
-
Sean Christopherson authored
Add an apostrophe in a comment about it being the caller's, not callers, responsibility to free an object. Reported-by:
-
Andrew Jones authored
kvm_binary_stats_test accepts two arguments, the number of vms and number of vcpus. If these inputs are not equal then the test would likely crash for one reason or another due to using miscalculated indices for the vcpus array. Fix the index expressions by swapping the use of i and j. Signed-off-by:
-
- 11 Jun, 2022 6 commits
-
-
Sean Christopherson authored
Add a static assert to the KVM/VM/vCPU ioctl() helpers to verify that the size of the argument provided matches the expected size of the IOCTL. Because ioctl() ultimately takes a "void *", it's all too easy to pass in garbage and not detect the error until runtime. E.g. while working on a CPUID rework, selftests happily compiled when vcpu_set_cpuid() unintentionally passed the cpuid() function as the parameter to ioctl() (a local "cpuid" parameter was removed, but its use was not replaced with "vcpu->cpuid" as intended). Tweak a variety of benign issues that aren't compatible with the sanity check, e.g. passing a non-pointer for ioctls(). Note, static_assert() requires a string on older versions of GCC. Feed it an empty string to make the compiler happy. Signed-off-by:
-
Sean Christopherson authored
Use the TAP-friendly ksft_exit_skip() instead of KVM's custom print_skip() when skipping a test via __TEST_REQUIRE. KVM's "skipping test" has no known benefit, whereas some setups rely on TAP output. Signed-off-by:
-
Sean Christopherson authored
Add TEST_REQUIRE() and __TEST_REQUIRE() to replace the myriad open coded instances of selftests exiting with KSFT_SKIP after printing an informational message. In addition to reducing the amount of boilerplate code in selftests, the UPPERCASE macro names make it easier to visually identify a test's requirements. Convert usage that erroneously uses something other than print_skip() and/or "exits" with '0' or some other non-KSFT_SKIP value. Intentionally drop a kvm_vm_free() in aarch64/debug-exceptions.c as part of the conversion. All memory and file descriptors are freed on process exit, so the explicit free is superfluous. Signed-off-by:
-
Sean Christopherson authored
Add kvm_has_cap() to wrap kvm_check_cap() and return a bool for the use cases where the caller only wants check if a capability is supported, i.e. doesn't care about the value beyond whether or not it's non-zero. The "check" terminology is somewhat ambiguous as the non-boolean return suggests that '0' might mean "success", i.e. suggests that the ioctl uses the 0/-errno pattern. Provide a wrapper instead of trying to find a new name for the raw helper; the "check" terminology is derived from the name of the ioctl, so using e.g. "get" isn't a clear win. Signed-off-by:
-
Sean Christopherson authored
Return an 'unsigned int' instead of a signed 'int' from kvm_check_cap(), to make it more obvious that kvm_check_cap() can never return a negative value due to its assertion that the return is ">= 0". Signed-off-by:
-
Sean Christopherson authored
Remove DEFAULT_GUEST_PHY_PAGES and open code the magic number (with a comment) in vm_nr_pages_required(). Exposing DEFAULT_GUEST_PHY_PAGES to tests was a symptom of the VM creation APIs not cleanly supporting tests that create runnable vCPUs, but can't do so immediately. Now that tests don't have to manually compute the amount of memory needed for basic operation, make it harder for tests to do things that should be handled by the framework, i.e. force developers to improve the framework instead of hacking around flaws in individual tests. Signed-off-by:
-
