xfrm_state_put() moves struct xfrm_state to the GC list
and schedules the GC work to clean it up. On net exit call
path, xfrm_state_flush() is called to clean up and
xfrm_flush_gc() is called to wait for the GC work to complete
before exit.

However, this doesn't work because one of the ->destructor(),
ipcomp_destroy(), schedules the same GC work again inside
the GC work. It is hard to wait for such a nested async
callback. This is also why syzbot still reports the following
warning:

 WARNING: CPU: 1 PID: 33 at net/ipv6/xfrm6_tunnel.c:351 xfrm6_tunnel_net_exit+0x2cb/0x500 net/ipv6/xfrm6_tunnel.c:351
 ...
  ops_exit_list.isra.0+0xb0/0x160 net/core/net_namespace.c:153
  cleanup_net+0x51d/0xb10 net/core/net_namespace.c:551
  process_one_work+0xd0c/0x1ce0 kernel/workqueue.c:2153
  worker_thread+0x143/0x14a0 kernel/workqueue.c:2296
  kthread+0x357/0x430 kernel/kthread.c:246
  ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352

In fact, it is perfectly fine to bypass GC and destroy xfrm_state
synchronously on net exit call path, because it is in process context
and doesn't need a work struct to do any blocking work.

This patch introduces xfrm_state_put_sync() which simply bypasses
GC, and lets its callers to decide whether to use this synchronous
version. On net exit path, xfrm_state_fini() and
xfrm6_tunnel_net_exit() use it. And, as ipcomp_destroy() itself is
blocking, it can use xfrm_state_put_sync() directly too.

Also rename xfrm_state_gc_destroy() to ___xfrm_state_destroy() to
reflect this change.

Fixes: b48c05ab ("xfrm: Fix warning in xfrm6_tunnel_net_exit.")
Reported-and-tested-by: syzbot+e9aebef558e3ed673934@syzkaller.appspotmail.com
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

On ESP output, sk_wmem_alloc is incremented for the added padding if a
socket is associated to the skb. When replying with TCP SYNACKs over
IPsec, the associated sk is a casted request socket, only. Increasing
sk_wmem_alloc on a request socket results in a write at an arbitrary
struct offset. In the best case, this produces the following WARNING:

WARNING: CPU: 1 PID: 0 at lib/refcount.c:102 esp_output_head+0x2e4/0x308 [esp4]
refcount_t: addition on 0; use-after-free.
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.0.0-rc3 #2
Hardware name: Marvell Armada 380/385 (Device Tree)
[...]
[<bf0ff354>] (esp_output_head [esp4]) from [<bf1006a4>] (esp_output+0xb8/0x180 [esp4])
[<bf1006a4>] (esp_output [esp4]) from [<c05dee64>] (xfrm_output_resume+0x558/0x664)
[<c05dee64>] (xfrm_output_resume) from [<c05d07b0>] (xfrm4_output+0x44/0xc4)
[<c05d07b0>] (xfrm4_output) from [<c05956bc>] (tcp_v4_send_synack+0xa8/0xe8)
[<c05956bc>] (tcp_v4_send_synack) from [<c0586ad8>] (tcp_conn_request+0x7f4/0x948)
[<c0586ad8>] (tcp_conn_request) from [<c058c404>] (tcp_rcv_state_process+0x2a0/0xe64)
[<c058c404>] (tcp_rcv_state_process) from [<c05958ac>] (tcp_v4_do_rcv+0xf0/0x1f4)
[<c05958ac>] (tcp_v4_do_rcv) from [<c0598a4c>] (tcp_v4_rcv+0xdb8/0xe20)
[<c0598a4c>] (tcp_v4_rcv) from [<c056eb74>] (ip_protocol_deliver_rcu+0x2c/0x2dc)
[<c056eb74>] (ip_protocol_deliver_rcu) from [<c056ee6c>] (ip_local_deliver_finish+0x48/0x54)
[<c056ee6c>] (ip_local_deliver_finish) from [<c056eecc>] (ip_local_deliver+0x54/0xec)
[<c056eecc>] (ip_local_deliver) from [<c056efac>] (ip_rcv+0x48/0xb8)
[<c056efac>] (ip_rcv) from [<c0519c2c>] (__netif_receive_skb_one_core+0x50/0x6c)
[...]

The issue triggers only when not using TCP syncookies, as for syncookies
no socket is associated.

Fixes: cac2661c ("esp4: Avoid skb_cow_data whenever possible")
Fixes: 03e2a30f ("esp6: Avoid skb_cow_data whenever possible")
Signed-off-by: Martin Willi <martin@strongswan.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>

Duec to a typo, mv88e6390_serdes_irq_setup() calls itself, rather than
mv88e6390x_serdes_irq_setup(). It then blows the stack, and shortly
after the machine blows up.

Fixes: 2defda1f ("net: dsa: mv88e6xxx: Add support for SERDES on ports 2-8 for 6390X")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

When the MC route socket is closed, mroute_clean_tables() is called to
cleanup existing routes. Mistakenly notifiers call was put on the cleanup
of the unresolved MC route entries cache.
In a case where the MC socket closes before an unresolved route expires,
the notifier call leads to a crash, caused by the driver trying to
increment a non initialized refcount_t object [1] and then when handling
is done, to decrement it [2]. This was detected by a test recently added in
commit 6d4efada ("selftests: forwarding: Add multicast routing test").

Fix that by putting notifiers call on the resolved entries traversal,
instead of on the unresolved entries traversal.

[1]

[  245.748967] refcount_t: increment on 0; use-after-free.
[  245.754829] WARNING: CPU: 3 PID: 3223 at lib/refcount.c:153 refcount_inc_checked+0x2b/0x30
...
[  245.802357] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016
[  245.811873] RIP: 0010:refcount_inc_checked+0x2b/0x30
...
[  245.907487] Call Trace:
[  245.910231]  mlxsw_sp_router_fib_event.cold.181+0x42/0x47 [mlxsw_spectrum]
[  245.917913]  notifier_call_chain+0x45/0x7
[  245.922484]  atomic_notifier_call_chain+0x15/0x20
[  245.927729]  call_fib_notifiers+0x15/0x30
[  245.932205]  mroute_clean_tables+0x372/0x3f
[  245.936971]  ip6mr_sk_done+0xb1/0xc0
[  245.940960]  ip6_mroute_setsockopt+0x1da/0x5f0
...

[2]

[  246.128487] refcount_t: underflow; use-after-free.
[  246.133859] WARNING: CPU: 0 PID: 7 at lib/refcount.c:187 refcount_sub_and_test_checked+0x4c/0x60
[  246.183521] Hardware name: Mellanox Technologies Ltd. MSN2740/SA001237, BIOS 5.6.5 06/07/2016
...
[  246.193062] Workqueue: mlxsw_core_ordered mlxsw_sp_router_fibmr_event_work [mlxsw_spectrum]
[  246.202394] RIP: 0010:refcount_sub_and_test_checked+0x4c/0x60
...
[  246.298889] Call Trace:
[  246.301617]  refcount_dec_and_test_checked+0x11/0x20
[  246.307170]  mlxsw_sp_router_fibmr_event_work.cold.196+0x47/0x78 [mlxsw_spectrum]
[  246.315531]  process_one_work+0x1fa/0x3f0
[  246.320005]  worker_thread+0x2f/0x3e0
[  246.324083]  kthread+0x118/0x130
[  246.327683]  ? wq_update_unbound_numa+0x1b0/0x1b0
[  246.332926]  ? kthread_park+0x80/0x80
[  246.337013]  ret_from_fork+0x1f/0x30

Fixes: 088aa3ee ("ip6mr: Support fib notifications")
Signed-off-by: Nir Dotan <nird@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Digging through the ioctls with Al because of the previous
patches, we found that on 64-bit decnet's dn_dev_ioctl()
is wrong, because struct ifreq::ifr_ifru is actually 24
bytes (not 16 as expected from struct sockaddr) due to the
ifru_map and ifru_settings members.

Clearly, decnet expects the ioctl to be called with a struct
like
  struct ifreq_dn {
    char ifr_name[IFNAMSIZ];
    struct sockaddr_dn ifr_addr;
  };

since it does
  struct ifreq *ifr = ...;
  struct sockaddr_dn *sdn = (struct sockaddr_dn *)&ifr->ifr_addr;

This means that DN_IFREQ_SIZE is too big for what it wants on
64-bit, as it is
  sizeof(struct ifreq) - sizeof(struct sockaddr) +
  sizeof(struct sockaddr_dn)

This assumes that sizeof(struct sockaddr) is the size of ifr_ifru
but that isn't true.

Fix this to use offsetof(struct ifreq, ifr_ifru).

This indeed doesn't really matter much - the result is that we
copy in/out 8 bytes more than we should on 64-bit platforms. In
case the "struct ifreq_dn" lands just on the end of a page though
it might lead to faults.

As far as I can tell, it has been like this forever, so it seems
very likely that nobody cares.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

If phy_power_on() fails in rk_gmac_powerup(), clocks are left enabled.

Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: David S. Miller <davem@davemloft.net>

Peng Li says:

====================
net: hns: code optimizations & bugfixes for HNS driver

This patchset includes bugfixes and code optimizations for the HNS
ethernet controller driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When reading phy registers via Clause 45 MDIO protocol, after write
address operation, the driver use another write address operation, so
can not read the right value of any phy registers. This patch fixes it.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The hns driver of earlier devices, when autoneg off, restart autoneg
will return -EINVAL, so make the hns driver for the latest devices
do the same.
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In hns enet driver, we use of_parse_handle() to get hold of the
device node related to "ae-handle" but we have missed to put
the node reference using of_node_put() after we are done using
the node. This patch fixes it.

Note:
This problem is stated in Link: https://lkml.org/lkml/2018/12/22/217

Fixes: 48189d6a ("net: hns: enet specifies a reference to dsaf")
Reported-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Signed-off-by: Yonglong Liu <liuyonglong@huawei.com>
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
Mellanox, mlx5 fixes 2019-01-25

This series introduces some fixes to mlx5 driver.
For more information please see tag log below.

Please pull and let me know if there is any problem.

For -stable v4.13
('net/mlx5e: Allow MAC invalidation while spoofchk is ON')

For -stable v4.18
('Revert "net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager"')
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

When an internally generated frame is handled by rose_xmit(),
rose_route_frame() is called:

        if (!rose_route_frame(skb, NULL)) {
                dev_kfree_skb(skb);
                stats->tx_errors++;
                return NETDEV_TX_OK;
        }

We have the same code sequence in Net/Rom where an internally generated
frame is handled by nr_xmit() calling nr_route_frame(skb, NULL).
However, in this function NULL argument is tested while it is not in
rose_route_frame().
Then kernel panic occurs later on when calling ax25cmp() with a NULL
ax25_cb argument as reported many times and recently with syzbot.

We need to test if ax25 is NULL before using it.

Testing:
Built kernel with CONFIG_ROSE=y.
Signed-off-by: Bernard Pidoux <f6bvp@free.fr>
Acked-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+1a2c456a1ea08fa5b5f7@syzkaller.appspotmail.com
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Bernard Pidoux <f6bvp@free.fr>
Cc: linux-hams@vger.kernel.org
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>

If fill_level was not zero and status was not BUSY,
result of "tx_prod - tx_cons - inuse" might be zero.
Subtracting 1 unconditionally results invalid negative return value
on this case.
Make sure not to return an negative value.
Signed-off-by: Tomonori Sakita <tomonori.sakita@sord.co.jp>
Signed-off-by: Atsushi Nemoto <atsushi.nemoto@sord.co.jp>
Reviewed-by: Dalon L Westergreen <dalon.westergreen@linux.intel.com>
Acked-by: Thor Thayer <thor.thayer@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sk_reset_timer() and sk_stop_timer() properly handle
sock refcnt for timer function. Switching to them
could fix a refcounting bug reported by syzbot.

Reported-and-tested-by: syzbot+defa700d16f1bd1b9a05@syzkaller.appspotmail.com
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: linux-hams@vger.kernel.org
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Steffen Klassert says:

====================
pull request (net): ipsec 2019-01-25

1) Several patches to fix the fallout from the recent
   tree based policy lookup work. From Florian Westphal.

2) Fix VTI for IPCOMP for 'not compressed' IPCOMP packets.
   We need an extra IPIP handler to process these packets
   correctly. From Su Yanjun.

3) Fix validation of template and selector families for
   MODE_ROUTEOPTIMIZATION with ipv4-in-ipv6 packets.
   This can lead to a stack-out-of-bounds because
   flowi4 struct is treated as flowi6 struct.
   Fix from Florian Westphal.

4) Restore the default behaviour of the xfrm set-mark
   in the output path. This was changed accidentally
   when mark setting was extended to the input path.
   From Benedict Wong.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull KVM fixes from Paolo Bonzini:
 "Quite a few fixes for x86: nested virtualization save/restore, AMD
  nested virtualization and virtual APIC, 32-bit fixes, an important fix
  to restore operation on older processors, and a bunch of hyper-v
  bugfixes. Several are marked stable.

  There are also fixes for GCC warnings and for a GCC/objtool interaction"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: Mark expected switch fall-throughs
  KVM: x86: fix TRACE_INCLUDE_PATH and remove -I. header search paths
  KVM: selftests: check returned evmcs version range
  x86/kvm/hyper-v: nested_enable_evmcs() sets vmcs_version incorrectly
  KVM: VMX: Move vmx_vcpu_run()'s VM-Enter asm blob to a helper function
  kvm: selftests: Fix region overlap check in kvm_util
  kvm: vmx: fix some -Wmissing-prototypes warnings
  KVM: nSVM: clear events pending from svm_complete_interrupts() when exiting to L1
  svm: Fix AVIC incomplete IPI emulation
  svm: Add warning message for AVIC IPI invalid target
  KVM: x86: WARN_ONCE if sending a PV IPI returns a fatal error
  KVM: x86: Fix PV IPIs for 32-bit KVM host
  x86/kvm/hyper-v: recommend using eVMCS only when it is enabled
  x86/kvm/hyper-v: don't recommend doing reset via synthetic MSR
  kvm: x86/vmx: Use kzalloc for cached_vmcs12
  KVM: VMX: Use the correct field var when clearing VM_ENTRY_LOAD_IA32_PERF_GLOBAL_CTRL
  KVM: x86: Fix single-step debugging
  x86/kvm/hyper-v: don't announce GUEST IDLE MSR support

Pull dma-mapping fix from Christoph Hellwig:
 "Fix a xen-swiotlb regression on arm64"

* tag 'dma-mapping-5.0-2' of git://git.infradead.org/users/hch/dma-mapping:
  arm64/xen: fix xen-swiotlb cache flushing

Pull libnvdimm fixes from Dan Williams:
 "A fix for namespace label support for non-Intel NVDIMMs that implement
  the ACPI standard label method.

  This has apparently never worked and could wait for v5.1. However it
  has enough visibility with hardware vendors [1] and distro bug
  trackers [2], and low enough risk that I decided it should go in for
  -rc4. The other fixups target the new, for v5.0, nvdimm security
  functionality. The larger init path fixup closes a memory leak and a
  potential userspace lockup due to missed notifications.

    [1] https://github.com/pmem/ndctl/issues/78
    [2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1811785

  These have all soaked in -next for a week with no reported issues.

  Summary:

   - Fix support for NVDIMMs that implement the ACPI standard label
     methods.

   - Fix error handling for security overwrite (memory leak / userspace
     hang condition), and another one-line security cleanup"

* tag 'libnvdimm-fixes-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  acpi/nfit: Fix command-supported detection
  acpi/nfit: Block function zero DSMs
  libnvdimm/security: Require nvdimm_security_setup_events() to succeed
  nfit_test: fix security state pull for nvdimm security nfit_test

Pull input fixes from Dmitry Torokhov:
 "A fixup for the input_event fix for y2038 Sparc64, and couple other
  minor fixes"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: input_event - fix the CONFIG_SPARC64 mixup
  Input: olpc_apsp - assign priv->dev earlier
  Input: uinput - fix undefined behavior in uinput_validate_absinfo()
  Input: raspberrypi-ts - fix link error
  Input: xpad - add support for SteelSeries Stratus Duo
  Input: input_event - provide override for sparc64

Pull networking fixes from David Miller:

 1) Count ttl-dropped frames properly in mac80211, from Bob Copeland.

 2) Integer overflow in ktime handling of bcm can code, from Oliver
    Hartkopp.

 3) Fix RX desc handling wrt. hw checksumming in ravb, from Simon
    Horman.

 4) Various hash key fixes in hv_netvsc, from Haiyang Zhang.

 5) Use after free in ax25, from Eric Dumazet.

 6) Several fixes to the SSN support in SCTP, from Xin Long.

 7) Do not process frames after a NAPI reschedule in ibmveth, from
    Thomas Falcon.

 8) Fix NLA_POLICY_NESTED arguments, from Johannes Berg.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (42 commits)
  qed: Revert error handling changes.
  cfg80211: extend range deviation for DMG
  cfg80211: reg: remove warn_on for a normal case
  mac80211: Add attribute aligned(2) to struct 'action'
  mac80211: don't initiate TDLS connection if station is not associated to AP
  nl80211: fix NLA_POLICY_NESTED() arguments
  ibmveth: Do not process frames after calling napi_reschedule
  net: dev_is_mac_header_xmit() true for ARPHRD_RAWIP
  net: usb: asix: ax88772_bind return error when hw_reset fail
  MAINTAINERS: Update cavium networking drivers
  net/mlx4_core: Fix error handling when initializing CQ bufs in the driver
  net/mlx4_core: Add masking for a few queries on HCA caps
  sctp: set flow sport from saddr only when it's 0
  sctp: set chunk transport correctly when it's a new asoc
  sctp: improve the events for sctp stream adding
  sctp: improve the events for sctp stream reset
  ip_tunnel: Make none-tunnel-dst tunnel port work with lwtunnel
  ax25: fix possible use-after-free
  sfc: suppress duplicate nvmem partition types in efx_ef10_mtd_probe
  hv_netvsc: fix typos in code comments
  ...

Pull smb3 fixes from Steve French:
 "A set of small smb3 fixes, some fixing various crediting issues
  discovered during xfstest runs, five for stable"

* tag '5.0-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: print CIFSMaxBufSize as part of /proc/fs/cifs/DebugData
  smb3: add credits we receive from oplock/break PDUs
  CIFS: Fix mounts if the client is low on credits
  CIFS: Do not assume one credit for async responses
  CIFS: Fix credit calculations in compound mid callback
  CIFS: Fix credit calculation for encrypted reads with errors
  CIFS: Fix credits calculations for reads with errors
  CIFS: Do not reconnect TCP session in add_credits()
  smb3: Cleanup license mess
  CIFS: Fix possible hang during async MTU reads and writes
  cifs: fix memory leak of an allocated cifs_ntsd structure

Pull VFIO fixes from Alex Williamson:

 - cleanup licenses in new files (Thomas Gleixner)

 - cleanup new compiler warnings (Alexey Kardashevskiy)

* tag 'vfio-v5.0-rc4' of git://github.com/awilliam/linux-vfio:
  vfio-pci/nvlink2: Fix ancient gcc warnings
  vfio/pci: Cleanup license mess

Pull SCSI fixes from James Bottomley:
 "Six fixes, all of which appear to have user visible consequences.

  The DMA one is a regression fix from the merge window and of the
  others, four are driver specific and one specific to the target code"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: ufs: Use explicit access size in ufshcd_dump_regs
  scsi: tcmu: fix use after free
  scsi: csiostor: fix NULL pointer dereference in csio_vport_set_state()
  scsi: lpfc: nvmet: avoid hang / use-after-free when destroying targetport
  scsi: lpfc: nvme: avoid hang / use-after-free when destroying localport
  scsi: communicate max segment size to the DMA mapping code

Pull block fixes from Jens Axboe:
 "A collection of fixes for this release. This contains:

   - Silence sparse rightfully complaining about non-static wbt
     functions (Bart)

   - Fixes for the zoned comments/ioctl documentation (Damien)

   - direct-io fix that's been lingering for a while (Ernesto)

   - cgroup writeback fix (Tejun)

   - Set of NVMe patches for nvme-rdma/tcp (Sagi, Hannes, Raju)

   - Block recursion tracking fix (Ming)

   - Fix debugfs command flag naming for a few flags (Jianchao)"

* tag 'for-linus-20190125' of git://git.kernel.dk/linux-block:
  block: Fix comment typo
  uapi: fix ioctl documentation
  blk-wbt: Declare local functions static
  blk-mq: fix the cmd_flag_name array
  nvme-multipath: drop optimization for static ANA group IDs
  nvmet-rdma: fix null dereference under heavy load
  nvme-rdma: rework queue maps handling
  nvme-tcp: fix timeout handler
  nvme-rdma: fix timeout handler
  writeback: synchronize sync(2) against cgroup writeback membership switches
  block: cover another queue enter recursion via BIO_QUEUE_ENTERED
  direct-io: allow direct writes to empty inodes

This is new code and not bug fixes.

This reverts all changes added by merge commit
8fb18be9Signed-off-by: David S. Miller <davem@davemloft.net>

Pull MMC fixes from Ulf Hansson:

 - sdhci-acpi: Fixup build dependency for PCI

 - sdhci-omap: Resolve Kconfig warnings on keystone

 - sdhci-iproc: Propagate errors from DT parsing

 - meson-gx: Fixup IRQ handling in release callback

 - meson-gx: Use signal re-sampling to fixup tuning

 - dw_mmc-bluefield: Fix the license information

* tag 'mmc-v5.0-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: dw_mmc-bluefield: : Fix the license information
  mmc: meson-gx: enable signal re-sampling together with tuning
  mmc: sdhci-iproc: handle mmc_of_parse() errors during probe
  mmc: meson-gx: Free irq in release() callback
  mmc: host: Fix Kconfig warnings on keystone_defconfig
  mmc: sdhci-acpi: Make PCI dependency explicit

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes to resolve some
  reported issues, as well as a number of binderfs fixups that were
  found after auditing the filesystem code by Al Viro. As binderfs
  hasn't been in a previous release yet, it's good to get these in now
  before the first users show up.

  All of these have been in linux-next for a bit with no reported
  issues"

* tag 'char-misc-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  i3c: master: Fix an error checking typo in 'cdns_i3c_master_probe()'
  binderfs: switch from d_add() to d_instantiate()
  binderfs: drop lock in binderfs_binder_ctl_create
  binderfs: kill_litter_super() before cleanup
  binderfs: rework binderfs_binder_device_create()
  binderfs: rework binderfs_fill_super()
  binderfs: prevent renaming the control dentry
  binderfs: remove outdated comment
  binderfs: use __u32 for device numbers
  binderfs: use correct include guards in header
  misc: pvpanic: fix warning implicit declaration
  char/mwave: fix potential Spectre v1 vulnerability
  misc: ibmvsm: Fix potential NULL pointer dereference
  binderfs: fix error return code in binderfs_fill_super()
  mei: me: add denverton innovation engine device IDs
  mei: me: mark LBG devices as having dma support
  mei: dma: silent the reject message
  binderfs: handle !CONFIG_IPC_NS builds
  binderfs: reserve devices for initial mount
  binderfs: rename header to binderfs.h
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.0-rc4.

  They resolve some reported bugs and add a new device id for one
  driver. Nothing major at all, but all good to have.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: android: ion: Support cpu access during dma_buf_detach
  staging: rtl8723bs: Fix build error with Clang when inlining is disabled
  staging: rtl8188eu: Add device code for D-Link DWA-121 rev B1
  staging: vchiq: Fix local event signalling
  Staging: wilc1000: unlock on error in init_chip()
  staging: wilc1000: fix memory leak in wilc_add_rx_gtk
  staging: wilc1000: fix registration frame size

Pull tty/serial driver fixes from Greg KH:
 "Here are a number of small tty core and serial driver fixes for
  5.0-rc4 to resolve some reported issues.

  Nothing major, the small serial driver fixes, a tty core fixup for a
  crash that was reported, and some good vt fixes from Nicolas Pitre as
  he seems to be auditing that chunk of code a lot lately.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'tty-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: fsl_lpuart: fix maximum acceptable baud rate with over-sampling
  tty: serial: qcom_geni_serial: Allow mctrl when flow control is disabled
  tty: Handle problem if line discipline does not have receive_buf
  vgacon: unconfuse vc_origin when using soft scrollback
  vt: invoke notifier on screen size change
  vt: always call notifier with the console lock held
  vt: make vt_console_print() compatible with the unicode screen buffer
  tty/n_hdlc: fix __might_sleep warning
  serial: 8250: Fix serial8250 initialization crash
  uart: Fix crash in uart_write and uart_put_char

Pull USB/PHY fixes from Greg KH:
 "Here are a number of small USB and PHY driver fixes for 5.0-rc4.

  Nothing major at all, just the usual selection of USB gadget bugfixes,
  some new USB serial driver ids, some SPDX fixes, and some PHY driver
  fixes for reported issues.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-5.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: serial: keyspan_usa: add proper SPDX lines for .h files
  USB: EHCI: ehci-mv: add MODULE_DEVICE_TABLE
  USB: leds: fix regression in usbport led trigger
  usb: chipidea: fix static checker warning for NULL pointer
  MAINTAINERS: email address update in MAINTAINERS entries
  USB: usbip: delete README file
  USB: serial: pl2303: add new PID to support PL2303TB
  usb: dwc2: gadget: Fix Remote Wakeup interrupt bit clearing
  phy: ath79-usb: Fix the main reset name to match the DT binding
  phy: ath79-usb: Fix the power on error path
  phy: fix build breakage: add PHY_MODE_SATA
  phy: ti: ensure priv is not null before dereferencing it
  USB: serial: ftdi_sio: fix GPIO not working in autosuspend
  usb: gadget: Potential NULL dereference on allocation error
  usb: dwc3: gadget: Fix the uninitialized link_state when udc starts
  usb: dwc3: gadget: Clear req->needs_extra_trb flag on cleanup
  usb: dwc3: gadget: synchronize_irq dwc irq in suspend
  USB: serial: simple: add Motorola Tetra TPG2200 device id

It turns out that libvirt uses 0-vid as a default if no vlan was
set for the guest (which is the case for switchdev mode) and errs
if we disallow that:

error: Failed to start domain vm75
error: Cannot set interface MAC/vlanid to 6a:66:2d:48:92:c2/0 \
		for ifname enp59s0f0 vf 0: Operation not supported

So allow this in order not to break existing systems.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Maor Dickman <maord@mellanox.com>
Reviewed-by: Gavi Teitz <gavi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

With VF LAG commit 491c37e4 "net/mlx5e: In case of LAG, one switch
parent id is used for all representors", both uplinks and all the VFs
(on both of them) get the same switchdev id.

This cause the provisioning system method to identify the rep of a given
VF from the parent PF PCI device using switchev id and physical port
name to break, since VFm of PF0 will have the (id, name) as VFm of PF1.

To fix that, we align to use the framework agreed upstream and set by
nfp commit 168c478e "nfp: wire get_phys_port_name on representors":

$ cat /sys/class/net/eth4_*/phys_port_name
p0
pf0vf0
pf0vf1

Now, the names will be different, e.g. pf0vf0 vs. pf1vf0.

Fixes: 491c37e4 ("net/mlx5e: In case of LAG, one switch parent id is used for all representors")
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Reported-by: Waleed Musa <waleedm@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Prior to this patch the driver prohibited spoof checking on invalid MAC.
Now the user can set this configuration if it wishes to.

This is required since libvirt might invalidate the VF Mac by setting it
to zero, while spoofcheck is ON.

Fixes: 1ab2068a ("net/mlx5: Implement vports admin state backup/restore")
Signed-off-by: Aya Levin <ayal@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

The lock in qp_table might be taken from process context or from
interrupt context. This may lead to a deadlock unless it is taken with
IRQs disabled.

Discovered by lockdep

================================
WARNING: inconsistent lock state
4.20.0-rc6
--------------------------------
inconsistent {HARDIRQ-ON-W} -> {IN-HARDIRQ-W}

python/12572 [HC1[1]:SC0[0]:HE0:SE1] takes:
00000000052a4df4 (&(&table->lock)->rlock#2){?.+.}, /0x50 [mlx5_core]
{HARDIRQ-ON-W} state was registered at:
  _raw_spin_lock+0x33/0x70
  mlx5_get_rsc+0x1a/0x50 [mlx5_core]
  mlx5_ib_eqe_pf_action+0x493/0x1be0 [mlx5_ib]
  process_one_work+0x90c/0x1820
  worker_thread+0x87/0xbb0
  kthread+0x320/0x3e0
  ret_from_fork+0x24/0x30
irq event stamp: 103928
hardirqs last  enabled at (103927): [] nk+0x1a/0x1c
hardirqs last disabled at (103928): [] unk+0x1a/0x1c
softirqs last  enabled at (103924): [] tcp_sendmsg+0x31/0x40
softirqs last disabled at (103922): [] 80

other info that might help us debug this:
 Possible unsafe locking scenario:

       CPU0
       ----
  lock(&(&table->lock)->rlock#2);

    lock(&(&table->lock)->rlock#2);

 *** DEADLOCK ***

Fixes: 032080ab ("IB/mlx5: Lock QP during page fault handling")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

MLX5E_PFLAG_* definitions were changed from bitmask to enumerated
values. However, in mlx5e_open_rq(), the proper API (MLX5E_GET_PFLAG macro)
was not used to read the flag value of MLX5E_PFLAG_RX_NO_CSUM_COMPLETE.
Fixed it.

Fixes: 8ff57c18 ("net/mlx5e: Improve ethtool private-flags code structure")
Signed-off-by: Shay Agroskin <shayag@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

This reverts commit 5f5991f3.

With the original commit, eswitch instance will not be initialized for
a function which is vport group manager but not eswitch manager such as
host PF on SmartNIC (BlueField) card. This will result in a kernel crash
when such a vport group manager is trying to access vports in its group.
E.g, PF vport manager (not eswitch manager) tries to configure the MAC
of its VF vport, a kernel trace will happen similar as bellow:

 BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
 ...
 RIP: 0010:mlx5_eswitch_get_vport_config+0xc/0x180 [mlx5_core]
 ...

Fixes: 5f5991f3 ("net/mlx5e: E-Switch, Initialize eswitch only if eswitch manager")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reported-by: Yuval Avnery <yuvalav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge tag 'mac80211-for-davem-2019-01-25' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211

Johannes Berg says:

====================
Just a few small fixes:
 * avoid trying to operate TDLS when not connection,
   this is not valid and led to issues
 * count TTL-dropped frames in mesh better
 * deal with new WiGig channels in regulatory code
 * remove a WARN_ON() that can trigger due to benign
   races during device/driver registration
 * fix nested netlink policy maxattrs (syzkaller)
 * fix hwsim n_limits (syzkaller)
 * propagate __aligned(2) to a surrounding struct
 * return proper error in virt_wifi error path
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

In preparation to enabling -Wimplicit-fallthrough, mark switch
cases where we are expecting to fall through.

This patch fixes the following warnings:

arch/x86/kvm/lapic.c:1037:27: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/lapic.c:1876:3: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/hyperv.c:1637:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/svm.c:4396:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/mmu.c:4372:36: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:3835:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/x86.c:7938:23: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:2015:6: warning: this statement may fall through [-Wimplicit-fallthrough=]
arch/x86/kvm/vmx/vmx.c:1773:6: warning: this statement may fall through [-Wimplicit-fallthrough=]

Warning level 3 was used: -Wimplicit-fallthrough=3

This patch is part of the ongoing efforts to enabling -Wimplicit-fallthrough.
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The header search path -I. in kernel Makefiles is very suspicious;
it allows the compiler to search for headers in the top of $(srctree),
where obviously no header file exists.

The reason of having -I. here is to make the incorrectly set
TRACE_INCLUDE_PATH working.

As the comment block in include/trace/define_trace.h says,
TRACE_INCLUDE_PATH should be a relative path to the define_trace.h

Fix the TRACE_INCLUDE_PATH, and remove the iffy include paths.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Check that KVM_CAP_HYPERV_ENLIGHTENED_VMCS returns correct version range.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>