Pull cpufreq fixes for v3.12 from Viresh Kumar.

* 'cpufreq-fixes' of git://git.linaro.org/people/vireshk/linux:
  cpufreq: imx6q: Fix clock enable balance
  cpufreq: tegra: fix the wrong clock name

For changing the cpu frequency the i.MX6q has to be switched to some
intermediate clock during the PLL reprogramming. The driver tries
to be clever to keep the enable count correct but gets it wrong. If
the cpufreq is increased it calls clk_disable_unprepare twice
on pll2_pfd2_396m. This puts all other devices which get their clock
from pll2_pfd2_396m into a nonworking state.

Fix this by removing the clk enabling/disabling altogether since the
clk core will do this automatically during a reparent.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

The "cpu" and "pclk_p_cclk" was a virtual clock name that was used in
the legacy Tegra clock framework. It was not used after converting to
CCF. Fix it as the correct clock name that we are using.
Tested-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Joseph Lo <josephl@nvidia.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>

Pull DT/core/cpufreq cpu_ofnode updates for v3.12 from Sudeep KarkadaNagesha.

* 'cpu_of_node' of git://linux-arm.org/linux-skn:
  cpufreq: pmac32-cpufreq: remove device tree parsing for cpu nodes
  cpufreq: pmac64-cpufreq: remove device tree parsing for cpu nodes
  cpufreq: maple-cpufreq: remove device tree parsing for cpu nodes
  cpufreq: arm_big_little: remove device tree parsing for cpu nodes
  cpufreq: kirkwood-cpufreq: remove device tree parsing for cpu nodes
  cpufreq: spear-cpufreq: remove device tree parsing for cpu nodes
  cpufreq: highbank-cpufreq: remove device tree parsing for cpu nodes
  cpufreq: cpufreq-cpu0: remove device tree parsing for cpu nodes
  cpufreq: imx6q-cpufreq: remove device tree parsing for cpu nodes
  drivers/bus: arm-cci: avoid parsing DT for cpu device nodes
  ARM: mvebu: remove device tree parsing for cpu nodes
  ARM: topology: remove hwid/MPIDR dependency from cpu_capacity
  of/device: add helper to get cpu device node from logical cpu index
  driver/core: cpu: initialize of_node in cpu's device struture
  ARM: DT/kernel: define ARM specific arch_match_cpu_phys_id
  of: move of_get_cpu_node implementation to DT core library
  powerpc: refactor of_get_cpu_node to support other architectures
  openrisc: remove undefined of_get_cpu_node declaration
  microblaze: remove undefined of_get_cpu_node declaration

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes DT parsing and uses cpu->of_node instead.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.

Cc: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.

Cc: Jason Cooper <jason@lakedaemon.net>
Acked-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.

Cc: Deepak Sikri <sikrid@qti.qualcomm.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.

Cc: Mark Langsdorf <mark.langsdorf@calxeda.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Now that the cpu device registration initialises the of_node(if available)
appropriately for all the cpus, parsing here is redundant.

This patch removes all DT parsing and uses cpu->of_node instead.
Acked-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Since the CPU device nodes can be retrieved using arch_of_get_cpu_node,
we can use it to avoid parsing the cpus node searching the cpu nodes and
mapping to logical index.

This patch removes parsing DT for cpu nodes by using of_get_cpu_node.

Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Currently set_secondary_cpus_clock assume the CPU logical ordering
and the MPDIR in DT are same, which is incorrect.

Since the CPU device nodes can be retrieved in the logical ordering
using the DT helper, we can remove the devices tree parsing.

This patch removes DT parsing by making use of of_get_cpu_node.

Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Jason Cooper <jason@lakedaemon.net>
Acked-by: Gregory Clement <gregory.clement@free-electrons.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Currently the topology code computes cpu capacity and stores it in
the list along with hwid(which is MPIDR) as it parses the CPU nodes
in the device tree. This is required as it needs to be mapped to the
logical CPU later.

Since the CPU device nodes can be retrieved in the logical ordering
using DT/OF helpers, its possible to store cpu_capacity also in logical
ordering and avoid storing hwid for each entry.

This patch removes hwid by making use of of_get_cpu_node.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Multiple drivers need to get the cpu device node from the cpu logical
index and then access the of_node.

This patch adds helper function to fetch the device node directly.
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

CPUs are also registered as devices but the of_node in these cpu
devices are not initialized. Currently different drivers requiring
to access cpu device node are parsing the nodes themselves and
initialising the of_node in cpu device.

The of_node in all the cpu devices needs to be initialized properly
and at one place. The best place to update this is CPU subsystem
driver when registering the cpu devices.

The OF/DT core library now provides of_get_cpu_node to retrieve a cpu
device node for a given logical index by abstracting the architecture
specific details.

This patch uses of_get_cpu_node to assign of_node when registering the
cpu devices.
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

OF/DT core library now provides architecture specific hook to match the
logical cpu index with the corresponding physical identifier. Most of the
cpu DT node parsing and initialisation is contained in devtree.c. So it's
better to define ARM specific arch_match_cpu_phys_id there.

This mainly helps to avoid replication of the code doing CPU node parsing
and physical(MPIDR) to logical mapping.

Cc: Russell King <linux@arm.linux.org.uk>
Cc: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

This patch moves the generalized implementation of of_get_cpu_node from
PowerPC to DT core library, thereby adding support for retrieving cpu
node for a given logical cpu index on any architecture.

The CPU subsystem can now use this function to assign of_node in the
cpu device while registering CPUs.

It is recommended to use these helper function only in pre-SMP/early
initialisation stages to retrieve CPU device node pointers in logical
ordering. Once the cpu devices are registered, it can be retrieved easily
from cpu device of_node which avoids unnecessary parsing and matching.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: Rob Herring <rob.herring@calxeda.com>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

Currently different drivers requiring to access cpu device node are
parsing the device tree themselves. Since the ordering in the DT need
not match the logical cpu ordering, the parsing logic needs to consider
that. However, this has resulted in lots of code duplication and in some
cases even incorrect logic.

It's better to consolidate them by adding support for getting cpu
device node for a given logical cpu index in DT core library. However
logical to physical index mapping can be architecture specific.

PowerPC has it's own implementation to get the cpu node for a given
logical index.

This patch refactors the current implementation of of_get_cpu_node.
This in preparation to move the implementation to DT core library.
It separates out the logical to physical mapping so that a default
matching of the physical id to the logical cpu index can be added
when moved to common code. Architecture specific code can override it.

Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Grant Likely <grant.likely@linaro.org>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

This patch removes the declaration of the function 'of_get_cpu_node'
which is not defined for openrisc. This is in preparation to move
it's definition from PPC to DT common code.

Again it could be there as it was originally copied from powerpc.
Acked-by: Jonas Bonn <jonas@southpole.se>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

This patch removes the declaration of the function 'of_get_cpu_node'
which is not defined for microblaze. This is in preparation to move
it's definition from PPC to DT common code.

Michal Simek says: "it was just there because Microblaze
was based on powerpc code"
Acked-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Sudeep KarkadaNagesha <sudeep.karkadanagesha@arm.com>

This patch tries to fix lockdep complaint attached below.

It seems that we should always read acquire the cpufreq_rwsem,
whether CONFIG_SMP is enabled or not.  And CONFIG_HOTPLUG_CPU
depends on CONFIG_SMP, so it seems we don't need CONFIG_SMP for the
code enabled by CONFIG_HOTPLUG_CPU.

[    0.504191] =====================================
[    0.504627] [ BUG: bad unlock balance detected! ]
[    0.504627] 3.11.0-rc6-next-20130819 #1 Not tainted
[    0.504627] -------------------------------------
[    0.504627] swapper/1 is trying to release lock (cpufreq_rwsem) at:
[    0.504627] [<ffffffff813d927a>] cpufreq_add_dev+0x13a/0x3e0
[    0.504627] but there are no more locks to release!
[    0.504627]
[    0.504627] other info that might help us debug this:
[    0.504627] 1 lock held by swapper/1:
[    0.504627]  #0:  (subsys mutex#4){+.+.+.}, at: [<ffffffff8134a7bf>] subsys_interface_register+0x4f/0xe0
[    0.504627]
[    0.504627] stack backtrace:
[    0.504627] CPU: 0 PID: 1 Comm: swapper Not tainted 3.11.0-rc6-next-20130819 #1
[    0.504627] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2007
[    0.504627]  ffffffff813d927a ffff88007f847c98 ffffffff814c062b ffff88007f847cc8
[    0.504627]  ffffffff81098bce ffff88007f847cf8 ffffffff81aadc30 ffffffff813d927a
[    0.504627]  00000000ffffffff ffff88007f847d68 ffffffff8109d0be 0000000000000006
[    0.504627] Call Trace:
[    0.504627]  [<ffffffff813d927a>] ? cpufreq_add_dev+0x13a/0x3e0
[    0.504627]  [<ffffffff814c062b>] dump_stack+0x19/0x1b
[    0.504627]  [<ffffffff81098bce>] print_unlock_imbalance_bug+0xfe/0x110
[    0.504627]  [<ffffffff813d927a>] ? cpufreq_add_dev+0x13a/0x3e0
[    0.504627]  [<ffffffff8109d0be>] lock_release_non_nested+0x1ee/0x310
[    0.504627]  [<ffffffff81099d0e>] ? mark_held_locks+0xae/0x120
[    0.504627]  [<ffffffff811510cb>] ? kfree+0xcb/0x1d0
[    0.504627]  [<ffffffff813d77ea>] ? cpufreq_policy_free+0x4a/0x60
[    0.504627]  [<ffffffff813d927a>] ? cpufreq_add_dev+0x13a/0x3e0
[    0.504627]  [<ffffffff8109d2a4>] lock_release+0xc4/0x250
[    0.504627]  [<ffffffff8106c9f3>] up_read+0x23/0x40
[    0.504627]  [<ffffffff813d927a>] cpufreq_add_dev+0x13a/0x3e0
[    0.504627]  [<ffffffff8134a809>] subsys_interface_register+0x99/0xe0
[    0.504627]  [<ffffffff81b19f3b>] ? cpufreq_gov_dbs_init+0x12/0x12
[    0.504627]  [<ffffffff813d7f0d>] cpufreq_register_driver+0x9d/0x1d0
[    0.504627]  [<ffffffff81b19f3b>] ? cpufreq_gov_dbs_init+0x12/0x12
[    0.504627]  [<ffffffff81b1a039>] acpi_cpufreq_init+0xfe/0x1f8
[    0.504627]  [<ffffffff810002ba>] do_one_initcall+0xda/0x180
[    0.504627]  [<ffffffff81ae301e>] kernel_init_freeable+0x12c/0x1bb
[    0.504627]  [<ffffffff81ae2841>] ? do_early_param+0x8c/0x8c
[    0.504627]  [<ffffffff814b4dd0>] ? rest_init+0x140/0x140
[    0.504627]  [<ffffffff814b4dde>] kernel_init+0xe/0xf0
[    0.504627]  [<ffffffff814d029a>] ret_from_fork+0x7a/0xb0
[    0.504627]  [<ffffffff814b4dd0>] ? rest_init+0x140/0x140
Signed-off-by: Li Zhong <zhong@linux.vnet.ibm.com>
Acked-and-tested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

To iterate over all policies we currently iterate over all online
CPUs and then get the policy for each of them which is suboptimal.
Use the newly created cpufreq_policy_list for this purpose instead.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq_policy_cpu per-cpu variables are used for storing the ID of
the CPU that manages the given CPU's policy.  However, we also store
a policy pointer for each cpu in cpufreq_cpu_data, so the
cpufreq_policy_cpu information is simply redundant.

It is better to use cpufreq_cpu_data to retrieve a policy and get
policy->cpu from there, so make that happen everywhere and drop the
cpufreq_policy_cpu per-cpu variables which aren't necessary any more.

[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

We don't need to check if event is CPUFREQ_GOV_POLICY_INIT and put
governor module as we are sure event can only be START/STOP here.

Remove the useless check.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

cpufreq_policy_list is a list of active policies.  We do remove
policies from this list when all CPUs belonging to that policy are
removed.  But during system suspend we don't really free a policy
struct as it will be used again during resume, so we didn't remove
it from cpufreq_policy_list as well..

However, this is incorrect.  We are saying this policy isn't valid
anymore and must not be referenced (though we haven't freed it), but
it can still be used by code that iterates over cpufreq_policy_list.

Remove policy from this list during system suspend as well.
Of course, we must add it back whenever the first CPU belonging to
that policy shows up.

[rjw: Changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Align closing brace '}' of an if block.

[rjw: Subject and changelog]
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Pull cgroup fix from Tejun Heo:
 "This contains one patch to fix the return value of cpuset's cgroups
  interface function, which used to always return -ENODEV for the writes
  on the 'memory_pressure_enabled' file"

* 'for-3.11-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cpuset: fix the return value of cpuset_write_u64()

Revert commit eb608521 (cpufreq: Use cpufreq_policy_list for iterating
over policies), because it breaks system suspend/resume on multiple
machines.

It either causes resume to block indefinitely or causes the BUG_ON()
in lock_policy_rwsem_##mode() to trigger on sysfs accesses to cpufreq
attributes.

Conflicts:
	drivers/cpufreq/cpufreq.c

Pull jbd2 bug fixes from Ted Ts'o:
 "Two jbd2 bug fixes, one of which is a regression fix"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  jbd2: Fix oops in jbd2_journal_file_inode()
  jbd2: Fix use after free after error in jbd2_journal_dirty_metadata()

Fix this build error:

  In file included from fs/exec.c:61:0:
  arch/s390/include/asm/tlb.h:35:23: error: expected identifier or '(' before 'unsigned'
  arch/s390/include/asm/tlb.h:36:1: warning: no semicolon at end of struct or union [enabled by default]
  arch/s390/include/asm/tlb.h: In function 'tlb_gather_mmu':
  arch/s390/include/asm/tlb.h:57:5: error: 'struct mmu_gather' has no member named 'end'

Broken due to commit 2b047252 ("Fix TLB gather virtual address range
invalidation corner cases").

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ Oh well. We had build testing for ppc amd um, but no s390  - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

I have taken a different job.  I am removing myself as maintainer of
GRU.  Dimitri will continue to maintain the SGI GRU driver, changing the
XP/XPC/XPNET maintainer to Cliff Whickman, but leaving behind my
personal email address to answer any questions about the design or
operation of the XP family of drivers.
Signed-off-by: Robin Holt <holt@sgi.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Commit 0713ed0c added
jbd2_journal_file_inode() call into ext4_block_zero_page_range().
However that function gets called from truncate path and thus inode
needn't have jinode attached - that happens in ext4_file_open() but
the file needn't be ever open since mount. Calling
jbd2_journal_file_inode() without jinode attached results in the oops.

We fix the problem by attaching jinode to inode also in ext4_truncate()
and ext4_punch_hole() when we are going to zero out partial blocks.
Reported-by: majianpeng <majianpeng@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: "Theodore Ts'o" <tytso@mit.edu>

Pull ARM fixes from Russell King:
 "The usual collection of random fixes.  Also some further fixes to the
  last set of security fixes, and some more from Will (which you may
  already have in a slightly different form)"

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7807/1: kexec: validate CPU hotplug support
  ARM: 7812/1: rwlocks: retry trylock operation if strex fails on free lock
  ARM: 7811/1: locks: use early clobber in arch_spin_trylock
  ARM: 7810/1: perf: Fix array out of bounds access in armpmu_map_hw_event()
  ARM: 7809/1: perf: fix event validation for software group leaders
  ARM: Fix FIQ code on VIVT CPUs
  ARM: Fix !kuser helpers case
  ARM: Fix the world famous typo with is_gate_vma()

Pull m68k fixes from Geert Uytterhoeven:
 "These are two critical fixes, needed by distro kernels, and thus also
  destined for stable:

   - The do_div() commit fixes a crash in mounting btrfs volumes, which
     was a regression from 3.2,

   - The ARAnyM fix allows to have NatFeat drivers as loadable modules,
     which is needed for initrds"

* 'for-3.11' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Truncate base in do_div()
  m68k/atari: ARAnyM - Fix NatFeat module support

Pull clock controller fixes from Michael Turquette:
 "Two small fixes for the Zynq clock controller introduced in 3.11-rc1
  and another Exynos clock patch which fixes a regression that prevents
  the video pipeline from functioning on that platform"

* tag 'clk-fixes-for-linus' of git://git.linaro.org/people/mturquette/linux:
  clk: exynos4: Add CLK_GET_RATE_NOCACHE flag for the Exynos4x12 ISP clocks
  clk/zynq/clkc: Add CLK_SET_RATE_PARENT flag to ethernet muxes
  clk/zynq/clkc: Add dedicated spinlock for the SWDT