Skip to content

L
linux
Switch branch/tag
  1. 01 Nov, 2011 9 commits
    • Minchan Kim's avatar
      mm: zone_reclaim: make isolate_lru_page() filter-aware · f80c0673
      Minchan Kim authored 
      In __zone_reclaim case, we don't want to shrink mapped page.  Nonetheless,
we have isolated mapped page and re-add it into LRU's head.  It's
unnecessary CPU overhead and makes LRU churning.

Of course, when we isolate the page, the page might be mapped but when we
try to migrate the page, the page would be not mapped.  So it could be
migrated.  But race is rare and although it happens, it's no big deal.
Signed-off-by: default avatarMinchan Kim <minchan.kim@gmail.com>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Reviewed-by: default avatarMichal Hocko <mhocko@suse.cz>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f80c0673
    • Minchan Kim's avatar
      mm: compaction: make isolate_lru_page() filter-aware · 39deaf85
      Minchan Kim authored 
      In async mode, compaction doesn't migrate dirty or writeback pages.  So,
it's meaningless to pick the page and re-add it to lru list.

Of course, when we isolate the page in compaction, the page might be dirty
or writeback but when we try to migrate the page, the page would be not
dirty, writeback.  So it could be migrated.  But it's very unlikely as
isolate and migration cycle is much faster than writeout.

So, this patch helps cpu overhead and prevent unnecessary LRU churning.
Signed-off-by: default avatarMinchan Kim <minchan.kim@gmail.com>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: default avatarMel Gorman <mgorman@suse.de>
Acked-by: default avatarRik van Riel <riel@redhat.com>
Reviewed-by: default avatarMichal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      39deaf85
    • Minchan Kim's avatar
      mm: change isolate mode from #define to bitwise type · 4356f21d
      Minchan Kim authored 
      Change ISOLATE_XXX macro with bitwise isolate_mode_t type.  Normally,
macro isn't recommended as it's type-unsafe and making debugging harder as
symbol cannot be passed throught to the debugger.

Quote from Johannes
" Hmm, it would probably be cleaner to fully convert the isolation mode
into independent flags.  INACTIVE, ACTIVE, BOTH is currently a
tri-state among flags, which is a bit ugly."

This patch moves isolate mode from swap.h to mmzone.h by memcontrol.h
Signed-off-by: default avatarMinchan Kim <minchan.kim@gmail.com>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Mel Gorman <mgorman@suse.de>
Cc: Rik van Riel <riel@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      4356f21d
    • Minchan Kim's avatar
      mm: compaction: trivial clean up in acct_isolated() · b9e84ac1
      Minchan Kim authored 
      acct_isolated of compaction uses page_lru_base_type which returns only
base type of LRU list so it never returns LRU_ACTIVE_ANON or
LRU_ACTIVE_FILE.  In addtion, cc->nr_[anon|file] is used in only
acct_isolated so it doesn't have fields in conpact_control.

This patch removes fields from compact_control and makes clear function of
acct_issolated which counts the number of anon|file pages isolated.
Signed-off-by: default avatarMinchan Kim <minchan.kim@gmail.com>
Acked-by: default avatarJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: default avatarKAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Reviewed-by: default avatarKOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Acked-by: default avatarMel Gorman <mgorman@suse.de>
Acked-by: default avatarRik van Riel <riel@redhat.com>
Reviewed-by: default avatarMichal Hocko <mhocko@suse.cz>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      b9e84ac1
    • Christopher Yeoh's avatar
      Cross Memory Attach · fcf63409
      Christopher Yeoh authored 
      The basic idea behind cross memory attach is to allow MPI programs doing
intra-node communication to do a single copy of the message rather than a
double copy of the message via shared memory.

The following patch attempts to achieve this by allowing a destination
process, given an address and size from a source process, to copy memory
directly from the source process into its own address space via a system
call.  There is also a symmetrical ability to copy from the current
process's address space into a destination process's address space.

- Use of /proc/pid/mem has been considered, but there are issues with
  using it:
  - Does not allow for specifying iovecs for both src and dest, assuming
    preadv or pwritev was implemented either the area read from or
  written to would need to be contiguous.
  - Currently mem_read allows only processes who are currently
  ptrace'ing the target and are still able to ptrace the target to read
  from the target. This check could possibly be moved to the open call,
  but its not clear exactly what race this restriction is stopping
  (reason  appears to have been lost)
  - Having to send the fd of /proc/self/mem via SCM_RIGHTS on unix
  domain socket is a bit ugly from a userspace point of view,
  especially when you may have hundreds if not (eventually) thousands
  of processes  that all need to do this with each other
  - Doesn't allow for some future use of the interface we would like to
  consider adding in the future (see below)
  - Interestingly reading from /proc/pid/mem currently actually
  involves two copies! (But this could be fixed pretty easily)

As mentioned previously use of vmsplice instead was considered, but has
problems.  Since you need the reader and writer working co-operatively if
the pipe is not drained then you block.  Which requires some wrapping to
do non blocking on the send side or polling on the receive.  In all to all
communication it requires ordering otherwise you can deadlock.  And in the
example of many MPI tasks writing to one MPI task vmsplice serialises the
copying.

There are some cases of MPI collectives where even a single copy interface
does not get us the performance gain we could.  For example in an
MPI_Reduce rather than copy the data from the source we would like to
instead use it directly in a mathops (say the reduce is doing a sum) as
this would save us doing a copy.  We don't need to keep a copy of the data
from the source.  I haven't implemented this, but I think this interface
could in the future do all this through the use of the flags - eg could
specify the math operation and type and the kernel rather than just
copying the data would apply the specified operation between the source
and destination and store it in the destination.

Although we don't have a "second user" of the interface (though I've had
some nibbles from people who may be interested in using it for intra
process messaging which is not MPI).  This interface is something which
hardware vendors are already doing for their custom drivers to implement
fast local communication.  And so in addition to this being useful for
OpenMPI it would mean the driver maintainers don't have to fix things up
when the mm changes.

There was some discussion about how much faster a true zero copy would
go. Here's a link back to the email with some testing I did on that:

http://marc.info/?l=linux-mm&m=130105930902915&w=2

There is a basic man page for the proposed interface here:

http://ozlabs.org/~cyeoh/cma/process_vm_readv.txt

This has been implemented for x86 and powerpc, other architecture should
mainly (I think) just need to add syscall numbers for the process_vm_readv
and process_vm_writev. There are 32 bit compatibility versions for
64-bit kernels.

For arch maintainers there are some simple tests to be able to quickly
verify that the syscalls are working correctly here:

http://ozlabs.org/~cyeoh/cma/cma-test-20110718.tgzSigned-off-by: default avatarChris Yeoh <yeohc@au1.ibm.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: David Howells <dhowells@redhat.com>
Cc: James Morris <jmorris@namei.org>
Cc: <linux-man@vger.kernel.org>
Cc: <linux-arch@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fcf63409
    • Wanlong Gao's avatar
      ipc/mqueue.c: fix wrong use of schedule_hrtimeout_range_clock() · 32ea845d
      Wanlong Gao authored 
      Fix the wrong use of schedule_hrtimeout_range_clock() in wq_sleep(),
although it is harmless for the syscall mq_timed* now.  It was introduced
by 9ca7d8e6 ("mqueue: Convert message queue timeout to use hrtimers").
Signed-off-by: default avatarWanlong Gao <gaowanlong@cn.fujitsu.com>
Cc: Carsten Emde <C.Emde@osadl.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Manfred Spraul <manfred@colorfullife.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      32ea845d
    • Andrew Morton's avatar
      /proc/self/numa_maps: restore "huge" tag for hugetlb vmas · fc360bd9
      Andrew Morton authored 
      The display of the "huge" tag was accidentally removed in 29ea2f69 ("mm:
use walk_page_range() instead of custom page table walking code").
Reported-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Tested-by: default avatarStephen Hemminger <shemminger@vyatta.com>
Reviewed-by: default avatarStephen Wilson <wilsons@start.ca>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Hugh Dickins <hughd@google.com>
Acked-by: default avatarDavid Rientjes <rientjes@google.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Alexey Dobriyan <adobriyan@gmail.com>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: <stable@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      fc360bd9
    • Andrew Morton's avatar
      include/linux/dmar.h: forward-declare struct acpi_dmar_header · 6eea69dd
      Andrew Morton authored 
      x86_64 allnoconfig:

In file included from arch/x86/kernel/pci-dma.c:3:
include/linux/dmar.h:248: warning: 'struct acpi_dmar_header' declared inside parameter list
include/linux/dmar.h:248: warning: its scope is only this definition or declaration, which is probably not what you want

Cc: Suresh Siddha <suresh.b.siddha@intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      6eea69dd
    • Clemens Ladisch's avatar
      dma-mapping: fix sync_single_range_* DMA debugging · 07a72309
      Clemens Ladisch authored 
      Commit 5fd75a78 (dma-mapping: remove unnecessary sync_single_range_*
in dma_map_ops) unified not only the dma_map_ops but also the
corresponding debug_dma_sync_* calls.  This led to spurious WARN()ings
like the following because the DMA debug code was no longer able to detect
the DMA buffer base address without the separate offset parameter:

WARNING: at lib/dma-debug.c:911 check_sync+0xce/0x446()
firewire_ohci 0000:04:00.0: DMA-API: device driver tries to sync DMA memory it has not allocated [device address=0x00000000cedaa400] [size=1024 bytes]
Call Trace: ...
 [<ffffffff811326a5>] check_sync+0xce/0x446
 [<ffffffff81132ad9>] debug_dma_sync_single_for_device+0x39/0x3b
 [<ffffffffa01d6e6a>] ohci_queue_iso+0x4f3/0x77d [firewire_ohci]
 ...

To fix this, unshare the sync_single_* and sync_single_range_*
implementations so that we are able to call the correct debug_dma_sync_*
functions.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      07a72309
  3. 31 Oct, 2011 5 commits
  5. 30 Oct, 2011 26 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7