The commit 52c4dfce ("Staging: vc04_services: Cleanup in
ctrl_set_bitrate()") changed the return behavior of ctrl_set_bitrate().
We cannot do this because of a bug in the firmware, which breaks probing
of bcm2835-camera:

    bcm2835-v4l2: mmal_init: failed to set all camera controls: -3
    Cleanup: Destroy video encoder
    Cleanup: Destroy image encoder
    Cleanup: Destroy video render
    Cleanup: Destroy camera
    bcm2835-v4l2: bcm2835_mmal_probe: mmal init failed: -3
    bcm2835-camera: probe of bcm2835-camera failed with error -3

So restore the old behavior, add an explaining comment and a debug message
to verify that the bug has been fixed in firmware.

Fixes: 52c4dfce ("Staging: vc04_services: Cleanup in ctrl_set_bitrate()")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Cc: stable <stable@vger.kernel.org>
Acked-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function log_csv_error.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Reviewed-by: Bryan O'Donoghue <pure.logic@nexus-software.ie>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt handler `dt282x_interrupt()` causes a null pointer
dereference for those supported boards that have no analog output
support.  For these boards, `dev->write_subdev` will be `NULL` and
therefore the `s_ao` subdevice pointer variable will be `NULL`.  In that
case, the following call near the end of the interrupt handler results
in a null pointer dereference:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if `s_ao` is valid.

(There are other uses of `s_ao` by the interrupt handler that may or may
not be reached depending on values of hardware registers.  Trust that
they are reliable for now.)

Note:
commit 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()")
propagates an earlier error from
commit f21c74fa ("staging: comedi: dt282x: use cfc_handle_events()").

Fixes: 4f6f009b ("staging: comedi: dt282x: use comedi_handle_events()")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The interrupt handler `pci230_interrupt()` causes a null pointer
dereference for a PCI260 card.  There is no analog output subdevice for
a PCI260.  The `dev->write_subdev` subdevice pointer and therefore the
`s_ao` subdevice pointer variable will be `NULL` for a PCI260.  The
following call near the end of the interrupt handler results in the null
pointer dereference for a PCI260:

	comedi_handle_events(dev, s_ao);

Fix it by only calling the above function if `s_ao` is valid.

Note that the other uses of `s_ao` in the calls
`pci230_handle_ao_nofifo(dev, s_ao);` and `pci230_handle_ao_fifo(dev,
s_ao);` will never be reached for a PCI260, so they are safe.

Fixes: 39064f23 ("staging: comedi: amplc_pci230: use comedi_handle_events()")
Cc: <stable@vger.kernel.org> # v3.19+
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Instead of filling in the struct v4l2_capability device_caps
field, fill in the struct video_device device_caps field.

That way the V4L2 core knows what the capabilities of the
video device are.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Resolve checkpatch warning:
Prefer kzalloc(sizeof(*ptr)...) over kzalloc(sizeof(struct ..)
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Currently, we will check if inode layout is compression or inline if
the inode is special in fill_inode(). Also set ->i_mapping->a_ops for
it. That is pointless since the both modes won't be set for special
inode when creating EROFS filesystem image. So, let's avoid it.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

We should consider the error returned by fill_inline_data() when filling
last page in fill_inode(). If not getting inode will be successful even
though last page is bad. That is illogical. Also change -EAGAIN to 0 in
fill_inline_data() to stand for successful filling.
Signed-off-by: Yue Hu <huyue2@yulong.com>
Reviewed-by: Gao Xiang <gaoxiang25@huawei.com>
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

An earlier patch I sent reduced the stack usage enough to get
below the warning limit, and I could show this was safe, but with
GCC_PLUGIN_STRUCTLEAK_BYREF_ALL, it gets worse again because large stack
variables in the same function no longer overlap:

drivers/staging/rtl8712/rtl871x_ioctl_linux.c: In function 'translate_scan.isra.2':
drivers/staging/rtl8712/rtl871x_ioctl_linux.c:322:1: error: the frame size of 1200 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]

Split out the largest two blocks in the affected function into two
separate functions and mark those noinline_for_stack.

Fixes: 8c5af16f ("staging: rtl8712: reduce stack usage")
Fixes: 81a56f6d ("gcc-plugins: structleak: Generalize to all variable types")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values of function r8712_setrfreg_cmd from _SUCCESS/_FAIL
to 0/-ENOMEM respectively. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_setassocsta_cmd as it is only called by
mp_start_joinbss, which was removed in the previous patch.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function mp_start_joinbss.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_find_network as all it does is call
_r8712_find_network.
Rename _r8712_find_network to r8712_find_network for compatibility with
call sites.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function r8712_setrttbl_cmd.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_free_evt_priv as all it does is call
_free_evt_priv.
Rename _free_evt_priv to r8712_free_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_free_evt_priv from static to non-static to
match old definition.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_free_cmd_priv as all it does is call
_free_cmd_priv.
Change type of new r8712_free_cmd_priv from static to non-static to
match definition of original r8712_free_cmd_priv.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values of the function r8712_init_evt_priv from
_SUCCESS/_FAIL to 0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function r8712_init_evt_priv as all it does is call
_init_evt_priv.
Rename _init_evt_priv to r8712_init_evt_priv to maintain compatibility
with call sites.
Change type of new r8712_init_evt_priv from static to non-static as
original r8712_init_evt_priv was non-static.
Change return type of new r8712_init_evt_priv to int as original had
return type u32 but new (formerly _init_evt_priv) had return type sint.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change return values in r8712_init_cmd_priv from _SUCCESS/_FAIL to
0/-ENOMEM. Modify call site accordingly.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function block_resume as it was only called by
vchiq_arm_force_suspend, which was removed in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove function output_timeout_error as it was only called by
vchiq_arm_force_suspend, which was deleted in a previous patch.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_send_remote_release.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_use_service_no_resume.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_resume_internal.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_pause_internal.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_arm_force_suspend.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiq_arm_allow_resume.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Remove unused function vchiu_queue_is_full.
Issue found with Coccinelle.
Signed-off-by: Nishka Dasgupta <nishkadg.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch errors:
- spaces required around that '=' (ctx:VxV)
- space required before the open parenthesis '('
- spaces preferred around that '-' (ctx:VxV)
- space required before the open brace '{'
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch "CHECK: spaces preferred around that '+' (ctx:VxV)".
Signed-off-by: Simon Sandström <simon@nikanor.nu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function is_ap_in_wep() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function get_bsstype() is not used in the driver code, so remove it.
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtw_init_default_value() func always returns a value (u8)_SUCCESS.
Modified return type to void to resolve coccicheck warnings
of unneeded variable.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Changed return type of function rtw_suspend_wow() to void.
The function always return _SUCCESS and the value is never
checked in the calling function.

Resolves coccicheck Unneeded variable "ret" warning.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Coccicheck issues Unneeded variable "ret" warning.
The return value of function rtw_suspend_normal() is set to _SUCCESS.
The return value is never never checked by the calling function.
Modified return type to void to remove the coccicheck warning..
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function rtw_reset_drv_sw() return value is set to _SUCCESS.
The return value is never checked when the function is called.
Modified the return value to void to remove "Unneeded Variable warning
of coccicheck.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The function static uint loadparam(struct adapter *padapter, _nic_hdl
pnetdev) return type is modified to void.
The initial return value was always returning _SUCCESS and the return value
is never checked when the function is called.
This resolves coccicheck warnings of unneeded variables.
Signed-off-by: Shobhit Kukreti <shobhitkukreti@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Function hal_init_macaddr() just calls rtw_hal_set_hwreg().
Use rtw_hal_set_hwreg() directly and remove hal_init_macaddr().
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Cleanup checkpatch issues in usb_halinit.c.
CHECK: Lines should not end with a '('
Signed-off-by: Michael Straube <straube.linux@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Decompressor needs to know whether it's a partial
or full decompression since only full decompression
can be decompressed in-place.

On kirin980 platform, sequential read is finally
increased to 812MiB/s after decompression inplace
is enabled.
Reviewed-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Gao Xiang <gaoxiang25@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>