The RINTC subtype structure in MADT also has information about other
interrupt controllers. Save this information and provide interfaces to
retrieve them when required by corresponding drivers.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20240812005929.113499-14-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

RISC-V interrupt controllers for wired interrupts are platform devices
and hence their driver will be probed late. Also, APLIC which is one
such interrupt controller can not be probed early since it needs MSI
services. This needs a probing order between the interrupt controller
driver and the device drivers.

_DEP is typically used to indicate such dependencies. However, the
dependency may be already available like GSI mapping. Hence, instead of
an explicit _DEP, architecture can find the implicit dependencies and
add to the dependency list.

For RISC-V, add the dependencies for below use cases.

1) For devices which has IRQ resource, find out the interrupt controller
   using GSI number map and add the dependency.

2) For PCI host bridges:
        a) If _PRT indicate PCI link devices, add dependency on the link
           device.
        b) If _PRT indicates GSI, find out the interrupt controller
           using GSI number map and add the dependency.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-13-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

RISC-V has PLIC and APLIC in MADT as well as namespace devices.
Initialize the list of those structures using MADT and namespace devices
to create mapping between the ACPI handle and the GSI ranges. This will
be used later to add dependencies.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-12-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

On RISC-V platforms, the RINTC structures should be probed before any
other interrupt controller structures and IMSIC before APLIC. This order
is established by using MADT sub table types which are ordered in the
incremental order from the RINTC. So, add the architecture function for
RISC-V to reorder the interrupt controller probing as per the hierarchy
like below.

  ACPI_MADT_TYPE_RINTC = 24,
  ACPI_MADT_TYPE_IMSIC = 25,
  ACPI_MADT_TYPE_APLIC = 26,
  ACPI_MADT_TYPE_PLIC = 27

This means processing all RINTC structures (in the order of appearance
in MADT), followed by IMSIC strucutre and then all APLIC/PLIC
structures.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-11-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Replace the dummy implementation for PCI related functions with actual
implementation. This needs ECAM and MCFG CONFIG options to be enabled
for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-10-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

RISC-V platforms need to use dependencies between PCI host bridge, Link
devices and the interrupt controllers to ensure probe order. The
dependency is like below.

Interrupt controller <-- Link Device <-- PCI Host bridge.

If there is no dependency between Link device and PCI Host Bridge,
then PCI devices may be probed prior to Link devices.  If a PCI
device is probed before its Link device, we won't be able to find
its INTx mapping.

So, add the link device's HID to dependency honor list and clear the
dependency after probe is done so that the dependent devices are
unblocked to probe.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-9-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add the IRQ model for RISC-V INTC so that acpi_set_irq_model can use this
for RISC-V.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-8-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some architectures like RISC-V need to add dependencies without explicit
_DEP. Define a weak function which can be implemented by the architecture.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-7-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

RISC-V PLIC and APLIC will have dependency from devices using GSI. So, add
these devices to the honor list.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-6-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Some architectures like RISC-V will use implicit dependencies like GSI
map to create dependencies between interrupt controller and devices. To
support doing that, the function which creates the dependency, is
refactored bit and made public so that dependency can be added from
outside of scan.c as well.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-5-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Add a new function for RISC-V to do architecture specific initialization
similar to acpi_arm_init(). Some of the ACPI tables are architecture
specific and there is no reason trying to find them on other
architectures. So, add acpi_riscv_init() similar to acpi_arm_init().
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-4-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Unlike OF framework, the irqchip probe using IRQCHIP_ACPI_DECLARE has no
order defined. Depending on the Makefile is not a good idea. So,
usually it is worked around by mandating only root interrupt controller
probed using IRQCHIP_ACPI_DECLARE and other interrupt controllers are
probed via cascade mechanism.

However, this is also not a clean solution because if there are multiple
root controllers (ex: RINTC in RISC-V which is per CPU) which need to be
probed first, then the cascade will happen for every root controller.
So, introduce an architecture specific weak function
arch_sort_irqchip_probe() to order the probing of the interrupt
controllers which can be implemented by different architectures as per
their interrupt controller hierarchy.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-3-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

The functions defined in arm64 for ACPI support are required
for RISC-V also. To avoid duplication, move these functions
to common location.
Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Björn Töpel <bjorn@rivosinc.com>
Link: https://patch.msgid.link/20240812005929.113499-2-sunilvl@ventanamicro.comSigned-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Merge fixes for interrupt chip drivers from tip to avoid a merge
conflict going forward:

"A set of fixes for interrupt chip drivers:

  - Unbreak the PLIC driver for Allwinner D1 systems

    The recent conversion of the PLIC driver to a platform driver broke
    Allwinnder D1 systems due to the deferred probing of platform drivers.

    Due to that the only timer available on D1 systems cannot get an
    interrupt, which causes the system to hang at boot. Other RISCV
    platforms are not affected because they provide the architected SBI
    timer which uses the built in core interrupt controller.

    Cure this by probing PLIC early on D1 systems

  - Cure a regression in ARM/GIC-V3 on 32-bit ARM systems caused by the
    recent addition of a initialization function, which accesses system
    registers before they are enabled. On 64-bit ARM they are enabled
    prior to that by sheer luck.

    Ensure they are enabled.

  - Cure a use before check problem in the MSI library. The existing NULL
    pointer check is too late.

  - Cure a lock order inversion in the ARM/GIC-V4 driver

  - Fix a IS_ERR() vs. NULL pointer check issue in the RISCV APLIC driver

  - Plug a reference count leak in the ARM/GIC-V2 driver"

* tag 'irq-urgent-2024-08-25' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/irq-msi-lib: Check for NULL ops in msi_lib_irq_domain_select()
  irqchip/gic-v3: Init SRE before poking sysregs
  irqchip/gic-v2m: Fix refcount leak in gicv2m_of_init()
  irqchip/riscv-aplic: Fix an IS_ERR() vs NULL bug in probe()
  irqchip/gic-v4: Fix ordering between vmapp and vpe locks
  irqchip/sifive-plic: Probe plic driver early for Allwinner D1 platform

Pull bcachefs fixes from Kent Overstreet:

 - assorted syzbot fixes

 - some upgrade fixes for old (pre 1.0) filesystems

 - fix for moving data off a device that was switched to durability=0
   after data had been written to it.

 - nocow deadlock fix

 - fix for new rebalance_work accounting

* tag 'bcachefs-2024-08-24' of git://evilpiepirate.org/bcachefs: (28 commits)
  bcachefs: Fix rebalance_work accounting
  bcachefs: Fix failure to flush moves before sleeping in copygc
  bcachefs: don't use rht_bucket() in btree_key_cache_scan()
  bcachefs: add missing inode_walker_exit()
  bcachefs: clear path->should_be_locked in bch2_btree_key_cache_drop()
  bcachefs: Fix double assignment in check_dirent_to_subvol()
  bcachefs: Fix refcounting in discard path
  bcachefs: Fix compat issue with old alloc_v4 keys
  bcachefs: Fix warning in bch2_fs_journal_stop()
  fs/super.c: improve get_tree() error message
  bcachefs: Fix missing validation in bch2_sb_journal_v2_validate()
  bcachefs: Fix replay_now_at() assert
  bcachefs: Fix locking in bch2_ioc_setlabel()
  bcachefs: fix failure to relock in btree_node_fill()
  bcachefs: fix failure to relock in bch2_btree_node_mem_alloc()
  bcachefs: unlock_long() before resort in journal replay
  bcachefs: fix missing bch2_err_str()
  bcachefs: fix time_stats_to_text()
  bcachefs: Fix bch2_bucket_gens_init()
  bcachefs: Fix bch2_trigger_alloc assert
  ...

Pull smb server fixes from Steve French:

 - query directory flex array fix

 - fix potential null ptr reference in open

 - fix error message in some open cases

 - two minor cleanups

* tag '6.11-rc5-server-fixes' of git://git.samba.org/ksmbd:
  smb/server: update misguided comment of smb2_allocate_rsp_buf()
  smb/server: remove useless assignment of 'file_present' in smb2_open()
  smb/server: fix potential null-ptr-deref of lease_ctx_info in smb2_open()
  smb/server: fix return value of smb2_open()
  ksmbd: the buffer of smb2 query dir response has at least 1 byte

Pull s390 fixes from Vasily Gorbik:

 - Fix KASLR base offset to account for symbol offsets in the vmlinux
   ELF file, preventing tool breakages like the drgn debugger

 - Fix potential memory corruption of physmem_info during kernel
   physical address randomization

 - Fix potential memory corruption due to overlap between the relocated
   lowcore and identity mapping by correctly reserving lowcore memory

 - Fix performance regression and avoid randomizing identity mapping
   base by default

 - Fix unnecessary delay of AP bus binding complete uevent to prevent
   startup lag in KVM guests using AP

* tag 's390-6.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/boot: Fix KASLR base offset off by __START_KERNEL bytes
  s390/boot: Avoid possible physmem_info segment corruption
  s390/ap: Refine AP bus bindings complete processing
  s390/mm: Pin identity mapping base to zero
  s390/mm: Prevent lowcore vs identity mapping overlap

Pull SCSI fixes from James Bottomley:
 "The important core fix is another tweak to our discard discovery
  issues. The off by 512 in logical block count seems bad, but in fact
  the inline was only ever used in debug prints, which is why no-one
  noticed"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: sd: Do not attempt to configure discard unless LBPME is set
  scsi: MAINTAINERS: Add header files to SCSI SUBSYSTEM
  scsi: ufs: qcom: Add UFSHCD_QUIRK_BROKEN_LSDBS_CAP for SM8550 SoC
  scsi: ufs: core: Add a quirk for handling broken LSDBS field in controller capabilities register
  scsi: core: Fix the return value of scsi_logical_block_count()
  scsi: MAINTAINERS: Update HiSilicon SAS controller driver maintainer

rebalance_work was keying off of the presence of rebelance_opts in the
extent - but that was incorrect, we keep those around after rebalance
for indirect extents since the inode's options are not directly
available

Fixes: 20ac515a ("bcachefs: bch_acct_rebalance_work")
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

This fixes an apparent deadlock - rebalance would get stuck trying to
take nocow locks because they weren't being released by copygc.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull cgroup fixes from Tejun Heo:
 "Three patches addressing cpuset corner cases"

* tag 'cgroup-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
  cgroup/cpuset: Eliminate unncessary sched domains rebuilds in hotplug
  cgroup/cpuset: Clear effective_xcpus on cpus_allowed clearing only if cpus.exclusive not set
  cgroup/cpuset: fix panic caused by partcmd_update

Pull workqueue fixes from Tejun Heo:
 "Nothing too interesting. One patch to remove spurious warning and
  others to address static checker warnings"

* tag 'wq-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: Correct declaration of cpu_pwq in struct workqueue_struct
  workqueue: Fix spruious data race in __flush_work()
  workqueue: Remove incorrect "WARN_ON_ONCE(!list_empty(&worker->entry));" from dying worker
  workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask()
  workqueue: doc: Fix function name, remove markers

Pull MIPS fixes from Thomas Bogendoerfer:

 - Set correct timer mode on Loongson64

 - Only request r4k clockevent interrupt on one CPU

* tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed
  MIPS: Loongson64: Set timer mode in cpu-probe

Pull arm64 kvm fixes from Catalin Marinas:

 - Don't drop references on LPIs that weren't visited by the vgic-debug
   iterator

 - Cure lock ordering issue when unregistering vgic redistributors

 - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
   pages

 - Treat SGI registers as UNDEFINED if a VM hasn't been configured for
   GICv3

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
  KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
  KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
  KVM: arm64: vgic-debug: Don't put unmarked LPIs

Pull NFS client fixes from Anna Schumaker:

 - Fix rpcrdma refcounting in xa_alloc

 - Fix rpcrdma usage of XA_FLAGS_ALLOC

 - Fix requesting FATTR4_WORD2_OPEN_ARGUMENTS

 - Fix attribute bitmap decoder to handle a 3rd word

 - Add reschedule points when returning delegations to avoid soft lockups

 - Fix clearing layout segments in layoutreturn

 - Avoid unnecessary rescanning of the per-server delegation list

* tag 'nfs-for-6.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  NFS: Avoid unnecessary rescanning of the per-server delegation list
  NFSv4: Fix clearing of layout segments in layoutreturn
  NFSv4: Add missing rescheduling points in nfs_client_return_marked_delegations
  nfs: fix bitmap decoder to handle a 3rd word
  nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS
  rpcrdma: Trace connection registration and unregistration
  rpcrdma: Use XA_FLAGS_ALLOC instead of XA_FLAGS_ALLOC1
  rpcrdma: Device kref is over-incremented on error from xa_alloc

Pull smb client fixes from Steve French:

 - fix refcount leak (can cause rmmod fail)

 - fix byte range locking problem with cached reads

 - fix for mount failure if reparse point unrecognized

 - minor typo

* tag 'v6.11-rc4-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb/client: fix typo: GlobalMid_Sem -> GlobalMid_Lock
  smb: client: ignore unhandled reparse tags
  smb3: fix problem unloading module due to leaked refcount on shutdown
  smb3: fix broken cached reads when posix locks

Pull input fixes from Dmitry Torokhov:

 - a tweak to uinput interface to reject requests with abnormally large
   number of slots. 100 slots/contacts should be enough for real devices

 - support for FocalTech FT8201 added to the edt-ft5x06 driver

 - tweaks to i8042 to handle more devices that have issue with its
   emulation

 - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook
   840 G2

 - other minor fixes

* tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: himax_hx83112b - fix incorrect size when reading product ID
  Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination
  Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3
  Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table
  Input: uinput - reject requests with unreasonable number of slots
  Input: edt-ft5x06 - add support for FocalTech FT8201
  dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support
  Input: adc-joystick - fix optional value handling
  Input: synaptics - enable SMBus for HP Elitebook 840 G2
  Input: ads7846 - ratelimit the spi_sync error message

Pull drm fixes from Dave Airlie:
 "Weekly fixes. xe and msm are the major groups, with
  amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw
  workaround fixes that were found to be missing, so that is why there
  are a bunch of scattered fixes, and one larger one. But overall size
  doesn't look too out of the ordinary.

  msm:
   - virtual plane fixes:
      - drop yuv on hw where not supported
      - csc vs yuv format fix
      - rotation fix
   - fix fb cleanup on close
   - reset phy before link training
   - fix visual corruption at 4K
   - fix NULL ptr crash on hotplug
   - simplify debug macros
   - sc7180 fix
   - adreno firmware name error path fix

  amdgpu:
   - GFX10 firmware loading fix
   - SDMA 5.2 fix
   - Debugfs parameter validation fix
   - eGPU hotplug fix

  i915:
   - fix HDCP timeouts

  nouveau:
   - fix SG_DEBUG crash

  xe:
   - Fix OA format masks which were breaking build with gcc-5
   - Fix opregion leak (Lucas)
   - Fix OA sysfs entry (Ashutosh)
   - Fix VM dma-resv lock (Brost)
   - Fix tile fini sequence (Brost)
   - Prevent UAF around preempt fence (Auld)
   - Fix DGFX display suspend/resume (Maarten)
   - Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele)
   - Fix devm/drmm issues (Daniele)
   - Fix missing workqueue destroy in xe_gt_pagefault (Stuart)
   - Drop HW fence pointer to HW fence ctx (Brost)
   - Free job before xe_exec_queue_put (Brost)"

* tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits)
  drm/xe: Free job before xe_exec_queue_put
  drm/xe: Drop HW fence pointer to HW fence ctx
  drm/xe: Fix missing workqueue destroy in xe_gt_pagefault
  drm/amdgpu: fix eGPU hotplug regression
  drm/amdgpu: Validate TA binary size
  drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1
  drm/amdgpu: fixing rlc firmware loading failure issue
  drm/xe/uc: Use devm to register cleanup that includes exec_queues
  drm/xe: use devm instead of drmm for managed bo
  drm/xe/xe2hpg: Add Wa_14021821874
  drm/xe: fix WA 14018094691
  drm/xe/xe2: Add Wa_15015404425
  drm/xe/xe2: Make subsequent L2 flush sequential
  drm/xe/xe2lpg: Extend workaround 14021402888
  drm/xe/xe2lpm: Extend Wa_16021639441
  drm/xe/bmg: implement Wa_16023588340
  drm/xe/oa/uapi: Make bit masks unsigned
  drm/xe/display: Make display suspend/resume work on discrete
  drm/xe: prevent UAF around preempt fence
  drm/xe: Fix tile fini sequence
  ...

Pull block fixes from Jens Axboe:

 - NVMe pull request via Keith
     - Remove unused struct field (Nilay)
     - Fix fabrics keep-alive teardown order (Ming)

 - Write zeroes fixes (John)

* tag 'block-6.11-20240823' of git://git.kernel.dk/linux:
  nvme: Remove unused field
  nvme: move stopping keep-alive into nvme_uninit_ctrl()
  block: Drop NULL check in bdev_write_zeroes_sectors()
  block: Read max write zeroes once for __blkdev_issue_write_zeroes()

Pull io_uring fix from Jens Axboe:
 "Just a single fix for provided buffer validation"

* tag 'io_uring-6.11-20240823' of git://git.kernel.dk/linux:
  io_uring/kbuf: sanitize peek buffer setup

Pull ACPI fix from Rafael Wysocki:
 "Fix backlight control on a Dell All In One system where a backlight
  controller board is attached to a UART port and the dell-uart
  backlight driver binds to it, but the backlight is actually controlled
  by other means (Hans de Goede)"

* tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO
  platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type()
  ACPI: video: Add Dell UART backlight controller detection

Pull thermal control fixes from Rafael Wysocki:
 "These fix error handling in the thermal debug code and OF node
  reference leaks in the thermal OF driver.

  Specifics:

   - Use IS_ERR() in checks of debugfs_create_dir() return value instead
     of checking it against NULL in the thermal debug code (Yang Ruibin)

   - Fix three OF node reference leaks in thermal_of (Krzysztof
     Kozlowski)"

* tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  thermal: of: Fix OF node leak in of_thermal_zone_find() error paths
  thermal: of: Fix OF node leak in thermal_of_zone_register()
  thermal: of: Fix OF node leak in thermal_of_trips_init() error path
  thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()

Pull mmc fixes from Ulf Hansson:
 "MMC core:
   - Fix NULL dereference for mmc_test on allocation failure

  MMC host:
   - dw_mmc: Fix support for deferred probe for biu/ciu clocks
   - mtk-sd: Fix CMD8 support when fragile tuning settings"

* tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: mmc_test: Fix NULL dereference on allocation failure
  mmc: dw_mmc: allow biu and ciu clocks to defer
  mmc: mtk-sd: receive cmd8 data when hs400 tuning fail

Pull spi fixes from Mark Brown:
 "A small collection of fixes here, all driver specific and none of them
  too serious. For whatever reason runtime PM seems to have been causing
  a bunch of issues recently"

* tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: pxa2xx: Move PM runtime handling to the glue drivers
  spi: pxa2xx: Do not override dev->platform_data on probe
  spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register
  spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume
  spi: zynqmp-gqspi: Scale timeout by data size

The irq_domain passed to msi_lib_irq_domain_select() may not have
msi_parent_ops set. There is a NULL pointer check for it, but unfortunately
there is a dereference of the parent ops pointer before that.

Move the NULL pointer test before the first use of that pointer.

This was found on a MacchiatoBin (Marvell Armada 8K SoC), which uses the
irq-mvebu-sei driver.

Fixes: 72e257c6 ("irqchip: Provide irq-msi-lib")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240823100733.1900666-1-maxime.chevallier@bootlin.com
Closes: https://lore.kernel.org/all/20240821165034.1af97bad@fedora-3.home/

The GICv3 driver pokes GICv3 system registers in gic_prio_init() before
gic_cpu_sys_reg_init() ensures that GICv3 system registers have been
enabled by writing to ICC_SRE_EL1.SRE.

On arm64 this is benign as has_useable_gicv3_cpuif() runs earlier during
cpufeature detection, and this enables the GICv3 system registers.

On 32-bit arm when booting on an FVP using the boot-wrapper, the accesses
in gic_prio_init() end up being UNDEFINED and crashes the kernel during
boot.

This is a regression introduced by the addition of gic_prio_init().

Fix this by factoring out the SRE initialization into a new function and
calling it early in the three paths where SRE may not have been
initialized:

(1) gic_init_bases(), before the primary CPU pokes GICv3 sysregs in
    gic_prio_init().

(2) gic_starting_cpu(), before secondary CPUs initialize GICv3 sysregs
    in gic_cpu_init().

(3) gic_cpu_pm_notifier(), before CPUs re-initialize GICv3 sysregs in
    gic_cpu_sys_reg_init().

Fixes: d447bf09 ("irqchip/gic-v3: Detect GICD_CTRL.DS and SCR_EL3.FIQ earlier")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org

Pull power sequencing fix from Bartosz Golaszewski:

 - request the wlan-enable GPIO "as-is" to fix an issue with the wifi
   module being already powered up before linux boots

* tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  power: sequencing: request the WLAN enable GPIO as-is

Pull pmdomain fixes from Ulf Hansson:

 - imx: Remove duplicated clocks for scu power domain

 - imx: Wait for SSAR to complete power-on for i.MX93 power domain

* tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
  pmdomain: imx: wait SSAR when i.MX93 power domain on
  pmdomain: imx: scu-pd: Remove duplicated clocks

Merge tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into for-next/fixes

KVM/arm64 fixes for 6.11, round #2

 - Don't drop references on LPIs that weren't visited by the
   vgic-debug iterator

 - Cure lock ordering issue when unregistering vgic redistributors

 - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb
   pages

 - Treat SGI registers as UNDEFINED if a VM hasn't been configured for
   GICv3

* tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm:
  KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3
  KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault
  KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors
  KVM: arm64: vgic-debug: Don't put unmarked LPIs
  KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface
  KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list
  KVM: arm64: Tidying up PAuth code in KVM
  KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI
  KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain
  docs: KVM: Fix register ID of SPSR_FIQ
  KVM: arm64: vgic: fix unexpected unlock sparse warnings
  KVM: arm64: fix kdoc warnings in W=1 builds
  KVM: arm64: fix override-init warnings in W=1 builds
  KVM: arm64: free kvm->arch.nested_mmus with kvfree()