- 27 Jun, 2013 3 commits
-
-
Lai Jiangshan authored
commit 72b5322f upstream. The @cn is stay in @clk_notifier_list after it is freed, it cause memory corruption. Example, if @clk is registered(first), unregistered(first), registered(second), unregistered(second). The freed @cn will be used when @clk is registered(second), and the bug will be happened when @clk is unregistered(second): [ 517.040000] clk_notif_dbg clk_notif_dbg.1: clk_notifier_unregister() [ 517.040000] Unable to handle kernel paging request at virtual address 00df3008 [ 517.050000] pgd = ed858000 [ 517.050000] [00df3008] *pgd=00000000 [ 517.060000] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 517.060000] Modules linked in: clk_notif_dbg(O-) [last unloaded: clk_notif_dbg] [ 517.060000] CPU: 1 PID: 499 Comm: modprobe Tainted: G O 3.10.0-rc3-00119-ga93cb29a-dirty #85 [ 517.060000] task: ee1e0180 ti: ee3e6000 task.ti: ee3e6000 [ 517.060000] PC is at srcu_readers_seq_idx+0x48/0x84 [ 517.060000] LR is at srcu_readers_seq_idx+0x60/0x84 [ 517.060000] pc : [<c0052720>] lr : [<c0052738>] psr: 80070013 [ 517.060000] sp : ee3e7d48 ip : 00000000 fp : ee3e7d6c [ 517.060000] r10: 00000000 r9 : ee3e6000 r8 : 00000000 [ 517.060000] r7 : ed84fe4c r6 : c068ec90 r5 : c068e430 r4 : 00000000 [ 517.060000] r3 : 00df3000 r2 : 00000000 r1 : 00000002 r0 : 00000000 [ 517.060000] Flags: Nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 517.060000] Control: 18c5387d Table: 2d85804a DAC: 00000015 [ 517.060000] Process modprobe (pid: 499, stack limit = 0xee3e6238) [ 517.060000] Stack: (0xee3e7d48 to 0xee3e8000) .... [ 517.060000] [<c0052720>] (srcu_readers_seq_idx+0x48/0x84) from [<c0052790>] (try_check_zero+0x34/0xfc) [ 517.060000] [<c0052790>] (try_check_zero+0x34/0xfc) from [<c00528b0>] (srcu_advance_batches+0x58/0x114) [ 517.060000] [<c00528b0>] (srcu_advance_batches+0x58/0x114) from [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) [ 517.060000] [<c0052c30>] (__synchronize_srcu+0x114/0x1ac) from [<c0052d14>] (synchronize_srcu+0x2c/0x34) [ 517.060000] [<c0052d14>] (synchronize_srcu+0x2c/0x34) from [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) [ 517.060000] [<c0053a08>] (srcu_notifier_chain_unregister+0x68/0x74) from [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) [ 517.060000] [<c0375a78>] (clk_notifier_unregister+0x7c/0xc0) from [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) [ 517.060000] [<bf008034>] (clk_notif_dbg_remove+0x34/0x9c [clk_notif_dbg]) from [<c02bb974>] (platform_drv_remove+0x24/0x28) [ 517.060000] [<c02bb974>] (platform_drv_remove+0x24/0x28) from [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) [ 517.060000] [<c02b9bf8>] (__device_release_driver+0x8c/0xd4) from [<c02ba680>] (driver_detach+0x9c/0xc4) [ 517.060000] [<c02ba680>] (driver_detach+0x9c/0xc4) from [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) [ 517.060000] [<c02b99c4>] (bus_remove_driver+0xcc/0xfc) from [<c02bace4>] (driver_unregister+0x54/0x78) [ 517.060000] [<c02bace4>] (driver_unregister+0x54/0x78) from [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) [ 517.060000] [<c02bbb44>] (platform_driver_unregister+0x1c/0x20) from [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) [ 517.060000] [<bf0081f8>] (clk_notif_dbg_driver_exit+0x14/0x1c [clk_notif_dbg]) from [<c00835e4>] (SyS_delete_module+0x200/0x28c) [ 517.060000] [<c00835e4>] (SyS_delete_module+0x200/0x28c) from [<c000edc0>] (ret_fast_syscall+0x0/0x48) [ 517.060000] Code: e5973004 e7911102 e0833001 e2881002 (e7933101) Reported-by:
Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Tested-by:
Mike Turquette <mturquette@linaro.org> [mturquette@linaro.org: shortened $SUBJECT] Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Clemens Ladisch authored
commit 342cda29 upstream. When the Android firmware enables the audio interfaces in accessory mode, it always declares in the control interface's baInterfaceNr array that interfaces 0 and 1 belong to the audio function. However, the accessory interface itself, if also enabled, already is at index 0 and shifts the actual audio interface numbers to 1 and 2, which prevents the PCM streaming interface from being seen by the host driver. To get the PCM interface interface to work, detect when the descriptors point to the (for this driver useless) accessory interface, and redirect to the correct one. Reported-by:
Jeremy Rosen <jeremy.rosen@openwide.fr> Tested-by:
Clemens Ladisch <clemens@ladisch.de> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 36691e1b upstream. Just like the previous fix for LogitechHD Webcam c270 in commit 11e7064f, c310 model also requires the same workaround for avoiding the kernel warning. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=59741Signed-off-by:
-
- 20 Jun, 2013 27 commits
-
-
Greg Kroah-Hartman authored
-
Benjamin Herrenschmidt authored
commit 230b3034 upstream. When replaying interrupts (as a result of the interrupt occurring while soft-disabled), in the case of the decrementer, we are exclusively testing for a pending timer target. However we also use decrementer interrupts to trigger the new "irq_work", which in this case would be missed. This change the logic to force a replay in both cases of a timer boundary reached and a decrementer interrupt having actually occurred while disabled. The former test is still useful to catch cases where a CPU having been hard-disabled for a long time completely misses the interrupt due to a decrementer rollover. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Tested-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Michael Ellerman authored
commit 0e37739b upstream. It's possible for us to crash when running with ftrace enabled, eg: Bad kernel stack pointer bffffd12 at c00000000000a454 cpu 0x3: Vector: 300 (Data Access) at [c00000000ffe3d40] pc: c00000000000a454: resume_kernel+0x34/0x60 lr: c00000000000335c: performance_monitor_common+0x15c/0x180 sp: bffffd12 msr: 8000000000001032 dar: bffffd12 dsisr: 42000000 If we look at current's stack (paca->__current->stack) we see it is equal to c0000002ecab0000. Our stack is 16K, and comparing to paca->kstack (c0000002ecab3e30) we can see that we have overflowed our kernel stack. This leads to us writing over our struct thread_info, and in this case we have corrupted thread_info->flags and set _TIF_EMULATE_STACK_STORE. Dumping the stack we see: 3:mon> t c0000002ecab0000 [c0000002ecab0000] c00000000002131c .performance_monitor_exception+0x5c/0x70 [c0000002ecab0080] c00000000000335c performance_monitor_common+0x15c/0x180 --- Exception: f01 (Performance Monitor) at c0000000000fb2ec .trace_hardirqs_off+0x1c/0x30 [c0000002ecab0370] c00000000016fdb0 .trace_graph_entry+0xb0/0x280 (unreliable) [c0000002ecab0410] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab04b0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab0520] c0000000000d6b58 .idle_cpu+0x18/0x90 [c0000002ecab05a0] c00000000000a934 .return_to_handler+0x0/0x34 [c0000002ecab0620] c00000000001e660 .timer_interrupt+0x160/0x300 [c0000002ecab06d0] c0000000000025dc decrementer_common+0x15c/0x180 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 [c0000002ecab09c0] c0000000000fe044 .trace_hardirqs_on+0x14/0x30 (unreliable) [c0000002ecab0fb0] c00000000016fe3c .trace_graph_entry+0x13c/0x280 [c0000002ecab1050] c00000000003d038 .prepare_ftrace_return+0x98/0x130 [c0000002ecab10f0] c00000000000a920 .ftrace_graph_caller+0x14/0x28 [c0000002ecab1160] c0000000000161f0 .__ppc64_runlatch_on+0x10/0x40 [c0000002ecab11d0] c00000000000a934 .return_to_handler+0x0/0x34 --- Exception: 901 (Decrementer) at c0000000000104d4 .arch_local_irq_restore+0x74/0xa0 ... and so on __ppc64_runlatch_on() is called from RUNLATCH_ON in the exception entry path. At that point the irq state is not consistent, ie. interrupts are hard disabled (by the exception entry), but the paca soft-enabled flag may be out of sync. This leads to the local_irq_restore() in trace_graph_entry() actually enabling interrupts, which we do not want. Because we have not yet reprogrammed the decrementer we immediately take another decrementer exception, and recurse. The fix is twofold. Firstly make sure we call DISABLE_INTS before calling RUNLATCH_ON. The badly named DISABLE_INTS actually reconciles the irq state in the paca with the hardware, making it safe again to call local_irq_save/restore(). Although that should be sufficient to fix the bug, we also mark the runlatch routines as notrace. They are called very early in the exception entry and we are asking for trouble tracing them. They are also fairly uninteresting and tracing them just adds unnecessary overhead. [ This regression was introduced by fe1952fc "powerpc: Rework runlatch code" by myself --BenH ] Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
-
Sage Weil authored
commit 92a49fb0 upstream. Different versions of glibc are broken in different ways, but the short of it is that for the time being, frsize should == bsize, and be used as the multiple for the blocks, free, and available fields. This mirrors what is done for NFS. The previous reporting of the page size for frsize meant that newer glibc and df would report a very small value for the fs size. Fixes http://tracker.ceph.com/issues/3793. Signed-off-by:
Sage Weil <sage@inktank.com> Reviewed-by:
Greg Farnum <greg@inktank.com> Signed-off-by:
-
Sage Weil authored
commit e9966076 upstream. The auth code is called from a variety of contexts, include the mon_client (protected by the monc's mutex) and the messenger callbacks (currently protected by nothing). Avoid chaos by protecting all auth state with a mutex. Nothing is blocking, so this should be simple and lightweight. Signed-off-by:
Alex Elder <elder@inktank.com> Signed-off-by:
-
Sage Weil authored
commit 27859f97 upstream. Use wrapper functions that check whether the auth op exists so that callers do not need a bunch of conditional checks. Simplifies the external interface. Signed-off-by:
-
Sage Weil authored
commit 0bed9b5c upstream. Currently the messenger calls out to a get_authorizer con op, which will create a new authorizer if it doesn't yet have one. In the meantime, when we rotate our service keys, the authorizer doesn't get updated. Eventually it will be rejected by the server on a new connection attempt and get invalidated, and we will then rebuild a new authorizer, but this is not ideal. Instead, if we do have an authorizer, call a new update_authorizer op that will verify that the current authorizer is using the latest secret. If it is not, we will build a new one that does. This avoids the transient failure. This fixes one of the sorry sequence of events for bug http://tracker.ceph.com/issues/4282Signed-off-by:
-
Sage Weil authored
commit 4b8e8b5d upstream. We were invalidating the authorizer by removing the ticket handler entirely. This was effective in inducing us to request a new authorizer, but in the meantime it mean that any authorizer we generated would get a new and initialized handler with secret_id=0, which would always be rejected by the server side with a confusing error message: auth: could not find secret_id=0 cephx: verify_authorizer could not get service secret for service osd secret_id=0 Instead, simply clear the validity field. This will still induce the auth code to request a new secret, but will let us continue to use the old ticket in the meantime. The messenger code will probably continue to fail, but the exponential backoff will kick in, and eventually the we will get a new (hopefully more valid) ticket from the mon and be able to continue. Signed-off-by:
-
Sage Weil authored
commit 20e55c4c upstream. We maintain a counter of failed auth attempts to allow us to retry once before failing. However, if the second attempt succeeds, the flag isn't cleared, which makes us think auth failed again later when the connection resets for other reasons (like a socket error). This is one part of the sorry sequence of events in bug http://tracker.ceph.com/issues/4282Signed-off-by:
-
Kees Cook authored
commit c8a22d19 upstream. Fixes a typo in register clearing code. Thanks to PaX Team for fixing this originally, and James Troup for pointing it out. Signed-off-by:
Kees Cook <keescook@chromium.org> Link: http://lkml.kernel.org/r/20130605184718.GA8396@www.outflux.net Cc: PaX Team <pageexec@freemail.hu> Signed-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Naoya Horiguchi authored
commit 30dad309 upstream. When we have a page fault for the address which is backed by a hugepage under migration, the kernel can't wait correctly and do busy looping on hugepage fault until the migration finishes. As a result, users who try to kick hugepage migration (via soft offlining, for example) occasionally experience long delay or soft lockup. This is because pte_offset_map_lock() can't get a correct migration entry or a correct page table lock for hugepage. This patch introduces migration_entry_wait_huge() to solve this. Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Reviewed-by:
Rik van Riel <riel@redhat.com> Reviewed-by:
Wanpeng Li <liwanp@linux.vnet.ibm.com> Reviewed-by:
Michal Hocko <mhocko@suse.cz> Cc: Mel Gorman <mgorman@suse.de> Cc: Andi Kleen <andi@firstfloor.org> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Alex Lyakas authored
md/raid1: consider WRITE as successful only if at least one non-Faulty and non-rebuilding drive completed it. commit 3056e3ae upstream. Without that fix, the following scenario could happen: - RAID1 with drives A and B; drive B was freshly-added and is rebuilding - Drive A fails - WRITE request arrives to the array. It is failed by drive A, so r1_bio is marked as R1BIO_WriteError, but the rebuilding drive B succeeds in writing it, so the same r1_bio is marked as R1BIO_Uptodate. - r1_bio arrives to handle_write_finished, badblocks are disabled, md_error()->error() does nothing because we don't fail the last drive of raid1 - raid_end_bio_io() calls call_bio_endio() - As a result, in call_bio_endio(): if (!test_bit(R1BIO_Uptodate, &r1_bio->state)) clear_bit(BIO_UPTODATE, &bio->bi_flags); this code doesn't clear the BIO_UPTODATE flag, and the whole master WRITE succeeds, back to the upper layer. So we returned success to the upper layer, even though we had written the data onto the rebuilding drive only. But when we want to read the data back, we would not read from the rebuilding drive, so this data is lost. [neilb - applied identical change to raid10 as well] This bug can result in lost data, so it is suitable for any -stable kernel. Signed-off-by:
Alex Lyakas <alex@zadarastorage.com> Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Rafael Aquini authored
commit cbab0e4e upstream. read_swap_cache_async() can race against get_swap_page(), and stumble across a SWAP_HAS_CACHE entry in the swap map whose page wasn't brought into the swapcache yet. This transient swap_map state is expected to be transitory, but the actual placement of discard at scan_swap_map() inserts a wait for I/O completion thus making the thread at read_swap_cache_async() to loop around its -EEXIST case, while the other end at get_swap_page() is scheduled away at scan_swap_map(). This can leave the system deadlocked if the I/O completion happens to be waiting on the CPU waitqueue where read_swap_cache_async() is busy looping and !CONFIG_PREEMPT. This patch introduces a cond_resched() call to make the aforementioned read_swap_cache_async() busy loop condition to bail out when necessary, thus avoiding the subtle race window. Signed-off-by:
Rafael Aquini <aquini@redhat.com> Acked-by:
Johannes Weiner <hannes@cmpxchg.org> Acked-by:
KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by:
Hugh Dickins <hughd@google.com> Cc: Shaohua Li <shli@kernel.org> Signed-off-by:
-
Daniel Vetter authored
commit c3456fb3 upstream. In commit 53d3b4d7 Author: Egbert Eich <eich@suse.de> Date: Tue Jun 4 17:13:21 2013 +0200 drm/i915/sdvo: Use &intel_sdvo->ddc instead of intel_sdvo->i2c for DDC Egbert Eich fixed a long-standing bug where we simply used a non-working i2c controller to read the EDID for SDVO-LVDS panels. Unfortunately some machines seem to not be able to cope with the mode provided in the EDID. Specifically they seem to not be able to cope with a 4x pixel mutliplier instead of a 2x one, which seems to have been worked around by slightly changing the panels native mode in the VBT so that the dotclock is just barely above 50MHz. Since it took forever to notice the breakage it's fairly safe to assume that at least for SDVO-LVDS panels the VBT contains fairly sane data. So just switch around the order and use VBT modes first. v2: Also add EDID modes just in case, and spell Egbert correctly. v3: Elaborate a bit more about what's going on on Chris' machine. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=65524Reported-and-tested-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Egbert Eich <eich@suse.de> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Stephen M. Cameron authored
commit 03f47e88 upstream. If a new logical drive is added and the CCISS_REGNEWD ioctl is invoked (as is normal with the Array Configuration Utility) the process will hang as below. It attempts to acquire the same mutex twice, once in do_ioctl() and once in cciss_unlocked_open(). The BKL was recursive, the mutex isn't. Linux version 3.10.0-rc2 (scameron@localhost.localdomain) (gcc version 4.4.7 20120313 (Red Hat 4.4.7-3) (GCC) ) #1 SMP Fri May 24 14:32:12 CDT 2013 [...] acu D 0000000000000001 0 3246 3191 0x00000080 Call Trace: schedule+0x29/0x70 schedule_preempt_disabled+0xe/0x10 __mutex_lock_slowpath+0x17b/0x220 mutex_lock+0x2b/0x50 cciss_unlocked_open+0x2f/0x110 [cciss] __blkdev_get+0xd3/0x470 blkdev_get+0x5c/0x1e0 register_disk+0x182/0x1a0 add_disk+0x17c/0x310 cciss_add_disk+0x13a/0x170 [cciss] cciss_update_drive_info+0x39b/0x480 [cciss] rebuild_lun_table+0x258/0x370 [cciss] cciss_ioctl+0x34f/0x470 [cciss] do_ioctl+0x49/0x70 [cciss] __blkdev_driver_ioctl+0x28/0x30 blkdev_ioctl+0x200/0x7b0 block_ioctl+0x3c/0x40 do_vfs_ioctl+0x89/0x350 SyS_ioctl+0xa1/0xb0 system_call_fastpath+0x16/0x1b This mutex usage was added into the ioctl path when the big kernel lock was removed. As it turns out, these paths are all thread safe anyway (or can easily be made so) and we don't want ioctl() to be single threaded in any case. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cce.hp.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Mike Miller <mike.miller@hp.com> Signed-off-by:
-
Robin Holt authored
commit cf7df378 upstream. We recently noticed that reboot of a 1024 cpu machine takes approx 16 minutes of just stopping the cpus. The slowdown was tracked to commit f96972f2 ("kernel/sys.c: call disable_nonboot_cpus() in kernel_restart()"). The current implementation does all the work of hot removing the cpus before halting the system. We are switching to just migrating to the boot cpu and then continuing with shutdown/reboot. This also has the effect of not breaking x86's command line parameter for specifying the reboot cpu. Note, this code was shamelessly copied from arch/x86/kernel/reboot.c with bits removed pertaining to the reboot_cpu command line parameter. Signed-off-by:
Robin Holt <holt@sgi.com> Tested-by:
Shawn Guo <shawn.guo@linaro.org> Cc: "Srivatsa S. Bhat" <srivatsa.bhat@linux.vnet.ibm.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Russ Anderson <rja@sgi.com> Cc: Robin Holt <holt@sgi.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by:
-
Srivatsa S. Bhat authored
commit 16e53dbf upstream. There are instances in the kernel where we would like to disable CPU hotplug (from sysfs) during some important operation. Today the freezer code depends on this and the code to do it was kinda tailor-made for that. Restructure the code and make it generic enough to be useful for other usecases too. Signed-off-by:
Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by:
-
Sujith Manoharan authored
commit 5efac949 upstream. The ath9k rate control algorithm has various architectural issues that make it a poor fit in scenarios like congested environments etc. An example: https://bugzilla.redhat.com/show_bug.cgi?id=927191 Change the default to minstrel which is more robust in such cases. The ath9k RC code is left in the driver for now, maybe it can be removed altogether later on. Signed-off-by:
Sujith Manoharan <c_manoha@qca.qualcomm.com> Cc: Jouni Malinen <jouni@qca.qualcomm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Sujith Manoharan authored
commit 531671cb upstream. Almost all the DMA issues which have plagued ath9k (in station mode) for years are related to PS. Disabling PS usually "fixes" the user's connection stablility. Reports of DMA problems are still trickling in and are sitting in the kernel bugzilla. Until the PS code in ath9k is given a thorough review, disbale it by default. The slight increase in chip power consumption is a small price to pay for improved link stability. Signed-off-by:
-
Johan Hedberg authored
commit 96570ffc upstream. If hci_dev_open fails we need to ensure that the corresponding mgmt_set_powered command gets an appropriate response. This patch fixes the missing response by adding a new mgmt_set_powered_failed function that's used to indicate a power on failure to mgmt. Since a situation with the device being rfkilled may require special handling in user space the patch uses a new dedicated mgmt status code for this. Signed-off-by:
Johan Hedberg <johan.hedberg@intel.com> Acked-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Gustavo Padovan <gustavo.padovan@collabora.co.uk> Signed-off-by:
-
Patrik Jakobsson authored
commit 22e7c385 upstream. The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Cedarview. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113Reviewed-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
-
Patrik Jakobsson authored
commit 820de86a upstream. The framebuffer needs to be unpinned in the crtc->disable callback because of previous pinning in psb_intel_pipe_set_base(). This will fix a memory leak where the framebuffer was released but not unpinned properly. This patch only affects Poulsbo. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=889511 Bugzilla: https://bugzilla.novell.com/show_bug.cgi?id=812113Reviewed-by:
-
Tony Lindgren authored
commit 24b8256a upstream. When booted in legacy mode device_init_wakeup() gets called by drivers/mfd/twl-core.c when the children are initialized. However, when booted using device tree, the children are created with of_platform_populate() instead add_children(). This means that the RTC driver will not have device_init_wakeup() set, and we need to call it from the driver probe like RTC drivers typically do. Without this we cannot test PM wake-up events on omaps for cases where there may not be any physical wake-up event. Signed-off-by:
Tony Lindgren <tony@atomide.com> Reported-by:
Kevin Hilman <khilman@linaro.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by:
-
Jim Schutt authored
commit 39be95e9 upstream. Ceph's encode_caps_cb() worked hard to not call __page_cache_alloc() while holding a lock, but it's spoiled because ceph_pagelist_addpage() always calls kmap(), which might sleep. Here's the result: [13439.295457] ceph: mds0 reconnect start [13439.300572] BUG: sleeping function called from invalid context at include/linux/highmem.h:58 [13439.309243] in_atomic(): 1, irqs_disabled(): 0, pid: 12059, name: kworker/1:1 . . . [13439.376225] Call Trace: [13439.378757] [<ffffffff81076f4c>] __might_sleep+0xfc/0x110 [13439.384353] [<ffffffffa03f4ce0>] ceph_pagelist_append+0x120/0x1b0 [libceph] [13439.391491] [<ffffffffa0448fe9>] ceph_encode_locks+0x89/0x190 [ceph] [13439.398035] [<ffffffff814ee849>] ? _raw_spin_lock+0x49/0x50 [13439.403775] [<ffffffff811cadf5>] ? lock_flocks+0x15/0x20 [13439.409277] [<ffffffffa045e2af>] encode_caps_cb+0x41f/0x4a0 [ceph] [13439.415622] [<ffffffff81196748>] ? igrab+0x28/0x70 [13439.420610] [<ffffffffa045e9f8>] ? iterate_session_caps+0xe8/0x250 [ceph] [13439.427584] [<ffffffffa045ea25>] iterate_session_caps+0x115/0x250 [ceph] [13439.434499] [<ffffffffa045de90>] ? set_request_path_attr+0x2d0/0x2d0 [ceph] [13439.441646] [<ffffffffa0462888>] send_mds_reconnect+0x238/0x450 [ceph] [13439.448363] [<ffffffffa0464542>] ? ceph_mdsmap_decode+0x5e2/0x770 [ceph] [13439.455250] [<ffffffffa0462e42>] check_new_map+0x352/0x500 [ceph] [13439.461534] [<ffffffffa04631ad>] ceph_mdsc_handle_map+0x1bd/0x260 [ceph] [13439.468432] [<ffffffff814ebc7e>] ? mutex_unlock+0xe/0x10 [13439.473934] [<ffffffffa043c612>] extra_mon_dispatch+0x22/0x30 [ceph] [13439.480464] [<ffffffffa03f6c2c>] dispatch+0xbc/0x110 [libceph] [13439.486492] [<ffffffffa03eec3d>] process_message+0x1ad/0x1d0 [libceph] [13439.493190] [<ffffffffa03f1498>] ? read_partial_message+0x3e8/0x520 [libceph] . . . [13439.587132] ceph: mds0 reconnect success [13490.720032] ceph: mds0 caps stale [13501.235257] ceph: mds0 recovery completed [13501.300419] ceph: mds0 caps renewed Fix it up by encoding locks into a buffer first, and when the number of encoded locks is stable, copy that into a ceph_pagelist. [elder@inktank.com: abbreviated the stack info a bit.] Signed-off-by:
Jim Schutt <jaschut@sandia.gov> Reviewed-by:
-
Jim Schutt authored
commit c420276a upstream. In his review, Alex Elder mentioned that he hadn't checked that num_fcntl_locks and num_flock_locks were properly decoded on the server side, from a le32 over-the-wire type to a cpu type. I checked, and AFAICS it is done; those interested can consult Locker::_do_cap_update() in src/mds/Locker.cc and src/include/encoding.h in the Ceph server code (git://github.com/ceph/ceph). I also checked the server side for flock_len decoding, and I believe that also happens correctly, by virtue of having been declared __le32 in struct ceph_mds_cap_reconnect, in src/include/ceph_fs.h. Signed-off-by:
-
Alex Elder authored
commit 14d2f38d upstream. An osd client has a red-black tree describing its osds, and occasionally we would get crashes due to one of these trees tree becoming corrupt somehow. The problem turned out to be that reset_changed_osds() was being called without protection of the osd client request mutex. That function would call __reset_osd() for any osd that had changed, and __reset_osd() would call __remove_osd() for any osd with no outstanding requests, and finally __remove_osd() would remove the corresponding entry from the red-black tree. Thus, the tree was getting modified without having any lock protection, and was vulnerable to problems due to concurrent updates. This appears to be the only osd tree updating path that has this problem. It can be fairly easily fixed by moving the call up a few lines, to just before the request mutex gets dropped in kick_requests(). This resolves: http://tracker.ceph.com/issues/5043Signed-off-by:
-
Kees Cook authored
commit e0e29b68 upstream. The module parameter "fwpostfix" is userspace controllable, unfiltered, and is used to define the firmware filename. b43_do_request_fw() populates ctx->errors[] on error, containing the firmware filename. b43err() parses its arguments as a format string. For systems with b43 hardware, this could lead to a uid-0 to ring-0 escalation. CVE-2013-2852 Signed-off-by:
-
- 13 Jun, 2013 10 commits
-
-
Greg Kroah-Hartman authored
-
Steven Rostedt authored
commit 7f49ef69 upstream. As ftrace_filter_lseek is now used with ftrace_pid_fops, it needs to be moved out of the #ifdef CONFIG_DYNAMIC_FTRACE section as the ftrace_pid_fops is defined when DYNAMIC_FTRACE is not. Signed-off-by:
Li Zefan <lizefan@huawei.com> Signed-off-by:
-
Namhyung Kim authored
commit 6a76f8c0 upstream. Currently set_ftrace_pid and set_graph_function files use seq_lseek for their fops. However seq_open() is called only for FMODE_READ in the fops->open() so that if an user tries to seek one of those file when she open it for writing, it sees NULL seq_file and then panic. It can be easily reproduced with following command: $ cd /sys/kernel/debug/tracing $ echo 1234 | sudo tee -a set_ftrace_pid In this example, GNU coreutils' tee opens the file with fopen(, "a") and then the fopen() internally calls lseek(). Link: http://lkml.kernel.org/r/1365663302-2170-1-git-send-email-namhyung@kernel.orgSigned-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Namhyung Kim <namhyung.kim@lge.com> Signed-off-by:
-
Patrik Jakobsson authored
commit cbbd379a upstream. By having a higher max resolution we can now set up a virtual framebuffer that spans several monitors. 4096 should be ok since we're gen 3 or higher and should be enough for most dual head setups. Bugzilla: https://bugs.launchpad.net/ubuntu/+source/xserver-xorg-video-modesetting/+bug/1169147Signed-off-by:
-
Ying Xue authored
commit a816e311 upstream. Pointers should not be compared to plain integers. Quiets the sparse warning: warning: Using plain integer as NULL pointer Signed-off-by:
Ying Xue <ying.xue@windriver.com> Cc: Lotfi Manseur <lotfi.manseur@gmail.com> Signed-off-by:
-
Jan Beulich authored
commit 51ac8893 upstream. ... as being guest triggerable (e.g. by invoking XEN_PCI_OP_enable_msi{,x} on a device not being MSI/MSI-X capable). This is CVE-2013-0231 / XSA-43. Also make the two messages uniform in both their wording and severity. Signed-off-by:
Jan Beulich <jbeulich@suse.com> Acked-by:
Ian Campbell <ian.campbell@citrix.com> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [stable tree: Added two extra #include files] Signed-off-by:
-
Ben Mesman authored
commit 45a211d7 upstream. Last year, a patch was made for the "HP t5740e Thin Client" (see http://lists.freedesktop.org/archives/dri-devel/2012-May/023245.html). This device reports an lvds panel, but does not really have one. The predecessor of this device is the "hp t5740", which also does not have an lvds panel. This patch will add the same quirk for this device. Signed-off-by:
Ben Mesman <ben@bnc.nl> Signed-off-by:
-
Egbert Eich authored
commit 53d3b4d7 upstream. In intel_sdvo_get_lvds_modes() the wrong i2c adapter record is used for DDC. Thus the code will always have to rely on a LVDS panel mode supplied by VBT. In most cases this succeeds, so this didn't get detected for quite a while. This regression seems to have been introduced in commit f899fc64 Author: Chris Wilson <chris@chris-wilson.co.uk> Date: Tue Jul 20 15:44:45 2010 -0700 drm/i915: use GMBUS to manage i2c links Signed-off-by:
Egbert Eich <eich@suse.de> Reviewed-by:
-
Huacai Chen authored
commit b7ea85a4 upstream. When GPU acceleration is disabled, drm_vblank_cleanup() will free the vblank-related data, such as vblank_refcount, vblank_inmodeset, etc. But we found that drm_vblank_post_modeset() may be called after the cleanup, which use vblank_refcount and vblank_inmodeset. And this will cause a kernel panic. Fix this by return immediately if dev->num_crtcs is zero. This is the same thing that drm_vblank_pre_modeset() does. Call trace of a drm_vblank_post_modeset() after drm_vblank_cleanup(): [ 62.628906] [<ffffffff804868d0>] drm_vblank_post_modeset+0x34/0xb4 [ 62.628906] [<ffffffff804c7008>] atombios_crtc_dpms+0xb4/0x174 [ 62.628906] [<ffffffff804c70e0>] atombios_crtc_commit+0x18/0x38 [ 62.628906] [<ffffffff8047f038>] drm_crtc_helper_set_mode+0x304/0x3cc [ 62.628906] [<ffffffff8047f92c>] drm_crtc_helper_set_config+0x6d8/0x988 [ 62.628906] [<ffffffff8047dd40>] drm_fb_helper_set_par+0x94/0x104 [ 62.628906] [<ffffffff80439d14>] fbcon_init+0x424/0x57c [ 62.628906] [<ffffffff8046a638>] visual_init+0xb8/0x118 [ 62.628906] [<ffffffff8046b9f8>] take_over_console+0x238/0x384 [ 62.628906] [<ffffffff80436df8>] fbcon_takeover+0x7c/0xdc [ 62.628906] [<ffffffff8024fa20>] notifier_call_chain+0x44/0x94 [ 62.628906] [<ffffffff8024fcbc>] __blocking_notifier_call_chain+0x48/0x68 [ 62.628906] [<ffffffff8042d990>] register_framebuffer+0x228/0x260 [ 62.628906] [<ffffffff8047e010>] drm_fb_helper_single_fb_probe+0x260/0x314 [ 62.628906] [<ffffffff8047e2c4>] drm_fb_helper_initial_config+0x200/0x234 [ 62.628906] [<ffffffff804e5560>] radeon_fbdev_init+0xd4/0xf4 [ 62.628906] [<ffffffff804e0e08>] radeon_modeset_init+0x9bc/0xa18 [ 62.628906] [<ffffffff804bfc14>] radeon_driver_load_kms+0xdc/0x12c [ 62.628906] [<ffffffff8048b548>] drm_get_pci_dev+0x148/0x238 [ 62.628906] [<ffffffff80423564>] local_pci_probe+0x5c/0xd0 [ 62.628906] [<ffffffff80241ac4>] work_for_cpu_fn+0x1c/0x30 [ 62.628906] [<ffffffff802427c8>] process_one_work+0x274/0x3bc [ 62.628906] [<ffffffff80242934>] process_scheduled_works+0x24/0x44 [ 62.628906] [<ffffffff8024515c>] worker_thread+0x31c/0x3f4 [ 62.628906] [<ffffffff802497a8>] kthread+0x88/0x90 [ 62.628906] [<ffffffff80206794>] kernel_thread_helper+0x10/0x18 Signed-off-by:
Huacai Chen <chenhc@lemote.com> Signed-off-by:
Binbin Zhou <zhoubb@lemote.com> Reviewed-by:
Michel Dänzer <michel.daenzer@amd.com> Acked-by:
Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by:
Dave Airlie <airlied@gmail.com> Signed-off-by:
-
Guenter Roeck authored
commit 591bfcfc upstream. On a system with both MAX1617 and JC42 sensors, JC42 sensors can be misdetected as LM84. Strengthen detection sufficiently enough to avoid this misdetection. Also improve detection for ADM1021. Modeled after chip detection code in sensors-detect command. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Tested-by:
Jean Delvare <khali@linux-fr.org> Acked-by:
-
