- 30 Dec, 2008 40 commits
-
-
Douglas Schilling Landgraf authored
Added specific entry for WinTV-HVR 850 Signed-off-by:
Douglas Schilling Landgraf <dougsland@linuxtv.org> Signed-off-by:
Mauro Carvalho Chehab <mchehab@redhat.com>
-
Robert Jarzmik authored
Use the new format-negotiation infrastructure, support all four YUV422 packed and the planar formats. The new translation structure enables to build the format list with buswidth, depth, host format and camera format checked, so that it's not done anymore on try_fmt nor set_fmt. Signed-off-by:
Robert Jarzmik <robert.jarzmik@free.fr> Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Allocate and fill a list of formats, supported by this specific camera-host combination. Use it for format enumeration. Take care to stay backwards-compatible. Camera hosts rely on sensor formats available, as well as host specific translations. We add a structure so that hosts can define a translation table and use it for format check and setup. Signed-off-by:
-
Guennadi Liakhovetski authored
This pointer will be used by pxa_camera.c to point to its pixel format data. Signed-off-by:
-
Guennadi Liakhovetski authored
We anyway don't follow the s_fmt_vid_cap / g_fmt_vid_cap / try_fmt_vid_cap naming, and soc-camera is so far only about video capture, let's simplify operation names a bit further. set_fmt_cap / try_fmt_cap wasn't a very good choice too. Signed-off-by:
-
Guennadi Liakhovetski authored
Pixel format requested by the user is not necessarily the same, as what a sensor driver provides. There are situations, when a camera host driver provides the required format, but requires a different format from the sensor. Further, the list of formats, supported by sensors is pretty static and can be pretty good described with a constant list of structures. Whereas decisions, made by camera host drivers to support requested formats can be quite complex, therefore it is better to let the host driver do the work. Signed-off-by:
-
Guennadi Liakhovetski authored
Minor formatting fixes Signed-off-by:
-
Guennadi Liakhovetski authored
.try_bus_param() method from struct soc_camera_host_ops is only called at one location immediately before .try_fmt_cap(), there is no value in keeping these two methods separate, merge them. Signed-off-by:
Guennadi Liakhovetski <lg@denx.de> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
Kuninori Morimoto <morimoto.kuninori@renesas.com> Signed-off-by:
-
Kuninori Morimoto authored
Signed-off-by:
-
Andy Walls authored
cx18: cx18_writel_expect() should not declare success on a PCI read error. This removes the potential for cx18_write*_expect() calls to not accomplish a PCI write successfully as expected. The CX18-AV core uses the *expect() calls often and this may be the source of intermittent audio problems and standands switching problems. Signed-off-by:
Andy Walls <awalls@radix.net> Signed-off-by:
-
Andy Walls authored
cx18: Change to per CX23418 device work queues for deferrable work handling. Needed to support 2.6.22 and earlier kernels that can't selectively cancel work orders. Also will provide slightly better performance on SMP systems. Signed-off-by:
-
Mauro Carvalho Chehab authored
tda8290 were using some random video standard for FM. This results on random errors. Instead, program tda8290 in expert mode, using a configuration near the one specified on NXP datasheet for tda8295 (available on their site). Also, properly display that the device is on radio mode. Signed-off-by: -
Mauro Carvalho Chehab authored
Probably due to a removed code, tda827x were doing some wrong calculus at the returned frequency. I suspect that the original idea were to return the programmed divisor converted into frequency again. However, the current code is sometimes multiplying the programmed frequency by 62500, and, on other cases, like radio, it dividing it by 1000. Instead of doing such math, let's just store the frequency value as requested by the caller module. Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: -
Mauro Carvalho Chehab authored
Cc: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: -
Mauro Carvalho Chehab authored
Thanks to Sistema Fenix (http://www.sistemafenix.com.br/) for sponsoring this development. Signed-off-by:
Gilberto <gilberto@sistemafenix.com.br> Signed-off-by:
-
Mauro Carvalho Chehab authored
/home/mauro/v4l-dvb/v4l/tuner-xc2028.c: In function 'xc2028_sleep': /home/mauro/v4l-dvb/v4l/tuner-xc2028.c:1111: warning: 'return' with no value, in function returning non-void Signed-off-by: -
Mauro Carvalho Chehab authored
em28xx devices generally get hot when xc3028 tuner is powered on. This patch solves this by turning power off when the device is not used, at the expense of having a higher load time, when calling a TV application. Since firmware load happens on 1 or 2 seconds on most devices, this is not a pain. Also, it helps to save the planet by saving some power :) Signed-off-by: -
Mauro Carvalho Chehab authored
Since the firmware load is now fast on most boards, better to keep the tuner off by default. A modprobe parameter were added to keep the old behavior, to be used by old devices. Signed-off-by: -
Mauro Carvalho Chehab authored
Change log format to look more like URB transactions. In fact, setup and IN/OUT transactions are merged. This helps to debug the driver. Signed-off-by: -
Michael Krufky authored
Power the LNA while the frontend is in use. Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Andy Walls authored
cx18: Quiet a sometimes common warning that often has benign consequences. No one probably cares that the firmware took forever to ack our command, as they always seem to succeed whether or not the firmware acks it in a reasonable amount of time. Signed-off-by:
-
Andy Walls authored
Update the version number due to significant changes in the way the mailboxes and interrupts are handled. Signed-off-by:
-
Andy Walls authored
Add copyright attribution for files modified by awalls in 2008 Signed-off-by:
-
Andy Walls authored
cx18: Adjust outgoing mailbox timeouts and remove statistics logging. This saves some wasted storage in struct cx18 for each card. Cutting the outgoing mailbox timeouts in half from the previous value appears to be safe with MythTV. Got rid of interrupted case code path after a wait uninterruptable returns. Signed-off-by:
-
Andy Walls authored
Restore buffers that have fallen out of the transfer rotation, and check for coherent mailbox data when processing a stale mailbox. Signed-off-by:
-
Andy Walls authored
Remove unnecessary MMIO accesses in time critical irq handling path. Also ensured that the mailbox ack field is read in last, so we know for sure if we have a stale mailbox or not on receipt. Signed-off-by:
-
Andy Walls authored
cx18: Streamline cx18-io[ch] wrappers and enforce MMIO retry strategy so that write retries always occur and read retries never occur (as they never help). Remove MMIO statistics logging to speed up MMIO accesses. Deprecate & ignore retry_mmio and mmio_ndelay module parameters, to essentially force retry_mmio=1 and mmio_ndelay=0. Signed-off-by:
-
Andy Walls authored
cx18: Propagate staleness of mailbox and mdl ack data to work handler to let the work handler know that the data from the encoder may not be coherent. Allows for smarter handling of buffers in future, to deal with MDLs that fall out of rotation due to irq handler being late in collecting mailbox and mdl ack info. Signed-off-by:
-
Andy Walls authored
Convert the per stream queue spinlocks into mutexes. All queue manipulation happens via the work queue or system calls into the driver, and not in an interrupt context. This reduces the amout of time the cx18 driver keeps interrupts disabled. Signed-off-by:
-
Andy Walls authored
Change to singlethreaded global work queue thread for deferable work, instead of the kernel default multithreaded work queue. This ensures execution of deferable work is always in the proper order, so caputred buffers don't get reordered. Signed-off-by:
-
Andy Walls authored
A major rewrite of interrupt handling for incoming mailbox processing, to split the timing critical steps from the the deferrable steps as the sending XPU on the CX23418 will time out and overwrite our incoming mailboxes rather quickly. Setup a pool of work "order forms" for the irq handler to send jobs to the new work handler routine which uses the kernel default work queue to do the deferrable work. Started optimizing some of the cx18-io calls as they are now the low hanging fruit for recoving microseconds back from the timeline. Future optimizations will get rid of mmio read retries, mmio stats logging, and combine smaller functions in the irq path into the larger ones to save ~2 us each. Signed-off-by:
-
Jean-Francois Moine authored
Signed-off-by:
Jean-Francois Moine <moinejf@free.fr> Signed-off-by:
-
Hans de Goede authored
Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Alexey Klimov authored
This patch fixes problems(kernel oopses) with unplug of device while it's working. Patch adds disconnect_lock mutex, changes usb_amradio_close and usb_amradio_disconnect functions and adds a lot of safety checks. Signed-off-by:
Alexey Klimov <klimov.linux@gmail.com> Signed-off-by:
-
Andy Walls authored
If APU firmware file read failed, the jump vector to the APU was undefined and the APU would be started executing garbage. Fix uninitialized variable to be an infinite loop for the APU, but also bail out before even starting the APU. Signed-off-by:
-
Andy Walls authored
When the CX23418 CPU unit sent out an ack interrupt to the linux driver, it also received that interrupt and cleared the flag before the linux driver could see what the interrupt was for. This fix prevents the CPU from receiving an IRQ for it's own outgoing ack's to the linux driver. This fix is critical now that the linux driver doesn't poll but relies on these ack interrupts. Signed-off-by:
-
Andy Walls authored
Use the APU fw start address from rom file instead of a hardcoded entry vector. Fixed cx18_setup_page() calls to use the correct APU image load addresses. Signed-off-by:
-
Andy Walls authored
All waits for cx18 mailbox API commands are now uninterruptable. Added code to collect mailbox ack statistics. Tweaked timeouts based on collected stats and video vertical frame and field rates. Signed-off-by:
-
Andy Walls authored
cx18: Improve handling of outgoing mailboxes detected to be busy. When encountering a busy mailbox, sleep instead of polling, and wait for interrupt or timeout. If the mailbox is still busy, force it free. When sending commands, make sure we never create a situation where we mark the mailbox busy upon sending, and ensure we always have a method to cleanly recover from a busy mailbox. Signed-off-by:
-
