- 17 Feb, 2021 33 commits
-
-
Frederic Weisbecker authored
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP kthread (rcuog) to be serviced. Unfortunately the call to rcu_user_enter() is already past the last rescheduling opportunity before we resume to userspace or to guest mode. We may escape there with the woken task ignored. The ultimate resort to fix every callsites is to trigger a self-IPI (nohz_full depends on arch to implement arch_irq_work_raise()) that will trigger a reschedule on IRQ tail or guest exit. Eventually every site that want a saner treatment will need to carefully place a call to rcu_nocb_flush_deferred_wakeup() before the last explicit need_resched() check upon resume. Fixes: 96d3fd0d (rcu: Break call_rcu() deadlock involving scheduler and perf) Reported-by:
Paul E. McKenney <paulmck@kernel.org> Signed-off-by:
Frederic Weisbecker <frederic@kernel.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210131230548.32970-4-frederic@kernel.org
-
Frederic Weisbecker authored
Entering RCU idle mode may cause a deferred wake up of an RCU NOCB_GP kthread (rcuog) to be serviced. Usually a local wake up happening while running the idle task is handled in one of the need_resched() checks carefully placed within the idle loop that can break to the scheduler. Unfortunately the call to rcu_idle_enter() is already beyond the last generic need_resched() check and we may halt the CPU with a resched request unhandled, leaving the task hanging. Fix this with splitting the rcuog wakeup handling from rcu_idle_enter() and place it before the last generic need_resched() check in the idle loop. It is then assumed that no call to call_rcu() will be performed after that in the idle loop until the CPU is put in low power mode. Fixes: 96d3fd0d (rcu: Break call_rcu() deadlock involving scheduler and perf) Reported-by:
-
Frederic Weisbecker authored
Deferred wakeup of rcuog kthreads upon RCU idle mode entry is going to be handled differently whether initiated by idle, user or guest. Prepare with pulling that control up to rcu_eqs_enter() callers. Signed-off-by:
-
Juri Lelli authored
The HRTICK feature has traditionally been servicing configurations that need precise preemptions point for NORMAL tasks. More recently, the feature has been extended to also service DEADLINE tasks with stringent runtime enforcement needs (e.g., runtime < 1ms with HZ=1000). Enabling HRTICK sched feature currently enables the additional timer and task tick for both classes, which might introduced undesired overhead for no additional benefit if one needed it only for one of the cases. Separate HRTICK sched feature in two (and leave the traditional case name unmodified) so that it can be selectively enabled when needed. With: $ echo HRTICK > /sys/kernel/debug/sched_features the NORMAL/fair hrtick gets enabled. With: $ echo HRTICK_DL > /sys/kernel/debug/sched_features the DEADLINE hrtick gets enabled. Signed-off-by:
Juri Lelli <juri.lelli@redhat.com> Signed-off-by:
Luis Claudio R. Goncalves <lgoncalv@redhat.com> Signed-off-by:
Daniel Bristot de Oliveira <bristot@redhat.com> Signed-off-by:
-
Juri Lelli authored
Hung tasks and RCU stall cases were reported on systems which were not 100% busy. Investigation of such unexpected cases (no sign of potential starvation caused by tasks hogging the system) pointed out that the periodic sched tick timer wasn't serviced anymore after a certain point and that caused all machinery that depends on it (timers, RCU, etc.) to stop working as well. This issues was however only reproducible if HRTICK was enabled. Looking at core dumps it was found that the rbtree of the hrtimer base used also for the hrtick was corrupted (i.e. next as seen from the base root and actual leftmost obtained by traversing the tree are different). Same base is also used for periodic tick hrtimer, which might get "lost" if the rbtree gets corrupted. Much alike what described in commit 1f71addd ("tick/sched: Do not mess with an enqueued hrtimer") there is a race window between hrtimer_set_expires() in hrtick_start and hrtimer_start_expires() in __hrtick_restart() in which the former might be operating on an already queued hrtick hrtimer, which might lead to corruption of the base. Use hrtick_start() (which removes the timer before enqueuing it back) to ensure hrtick hrtimer reprogramming is entirely guarded by the base lock, so that no race conditions can occur. Signed-off-by:
-
Dietmar Eggemann authored
dl_add_task_root_domain() is called during sched domain rebuild: rebuild_sched_domains_locked() partition_and_rebuild_sched_domains() rebuild_root_domains() for all top_cpuset descendants: update_tasks_root_domain() for all tasks of cpuset: dl_add_task_root_domain() Change it so that only the task pi lock is taken to check if the task has a SCHED_DEADLINE (DL) policy. In case that p is a DL task take the rq lock as well to be able to safely de-reference root domain's DL bandwidth structure. Most of the tasks will have another policy (namely SCHED_NORMAL) and can now bail without taking the rq lock. One thing to note here: Even in case that there aren't any DL user tasks, a slow frequency switching system with cpufreq gov schedutil has a DL task (sugov) per frequency domain running which participates in DL bandwidth management. Signed-off-by:Dietmar Eggemann <dietmar.eggemann@arm.com> Signed-off-by:
Quentin Perret <qperret@google.com> Reviewed-by:
Valentin Schneider <valentin.schneider@arm.com> Reviewed-by:
-
Sven Schnelle authored
commit c6bc9bd06dff ("rbtree, uprobes: Use rbtree helpers") accidentally removed the refcount increase. Add it again. Fixes: c6bc9bd06dff ("rbtree, uprobes: Use rbtree helpers") Signed-off-by:Sven Schnelle <svens@linux.ibm.com> Signed-off-by:
-
Sebastian Andrzej Siewior authored
send_call_function_single_ipi() may wake an idle CPU without sending an IPI. The woken up CPU will process the SMP-functions in flush_smp_call_function_from_idle(). Any raised softirq from within the SMP-function call will not be processed. Should the CPU have no tasks assigned, then it will go back to idle with pending softirqs and the NOHZ will rightfully complain. Process pending softirqs on return from flush_smp_call_function_queue(). Fixes: b2a02fc4 ("smp: Optimize send_call_function_single_ipi()") Reported-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by:
-
Peter Zijlstra authored
Use the new EXPORT_STATIC_CALL_TRAMP() / static_call_mod() to unexport the static_call_key for the PREEMPT_DYNAMIC calls such that modules can no longer update these calls. Having modules change/hi-jack the preemption calls would be horrible. Signed-off-by:
-
Josh Poimboeuf authored
When exporting static_call_key; with EXPORT_STATIC_CALL*(), the module can use static_call_update() to change the function called. This is not desirable in general. Not exporting static_call_key however also disallows usage of static_call(), since objtool needs the key to construct the static_call_site. Solve this by allowing objtool to create the static_call_site using the trampoline address when it builds a module and cannot find the static_call_key symbol. The module loader will then try and map the trampole back to a key before it constructs the normal sites list. Doing this requires a trampoline -> key associsation, so add another magic section that keeps those. Originally-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Peter Zijlstra authored
Add a debugfs file to muck about with the preempt mode at runtime. Signed-off-by:
-
Peter Zijlstra (Intel) authored
Support the preempt= boot option and patch the static call sites accordingly. Signed-off-by:
-
Peter Zijlstra (Intel) authored
Provide static call to control IRQ preemption (called in CONFIG_PREEMPT) so that we can override its behaviour when preempt= is overriden. Since the default behaviour is full preemption, its call is initialized to provide IRQ preemption when preempt= isn't passed. Signed-off-by:
-
Peter Zijlstra (Intel) authored
Provide static calls to control preempt_schedule[_notrace]() (called in CONFIG_PREEMPT) so that we can override their behaviour when preempt= is overriden. Since the default behaviour is full preemption, both their calls are initialized to the arch provided wrapper, if any. [fweisbec: only define static calls when PREEMPT_DYNAMIC, make it less dependent on x86 with __preempt_schedule_func] Signed-off-by: -
Peter Zijlstra (Intel) authored
Provide static calls to control cond_resched() (called in !CONFIG_PREEMPT) and might_resched() (called in CONFIG_PREEMPT_VOLUNTARY) to that we can override their behaviour when preempt= is overriden. Since the default behaviour is full preemption, both their calls are ignored when preempt= isn't passed. [fweisbec: branch might_resched() directly to __cond_resched(), only define static calls when PREEMPT_DYNAMIC] Signed-off-by: -
Michal Hocko authored
Preemption mode selection is currently hardcoded on Kconfig choices. Introduce a dedicated option to tune preemption flavour at boot time, This will be only available on architectures efficiently supporting static calls in order not to tempt with the feature against additional overhead that might be prohibitive or undesirable. CONFIG_PREEMPT_DYNAMIC is automatically selected by CONFIG_PREEMPT if the architecture provides the necessary support (CONFIG_STATIC_CALL_INLINE, CONFIG_GENERIC_ENTRY, and provide with __preempt_schedule_function() / __preempt_schedule_notrace_function()). Suggested-by:
Michal Hocko <mhocko@suse.com> Signed-off-by:
-
Frederic Weisbecker authored
DECLARE_STATIC_CALL() must pass the original function targeted for a given static call. But DEFINE_STATIC_CALL() may want to initialize it as off. In this case we can't pass NULL (for functions without return value) or __static_call_return0 (for functions returning a value) directly to DEFINE_STATIC_CALL() as that may trigger a static call redeclaration with a different function prototype. Type casts neither can work around that as they don't get along with typeof(). The proper way to do that for functions that don't return a value is to use DEFINE_STATIC_CALL_NULL(). But functions returning a actual value don't have an equivalent yet. Provide DEFINE_STATIC_CALL_RET0() to solve this situation. Signed-off-by:
-
Peter Zijlstra authored
Provide a stub function that return 0 and wire up the static call site patching to replace the CALL with a single 5 byte instruction that clears %RAX, the return value register. The function can be cast to any function pointer type that has a single %RAX return (including pointers). Also provide a version that returns an int for convenience. We are clearing the entire %RAX register in any case, whether the return value is 32 or 64 bits, since %RAX is always a scratch register anyway. Signed-off-by:
-
Peter Zijlstra authored
Some static call declarations are going to be needed on low level header files. Move the necessary material to the dedicated static call types header to avoid inclusion dependency hell. Signed-off-by:
-
Dietmar Eggemann authored
The description of the RT offset and the values for 'normal' tasks needs update. Moreover there are DL tasks now. task_prio() has to stay like it is to guarantee compatibility with the /proc/<pid>/stat priority field: # cat /proc/<pid>/stat | awk '{ print $18; }' Signed-off-by: -
Dietmar Eggemann authored
The only remaining use of MAX_USER_PRIO (and USER_PRIO) is the SCALE_PRIO() definition in the PowerPC Cell architecture's Synergistic Processor Unit (SPU) scheduler. TASK_USER_PRIO isn't used anymore. Commit fe443ef2 ("[POWERPC] spusched: Dynamic timeslicing for SCHED_OTHER") copied SCALE_PRIO() from the task scheduler in v2.6.23. Commit a4ec24b4 ("sched: tidy up SCHED_RR") removed it from the task scheduler in v2.6.24. Commit 3ee237dd ("sched/prio: Add 3 macros of MAX_NICE, MIN_NICE and NICE_WIDTH in prio.h") introduced NICE_WIDTH much later. With: MAX_USER_PRIO = USER_PRIO(MAX_PRIO) = MAX_PRIO - MAX_RT_PRIO MAX_PRIO = MAX_RT_PRIO + NICE_WIDTH MAX_USER_PRIO = MAX_RT_PRIO + NICE_WIDTH - MAX_RT_PRIO MAX_USER_PRIO = NICE_WIDTH MAX_USER_PRIO can be replaced by NICE_WIDTH to be able to remove all the {*_}USER_PRIO defines. Signed-off-by:
-
Dietmar Eggemann authored
Commit d46523ea ("[PATCH] fix MAX_USER_RT_PRIO and MAX_RT_PRIO") was introduced due to a a small time period in which the realtime patch set was using different values for MAX_USER_RT_PRIO and MAX_RT_PRIO. This is no longer true, i.e. now MAX_RT_PRIO == MAX_USER_RT_PRIO. Get rid of MAX_USER_RT_PRIO and make everything use MAX_RT_PRIO instead. Signed-off-by:
-
Dietmar Eggemann authored
Commit "sched/topology: Make sched_init_numa() use a set for the deduplicating sort" allocates 'i + nr_levels (level)' instead of 'i + nr_levels + 1' sched_domain_topology_level. This led to an Oops (on Arm64 juno with CONFIG_SCHED_DEBUG): sched_init_domains build_sched_domains() __free_domain_allocs() __sdt_free() { ... for_each_sd_topology(tl) ... sd = *per_cpu_ptr(sdd->sd, j); <-- ... } Signed-off-by:Vincent Guittot <vincent.guittot@linaro.org> Tested-by:
Barry Song <song.bao.hua@hisilicon.com> Link: https://lkml.kernel.org/r/6000e39e-7d28-c360-9cd6-8798fd22a9bf@arm.com
-
Peter Zijlstra authored
Reduce rbtree boiler plate by using the new helpers. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de>
-
Peter Zijlstra authored
Reduce rbtree boiler plate by using the new helpers. Signed-off-by:
-
Peter Zijlstra authored
Reduce rbtree boilerplate by using the new helpers. Signed-off-by:
-
Peter Zijlstra authored
Reduce rbtree boiler plate by using the new helpers. One noteworthy change is unification of the various (partial) compare functions. We construct a subtree match by forcing the sub-order to always match, see __group_cmp(). Due to 'const' we had to touch cgroup_id(). Signed-off-by:
Tejun Heo <tj@kernel.org> Acked-by:
-
Peter Zijlstra authored
Reduce rbtree boiler plate by using the new helpers. Make rb_add_cached() / rb_erase_cached() return a pointer to the leftmost node to aid in updating additional state. Signed-off-by:
-
Peter Zijlstra authored
Reduce rbtree boiler plate by using the new helper function. Signed-off-by:
-
Peter Zijlstra authored
I've always been bothered by the endless (fragile) boilerplate for rbtree, and I recently wrote some rbtree helpers for objtool and figured I should lift them into the kernel and use them more widely. Provide: partial-order; less() based: - rb_add(): add a new entry to the rbtree - rb_add_cached(): like rb_add(), but for a rb_root_cached total-order; cmp() based: - rb_find(): find an entry in an rbtree - rb_find_add(): find an entry, and add if not found - rb_find_first(): find the first (leftmost) matching entry - rb_next_match(): continue from rb_find_first() - rb_for_each(): iterate a sub-tree using the previous two Inlining and constant propagation should see the compiler inline the whole thing, including the various compare functions. Signed-off-by:
Michel Lespinasse <walken@google.com> Acked-by:
-
Mel Gorman authored
Both select_idle_core() and select_idle_cpu() do a loop over the same cpumask. Observe that by clearing the already visited CPUs, we can fold the iteration and iterate a core at a time. All we need to do is remember any non-idle CPU we encountered while scanning for an idle core. This way we'll only iterate every CPU once. Signed-off-by:
Mel Gorman <mgorman@techsingularity.net> Signed-off-by:
-
Mel Gorman authored
In order to make the next patch more readable, and to quantify the actual effectiveness of this pass, start by removing it. Signed-off-by:
-
Ingo Molnar authored
Signed-off-by:
-
- 14 Feb, 2021 7 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-ledsLinus Torvalds authored
Pull LED fix from Pavel Machek: "One-liner fixing a build problem" * 'for-rc8-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/pavel/linux-leds: leds: rt8515: add V4L2_FLASH_LED_CLASS dependency
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64 - Use pkg-config for scripts/sign-file.c CFLAGS * tag 'kbuild-fixes-v5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: scripts: set proper OpenSSL include dir also for sign-file sparc: remove wrong comment from arch/sparc/include/asm/Kbuild kbuild: fix CONFIG_TRIM_UNUSED_KSYMS build for ppc64
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: "I kinda knew while typing 'I hope this is the last batch of x86/urgent updates' last week, Murphy was reading too and uttered 'Hold my beer!'. So here's more fixes... Thanks Murphy. Anyway, three more x86/urgent fixes for 5.11 final. We should be finally ready (famous last words). :-) - An SGX use after free fix - A fix for the fix to disable CET instrumentation generation for kernel code. We forgot 32-bit, which we seem to do very often nowadays - A Xen PV fix to irqdomain init ordering" * tag 'x86_urgent_for_v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/pci: Create PCI/MSI irqdomain after x86_init.pci.arch_init() x86/build: Disable CET instrumentation in the kernel for 32-bit too x86/sgx: Maintain encl->refcount for each encl->mm_list entry -
Arnd Bergmann authored
The leds-rt8515 driver can optionall use the v4l2 flash led class, but it causes a link error when that class is in a loadable module and the rt8515 driver itself is built-in: ld.lld: error: undefined symbol: v4l2_flash_init >>> referenced by leds-rt8515.c >>> leds/flash/leds-rt8515.o:(rt8515_probe) in archive drivers/built-in.a Adding 'depends on V4L2_FLASH_LED_CLASS' in Kconfig would avoid that, but it would make it impossible to use the driver without the v4l2 support. Add the same dependency that the other users of this class have instead, which just prevents the broken configuration. Fixes: e1c6edcb ("leds: rt8515: Add Richtek RT8515 LED driver") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Pavel Machek <pavel@ucw.cz>
-
Rolf Eike Beer authored
Fixes: 2cea4a7a ("scripts: use pkg-config to locate libcrypto") Signed-off-by:
Rolf Eike Beer <eb@emlix.com> Cc: stable@vger.kernel.org # 5.6.x Signed-off-by:
Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
These are NOT exported to userspace. The headers listed in arch/sparc/include/uapi/asm/Kbuild are exported. Signed-off-by:
-
