1. 27 Apr, 2017 6 commits
    • Sachin Prabhu's avatar
      cifs: Do not send echoes before Negotiate is complete · f8fe51c8
      Sachin Prabhu authored
      commit 62a6cfdd upstream.
      
      commit 4fcd1813 ("Fix reconnect to not defer smb3 session reconnect
      long after socket reconnect") added support for Negotiate requests to
      be initiated by echo calls.
      
      To avoid delays in calling echo after a reconnect, I added the patch
      introduced by the commit b8c60012 ("Call echo service immediately
      after socket reconnect").
      
      This has however caused a regression with cifs shares which do not have
      support for echo calls to trigger Negotiate requests. On connections
      which need to call Negotiation, the echo calls trigger an error which
      triggers a reconnect which in turn triggers another echo call. This
      results in a loop which is only broken when an operation is performed on
      the cifs share. For an idle share, it can DOS a server.
      
      The patch uses the smb_operation can_echo() for cifs so that it is
      called only if connection has been already been setup.
      
      kernel bz: 194531
      Signed-off-by: default avatarSachin Prabhu <sprabhu@redhat.com>
      Tested-by: default avatarJonathan Liu <net147@gmail.com>
      Acked-by: default avatarPavel Shilovsky <pshilov@microsoft.com>
      Signed-off-by: default avatarSteve French <smfrench@gmail.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f8fe51c8
    • Steven Rostedt (VMware)'s avatar
      ring-buffer: Have ring_buffer_iter_empty() return true when empty · a2a67e53
      Steven Rostedt (VMware) authored
      commit 78f7a45d upstream.
      
      I noticed that reading the snapshot file when it is empty no longer gives a
      status. It suppose to show the status of the snapshot buffer as well as how
      to allocate and use it. For example:
      
       ># cat snapshot
       # tracer: nop
       #
       #
       # * Snapshot is allocated *
       #
       # Snapshot commands:
       # echo 0 > snapshot : Clears and frees snapshot buffer
       # echo 1 > snapshot : Allocates snapshot buffer, if not already allocated.
       #                      Takes a snapshot of the main buffer.
       # echo 2 > snapshot : Clears snapshot buffer (but does not allocate or free)
       #                      (Doesn't have to be '2' works with any number that
       #                       is not a '0' or '1')
      
      But instead it just showed an empty buffer:
      
       ># cat snapshot
       # tracer: nop
       #
       # entries-in-buffer/entries-written: 0/0   #P:4
       #
       #                              _-----=> irqs-off
       #                             / _----=> need-resched
       #                            | / _---=> hardirq/softirq
       #                            || / _--=> preempt-depth
       #                            ||| /     delay
       #           TASK-PID   CPU#  ||||    TIMESTAMP  FUNCTION
       #              | |       |   ||||       |         |
      
      What happened was that it was using the ring_buffer_iter_empty() function to
      see if it was empty, and if it was, it showed the status. But that function
      was returning false when it was empty. The reason was that the iter header
      page was on the reader page, and the reader page was empty, but so was the
      buffer itself. The check only tested to see if the iter was on the commit
      page, but the commit page was no longer pointing to the reader page, but as
      all pages were empty, the buffer is also.
      
      Fixes: 651e22f2 ("ring-buffer: Always reset iterator to reader page")
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a2a67e53
    • Steven Rostedt (VMware)'s avatar
      tracing: Allocate the snapshot buffer before enabling probe · 1dfb1c7b
      Steven Rostedt (VMware) authored
      commit df62db5b upstream.
      
      Currently the snapshot trigger enables the probe and then allocates the
      snapshot. If the probe triggers before the allocation, it could cause the
      snapshot to fail and turn tracing off. It's best to allocate the snapshot
      buffer first, and then enable the trigger. If something goes wrong in the
      enabling of the trigger, the snapshot buffer is still allocated, but it can
      also be freed by the user by writting zero into the snapshot buffer file.
      
      Also add a check of the return status of alloc_snapshot().
      
      Fixes: 77fd5c15 ("tracing: Add snapshot trigger to function probes")
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      1dfb1c7b
    • Eric Biggers's avatar
      KEYS: fix keyctl_set_reqkey_keyring() to not leak thread keyrings · c9460fbc
      Eric Biggers authored
      commit c9f838d1 upstream.
      
      This fixes CVE-2017-7472.
      
      Running the following program as an unprivileged user exhausts kernel
      memory by leaking thread keyrings:
      
      	#include <keyutils.h>
      
      	int main()
      	{
      		for (;;)
      			keyctl_set_reqkey_keyring(KEY_REQKEY_DEFL_THREAD_KEYRING);
      	}
      
      Fix it by only creating a new thread keyring if there wasn't one before.
      To make things more consistent, make install_thread_keyring_to_cred()
      and install_process_keyring_to_cred() both return 0 if the corresponding
      keyring is already present.
      
      Fixes: d84f4f99 ("CRED: Inaugurate COW credentials")
      Signed-off-by: default avatarEric Biggers <ebiggers@google.com>
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c9460fbc
    • David Howells's avatar
      KEYS: Change the name of the dead type to ".dead" to prevent user access · eb78d987
      David Howells authored
      commit c1644fe0 upstream.
      
      This fixes CVE-2017-6951.
      
      Userspace should not be able to do things with the "dead" key type as it
      doesn't have some of the helper functions set upon it that the kernel
      needs.  Attempting to use it may cause the kernel to crash.
      
      Fix this by changing the name of the type to ".dead" so that it's rejected
      up front on userspace syscalls by key_get_type_from_user().
      
      Though this doesn't seem to affect recent kernels, it does affect older
      ones, certainly those prior to:
      
      	commit c06cfb08
      	Author: David Howells <dhowells@redhat.com>
      	Date:   Tue Sep 16 17:36:06 2014 +0100
      	KEYS: Remove key_type::match in favour of overriding default by match_preparse
      
      which went in before 3.18-rc1.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eb78d987
    • David Howells's avatar
      KEYS: Disallow keyrings beginning with '.' to be joined as session keyrings · b5737b92
      David Howells authored
      commit ee8f844e upstream.
      
      This fixes CVE-2016-9604.
      
      Keyrings whose name begin with a '.' are special internal keyrings and so
      userspace isn't allowed to create keyrings by this name to prevent
      shadowing.  However, the patch that added the guard didn't fix
      KEYCTL_JOIN_SESSION_KEYRING.  Not only can that create dot-named keyrings,
      it can also subscribe to them as a session keyring if they grant SEARCH
      permission to the user.
      
      This, for example, allows a root process to set .builtin_trusted_keys as
      its session keyring, at which point it has full access because now the
      possessor permissions are added.  This permits root to add extra public
      keys, thereby bypassing module verification.
      
      This also affects kexec and IMA.
      
      This can be tested by (as root):
      
      	keyctl session .builtin_trusted_keys
      	keyctl add user a a @s
      	keyctl list @s
      
      which on my test box gives me:
      
      	2 keys in keyring:
      	180010936: ---lswrv     0     0 asymmetric: Build time autogenerated kernel key: ae3d4a31b82daa8e1a75b49dc2bba949fd992a05
      	801382539: --alswrv     0     0 user: a
      
      
      Fix this by rejecting names beginning with a '.' in the keyctl.
      Signed-off-by: default avatarDavid Howells <dhowells@redhat.com>
      Acked-by: default avatarMimi Zohar <zohar@linux.vnet.ibm.com>
      cc: linux-ima-devel@lists.sourceforge.net
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b5737b92
  2. 21 Apr, 2017 34 commits
    • Greg Kroah-Hartman's avatar
      Linux 4.4.63 · 81af21fe
      Greg Kroah-Hartman authored
      81af21fe
    • Greg Kroah-Hartman's avatar
      MIPS: fix Select HAVE_IRQ_EXIT_ON_IRQ_STACK patch. · d0055797
      Greg Kroah-Hartman authored
      Commit f017e58d which was commit
      3cc3434f upstream, was misapplied to the
      4.4 stable kernel.
      
      This patch fixes this and moves the chunk to the proper Kconfig area.
      Reported-by: default avatar"Maciej W. Rozycki" <macro@linux-mips.org>
      Cc: Matt Redfearn <matt.redfearn@imgtec.com>
      Cc: Jason A. Donenfeld <jason@zx2c4.com>
      Cc: Thomas Gleixner <tglx@linutronix.de>
      Cc: Ralf Baechle <ralf@linux-mips.org>
      Cc: Amit Pundir <amit.pundir@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      d0055797
    • Marcelo Ricardo Leitner's avatar
      sctp: deny peeloff operation on asocs with threads sleeping on it · e2f5fb92
      Marcelo Ricardo Leitner authored
      commit dfcb9f4f upstream.
      
      commit 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
      attempted to avoid a BUG_ON call when the association being used for a
      sendmsg() is blocked waiting for more sndbuf and another thread did a
      peeloff operation on such asoc, moving it to another socket.
      
      As Ben Hutchings noticed, then in such case it would return without
      locking back the socket and would cause two unlocks in a row.
      
      Further analysis also revealed that it could allow a double free if the
      application managed to peeloff the asoc that is created during the
      sendmsg call, because then sctp_sendmsg() would try to free the asoc
      that was created only for that call.
      
      This patch takes another approach. It will deny the peeloff operation
      if there is a thread sleeping on the asoc, so this situation doesn't
      exist anymore. This avoids the issues described above and also honors
      the syscalls that are already being handled (it can be multiple sendmsg
      calls).
      
      Joint work with Xin Long.
      
      Fixes: 2dcab598 ("sctp: avoid BUG_ON on sctp_wait_for_sndbuf")
      Cc: Alexander Popov <alex.popov@linux.com>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Signed-off-by: default avatarXin Long <lucien.xin@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      e2f5fb92
    • Mantas M's avatar
      net: ipv6: check route protocol when deleting routes · f00f18eb
      Mantas M authored
      commit c2ed1880 upstream.
      
      The protocol field is checked when deleting IPv4 routes, but ignored for
      IPv6, which causes problems with routing daemons accidentally deleting
      externally set routes (observed by multiple bird6 users).
      
      This can be verified using `ip -6 route del <prefix> proto something`.
      Signed-off-by: default avatarMantas Mikulėnas <grawity@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      f00f18eb
    • Richard Genoud's avatar
      tty/serial: atmel: RS485 half duplex w/DMA: enable RX after TX is done · 990a142e
      Richard Genoud authored
      commit b389f173 upstream.
      
      When using RS485 in half duplex, RX should be enabled when TX is
      finished, and stopped when TX starts.
      
      Before commit 0058f087 ("tty/serial: atmel: fix RS485 half
      duplex with DMA"), RX was not disabled in atmel_start_tx() if the DMA
      was used. So, collisions could happened.
      
      But disabling RX in atmel_start_tx() uncovered another bug:
      RX was enabled again in the wrong place (in atmel_tx_dma) instead of
      being enabled when TX is finished (in atmel_complete_tx_dma), so the
      transmission simply stopped.
      
      This bug was not triggered before commit 0058f087
      ("tty/serial: atmel: fix RS485 half duplex with DMA") because RX was
      never disabled before.
      
      Moving atmel_start_rx() in atmel_complete_tx_dma() corrects the problem.
      Reported-by: default avatarGil Weber <webergil@gmail.com>
      Fixes: 0058f087Tested-by: default avatarGil Weber <webergil@gmail.com>
      Signed-off-by: default avatarRichard Genoud <richard.genoud@gmail.com>
      Acked-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      Tested-by: default avatarBryan Evenson <bevenson@melinkcorp.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      990a142e
    • NeilBrown's avatar
      SUNRPC: fix refcounting problems with auth_gss messages. · 8dc821b9
      NeilBrown authored
      commit 1cded9d2 upstream.
      
      There are two problems with refcounting of auth_gss messages.
      
      First, the reference on the pipe->pipe list (taken by a call
      to rpc_queue_upcall()) is not counted.  It seems to be
      assumed that a message in pipe->pipe will always also be in
      pipe->in_downcall, where it is correctly reference counted.
      
      However there is no guaranty of this.  I have a report of a
      NULL dereferences in rpc_pipe_read() which suggests a msg
      that has been freed is still on the pipe->pipe list.
      
      One way I imagine this might happen is:
      - message is queued for uid=U and auth->service=S1
      - rpc.gssd reads this message and starts processing.
        This removes the message from pipe->pipe
      - message is queued for uid=U and auth->service=S2
      - rpc.gssd replies to the first message. gss_pipe_downcall()
        calls __gss_find_upcall(pipe, U, NULL) and it finds the
        *second* message, as new messages are placed at the head
        of ->in_downcall, and the service type is not checked.
      - This second message is removed from ->in_downcall and freed
        by gss_release_msg() (even though it is still on pipe->pipe)
      - rpc.gssd tries to read another message, and dereferences a pointer
        to this message that has just been freed.
      
      I fix this by incrementing the reference count before calling
      rpc_queue_upcall(), and decrementing it if that fails, or normally in
      gss_pipe_destroy_msg().
      
      It seems strange that the reply doesn't target the message more
      precisely, but I don't know all the details.  In any case, I think the
      reference counting irregularity became a measureable bug when the
      extra arg was added to __gss_find_upcall(), hence the Fixes: line
      below.
      
      The second problem is that if rpc_queue_upcall() fails, the new
      message is not freed. gss_alloc_msg() set the ->count to 1,
      gss_add_msg() increments this to 2, gss_unhash_msg() decrements to 1,
      then the pointer is discarded so the memory never gets freed.
      
      Fixes: 9130b8db ("SUNRPC: allow for upcalls for same uid but different gss service")
      Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1011250Signed-off-by: default avatarNeilBrown <neilb@suse.com>
      Signed-off-by: default avatarTrond Myklebust <trond.myklebust@primarydata.com>
      Signed-off-by: default avatarSumit Semwal <sumit.semwal@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      8dc821b9
    • Thomas Falcon's avatar
      ibmveth: calculate gso_segs for large packets · 403a728d
      Thomas Falcon authored
      commit 94acf164 upstream.
      
      Include calculations to compute the number of segments
      that comprise an aggregated large packet.
      Signed-off-by: default avatarThomas Falcon <tlfalcon@linux.vnet.ibm.com>
      Reviewed-by: default avatarMarcelo Ricardo Leitner <marcelo.leitner@gmail.com>
      Reviewed-by: default avatarJonathan Maxwell <jmaxwell37@gmail.com>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Signed-off-by: default avatarSumit Semwal <sumit.semwal@linaro.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      403a728d
    • Ben Hutchings's avatar
      catc: Use heap buffer for memory size test · 65596042
      Ben Hutchings authored
      commit 2d6a0e9d upstream.
      
      Allocating USB buffers on the stack is not portable, and no longer
      works on x86_64 (with VMAP_STACK enabled as per default).
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Brad Spengler <spender@grsecurity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      65596042
    • Ben Hutchings's avatar
      40531b26
    • Ben Hutchings's avatar
      rtl8150: Use heap buffers for all register access · a90604be
      Ben Hutchings authored
      commit 7926aff5 upstream.
      
      Allocating USB buffers on the stack is not portable, and no longer
      works on x86_64 (with VMAP_STACK enabled as per default).
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Brad Spengler <spender@grsecurity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a90604be
    • Ben Hutchings's avatar
      pegasus: Use heap buffers for all register access · be570e55
      Ben Hutchings authored
      commit 5593523f upstream.
      
      Allocating USB buffers on the stack is not portable, and no longer
      works on x86_64 (with VMAP_STACK enabled as per default).
      
      Fixes: 1da177e4 ("Linux-2.6.12-rc2")
      References: https://bugs.debian.org/852556Reported-by: default avatarLisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
      Tested-by: default avatarLisandro Damián Nicanor Pérez Meyer <lisandro@debian.org>
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      Cc: Brad Spengler <spender@grsecurity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      be570e55
    • Omar Sandoval's avatar
      virtio-console: avoid DMA from stack · eb526765
      Omar Sandoval authored
      commit c4baad50 upstream.
      
      put_chars() stuffs the buffer it gets into an sg, but that buffer may be
      on the stack. This breaks with CONFIG_VMAP_STACK=y (for me, it
      manifested as printks getting turned into NUL bytes).
      Signed-off-by: default avatarOmar Sandoval <osandov@fb.com>
      Signed-off-by: default avatarMichael S. Tsirkin <mst@redhat.com>
      Reviewed-by: default avatarAmit Shah <amit.shah@redhat.com>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Brad Spengler <spender@grsecurity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      eb526765
    • Stefan Brüns's avatar
      dvb-usb-firmware: don't do DMA on stack · 6be431f9
      Stefan Brüns authored
      commit 67b0503d upstream.
      
      The buffer allocation for the firmware data was changed in
      commit 43fab979 ("[media] dvb-usb: don't use stack for firmware load")
      but the same applies for the reset value.
      
      Fixes: 43fab979 ("[media] dvb-usb: don't use stack for firmware load")
      Signed-off-by: default avatarStefan Brüns <stefan.bruens@rwth-aachen.de>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Cc: Brad Spengler <spender@grsecurity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6be431f9
    • Mauro Carvalho Chehab's avatar
      dvb-usb: don't use stack for firmware load · 50215745
      Mauro Carvalho Chehab authored
      commit 43fab979 upstream.
      
      As reported by Marc Duponcheel <marc@offline.be>, firmware load on
      dvb-usb is using the stack, with is not allowed anymore on default
      Kernel configurations:
      
      [ 1025.958836] dvb-usb: found a 'WideView WT-220U PenType Receiver (based on ZL353)' in cold state, will try to load a firmware
      [ 1025.958853] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw'
      [ 1025.958855] dvb-usb: could not stop the USB controller CPU.
      [ 1025.958856] dvb-usb: error while transferring firmware (transferred size: -11, block size: 3)
      [ 1025.958856] dvb-usb: firmware download failed at 8 with -22
      [ 1025.958867] usbcore: registered new interface driver dvb_usb_dtt200u
      
      [    2.789902] dvb-usb: downloading firmware from file 'dvb-usb-wt220u-zl0353-01.fw'
      [    2.789905] ------------[ cut here ]------------
      [    2.789911] WARNING: CPU: 3 PID: 2196 at drivers/usb/core/hcd.c:1584 usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore]
      [    2.789912] transfer buffer not dma capable
      [    2.789912] Modules linked in: btusb dvb_usb_dtt200u(+) dvb_usb_af9035(+) btrtl btbcm dvb_usb dvb_usb_v2 btintel dvb_core bluetooth rc_core rfkill x86_pkg_temp_thermal intel_powerclamp coretemp crc32_pclmul aesni_intel aes_x86_64 glue_helper lrw gf128mul ablk_helper cryptd drm_kms_helper syscopyarea sysfillrect pcspkr i2c_i801 sysimgblt fb_sys_fops drm i2c_smbus i2c_core r8169 lpc_ich mfd_core mii thermal fan rtc_cmos video button acpi_cpufreq processor snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_pcm snd_timer snd crc32c_intel ahci libahci libata xhci_pci ehci_pci xhci_hcd ehci_hcd usbcore usb_common dm_mirror dm_region_hash dm_log dm_mod
      [    2.789936] CPU: 3 PID: 2196 Comm: systemd-udevd Not tainted 4.9.0-gentoo #1
      [    2.789937] Hardware name: ASUS All Series/H81I-PLUS, BIOS 0401 07/23/2013
      [    2.789938]  ffffc9000339b690 ffffffff812bd397 ffffc9000339b6e0 0000000000000000
      [    2.789939]  ffffc9000339b6d0 ffffffff81055c86 000006300339b6a0 ffff880116c0c000
      [    2.789941]  0000000000000000 0000000000000000 0000000000000001 ffff880116c08000
      [    2.789942] Call Trace:
      [    2.789945]  [<ffffffff812bd397>] dump_stack+0x4d/0x66
      [    2.789947]  [<ffffffff81055c86>] __warn+0xc6/0xe0
      [    2.789948]  [<ffffffff81055cea>] warn_slowpath_fmt+0x4a/0x50
      [    2.789952]  [<ffffffffa006d460>] usb_hcd_map_urb_for_dma+0x430/0x560 [usbcore]
      [    2.789954]  [<ffffffff814ed5a8>] ? io_schedule_timeout+0xd8/0x110
      [    2.789956]  [<ffffffffa006e09c>] usb_hcd_submit_urb+0x9c/0x980 [usbcore]
      [    2.789958]  [<ffffffff812d0ebf>] ? copy_page_to_iter+0x14f/0x2b0
      [    2.789960]  [<ffffffff81126818>] ? pagecache_get_page+0x28/0x240
      [    2.789962]  [<ffffffff8118c2a0>] ? touch_atime+0x20/0xa0
      [    2.789964]  [<ffffffffa006f7c4>] usb_submit_urb+0x2c4/0x520 [usbcore]
      [    2.789967]  [<ffffffffa006feca>] usb_start_wait_urb+0x5a/0xe0 [usbcore]
      [    2.789969]  [<ffffffffa007000c>] usb_control_msg+0xbc/0xf0 [usbcore]
      [    2.789970]  [<ffffffffa067903d>] usb_cypress_writemem+0x3d/0x40 [dvb_usb]
      [    2.789972]  [<ffffffffa06791cf>] usb_cypress_load_firmware+0x4f/0x130 [dvb_usb]
      [    2.789973]  [<ffffffff8109dbbe>] ? console_unlock+0x2fe/0x5d0
      [    2.789974]  [<ffffffff8109e10c>] ? vprintk_emit+0x27c/0x410
      [    2.789975]  [<ffffffff8109e40a>] ? vprintk_default+0x1a/0x20
      [    2.789976]  [<ffffffff81124d76>] ? printk+0x43/0x4b
      [    2.789977]  [<ffffffffa0679310>] dvb_usb_download_firmware+0x60/0xd0 [dvb_usb]
      [    2.789979]  [<ffffffffa0679898>] dvb_usb_device_init+0x3d8/0x610 [dvb_usb]
      [    2.789981]  [<ffffffffa069e302>] dtt200u_usb_probe+0x92/0xd0 [dvb_usb_dtt200u]
      [    2.789984]  [<ffffffffa007420c>] usb_probe_interface+0xfc/0x270 [usbcore]
      [    2.789985]  [<ffffffff8138bf95>] driver_probe_device+0x215/0x2d0
      [    2.789986]  [<ffffffff8138c0e6>] __driver_attach+0x96/0xa0
      [    2.789987]  [<ffffffff8138c050>] ? driver_probe_device+0x2d0/0x2d0
      [    2.789988]  [<ffffffff81389ffb>] bus_for_each_dev+0x5b/0x90
      [    2.789989]  [<ffffffff8138b7b9>] driver_attach+0x19/0x20
      [    2.789990]  [<ffffffff8138b33c>] bus_add_driver+0x11c/0x220
      [    2.789991]  [<ffffffff8138c91b>] driver_register+0x5b/0xd0
      [    2.789994]  [<ffffffffa0072f6c>] usb_register_driver+0x7c/0x130 [usbcore]
      [    2.789994]  [<ffffffffa06a5000>] ? 0xffffffffa06a5000
      [    2.789996]  [<ffffffffa06a501e>] dtt200u_usb_driver_init+0x1e/0x20 [dvb_usb_dtt200u]
      [    2.789997]  [<ffffffff81000408>] do_one_initcall+0x38/0x140
      [    2.789998]  [<ffffffff8116001c>] ? __vunmap+0x7c/0xc0
      [    2.789999]  [<ffffffff81124fb0>] ? do_init_module+0x22/0x1d2
      [    2.790000]  [<ffffffff81124fe8>] do_init_module+0x5a/0x1d2
      [    2.790002]  [<ffffffff810c96b1>] load_module+0x1e11/0x2580
      [    2.790003]  [<ffffffff810c68b0>] ? show_taint+0x30/0x30
      [    2.790004]  [<ffffffff81177250>] ? kernel_read_file+0x100/0x190
      [    2.790005]  [<ffffffff810c9ffa>] SyS_finit_module+0xba/0xc0
      [    2.790007]  [<ffffffff814f13e0>] entry_SYSCALL_64_fastpath+0x13/0x94
      [    2.790008] ---[ end trace c78a74e78baec6fc ]---
      
      So, allocate the structure dynamically.
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
      [bwh: Backported to 4.9: adjust context]
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      50215745
    • Kees Cook's avatar
      mm: Tighten x86 /dev/mem with zeroing reads · 6739cc12
      Kees Cook authored
      commit a4866aa8 upstream.
      
      Under CONFIG_STRICT_DEVMEM, reading System RAM through /dev/mem is
      disallowed. However, on x86, the first 1MB was always allowed for BIOS
      and similar things, regardless of it actually being System RAM. It was
      possible for heap to end up getting allocated in low 1MB RAM, and then
      read by things like x86info or dd, which would trip hardened usercopy:
      
      usercopy: kernel memory exposure attempt detected from ffff880000090000 (dma-kmalloc-256) (4096 bytes)
      
      This changes the x86 exception for the low 1MB by reading back zeros for
      System RAM areas instead of blindly allowing them. More work is needed to
      extend this to mmap, but currently mmap doesn't go through usercopy, so
      hardened usercopy won't Oops the kernel.
      Reported-by: default avatarTommi Rantala <tommi.t.rantala@nokia.com>
      Tested-by: default avatarTommi Rantala <tommi.t.rantala@nokia.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      Cc: Brad Spengler <spender@grsecurity.net>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6739cc12
    • Thierry Reding's avatar
      rtc: tegra: Implement clock handling · ba027813
      Thierry Reding authored
      commit 5fa40869 upstream.
      
      Accessing the registers of the RTC block on Tegra requires the module
      clock to be enabled. This only works because the RTC module clock will
      be enabled by default during early boot. However, because the clock is
      unused, the CCF will disable it at late_init time. This causes the RTC
      to become unusable afterwards. This can easily be reproduced by trying
      to use the RTC:
      
      	$ hwclock --rtc /dev/rtc1
      
      This will hang the system. I ran into this by following up on a report
      by Martin Michlmayr that reboot wasn't working on Tegra210 systems. It
      turns out that the rtc-tegra driver's ->shutdown() implementation will
      hang the CPU, because of the disabled clock, before the system can be
      rebooted.
      
      What confused me for a while is that the same driver is used on prior
      Tegra generations where the hang can not be observed. However, as Peter
      De Schrijver pointed out, this is because on 32-bit Tegra chips the RTC
      clock is enabled by the tegra20_timer.c clocksource driver, which uses
      the RTC to provide a persistent clock. This code is never enabled on
      64-bit Tegra because the persistent clock infrastructure does not exist
      on 64-bit ARM.
      
      The proper fix for this is to add proper clock handling to the RTC
      driver in order to ensure that the clock is enabled when the driver
      requires it. All device trees contain the clock already, therefore
      no additional changes are required.
      Reported-by: default avatarMartin Michlmayr <tbm@cyrius.com>
      Acked-By Peter De Schrijver <pdeschrijver@nvidia.com>
      Signed-off-by: default avatarThierry Reding <treding@nvidia.com>
      Signed-off-by: default avatarAlexandre Belloni <alexandre.belloni@free-electrons.com>
      [bwh: Backported to 4.9: adjust context]
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ba027813
    • Lee, Chun-Yi's avatar
      platform/x86: acer-wmi: setup accelerometer when machine has appropriate notify event · ccf0904c
      Lee, Chun-Yi authored
      commit 98d610c3 upstream.
      
      The accelerometer event relies on the ACERWMID_EVENT_GUID notify.
      So, this patch changes the codes to setup accelerometer input device
      when detected ACERWMID_EVENT_GUID. It avoids that the accel input
      device created on every Acer machines.
      
      In addition, patch adds a clearly parsing logic of accelerometer hid
      to acer_wmi_get_handle_cb callback function. It is positive matching
      the "SENR" name with "BST0001" device to avoid non-supported hardware.
      Reported-by: default avatarBjørn Mork <bjorn@mork.no>
      Cc: Darren Hart <dvhart@infradead.org>
      Signed-off-by: default avatarLee, Chun-Yi <jlee@suse.com>
      [andy: slightly massage commit message]
      Signed-off-by: default avatarAndy Shevchenko <andriy.shevchenko@linux.intel.com>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ccf0904c
    • Daeho Jeong's avatar
      ext4: fix inode checksum calculation problem if i_extra_size is small · 51f8d95c
      Daeho Jeong authored
      commit 05ac5aa1 upstream.
      
      We've fixed the race condition problem in calculating ext4 checksum
      value in commit b47820ed ("ext4: avoid modifying checksum fields
      directly during checksum veficationon"). However, by this change,
      when calculating the checksum value of inode whose i_extra_size is
      less than 4, we couldn't calculate the checksum value in a proper way.
      This problem was found and reported by Nix, Thank you.
      Reported-by: default avatarNix <nix@esperi.org.uk>
      Signed-off-by: default avatarDaeho Jeong <daeho.jeong@samsung.com>
      Signed-off-by: default avatarYoungjin Gil <youngjin.gil@samsung.com>
      Signed-off-by: default avatarDarrick J. Wong <darrick.wong@oracle.com>
      Signed-off-by: default avatarTheodore Ts'o <tytso@mit.edu>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      51f8d95c
    • Arnd Bergmann's avatar
      dvb-usb-v2: avoid use-after-free · 0cb03b6e
      Arnd Bergmann authored
      commit 00514537 upstream.
      
      I ran into a stack frame size warning because of the on-stack copy of
      the USB device structure:
      
      drivers/media/usb/dvb-usb-v2/dvb_usb_core.c: In function 'dvb_usbv2_disconnect':
      drivers/media/usb/dvb-usb-v2/dvb_usb_core.c:1029:1: error: the frame size of 1104 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
      
      Copying a device structure like this is wrong for a number of other reasons
      too aside from the possible stack overflow. One of them is that the
      dev_info() call will print the name of the device later, but AFAICT
      we have only copied a pointer to the name earlier and the actual name
      has been freed by the time it gets printed.
      
      This removes the on-stack copy of the device and instead copies the
      device name using kstrdup(). I'm ignoring the possible failure here
      as both printk() and kfree() are able to deal with NULL pointers.
      Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@s-opensource.com>
      Cc: Ben Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0cb03b6e
    • Miaoqing Pan's avatar
      ath9k: fix NULL pointer dereference · ea6d8d67
      Miaoqing Pan authored
      commit 40bea976 upstream.
      
      relay_open() may return NULL, check the return value to avoid the crash.
      
      BUG: unable to handle kernel NULL pointer dereference at 0000000000000040
      IP: [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common]
      PGD 41cf28067 PUD 41be92067 PMD 0
      Oops: 0000 [#1] SMP
      CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.6+ #35
      Hardware name: Hewlett-Packard h8-1080t/2A86, BIOS 6.15    07/04/2011
      task: ffffffff81e0c4c0 task.stack: ffffffff81e00000
      RIP: 0010:[<ffffffffa01a95c5>] [<ffffffffa01a95c5>] ath_cmn_process_fft+0xd5/0x700 [ath9k_common]
      RSP: 0018:ffff88041f203ca0 EFLAGS: 00010293
      RAX: 0000000000000000 RBX: 000000000000059f RCX: 0000000000000000
      RDX: 0000000000000000 RSI: 0000000000000040 RDI: ffffffff81f0ca98
      RBP: ffff88041f203dc8 R08: ffffffffffffffff R09: 00000000000000ff
      R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
      R13: ffffffff81f0ca98 R14: 0000000000000000 R15: 0000000000000000
      FS:  0000000000000000(0000) GS:ffff88041f200000(0000) knlGS:0000000000000000
      CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
      CR2: 0000000000000040 CR3: 000000041b6ec000 CR4: 00000000000006f0
      Stack:
      0000000000000363 00000000000003f3 00000000000003f3 00000000000001f9
      000000000000049a 0000000001252c04 ffff88041f203e44 ffff880417b4bfd0
      0000000000000008 ffff88041785b9c0 0000000000000002 ffff88041613dc60
      
      Call Trace:
      <IRQ>
      [<ffffffffa01b6441>] ath9k_tasklet+0x1b1/0x220 [ath9k]
      [<ffffffff8105d8dd>] tasklet_action+0x4d/0xf0
      [<ffffffff8105dde2>] __do_softirq+0x92/0x2a0
      Reported-by: default avatarDevin Tuchsen <devin.tuchsen@gmail.com>
      Tested-by: default avatarDevin Tuchsen <devin.tuchsen@gmail.com>
      Signed-off-by: default avatarMiaoqing Pan <miaoqing@codeaurora.org>
      Signed-off-by: default avatarKalle Valo <kvalo@qca.qualcomm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      ea6d8d67
    • Herbert Xu's avatar
      crypto: ahash - Fix EINPROGRESS notification callback · 2673d1c5
      Herbert Xu authored
      commit ef0579b6 upstream.
      
      The ahash API modifies the request's callback function in order
      to clean up after itself in some corner cases (unaligned final
      and missing finup).
      
      When the request is complete ahash will restore the original
      callback and everything is fine.  However, when the request gets
      an EBUSY on a full queue, an EINPROGRESS callback is made while
      the request is still ongoing.
      
      In this case the ahash API will incorrectly call its own callback.
      
      This patch fixes the problem by creating a temporary request
      object on the stack which is used to relay EINPROGRESS back to
      the original completion function.
      
      This patch also adds code to preserve the original flags value.
      
      Fixes: ab6bf4e5 ("crypto: hash - Fix the pointer voodoo in...")
      Reported-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Tested-by: default avatarSabrina Dubroca <sd@queasysnail.net>
      Signed-off-by: default avatarHerbert Xu <herbert@gondor.apana.org.au>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      2673d1c5
    • Benjamin Herrenschmidt's avatar
      powerpc: Disable HFSCR[TM] if TM is not supported · 70e55aaf
      Benjamin Herrenschmidt authored
      commit 7ed23e1b upstream.
      
      On Power8 & Power9 the early CPU inititialisation in __init_HFSCR()
      turns on HFSCR[TM] (Hypervisor Facility Status and Control Register
      [Transactional Memory]), but that doesn't take into account that TM
      might be disabled by CPU features, or disabled by the kernel being built
      with CONFIG_PPC_TRANSACTIONAL_MEM=n.
      
      So later in boot, when we have setup the CPU features, clear HSCR[TM] if
      the TM CPU feature has been disabled. We use CPU_FTR_TM_COMP to account
      for the CONFIG_PPC_TRANSACTIONAL_MEM=n case.
      
      Without this a KVM guest might try use TM, even if told not to, and
      cause an oops in the host kernel. Typically the oops is seen in
      __kvmppc_vcore_entry() and may or may not be fatal to the host, but is
      always bad news.
      
      In practice all shipping CPU revisions do support TM, and all host
      kernels we are aware of build with TM support enabled, so no one should
      actually be able to hit this in the wild.
      
      Fixes: 2a3563b0 ("powerpc: Setup in HFSCR for POWER8")
      Cc: stable@vger.kernel.org # v3.10+
      Signed-off-by: default avatarBenjamin Herrenschmidt <benh@kernel.crashing.org>
      Tested-by: default avatarSam Bobroff <sam.bobroff@au1.ibm.com>
      [mpe: Rewrite change log with input from Sam, add Fixes/stable]
      Signed-off-by: default avatarMichael Ellerman <mpe@ellerman.id.au>
      [sb: Backported to linux-4.4.y: adjusted context]
      Signed-off-by: default avatarSam Bobroff <sam.bobroff@au1.ibm.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      70e55aaf
    • Minchan Kim's avatar
      zram: do not use copy_page with non-page aligned address · 9286385a
      Minchan Kim authored
      commit d72e9a7a upstream.
      
      The copy_page is optimized memcpy for page-alinged address.  If it is
      used with non-page aligned address, it can corrupt memory which means
      system corruption.  With zram, it can happen with
      
      1. 64K architecture
      2. partial IO
      3. slub debug
      
      Partial IO need to allocate a page and zram allocates it via kmalloc.
      With slub debug, kmalloc(PAGE_SIZE) doesn't return page-size aligned
      address.  And finally, copy_page(mem, cmem) corrupts memory.
      
      So, this patch changes it to memcpy.
      
      Actuaully, we don't need to change zram_bvec_write part because zsmalloc
      returns page-aligned address in case of PAGE_SIZE class but it's not
      good to rely on the internal of zsmalloc.
      
      Note:
       When this patch is merged to stable, clear_page should be fixed, too.
       Unfortunately, recent zram removes it by "same page merge" feature so
       it's hard to backport this patch to -stable tree.
      
      I will handle it when I receive the mail from stable tree maintainer to
      merge this patch to backport.
      
      Fixes: 42e99bd9 ("zram: optimize memory operations with clear_page()/copy_page()")
      Link: http://lkml.kernel.org/r/1492042622-12074-2-git-send-email-minchan@kernel.orgSigned-off-by: default avatarMinchan Kim <minchan@kernel.org>
      Cc: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
      Signed-off-by: default avatarAndrew Morton <akpm@linux-foundation.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      
      9286385a
    • Paolo Bonzini's avatar
      kvm: fix page struct leak in handle_vmon · c1fc1d2f
      Paolo Bonzini authored
      commit 06ce521a upstream.
      
      handle_vmon gets a reference on VMXON region page,
      but does not release it. Release the reference.
      
      Found by syzkaller; based on a patch by Dmitry.
      Reported-by: default avatarDmitry Vyukov <dvyukov@google.com>
      Signed-off-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
      [bwh: Backported to 3.16: use skip_emulated_instruction()]
      Signed-off-by: default avatarBen Hutchings <ben@decadent.org.uk>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c1fc1d2f
    • Greg Kroah-Hartman's avatar
      Revert "MIPS: Lantiq: Fix cascaded IRQ setup" · 98c953a0
      Greg Kroah-Hartman authored
      This reverts commit 6280ac93 which is
      commit 6c356eda upstream.
      
      It shouldn't have been included in a stable release.
      Reported-by: default avatarAmit Pundir <amit.pundir@linaro.org>
      Cc: Felix Fietkau <nbd@nbd.name>
      Cc: John Crispin <john@phrozen.org>
      Cc: James Hogan <james.hogan@imgtec.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      98c953a0
    • Max Bires's avatar
      char: lack of bool string made CONFIG_DEVPORT always on · a32c5331
      Max Bires authored
      commit f2cfa58b upstream.
      
      Without a bool string present, using "# CONFIG_DEVPORT is not set" in
      defconfig files would not actually unset devport. This esnured that
      /dev/port was always on, but there are reasons a user may wish to
      disable it (smaller kernel, attack surface reduction) if it's not being
      used. Adding a message here in order to make this user visible.
      Signed-off-by: default avatarMax Bires <jbires@google.com>
      Acked-by: default avatarArnd Bergmann <arnd@arndb.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      a32c5331
    • Geert Uytterhoeven's avatar
      char: Drop bogus dependency of DEVPORT on !M68K · 0a6aa0d1
      Geert Uytterhoeven authored
      commit 309124e2 upstream.
      
      According to full-history-linux commit d3794f4fa7c3edc3 ("[PATCH] M68k
      update (part 25)"), port operations are allowed on m68k if CONFIG_ISA is
      defined.
      
      However, commit 153dcc54 ("[PATCH] mem driver: fix conditional
      on isa i/o support") accidentally changed an "||" into an "&&",
      disabling it completely on m68k. This logic was retained when
      introducing the DEVPORT symbol in commit 4f911d64 ("Make
      /dev/port conditional on config symbol").
      
      Drop the bogus dependency on !M68K to fix this.
      
      Fixes: 153dcc54 ("[PATCH] mem driver: fix conditional on isa i/o support")
      Signed-off-by: default avatarGeert Uytterhoeven <geert@linux-m68k.org>
      Tested-by: default avatarAl Stone <ahs3@redhat.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      0a6aa0d1
    • Steven Rostedt (VMware)'s avatar
      ftrace: Fix removing of second function probe · 7fe57118
      Steven Rostedt (VMware) authored
      commit 82cc4fc2 upstream.
      
      When two function probes are added to set_ftrace_filter, and then one of
      them is removed, the update to the function locations is not performed, and
      the record keeping of the function states are corrupted, and causes an
      ftrace_bug() to occur.
      
      This is easily reproducable by adding two probes, removing one, and then
      adding it back again.
      
       # cd /sys/kernel/debug/tracing
       # echo schedule:traceoff > set_ftrace_filter
       # echo do_IRQ:traceoff > set_ftrace_filter
       # echo \!do_IRQ:traceoff > /debug/tracing/set_ftrace_filter
       # echo do_IRQ:traceoff > set_ftrace_filter
      
      Causes:
       ------------[ cut here ]------------
       WARNING: CPU: 2 PID: 1098 at kernel/trace/ftrace.c:2369 ftrace_get_addr_curr+0x143/0x220
       Modules linked in: [...]
       CPU: 2 PID: 1098 Comm: bash Not tainted 4.10.0-test+ #405
       Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v02.05 05/07/2012
       Call Trace:
        dump_stack+0x68/0x9f
        __warn+0x111/0x130
        ? trace_irq_work_interrupt+0xa0/0xa0
        warn_slowpath_null+0x1d/0x20
        ftrace_get_addr_curr+0x143/0x220
        ? __fentry__+0x10/0x10
        ftrace_replace_code+0xe3/0x4f0
        ? ftrace_int3_handler+0x90/0x90
        ? printk+0x99/0xb5
        ? 0xffffffff81000000
        ftrace_modify_all_code+0x97/0x110
        arch_ftrace_update_code+0x10/0x20
        ftrace_run_update_code+0x1c/0x60
        ftrace_run_modify_code.isra.48.constprop.62+0x8e/0xd0
        register_ftrace_function_probe+0x4b6/0x590
        ? ftrace_startup+0x310/0x310
        ? debug_lockdep_rcu_enabled.part.4+0x1a/0x30
        ? update_stack_state+0x88/0x110
        ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
        ? preempt_count_sub+0x18/0xd0
        ? mutex_lock_nested+0x104/0x800
        ? ftrace_regex_write.isra.43.part.44+0x1d3/0x320
        ? __unwind_start+0x1c0/0x1c0
        ? _mutex_lock_nest_lock+0x800/0x800
        ftrace_trace_probe_callback.isra.3+0xc0/0x130
        ? func_set_flag+0xe0/0xe0
        ? __lock_acquire+0x642/0x1790
        ? __might_fault+0x1e/0x20
        ? trace_get_user+0x398/0x470
        ? strcmp+0x35/0x60
        ftrace_trace_onoff_callback+0x48/0x70
        ftrace_regex_write.isra.43.part.44+0x251/0x320
        ? match_records+0x420/0x420
        ftrace_filter_write+0x2b/0x30
        __vfs_write+0xd7/0x330
        ? do_loop_readv_writev+0x120/0x120
        ? locks_remove_posix+0x90/0x2f0
        ? do_lock_file_wait+0x160/0x160
        ? __lock_is_held+0x93/0x100
        ? rcu_read_lock_sched_held+0x5c/0xb0
        ? preempt_count_sub+0x18/0xd0
        ? __sb_start_write+0x10a/0x230
        ? vfs_write+0x222/0x240
        vfs_write+0xef/0x240
        SyS_write+0xab/0x130
        ? SyS_read+0x130/0x130
        ? trace_hardirqs_on_caller+0x182/0x280
        ? trace_hardirqs_on_thunk+0x1a/0x1c
        entry_SYSCALL_64_fastpath+0x18/0xad
       RIP: 0033:0x7fe61c157c30
       RSP: 002b:00007ffe87890258 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
       RAX: ffffffffffffffda RBX: ffffffff8114a410 RCX: 00007fe61c157c30
       RDX: 0000000000000010 RSI: 000055814798f5e0 RDI: 0000000000000001
       RBP: ffff8800c9027f98 R08: 00007fe61c422740 R09: 00007fe61ca53700
       R10: 0000000000000073 R11: 0000000000000246 R12: 0000558147a36400
       R13: 00007ffe8788f160 R14: 0000000000000024 R15: 00007ffe8788f15c
        ? trace_hardirqs_off_caller+0xc0/0x110
       ---[ end trace 99fa09b3d9869c2c ]---
       Bad trampoline accounting at: ffffffff81cc3b00 (do_IRQ+0x0/0x150)
      
      Fixes: 59df055f ("ftrace: trace different functions with a different tracer")
      Signed-off-by: default avatarSteven Rostedt (VMware) <rostedt@goodmis.org>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      7fe57118
    • Tyler Baker's avatar
      irqchip/irq-imx-gpcv2: Fix spinlock initialization · c51451e4
      Tyler Baker authored
      commit 75eb5e1e upstream.
      
      The raw_spinlock in the IMX GPCV2 interupt chip is not initialized before
      usage. That results in a lockdep splat:
      
        INFO: trying to register non-static key.
        the code is fine but needs lockdep annotation.
        turning off the locking correctness validator.
      
      Add the missing raw_spin_lock_init() to the setup code.
      
      Fixes: e324c4dc ("irqchip/imx-gpcv2: IMX GPCv2 driver for wakeup sources")
      Signed-off-by: default avatarTyler Baker <tyler.baker@linaro.org>
      Reviewed-by: default avatarFabio Estevam <fabio.estevam@nxp.com>
      Cc: jason@lakedaemon.net
      Cc: marc.zyngier@arm.com
      Cc: shawnguo@kernel.org
      Cc: andrew.smirnov@gmail.com
      Cc: linux-arm-kernel@lists.infradead.org
      Link: http://lkml.kernel.org/r/20170413222731.5917-1-tyler.baker@linaro.orgSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      c51451e4
    • Dan Williams's avatar
      libnvdimm: fix reconfig_mutex, mmap_sem, and jbd2_handle lockdep splat · 66b531d3
      Dan Williams authored
      commit 0beb2012 upstream.
      
      Holding the reconfig_mutex over a potential userspace fault sets up a
      lockdep dependency chain between filesystem-DAX and the libnvdimm ioctl
      path. Move the user access outside of the lock.
      
           [ INFO: possible circular locking dependency detected ]
           4.11.0-rc3+ #13 Tainted: G        W  O
           -------------------------------------------------------
           fallocate/16656 is trying to acquire lock:
            (&nvdimm_bus->reconfig_mutex){+.+.+.}, at: [<ffffffffa00080b1>] nvdimm_bus_lock+0x21/0x30 [libnvdimm]
           but task is already holding lock:
            (jbd2_handle){++++..}, at: [<ffffffff813b4944>] start_this_handle+0x104/0x460
      
          which lock already depends on the new lock.
      
          the existing dependency chain (in reverse order) is:
      
          -> #2 (jbd2_handle){++++..}:
                  lock_acquire+0xbd/0x200
                  start_this_handle+0x16a/0x460
                  jbd2__journal_start+0xe9/0x2d0
                  __ext4_journal_start_sb+0x89/0x1c0
                  ext4_dirty_inode+0x32/0x70
                  __mark_inode_dirty+0x235/0x670
                  generic_update_time+0x87/0xd0
                  touch_atime+0xa9/0xd0
                  ext4_file_mmap+0x90/0xb0
                  mmap_region+0x370/0x5b0
                  do_mmap+0x415/0x4f0
                  vm_mmap_pgoff+0xd7/0x120
                  SyS_mmap_pgoff+0x1c5/0x290
                  SyS_mmap+0x22/0x30
                  entry_SYSCALL_64_fastpath+0x1f/0xc2
      
          -> #1 (&mm->mmap_sem){++++++}:
                  lock_acquire+0xbd/0x200
                  __might_fault+0x70/0xa0
                  __nd_ioctl+0x683/0x720 [libnvdimm]
                  nvdimm_ioctl+0x8b/0xe0 [libnvdimm]
                  do_vfs_ioctl+0xa8/0x740
                  SyS_ioctl+0x79/0x90
                  do_syscall_64+0x6c/0x200
                  return_from_SYSCALL_64+0x0/0x7a
      
          -> #0 (&nvdimm_bus->reconfig_mutex){+.+.+.}:
                  __lock_acquire+0x16b6/0x1730
                  lock_acquire+0xbd/0x200
                  __mutex_lock+0x88/0x9b0
                  mutex_lock_nested+0x1b/0x20
                  nvdimm_bus_lock+0x21/0x30 [libnvdimm]
                  nvdimm_forget_poison+0x25/0x50 [libnvdimm]
                  nvdimm_clear_poison+0x106/0x140 [libnvdimm]
                  pmem_do_bvec+0x1c2/0x2b0 [nd_pmem]
                  pmem_make_request+0xf9/0x270 [nd_pmem]
                  generic_make_request+0x118/0x3b0
                  submit_bio+0x75/0x150
      
      Fixes: 62232e45 ("libnvdimm: control (ioctl) messages for nvdimm_bus and nvdimm devices")
      Cc: Dave Jiang <dave.jiang@intel.com>
      Reported-by: default avatarVishal Verma <vishal.l.verma@intel.com>
      Signed-off-by: default avatarDan Williams <dan.j.williams@intel.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      66b531d3
    • Juergen Gross's avatar
      xen, fbfront: fix connecting to backend · 6058cf99
      Juergen Gross authored
      commit 9121b15b upstream.
      
      Connecting to the backend isn't working reliably in xen-fbfront: in
      case XenbusStateInitWait of the backend has been missed the backend
      transition to XenbusStateConnected will trigger the connected state
      only without doing the actions required when the backend has
      connected.
      Signed-off-by: default avatarJuergen Gross <jgross@suse.com>
      Reviewed-by: default avatarBoris Ostrovsky <boris.ostrovsky@oracle.com>
      Signed-off-by: default avatarBartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      6058cf99
    • Martin K. Petersen's avatar
      scsi: sd: Fix capacity calculation with 32-bit sector_t · b689dfbe
      Martin K. Petersen authored
      commit 7c856152 upstream.
      
      We previously made sure that the reported disk capacity was less than
      0xffffffff blocks when the kernel was not compiled with large sector_t
      support (CONFIG_LBDAF). However, this check assumed that the capacity
      was reported in units of 512 bytes.
      
      Add a sanity check function to ensure that we only enable disks if the
      entire reported capacity can be expressed in terms of sector_t.
      Reported-by: default avatarSteve Magnani <steve.magnani@digidescorp.com>
      Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
      Reviewed-by: default avatarBart Van Assche <Bart.VanAssche@sandisk.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      b689dfbe
    • Fam Zheng's avatar
      scsi: sd: Consider max_xfer_blocks if opt_xfer_blocks is unusable · 44896195
      Fam Zheng authored
      commit 67804145 upstream.
      
      If device reports a small max_xfer_blocks and a zero opt_xfer_blocks, we
      end up using BLK_DEF_MAX_SECTORS, which is wrong and r/w of that size
      may get error.
      
      [mkp: tweaked to avoid setting rw_max twice and added typecast]
      
      Fixes: ca369d51 ("block/sd: Fix device-imposed transfer length limits")
      Signed-off-by: default avatarFam Zheng <famz@redhat.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      44896195
    • Martin K. Petersen's avatar
      scsi: sr: Sanity check returned mode data · 925adae6
      Martin K. Petersen authored
      commit a00a7862 upstream.
      
      Kefeng Wang discovered that old versions of the QEMU CD driver would
      return mangled mode data causing us to walk off the end of the buffer in
      an attempt to parse it. Sanity check the returned mode sense data.
      Reported-by: default avatarKefeng Wang <wangkefeng.wang@huawei.com>
      Tested-by: default avatarKefeng Wang <wangkefeng.wang@huawei.com>
      Signed-off-by: default avatarMartin K. Petersen <martin.petersen@oracle.com>
      Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
      925adae6