When switching from kthreads to vhost_tasks two bugs were added:
1. The vhost worker tasks's now show up as processes so scripts doing
ps or ps a would not incorrectly detect the vhost task as another
process.  2. kthreads disabled freeze by setting PF_NOFREEZE, but
vhost tasks's didn't disable or add support for them.

To fix both bugs, this switches the vhost task to be thread in the
process that does the VHOST_SET_OWNER ioctl, and has vhost_worker call
get_signal to support SIGKILL/SIGSTOP and freeze signals. Note that
SIGKILL/STOP support is required because CLONE_THREAD requires
CLONE_SIGHAND which requires those 2 signals to be supported.

This is a modified version of the patch written by Mike Christie
<michael.christie@oracle.com> which was a modified version of patch
originally written by Linus.

Much of what depended upon PF_IO_WORKER now depends on PF_USER_WORKER.
Including ignoring signals, setting up the register state, and having
get_signal return instead of calling do_group_exit.

Tidied up the vhost_task abstraction so that the definition of
vhost_task only needs to be visible inside of vhost_task.c.  Making
it easier to review the code and tell what needs to be done where.
As part of this the main loop has been moved from vhost_worker into
vhost_task_fn.  vhost_worker now returns true if work was done.

The main loop has been updated to call get_signal which handles
SIGSTOP, freezing, and collects the message that tells the thread to
exit as part of process exit.  This collection clears
__fatal_signal_pending.  This collection is not guaranteed to
clear signal_pending() so clear that explicitly so the schedule()
sleeps.

For now the vhost thread continues to exist and run work until the
last file descriptor is closed and the release function is called as
part of freeing struct file.  To avoid hangs in the coredump
rendezvous and when killing threads in a multi-threaded exec.  The
coredump code and de_thread have been modified to ignore vhost threads.

Remvoing the special case for exec appears to require teaching
vhost_dev_flush how to directly complete transactions in case
the vhost thread is no longer running.

Removing the special case for coredump rendezvous requires either the
above fix needed for exec or moving the coredump rendezvous into
get_signal.

Fixes: 6e890c5d ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Co-developed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394

Pull firewire fix from Takashi Sakamoto:
 "A single patch to use a flexible array rather than a zero-length one"

* tag 'firewire-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
  firewire: Replace zero-length array with flexible-array member

Pull mailbox fix from Jassi Brar:
 "Fix missing mutex unlock in mailbox-test"

* tag 'mailbox-fixes-6.4-rc5' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: mailbox-test: fix a locking issue in mbox_test_message_write()

Zero-length and one-element arrays are deprecated, and we are moving
towards adopting C99 flexible-array members, instead.

Address the following warnings found with GCC-13 and
-fstrict-flex-arrays=3 enabled:
sound/firewire/amdtp-stream.c: In function ‘build_it_pkt_header’:
sound/firewire/amdtp-stream.c:694:17: warning: ‘generate_cip_header’ accessing 8 bytes in a region of size 0 [-Wstringop-overflow=]
  694 |                 generate_cip_header(s, cip_header, data_block_counter, syt);
      |                 ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
sound/firewire/amdtp-stream.c:694:17: note: referencing argument 2 of type ‘__be32[2]’ {aka ‘unsigned int[2]’}
sound/firewire/amdtp-stream.c:667:13: note: in a call to function ‘generate_cip_header’
  667 | static void generate_cip_header(struct amdtp_stream *s, __be32 cip_header[2],
      |             ^~~~~~~~~~~~~~~~~~~

This helps with the ongoing efforts to tighten the FORTIFY_SOURCE
routines on memcpy() and help us make progress towards globally
enabling -fstrict-flex-arrays=3 [1].

Link: https://github.com/KSPP/linux/issues/21
Link: https://github.com/KSPP/linux/issues/303
Link: https://gcc.gnu.org/pipermail/gcc-patches/2022-October/602902.html [1]
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZHT0V3SpvHyxCv5W@workSigned-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>

Pull HID fixes from Jiri Kosina:

 - Regression fix for overlong long timeouts during initialization on
   some Logitech Unifying devices (Bastien Nocera)

 - error handling and overflow fixes for Wacom driver (Denis Arefev,
   Jason Gerecke, Nikita Zhandarovich)

* tag 'for-linus-2023060101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: Handle timeout differently from busy
  HID: wacom: Add error check to wacom_parse_and_register()
  HID: google: add jewel USB id
  HID: wacom: avoid integer overflow in wacom_intuos_inout()
  HID: wacom: Check for string overflow from strscpy calls

Pull ata fix from Damien Le Moal:

 - Fix ata_find_dev() use of the device number to find a struct
   ata_device for a port. This addresses issues with some passthrough
   commands with libsas managed devices.

* tag 'ata-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
  ata: libata-scsi: Use correct device no in ata_find_dev()

Pull smb server fixes from Steve French:
 "Eight server fixes (most also for stable):

   - Two fixes for uninitialized pointer reads (rename and link)

   - Fix potential UAF in oplock break

   - Two fixes for potential out of bound reads in negotiate

   - Fix crediting bug

   - Two fixes for xfstests (allocation size fix for test 694 and lookup
     issue shown by test 464)"

* tag '6.4-rc4-smb3-server-fixes' of git://git.samba.org/ksmbd:
  ksmbd: call putname after using the last component
  ksmbd: fix incorrect AllocationSize set in smb2_get_info
  ksmbd: fix UAF issue from opinfo->conn
  ksmbd: fix multiple out-of-bounds read during context decoding
  ksmbd: fix slab-out-of-bounds read in smb2_handle_negotiate
  ksmbd: fix credit count leakage
  ksmbd: fix uninitialized pointer read in smb2_create_link()
  ksmbd: fix uninitialized pointer read in ksmbd_vfs_rename()

Pull smb client fixes from Steve French:
 "Four small smb3 client fixes:

   - two small fixes suggested by kernel test robot

   - small cleanup fix

   - update Paulo's email address in the maintainer file"

* tag '6.4-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: address unused variable warning
  smb: delete an unnecessary statement
  smb3: missing null check in SMB2_change_notify
  smb3: update a reviewer email in MAINTAINERS file

There was a bug where this code forgot to unlock the tdev->mutex if the
kzalloc() failed.  Fix this issue, by moving the allocation outside the
lock.

Fixes: 2d1e952a ("mailbox: mailbox-test: Fix potential double-free in mbox_test_message_write()")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Pull rdma fixes from Jason Gunthorpe:

 - Fix 64K ARM page size support in bnxt_re and efa

 - bnxt_re fixes for a memory leak, incorrect error handling and a
   remove a bogus FW failure when running on a VF

 - Update MAINTAINERS for hns and efa

 - Fix two rxe regressions added this merge window in error unwind and
   incorrect spinlock primitives

 - hns gets a better algorithm for allocating page tables to avoid
   running out of resources, and a timeout adjustment

 - Fix a text case failure in hns

 - Use after free in irdma and fix incorrect construction of a WQE
   causing mis-execution

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/irdma: Fix Local Invalidate fencing
  RDMA/irdma: Prevent QP use after free
  MAINTAINERS: Update maintainer of Amazon EFA driver
  RDMA/bnxt_re: Do not enable congestion control on VFs
  RDMA/bnxt_re: Fix return value of bnxt_re_process_raw_qp_pkt_rx
  RDMA/bnxt_re: Fix a possible memory leak
  RDMA/hns: Modify the value of long message loopback slice
  RDMA/hns: Fix base address table allocation
  RDMA/hns: Fix timeout attr in query qp for HIP08
  RDMA/efa: Fix unsupported page sizes in device
  RDMA/rxe: Convert spin_{lock_bh,unlock_bh} to spin_{lock_irqsave,unlock_irqrestore}
  RDMA/rxe: Fix double unlock in rxe_qp.c
  MAINTAINERS: Update maintainers of HiSilicon RoCE
  RDMA/bnxt_re: Fix the page_size used during the MR creation

Pull ext4 fixes from Ted Ts'o:
 "Fix two regressions in ext4 and a number of issues reported by syzbot"

* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: enable the lazy init thread when remounting read/write
  ext4: fix fsync for non-directories
  ext4: add lockdep annotations for i_data_sem for ea_inode's
  ext4: disallow ea_inodes with extended attributes
  ext4: set lockdep subclass for the ea_inode in ext4_xattr_inode_cache_find()
  ext4: add EA_INODE checking to ext4_iget()

If an attempt at contacting a receiver or a device fails because the
receiver or device never responds, don't restart the communication, only
restart it if the receiver or device answers that it's busy, as originally
intended.

This was the behaviour on communication timeout before commit 586e8fed
("HID: logitech-hidpp: Retry commands when device is busy").

This fixes some overly long waits in a critical path on boot, when
checking whether the device is connected by getting its HID++ version.
Signed-off-by: Bastien Nocera <hadess@hadess.net>
Suggested-by: Mark Lord <mlord@pobox.com>
Fixes: 586e8fed ("HID: logitech-hidpp: Retry commands when device is busy")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217412Signed-off-by: Jiri Kosina <jkosina@suse.cz>

Pull btrfs fixes from David Sterba:
 "One bug fix and two build warning fixes:

   - call proper end bio callback for metadata RAID0 in a rare case of
     an unaligned block

   - fix uninitialized variable (reported by gcc 10.2)

   - fix warning about potential access beyond array bounds on mips64
     with 64k pages (runtime check would not allow that)"

* tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix csum_tree_block page iteration to avoid tripping on -Werror=array-bounds
  btrfs: fix an uninitialized variable warning in btrfs_log_inode
  btrfs: call btrfs_orig_bbio_end_io in btrfs_end_bio_work

Merge tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Fix BPF CO-RE naming convention for checking the availability of
   fields on 'union perf_mem_data_src' on the running kernel

 - Remove the use of llvm-strip on BPF skel object files, not needed,
   fixes a build breakage when the llvm package, that contains it in
   most distros, isn't installed

 - Fix tools that use both evsel->{bpf_counter_list,bpf_filters},
   removing them from a union

 - Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
   previously it was working only when using the '-n' alternative

 - Don't stop building when both binutils-devel and a C++ compiler isn't
   available to compile the alternative C++ demangle support code,
   disable that feature instead

 - Sync the linux/in.h and coresight-pmu.h header copies with the kernel
   sources

 - Fix relative include path to cs-etm.h

* tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  perf evsel: Separate bpf_counter_list and bpf_filters, can be used at the same time
  tools headers UAPI: Sync the linux/in.h with the kernel sources
  perf cs-etm: Copy kernel coresight-pmu.h header
  perf bpf: Do not use llvm-strip on BPF binary
  perf build: Don't compile demangle-cxx.cpp if not necessary
  perf arm: Fix include path to cs-etm.h
  perf bpf filter: Fix a broken perf sample data naming for BPF CO-RE
  perf ftrace latency: Remove unnecessary "--" from --use-nsec option

Pull regmap fixes from Mark Brown:
 "The most important fix here is for missing dropping of the RCU read
  lock when syncing maple tree register caches, the physical devices I
  have that use the code don't do any syncing so I'd only ever tested
  this with virtual devices and missed the fact that we need to drop the
  lock in order to write to buses that need to sleep.

  Otherwise there's a fix for an edge case when splitting up large batch
  writes which has been lurking for a long time, a check to make sure
  nobody writes new drivers with a bug that was found in several
  SoundWire drivers and a tweak to the way the new kunit tests are
  enabled to ensure they don't cause regmap to be enabled when it
  wouldn't otherwise be"

* tag 'regmap-fix-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: maple: Drop the RCU read lock while syncing registers
  regmap: sdw: check for invalid multi-register writes config
  regmap: Account for register length when chunking
  regmap: REGMAP_KUNIT should not select REGMAP

Pull modules fix from Luis Chamberlain:
 "A fix is provided for ia64. Even though ia64 is on life support it
  helps to fix issues if we can. Thanks to Linus for doing tons of the
  ia64 debugging"

* tag 'modules-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
  module: fix module load for ia64

In commit a44be64b ("ext4: don't clear SB_RDONLY when remounting
r/w until quota is re-enabled") we defer clearing tyhe SB_RDONLY flag
in struct super.  However, we didn't defer when we checked sb_rdonly()
to determine the lazy itable init thread should be enabled, with the
next result that the lazy inode table initialization would not be
properly started.  This can cause generic/231 to fail in ext4's
nojournal mode.

Fix this by moving when we decide to start or stop the lazy itable
init thread to after we clear the SB_RDONLY flag when we are
remounting the file system read/write.

Fixes a44be64b ("ext4: don't clear SB_RDONLY when remounting r/w until...")
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230527035729.1001605-1-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Commit e360c6ed ("ext4: Drop special handling of journalled data
from ext4_sync_file()") simplified ext4_sync_file() by dropping special
handling of journalled data mode as it was not needed anymore. However
that branch was also used for directories and symlinks and since the
fastcommit code does not track metadata changes to non-regular files, the
change has caused e.g. fsync(2) on directories to not commit transaction
as it should. Fix the problem by adding handling for non-regular files.

Fixes: e360c6ed ("ext4: Drop special handling of journalled data from ext4_sync_file()")
Reported-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/all/ZFqO3xVnmhL7zv1x@debian-BULLSEYE-live-builder-AMD64Signed-off-by: Jan Kara <jack@suse.cz>
Tested-by: Eric Whitney <enwlinux@gmail.com>
Link: https://lore.kernel.org/r/20230524104453.8734-1-jack@suse.czSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Treat i_data_sem for ea_inodes as being in their own lockdep class to
avoid lockdep complaints about ext4_setattr's use of inode_lock() on
normal inodes potentially causing lock ordering with i_data_sem on
ea_inodes in ext4_xattr_inode_write().  However, ea_inodes will be
operated on by ext4_setattr(), so this isn't a problem.

Cc: stable@kernel.org
Link: https://syzkaller.appspot.com/bug?extid=298c5d8fb4a128bc27b0
Reported-by: syzbot+298c5d8fb4a128bc27b0@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-5-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>

An ea_inode stores the value of an extended attribute; it can not have
extended attributes itself, or this will cause recursive nightmares.
Add a check in ext4_iget() to make sure this is the case.

Cc: stable@kernel.org
Reported-by: syzbot+e44749b6ba4d0434cd47@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-4-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>

If the ea_inode has been pushed out of the inode cache while there is
still a reference in the mb_cache, the lockdep subclass will not be
set on the inode, which can lead to some lockdep false positives.

Fixes: 33d201e0 ("ext4: fix lockdep warning about recursive inode locking")
Cc: stable@kernel.org
Reported-by: syzbot+d4b971e744b1f5439336@syzkaller.appspotmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-3-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Frank reported boot regression in ia64 as:

ELILO v3.16 for EFI/IA-64
..
Uncompressing Linux... done
Loading file AC100221.initrd.img...done
[    0.000000] Linux version 6.4.0-rc3 (root@x4270) (ia64-linux-gcc
(GCC) 12.2.0, GNU ld (GNU Binutils) 2.39) #1 SMP Thu May 25 15:52:20
CEST 2023
[    0.000000] efi: EFI v1.1 by HP
[    0.000000] efi: SALsystab=0x3ee7a000 ACPI 2.0=0x3fe2a000
ESI=0x3ee7b000 SMBIOS=0x3ee7c000 HCDP=0x3fe28000
[    0.000000] PCDP: v3 at 0x3fe28000
[    0.000000] earlycon: uart8250 at MMIO 0x00000000f4050000 (options
'9600n8')
[    0.000000] printk: bootconsole [uart8250] enabled
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x000000003FE2A000 000028 (v02 HP    )
[    0.000000] ACPI: XSDT 0x000000003FE2A02C 0000CC (v01 HP     rx2620
00000000 HP   00000000)
[...]
[    3.793350] Run /init as init process
Loading, please wait...
Starting systemd-udevd version 252.6-1
[    3.951100] ------------[ cut here ]------------
[    3.951100] WARNING: CPU: 6 PID: 140 at kernel/module/main.c:1547
__layout_sections+0x370/0x3c0
[    3.949512] Unable to handle kernel paging request at virtual address
1000000000000000
[    3.951100] Modules linked in:
[    3.951100] CPU: 6 PID: 140 Comm: (udev-worker) Not tainted 6.4.0-rc3 #1
[    3.956161] (udev-worker)[142]: Oops 11003706212352 [1]
[    3.951774] Hardware name: hp server rx2620                   , BIOS
04.29
11/30/2007
[    3.951774]
[    3.951774] Call Trace:
[    3.958339] Unable to handle kernel paging request at virtual address
1000000000000000
[    3.956161] Modules linked in:
[    3.951774]  [<a0000001000156d0>] show_stack.part.0+0x30/0x60
[    3.951774]                                 sp=e000000183a67b20
bsp=e000000183a61628
[    3.956161]
[    3.956161]

which bisect to module_memory change [1].

Debug showed that ia64 uses some special sections:

__layout_sections: section .got (sh_flags 10000002) matched to MOD_INVALID
__layout_sections: section .sdata (sh_flags 10000003) matched to MOD_INVALID
__layout_sections: section .sbss (sh_flags 10000003) matched to MOD_INVALID

All these sections are loaded to module core memory before [1].

Fix ia64 boot by loading these sections to MOD_DATA (core rw data).

[1] commit ac3b4328 ("module: replace module_layout with module_memory")

Fixes: ac3b4328 ("module: replace module_layout with module_memory")
Reported-by: Frank Scheiner <frank.scheiner@web.de>
Closes: https://lists.debian.org/debian-ia64/2023/05/msg00010.html
Closes: https://marc.info/?l=linux-ia64&m=168509859125505
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>

For devices not attached to a port multiplier and managed directly by
libata, the device number passed to ata_find_dev() must always be lower
than the maximum number of devices returned by ata_link_max_devices().
That is 1 for SATA devices or 2 for an IDE link with master+slave
devices. This device number is the SCSI device ID which matches these
constraints as the IDs are generated per port and so never exceed the
maximum number of devices for the link being used.

However, for libsas managed devices, SCSI device IDs are assigned per
struct scsi_host, leading to device IDs for SATA devices that can be
well in excess of libata per-link maximum number of devices. This
results in ata_find_dev() to always return NULL for libsas managed
devices except for the first device of the target scsi_host with ID
(device number) equal to 0. This issue is visible by executing the
hdparm utility, which fails. E.g.:

hdparm -i /dev/sdX
/dev/sdX:
  HDIO_GET_IDENTITY failed: No message of desired type

Fix this by rewriting ata_find_dev() to ignore the device number for
non-PMP attached devices with a link with at most 1 device, that is SATA
devices. For these, the device number 0 is always used to
return the correct pointer to the struct ata_device of the port link.
This change excludes IDE master/slave setups (maximum number of devices
per link is 2) and port-multiplier attached devices. Also, to be
consistant with the fact that SCSI device IDs and channel numbers used
as device numbers are both unsigned int, change the devno argument of
ata_find_dev() to unsigned int.
Reported-by: Xingui Yang <yangxingui@huawei.com>
Fixes: 41bda9c9 ("libata-link: update hotplug to handle PMP links")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>

If the local invalidate fence is indicated in the WR, only the read fence
is currently being set in WQE. Fix this to set both the read and local
fence in the WQE.

Fixes: b48c24c2 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20230522155654.1309-4-shiraz.saleem@intel.comSigned-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

There is a window where the poll cq may use a QP that has been freed.
This can happen if a CQE is polled before irdma_clean_cqes() can clear the
CQE's related to the QP and the destroy QP races to free the QP memory.
then the QP structures are used in irdma_poll_cq.  Fix this by moving the
clearing of CQE's before the reference is removed and the QP is destroyed.

Fixes: b48c24c2 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20230522155654.1309-3-shiraz.saleem@intel.comSigned-off-by: Mustafa Ismail <mustafa.ismail@intel.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Change EFA driver maintainer from Gal Pressman to myself. Keep Gal as a
reviewer at his request.

Link: https://lore.kernel.org/r/20230525094444.12570-1-mrgolin@amazon.comSigned-off-by: Michael Margolin <mrgolin@amazon.com>
Acked-by: Gal Pressman <gal.pressman@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>

Pull tracing fixes from Steven Rostedt:
 "User events:

   - Use long instead of int for storing the enable set/clear bit, as it
     was found that big endian machines could end up using the wrong
     bits.

   - Split allocating mm and attaching it. This keeps the allocation
     separate from the registration and avoids various races.

   - Remove RCU locking around pin_user_pages_remote() as that can
     schedule. The RCU protection is no longer needed with the above
     split of mm allocation and attaching.

   - Rename the "link" fields of the various structs to something more
     meaningful.

   - Add comments around user_event_mm struct usage and locking
     requirements.

  Timerlat tracer:

   - Fix missed wakeup of timerlat thread caused by the timerlat
     interrupt triggering when tracing is off. The timer interrupt
     handler needs to always wake up the timerlat thread regardless if
     tracing is enabled or not, otherwise, it will never wake up.

  Histograms:

   - Fix regression of breaking the "stacktrace" modifier for variables.
     That modifier cannot be used for values, but can be used for
     variables that are passed from one histogram to the next. This was
     broken when adding the restriction to values as the variable logic
     used the same code.

   - Rename the special field "stacktrace" to "common_stacktrace".

     Special fields (that are not actually part of the event, but can
     act just like event fields, like 'comm' and 'timestamp') should be
     prefixed with 'common_' for consistency. To keep backward
     compatibility, 'stacktrace' can still be used (as with the special
     field 'cpu'), but can be overridden if the event has a field called
     'stacktrace'.

   - Update the synthetic event selftests to use the new name (synthetic
     events are created by histograms)

  Tracing bootup selftests:

   - Reorganize the code to keep artifacts of the selftests not compiled
     in when selftests are not configured.

   - Add various cond_resched() around the selftest code, as the
     softlock watchdog was triggering much more often. It appears that
     the kernel runs slower now with full debugging enabled.

   - While debugging ftrace with ftrace (using an instance ring buffer
     instead of the top level one), I found that the selftests were
     disabling prints to the debug instance.

     This should not happen, as the selftests only disable printing to
     the main buffer as the selftests examine the main buffer to see if
     it has what it expects, and prints can make the tests fail.

     Make the selftests only disable printing to the toplevel buffer,
     and leave the instance buffers alone"

* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing: Have function_graph selftest call cond_resched()
  tracing: Only make selftest conditionals affect the global_trace
  tracing: Make tracing_selftest_running/delete nops when not used
  tracing: Have tracer selftests call cond_resched() before running
  tracing: Move setting of tracing_selftest_running out of register_tracer()
  tracing/selftests: Update synthetic event selftest to use common_stacktrace
  tracing: Rename stacktrace field to common_stacktrace
  tracing/histograms: Allow variables to have some modifiers
  tracing/user_events: Document user_event_mm one-shot list usage
  tracing/user_events: Rename link fields for clarity
  tracing/user_events: Remove RCU lock while pinning pages
  tracing/user_events: Split up mm alloc and attach
  tracing/timerlat: Always wakeup the timerlat thread
  tracing/user_events: Use long vs int for atomic bit ops

Pull crypto fix from Herbert Xu:
 "Fix an alignment crash in x86/aria"

* tag 'v6.4-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: x86/aria - Use 16 byte alignment for GFNI constant vectors

This reverts commit 9828ed3f.

Sadly, it does seem to cause failures to load modules. Johan Hovold reports:

 "This change breaks module loading during boot on the Lenovo Thinkpad
  X13s (aarch64).

  Specifically it results in indefinite probe deferral of the display
  and USB (ethernet) which makes it a pain to debug. Typing in the dark
  to acquire some logs reveals that other modules are missing as well"

Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later.  The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.

One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.
Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/lkml/ZHRpH-JXAxA6DnzR@hovoldconsulting.com/Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

When all kernel debugging is enabled (lockdep, KSAN, etc), the function
graph enabling and disabling can take several seconds to complete. The
function_graph selftest enables and disables function graph tracing
several times. With full debugging enabled, the soft lockup watchdog was
triggering because the selftest was running without ever scheduling.

Add cond_resched() throughout the test to make sure it does not trigger
the soft lockup detector.

Link: https://lkml.kernel.org/r/20230528051742.1325503-6-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The tracing_selftest_running and tracing_selftest_disabled variables were
to keep trace_printk() and other writes from affecting the tracing
selftests, as the tracing selftests would examine the ring buffer to see
if it contained what it expected or not. trace_printk() and friends could
add to the ring buffer and cause the selftests to fail (and then disable
the tracer that was being tested). To keep that from happening, these
variables were added and would keep trace_printk() and friends from
writing to the ring buffer while the tests were going on.

But this was only the top level ring buffer (owned by the global_trace
instance). There is no reason to prevent writing into ring buffers of
other instances via the trace_array_printk() and friends. For the
functions that could be used by other instances, check if the global_trace
is the tracer instance that is being written to before deciding to not
allow the write.

Link: https://lkml.kernel.org/r/20230528051742.1325503-5-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

There's no reason to test the condition variables tracing_selftest_running
or tracing_selftest_delete when tracing selftests are not enabled. Make
them define 0s when not the selftests are not configured in.

Link: https://lkml.kernel.org/r/20230528051742.1325503-4-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

As there are more and more internal selftests being added to the Linux
kernel (KSAN, lockdep, etc) the selftests are taking longer to run when
these are enabled. Add a cond_resched() to the calling of
do_run_tracer_selftest() to force a schedule if NEED_RESCHED is set,
otherwise the soft lockup watchdog may trigger on boot up.

Link: https://lkml.kernel.org/r/20230528051742.1325503-3-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

The variables tracing_selftest_running and tracing_selftest_disabled are
only used for when CONFIG_FTRACE_STARTUP_TEST is enabled. Make them only
visible within the selftest code. The setting of those variables are in
the register_tracer() call, and set in a location where they do not need
to be. Create a wrapper around run_tracer_selftest() called
do_run_tracer_selftest() which sets those variables, and have
register_tracer() call that instead.

Having those variables only set within the CONFIG_FTRACE_STARTUP_TEST
scope gets rid of them (and also the ability to remove testing against
them) when the startup tests are not enabled (most cases).

Link: https://lkml.kernel.org/r/20230528051742.1325503-2-rostedt@goodmis.orgSigned-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>

Pull phy fixes from Vinod Koul:

 - init count imbalance fix in qcom-qmp-pcie and combo drivers

 - kernel doc header fix for qcom-snps driver

 - mediatek floating point comparison fix

 - amlogic fix register value

* tag 'phy-fixes-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy:
  phy: qcom-snps: correct struct qcom_snps_hsphy kerneldoc
  phy: amlogic: phy-meson-g12a-mipi-dphy-analog: fix CNTL2_DIF_TX_CTL0 value
  phy: mediatek: rework the floating point comparisons to fixed point
  phy: qcom-qmp-pcie-msm8996: fix init-count imbalance
  phy: qcom-qmp-combo: fix init-count imbalance

Pull dmaengine fixes from Vinod Koul:
 "Driver fixes for the at-hdmac, pl330, TI and IDXD drivers:

   - AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
     handling and potential NULL dereference check

   - PL330 function rename to avoid conflicts

   - build warning fix for pm function in TI driver

   - IDXD driver fix for passing freed memory"

* tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
  dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits
  dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling
  dmaengine: pl330: rename _start to prevent build error
  dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()
  dmaengine: ti: k3-udma: annotate pm function with __maybe_unused
  dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()

Add a new flag, EXT4_IGET_EA_INODE which indicates whether the inode
is expected to have the EA_INODE flag or not.  If the flag is not
set/clear as expected, then fail the iget() operation and mark the
file system as corrupted.

This commit also makes the ext4_iget() always perform the
is_bad_inode() check even when the inode is already inode cache.  This
allows us to remove the is_bad_inode() check from the callers of
ext4_iget() in the ea_inode code.

Reported-by: syzbot+cbb68193bdb95af4340a@syzkaller.appspotmail.com
Reported-by: syzbot+62120febbd1ee3c3c860@syzkaller.appspotmail.com
Reported-by: syzbot+edce54daffee36421b4c@syzkaller.appspotmail.com
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Link: https://lore.kernel.org/r/20230524034951.779531-2-tytso@mit.eduSigned-off-by: Theodore Ts'o <tytso@mit.edu>

Pull x86 cpu fix from Thomas Gleixner:
 "A single fix for x86:

   - Prevent a bogus setting for the number of HT siblings, which is
     caused by the CPUID evaluation trainwreck of X86. That recomputes
     the value for each CPU, so the last CPU "wins". That can cause
     completely bogus sibling values"

* tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms

Pull perf fixes from Thomas Gleixner:
 "A small set of perf fixes:

   - Make the MSR-readout based CHA discovery work around broken
     discovery tables in some SPR firmwares.

   - Prevent saving PEBS configuration which has software bits set that
     cause a crash when restored into the relevant MSR"

* tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/uncore: Correct the number of CHAs on SPR
  perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS