- 05 Oct, 2014 40 commits
-
-
Axel Lin authored
commit d9f26748 upstream. device_add() expects that any memory allocated via devm_* API is only done in the device's probe function. Fix below boot warning: [ 3.092348] WARNING: at drivers/base/dd.c:286 [ 3.096637] Modules linked in: [ 3.099697] CPU: 0 PID: 25 Comm: kworker/u2:1 Tainted: G W 3.16.1-s3k-drv-999-svn5771_knld-999 #158 [ 3.109610] Workqueue: deferwq deferred_probe_work_func [ 3.114736] task: c787f020 ti: c790c000 task.ti: c790c000 [ 3.120062] NIP: c01df158 LR: c01df144 CTR: 00000000 [ 3.124983] REGS: c790db30 TRAP: 0700 Tainted: G W (3.16.1-s3k-drv-999-svn5771_knld-999) [ 3.134162] MSR: 00029032 <EE,ME,IR,DR,RI> CR: 22002082 XER: 20000000 [ 3.140703] [ 3.140703] GPR00: 00000001 c790dbe0 c787f020 00000044 00000054 00000308 c056da0e 20737069 [ 3.140703] GPR08: 33323736 000ebfe0 00000308 000ebfdf 22002082 00000000 c046c5a0 c046c608 [ 3.140703] GPR16: c046c614 c046c620 c046c62c c046c638 c046c648 c046c654 c046c68c c046c6c4 [ 3.140703] GPR24: 00000000 00000000 00000003 c0401aa0 c0596638 c059662c c054e7a8 c7996800 [ 3.170102] NIP [c01df158] driver_probe_device+0xf8/0x334 [ 3.175431] LR [c01df144] driver_probe_device+0xe4/0x334 [ 3.180633] Call Trace: [ 3.183093] [c790dbe0] [c01df144] driver_probe_device+0xe4/0x334 (unreliable) [ 3.190147] [c790dc10] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.195741] [c790dc40] [c01df5fc] device_attach+0xcc/0xf8 [ 3.201076] [c790dc60] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.206666] [c790dc80] [c01db9f8] device_add+0x270/0x564 [ 3.211923] [c790dcc0] [c0219e84] spi_add_device+0xc0/0x190 [ 3.217427] [c790dce0] [c021a79c] spi_register_master+0x720/0x834 [ 3.223455] [c790dd40] [c021cb48] of_fsl_spi_probe+0x55c/0x614 [ 3.229234] [c790dda0] [c01e0d2c] platform_drv_probe+0x30/0x74 [ 3.234987] [c790ddb0] [c01df18c] driver_probe_device+0x12c/0x334 [ 3.241008] [c790dde0] [c01dd15c] bus_for_each_drv+0x7c/0xc0 [ 3.246602] [c790de10] [c01df5fc] device_attach+0xcc/0xf8 [ 3.251937] [c790de30] [c01dd6d4] bus_probe_device+0xb4/0xc4 [ 3.257536] [c790de50] [c01de9d8] deferred_probe_work_func+0x98/0xe0 [ 3.263816] [c790de70] [c00305b8] process_one_work+0x18c/0x440 [ 3.269577] [c790dea0] [c0030a00] worker_thread+0x194/0x67c [ 3.275105] [c790def0] [c0039198] kthread+0xd0/0xe4 [ 3.279911] [c790df40] [c000c6d0] ret_from_kernel_thread+0x5c/0x64 [ 3.285970] Instruction dump: [ 3.288900] 80de0000 419e01d0 3b7b0038 3c60c046 7f65db78 38635264 48211b99 813f00a0 [ 3.296559] 381f00a0 7d290278 3169ffff 7c0b4910 <0f000000> 93df0044 7fe3fb78 4bfffd4d Reported-by:
leroy christophe <christophe.leroy@c-s.fr> Signed-off-by:
Axel Lin <axel.lin@ingics.com> Tested-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Matan Barak authored
commit a59c5850 upstream. When marsheling a user path to the kernel struct ib_sa_path, need to zero smac, dmac and set the vlan id to the "no vlan" value. Fixes: dd5f03be ("IB/core: Ethernet L2 attributes in verbs/cm structures") Reported-by:
Aleksey Senin <alekseys@mellanox.com> Signed-off-by:
Matan Barak <matanb@mellanox.com> Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by:
Roland Dreier <roland@purestorage.com> Signed-off-by:
-
Moni Shoua authored
commit f5c4834d upstream. When reading the IPv6 addresses from the net-device, make sure to avoid adding a duplicate entry to the GID table because of equality between the default GID we generate and the default IPv6 link-local address of the device. Fixes: acc4fccf ("IB/mlx4: Make sure GID index 0 is always occupied") Signed-off-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Moni Shoua authored
commit e381835c upstream. When Ethernet netdev is not present for a port (e.g. when the link layer type of the port is InfiniBand) it's possible to dereference a null pointer when we do netdevice scanning. To fix that, we move a section of code that needs to run only when netdev is present to a proper if () statement. Fixes: ad4885d2 ("IB/mlx4: Build the port IBoE GID table properly under bonding") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Mike Marciniszyn authored
commit 85cbb7c7 upstream. This particular reference count is not needed with the rcu protection, and the current code leaks a reference count, causing a hang in qib_qp_destroy(). Reviewed-by:
Dennis Dalessandro <dennis.dalessandro@intel.com> Signed-off-by:
Mike Marciniszyn <mike.marciniszyn@intel.com> Signed-off-by:
-
Al Viro authored
commit cfb2f9d5 upstream. Callers of d_splice_alias(dentry, inode) don't need iput(), neither on success nor on failure. Either the reference to inode is stored in a previously negative dentry, or it's dropped. In either case inode reference the caller used to hold is consumed. __gfs2_lookup() does iput() in case when d_splice_alias() has failed. Double iput() if we ever hit that. And gfs2_create_inode() ends up not only with double iput(), but with link count dropped to zero - on an inode it has just found in directory. Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Steven Whitehouse <swhiteho@redhat.com> Signed-off-by:
-
Amit Shah authored
commit eeec6263 upstream. This reverts commit e052dbf5. Now that we use the virtio ->scan() function to register with the hwrng core, we will not get read requests till probe is successfully finished. So revert the workaround we had in place to refuse read requests while we were not yet setup completely. Signed-off-by:
Amit Shah <amit.shah@redhat.com> Signed-off-by:
Rusty Russell <rusty@rustcorp.com.au> Signed-off-by:
-
Amit Shah authored
commit 5c062734 upstream. Instead of calling hwrng_register() in the probe routing, call it in the scan routine. This ensures that when hwrng_register() is successful, and it requests a few random bytes to seed the kernel's pool at init, we're ready to service that request. This will also enable us to remove the workaround added previously to check whether probe was completed, and only then ask for data from the host. The revert follows in the next commit. There's a slight behaviour change here on unsuccessful hwrng_register(). Previously, when hwrng_register() failed, the probe() routine would fail, and the vqs would be torn down, and driver would be marked not initialized. Now, the vqs will remain initialized, driver would be marked initialized as well, but won't be available in the list of RNGs available to hwrng core. To fix the failures, the procedure remains the same, i.e. unload and re-load the module, and hope things succeed the next time around. Signed-off-by:
-
Richard Larocque authored
commit 474e941b upstream. Locks the k_itimer's it_lock member when handling the alarm timer's expiry callback. The regular posix timers defined in posix-timers.c have this lock held during timout processing because their callbacks are routed through posix_timer_fn(). The alarm timers follow a different path, so they ought to grab the lock somewhere else. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by:
Richard Larocque <rlarocque@google.com> Signed-off-by:
John Stultz <john.stultz@linaro.org> Signed-off-by:
-
Richard Larocque authored
commit 265b81d2 upstream. Avoids sending a signal to alarm timers created with sigev_notify set to SIGEV_NONE by checking for that special case in the timeout callback. The regular posix timers avoid sending signals to SIGEV_NONE timers by not scheduling any callbacks for them in the first place. Although it would be possible to do something similar for alarm timers, it's simpler to handle this as a special case in the timeout. Prior to this patch, the alarm timer would ignore the sigev_notify value and try to deliver signals to the process anyway. Even worse, the sanity check for the value of sigev_signo is skipped when SIGEV_NONE was specified, so the signal number could be bogus. If sigev_signo was an unitialized value (as it often would be if SIGEV_NONE is used), then it's hard to predict which signal will be sent. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by:
-
Richard Larocque authored
commit e86fea76 upstream. Returns the time remaining for an alarm timer, rather than the time at which it is scheduled to expire. If the timer has already expired or it is not currently scheduled, the it_value's members are set to zero. This new behavior matches that of the other posix-timers and the POSIX specifications. This is a change in user-visible behavior, and may break existing applications. Hopefully, few users rely on the old incorrect behavior. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@kernel.org> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Sharvil Nanavati <sharvil@google.com> Signed-off-by:
-
John David Anglin authored
commit d26a7730 upstream. In spite of what the GCC manual says, the -mfast-indirect-calls has never been supported in the 64-bit parisc compiler. Indirect calls have always been done using function descriptors irrespective of the -mfast-indirect-calls option. Recently, it was noticed that a function descriptor was always requested when the -mfast-indirect-calls option was specified. This caused problems when the option was used in application code and doesn't make any sense because the whole point of the option is to avoid using a function descriptor for indirect calls. Fixing this broke 64-bit kernel builds. I will fix GCC but for now we need the attached change. This results in the same kernel code as before. Signed-off-by:
John David Anglin <dave.anglin@bell.net> Signed-off-by:
Helge Deller <deller@gmx.de> Signed-off-by:
-
Guy Martin authored
commit 89206491 upstream. The current LWS cas only works correctly for 32bit. The new LWS allows for CAS operations of variable size. Signed-off-by:
Guy Martin <gmsoft@tuxicoman.be> Signed-off-by:
-
Al Viro authored
commit 7bd88377 upstream. return the value instead, and have path_init() do the assignment. Broken by "vfs: Fix absolute RCU path walk failures due to uninitialized seq number", which was Cc-stable with 2.6.38+ as destination. This one should go where it went. To avoid dummy value returned in case when root is already set (it would do no harm, actually, since the only caller that doesn't ignore the return value is guaranteed to have nd->root *not* set, but it's more obvious that way), lift the check into callers. And do the same to set_root(), to keep them in sync. Signed-off-by:
-
Richard Genoud authored
commit 35b675b9 upstream. In set_termios(), interrupts where not disabled if UART_ENABLE_MS() was false. Tested on at91sam9g35. Signed-off-by:
Richard Genoud <richard.genoud@gmail.com> Reviewed-by:
Peter Hurley <peter@hurleysoftware.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Michael Ellerman authored
commit 78e05b14 upstream. Similar to the previous commit which described why we need to add a barrier to arch_spin_is_locked(), we have a similar problem with spin_unlock_wait(). We need a barrier on entry to ensure any spinlock we have previously taken is visibly locked prior to the load of lock->slock. It's also not clear if spin_unlock_wait() is intended to have ACQUIRE semantics. For now be conservative and add a barrier on exit to give it ACQUIRE semantics. Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Ellerman authored
commit 51d7d520 upstream. The kernel defines the function spin_is_locked(), which can be used to check if a spinlock is currently locked. Using spin_is_locked() on a lock you don't hold is obviously racy. That is, even though you may observe that the lock is unlocked, it may become locked at any time. There is (at least) one exception to that, which is if two locks are used as a pair, and the holder of each checks the status of the other before doing any update. Assuming *A and *B are two locks, and *COUNTER is a shared non-atomic value: The first CPU does: spin_lock(*A) if spin_is_locked(*B) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*A) And the second CPU does: spin_lock(*B) if spin_is_locked(*A) # nothing else smp_mb() LOAD r = *COUNTER r++ STORE *COUNTER = r spin_unlock(*B) Although this is a strange locking construct, it should work. It seems to be understood, but not documented, that spin_is_locked() is not a memory barrier, so in the examples above and below the caller inserts its own memory barrier before acting on the result of spin_is_locked(). For now we assume spin_is_locked() is implemented as below, and we break it out in our examples: bool spin_is_locked(*LOCK) { LOAD l = *LOCK return l.locked } Our intuition is that there should be no problem even if the two code sequences run simultaneously such as: CPU 0 CPU 1 ================================================== spin_lock(*A) spin_lock(*B) LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) If one CPU gets the lock before the other then it will do the update and the other CPU will back off: CPU 0 CPU 1 ================================================== spin_lock(*A) LOAD b = *B spin_lock(*B) if b.locked # false LOAD a = *A else if a.locked # true smp_mb() # nothing LOAD r1 = *COUNTER spin_unlock(*B) r1++ STORE *COUNTER = r1 spin_unlock(*A) However in reality spin_lock() itself is not indivisible. On powerpc we implement it as a load-and-reserve and store-conditional. Ignoring the retry logic for the lost reservation case, it boils down to: spin_lock(*LOCK) { LOAD l = *LOCK l.locked = true STORE *LOCK = l ACQUIRE_BARRIER } The ACQUIRE_BARRIER is required to give spin_lock() ACQUIRE semantics as defined in memory-barriers.txt: This acts as a one-way permeable barrier. It guarantees that all memory operations after the ACQUIRE operation will appear to happen after the ACQUIRE operation with respect to the other components of the system. On modern powerpc systems we use lwsync for ACQUIRE_BARRIER. lwsync is also know as "lightweight sync", or "sync 1". As described in Power ISA v2.07 section B.2.1.1, in this scenario the lwsync is not the barrier itself. It instead causes the LOAD of *LOCK to act as the barrier, preventing any loads or stores in the locked region from occurring prior to the load of *LOCK. Whether this behaviour is in accordance with the definition of ACQUIRE semantics in memory-barriers.txt is open to discussion, we may switch to a different barrier in future. What this means in practice is that the following can occur: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true LOAD b = *B LOAD a = *A STORE *A = a STORE *B = b if b.locked # false if a.locked # false else else smp_mb() smp_mb() LOAD r1 = *COUNTER LOAD r2 = *COUNTER r1++ r2++ STORE *COUNTER = r1 STORE *COUNTER = r2 # Lost update spin_unlock(*A) spin_unlock(*B) That is, the load of *B can occur prior to the store that makes *A visibly locked. And similarly for CPU 1. The result is both CPUs hold their lock and believe the other lock is unlocked. The easiest fix for this is to add a full memory barrier to the start of spin_is_locked(), so adding to our previous definition would give us: bool spin_is_locked(*LOCK) { smp_mb() LOAD l = *LOCK return l.locked } The new barrier orders the store to the lock we are locking vs the load of the other lock: CPU 0 CPU 1 ================================================== LOAD a = *A LOAD b = *B a.locked = true b.locked = true STORE *A = a STORE *B = b smp_mb() smp_mb() LOAD b = *B LOAD a = *A if b.locked # true if a.locked # true # nothing # nothing spin_unlock(*A) spin_unlock(*B) Although the above example is theoretical, there is code similar to this example in sem_lock() in ipc/sem.c. This commit in addition to the next commit appears to be a fix for crashes we are seeing in that code where we believe this race happens in practice. Signed-off-by:
-
Anton Blanchard authored
commit 85101af1 upstream. ABIv2 kernels are failing to backtrace through the kernel. An example: 39.30% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry __GI___libc_read The problem is in valid_next_sp() where we check that the new stack pointer is at least STACK_FRAME_OVERHEAD below the previous one. ABIv1 has a minimum stack frame size of 112 bytes consisting of 48 bytes and 64 bytes of parameter save area. ABIv2 changes that to 32 bytes with no paramter save area. STACK_FRAME_OVERHEAD is in theory the minimum stack frame size, but we over 240 uses of it, some of which assume that it includes space for the parameter area. We need to work through all our stack defines and rationalise them but let's fix perf now by creating STACK_FRAME_MIN_SIZE and using in valid_next_sp(). This fixes the issue: 30.64% readseek2_proce [kernel.kallsyms] [k] find_get_entry | --- find_get_entry pagecache_get_page generic_file_read_iter new_sync_read vfs_read sys_read syscall_exit __GI___libc_read Reported-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Johannes Stezenbach authored
commit d21ccfd0 upstream. In v3.15 the driver stopped to accept network packets after successful authentification, which could be worked around by passing the nohwcrypt=1 module parameter. This was not reproducible by everyone, and showed random behaviour in some tests. It was caused by an uninitialized variable introduced in 4ed1a8d4 ("ath9k_htc: use ath9k_cmn_rx_accept") and used in 341b29b9 ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess"). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=78581 Fixes: 341b29b9 ("ath9k_htc: use ath9k_cmn_rx_skb_postprocess") Signed-off-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
Arend van Spriel authored
commit 87c47903 upstream. The firmware notifies about interface changes through the IF event which has a NO_IF flag that means host can ignore the event. This behaviour was introduced in the driver by: commit 2ee8382f Author: Arend van Spriel <arend@broadcom.com> Date: Sat Aug 10 12:27:24 2013 +0200 brcmfmac: ignore IF event if firmware indicates it It turns out that the IF event for the P2P_DEVICE also has this flag set, but the event should not be ignored in this scenario. The mentioned commit caused a regression in 3.12 kernel in creation of the P2P_DEVICE interface. Reviewed-by:
Hante Meuleman <meuleman@broadcom.com> Reviewed-by:
Franky (Zhenhui) Lin <frankyl@broadcom.com> Reviewed-by:
Daniel (Deognyoun) Kim <dekim@broadcom.com> Reviewed-by:
Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by:
Arend van Spriel <arend@broadcom.com> Signed-off-by:
-
Wanpeng Li authored
commit 03bd4e1f upstream. The following bug can be triggered by hot adding and removing a large number of xen domain0's vcpus repeatedly: BUG: unable to handle kernel NULL pointer dereference at 0000000000000004 IP: [..] find_busiest_group PGD 5a9d5067 PUD 13067 PMD 0 Oops: 0000 [#3] SMP [...] Call Trace: load_balance ? _raw_spin_unlock_irqrestore idle_balance __schedule schedule schedule_timeout ? lock_timer_base schedule_timeout_uninterruptible msleep lock_device_hotplug_sysfs online_store dev_attr_store sysfs_write_file vfs_write SyS_write system_call_fastpath Last level cache shared mask is built during CPU up and the build_sched_domain() routine takes advantage of it to setup the sched domain CPU topology. However, llc_shared_mask is not released during CPU disable, which leads to an invalid sched domainCPU topology. This patch fix it by releasing the llc_shared_mask correctly during CPU disable. Yasuaki also reported that this can happen on real hardware: https://lkml.org/lkml/2014/7/22/1018 His case is here: == Here is an example on my system. My system has 4 sockets and each socket has 15 cores and HT is enabled. In this case, each core of sockes is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-44, 90-104 Socket#3 | 45-59, 105-119 Then llc_shared_mask of CPU#30 has 0x3fff80000001fffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-44 and 90-104. When hot-removing socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 But llc_shared_mask is not cleared. So llc_shared_mask of CPU#30 remains having 0x3fff80000001fffc0000000. After that, when hot-adding socket#2 and #3, each core of sockets is numbered as follows: | CPU# Socket#0 | 0-14 , 60-74 Socket#1 | 15-29, 75-89 Socket#2 | 30-59 Socket#3 | 90-119 Then llc_shared_mask of CPU#30 becomes 0x3fff8000fffffffc0000000. It means that last level cache of Socket#2 is shared with CPU#30-59 and 90-104. So the mask has the wrong value. Signed-off-by:
Wanpeng Li <wanpeng.li@linux.intel.com> Tested-by:
Linn Crosetto <linn@hp.com> Reviewed-by:
Borislav Petkov <bp@suse.de> Reviewed-by:
Toshi Kani <toshi.kani@hp.com> Reviewed-by:
Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Steven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1411547885-48165-1-git-send-email-wanpeng.li@linux.intel.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Peter Feiner authored
commit dbab31aa upstream. This fixes the same bug as b43790ee ("mm: softdirty: don't forget to save file map softdiry bit on unmap") and 9aed8614 ("mm/memory.c: don't forget to set softdirty on file mapped fault") where the return value of pte_*mksoft_dirty was being ignored. To be sure that no other pte/pmd "mk" function return values were being ignored, I annotated the functions in arch/x86/include/asm/pgtable.h with __must_check and rebuilt. The userspace effect of this bug is that the softdirty mark might be lost if a file mapped pte get zapped. Signed-off-by:
Peter Feiner <pfeiner@google.com> Acked-by:
Cyrill Gorcunov <gorcunov@openvz.org> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: Jamie Liu <jamieliu@google.com> Cc: Hugh Dickins <hughd@google.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Fabian Frederick authored
commit 6ff66ac7 upstream. Commit 0227d6ab ("fs/cachefiles: replace kerror by pr_err") didn't include newline featuring in original kerror definition Signed-off-by:
Fabian Frederick <fabf@skynet.be> Reported-by:
David Howells <dhowells@redhat.com> Acked-by:
-
David Rientjes authored
commit d4a5fca5 upstream. Since commit 45906855 ("mm/sl[aou]b: Common alignment code"), the "ralign" automatic variable in __kmem_cache_create() may be used as uninitialized. The proper alignment defaults to BYTES_PER_WORD and can be overridden by SLAB_RED_ZONE or the alignment specified by the caller. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=85031Signed-off-by:
David Rientjes <rientjes@google.com> Reported-by:
Andrei Elovikov <a.elovikov@gmail.com> Acked-by:
Christoph Lameter <cl@linux.com> Cc: Pekka Enberg <penberg@kernel.org> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by:
-
Joseph Qi authored
commit 5760a97c upstream. There is a deadlock case which reported by Guozhonghua: https://oss.oracle.com/pipermail/ocfs2-devel/2014-September/010079.html This case is caused by &res->spinlock and &dlm->master_lock misordering in different threads. It was introduced by commit 8d400b81 ("ocfs2/dlm: Clean up refmap helpers"). Since lockres is new, it doesn't not require the &res->spinlock. So remove it. Fixes: 8d400b81 ("ocfs2/dlm: Clean up refmap helpers") Signed-off-by:
Joseph Qi <joseph.qi@huawei.com> Reviewed-by:
joyce.xue <xuejiufei@huawei.com> Reported-by:
Guozhonghua <guozhonghua@h3c.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Mark Fasheh <mfasheh@suse.com> Signed-off-by:
-
Andreas Rohner authored
commit 56d7acc7 upstream. This bug leads to reproducible silent data loss, despite the use of msync(), sync() and a clean unmount of the file system. It is easily reproducible with the following script: ----------------[BEGIN SCRIPT]-------------------- mkfs.nilfs2 -f /dev/sdb mount /dev/sdb /mnt dd if=/dev/zero bs=1M count=30 of=/mnt/testfile umount /mnt mount /dev/sdb /mnt CHECKSUM_BEFORE="$(md5sum /mnt/testfile)" /root/mmaptest/mmaptest /mnt/testfile 30 10 5 sync CHECKSUM_AFTER="$(md5sum /mnt/testfile)" umount /mnt mount /dev/sdb /mnt CHECKSUM_AFTER_REMOUNT="$(md5sum /mnt/testfile)" umount /mnt echo "BEFORE MMAP:\t$CHECKSUM_BEFORE" echo "AFTER MMAP:\t$CHECKSUM_AFTER" echo "AFTER REMOUNT:\t$CHECKSUM_AFTER_REMOUNT" ----------------[END SCRIPT]-------------------- The mmaptest tool looks something like this (very simplified, with error checking removed): ----------------[BEGIN mmaptest]-------------------- data = mmap(NULL, file_size - file_offset, PROT_READ | PROT_WRITE, MAP_SHARED, fd, file_offset); for (i = 0; i < write_count; ++i) { memcpy(data + i * 4096, buf, sizeof(buf)); msync(data, file_size - file_offset, MS_SYNC)) } ----------------[END mmaptest]-------------------- The output of the script looks something like this: BEFORE MMAP: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile AFTER MMAP: 6604a1c31f10780331a6850371b3a313 /mnt/testfile AFTER REMOUNT: 281ed1d5ae50e8419f9b978aab16de83 /mnt/testfile So it is clear, that the changes done using mmap() do not survive a remount. This can be reproduced a 100% of the time. The problem was introduced in commit 136e8770 ("nilfs2: fix issue of nilfs_set_page_dirty() for page at EOF boundary"). If the page was read with mpage_readpage() or mpage_readpages() for example, then it has no buffers attached to it. In that case page_has_buffers(page) in nilfs_set_page_dirty() will be false. Therefore nilfs_set_file_dirty() is never called and the pages are never collected and never written to disk. This patch fixes the problem by also calling nilfs_set_file_dirty() if the page has no buffers attached to it. [akpm@linux-foundation.org: s/PAGE_SHIFT/PAGE_CACHE_SHIFT/] Signed-off-by:
Andreas Rohner <andreas.rohner@gmx.net> Tested-by:
Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Signed-off-by:
-
Andrey Vagin authored
commit 7e882481 upstream. Currently we handle only ENOSPC. In case of other errors the file_handle variable isn't filled properly and we will show a part of stack. Signed-off-by:
Andrey Vagin <avagin@openvz.org> Acked-by:
-
Andrey Vagin authored
commit 1fc98d11 upstream. MAX_HANDLE_SZ is equal to 128, but currently the size of pad is only 64 bytes, so exportfs_encode_inode_fh can return an error. Signed-off-by:
-
Rasmus Villemoes authored
commit acbbe6fb upstream. The C operator <= defines a perfectly fine total ordering on the set of values representable in a long. However, unlike its namesake in the integers, it is not translation invariant, meaning that we do not have "b <= c" iff "a+b <= a+c" for all a,b,c. This means that it is always wrong to try to boil down the relationship between two longs to a question about the sign of their difference, because the resulting relation [a LEQ b iff a-b <= 0] is neither anti-symmetric or transitive. The former is due to -LONG_MIN==LONG_MIN (take any two a,b with a-b = LONG_MIN; then a LEQ b and b LEQ a, but a != b). The latter can either be seen observing that x LEQ x+1 for all x, implying x LEQ x+1 LEQ x+2 ... LEQ x-1 LEQ x; or more directly with the simple example a=LONG_MIN, b=0, c=1, for which a-b < 0, b-c < 0, but a-c > 0. Note that it makes absolutely no difference that a transmogrying bijection has been applied before the comparison is done. In fact, had the obfuscation not been done, one could probably not observe the bug (assuming all values being compared always lie in one half of the address space, the mathematical value of a-b is always representable in a long). As it stands, one can easily obtain three file descriptors exhibiting the non-transitivity of kcmp(). Side note 1: I can't see that ensuring the MSB of the multiplier is set serves any purpose other than obfuscating the obfuscating code. Side note 2: #include <stdio.h> #include <stdlib.h> #include <string.h> #include <fcntl.h> #include <unistd.h> #include <assert.h> #include <sys/syscall.h> enum kcmp_type { KCMP_FILE, KCMP_VM, KCMP_FILES, KCMP_FS, KCMP_SIGHAND, KCMP_IO, KCMP_SYSVSEM, KCMP_TYPES, }; pid_t pid; int kcmp(pid_t pid1, pid_t pid2, int type, unsigned long idx1, unsigned long idx2) { return syscall(SYS_kcmp, pid1, pid2, type, idx1, idx2); } int cmp_fd(int fd1, int fd2) { int c = kcmp(pid, pid, KCMP_FILE, fd1, fd2); if (c < 0) { perror("kcmp"); exit(1); } assert(0 <= c && c < 3); return c; } int cmp_fdp(const void *a, const void *b) { static const int normalize[] = {0, -1, 1}; return normalize[cmp_fd(*(int*)a, *(int*)b)]; } #define MAX 100 /* This is plenty; I've seen it trigger for MAX==3 */ int main(int argc, char *argv[]) { int r, s, count = 0; int REL[3] = {0,0,0}; int fd[MAX]; pid = getpid(); while (count < MAX) { r = open("/dev/null", O_RDONLY); if (r < 0) break; fd[count++] = r; } printf("opened %d file descriptors\n", count); for (r = 0; r < count; ++r) { for (s = r+1; s < count; ++s) { REL[cmp_fd(fd[r], fd[s])]++; } } printf("== %d\t< %d\t> %d\n", REL[0], REL[1], REL[2]); qsort(fd, count, sizeof(fd[0]), cmp_fdp); memset(REL, 0, sizeof(REL)); for (r = 0; r < count; ++r) { for (s = r+1; s < count; ++s) { REL[cmp_fd(fd[r], fd[s])]++; } } printf("== %d\t< %d\t> %d\n", REL[0], REL[1], REL[2]); return (REL[0] + REL[2] != 0); } Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Reviewed-by:
-
Nicolas Iooss authored
commit c680e41b upstream. When calling epoll_ctl with operation EPOLL_CTL_DEL, structure epds is not initialized but ep_take_care_of_epollwakeup reads its event field. When this unintialized field has EPOLLWAKEUP bit set, a capability check is done for CAP_BLOCK_SUSPEND in ep_take_care_of_epollwakeup. This produces unexpected messages in the audit log, such as (on a system running SELinux): type=AVC msg=audit(1408212798.866:410): avc: denied { block_suspend } for pid=7754 comm="dbus-daemon" capability=36 scontext=unconfined_u:unconfined_r:unconfined_t tcontext=unconfined_u:unconfined_r:unconfined_t tclass=capability2 permissive=1 type=SYSCALL msg=audit(1408212798.866:410): arch=c000003e syscall=233 success=yes exit=0 a0=3 a1=2 a2=9 a3=7fffd4d66ec0 items=0 ppid=1 pid=7754 auid=1000 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=(none) ses=3 comm="dbus-daemon" exe="/usr/bin/dbus-daemon" subj=unconfined_u:unconfined_r:unconfined_t key=(null) ("arch=c000003e syscall=233 a1=2" means "epoll_ctl(op=EPOLL_CTL_DEL)") Remove use of epds in epoll_ctl when op == EPOLL_CTL_DEL. Fixes: 4d7e30d9 ("epoll: Add a flag, EPOLLWAKEUP, to prevent suspend while epoll events are ready") Signed-off-by:
Nicolas Iooss <nicolas.iooss_linux@m4x.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Arve Hjønnevåg <arve@android.com> Signed-off-by:
-
Patrick Palka authored
commit 000a7d66 upstream. We shouldn't set text_len in the code path that detects printk recursion because text_len corresponds to the length of the string inside textbuf. A few lines down from the line text_len = strlen(recursion_msg); is the line text_len += vscnprintf(text + text_len, ...); So if printk detects recursion, it sets text_len to 29 (the length of recursion_msg) and logs an error. Then the message supplied by the caller of printk is stored inside textbuf but offset by 29 bytes. This means that the output of the recursive call to printk will contain 29 bytes of garbage in front of it. This defect is caused by commit 458df9fd ("printk: remove separate printk_sched buffers and use printk buf instead") which turned the line text_len = vscnprintf(text, ...); into text_len += vscnprintf(text + text_len, ...); To fix this, this patch avoids setting text_len when logging the printk recursion error. This patch also marks unlikely() the branch leading up to this code. Fixes: 458df9fd ("printk: remove separate printk_sched buffers and use printk buf instead") Signed-off-by:
Patrick Palka <patrick@parcs.ath.cx> Reviewed-by:
Petr Mladek <pmladek@suse.cz> Reviewed-by:
Jan Kara <jack@suse.cz> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Johannes Berg authored
commit bb512ad0 upstream. This reverts commit 24aa11ab. That commit was wrong since it uses data that hasn't even been set up yet, but might be a hold-over from a previous connection. Additionally, it seems like a driver-specific workaround that shouldn't have been in mac80211 to start with. Fixes: 24aa11ab ("mac80211: disable uAPSD if all ACs are under ACM") Reviewed-by:
Luciano Coelho <luciano.coelho@intel.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 84261912 upstream. When updating what an ftrace_ops traces, if it is registered (that is, actively tracing), and that ftrace_ops uses the shared global_ops local_hash, then we need to update all tracers that are active and also share the global_ops' ftrace_hash_ops. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 5f151b24 upstream. The latest rewrite of ftrace removed the separate ftrace_ops of the function tracer and the function graph tracer and had them share the same ftrace_ops. This simplified the accounting by removing the multiple layers of functions called, where the global_ops func would call a special list that would iterate over the other ops that were registered within it (like function and function graph), which itself was registered to the ftrace ops list of all functions currently active. If that sounds confusing, the code that implemented it was also confusing and its removal is a good thing. The problem with this change was that it assumed that the function and function graph tracer can never be used at the same time. This is mostly true, but there is an exception. That is when the function profiler uses the function graph tracer to profile. The function profiler can be activated the same time as the function tracer, and this breaks the assumption and the result is that ftrace will crash (it detects the error and shuts itself down, it does not cause a kernel oops). To solve this issue, a previous change allowed the hash tables for the functions traced by a ftrace_ops to be a pointer and let multiple ftrace_ops share the same hash. This allows the function and function_graph tracer to have separate ftrace_ops, but still share the hash, which is what is done. Now the function and function graph tracers have separate ftrace_ops again, and the function tracer can be run while the function_profile is active. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 33b7f99c upstream. Currently the top level debug file system function tracer shares its ftrace_ops with the function graph tracer. This was thought to be fine because the tracers are not used together, as one can only enable function or function_graph tracer in the current_tracer file. But that assumption proved to be incorrect. The function profiler can use the function graph tracer when function tracing is enabled. Since all function graph users uses the function tracing ftrace_ops this causes a conflict and when a user enables both function profiling as well as the function tracer it will crash ftrace and disable it. The quick solution so far is to move them as separate ftrace_ops like it was earlier. The problem though is to synchronize the functions that are traced because both function and function_graph tracer are limited by the selections made in the set_ftrace_filter and set_ftrace_notrace files. To handle this, a new structure is made called ftrace_ops_hash. This structure will now hold the filter_hash and notrace_hash, and the ftrace_ops will point to this structure. That will allow two ftrace_ops to share the same hashes. Since most ftrace_ops do not share the hashes, and to keep allocation simple, the ftrace_ops structure will include both a pointer to the ftrace_ops_hash called func_hash, as well as the structure itself, called local_hash. When the ops are registered, the func_hash pointer will be initialized to point to the local_hash within the ftrace_ops structure. Some of the ftrace internal ftrace_ops will be initialized statically. This will allow for the function and function_graph tracer to have separate ops but still share the same hash tables that determine what functions they trace. Signed-off-by:
-
Felipe Balbi authored
commit 0b93a4c8 upstream. After commit 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) we created a situation where it was possible to hang a bulk/interrupt endpoint if we had more than one pending request in our queue and they were both started with a single Start Transfer command. The problems triggers because we had not enabled Transfer In Progress event for those endpoints and we were not able to process early giveback of requests completed without LST bit set. Fix the problem by finally enabling Xfer In Progress event for all endpoint types, except control. Fixes: 2ec2a8be (usb: dwc3: gadget: always enable IOC on bulk/interrupt transfers) Reported-by:
Pratyush Anand <pratyush.anand@st.com> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Jens Axboe authored
commit 46f341ff upstream. Commit 2da78092 changed the locking from a mutex to a spinlock, so we now longer sleep in this context. But there was a leftover might_sleep() in there, which now triggers since we do the final free from an RCU callback. Get rid of it. Reported-by:
Pontus Fuchs <pontus.fuchs@gmail.com> Signed-off-by:
Jens Axboe <axboe@fb.com> Signed-off-by:
-
Trond Myklebust authored
commit 22fdcf02 upstream. This commit reverts the addition of lockdep checking to raw_seqcount_begin for the following reasons: 1) It violates the naming convention that raw_* functions should not do lockdep checks (a convention that is also followed by the other raw_*_seqcount_begin functions). 2) raw_seqcount_begin does not spin, so it can only be part of an ABBA deadlock in very special circumstances (for instance if a lock is held across the entire raw_seqcount_begin()+read_seqcount_retry() loop while also being taken inside the write_seqcount protected area). 3) It is causing false positives with some existing callers, and there is no non-lockdep alternative for those callers to use. None of the three existing callers (__d_lookup_rcu, netdev_get_name, and the NFS state code) appear to use the function in a manner that is ABBA deadlock prone. Fixes: 1ca7d67c: seqcount: Add lockdep functionality to seqcount/seqlock Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Peter Zijlstra <peterz@infradead.org> Cc: John Stultz <john.stultz@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Waiman Long <Waiman.Long@hp.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/CAHQdGtRR6SvEhXiqWo24hoUh9AU9cL82Z8Z-d8-7u951F_d+5g@mail.gmail.comSigned-off-by:
-
J. Bruce Fields authored
commit 7c17705e upstream. Nikita Yuschenko reported that booting a kernel with init=/bin/sh and then nfs mounting without portmap or rpcbind running using a busybox mount resulted in: # mount -t nfs 10.30.130.21:/opt /mnt svc: failed to register lockdv1 RPC service (errno 111). lockd_up: makesock failed, error=-111 Unable to handle kernel paging request for data at address 0x00000030 Faulting instruction address: 0xc055e65c Oops: Kernel access of bad area, sig: 11 [#1] MPC85xx CDS Modules linked in: CPU: 0 PID: 1338 Comm: mount Not tainted 3.10.44.cge #117 task: cf29cea0 ti: cf35c000 task.ti: cf35c000 NIP: c055e65c LR: c0566490 CTR: c055e648 REGS: cf35dad0 TRAP: 0300 Not tainted (3.10.44.cge) MSR: 00029000 <CE,EE,ME> CR: 22442488 XER: 20000000 DEAR: 00000030, ESR: 00000000 GPR00: c05606f4 cf35db80 cf29cea0 cf0ded80 cf0dedb8 00000001 1dec3086 00000000 GPR08: 00000000 c07b1640 00000007 1dec3086 22442482 100b9758 00000000 10090ae8 GPR16: 00000000 000186a5 00000000 00000000 100c3018 bfa46edc 100b0000 bfa46ef0 GPR24: cf386ae0 c07834f0 00000000 c0565f88 00000001 cf0dedb8 00000000 cf0ded80 NIP [c055e65c] call_start+0x14/0x34 LR [c0566490] __rpc_execute+0x70/0x250 Call Trace: [cf35db80] [00000080] 0x80 (unreliable) [cf35dbb0] [c05606f4] rpc_run_task+0x9c/0xc4 [cf35dbc0] [c0560840] rpc_call_sync+0x50/0xb8 [cf35dbf0] [c056ee90] rpcb_register_call+0x54/0x84 [cf35dc10] [c056f24c] rpcb_register+0xf8/0x10c [cf35dc70] [c0569e18] svc_unregister.isra.23+0x100/0x108 [cf35dc90] [c0569e38] svc_rpcb_cleanup+0x18/0x30 [cf35dca0] [c0198c5c] lockd_up+0x1dc/0x2e0 [cf35dcd0] [c0195348] nlmclnt_init+0x2c/0xc8 [cf35dcf0] [c015bb5c] nfs_start_lockd+0x98/0xec [cf35dd20] [c015ce6c] nfs_create_server+0x1e8/0x3f4 [cf35dd90] [c0171590] nfs3_create_server+0x10/0x44 [cf35dda0] [c016528c] nfs_try_mount+0x158/0x1e4 [cf35de20] [c01670d0] nfs_fs_mount+0x434/0x8c8 [cf35de70] [c00cd3bc] mount_fs+0x20/0xbc [cf35de90] [c00e4f88] vfs_kern_mount+0x50/0x104 [cf35dec0] [c00e6e0c] do_mount+0x1d0/0x8e0 [cf35df10] [c00e75ac] SyS_mount+0x90/0xd0 [cf35df40] [c000ccf4] ret_from_syscall+0x0/0x3c The addition of svc_shutdown_net() resulted in two calls to svc_rpcb_cleanup(); the second is no longer necessary and crashes when it calls rpcb_register_call with clnt=NULL. Reported-by:
Nikita Yushchenko <nyushchenko@dev.rtsoft.ru> Fixes: 679b033d "lockd: ensure we tear down any live sockets when socket creation fails during lockd_up" Acked-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Larry Finger authored
commit c6651716 upstream. The Sitecom WLA-2102 adapter uses this driver. Reported-by:
Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: Nico Baggus <nico-linux@noci.xs4all.nl> Signed-off-by:
-
