- 14 Dec, 2021 8 commits
-
-
David Mosberger-Tang authored
The messages appears to have been copied from wilc_get_mac_address and says "get" when it should say "set". Signed-off-by:
David Mosberger-Tang <davidm@egauge.net> Signed-off-by:
Kalle Valo <kvalo@kernel.org> Link: https://lore.kernel.org/r/20211206232709.3192856-2-davidm@egauge.net
-
Ching-Te Ku authored
Update COEX version. Signed-off-by:
Ching-Te Ku <ku920601@realtek.com> Signed-off-by:
Ping-Ke Shih <pkshih@realtek.com> Signed-off-by:
-
Ching-Te Ku authored
It's unnecessary to leave WL PS while C2H comes. Signed-off-by:
-
Ching-Te Ku authored
Move _chk_btc_err and update_bt_cnt to _chk_btc_report(), so we can update counter/info to COEX at a proper moment, instead of relying on a user does cat the debug info periodically. Signed-off-by:
-
Ching-Te Ku authored
To distinguish three types of LPS state. Signed-off-by:
-
Ching-Te Ku authored
Add function to get and parse BT polluted counter. When WLAN Tx was dropped by BT, the packet will be marked as BT polluted. Signed-off-by:
-
Ching-Te Ku authored
Prevent to send H2C request to FW when BTC is not initialized or WL is under power saving. Add counter to count the H2C success or fail. Signed-off-by:
-
Ching-Te Ku authored
To resolve C2H handle length mismatch, or it will parse the c2h content out of array. Signed-off-by:
-
- 13 Dec, 2021 1 commit
-
-
Loic Poulain authored
cpu_to_le16 has been used for all keep-alive fields, but 'perdio_msec' is a 32-bit field and 'keep_alive_id' a 8-bit one. Fix that. Fixes: 7a6cfe28 ("brcmfmac: Configure keep-alive packet on suspend") Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Loic Poulain <loic.poulain@linaro.org> Signed-off-by:
-
- 08 Dec, 2021 31 commits
-
-
Kees Cook authored
The earlier __packed annotations added in commit d71038c0 ("libertas: Fix alignment issues in libertas core") were not duplicated when libertas_af was added in commit 7670e62c ("libertas_tf: header file"), even though they share several structure definitions. Add the missing annotations which commit 642a5747 ("libertas_tf: Use struct_group() for memcpy() region") exposed. Quoting the prior libertas fix: "Data structures that come over the wire from the WLAN firmware must be packed." Reported-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Kees Cook authored
Build testing of the newly added struct_group() usage missed smaller architecture width tests for changes to pahole output. Add the missed __packed annotation with struct_group() usage in a __packed struct. Reported-by:
-
Brian Norris authored
Quoting Jia-Ju Bai <baijiaju1990@gmail.com>: mwifiex_dequeue_tx_packet() spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 1432 (Lock A) mwifiex_send_addba() spin_lock_bh(&priv->sta_list_spinlock); --> Line 608 (Lock B) mwifiex_process_sta_tx_pause() spin_lock_bh(&priv->sta_list_spinlock); --> Line 398 (Lock B) mwifiex_update_ralist_tx_pause() spin_lock_bh(&priv->wmm.ra_list_spinlock); --> Line 941 (Lock A) Similar report for mwifiex_process_uap_tx_pause(). While the locking expectations in this driver are a bit unclear, the Fixed commit only intended to protect the sta_ptr, so we can drop the lock as soon as we're done with it. IIUC, this deadlock cannot actually happen, because command event processing (which calls mwifiex_process_sta_tx_pause()) is sequentialized with TX packet processing (e.g., mwifiex_dequeue_tx_packet()) via the main loop (mwifiex_main_process()). But it's good not to leave this potential issue lurking. Fixes: f0f7c227 ("mwifiex: minor cleanups w/ sta_list_spinlock in cfg80211.c") Cc: Douglas Anderson <dianders@chromium.org> Reported-by:TOTE Robot <oslab@tsinghua.edu.cn> Link: https://lore.kernel.org/linux-wireless/0e495b14-efbb-e0da-37bd-af6bd677ee2c@gmail.com/Signed-off-by:
Brian Norris <briannorris@chromium.org> Reviewed-by:
Douglas Anderson <dianders@chromium.org> Signed-off-by:
-
David Mosberger-Tang authored
This eliminates warning message: SPI driver WILC_SPI has no spi_device_id for microchip,wilc1000 and makes device-tree autoloading work. Signed-off-by:
-
Ping-Ke Shih authored
This is found by Smatch static checker warning: drivers/net/wireless/realtek/rtw89/mac80211.c:31 rtw89_ops_tx() error: uninitialized symbol 'qsel'. The warning is because 'qsel' isn't filled by rtw89_core_tx_write() due to failed to write. The way to fix it is to avoid kicking off TX DMA, so add 'return' to the failure case. Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Zong-Zhe Yang authored
Originally, cch_by_bw recorded center channels of each available bandwidths under current bandwidth. And the plan was to iterate cch_by_bw as parameters to query other configurations. However, we have not used it for the time being. Keeping it will disturb the follow-up things, such as bandwidth 160 MHz, so we remove it for now. If it's really needed at some point, we will redesign it. Signed-off-by:
Zong-Zhe Yang <kevin_yang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
With wrong rtwsta->mac_id, it can't send out ack properly when we receive assoc response occasionally. Then, it failed to connect an AP. The cause is that we store 'sta' and use it somewhere. To correct this, remove the variable and use mac_id in drv_priv of 'sta' or 'vif' passed by mac80211. Signed-off-by:
-
Zong-Zhe Yang authored
Show channel and bandwidth in debugfs tx_pwr_tbl to make it easier to understand which tx power table is shown currently, and to reduce additional checks through other ways. Signed-off-by:
-
Yan-Hsuan Chuang authored
It is useful to fix the bit rate of TX packets. For example, if someone is measuring the TX power, or debugging with the issues of the TX throughput on the field. To set the value of fixed rate, one should input corresponding desc rate index (ex, 0x0b for DESC_RATE54M to fix at 54 Mbps). Set a value larger than DESC_RATE_MAX will disable fix rate, so the rate adaptive mechanism can resume to work. Example, To fix rate at MCS 1: echo 0x0d > /sys/kernel/debug/ieee80211/phy0/rtw88/fix_rate To not to fix rate: echo 0xff > /sys/kernel/debug/ieee80211/phy0/rtw88/fix_rate To know which rate was fixed at: cat /sys/kernel/debug/ieee80211/phy0/rtw88/fix_rate Signed-off-by:
Yan-Hsuan Chuang <yhchuang@realtek.com> Signed-off-by:
-
Po Hao Huang authored
We used to fill in rx skbs' frequency field by mac80211's current channel value. In some cases, mac80211 switches channel before all rx packets have been processed. This results in incorrect bss info. We fix this by filling in frequency field with channel index obtained from hardware, then fix potential cck missing issue by skb's original hw rate. After all fix is done, convert hw rate back to the supported band rate index. Signed-off-by:
Po Hao Huang <phhuang@realtek.com> Signed-off-by:
-
Ping-Ke Shih authored
Update scan_mac_addr to address CAM as A1, so hardware can ACK probe response properly. Signed-off-by:
-
Ping-Ke Shih authored
In order to use compiler to check if we do improper cast of const* on arguments of inline function. Signed-off-by:
Takashi Iwai <tiwai@suse.de> Tested-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Ping-Ke Shih authored
Add 'const' to be clear that this is a read-only access, and this patch doesn't change logic at all. Signed-off-by:
-
Jakub Kicinski authored
Alexandra Winter says: ==================== s390/net: updates 2021-12-06 This brings some maintenance improvements and removes some unnecessary code checks. ==================== Link: https://lore.kernel.org/r/20211207090452.1155688-1-wintera@linux.ibm.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Julian Wiedmann authored
If qeth_check_outbound_queue() finds a partially filled TX buffer on the queue and flushes it, then the queue _must_ have been in packing mode. Remove the redundant check when updating the relevant statistics. Signed-off-by:
Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by:
Alexandra Winter <wintera@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Avoid a conditional branch for L2 devices when selecting the TX queue, and have shared logic for OSA devices. Signed-off-by:
-
Julian Wiedmann authored
qeth_l2_detect_dev2br_support() will only set brport_hw_features for IQD devices. So qeth_l2_bridge_getlink() and qeth_l2_bridge_setlink() will always return -EOPNOTSUPP on OSA devices. Just don't offer these callbacks instead. Signed-off-by:
-
Julian Wiedmann authored
Splitting up the netdev_ops allows for fine-tuning some of the ndo's in subsequent patches. Signed-off-by:
Wenjia Zhang <wenjia@linux.ibm.com> Signed-off-by:
-
Julian Wiedmann authored
Now that the OSN code is gone, we don't need the second switch statement in the RX path. And getting rid of its (unreachable) default case is a nice simplification. Also don't pass in the full HW header, all we still need is a flag to indicate whether the skb can use CSO. This we can already obtain during the first peek at the HW header. Signed-off-by:
-
Kees Cook authored
When building under -Warray-bounds, the compiler is especially conservative when faced with casts from a smaller object to a larger object. While this has found many real bugs, there are some cases that are currently false positives (like here). With this as one of the last few instances of the warning in the kernel before -Warray-bounds can be enabled globally, rearrange the functions so that there is a header-only version of hvs_send_data(). Silences this warning: net/vmw_vsock/hyperv_transport.c: In function 'hvs_shutdown_lock_held.constprop': net/vmw_vsock/hyperv_transport.c:231:32: warning: array subscript 'struct hvs_send_buf[0]' is partly outside array bounds of 'struct vmpipe_proto_header[1]' [-Warray-bounds] 231 | send_buf->hdr.pkt_type = 1; | ~~~~~~~~~~~~~~~~~~~~~~~^~~ net/vmw_vsock/hyperv_transport.c:465:36: note: while referencing 'hdr' 465 | struct vmpipe_proto_header hdr; | ^~~ This change results in no executable instruction differences. Signed-off-by:Wei Liu <wei.liu@kernel.org> Link: https://lore.kernel.org/r/20211207063217.2591451-1-keescook@chromium.orgSigned-off-by:
-
Yihao Han authored
Fix following coccicheck warning: /drivers/net/dsa/ocelot/felix_vsc9959.c:1627:13-20: WARNING opportunity for kmemdup /drivers/net/dsa/ocelot/felix_vsc9959.c:1506:16-23: WARNING opportunity for kmemdup Signed-off-by:
Yihao Han <hanyihao@vivo.com> Reviewed-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Link: https://lore.kernel.org/r/20211207064419.38632-1-hanyihao@vivo.comSigned-off-by:
-
Jakub Kicinski authored
Colin Foster says: ==================== prepare ocelot for external interface control This patch set is derived from an attempt to include external control for a VSC751[1234] chip via SPI. That patch set has grown large and is getting unwieldy for reviewers and the developers... me. I'm breaking out the changes from that patch set. Some are trivial net: dsa: ocelot: remove unnecessary pci_bar variables net: dsa: ocelot: felix: Remove requirement for PCS in felix devices some are required for SPI net: dsa: ocelot: felix: add interface for custom regmaps and some are just to expose code to be shared net: mscc: ocelot: split register definitions to a separate file The entirety of this patch set should have essentially no impact on the system performance. ==================== Link: https://lore.kernel.org/r/20211207170030.1406601-1-colin.foster@in-advantage.comSigned-off-by:
-
Colin Foster authored
Move these to a separate file will allow them to be shared to other drivers. Signed-off-by:
Colin Foster <colin.foster@in-advantage.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Colin Foster authored
Add an interface so that non-mmio regmaps can be used Signed-off-by:
-
Colin Foster authored
Existing felix devices all have an initialized pcs array. Future devices might not, so running a NULL check on the array before dereferencing it will allow those future drivers to not crash at this point Signed-off-by:
-
Colin Foster authored
The pci_bar variables for the switch and imdio don't make sense for the generic felix driver. Moving them to felix_vsc9959 to limit scope and simplify the felix_info struct. Signed-off-by:
-
Colin Ian King authored
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20211206091207.113648-1-colin.i.king@gmail.comSigned-off-by:
-
Jakub Kicinski authored
Merge tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next Kalle Valo says: ==================== wireless-drivers-next patches for v5.17 First set of patches for v5.17. The biggest change is the iwlmei driver for Intel's AMT devices. Also now WCN6855 support in ath11k should be usable. Major changes: ath10k * fetch (pre-)calibration data via nvmem subsystem ath11k * enable 802.11 power save mode in station mode for qca6390 and wcn6855 * trace log support * proper board file detection for WCN6855 based on PCI ids * BSS color change support rtw88 * add debugfs file to force lowest basic rate * add quirk to disable PCI ASPM on HP 250 G7 Notebook PC mwifiex * add quirk to disable deep sleep with certain hardware revision in Surface Book 2 devices iwlwifi * add iwlmei driver for co-operating with Intel's Active Management Technology (AMT) devices * tag 'wireless-drivers-next-2021-12-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (87 commits) iwlwifi: mei: fix linking when tracing is not enabled rtlwifi: rtl8192de: Style clean-ups mwl8k: Use named struct for memcpy() region intersil: Use struct_group() for memcpy() region libertas_tf: Use struct_group() for memcpy() region libertas: Use struct_group() for memcpy() region wlcore: no need to initialise statics to false rsi: Fix out-of-bounds read in rsi_read_pkt() rsi: Fix use-after-free in rsi_rx_done_handler() brcmfmac: Configure keep-alive packet on suspend wilc1000: remove '-Wunused-but-set-variable' warning in chip_wakeup() iwlwifi: mvm: read the rfkill state and feed it to iwlmei iwlwifi: mvm: add vendor commands needed for iwlmei iwlwifi: integrate with iwlmei iwlwifi: mei: add debugfs hooks iwlwifi: mei: add the driver to allow cooperation with CSME mei: bus: add client dma interface mwifiex: Ignore BTCOEX events from the 88W8897 firmware mwifiex: Ensure the version string from the firmware is 0-terminated mwifiex: Add quirk to disable deep sleep with certain hardware revision ... ==================== Link: https://lore.kernel.org/r/20211207144211.A9949C341C1@smtp.kernel.orgSigned-off-by:
-
Jakub Kicinski authored
Eric Dumazet says: ==================== net: second round of netdevice refcount tracking The most interesting part of this series is probably ("inet: add net device refcount tracker to struct fib_nh_common") but only future reports will confirm this guess. ==================== Link: https://lore.kernel.org/r/20211207013039.1868645-1-eric.dumazet@gmail.comSigned-off-by: -
Eric Dumazet authored
Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Signed-off-by:
-
