- 22 May, 2015 10 commits
-
-
Arun Parameswaran authored
When trying to configure the settings for PHY1, using commands like 'ethtool -s eth0 phyad 1 speed 100', the 'ethtool' seems to modify other settings apart from the speed of the PHY1, in the above case. The ethtool seems to query the settings for PHY0, and use this as the base to apply the new settings to the PHY1. This is causing the other settings of the PHY 1 to be wrongly configured. The issue is caused by the '_ethtool_get_settings()' API, which gets called because of the 'ETHTOOL_GSET' command, is clearing the 'cmd' pointer (of type 'struct ethtool_cmd') by calling memset. This clears all the parameters (if any) passed for the 'ETHTOOL_GSET' cmd. So the driver's callback is always invoked with 'cmd->phy_address' as '0'. The '_ethtool_get_settings()' is called from other files in the 'net/core'. So the fix is applied to the 'ethtool_get_settings()' which is only called in the context of the 'ethtool'. Signed-off-by:
Arun Parameswaran <aparames@broadcom.com> Reviewed-by:
Ray Jui <rjui@broadcom.com> Reviewed-by:
Scott Branden <sbranden@broadcom.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Thadeu Lima de Souza Cascardo authored
When more than a multicast address is present in a MLDv2 report, all but the first address is ignored, because the code breaks out of the loop if there has not been an error adding that address. This has caused failures when two guests connected through the bridge tried to communicate using IPv6. Neighbor discoveries would not be transmitted to the other guest when both used a link-local address and a static address. This only happens when there is a MLDv2 querier in the network. The fix will only break out of the loop when there is a failure adding a multicast address. The mdb before the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::2 temp After the patch: dev ovirtmgmt port vnet0 grp ff02::1:ff7d:6603 temp dev ovirtmgmt port vnet1 grp ff02::1:ff7d:6604 temp dev ovirtmgmt port bond0.86 grp ff02::fb temp dev ovirtmgmt port bond0.86 grp ff02::2 temp dev ovirtmgmt port bond0.86 grp ff02::d temp dev ovirtmgmt port vnet0 grp ff02::1:ff00:76 temp dev ovirtmgmt port bond0.86 grp ff02::16 temp dev ovirtmgmt port vnet1 grp ff02::1:ff00:77 temp dev ovirtmgmt port bond0.86 grp ff02::1:ff00:def temp dev ovirtmgmt port bond0.86 grp ff02::1:ffa1:40bf temp Fixes: 08b202b6 ("bridge br_multicast: IPv6 MLD support.") Reported-by:
Rik Theys <Rik.Theys@esat.kuleuven.be> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@redhat.com> Tested-by:
-
Nathan Sullivan authored
Use the new zynq binding for macb ethernet, since it will disable half duplex gigabit like the Zynq TRM says to do. Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
-
Nathan Sullivan authored
According to the Zynq TRM, gigabit half duplex is not supported. Add a new cap and compatible string so Zynq can avoid advertising that mode. Signed-off-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by:
-
Nathan Sullivan authored
Signed-off-by:
-
Michal Kubeček authored
When replacing an IPv4 route, tb_id member of the new fib_alias structure is not set in the replace code path so that the new route is ignored. Fixes: 0ddcf43d ("ipv4: FIB Local/MAIN table collapse") Signed-off-by:
Michal Kubecek <mkubecek@suse.cz> Acked-by:
Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by:
-
Bjørn Mork authored
The tx_curr_frame_payload field is u32. When we try to calculate a small negative delta based on it, we end up with a positive integer close to 2^32 instead. So the tx_bytes pointer increases by about 2^32 for every transmitted frame. Fix by calculating the delta as a signed long. Cc: Ben Hutchings <ben.hutchings@codethink.co.uk> Reported-by:
Florian Bruhin <me@the-compiler.org> Fixes: 7a1e890e ("usbnet: Fix tx_bytes statistic running backward in cdc_ncm") Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contain Netfilter fixes for your net tree, they are: 1) Fix a race in nfnetlink_log and nfnetlink_queue that can lead to a crash. This problem is due to wrong order in the per-net registration and netlink socket events. Patch from Francesco Ruggeri. 2) Make sure that counters that userspace pass us are higher than 0 in all the x_tables frontends. Discovered via Trinity, patch from Dave Jones. 3) Revert a patch for br_netfilter to rely on the conntrack status bits. This breaks stateless IPv6 NAT transformations. Patch from Florian Westphal. ==================== Signed-off-by: -
Eric W. Biederman authored
ip_error does not check if in_dev is NULL before dereferencing it. IThe following sequence of calls is possible: CPU A CPU B ip_rcv_finish ip_route_input_noref() ip_route_input_slow() inetdev_destroy() dst_input() With the result that a network device can be destroyed while processing an input packet. A crash was triggered with only unicast packets in flight, and forwarding enabled on the only network device. The error condition was created by the removal of the network device. As such it is likely the that error code was -EHOSTUNREACH, and the action taken by ip_error (if in_dev had been accessible) would have been to not increment any counters and to have tried and likely failed to send an icmp error as the network device is going away. Therefore handle this weird case by just dropping the packet if !in_dev. It will result in dropping the packet sooner, and will not result in an actual change of behavior. Fixes: 251da413 ("ipv4: Cache ip_error() routes even when not forwarding.") Reported-by:Vittorio Gambaletta <linuxbugs@vittgam.net> Tested-by:
"Eric W. Biederman" <ebiederm@xmission.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
Taking socket spinlock in tcp_get_info() can deadlock, as inet_diag_dump_icsk() holds the &hashinfo->ehash_locks[i], while packet processing can use the reverse locking order. We could avoid this locking for TCP_LISTEN states, but lockdep would certainly get confused as all TCP sockets share same lockdep classes. [ 523.722504] ====================================================== [ 523.728706] [ INFO: possible circular locking dependency detected ] [ 523.734990] 4.1.0-dbg-DEV #1676 Not tainted [ 523.739202] ------------------------------------------------------- [ 523.745474] ss/18032 is trying to acquire lock: [ 523.750002] (slock-AF_INET){+.-...}, at: [<ffffffff81669d44>] tcp_get_info+0x2c4/0x360 [ 523.758129] [ 523.758129] but task is already holding lock: [ 523.763968] (&(&hashinfo->ehash_locks[i])->rlock){+.-...}, at: [<ffffffff816bcb75>] inet_diag_dump_icsk+0x1d5/0x6c0 [ 523.774661] [ 523.774661] which lock already depends on the new lock. [ 523.774661] [ 523.782850] [ 523.782850] the existing dependency chain (in reverse order) is: [ 523.790326] -> #1 (&(&hashinfo->ehash_locks[i])->rlock){+.-...}: [ 523.796599] [<ffffffff811126bb>] lock_acquire+0xbb/0x270 [ 523.802565] [<ffffffff816f5868>] _raw_spin_lock+0x38/0x50 [ 523.808628] [<ffffffff81665af8>] __inet_hash_nolisten+0x78/0x110 [ 523.815273] [<ffffffff816819db>] tcp_v4_syn_recv_sock+0x24b/0x350 [ 523.822067] [<ffffffff81684d41>] tcp_check_req+0x3c1/0x500 [ 523.828199] [<ffffffff81682d09>] tcp_v4_do_rcv+0x239/0x3d0 [ 523.834331] [<ffffffff816842fe>] tcp_v4_rcv+0xa8e/0xc10 [ 523.840202] [<ffffffff81658fa3>] ip_local_deliver_finish+0x133/0x3e0 [ 523.847214] [<ffffffff81659a9a>] ip_local_deliver+0xaa/0xc0 [ 523.853440] [<ffffffff816593b8>] ip_rcv_finish+0x168/0x5c0 [ 523.859624] [<ffffffff81659db7>] ip_rcv+0x307/0x420 Lets use u64_sync infrastructure instead. As a bonus, 64bit arches get optimized, as these are nop for them. Fixes: 0df48c26 ("tcp: add tcpi_bytes_acked to tcp_info") Signed-off-by:
-
- 21 May, 2015 1 commit
-
-
Daniel Borkmann authored
Vijay reported that a loop as simple as ... while true; do tc qdisc add dev foo root handle 1: prio tc filter add dev foo parent 1: u32 match u32 0 0 flowid 1 tc qdisc del dev foo root rmmod cls_u32 done ... will panic the kernel. Moreover, he bisected the change apparently introducing it to 78fd1d0a ("netlink: Re-add locking to netlink_lookup() and seq walker"). The removal of synchronize_net() from the netlink socket triggering the qdisc to be removed, seems to have uncovered an RCU resp. module reference count race from the tc API. Given that RCU conversion was done after e341694e ("netlink: Convert netlink_lookup() to use RCU protected hash table") which added the synchronize_net() originally, occasion of hitting the bug was less likely (not impossible though): When qdiscs that i) support attaching classifiers and, ii) have at least one of them attached, get deleted, they invoke tcf_destroy_chain(), and thus call into ->destroy() handler from a classifier module. After RCU conversion, all classifier that have an internal prio list, unlink them and initiate freeing via call_rcu() deferral. Meanhile, tcf_destroy() releases already reference to the tp->ops->owner module before the queued RCU callback handler has been invoked. Subsequent rmmod on the classifier module is then not prevented since all module references are already dropped. By the time, the kernel invokes the RCU callback handler from the module, that function address is then invalid. One way to fix it would be to add an rcu_barrier() to unregister_tcf_proto_ops() to wait for all pending call_rcu()s to complete. synchronize_rcu() is not appropriate as under heavy RCU callback load, registered call_rcu()s could be deferred longer than a grace period. In case we don't have any pending call_rcu()s, the barrier is allowed to return immediately. Since we came here via unregister_tcf_proto_ops(), there are no users of a given classifier anymore. Further nested call_rcu()s pointing into the module space are not being done anywhere. Only cls_bpf_delete_prog() may schedule a work item, to unlock pages eventually, but that is not in the range/context of cls_bpf anymore. Fixes: 25d8c0d5 ("net: rcu-ify tcf_proto") Fixes: 9888faef ("net: sched: cls_basic use RCU") Reported-by:Vijay Subramanian <subramanian.vijay@gmail.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Thomas Graf <tgraf@suug.ch> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Alexei Starovoitov <ast@plumgrid.com> Tested-by:
Alexei Starovoitov <ast@plumgrid.com> Acked-by:
-
- 20 May, 2015 7 commits
-
-
Tim Beale authored
This is an alternative way of fixing: commit db9683fb ("net: phy: Make sure PHY_RESUMING state change is always processed") When the PHY state transitions from PHY_HALTED to PHY_RESUMING, there are two things we need to do: 1). Re-enable interrupts (and power up the physical link, if powered down) 2). Update the PHY state and net-device based on the link status. There's no strict reason why #1 has to be done from within the main phy_state_machine() function. There is a risk that other changes to the PHY (e.g. setting speed/duplex, which calls phy_start_aneg()) could cause a subsequent state transition before phy_state_machine() has processed the PHY_RESUMING state change. This would leave the PHY with interrupts disabled and/or still in the BMCR_PDOWN/low-power mode. Moving enabling the interrupts and phy_resume() into phy_start() will guarantee this work always gets done. As the PHY is already in the HALTED state and interrupts are disabled, it shouldn't conflict with any work being done in phy_state_machine(). The downside of this change is that if the PHY_RESUMING state is ever entered from anywhere else, it'll also have to repeat this work. Signed-off-by:
Tim Beale <tim.beale@alliedtelesis.co.nz> Signed-off-by:
-
David S. Miller authored
Michal Kubecek says: ==================== IPv6 ECMP route add/replace fixes (1) When adding a nexthop of a multipath route fails (e.g. because of a conflict with an existing route), we are supposed to delete nexthops already added. However, currently we try to also delete all nexthops we haven't even tried to add yet so that a "ip route add" command can actually remove pre-existing routes if it fails. (2) Attempt to replace a multipath route results in a broken siblings linked list. Following commands (like "ip route del") can then either follow a link into freed memory or end in an infinite loop (if the slab object has been reused). v2: fix an omission in first patch v3: change the semantics of replace operation to better match IPv4 ==================== Signed-off-by: -
Michal Kubeček authored
When replacing an IPv6 multipath route with "ip route replace", i.e. NLM_F_CREATE | NLM_F_REPLACE, fib6_add_rt2node() replaces only first matching route without fixing its siblings, resulting in corrupted siblings linked list; removing one of the siblings can then end in an infinite loop. IPv6 ECMP implementation is a bit different from IPv4 so that route replacement cannot work in exactly the same way. This should be a reasonable approximation: 1. If the new route is ECMP-able and there is a matching ECMP-able one already, replace it and all its siblings (if any). 2. If the new route is ECMP-able and no matching ECMP-able route exists, replace first matching non-ECMP-able (if any) or just add the new one. 3. If the new route is not ECMP-able, replace first matching non-ECMP-able route (if any) or add the new route. We also need to remove the NLM_F_REPLACE flag after replacing old route(s) by first nexthop of an ECMP route so that each subsequent nexthop does not replace previous one. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by:
-
Michal Kubeček authored
If adding a nexthop of an IPv6 multipath route fails, comment in ip6_route_multipath() says we are going to delete all nexthops already added. However, current implementation deletes even the routes it hasn't even tried to add yet. For example, running ip route add 1234:5678::/64 \ nexthop via fe80::aa dev dummy1 \ nexthop via fe80::bb dev dummy1 \ nexthop via fe80::cc dev dummy1 twice results in removing all routes first command added. Limit the second (delete) run to nexthops that succeeded in the first (add) run. Fixes: 51ebd318 ("ipv6: add support of equal cost multipath (ECMP)") Signed-off-by: -
Florian Westphal authored
This reverts commit c055d5b0. There are two issues: 'dnat_took_place' made me think that this is related to -j DNAT/MASQUERADE. But thats only one part of the story. This is also relevant for SNAT when we undo snat translation in reverse/reply direction. Furthermore, I originally wanted to do this mainly to avoid storing ipv6 addresses once we make DNAT/REDIRECT work for ipv6 on bridges. However, I forgot about SNPT/DNPT which is stateless. So we can't escape storing address for ipv6 anyway. Might as well do it for ipv4 too. Reported-and-tested-by:
Bernhard Thaler <bernhard.thaler@wvnet.at> Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
Dave Jones authored
After improving setsockopt() coverage in trinity, I started triggering vmalloc failures pretty reliably from this code path: warn_alloc_failed+0xe9/0x140 __vmalloc_node_range+0x1be/0x270 vzalloc+0x4b/0x50 __do_replace+0x52/0x260 [ip_tables] do_ipt_set_ctl+0x15d/0x1d0 [ip_tables] nf_setsockopt+0x65/0x90 ip_setsockopt+0x61/0xa0 raw_setsockopt+0x16/0x60 sock_common_setsockopt+0x14/0x20 SyS_setsockopt+0x71/0xd0 It turns out we don't validate that the num_counters field in the struct we pass in from userspace is initialized. The same problem also exists in ebtables, arptables, ipv6, and the compat variants. Signed-off-by:
Dave Jones <davej@codemonkey.org.uk> Signed-off-by:
-
Francesco Ruggeri authored
nfnetlink_{log,queue}_init() register the netlink callback nf*_rcv_nl_event before registering the pernet_subsys, but the callback relies on data structures allocated by pernet init functions. When nfnetlink_{log,queue} is loaded, if a netlink message is received after the netlink callback is registered but before the pernet_subsys is registered, the kernel will panic in the sequence nfulnl_rcv_nl_event nfnl_log_pernet net_generic BUG_ON(id == 0) where id is nfnl_log_net_id. The panic can be easily reproduced in 4.0.3 by: while true ;do modprobe nfnetlink_log ; rmmod nfnetlink_log ; done & while true ;do ip netns add dummy ; ip netns del dummy ; done & This patch moves register_pernet_subsys to earlier in nfnetlink_log_init. Notice that the BUG_ON hit in 4.0.3 was recently removed in 2591ffd3 ["netns: remove BUG_ONs from net_generic()"]. Signed-off-by:Francesco Ruggeri <fruggeri@arista.com> Signed-off-by:
-
- 19 May, 2015 5 commits
-
-
David S. Miller authored
Merge tag 'mac80211-for-davem-2015-05-19' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== This has just a single fix, for a WEP tailroom check problem that leads to dropped frames. ==================== Signed-off-by:
-
Yuchung Cheng authored
After sending the new data packets to probe (step 2), F-RTO may incorrectly send more probes if the next ACK advances SND_UNA and does not sack new packet. However F-RTO RFC 5682 probes at most once. This bug may cause sender to always send new data instead of repairing holes, inducing longer HoL blocking on the receiver for the application. Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
-
Yuchung Cheng authored
Undo based on TCP timestamps should only happen on ACKs that advance SND_UNA, according to the Eifel algorithm in RFC 3522: Section 3.2: (4) If the value of the Timestamp Echo Reply field of the acceptable ACK's Timestamps option is smaller than the value of RetransmitTS, then proceed to step (5), Section Terminology: We use the term 'acceptable ACK' as defined in [RFC793]. That is an ACK that acknowledges previously unacknowledged data. This is because upon receiving an out-of-order packet, the receiver returns the last timestamp that advances RCV_NXT, not the current timestamp of the packet in the DUPACK. Without checking the flag, the DUPACK will cause tcp_packet_delayed() to return true and tcp_try_undo_loss() will revert cwnd reduction. Note that we check the condition in CA_Recovery already by only calling tcp_try_undo_partial() if FLAG_SND_UNA_ADVANCED is set or tcp_try_undo_recovery() if snd_una crosses high_seq. Signed-off-by: -
Henning Rogge authored
Commit <5cf3d461> ("udp: Simplify__udp*_lib_mcast_deliver") simplified the filter for incoming IPv6 multicast but removed the check of the local socket address and the UDP destination address. This patch restores the filter to prevent sockets bound to a IPv6 multicast IP to receive other UDP traffic link unicast. Signed-off-by:
Henning Rogge <hrogge@gmail.com> Fixes: 5cf3d461 ("udp: Simplify__udp*_lib_mcast_deliver") Cc: "David S. Miller" <davem@davemloft.net> Acked-by:
-
Eric Dumazet authored
tcp_illinois and upcoming tcp_cdg require 64bit alignment of icsk_ca_priv x86 does not care, but other architectures might. Fixes: 05cbc0db ("ipv4: Create probe timer for tcp PMTU as per RFC4821") Signed-off-by:
Fan Du <fan.du@intel.com> Signed-off-by:
-
- 18 May, 2015 4 commits
-
-
John W. Linville authored
By inspection, this appears to be a typo. The gating comparison involves vxlan->dev rather than dev. In fact, dev is the iterator in the preceding loop above but it is actually constant in the 2nd loop. Use of dev seems to be a bad cut-n-paste from the prior call to unregister_netdevice_queue. Change dev to vxlan->dev, since that is what is actually being checked. Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Johan Hedberg says: ==================== pull request: bluetooth 2015-05-17 A couple more Bluetooth updates for 4.1: - New USB IDs for ath3k & btusb - Fix for remote name resolving during device discovery Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: -
Florent Fourcot authored
commit 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages send from TIME_WAIT") added the flow label in the last TCP packets. Unfortunately, it was not casted properly. This patch replace the buggy shift with be32_to_cpu/cpu_to_be32. Fixes: 1d13a96c ("ipv6: tcp: fix flowlabel value in ACK messages") Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Florent Fourcot <florent.fourcot@enst-bretagne.fr> Acked-by:
-
Nicolas Dichtel authored
Before the patch, the command 'ip link add bond2 type bond mode 802.3ad' causes the kernel to send a rtnl message for the bond2 interface, with an ifindex 0. 'ip monitor' shows: 0: bond2: <BROADCAST,MULTICAST,MASTER> mtu 1500 state DOWN group default link/ether 00:00:00:00:00:00 brd ff:ff:ff:ff:ff:ff 9: bond2@NONE: <BROADCAST,MULTICAST,MASTER> mtu 1500 qdisc noop state DOWN group default link/ether ea:3e:1f:53:92:7b brd ff:ff:ff:ff:ff:ff [snip] The patch fixes the spotted bug by checking in bond driver if the interface is registered before calling the notifier chain. It also adds a check in rtmsg_ifinfo() to prevent this kind of bug in the future. Fixes: d4261e56 ("bonding: create netlink event when bonding option is changed") CC: Jiri Pirko <jiri@resnulli.us> Reported-by:Julien Meunier <julien.meunier@6wind.com> Signed-off-by:
-
- 16 May, 2015 6 commits
-
-
Herbert Xu authored
We currently have no limit on the number of elements in a hash table. This is a problem because some users (tipc) set a ceiling on the maximum table size and when that is reached the hash table may degenerate. Others may encounter OOM when growing and if we allow insertions when that happens the hash table perofrmance may also suffer. This patch adds a new paramater insecure_max_entries which becomes the cap on the table. If unset it defaults to max_size * 2. If it is also zero it means that there is no cap on the number of elements in the table. However, the table will grow whenever the utilisation hits 100% and if that growth fails, you will get ENOMEM on insertion. As allowing oversubscription is potentially dangerous, the name contains the word insecure. Note that the cap is not a hard limit. This is done for performance reasons as enforcing a hard limit will result in use of atomic ops that are heavier than the ones we currently use. The reasoning is that we're only guarding against a gross over- subscription of the table, rather than a small breach of the limit. Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Tim Beale authored
If phy_start_aneg() was called while the phydev is in the PHY_RESUMING state, then its state would immediately transition to PHY_AN (or PHY_FORCING). This meant the phy_state_machine() never processed the PHY_RESUMING state change, which meant interrupts weren't enabled for the PHY. If the PHY used low-power mode (i.e. using BMCR_PDOWN), then the physical link wouldn't get powered up again. There seems no point for phy_start_aneg() to make the PHY_RESUMING --> PHY_AN transition, as the state machine will do this anyway. I'm not sure about the case where autoneg is disabled, as my patch will change behaviour so that the PHY goes to PHY_NOLINK instead of PHY_FORCING. An alternative solution would be to move the phy_config_interrupt() and phy_resume() work out of the state machine and into phy_start(). The background behind this: we're running linux v3.16.7 and from user-space we want to enable the eth port (i.e. do a SIOCSIFFLAGS ioctl with the IFF_UP flag) and immediately afterward set the interface's speed/duplex. Enabling the interface calls .ndo_open() then phy_start() and the PHY transitions PHY_HALTED --> PHY_RESUMING. Setting the speed/duplex ends up calling phy_ethtool_sset(), which calls phy_start_aneg() (meanwhile the phy_state_machine() hasn't processed the PHY_RESUMING state change yet). Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Herbert Xu authored
The commit c5adde94 ("netlink: eliminate nl_sk_hash_lock") breaks the autobind retry mechanism because it doesn't reset portid after a failed netlink_insert. This means that should autobind fail the first time around, then the socket will be stuck in limbo as it can never be bound again since it already has a non-zero portid. Fixes: c5adde94 ("netlink: eliminate nl_sk_hash_lock") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== The following patchset contains Netfilter fixes for your net tree, they are: 1) Fix a leak in IPVS, the sysctl table is not released accordingly when destroying a netns, patch from Tommi Rantala. 2) Fix a build error when TPROXY and socket are built-in but IPv6 defrag is compiled as module, from Florian Westphal. 3) Fix TCP tracket wrt. RFC5961 challenge ACK when in LAST_ACK state, patch from Jesper Dangaard Brouer. 4) Fix a bogus WARN_ON() in nf_tables when deleting a set element that stores a map, from Mirek Kratochvil. ==================== Signed-off-by: -
Florian Fainelli authored
RGMII interfaces come in multiple flavors: RGMII with transmit or receive internal delay, no delays at all, or delays in both direction. This change extends the initial check for PHY_INTERFACE_MODE_RGMII to cover all of these variants since EEE should be allowed for any of these modes, since it is a property of the RGMII, hence Gigabit PHY capability more than the RGMII electrical interface and its delays. Fixes: a59a4d19 ("phy: add the EEE support and the way to access to the MMD registers") Signed-off-by:
-
Ying Xue authored
Once we get a neighbour through looking up arp cache or creating a new one in rocker_port_ipv4_resolve(), the neighbour's refcount is already taken. But as we don't put the refcount again after it's used, this makes the neighbour entry leaked. Suggested-by:
Jiri Pirko <jiri@resnulli.us> Acked-by:
Ying Xue <ying.xue@windriver.com> Acked-by:
-
- 15 May, 2015 7 commits
-
-
Mirek Kratochvil authored
The values 0x00000000-0xfffffeff are reserved for userspace datatype. When, deleting set elements with maps, a bogus warning is triggered. WARNING: CPU: 0 PID: 11133 at net/netfilter/nf_tables_api.c:4481 nft_data_uninit+0x35/0x40 [nf_tables]() This fixes the check accordingly to enum definition in include/linux/netfilter/nf_tables.h Fixes: https://bugzilla.netfilter.org/show_bug.cgi?id=1013Signed-off-by:
Mirek Kratochvil <exa.exa@gmail.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
In compliance with RFC5961, the network stack send challenge ACK in response to spurious SYN packets, since commit 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets"). This pose a problem for netfilter conntrack in state LAST_ACK, because this challenge ACK is (falsely) seen as ACKing last FIN, causing a false state transition (into TIME_WAIT). The challenge ACK is hard to distinguish from real last ACK. Thus, solution introduce a flag that tracks the potential for seeing a challenge ACK, in case a SYN packet is let through and current state is LAST_ACK. When conntrack transition LAST_ACK to TIME_WAIT happens, this flag is used for determining if we are expecting a challenge ACK. Scapy based reproducer script avail here: https://github.com/netoptimizer/network-testing/blob/master/scapy/tcp_hacks_3WHS_LAST_ACK.py Fixes: 0c228e83 ("tcp: Restore RFC5961-compliant behavior for SYN packets") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Acked-by:
Jozsef Kadlecsik <kadlec@blackhole.kfki.hu> Signed-off-by:
-
Florian Westphal authored
With TPROXY=y but DEFRAG_IPV6=m we get build failure: net/built-in.o: In function `tproxy_tg_init': net/netfilter/xt_TPROXY.c:588: undefined reference to `nf_defrag_ipv6_enable' If DEFRAG_IPV6 is modular, TPROXY must be too. (or both must be builtin). This enforces =m for both. Reported-and-tested-by:
Liu Hua <liusdu@126.com> Signed-off-by:
-
Nathan Sullivan authored
Describe the handler for RXUBR better with a new comment. Signed-off-by:
Josh Cartwright <joshc@ni.com> Reviewied-by:
Ben Shelton <ben.shelton@ni.com> Acked-by:
-
Roopa Prabhu authored
RTNH_F_EXTERNAL today is printed as "offload" in iproute2 output. This patch renames the flag to be consistent with what the user sees. Signed-off-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Bjorn Helgaas authored
With a cross-compiler based on gcc-4.9, I see warnings like the following: drivers/net/ethernet/mellanox/mlx4/resource_tracker.c: In function 'mlx4_SW2HW_CQ_wrapper': drivers/net/ethernet/mellanox/mlx4/resource_tracker.c:3048:10: error: 'cq' may be used uninitialized in this function [-Werror=maybe-uninitialized] cq->mtt = mtt; I think the warning is spurious because we only use cq when cq_res_start_move_to() returns zero, and it always initializes *cq in that case. The srq case is similar. But maybe gcc isn't smart enough to figure that out. Initialize cq and srq explicitly to avoid the warnings. Signed-off-by:Bjorn Helgaas <bhelgaas@google.com> Signed-off-by:
-
Vlad Yasevich authored
It was reported that trancerout6 would cause a kernel to crash when trying to compute checksums on raw UDP packets. The cause was the check in __ip6_append_data that would attempt to use partial checksums on the packet. However, raw sockets do not initialize partial checksum fields so partial checksums can't be used. Solve this the same way IPv4 does it. raw sockets pass transhdrlen value of 0 to ip_append_data which causes the checksum to be computed in software. Use the same check in ip6_append_data (check transhdrlen). Reported-by:
Wolfgang Walter <linux@stwm.de> CC: Wolfgang Walter <linux@stwm.de> CC: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
-
