- 03 May, 2017 39 commits
-
-
David Ahern authored
[ Upstream commit 8048ced9 ] Taking down the loopback device wreaks havoc on IPv6 routing. By extension, taking down a VRF device wreaks havoc on its table. Dmitry and Andrey both reported heap out-of-bounds reports in the IPv6 FIB code while running syzkaller fuzzer. The root cause is a dead dst that is on the garbage list gets reinserted into the IPv6 FIB. While on the gc (or perhaps when it gets added to the gc list) the dst->next is set to an IPv4 dst. A subsequent walk of the ipv6 tables causes the out-of-bounds access. Andrey's reproducer was the key to getting to the bottom of this. With IPv6, host routes for an address have the dst->dev set to the loopback device. When the 'lo' device is taken down, rt6_ifdown initiates a walk of the fib evicting routes with the 'lo' device which means all host routes are removed. That process moves the dst which is attached to an inet6_ifaddr to the gc list and marks it as dead. The recent change to keep global IPv6 addresses added a new function, fixup_permanent_addr, that is called on admin up. That function restarts dad for an inet6_ifaddr and when it completes the host route attached to it is inserted into the fib. Since the route was marked dead and moved to the gc list, re-inserting the route causes the reported out-of-bounds accesses. If the device with the address is taken down or the address is removed, the WARN_ON in fib6_del is triggered. All of those faults are fixed by regenerating the host route if the existing one has been moved to the gc list, something that can be determined by checking if the rt6i_ref counter is 0. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Reported-by:
Dmitry Vyukov <dvyukov@google.com> Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
David Ahern <dsa@cumulusnetworks.com> Acked-by:
Martin KaFai Lau <kafai@fb.com> Acked-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Herbert Xu authored
[ Upstream commit f6478218 ] When a parent macvlan device is destroyed we end up purging its broadcast queue without dropping the device reference count on the packet source device. This causes the source device to linger. This patch drops that reference count. Fixes: 260916df ("macvlan: Fix potential use-after free for...") Reported-by:
Joe Ghalam <Joe.Ghalam@dell.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 4ef1b286 ] SOF_TIMESTAMPING_OPT_STATS can be enabled and disabled while packets are collected on the error queue. So, checking SOF_TIMESTAMPING_OPT_STATS in sk->sk_tsflags is not enough to safely assume that the skb contains OPT_STATS data. Add a bit in sock_exterr_skb to indicate whether the skb contains opt_stats data. Fixes: 1c885808 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by:
JongHwan Kim <zzoru007@gmail.com> Signed-off-by:
Soheil Hassas Yeganeh <soheil@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
-
Soheil Hassas Yeganeh authored
[ Upstream commit 8605330a ] __sock_recv_timestamp can be called for both normal skbs (for receive timestamps) and for skbs on the error queue (for transmit timestamps). Commit 1c885808 (tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING) assumes any skb passed to __sock_recv_timestamp are from the error queue, containing OPT_STATS in the content of the skb. This results in accessing invalid memory or generating junk data. To fix this, set skb->pkt_type to PACKET_OUTGOING for packets on the error queue. This is safe because on the receive path on local sockets skb->pkt_type is never set to PACKET_OUTGOING. With that, copy OPT_STATS from a packet, only if its pkt_type is PACKET_OUTGOING. Fixes: 1c885808 ("tcp: SOF_TIMESTAMPING_OPT_STATS option for SO_TIMESTAMPING") Reported-by:
-
Ilan Tayari authored
[ Upstream commit 5e82c9e4 ] Handler for ETHTOOL_GRXCLSRLALL must set info->data to the size of the table, regardless of the amount of entries in it. Existing code does not do that, and this breaks all usage of ethtool -N or -n without explicit location, with this error: rmgr: Invalid RX class rules table size: Success Set info->data to the table size. Tested: ethtool -n ens8 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 ethtool -N ens8 flow-type ip4 src-ip 1.1.1.1 dst-ip 2.2.2.2 action 1 loc 55 ethtool -n ens8 ethtool -N ens8 delete 1023 ethtool -N ens8 delete 55 Fixes: f913a72a ("net/mlx5e: Add support to get ethtool flow rules") Signed-off-by:
Ilan Tayari <ilant@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Eugenia Emantayev authored
[ Upstream commit cbad8cdd ] RX packet headers are meant to be contained in SKB linear part, and chose a threshold of 128. It turns out this is not enough, i.e. for IPv6 packet over VxLAN. In this case, UDP/IPv4 needs 42 bytes, GENEVE header is 8 bytes, and 86 bytes for TCP/IPv6. In total 136 bytes that is more than current 128 bytes. In this case expand header flow is reached. The warning in skb_try_coalesce() caused by a wrong truesize was already fixed here: commit 158f323b ("net: adjust skb->truesize in pskb_expand_head()"). Still, we prefer to totally avoid the expand header flow for performance reasons. Tested regular TCP_STREAM with iperf for 1 and 8 streams, no degradation was found. Fixes: 461017cb ("net/mlx5e: Support RX multi-packet WQE (Striding RQ)") Signed-off-by:
Eugenia Emantayev <eugenia@mellanox.com> Signed-off-by:
-
Or Gerlitz authored
[ Upstream commit c415f704 ] On ConnectX5 the wqe inline mode is "none" and hence the FW reports MLX5_CAP_INLINE_MODE_NOT_REQUIRED. Fix our devlink callbacks to deal with that on get and set. Also fix the tc flow parsing code not to fail anything when inline isn't required. Fixes: bffaa916 ('net/mlx5: E-Switch, Add control for inline mode') Signed-off-by:
Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
-
Mohamad Haj Yahia authored
[ Upstream commit 55378a23 ] If FW is stuck in initializing state we will skip the driver load, but current error handling flow doesn't clean previously allocated command interface resources. Fixes: e3297246 ('net/mlx5_core: Wait for FW readiness on startup') Signed-off-by:
Mohamad Haj Yahia <mohamad@mellanox.com> Signed-off-by:
-
Nikolay Aleksandrov authored
[ Upstream commit 723b929c ] Andrey Konovalov reported a BUG caused by the ip6mr code which is caused because we call unregister_netdevice_many for a device that is already being destroyed. In IPv4's ipmr that has been resolved by two commits long time ago by introducing the "notify" parameter to the delete function and avoiding the unregister when called from a notifier, so let's do the same for ip6mr. The trace from Andrey: ------------[ cut here ]------------ kernel BUG at net/core/dev.c:6813! invalid opcode: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 1165 Comm: kworker/u4:3 Not tainted 4.11.0-rc7+ #251 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 Workqueue: netns cleanup_net task: ffff880069208000 task.stack: ffff8800692d8000 RIP: 0010:rollback_registered_many+0x348/0xeb0 net/core/dev.c:6813 RSP: 0018:ffff8800692de7f0 EFLAGS: 00010297 RAX: ffff880069208000 RBX: 0000000000000002 RCX: 0000000000000001 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff88006af90569 RBP: ffff8800692de9f0 R08: ffff8800692dec60 R09: 0000000000000000 R10: 0000000000000006 R11: 0000000000000000 R12: ffff88006af90070 R13: ffff8800692debf0 R14: dffffc0000000000 R15: ffff88006af90000 FS: 0000000000000000(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fe7e897d870 CR3: 00000000657e7000 CR4: 00000000000006e0 Call Trace: unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many+0xc8/0x120 net/core/dev.c:7880 ip6mr_device_event+0x362/0x3f0 net/ipv6/ip6mr.c:1346 notifier_call_chain+0x145/0x2f0 kernel/notifier.c:93 __raw_notifier_call_chain kernel/notifier.c:394 raw_notifier_call_chain+0x2d/0x40 kernel/notifier.c:401 call_netdevice_notifiers_info+0x51/0x90 net/core/dev.c:1647 call_netdevice_notifiers net/core/dev.c:1663 rollback_registered_many+0x919/0xeb0 net/core/dev.c:6841 unregister_netdevice_many.part.105+0x87/0x440 net/core/dev.c:7881 unregister_netdevice_many net/core/dev.c:7880 default_device_exit_batch+0x4fa/0x640 net/core/dev.c:8333 ops_exit_list.isra.4+0x100/0x150 net/core/net_namespace.c:144 cleanup_net+0x5a8/0xb40 net/core/net_namespace.c:463 process_one_work+0xc04/0x1c10 kernel/workqueue.c:2097 worker_thread+0x223/0x19c0 kernel/workqueue.c:2231 kthread+0x35e/0x430 kernel/kthread.c:231 ret_from_fork+0x31/0x40 arch/x86/entry/entry_64.S:430 Code: 3c 32 00 0f 85 70 0b 00 00 48 b8 00 02 00 00 00 00 ad de 49 89 47 78 e9 93 fe ff ff 49 8d 57 70 49 8d 5f 78 eb 9e e8 88 7a 14 fe <0f> 0b 48 8b 9d 28 fe ff ff e8 7a 7a 14 fe 48 b8 00 00 00 00 00 RIP: rollback_registered_many+0x348/0xeb0 RSP: ffff8800692de7f0 ---[ end trace e0b29c57e9b3292c ]--- Reported-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Tested-by:
-
Tushar Dave authored
[ Upstream commit c70b17b7 ] Reducing real_num_tx_queues needs to be in sync with skb queue_mapping otherwise skbs with queue_mapping greater than real_num_tx_queues can be sent to the underlying driver and can result in kernel panic. One such event is running netconsole and enabling VF on the same device. Or running netconsole and changing number of tx queues via ethtool on same device. e.g. Unable to handle kernel NULL pointer dereference tsk->{mm,active_mm}->context = 0000000000001525 tsk->{mm,active_mm}->pgd = fff800130ff9a000 \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ kworker/48:1(475): Oops [#1] CPU: 48 PID: 475 Comm: kworker/48:1 Tainted: G OE 4.11.0-rc3-davem-net+ #7 Workqueue: events queue_process task: fff80013113299c0 task.stack: fff800131132c000 TSTATE: 0000004480e01600 TPC: 00000000103f9e3c TNPC: 00000000103f9e40 Y: 00000000 Tainted: G OE TPC: <ixgbe_xmit_frame_ring+0x7c/0x6c0 [ixgbe]> g0: 0000000000000000 g1: 0000000000003fff g2: 0000000000000000 g3: 0000000000000001 g4: fff80013113299c0 g5: fff8001fa6808000 g6: fff800131132c000 g7: 00000000000000c0 o0: fff8001fa760c460 o1: fff8001311329a50 o2: fff8001fa7607504 o3: 0000000000000003 o4: fff8001f96e63a40 o5: fff8001311d77ec0 sp: fff800131132f0e1 ret_pc: 000000000049ed94 RPC: <set_next_entity+0x34/0xb80> l0: 0000000000000000 l1: 0000000000000800 l2: 0000000000000000 l3: 0000000000000000 l4: 000b2aa30e34b10d l5: 0000000000000000 l6: 0000000000000000 l7: fff8001fa7605028 i0: fff80013111a8a00 i1: fff80013155a0780 i2: 0000000000000000 i3: 0000000000000000 i4: 0000000000000000 i5: 0000000000100000 i6: fff800131132f1a1 i7: 00000000103fa4b0 I7: <ixgbe_xmit_frame+0x30/0xa0 [ixgbe]> Call Trace: [00000000103fa4b0] ixgbe_xmit_frame+0x30/0xa0 [ixgbe] [0000000000998c74] netpoll_start_xmit+0xf4/0x200 [0000000000998e10] queue_process+0x90/0x160 [0000000000485fa8] process_one_work+0x188/0x480 [0000000000486410] worker_thread+0x170/0x4c0 [000000000048c6b8] kthread+0xd8/0x120 [0000000000406064] ret_from_fork+0x1c/0x2c [0000000000000000] (null) Disabling lock debugging due to kernel taint Caller[00000000103fa4b0]: ixgbe_xmit_frame+0x30/0xa0 [ixgbe] Caller[0000000000998c74]: netpoll_start_xmit+0xf4/0x200 Caller[0000000000998e10]: queue_process+0x90/0x160 Caller[0000000000485fa8]: process_one_work+0x188/0x480 Caller[0000000000486410]: worker_thread+0x170/0x4c0 Caller[000000000048c6b8]: kthread+0xd8/0x120 Caller[0000000000406064]: ret_from_fork+0x1c/0x2c Caller[0000000000000000]: (null) Signed-off-by:
Tushar Dave <tushar.n.dave@oracle.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 557c44be ] Andrey reported a fault in the IPv6 route code: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 1 PID: 4035 Comm: a.out Not tainted 4.11.0-rc7+ #250 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 task: ffff880069809600 task.stack: ffff880062dc8000 RIP: 0010:ip6_rt_cache_alloc+0xa6/0x560 net/ipv6/route.c:975 RSP: 0018:ffff880062dced30 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: ffff8800670561c0 RCX: 0000000000000006 RDX: 0000000000000003 RSI: ffff880062dcfb28 RDI: 0000000000000018 RBP: ffff880062dced68 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff880062dcfb28 R14: dffffc0000000000 R15: 0000000000000000 FS: 00007feebe37e7c0(0000) GS:ffff88006cb00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205a0fe4 CR3: 000000006b5c9000 CR4: 00000000000006e0 Call Trace: ip6_pol_route+0x1512/0x1f20 net/ipv6/route.c:1128 ip6_pol_route_output+0x4c/0x60 net/ipv6/route.c:1212 ... Andrey's syzkaller program passes rtmsg.rtmsg_flags with the RTF_PCPU bit set. Flags passed to the kernel are blindly copied to the allocated rt6_info by ip6_route_info_create making a newly inserted route appear as though it is a per-cpu route. ip6_rt_cache_alloc sees the flag set and expects rt->dst.from to be set - which it is not since it is not really a per-cpu copy. The subsequent call to __ip6_dst_alloc then generates the fault. Fix by checking for the flag and failing with EINVAL. Fixes: d52d3997 ("ipv6: Create percpu rt6_info") Reported-by:
-
Ilan Tayari authored
[ Upstream commit 43170c4e ] Commit 07b26c94 ("gso: Support partial splitting at the frag_list pointer") assumes that all SKBs in a frag_list (except maybe the last one) contain the same amount of GSO payload. This assumption is not always correct, resulting in the following warning message in the log: skb_segment: too many frags For example, mlx5 driver in Striding RQ mode creates some RX SKBs with one frag, and some with 2 frags. After GRO, the frag_list SKBs end up having different amounts of payload. If this frag_list SKB is then forwarded, the aforementioned assumption is violated. Validate the assumption, and fall back to software GSO if it not true. Change-Id: Ia03983f4a47b6534dd987d7a2aad96d54d46d212 Fixes: 07b26c94 ("gso: Support partial splitting at the frag_list pointer") Signed-off-by:
Ilya Lesokhin <ilyal@mellanox.com> Signed-off-by:
-
Sabrina Dubroca authored
[ Upstream commit ec9c4215 ] Commit a149e7c7 ("ipv6: sr: add support for SRH injection through setsockopt") introduced handling of IPV6_SRCRT_TYPE_4, but at the same time restricted it to only IPV6_SRCRT_TYPE_0 and IPV6_SRCRT_TYPE_4. Previously, ipv6_push_exthdr() and fl6_update_dst() would also handle other values (ie STRICT and TYPE_2). Restore previous source routing behavior, by handling IPV6_SRCRT_STRICT and IPV6_SRCRT_TYPE_2 the same way as IPV6_SRCRT_TYPE_0 in ipv6_push_exthdr() and fl6_update_dst(). Fixes: a149e7c7 ("ipv6: sr: add support for SRH injection through setsockopt") Signed-off-by:
Sabrina Dubroca <sd@queasysnail.net> Reviewed-by:
Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by:
-
David Lebrun authored
[ Upstream commit 95b9b88d ] The icmpv6_param_prob() function already does a kfree_skb(), this patch removes the duplicate one. Fixes: 1ababeba ("ipv6: implement dataplane support for rthdr type 4 (Segment Routing Header)") Reported-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
David Lebrun <david.lebrun@uclouvain.be> Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 9d386cd9 ] This patch is prompted by a static checker warning about a potential use after free. The concern is that netif_rx_ni() can free "skb" and we call it twice. When I look at the commit that added this, it looks like some stray lines were added accidentally. It doesn't make sense to me that we would recieve the same data two times. I asked the author but never recieved a response. I can't test this code, but I'm pretty sure my patch is correct. Fixes: 4b063258 ("dp83640: Delay scheduled work.") Signed-off-by:
Stefan Sørensen <stefan.sorensen@spectralink.com> Signed-off-by:
-
David Lebrun authored
[ Upstream commit 2f3bb642 ] This patch fixes an out-of-bounds access in seg6_validate_srh() when the trailing data is less than sizeof(struct sr6_tlv). Reported-by:
-
Sergei Shtylyov authored
[ Upstream commit 1debdc8f ] The DMA API debugging (when enabled) causes: WARNING: CPU: 0 PID: 1445 at lib/dma-debug.c:519 add_dma_entry+0xe0/0x12c DMA-API: exceeded 7 overlapping mappings of cacheline 0x01b2974d to be printed after repeated initialization of the Ether device, e.g. suspend/resume or 'ifconfig' up/down. This is because DMA buffers mapped using dma_map_single() in sh_eth_ring_format() and sh_eth_start_xmit() are never unmapped. Resolve this problem by unmapping the buffers when freeing the descriptor rings; in order to do it right, we'd have to add an extra parameter to sh_eth_txfree() (we rename this function to sh_eth_tx_free(), while at it). Based on the commit a47b70ea ("ravb: unmap descriptors when freeing rings"). Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit 426c87ca ] Only need 1 l3mdev FIB rule. Fix setting NLM_F_EXCL in the nlmsghdr. Fixes: 1aa6c4f6 ("net: vrf: Add l3mdev rules on first device create") Signed-off-by:
-
Willem de Bruijn authored
[ Upstream commit 1862d620 ] Syzkaller reported a use-after-free in ip_recv_error at line info->ipi_ifindex = skb->dev->ifindex; This function is called on dequeue from the error queue, at which point the device pointer may no longer be valid. Save ifindex on enqueue in __skb_complete_tx_timestamp, when the pointer is valid or NULL. Store it in temporary storage skb->cb. It is safe to reference skb->dev here, as called from device drivers or dev_queue_xmit. The exception is when called from tcp_ack_tstamp; in that case it is NULL and ifindex is set to 0 (invalid). Do not return a pktinfo cmsg if ifindex is 0. This maintains the current behavior of not returning a cmsg if skb->dev was NULL. On dequeue, the ipv4 path will cast from sock_exterr_skb to in_pktinfo. Both have ifindex as their first element, so no explicit conversion is needed. This is by design, introduced in commit 0b922b7a ("net: original ingress device index in PKTINFO"). For ipv6 ip6_datagram_support_cmsg converts to in6_pktinfo. Fixes: 829ae9d6 ("net-timestamp: allow reading recv cmsg on errqueue with origin tstamp") Reported-by:
-
Rabin Vincent authored
[ Upstream commit a2d6cbb0 ] addrconf_ifdown() removes elements from the idev->addr_list without holding the idev->lock. If this happens while the loop in __ipv6_dev_get_saddr() is handling the same element, that function ends up in an infinite loop: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [test:1719] Call Trace: ipv6_get_saddr_eval+0x13c/0x3a0 __ipv6_dev_get_saddr+0xe4/0x1f0 ipv6_dev_get_saddr+0x1b4/0x204 ip6_dst_lookup_tail+0xcc/0x27c ip6_dst_lookup_flow+0x38/0x80 udpv6_sendmsg+0x708/0xba8 sock_sendmsg+0x18/0x30 SyS_sendto+0xb8/0xf8 syscall_common+0x34/0x58 Fixes: 6a923934 (Revert "ipv6: Revert optional address flusing on ifdown.") Signed-off-by:
Rabin Vincent <rabinv@axis.com> Acked-by:
-
Eric Dumazet authored
[ Upstream commit 17c3060b ] In the (very unlikely) case a passive socket becomes a listener, we do not want to duplicate its saved SYN headers. This would lead to double frees, use after free, and please hackers and various fuzzers Tested: 0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3 +0 setsockopt(3, IPPROTO_TCP, TCP_SAVE_SYN, [1], 4) = 0 +0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0 +0 bind(3, ..., ...) = 0 +0 listen(3, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 +0 accept(3, ..., ...) = 4 +0 connect(4, AF_UNSPEC, ...) = 0 +0 close(3) = 0 +0 bind(4, ..., ...) = 0 +0 listen(4, 5) = 0 +0 < S 0:0(0) win 32972 <mss 1460,nop,wscale 7> +0 > S. 0:0(0) ack 1 <...> +.1 < . 1:1(0) ack 1 win 257 Fixes: cd8ae852 ("tcp: provide SYN headers for passive connections") Signed-off-by:
-
Xin Long authored
[ Upstream commit 34b2789f ] Now sctp doesn't check sock's state before listening on it. It could even cause changing a sock with any state to become a listening sock when doing sctp_listen. This patch is to fix it by checking sock's state in sctp_listen, so that it will listen on the sock with right state. Reported-by:
Xin Long <lucien.xin@gmail.com> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Florian Larysch authored
[ Upstream commit a8801799 ] inet_rtm_getroute synthesizes a skeletal ICMP skb, which is passed to ip_route_input when iif is given. If a multipath route is present for the designated destination, ip_multipath_icmp_hash ends up being called, which uses the source/destination addresses within the skb to calculate a hash. However, those are not set in the synthetic skb, causing it to return an arbitrary and incorrect result. Instead, use UDP, which gets no such special treatment. Signed-off-by:
Florian Larysch <fl@n621.de> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 249ee819 ] PPP pseudo-wire type is 7 (11 is L2TP_PWTYPE_IP). Fixes: f1f39f91 ("l2tp: auto load type modules") Signed-off-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e08293a4 ] Take a reference on the sessions returned by l2tp_session_find_nth() (and rename it l2tp_session_get_nth() to reflect this change), so that caller is assured that the session isn't going to disappear while processing it. For procfs and debugfs handlers, the session is held in the .start() callback and dropped in .show(). Given that pppol2tp_seq_session_show() dereferences the associated PPPoL2TP socket and that l2tp_dfs_seq_session_show() might call pppol2tp_show(), we also need to call the session's .ref() callback to prevent the socket from going away from under us. Fixes: fd558d18 ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Fixes: 0ad66140 ("l2tp: Add debugfs files for dumping l2tp debug info") Fixes: 309795f4 ("l2tp: Add netlink control API for L2TP") Signed-off-by:
-
Yi-Hung Wei authored
[ Upstream commit 6f56f618 ] ovs_flow_key_update() is called when the flow key is invalid, and it is used to update and revalidate the flow key. Commit 329f45bc ("openvswitch: add mac_proto field to the flow key") introduces mac_proto field to flow key and use it to determine whether the flow key is valid. However, the commit does not update the code path in ovs_flow_key_update() to revalidate the flow key which may cause BUG_ON() on execute_recirc(). This patch addresses the aforementioned issue. Fixes: 329f45bc ("openvswitch: add mac_proto field to the flow key") Signed-off-by:
Yi-Hung Wei <yihung.wei@gmail.com> Acked-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit bcc5364b ] When calculating po->tp_hdrlen + po->tp_reserve the result can overflow. Fix by checking that tp_reserve <= INT_MAX on assign. Signed-off-by:
-
Andrey Konovalov authored
[ Upstream commit 8f8d28e4 ] When calculating rb->frames_per_block * req->tp_block_nr the result can overflow. Add a check that tp_block_size * tp_block_nr <= UINT_MAX. Since frames_per_block <= tp_block_size, the expression would never overflow. Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit e91793bb ] The Rx path may grab the socket right before pppol2tp_release(), but nothing guarantees that it will enqueue packets before skb_queue_purge(). Therefore, the socket can be destroyed without its queues fully purged. Fix this by purging queues in pppol2tp_session_destruct() where we're guaranteed nothing is still referencing the socket. Fixes: 9e9cb622 ("l2tp: fix userspace reception on plain L2TP sockets") Signed-off-by:
-
Guillaume Nault authored
[ Upstream commit 94d7ee0b ] The code following l2tp_tunnel_find() expects that a new reference is held on sk. Either sk_receive_skb() or the discard_put error path will drop a reference from the tunnel's socket. This issue exists in both l2tp_ip and l2tp_ip6. Fixes: a3c18422 ("l2tp: hold socket before dropping lock in l2tp_ip{, 6}_recv()") Signed-off-by:
-
Talat Batheesh authored
[ Upstream commit e497ec68 ] In NETDEV_CHANGEUPPER event the upper_info field is valid only when linking is true. Otherwise it should be ignored. Fixes: 7907f23a (net/mlx5: Implement RoCE LAG feature) Signed-off-by:
Talat Batheesh <talatb@mellanox.com> Reviewed-by:
Aviv Heller <avivh@mellanox.com> Reviewed-by:
Moni Shoua <monis@mellanox.com> Signed-off-by:
-
Alexei Starovoitov authored
[ Upstream commit b1977682 ] llvm can optimize the 'if (ptr > data_end)' checks to be in the order slightly different than the original C code which will confuse verifier. Like: if (ptr + 16 > data_end) return TC_ACT_SHOT; // may be followed by if (ptr + 14 > data_end) return TC_ACT_SHOT; while llvm can see that 'ptr' is valid for all 16 bytes, the verifier could not. Fix verifier logic to account for such case and add a test. Reported-by:
Huapeng Zhou <hzhou@fb.com> Fixes: 969bf05e ("bpf: direct packet access") Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
-
Florian Westphal authored
[ Upstream commit 28ee1b74 ] Unfortunately too many devices (not under our control) use tcp_tw_recycle=1, which depends on timestamps being identical of the same saddr. Although tcp_tw_recycle got removed in net-next we can't make such end hosts disappear so downgrade to per-host timestamp offsets. 4.10 note: original patch uses siphash (added in 4.11), since ts_off is only used to obscure uptime (and doesn't use same secret as isn generator) this uses jhash instead. Cc: Soheil Hassas Yeganeh <soheil@google.com> Cc: Eric Dumazet <edumazet@google.com> Cc: Neal Cardwell <ncardwell@google.com> Cc: Yuchung Cheng <ycheng@google.com> Reported-by:
Yvan Vanrossomme <yvan@vanrossomme.net> Fixes: 95a22cae ("tcp: randomize tcp timestamp offsets for each connection") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
WANG Cong authored
[ Upstream commit a80db69e ] There is no reason to continue after a copy_from_user() failure. Fixes: ab7ac4eb ("kcm: Kernel Connection Multiplexor module") Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
Nathan Sullivan authored
[ Upstream commit 49d52e81 ] If the PHY is halted on stop, then do not set the state to PHY_UP. This ensures the phy will be restarted later in phy_start when the machine is started again. Fixes: 00db8189 ("This patch adds a PHY Abstraction Layer to the Linux Kernel, enabling ethernet drivers to remain as ignorant as is reasonable of the connected PHY's design and operation details.") Signed-off-by:
Nathan Sullivan <nathan.sullivan@ni.com> Signed-off-by:
Brad Mouring <brad.mouring@ni.com> Acked-by:
Xander Huff <xander.huff@ni.com> Acked-by:
Kyle Roeschley <kyle.roeschley@ni.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 48481c8f ] Dmitry posted a nice reproducer of a bug triggering in neigh_probe() when dereferencing a NULL neigh->ops->solicit method. This can happen for arp_direct_ops/ndisc_direct_ops and similar, which can be used for NUD_NOARP neighbours (created when dev->header_ops is NULL). Admin can then force changing nud_state to some other state that would fire neigh timer. Signed-off-by:
-
Tom Hromatka authored
[ Upstream commit 9ae34dbd ] This commit moves sparc64's prototype of pmd_write() outside of the CONFIG_TRANSPARENT_HUGEPAGE ifdef. In 2013, commit a7b9403f ("sparc64: Encode huge PMDs using PTE encoding.") exposed a path where pmd_write() could be called without CONFIG_TRANSPARENT_HUGEPAGE defined. This can result in the panic below. The diff is awkward to read, but the changes are straightforward. pmd_write() was moved outside of #ifdef CONFIG_TRANSPARENT_HUGEPAGE. Also, __HAVE_ARCH_PMD_WRITE was defined. kernel BUG at include/asm-generic/pgtable.h:576! \|/ ____ \|/ "@'/ .. \`@" /_| \__/ |_\ \__U_/ oracle_8114_cdb(8114): Kernel bad sw trap 5 [#1] CPU: 120 PID: 8114 Comm: oracle_8114_cdb Not tainted 4.1.12-61.7.1.el6uek.rc1.sparc64 #1 task: fff8400700a24d60 ti: fff8400700bc4000 task.ti: fff8400700bc4000 TSTATE: 0000004411e01607 TPC: 00000000004609f8 TNPC: 00000000004609fc Y: 00000005 Not tainted TPC: <gup_huge_pmd+0x198/0x1e0> g0: 000000000001c000 g1: 0000000000ef3954 g2: 0000000000000000 g3: 0000000000000001 g4: fff8400700a24d60 g5: fff8001fa5c10000 g6: fff8400700bc4000 g7: 0000000000000720 o0: 0000000000bc5058 o1: 0000000000000240 o2: 0000000000006000 o3: 0000000000001c00 o4: 0000000000000000 o5: 0000048000080000 sp: fff8400700bc6ab1 ret_pc: 00000000004609f0 RPC: <gup_huge_pmd+0x190/0x1e0> l0: fff8400700bc74fc l1: 0000000000020000 l2: 0000000000002000 l3: 0000000000000000 l4: fff8001f93250950 l5: 000000000113f800 l6: 0000000000000004 l7: 0000000000000000 i0: fff8400700ca46a0 i1: bd0000085e800453 i2: 000000026a0c4000 i3: 000000026a0c6000 i4: 0000000000000001 i5: fff800070c958de8 i6: fff8400700bc6b61 i7: 0000000000460dd0 I7: <gup_pud_range+0x170/0x1a0> Call Trace: [0000000000460dd0] gup_pud_range+0x170/0x1a0 [0000000000460e84] get_user_pages_fast+0x84/0x120 [00000000006f5a18] iov_iter_get_pages+0x98/0x240 [00000000005fa744] do_direct_IO+0xf64/0x1e00 [00000000005fbbc0] __blockdev_direct_IO+0x360/0x15a0 [00000000101f74fc] ext4_ind_direct_IO+0xdc/0x400 [ext4] [00000000101af690] ext4_ext_direct_IO+0x1d0/0x2c0 [ext4] [00000000101af86c] ext4_direct_IO+0xec/0x220 [ext4] [0000000000553bd4] generic_file_read_iter+0x114/0x140 [00000000005bdc2c] __vfs_read+0xac/0x100 [00000000005bf254] vfs_read+0x54/0x100 [00000000005bf368] SyS_pread64+0x68/0x80 Signed-off-by:
Tom Hromatka <tom.hromatka@oracle.com> Signed-off-by:
-
bob picco authored
[ Upstream commit adfae8a5 ] I encountered this bug when using /proc/kcore to examine the kernel. Plus a coworker inquired about debugging tools. We computed pa but did not use it during the maximum physical address bits test. Instead we used the identity mapped virtual address which will always fail this test. I believe the defect came in here: [bpicco@zareason linus.git]$ git describe --contains bb4e6e85 v3.18-rc1~87^2~4 . Signed-off-by:
Bob Picco <bob.picco@oracle.com> Signed-off-by:
-
Eric Dumazet authored
commit 43a66845 upstream. We got a report of yet another bug in ping http://www.openwall.com/lists/oss-security/2017/03/24/6 ->disconnect() is not called with socket lock held. Fix this by acquiring ping rwlock earlier. Thanks to Daniel, Alexander and Andrey for letting us know this problem. Fixes: c319b4d7 ("net: ipv4: add IPPROTO_ICMP socket kind") Signed-off-by:
Daniel Jiang <danieljiang0415@gmail.com> Reported-by:
Solar Designer <solar@openwall.com> Reported-by:
-
- 27 Apr, 2017 1 commit
-
-
Greg Kroah-Hartman authored
-
