[why]
Incorrectly using MicroTileWidth instead of MacroTileWidth for
calculations.

[how]
Remove all unused references to MicroTile and change them to MacroTile.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Aric Cyr <aric.cyr@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Why & How]
DIG_FIFO_READ_START_LEVEL should only be set to default value (7) by software.
Removed all instances of resetting the register to 0
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Leo Chen <sancchen@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

[Description]
Update MBLK calculation according to hardware doc.  For DCC case we were
not allocation enough MALL due to an inaccurate MBLK calculation.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Alvin Lee <Alvin.Lee2@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

This reverts commit a4f1b042 since
returning false in case of SubVP results in no cursor being visible on
desktop as there is no sw cursor fallback path on all platforms.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Reviewed-by: Alvin Lee <Alvin.Lee2@amd.com>
Acked-by: Pavle Kotarac <Pavle.Kotarac@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

No need to reset error status since only umc ras supported on psp v13_0_0.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Was missing before and would have resulted in a write to
a non-existant register. Normally APUs don't use HDP, but
other asics could use this code and APUs do use the HDP
when used in passthrough.
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

align TMR BO size TO tmr size is not necessary,
modify the size to 1M to avoid re-create BO fail
when serious VRAM fragmentation.

v2:
add new macro PSP_TMR_ALIGNMENT for TMR BO alignment size
Signed-off-by: Yang Wang <KevinYang.Wang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Enable full reset for RAS supported configuration on gc v11_0_0.

v2: simplify the code.
Signed-off-by: Candice Li <candice.li@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Currently, we aren't handling DRM_IOCTL_MODE_DIRTYFB. So, use
drm_atomic_helper_dirtyfb() as the dirty callback in the amdgpu_fb_funcs
struct.
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

As per PCIE Base Spec r4.0 Section 6.18
'Software must not enable LTR in an Endpoint unless the Root Complex
and all intermediate Switches indicate support for LTR.'

This fixes the Unsupported Request error reported through AER during
ASPM enablement.

Link: https://bugzilla.kernel.org/show_bug.cgi?id=216455

The error was unnoticed before and got visible because of the commit
referenced below. This doesn't fix anything in the commit below, rather
fixes the issue in amdgpu exposed by the commit. The reference is only
to associate this commit with below one so that both go together.

Fixes: 8795e182 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
Reported-by: Gustaw Smolarczyk <wielkiegie@gmail.com>
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>

Cc: stable@vger.kernel.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

To avoid hardware intermittent failures.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-fixes-2022-09-08' of git://anongit.freedesktop.org/drm/drm-intel into drm-fixes

- Fix MIPI sequence block copy from BIOS' table. (Ville)
- Fix PCODE min freq setup when GuC's SLPC is in use. (Rodrigo)
- Implement Workaround for eDP. (Ville)
- Fix has_flat_ccs selection for DG1. (Matt)
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/Yxn1WpmUJnJpqq23@intel.com

Short summary of fixes pull:

 * edid: Fix EDID 1.4 range-descriptor parsing
 * panfrost: Fix devfreq OPP
 * ttm: Fix ghost-object bulk moves
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/YxniKN4rK4qPp+J9@linux-uq9g

Enabling panfrost GPU OPP with dynamic regulator will make OPP
responsible to enable and configure it.

Unfortunately OPP configure and enable the regulator when an OPP
is asked to be set, which is not the case during
panfrost_devfreq_init().

This leave the regulator unconfigured and if no GPU load is
triggered, no OPP is asked to be set which make the regulator framework
switching it off during regulator_late_cleanup() without
noticing and therefore make the board hang as any access to GPU
memory space make bus locks up.

Call dev_pm_opp_set_opp() with the recommend OPP in
panfrost_devfreq_init() to enable the regulator, this will properly
configure and enable the regulator and will avoid any switch off
by regulator_late_cleanup().
Suggested-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906153034.153321-5-peron.clem@gmail.com

Otherwise lockdep will complain about cleaning up the bulk_move.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220907100051.570641-1-christian.koenig@amd.com
Fixes: d91c411c ("drm/ttm: update bulk move object of ghost BO")

Merge tag 'amd-drm-fixes-6.0-2022-09-07' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-6.0-2022-09-07:

amdgpu:
- Firmware header fix
- SMU 13.x fix
- Debugfs memory leak fix
- NBIO 7.7 fix
- Firmware memory leak fix

amdkfd:
- Debug output fix
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220908032332.5880-1-alexander.deucher@amd.com

It's missed in psp fini.
Signed-off-by: Guchun Chen <guchun.chen@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

current function mixes CSDMA_DOORBELL_RANGE and SDMA0_DOORBELL_RANGE
range/size manipulation, while these 2 registers have difference size
field mask. Remove range/size manipulation for SDMA0_DOORBELL_RANGE.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Xiaojian Du <Xiaojian.Du@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Addresses should be printed in hex format.
Signed-off-by: Yifan Zhang <yifan1.zhang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time.  Fix this up by properly
calling dput().

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Wayne Lin <Wayne.Lin@amd.com>
Cc: hersen wu <hersenxs.wu@amd.com>
Cc: Wenjing Liu <wenjing.liu@amd.com>
Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com>
Cc: Thelford Williams <tdwilliamsiv@gmail.com>
Cc: Fangzhi Zuo <Jerry.Zuo@amd.com>
Cc: Yongzhi Liu <lyz_cs@pku.edu.cn>
Cc: Mikita Lipski <mikita.lipski@amd.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: stable@vger.kernel.org
Reviewed-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Missing SetMGpuFanBoostLimitRpm mapping leads to loading failure for SMU
13.0.7.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Add missing structure to avoid incorrect size and version check.
Signed-off-by: Chengming Gui <Jack.Gui@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Just move the HAS_FLAT_CCS() check into needs_ccs_pages. This also then
fixes i915_ttm_memcpy_allowed() which was incorrectly reporting true on
DG1, even though it doesn't have small-BAR or flat-CCS.

References: https://gitlab.freedesktop.org/drm/intel/-/issues/6605
Fixes: efeb3caf ("drm/i915/ttm: disallow CPU fallback mode for ccs pages")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220905105329.41455-1-matthew.auld@intel.com
(cherry picked from commit 873fef88)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

A lot of modern laptops use the Parade PS8461E MUX for eDP
switching. The MUX can operate in jitter cleaning mode or
redriver mode, the first one resulting in higher link
quality. The jitter cleaning mode needs to know the link
rate used and the MUX achieves this by snooping the
LINK_BW_SET, LINK_RATE_SELECT and SUPPORTED_LINK_RATES
DPCD accesses.

When the MUX is powered down (seems this can happen whenever
the display is turned off) it loses track of the snooped
link rates so when we do the LINK_RATE_SELECT write it no
longer knowns which link rate we're selecting, and thus it
falls back to the lower quality redriver mode. This results
in unstable high link rates (eg. usually 8.1Gbps link rate
no longer works correctly).

In order to avoid all that let's re-snoop SUPPORTED_LINK_RATES
from the sink at the start of every link training.

Unfortunately we don't have a way to detect the presence of
the MUX. It looks like the set of laptops equipped with this
MUX is fairly large and contains devices from multiple
manufacturers. It may also still be growing with new models.
So a quirk doesn't seem like a very easily maintainable
option, thus we shall attempt to do this unconditionally on
all machines that use LINK_RATE_SELECT. Hopefully this extra
DPCD read doesn't cause issues for any unaffected machine.
If that turns out to be the case we'll need to convert this
into a quirk in the future.

Cc: stable@vger.kernel.org
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6205Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220902070319.15395-1-ville.syrjala@linux.intel.comTested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit 25899c59)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

We need to inform PCODE of a desired ring frequencies so PCODE update
the memory frequencies to us. rps->min_freq and rps->max_freq are the
frequencies used in that request. However they were unset when SLPC was
enabled and PCODE never updated the memory freq.

v2 (as Suggested by Ashutosh): if SLPC is in use, let's pick the right
   frequencies from the get_ia_constants instead of the fake init of
   rps' min and max.

v3: don't forget the max <= min return

v4: Move all the freq conversion to intel_rps.c. And the max <= min
    check to where it belongs.

v5: (Ashutosh) Fix old comment s/50 HZ/50 MHz and add a doc explaining
    the "raw format"

Fixes: 7ba79a67 ("drm/i915/guc/slpc: Gate Host RPS when SLPC is enabled")
Cc: <stable@vger.kernel.org> # v5.15+
Cc: Ashutosh Dixit <ashutosh.dixit@intel.com>
Tested-by: Sushma Venkatesh Reddy <sushma.venkatesh.reddy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220831214538.143950-1-rodrigo.vivi@intel.com
(cherry picked from commit 018a7bdb)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Turns out the MIPI sequence block version number and
new block size fields are considered part of the block
header and are not included in the reported new block size
field itself. Bump up the block size appropriately so that
we'll copy over the last five bytes of the block as well.

For this particular machine those last five bytes included
parts of the GPIO op for the backlight on sequence, causing
the backlight no longer to turn back on:

 		Sequence 6 - MIPI_SEQ_BACKLIGHT_ON
 			Delay: 20000 us
-			GPIO index 0, number 0, set 0 (0x00)
+			GPIO index 1, number 70, set 1 (0x01)

Cc: stable@vger.kernel.org
Fixes: e163cfb4 ("drm/i915/bios: Make copies of VBT data blocks")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6652Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220829135834.8585-1-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>
(cherry picked from commit a06289f3)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

[Why]
Ghost BO is released with non-empty bulk move object. There is a
warning trace:
WARNING: CPU: 19 PID: 1582 at ttm/ttm_bo.c:366 ttm_bo_release+0x2e1/0x2f0 [amdttm]
Call Trace:
  amddma_resv_reserve_fences+0x10d/0x1f0 [amdkcl]
  amdttm_bo_put+0x28/0x30 [amdttm]
  amdttm_bo_move_accel_cleanup+0x126/0x200 [amdttm]
  amdgpu_bo_move+0x1a8/0x770 [amdgpu]
  ttm_bo_handle_move_mem+0xb0/0x140 [amdttm]
  amdttm_bo_validate+0xbf/0x100 [amdttm]

[How]
The resource of ghost BO should be moved to LRU directly, instead of
using bulk move. The bulk move object of ghost BO should set to NULL
before function ttm_bo_move_to_lru_tail_unlocked.

v2: set bulk move to NULL manually if no resource associated with ghost BO

Fixed: 5b951e487fd6bf5f ("drm/ttm: fix bulk move handling v2")
Signed-off-by: ZhenGuo Yin <zhenguo.yin@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220906084619.2545456-1-zhenguo.yin@amd.com

Pull powerpc fixes from Michael Ellerman:

 - Fix handling of PCI domains in /proc on 32-bit systems using the
   recently added support for numbering buses from zero for each domain.

 - A fix and a revert for some changes to use READ/WRITE_ONCE() which
   caused problems with KASAN enabled due to sanitisation calls being
   introduced in low-level paths that can't cope with it.

 - Fix build errors on 32-bit caused by the syscall table being
   misaligned sometimes.

 - Two fixes to get IBM Cell native machines booting again, which had
   bit-rotted while my QS22 was temporarily out of action.

 - Fix the papr_scm driver to not assume the order of events returned by
   the hypervisor is stable, and a related compile fix.

Thanks to Aneesh Kumar K.V, Christophe Leroy, Jordan Niethe, Kajol Jain,
Masahiro Yamada, Nathan Chancellor, Pali Rohár, Vaibhav Jain, and Zhouyi
Zhou.

* tag 'powerpc-6.0-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/papr_scm: Ensure rc is always initialized in papr_scm_pmu_register()
  Revert "powerpc/irq: Don't open code irq_soft_mask helpers"
  powerpc: Fix hard_irq_disable() with sanitizer
  powerpc/rtas: Fix RTAS MSR[HV] handling for Cell
  Revert "powerpc: Remove unused FW_FEATURE_NATIVE references"
  powerpc: align syscall table for ppc32
  powerpc/pci: Enable PCI domains in /proc when PCI bus numbers are not unique
  powerpc/papr_scm: Fix nvdimm event mappings

Pull kvm fixes from Paolo Bonzini:
 "s390:

   - PCI interpretation compile fixes

  RISC-V:

   - fix unused variable warnings in vcpu_timer.c

   - move extern sbi_ext declarations to a header

  x86:

   - check validity of argument to KVM_SET_MP_STATE

   - use guest's global_ctrl to completely disable guest PEBS

   - fix a memory leak on memory allocation failure

   - mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES

   - fix build failure with Clang integrated assembler

   - fix MSR interception

   - always flush TLBs when enabling dirty logging"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: x86: check validity of argument to KVM_SET_MP_STATE
  perf/x86/core: Completely disable guest PEBS via guest's global_ctrl
  KVM: x86: fix memoryleak in kvm_arch_vcpu_create()
  KVM: x86: Mask off unsupported and unknown bits of IA32_ARCH_CAPABILITIES
  KVM: s390: pci: Hook to access KVM lowlevel from VFIO
  riscv: kvm: move extern sbi_ext declarations to a header
  riscv: kvm: vcpu_timer: fix unused variable warnings
  KVM: selftests: Fix ambiguous mov in KVM_ASM_SAFE()
  KVM: selftests: Fix KVM_EXCEPTION_MAGIC build with Clang
  KVM: VMX: Heed the 'msr' argument in msr_write_intercepted()
  kvm: x86: mmu: Always flush TLBs when enabling dirty logging
  kvm: x86: mmu: Drop the need_remote_flush() function

-Wformat was recently re-enabled for builds with clang, then quickly
re-disabled, due to concerns stemming from the frequency of default
argument promotion related warning instances.

commit 258fafcd ("Makefile.extrawarn: re-enable -Wformat for clang")
commit 21f9c8a1 ("Revert "Makefile.extrawarn: re-enable -Wformat for clang"")

ISO WG14 has ratified N2562 to address default argument promotion
explicitly for printf, as part of the upcoming ISO C2X standard.

The behavior of clang was changed in clang-16 to not warn for the cited
cases in all language modes.

Add a version check, so that users of clang-16 now get the full effect
of -Wformat. For older clang versions, re-enable flags under the
-Wformat group that way users still get some useful checks related to
format strings, without noisy default argument promotion warnings. I
intentionally omitted -Wformat-y2k and -Wformat-security from being
re-enabled, which are also part of -Wformat in clang-16.

Link: https://github.com/ClangBuiltLinux/linux/issues/378
Link: https://github.com/llvm/llvm-project/issues/57102
Link: https://www.open-std.org/jtc1/sc22/wg14/www/docs/n2562.pdfSuggested-by: Justin Stitt <jstitt007@gmail.com>
Suggested-by: Nathan Chancellor <nathan@kernel.org>
Suggested-by: Youngmin Nam <youngmin.nam@samsung.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull gpio fixes from Bartosz Golaszewski:
 "A a set of fixes from the GPIO subsystem.

  Most are small driver fixes except the realtek-otto driver patch which
  is pretty big but addresses a significant flaw that can cause the CPU
  to stay infinitely busy on uncleared ISR on some platforms.

  Summary:
   - MAINTAINERS update
   - fix resource leaks in gpio-mockup and gpio-pxa
   - add missing locking in gpio-pca953x
   - use 32-bit I/O in gpio-realtek-otto
   - make irq_chip structures immutable in four more drivers"

* tag 'gpio-fixes-for-v6.0-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpio: ws16c48: Make irq_chip immutable
  gpio: 104-idio-16: Make irq_chip immutable
  gpio: 104-idi-48: Make irq_chip immutable
  gpio: 104-dio-48e: Make irq_chip immutable
  gpio: realtek-otto: switch to 32-bit I/O
  gpio: pca953x: Add mutex_lock for regcache sync in PM
  gpio: mockup: remove gpio debugfs when remove device
  gpio: pxa: use devres for the clock struct
  MAINTAINERS: rectify entry for XILINX GPIO DRIVER

Kernel warns about mutable irq_chips:

    "not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Kernel warns about mutable irq_chips:

    "not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Kernel warns about mutable irq_chips:

    "not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Kernel warns about mutable irq_chips:

    "not an immutable chip, please consider fixing!"

Make the struct irq_chip const, flag it as IRQCHIP_IMMUTABLE, add the
new helper functions, and call the appropriate gpiolib functions.
Signed-off-by: William Breathitt Gray <william.gray@linaro.org>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>

Pull xen fixes from Juergen Gross:

 - a minor fix for the Xen grant driver

 - a small series fixing a recently introduced problem in the Xen
   blkfront/blkback drivers with negotiation of feature usage

* tag 'for-linus-6.0-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
  xen/grants: prevent integer overflow in gnttab_dma_alloc_pages()
  xen-blkfront: Cache feature_persistent value before advertisement
  xen-blkfront: Advertise feature-persistent as user requested
  xen-blkback: Advertise feature-persistent as user requested

Merge tag 'loongarch-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson

Pull LoongArch fixes from Huacai Chen:
 "Fix several build errors or warnings, cleanup some code, and adjust
  arch_do_signal_or_restart() to adapt generic entry"

* tag 'loongarch-fixes-6.0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
  LoongArch: mm: Remove the unneeded result variable
  LoongArch: Fix arch_remove_memory() undefined build error
  LoongArch: Fix section mismatch due to acpi_os_ioremap()
  LoongArch: Improve dump_tlb() output messages
  LoongArch: Adjust arch_do_signal_or_restart() to adapt generic entry
  LoongArch: Avoid orphan input sections

Pull s390 fixes from Vasily Gorbik:

 - Update defconfigs

 - Fix linker script to align nospec tables correctly to avoid
   potentially unbootable kernel with some config options

 - Fix alignment check in prepare_hugepage_range() for 2GB hugepages to
   avoid BUG in __unmap_hugepage_range() for unaligned mappings later

 - Remove useless hugepage address alignment in hugetlb fault handling

* tag 's390-6.0-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/hugetlb: fix prepare_hugepage_range() check for 2 GB hugepages
  s390: update defconfigs
  s390: fix nospec table alignments
  s390/mm: remove useless hugepage address alignment

Pull input fixes from Dmitry Torokhov:

 - GT1158 ID added to Goodix touchscreen driver

 - Boeder Force Feedback Wheel USB added to iforce joystick driver

 - fixup for iforce driver to avoid hangups

 - fix autoloading of rk805-pwrkey driver.

* tag 'input-for-v6.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: iforce - add support for Boeder Force Feedback Wheel
  Input: iforce - wake up after clearing IFORCE_XMIT_RUNNING flag
  Input: goodix - add compatible string for GT1158
  MAINTAINERS: add include/dt-bindings/input to INPUT DRIVERS
  Input: rk805-pwrkey - fix module autoloading
  Input: goodix - add support for GT1158
  dt-bindings: input: touchscreen: add compatible string for Goodix GT1158