- 01 Mar, 2007 12 commits
-
-
David Howells authored
FRV does not require a ZONE_DMA, so all DMA'able pages that aren't highmem should be in ZONE_NORMAL. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
NeilBrown authored
i.e. one or more drives can be added and the array will re-stripe while on-line. Most of the interesting work was already done for raid5. This just extends it to raid6. mdadm newer than 2.6 is needed for complete safety, however any version of mdadm which support raid5 reshape will do a good enough job in almost all cases (an 'echo repair > /sys/block/mdX/md/sync_action' is recommended after a reshape that was aborted and had to be restarted with an such a version of mdadm). Signed-off-by:
Neil Brown <neilb@suse.de> Signed-off-by:
-
NeilBrown authored
An error always aborts any resync/recovery/reshape on the understanding that it will immediately be restarted if that still makes sense. However a reshape currently doesn't get restarted. With this patch it does. To avoid restarting when it is not possible to do work, we call into the personality to check that a reshape is ok, and strengthen raid5_check_reshape to fail if there are too many failed devices. We also break some code out into a separate function: remove_and_add_spares as the indent level for that code was getting crazy. Signed-off-by:
-
NeilBrown authored
The mddev and queue might be used for another array which does not set these, so they need to be cleared. Signed-off-by:
-
NeilBrown authored
md tries to warn the user if they e.g. create a raid1 using two partitions of the same device, as this does not provide true redundancy. However it also warns if a raid0 is created like this, and there is nothing wrong with that. At the place where the warning is currently printer, we don't necessarily know what level the array will be, so move the warning from the point where the device is added to the point where the array is started. Signed-off-by:
-
H. Peter Anvin authored
- Use kernel_fpu_begin() and kernel_fpu_end() - Use boot_cpu_has() for feature testing even in userspace Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
NeilBrown authored
There are two errors that can lead to recovery problems with raid10 when used in 'far' more (not the default). Due to a '>' instead of '>=' the wrong block is located which would result in garbage being written to some random location, quite possible outside the range of the device, causing the newly reconstructed device to fail. The device size calculation had some rounding errors (it didn't round when it should) and so recovery would go a few blocks too far which would again cause a write to a random block address and probably a device error. The code for working with device sizes was fairly confused and spread out, so this has been tided up a bit. Signed-off-by:
-
NeilBrown authored
If register_blkdev() or alloc-disk fail in mm_init() after pci_register_driver() succeeds, then mm_pci_driver is not unregistered properly: Cc: Philip Guo <pg@cs.stanford.edu> Signed-off-by:
-
Adrian Bunk authored
Signed-off-by:
Adrian Bunk <bunk@stusta.de> Cc: Ben Dooks <ben-linux@fluff.org> Signed-off-by:
-
Adrian Bunk authored
shmem_{nopage,mmap} are no longer used in ipc/shm.c Signed-off-by: -
Adrian Bunk authored
shm_nopage() can become static. Signed-off-by:
Eric W. Biederman <ebiederm@xmission.com> Signed-off-by:
-
Adrian Bunk authored
CONFIG_ALIGNMENT_TRAP is never set on arm26. Signed-off-by:
Ian Molton <spyro@f2s.com> Signed-off-by:
-
- 28 Feb, 2007 2 commits
-
-
Eric W. Biederman authored
When removing set_native_irq I missed the fact that it was called in a couple of places that were compiled even when SMP support is disabled. And since the irq_desc[].affinity field only exists in SMP things broke. Thanks to Simon Arlott <simon@arlott.org> for spotting this. There are a couple of ways to fix this but the simplest one is to just remove the assignments. The affinity field is only used to display a value to the user, and nothing on either i386 or x86_64 reads it or depends on it being any particlua value, so skipping the assignment is safe. The assignment that is being removed is just for the initial affinity value before the user explicitly sets it. The irq_desc array initializes this field to CPU_MASK_ALL so the field is initialized to a reasonable value in the SMP case without being set. Signed-off-by:
-
Linus Torvalds authored
Too many changes for comfort since -rc1. Some missed merges, and some just annoyingly big fixes since. This is not how an -rc2 should look. Need to really calm things down!
-
- 27 Feb, 2007 26 commits
-
-
David S. Miller authored
When the PCI controller OBP node lacks an interrupt-map and interrupt-map-mask property, we need to form the INO by hand. The PCI swizzle logic was not doing that properly. This was a regression added by the of_device code. Signed-off-by:David S. Miller <davem@davemloft.net>
-
Linus Torvalds authored
* master.kernel.org:/pub/scm/linux/kernel/git/davej/agpgart: [AGPGART] fix compile errors
-
Linus Torvalds authored
* 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: (52 commits) netxen: do_rom_fast_write error handling natsemi: Fix detection of vanilla natsemi cards net: remove a collection of unneeded #undef REALLY_SLOW_IO stuff chelsio: Fix non-NAPI compile cxgb3 - Feed Rx free list with pages cxgb3 - Recovery from HW starvation of response queue entries. cxgb3 - Unmap offload packets when they are freed cxgb3 - FW version update cxgb3 - private ioctl cleanup cxgb3 - manage sysfs attributes per port S2IO: Restoring the mac address in s2io_reset S2IO: Avoid printing the Enhanced statistics for Xframe I card. S2IO: Making LED off during LINK_DOWN notification. S2IO: Added a loadable parameter to enable or disable vlan stripping in frame. S2IO: Optimized the delay to wait for command completion S2IO: Fixes for MSI and MSIX qla3xxx: Bumping driver version number qla3xxx: Kernic Panic on pSeries under stress conditions qla3xxx: bugfix tx reset after stress conditions. qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() ...
-
Linus Torvalds authored
* 'jffs-maint' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/misc-2.6: remove the jffs MAINTAINERS entry
-
Stephen Hemminger authored
Compiler warning spots real error! The function do_rom_fast_read called in do_rom_fast_write can fail and leave data1 unset. This causes a compile warning. The correct thing is to propagate the error out. Signed-off-by:
Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by:
Jeff Garzik <jeff@garzik.org>
-
Adrian Bunk authored
This patch removes the MAINTAINERS entry for the removed jffs filesystem. Signed-off-by:
-
Mark Brown authored
Bob Tracy <rct@gherkin.frus.com> reported that the addition of support for Aculab E1/T1 cPCI carrier cards broke detection of vanilla natsemi cards. This patch fixes that: the problem is that the driver-specific ta in the PCI device table is an index into a second table and this had not been updated for the vanilla cards. This patch fixes the problem minimally. Signed-Off-By:
Mark Brown <broonie@sirena.org.uk> Signed-off-by:
-
Alan authored
Signed-off-by:
Alan Cox <alan@redhat.com> Signed-off-by:
-
Roland Dreier authored
Chelsio without NAPI enabled has been broken (won't compile) since 3de00b89 ("chelsio: NAPI speed improvement"): drivers/net/chelsio/sge.c: In function `t1_interrupt`: drivers/net/chelsio/sge.c:1716: error: `Q` undeclared (first use in this function) The change below seems to add back in the declaration and initialization of `Q` that was removed by mistake, and at least makes the driver compile for me, although I have no hardware and hence no way to test whether this actually works. Signed-off-by:
Roland Dreier <rolandd@cisco.com> Signed-off-by:
-
Divy Le Ray authored
Populate Rx free list with pages. Signed-off-by:
Divy Le Ray <divy@chelsio.com> Signed-off-by:
-
Divy Le Ray authored
Improve the traffic recovery after the HW ran out of response queue entries. Signed-off-by:
-
Divy Le Ray authored
Offload packets may be DMAed long after their SGE Tx descriptors are done so they must remain mapped until they are freed rather than until their descriptors are freed. Unmap such packets through an skb destructor. Signed-off-by:
-
Divy Le Ray authored
Update FW version to 3.2 Signed-off-by:
-
Divy Le Ray authored
Clean up some private ioctls. Signed-off-by:
-
Divy Le Ray authored
sysfs attributes are now managed per port, no longer per adapter. Signed-off-by:
-
Sivakumar Subramani authored
- Restore in s2io_reset, the mac address assigned during s2io_open. Earlier, it was getting overwritten to the factory default (read from the eeprom) and subsequently dropping received frames. - Fixed the typo in calling rtnl_unlock in s2io_set_link function. Signed-off-by:
Sivakumar Subramani <sivakumar.subramani@neterion.com> Signed-off-by:
-
Sivakumar Subramani authored
- Enhanced Statistics are supported only for Xframe II (Herculas) card. Add condition check such Enhanced statistics will included only in the case of Xframe II card. Signed-off-by:
-
Sivakumar Subramani authored
- Turning off LED for LINK_DOWN notification - Return from rxd_owner_bit_reset function if call to set_rxd_buffer_pointer fails with ENOMEM Signed-off-by:
-
Sivakumar Subramani authored
- Added code to not to strip vlan tag when driver is in promiscuous mode - Added module loadable parameter 'vlan_tag_strip" through which user can enable or disable vlan stripping irrespective of mode ( promiscuous or non-promiscuous ). Signed-off-by:
-
Sivakumar Subramani authored
- Optimized delay to wait for command completion so as to reduce the initialization wait time. - Disable differentiated services steering. By default RMAC is configured to steer traffic with certain DS codes to other queues. Driver must initialize the DS memory to 0 to make sure that DS steering will not be used by default. Signed-off-by:
-
Sivakumar Subramani authored
- Added debug statements to print a debug message if the MSI/MSI-X vector (or) data is zero. - This patch removes the code that will enable NAPI for the case of single ring and MSI-X / MSI case. There are some issue in the enabling NAPI with MSI/MSI-X. So we are turning off NAPI in the case of MSI/MSI-X. Signed-off-by:
-
Benjamin Li authored
Signed-off-by:
Benjamin Li <benjamin.li@qlogic.com> Signed-off-by:
Ron Mercer <ron.mercer@qlogic.com> Signed-off-by:
-
Benjamin Li authored
To reproduce this panic consistently, we run an intensive network application like 'netperf'. After waiting for a couple of seconds, you will see a stack trace and a kernel panic where we are calling pci_unmap_single() in ql_poll(). Changes: 1) Check the flags on the Response MAC IO Control block to check for errors 2) Ensure that if we are on the 4022 we only use one segment 3) Before, we were reading the memory mapped producer index register everytime we iterated in the loop when clearing the queue. We should only be iterating to a known point, not as the producer index is being updated. Signed-off-by:
-
Ron Mercer authored
To Reproduce the Problem: To reproduce this panic consistently, we run an intensive network application like 'netperf' and then switch to a different console. After waiting for a couple of seconds, you will see a tx reset has occured. Reason: We enable interrupts even if we were not running. Solution: Now we will enable interrupts only after we are ready to give up the poll routine. Signed-off-by:
-
Benjamin Li authored
qla3xxx: Check return code from pci_map_single() in ql_release_to_lrg_buf_free_list(), ql_populate_free_queue(), ql_alloc_large_buffers(), and ql3xxx_send() pci_map_single() could fail. We need to properly check the return code from pci_map_single(). If we can not properly map this address, then we should cleanup and return the proper return code. Signed-off-by:
-
Ron Mercer authored
The scatter/gather lists were not being build correctly. When large frames spanned several buffers the chip would panic. Signed-off-by:
-
