Marvell armada37xx, armada7k and armada8k share the same
AHCI sata controller IP, and currently there is an issue
(Errata Ref#226)that the SATA can not be detected via SATA
Port-MultiPlayer(PMP). After debugging, the reason is
found that the value of Port-x FIS-based Switching Control
(PxFBS@0x40) became wrong.
According to design, the bits[11:8, 0] of register PxFBS
are cleared when Port Command and Status (0x18) bit[0]
changes its value from 1 to 0, i.e. falling edge of Port
Command and Status bit[0] sends PULSE that resets PxFBS
bits[11:8; 0].
So it needs save the port PxFBS register before PxCMD
ST write and restore the port PxFBS register afterwards
in ahci_stop_engine().

This commit allows drivers to override ahci_stop_engine
behavior for use by the Marvell AHCI driver(and potentially
other drivers in the future).
Signed-off-by: Evan Wang <xswang@marvell.com>
Cc: Ofer Heifetz <oferh@marvell.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

This reverts commit f0f56716.

According to Thierry's view,
https://www.spinics.net/lists/linux-ide/msg55357.html
some hardware-specific drivers already use their own resets,
and the common reset might make a path to occur double controls of resets.

For now, revert the commit that adds reset control support to ahci-platform,
and hold until the solution is confirmed not be affect all hardware-specific
drivers.

Fixes: f0f56716 ("ata: ahci-platform: add reset control support")
Reported-by: Thierry Reding <thierry.reding@gmail.com>
Suggested-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Tejun Heo <tj@kernel.org>

Pull vfs namei updates from Al Viro:

 - make lookup_one_len() safe with parent locked only shared(incoming
   afs series wants that)

 - fix of getname_kernel() regression from 2015 (-stable fodder, that
   one).

* 'work.namei' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  getname_kernel() needs to make sure that ->name != ->iname in long case
  make lookup_one_len() safe to use with directory locked shared
  new helper: __lookup_slow()
  merge common parts of lookup_one_len{,_unlocked} into common helper

Pull orangefs updates from Mike Marshall:
 "Fixes and cleanups:

   - Documentation cleanups

   - removal of unused code

   - make some structs static

   - implement Orangefs vm_operations fault callout

   - eliminate two single-use functions and put their cleaned up code in
     line.

   - replace a vmalloc/memset instance with vzalloc

   - fix a race condition bug in wait code"

* tag 'for-linus-4.17-ofs' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
  Orangefs: documentation updates
  orangefs: document package install and xfstests procedure
  orangefs: remove unused code
  orangefs: make several *_operations structs static
  orangefs: implement vm_ops->fault
  orangefs: open code short single-use functions
  orangefs: replace vmalloc and memset with vzalloc
  orangefs: bug fix for a race condition when getting a slot

Pull pstore fix from Kees Cook:
 "Fix another compression Kconfig combination missed in testing (Tobias
  Regnery)"

* tag 'pstore-v4.17-rc1-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
  pstore: fix crypto dependencies without compression

Commit 0619f0f5 ("selinux: wrap selinuxfs state") triggers a BUG
when SELinux is runtime-disabled (i.e. systemd or equivalent disables
SELinux before initial policy load via /sys/fs/selinux/disable based on
/etc/selinux/config SELINUX=disabled).

This does not manifest if SELinux is disabled via kernel command line
argument or if SELinux is enabled (permissive or enforcing).

Before:
  SELinux:  Disabled at runtime.
  BUG: Dentry 000000006d77e5c7{i=17,n=null}  still in use (1) [unmount of selinuxfs selinuxfs]

After:
  SELinux:  Disabled at runtime.

Fixes: 0619f0f5 ("selinux: wrap selinuxfs state")
Reported-by: Tetsuo Handa <penguin-kernel@i-love.sakura.ne.jp>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Signed-off-by: Stephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull kvm updates from Paolo Bonzini:
 "ARM:
   - VHE optimizations

   - EL2 address space randomization

   - speculative execution mitigations ("variant 3a", aka execution past
     invalid privilege register access)

   - bugfixes and cleanups

  PPC:
   - improvements for the radix page fault handler for HV KVM on POWER9

  s390:
   - more kvm stat counters

   - virtio gpu plumbing

   - documentation

   - facilities improvements

  x86:
   - support for VMware magic I/O port and pseudo-PMCs

   - AMD pause loop exiting

   - support for AMD core performance extensions

   - support for synchronous register access

   - expose nVMX capabilities to userspace

   - support for Hyper-V signaling via eventfd

   - use Enlightened VMCS when running on Hyper-V

   - allow userspace to disable MWAIT/HLT/PAUSE vmexits

   - usual roundup of optimizations and nested virtualization bugfixes

  Generic:
   - API selftest infrastructure (though the only tests are for x86 as
     of now)"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (174 commits)
  kvm: x86: fix a prototype warning
  kvm: selftests: add sync_regs_test
  kvm: selftests: add API testing infrastructure
  kvm: x86: fix a compile warning
  KVM: X86: Add Force Emulation Prefix for "emulate the next instruction"
  KVM: X86: Introduce handle_ud()
  KVM: vmx: unify adjacent #ifdefs
  x86: kvm: hide the unused 'cpu' variable
  KVM: VMX: remove bogus WARN_ON in handle_ept_misconfig
  Revert "KVM: X86: Fix SMRAM accessing even if VM is shutdown"
  kvm: Add emulation for movups/movupd
  KVM: VMX: raise internal error for exception during invalid protected mode state
  KVM: nVMX: Optimization: Dont set KVM_REQ_EVENT when VMExit with nested_run_pending
  KVM: nVMX: Require immediate-exit when event reinjected to L2 and L1 event pending
  KVM: x86: Fix misleading comments on handling pending exceptions
  KVM: x86: Rename interrupt.pending to interrupt.injected
  KVM: VMX: No need to clear pending NMI/interrupt on inject realmode interrupt
  x86/kvm: use Enlightened VMCS when running on Hyper-V
  x86/hyper-v: detect nested features
  x86/hyper-v: define struct hv_enlightened_vmcs and clean field bits
  ...

Commit 3c8ba0d6 ("kernel.h: Retain constant expression output for
max()/min()") rewrote our min/max macros to be very clever, but in the
meantime resurrected a variable name shadow issue that we had had
previously fixed in commit 589a9785 ("min/max: remove sparse
warnings when they're nested").

That commit talks about the sparse warnings that this shadowing causes,
which we ignored as just a minor annoyance.  But it turns out that the
sparse warning is the least of our problems.  We actually have a real
bug due to the shadowing through the interaction with "min_not_zero()",
which ends up doing

   min(__x, __y)

internally, and then the new declaration of "__x" and "__y" as new
variables in __cmp_once() results in a complete mess of an expression,
and "min_not_zero()" doesn't work at all.

For some odd reason, this only ever caused (reported) problems on s390,
even though it is a generic issue and most of the (obviously successful)
testing of the problematic commit had happened on other architectures.

Quoting Sebastian Ott:
 "What happened is that the bio build by the partition detection code
  was attempted to be split by the block layer because the block queue
  had a max_sector setting of 0. blk_queue_max_hw_sectors uses
  min_not_zero."

So re-introduce the use of __UNIQUE_ID() to make sure that the min/max
macros do not have these kinds of clashes.

[ That said, __UNIQUE_ID() itself has several issues that make it less
  than wonderful.

  In particular, the "uniqueness" has a fallback on the line number,
  which means that it's not actually unique in more complex cases if you
  don't build with gcc or clang (which have working unique counters that
  aren't tied to line numbers).

  That historical broken fallback also means that we have that pointless
  "prefix" argument that doesn't actually make much sense _except_ for
  the known-broken case. Oh well. ]

Fixes: 3c8ba0d6 ("kernel.h: Retain constant expression output for max()/min()")
Reported-and-tested-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Miguel Ojeda <miguel.ojeda.sandonis@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull ARM SA1100 updates from Russell King:
 "We have support for arbitary MMIO registers providing platform GPIOs,
  which allows us to abstract some of the SA11x0 CF support.

  This set of updates makes that change"

* 'for-linus-sa1100' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: sa1100/simpad: switch simpad CF to use gpiod APIs
  ARM: sa1100/shannon: convert to generic CF sockets
  ARM: sa1100/nanoengine: convert to generic CF sockets
  ARM: sa1100/h3xxx: switch h3xxx PCMCIA to use gpiod APIs
  ARM: sa1100/cerf: convert to generic CF sockets
  ARM: sa1100/assabet: convert to generic CF sockets
  ARM: sa1100: provide infrastructure to support generic CF sockets
  pcmcia: sa1100: provide generic CF support

Pull ARM updates from Russell King:
 "A number of core ARM changes:

   - Refactoring linker script by Nicolas Pitre

   - Enable source fortification

   - Add support for Cortex R8"

* 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: decompressor: fix warning introduced in fortify patch
  ARM: 8751/1: Add support for Cortex-R8 processor
  ARM: 8749/1: Kconfig: Add ARCH_HAS_FORTIFY_SOURCE
  ARM: simplify and fix linker script for TCM
  ARM: linker script: factor out TCM bits
  ARM: linker script: factor out vectors and stubs
  ARM: linker script: factor out unwinding table sections
  ARM: linker script: factor out stuff for the .text section
  ARM: linker script: factor out stuff for the DISCARD section
  ARM: linker script: factor out some common definitions between XIP and non-XIP

Pull m68knommu update from Greg Ungerer:
 "Only a single fix to set the DMA masks in the ColdFire FEC platform
  data structure.

  This stops the warning from dma-mapping.h at boot time"

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k: set dma and coherent masks for platform FEC ethernets

Pull alpha updates from Matt Turner:
 "A few small changes for alpha"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
  alpha: io: reorder barriers to guarantee writeX() and iowriteX() ordering
  alpha: Implement CPU vulnerabilities sysfs functions.
  alpha: rtc: stop validating rtc_time in .read_time
  alpha: rtc: remove unused set_mmss ops

Pull s390 updates from Martin Schwidefsky:

 - Improvements for the spectre defense:
    * The spectre related code is consolidated to a single file
      nospec-branch.c
    * Automatic enable/disable for the spectre v2 defenses (expoline vs.
      nobp)
    * Syslog messages for specve v2 are added
    * Enable CONFIG_GENERIC_CPU_VULNERABILITIES and define the attribute
      functions for spectre v1 and v2

 - Add helper macros for assembler alternatives and use them to shorten
   the code in entry.S.

 - Add support for persistent configuration data via the SCLP Store Data
   interface. The H/W interface requires a page table that uses 4K pages
   only, the code to setup such an address space is added as well.

 - Enable virtio GPU emulation in QEMU. To do this the depends
   statements for a few common Kconfig options are modified.

 - Add support for format-3 channel path descriptors and add a binary
   sysfs interface to export the associated utility strings.

 - Add a sysfs attribute to control the IFCC handling in case of
   constant channel errors.

 - The vfio-ccw changes from Cornelia.

 - Bug fixes and cleanups.

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (40 commits)
  s390/kvm: improve stack frame constants in entry.S
  s390/lpp: use assembler alternatives for the LPP instruction
  s390/entry.S: use assembler alternatives
  s390: add assembler macros for CPU alternatives
  s390: add sysfs attributes for spectre
  s390: report spectre mitigation via syslog
  s390: add automatic detection of the spectre defense
  s390: move nobp parameter functions to nospec-branch.c
  s390/cio: add util_string sysfs attribute
  s390/chsc: query utility strings via fmt3 channel path descriptor
  s390/cio: rename struct channel_path_desc
  s390/cio: fix unbind of io_subchannel_driver
  s390/qdio: split up CCQ handling for EQBS / SQBS
  s390/qdio: don't retry EQBS after CCQ 96
  s390/qdio: restrict buffer merging to eligible devices
  s390/qdio: don't merge ERROR output buffers
  s390/qdio: simplify math in get_*_buffer_frontier()
  s390/decompressor: trim uncompressed image head during the build
  s390/crypto: Fix kernel crash on aes_s390 module remove.
  s390/defkeymap: fix global init to zero
  ...

missed it in "kill struct filename.separate" several years ago.

Cc: stable@vger.kernel.org
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>

Merge branch 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security

Pull integrity updates from James Morris:
 "A mixture of bug fixes, code cleanup, and continues to close
  IMA-measurement, IMA-appraisal, and IMA-audit gaps.

  Also note the addition of a new cred_getsecid LSM hook by Matthew
  Garrett:

     For IMA purposes, we want to be able to obtain the prepared secid
     in the bprm structure before the credentials are committed. Add a
     cred_getsecid hook that makes this possible.

  which is used by a new CREDS_CHECK target in IMA:

     In ima_bprm_check(), check with both the existing process
     credentials and the credentials that will be committed when the new
     process is started. This will not change behaviour unless the
     system policy is extended to include CREDS_CHECK targets -
     BPRM_CHECK will continue to check the same credentials that it did
     previously"

* 'next-integrity' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  ima: Fallback to the builtin hash algorithm
  ima: Add smackfs to the default appraise/measure list
  evm: check for remount ro in progress before writing
  ima: Improvements in ima_appraise_measurement()
  ima: Simplify ima_eventsig_init()
  integrity: Remove unused macro IMA_ACTION_RULE_FLAGS
  ima: drop vla in ima_audit_measurement()
  ima: Fix Kconfig to select TPM 2.0 CRB interface
  evm: Constify *integrity_status_msg[]
  evm: Move evm_hmac and evm_hash from evm_main.c to evm_crypto.c
  fuse: define the filesystem as untrusted
  ima: fail signature verification based on policy
  ima: clear IMA_HASH
  ima: re-evaluate files on privileged mounted filesystems
  ima: fail file signature verification on non-init mounted filesystems
  IMA: Support using new creds in appraisal policy
  security: Add a cred_getsecid hook

Pull TPM updates from James Morris:
 "This release contains only bug fixes. There are no new major features
  added"

* 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  tpm: fix intermittent failure with self tests
  tpm: add retry logic
  tpm: self test failure should not cause suspend to fail
  tpm2: add longer timeouts for creation commands.
  tpm_crb: use __le64 annotated variable for response buffer address
  tpm: fix buffer type in tpm_transmit_cmd
  tpm: tpm-interface: fix tpm_transmit/_cmd kdoc
  tpm: cmd_ready command can be issued only after granting locality

Pull smack update from James Morris:
 "One small change for Automotive Grade Linux"

* 'next-smack' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  Smack: Handle CGROUP2 in the same way that CGROUP

memory-barriers.txt has been updated with the following requirement.

"When using writel(), a prior wmb() is not needed to guarantee that the
cache coherent memory writes have completed before writing to the MMIO
region."

Current writeX() and iowriteX() implementations on alpha are not
satisfying this requirement as the barrier is after the register write.

Move mb() in writeX() and iowriteX() functions to guarantee that HW
observes memory changes before performing register operations.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Reported-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Implement the CPU vulnerabilty show functions for meltdown, spectre_v1
and spectre_v2 on Alpha.

Tests on XP1000 (EV67/667MHz) and ES45 (EV68CB/1.25GHz) show them
to be vulnerable to Meltdown and Spectre V1.  In the case of
Meltdown I saw a 1 to 2% success rate in reading bytes on the
XP1000 and 50 to 60% success rate on the ES45. (This compares to
99.97% success reported for Intel CPUs.)  Report EV6 and later
CPUs as vulnerable.

Tests on PWS600au (EV56/600MHz) for Spectre V1 attack were
unsuccessful (though I did not try particularly hard) so mark EV4
through to EV56 as not vulnerable.
Signed-off-by: Michael Cree <mcree@orcon.net.nz>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The RTC core is always calling rtc_valid_tm after the read_time callback.
It is not necessary to call it just before returning from the callback.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

The .set_mmss and .setmmss64 ops are only called when the RTC is not
providing an implementation for the .set_time callback.

On alpha, .set_time is provided so .set_mmss64 is never called. Remove the
unused code.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Matt Turner <mattst88@gmail.com>

Pull alpha syscall cleanups from Al Viro:
 "A couple of SYSCALL_DEFINE conversions and removal of pointless (and
  bitrotted) piece stuck in ret_from_kernel_thread since the
  kernel_exceve/kernel_thread conversions six years ago"

* 'misc.compat' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  alpha: get rid of pointless insn in ret_from_kernel_thread
  alpha: switch pci syscalls to SYSCALL_DEFINE

Pull sparc syscall cleanups from Al Viro:
 "sparc syscall stuff - killing pointless wrappers, conversions to
  {COMPAT_,}SYSCALL_DEFINE"

* 'misc.sparc' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  sparc: get rid of asm wrapper for nis_syscall()
  sparc: switch compat {f,}truncate64() to COMPAT_SYSCALL_DEFINE
  sparc: switch compat pread64 and pwrite64 to COMPAT_SYSCALL_DEFINE
  convert compat sync_file_range() to COMPAT_SYSCALL_DEFINE
  switch sparc_remap_file_pages() to SYSCALL_DEFINE
  sparc: get rid of memory_ordering(2) wrapper
  sparc: trivial conversions to {COMPAT_,}SYSCALL_DEFINE()
  sparc: bury a zombie extern that had been that way for twenty years
  sparc: get rid of remaining SIGN... wrappers
  sparc: kill useless SIGN... wrappers
  sparc: get rid of sys_sparc_pipe() wrappers

Joe Perches noted that we have a few source files that for some
inexplicable reason (read: I'm too lazy to even go look at the history)
are marked executable:

  drivers/gpu/drm/amd/amdgpu/vce_v4_0.c
  drivers/net/ethernet/cadence/macb_ptp.c

A simple git command line to show executable C/asm/header files is this:

    git ls-files -s '*.[chsS]' | grep '^100755'

and then you can fix them up with scripting by just feeding that output
into:

    | cut -f2 | xargs chmod -x

and commit it.

Which is exactly what this commit does.
Reported-by: Joe Perches <joe@perches.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull i2c updates from Wolfram Sang:

 -I2C core now reports proper OF style module alias. I'd like to repeat
  the note from the commit msg here (Thanks, Javier!):

      NOTE: This patch may break out-of-tree drivers that were relying
            on this behavior, and only had an I2C device ID table even
            when the device was registered via OF.

            There are no remaining drivers in mainline that do this, but
            out-of-tree drivers have to be fixed and define a proper OF
            device ID table to have module auto-loading working.

 - new driver for the SynQuacer I2C controller

 - major refactoring of the QUP driver

 - the piix4 driver now uses request_muxed_region which should fix a
   long standing resource conflict with the sp5100_tco watchdog

 - a bunch of small core & driver improvements

* 'i2c/for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (53 commits)
  i2c: add support for Socionext SynQuacer I2C controller
  dt-bindings: i2c: add binding for Socionext SynQuacer I2C
  i2c: Update i2c_trace_msg static key to modern api
  i2c: fix parameter of trace_i2c_result
  i2c: imx: avoid taking clk_prepare mutex in PM callbacks
  i2c: imx: use clk notifier for rate changes
  i2c: make i2c_check_addr_validity() static
  i2c: rcar: fix mask value of prohibited bit
  dt-bindings: i2c: document R8A77965 bindings
  i2c: pca-platform: drop gpio from platform data
  i2c: pca-platform: use device_property_read_u32
  i2c: pca-platform: unconditionally use devm_gpiod_get_optional
  sh: sh7785lcr: add GPIO lookup table for i2c controller reset
  i2c: qup: reorganization of driver code to remove polling for qup v2
  i2c: qup: reorganization of driver code to remove polling for qup v1
  i2c: qup: send NACK for last read sub transfers
  i2c: qup: fix buffer overflow for multiple msg of maximum xfer len
  i2c: qup: change completion timeout according to transfer length
  i2c: qup: use the complete transfer length to choose DMA mode
  i2c: qup: proper error handling for i2c error in BAM mode
  ...

Pull powerpc updates from Michael Ellerman:
 "Notable changes:

   - Support for 4PB user address space on 64-bit, opt-in via mmap().

   - Removal of POWER4 support, which was accidentally broken in 2016
     and no one noticed, and blocked use of some modern instructions.

   - Workarounds so that the hypervisor can enable Transactional Memory
     on Power9.

   - A series to disable the DAWR (Data Address Watchpoint Register) on
     Power9.

   - More information displayed in the meltdown/spectre_v1/v2 sysfs
     files.

   - A vpermxor (Power8 Altivec) implementation for the raid6 Q
     Syndrome.

   - A big series to make the allocation of our pacas (per cpu area),
     kernel page tables, and per-cpu stacks NUMA aware when using the
     Radix MMU on Power9.

  And as usual many fixes, reworks and cleanups.

  Thanks to: Aaro Koskinen, Alexandre Belloni, Alexey Kardashevskiy,
  Alistair Popple, Andy Shevchenko, Aneesh Kumar K.V, Anshuman Khandual,
  Balbir Singh, Benjamin Herrenschmidt, Christophe Leroy, Christophe
  Lombard, Cyril Bur, Daniel Axtens, Dave Young, Finn Thain, Frederic
  Barrat, Gustavo Romero, Horia Geantă, Jonathan Neuschäfer, Kees Cook,
  Larry Finger, Laurent Dufour, Laurent Vivier, Logan Gunthorpe,
  Madhavan Srinivasan, Mark Greer, Mark Hairgrove, Markus Elfring,
  Mathieu Malaterre, Matt Brown, Matt Evans, Mauricio Faria de Oliveira,
  Michael Neuling, Naveen N. Rao, Nicholas Piggin, Paul Mackerras,
  Philippe Bergheaud, Ram Pai, Rob Herring, Sam Bobroff, Segher
  Boessenkool, Simon Guo, Simon Horman, Stewart Smith, Sukadev
  Bhattiprolu, Suraj Jitindar Singh, Thiago Jung Bauermann, Vaibhav
  Jain, Vaidyanathan Srinivasan, Vasant Hegde, Wei Yongjun"

* tag 'powerpc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (207 commits)
  powerpc/64s/idle: Fix restore of AMOR on POWER9 after deep sleep
  powerpc/64s: Fix POWER9 DD2.2 and above in cputable features
  powerpc/64s: Fix pkey support in dt_cpu_ftrs, add CPU_FTR_PKEY bit
  powerpc/64s: Fix dt_cpu_ftrs to have restore_cpu clear unwanted LPCR bits
  Revert "powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead"
  powerpc: iomap.c: introduce io{read|write}64_{lo_hi|hi_lo}
  powerpc: io.h: move iomap.h include so that it can use readq/writeq defs
  cxl: Fix possible deadlock when processing page faults from cxllib
  powerpc/hw_breakpoint: Only disable hw breakpoint if cpu supports it
  powerpc/mm/radix: Update command line parsing for disable_radix
  powerpc/mm/radix: Parse disable_radix commandline correctly.
  powerpc/mm/hugetlb: initialize the pagetable cache correctly for hugetlb
  powerpc/mm/radix: Update pte fragment count from 16 to 256 on radix
  powerpc/mm/keys: Update documentation and remove unnecessary check
  powerpc/64s/idle: POWER9 ESL=0 stop avoid save/restore overhead
  powerpc/64s/idle: Consolidate power9_offline_stop()/power9_idle_stop()
  powerpc/powernv: Always stop secondaries before reboot/shutdown
  powerpc: hard disable irqs in smp_send_stop loop
  powerpc: use NMI IPI for smp_send_stop
  powerpc/powernv: Fix SMT4 forcing idle code
  ...

Pull leaking-addresses updates from Tobin Harding:
 "This set represents improvements to the scripts/leaking_addresses.pl
  script.

  The major improvement is that with this set applied the script
  actually runs in a reasonable amount of time (less than a minute on a
  standard stock Ubuntu user desktop). Also, we have a second maintainer
  now and a tree hosted on kernel.org

  We do a few code clean ups. We fix the command help output. Handling
  of the vsyscall address range is fixed to check the whole range
  instead of just the start/end addresses. We add support for 5 page
  table levels (suggested on LKML). We use a system command to get the
  machine architecture instead of using Perl. Calling this command for
  every regex comparison is what previously choked the script, caching
  the result of this call gave the major speed improvement. We add
  support for scanning 32-bit kernels using the user/kernel memory
  split. Path skipping code refactored and simplified (meaning easier
  script configuration). We remove version numbering. We add a variable
  name to improve readability of a regex and finally we check filenames
  for leaking addresses.

  Currently script scans /proc/PID for all PID. With this set applied we
  only scan for PID==1. It was observed that on an idle system files
  under /proc/PID are predominantly the same for all processes. Also it
  was noted that the script does not scan _all_ the kernel since it only
  scans active processes. Scanning only for PID==1 makes explicit the
  inherent flaw in the script that the scan is only partial and also
  speeds things up"

* tag 'leaks-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tobin/leaks:
  MAINTAINERS: Update LEAKING_ADDRESSES
  leaking_addresses: check if file name contains address
  leaking_addresses: explicitly name variable used in regex
  leaking_addresses: remove version number
  leaking_addresses: skip '/proc/1/syscall'
  leaking_addresses: skip all /proc/PID except /proc/1
  leaking_addresses: cache architecture name
  leaking_addresses: simplify path skipping
  leaking_addresses: do not parse binary files
  leaking_addresses: add 32-bit support
  leaking_addresses: add is_arch() wrapper subroutine
  leaking_addresses: use system command to get arch
  leaking_addresses: add support for 5 page table levels
  leaking_addresses: add support for kernel config file
  leaking_addresses: add range check for vsyscall memory
  leaking_addresses: indent dependant options
  leaking_addresses: remove command examples
  leaking_addresses: remove mention of kptr_restrict
  leaking_addresses: fix typo function not called

Merge tag 'linux-kselftest-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest update from Shuah Khan:
 "This Kselftest update for 4.17-rc1 consists of:

   - Test build error fixes

   - Fixes to prevent intel_pstate from building on non-x86 systems.

   - New test for ion with vgem driver.

   - Change to print the test name to /dev/kmsg to add context to kernel
     failures if any uncovered from running the test.

   - Kselftest framework enhancements to add KSFT_TAP_LEVEL environment
     variable to prevent nested TAP headers being printed in the
     Kselftest output.

     Nested TAP13 headers could cause problems for some parsers. This
     change suppresses the nested headers from test programs and test
     shell scripts with changes to framework and Makefiles without
     changing the tests"

* tag 'linux-kselftest-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  selftests/intel_pstate: Fix build rule for x86
  selftests: Print the test we're running to /dev/kmsg
  selftests/seccomp: Allow get_metadata to XFAIL
  selftests/android/ion: Makefile: fix build error
  selftests: futex Makefile add top level TAP header echo to RUN_TESTS
  selftests: Makefile set KSFT_TAP_LEVEL to prevent nested TAP headers
  selftests: lib.mk set KSFT_TAP_LEVEL to prevent nested TAP headers
  selftests: kselftest framework: add handling for TAP header level
  selftests: ion: Add simple test with the vgem driver
  selftests: ion: Remove some prints

Pull general security layer updates from James Morris:

 - Convert security hooks from list to hlist, a nice cleanup, saving
   about 50% of space, from Sargun Dhillon.

 - Only pass the cred, not the secid, to kill_pid_info_as_cred and
   security_task_kill (as the secid can be determined from the cred),
   from Stephen Smalley.

 - Close a potential race in kernel_read_file(), by making the file
   unwritable before calling the LSM check (vs after), from Kees Cook.

* 'next-general' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security:
  security: convert security hooks to use hlist
  exec: Set file unwritable before LSM check
  usb, signal, security: only pass the cred, not the secid, to kill_pid_info_as_cred and security_task_kill

Merge tag 'fscache-next-20180406' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs

Pull fscache updates from David Howells:
 "Three patches that fix some of AFS's usage of fscache:

   (1) Need to invalidate the cache if a foreign data change is detected
       on the server.

   (2) Move the vnode ID uniquifier (equivalent to i_generation) from
       the auxiliary data to the index key to prevent a race between
       file delete and a subsequent file create seeing the same index
       key.

   (3) Need to retire cookies that correspond to files that we think got
       deleted on the server.

  Four patches to fix some things in fscache and cachefiles:

   (4) Fix a couple of checker warnings.

   (5) Correctly indicate to the end-of-operation callback whether an
       operation completed or was cancelled.

   (6) Add a check for multiple cookie relinquishment.

   (7) Fix a path through the asynchronous write that doesn't wake up a
       waiter for a page if the cache decides not to write that page,
       but discards it instead.

  A couple of patches to add tracepoints to fscache and cachefiles:

   (8) Add tracepoints for cookie operators, object state machine
       execution, cachefiles object management and cachefiles VFS
       operations.

   (9) Add tracepoints for fscache operation management and page
       wrangling.

  And then three development patches:

  (10) Attach the index key and auxiliary data to the cookie, pass this
       information through various fscache-netfs API functions and get
       rid of the callbacks to the netfs to get it.

       This means that the cache can get at this information, even if
       the netfs goes away. It also means that the cache can be lazy in
       updating the coherency data.

  (11) Pass the object data size through various fscache-netfs API
       rather than calling back to the netfs for it, and store the value
       in the object.

       This makes it easier to correctly resize the object, as the size
       is updated on writes to the cache, rather than calling back out
       to the netfs.

  (12) Maintain a catalogue of allocated cookies. This makes it possible
       to catch cookie collision up front rather than down in the bowels
       of the cache being run from a service thread from the object
       state machine.

       This will also make it possible in the future to reconnect to a
       cookie that's not gone dead yet because it's waiting for
       finalisation of the storage and also make it possible to bring
       cookies online if the cache is added after the cookie has been
       obtained"

* tag 'fscache-next-20180406' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
  fscache: Maintain a catalogue of allocated cookies
  fscache: Pass object size in rather than calling back for it
  fscache: Attach the index key and aux data to the cookie
  fscache: Add more tracepoints
  fscache: Add tracepoints
  fscache: Fix hanging wait on page discarded by writeback
  fscache: Detect multiple relinquishment of a cookie
  fscache: Pass the correct cancelled indications to fscache_op_complete()
  fscache, cachefiles: Fix checker warnings
  afs: Be more aggressive in retiring cached vnodes
  afs: Use the vnode ID uniquifier in the cache key not the aux data
  afs: Invalidate cache on server data change

Pull VFIO updates from Alex Williamson:

 - Adopt iommu_unmap_fast() interface to type1 backend
   (Suravee Suthikulpanit)

 - mdev sample driver fixup (Shunyong Yang)

 - More efficient PFN mapping handling in type1 backend
   (Jason Cai)

 - VFIO device ioeventfd interface (Alex Williamson)

 - Tag new vfio-platform sub-maintainer (Alex Williamson)

* tag 'vfio-v4.17-rc1' of git://github.com/awilliam/linux-vfio:
  MAINTAINERS: vfio/platform: Update sub-maintainer
  vfio/pci: Add ioeventfd support
  vfio/pci: Use endian neutral helpers
  vfio/pci: Pull BAR mapping setup from read-write path
  vfio/type1: Improve memory pinning process for raw PFN mapping
  vfio-mdev/samples: change RDI interrupt condition
  vfio/type1: Adopt fast IOTLB flush interface when unmap IOVAs

Pull fw_cfg, vhost updates from Michael Tsirkin:
 "This cleans up the qemu fw cfg device driver.

  On top of this, vmcore is dumped there on crash to help debugging
  with kASLR enabled.

  Also included are some fixes in vhost"

* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  vhost: add vsock compat ioctl
  vhost: fix vhost ioctl signature to build with clang
  fw_cfg: write vmcoreinfo details
  crash: export paddr_vmcoreinfo_note()
  fw_cfg: add DMA register
  fw_cfg: add a public uapi header
  fw_cfg: handle fw_cfg_read_blob() error
  fw_cfg: remove inline from fw_cfg_read_blob()
  fw_cfg: fix sparse warnings around FW_CFG_FILE_DIR read
  fw_cfg: fix sparse warning reading FW_CFG_ID
  fw_cfg: fix sparse warnings with fw_cfg_file
  fw_cfg: fix sparse warnings in fw_cfg_sel_endianness()
  ptr_ring: fix build

Pull PCI updates from Bjorn Helgaas:

 - move pci_uevent_ers() out of pci.h (Michael Ellerman)

 - skip ASPM common clock warning if BIOS already configured it (Sinan
   Kaya)

 - fix ASPM Coverity warning about threshold_ns (Gustavo A. R. Silva)

 - remove last user of pci_get_bus_and_slot() and the function itself
   (Sinan Kaya)

 - add decoding for 16 GT/s link speed (Jay Fang)

 - add interfaces to get max link speed and width (Tal Gilboa)

 - add pcie_bandwidth_capable() to compute max supported link bandwidth
   (Tal Gilboa)

 - add pcie_bandwidth_available() to compute bandwidth available to
   device (Tal Gilboa)

 - add pcie_print_link_status() to log link speed and whether it's
   limited (Tal Gilboa)

 - use PCI core interfaces to report when device performance may be
   limited by its slot instead of doing it in each driver (Tal Gilboa)

 - fix possible cpqphp NULL pointer dereference (Shawn Lin)

 - rescan more of the hierarchy on ACPI hotplug to fix Thunderbolt/xHCI
   hotplug (Mika Westerberg)

 - add support for PCI I/O port space that's neither directly accessible
   via CPU in/out instructions nor directly mapped into CPU physical
   memory space. This is fairly intrusive and includes minor changes to
   interfaces used for I/O space on most platforms (Zhichang Yuan, John
   Garry)

 - add support for HiSilicon Hip06/Hip07 LPC I/O space (Zhichang Yuan,
   John Garry)

 - use PCI_EXP_DEVCTL2_COMP_TIMEOUT in rapidio/tsi721 (Bjorn Helgaas)

 - remove possible NULL pointer dereference in of_pci_bus_find_domain_nr()
   (Shawn Lin)

 - report quirk timings with dev_info (Bjorn Helgaas)

 - report quirks that take longer than 10ms (Bjorn Helgaas)

 - add and use Altera Vendor ID (Johannes Thumshirn)

 - tidy Makefiles and comments (Bjorn Helgaas)

 - don't set up INTx if MSI or MSI-X is enabled to align cris, frv,
   ia64, and mn10300 with x86 (Bjorn Helgaas)

 - move pcieport_if.h to drivers/pci/pcie/ to encapsulate it (Frederick
   Lawler)

 - merge pcieport_if.h into portdrv.h (Bjorn Helgaas)

 - move workaround for BIOS PME issue from portdrv to PCI core (Bjorn
   Helgaas)

 - completely disable portdrv with "pcie_ports=compat" (Bjorn Helgaas)

 - remove portdrv link order dependency (Bjorn Helgaas)

 - remove support for unused VC portdrv service (Bjorn Helgaas)

 - simplify portdrv feature permission checking (Bjorn Helgaas)

 - remove "pcie_hp=nomsi" parameter (use "pci=nomsi" instead) (Bjorn
   Helgaas)

 - remove unnecessary "pcie_ports=auto" parameter (Bjorn Helgaas)

 - use cached AER capability offset (Frederick Lawler)

 - don't enable DPC if BIOS hasn't granted AER control (Mika Westerberg)

 - rename pcie-dpc.c to dpc.c (Bjorn Helgaas)

 - use generic pci_mmap_resource_range() instead of powerpc and xtensa
   arch-specific versions (David Woodhouse)

 - support arbitrary PCI host bridge offsets on sparc (Yinghai Lu)

 - remove System and Video ROM reservations on sparc (Bjorn Helgaas)

 - probe for device reset support during enumeration instead of runtime
   (Bjorn Helgaas)

 - add ACS quirk for Ampere (née APM) root ports (Feng Kan)

 - add function 1 DMA alias quirk for Marvell 88SE9220 (Thomas
   Vincent-Cross)

 - protect device restore with device lock (Sinan Kaya)

 - handle failure of FLR gracefully (Sinan Kaya)

 - handle CRS (config retry status) after device resets (Sinan Kaya)

 - skip various config reads for SR-IOV VFs as an optimization
   (KarimAllah Ahmed)

 - consolidate VPD code in vpd.c (Bjorn Helgaas)

 - add Tegra dependency on PCI_MSI_IRQ_DOMAIN (Arnd Bergmann)

 - add DT support for R-Car r8a7743 (Biju Das)

 - fix a PCI_EJECT vs PCI_BUS_RELATIONS race condition in Hyper-V host
   bridge driver that causes a general protection fault (Dexuan Cui)

 - fix Hyper-V host bridge hang in MSI setup on 1-vCPU VMs with SR-IOV
   (Dexuan Cui)

 - fix Hyper-V host bridge hang when ejecting a VF before setting up MSI
   (Dexuan Cui)

 - make several structures static (Fengguang Wu)

 - increase number of MSI IRQs supported by Synopsys DesignWare bridges
   from 32 to 256 (Gustavo Pimentel)

 - implemented multiplexed IRQ domain API and remove obsolete MSI IRQ
   API from DesignWare drivers (Gustavo Pimentel)

 - add Tegra power management support (Manikanta Maddireddy)

 - add Tegra loadable module support (Manikanta Maddireddy)

 - handle 64-bit BARs correctly in endpoint support (Niklas Cassel)

 - support optional regulator for HiSilicon STB (Shawn Guo)

 - use regulator bulk API for Qualcomm apq8064 (Srinivas Kandagatla)

 - support power supplies for Qualcomm msm8996 (Srinivas Kandagatla)

* tag 'pci-v4.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (123 commits)
  MAINTAINERS: Add John Garry as maintainer for HiSilicon LPC driver
  HISI LPC: Add ACPI support
  ACPI / scan: Do not enumerate Indirect IO host children
  ACPI / scan: Rename acpi_is_serial_bus_slave() for more general use
  HISI LPC: Support the LPC host on Hip06/Hip07 with DT bindings
  of: Add missing I/O range exception for indirect-IO devices
  PCI: Apply the new generic I/O management on PCI IO hosts
  PCI: Add fwnode handler as input param of pci_register_io_range()
  PCI: Remove __weak tag from pci_register_io_range()
  MAINTAINERS: Add missing /drivers/pci/cadence directory entry
  fm10k: Report PCIe link properties with pcie_print_link_status()
  net/mlx5e: Use pcie_bandwidth_available() to compute bandwidth
  net/mlx5: Report PCIe link properties with pcie_print_link_status()
  net/mlx4_core: Report PCIe link properties with pcie_print_link_status()
  PCI: Add pcie_print_link_status() to log link speed and whether it's limited
  PCI: Add pcie_bandwidth_available() to compute bandwidth available to device
  misc: pci_endpoint_test: Handle 64-bit BARs properly
  PCI: designware-ep: Make dw_pcie_ep_reset_bar() handle 64-bit BARs properly
  PCI: endpoint: Make sure that BAR_5 does not have 64-bit flag set when clearing
  PCI: endpoint: Make epc->ops->clear_bar()/pci_epc_clear_bar() take struct *epf_bar
  ...

Pull rdma updates from Jason Gunthorpe:
 "Doug and I are at a conference next week so if another PR is sent I
  expect it to only be bug fixes. Parav noted yesterday that there are
  some fringe case behavior changes in his work that he would like to
  fix, and I see that Intel has a number of rc looking patches for HFI1
  they posted yesterday.

  Parav is again the biggest contributor by patch count with his ongoing
  work to enable container support in the RDMA stack, followed by Leon
  doing syzkaller inspired cleanups, though most of the actual fixing
  went to RC.

  There is one uncomfortable series here fixing the user ABI to actually
  work as intended in 32 bit mode. There are lots of notes in the commit
  messages, but the basic summary is we don't think there is an actual
  32 bit kernel user of drivers/infiniband for several good reasons.

  However we are seeing people want to use a 32 bit user space with 64
  bit kernel, which didn't completely work today. So in fixing it we
  required a 32 bit rxe user to upgrade their userspace. rxe users are
  still already quite rare and we think a 32 bit one is non-existing.

   - Fix RDMA uapi headers to actually compile in userspace and be more
     complete

   - Three shared with netdev pull requests from Mellanox:

      * 7 patches, mostly to net with 1 IB related one at the back).
        This series addresses an IRQ performance issue (patch 1),
        cleanups related to the fix for the IRQ performance problem
        (patches 2-6), and then extends the fragmented completion queue
        support that already exists in the net side of the driver to the
        ib side of the driver (patch 7).

      * Mostly IB, with 5 patches to net that are needed to support the
        remaining 10 patches to the IB subsystem. This series extends
        the current 'representor' framework when the mlx5 driver is in
        switchdev mode from being a netdev only construct to being a
        netdev/IB dev construct. The IB dev is limited to raw Eth queue
        pairs only, but by having an IB dev of this type attached to the
        representor for a switchdev port, it enables DPDK to work on the
        switchdev device.

      * All net related, but needed as infrastructure for the rdma
        driver

   - Updates for the hns, i40iw, bnxt_re, cxgb3, cxgb4, hns drivers

   - SRP performance updates

   - IB uverbs write path cleanup patch series from Leon

   - Add RDMA_CM support to ib_srpt. This is disabled by default. Users
     need to set the port for ib_srpt to listen on in configfs in order
     for it to be enabled
     (/sys/kernel/config/target/srpt/discovery_auth/rdma_cm_port)

   - TSO and Scatter FCS support in mlx4

   - Refactor of modify_qp routine to resolve problems seen while
     working on new code that is forthcoming

   - More refactoring and updates of RDMA CM for containers support from
     Parav

   - mlx5 'fine grained packet pacing', 'ipsec offload' and 'device
     memory' user API features

   - Infrastructure updates for the new IOCTL interface, based on
     increased usage

   - ABI compatibility bug fixes to fully support 32 bit userspace on 64
     bit kernel as was originally intended. See the commit messages for
     extensive details

   - Syzkaller bugs and code cleanups motivated by them"

* tag 'for-linus-unmerged' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (199 commits)
  IB/rxe: Fix for oops in rxe_register_device on ppc64le arch
  IB/mlx5: Device memory mr registration support
  net/mlx5: Mkey creation command adjustments
  IB/mlx5: Device memory support in mlx5_ib
  net/mlx5: Query device memory capabilities
  IB/uverbs: Add device memory registration ioctl support
  IB/uverbs: Add alloc/free dm uverbs ioctl support
  IB/uverbs: Add device memory capabilities reporting
  IB/uverbs: Expose device memory capabilities to user
  RDMA/qedr: Fix wmb usage in qedr
  IB/rxe: Removed GID add/del dummy routines
  RDMA/qedr: Zero stack memory before copying to user space
  IB/mlx5: Add ability to hash by IPSEC_SPI when creating a TIR
  IB/mlx5: Add information for querying IPsec capabilities
  IB/mlx5: Add IPsec support for egress and ingress
  {net,IB}/mlx5: Add ipsec helper
  IB/mlx5: Add modify_flow_action_esp verb
  IB/mlx5: Add implementation for create and destroy action_xfrm
  IB/uverbs: Introduce ESP steering match filter
  IB/uverbs: Add modify ESP flow_action
  ...

Pull mailbox updates from Jassi Brar:

 - New Hi3660 mailbox driver

 - Fix TEGRA Kconfig warning

 - Broadcom: use dma_pool_zalloc instead of dma_pool_alloc+memset

* tag 'mailbox-v4.17' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: Add support for Hi3660 mailbox
  dt-bindings: mailbox: Introduce Hi3660 controller binding
  mailbox: tegra: relax TEGRA_HSP_MBOX Kconfig dependencies
  maillbox: bcm-flexrm-mailbox: Use dma_pool_zalloc()

MAINTAINERS is out of date for leaking_addresses.pl. There is now a tree on
kernel.org for development of this script.  We have a second maintainer now,
thanks Tycho.  Development of this scripts was started on kernel-hardening
mailing list so let's keep it there.

Update maintainer details; Add mailing list, kernel.org hosted tree, and second
maintainer.
Signed-off-by: Tobin C. Harding <me@tobin.cc>

Sometimes files may be created by using output from printk.  As the scan
traverses the directory tree we should parse each path name and check if
it is leaking an address.

Add check for leaking address on each path name.
Suggested-by: Tycho Andersen <tycho@tycho.ws>
Acked-by: Tycho Andersen <tycho@tycho.ws>
Signed-off-by: Tobin C. Harding <me@tobin.cc>

Currently sub routine may_leak_address() is checking regex against Perl
special variable $_ which is _fortunately_ being set correctly in a loop
before this sub routine is called.  We already have declared a variable
to hold this value '$line' we should use it.

Use $line in regex match instead of implicit $_
Signed-off-by: Tobin C. Harding <me@tobin.cc>

We have git now, we don't need a version number.  This was originally
added because leaking_addresses.pl shamelessly (and mindlessly) copied
checkpatch.pl

Remove version number from script.
Signed-off-by: Tobin C. Harding <me@tobin.cc>