- 06 Aug, 2014 39 commits
-
-
Heiko Carstens authored
commit 058504ed upstream. There are a couple of seq_files which use the single_open() interface. This interface requires that the whole output must fit into a single buffer. E.g. for /proc/stat allocation failures have been observed because an order-4 memory allocation failed due to memory fragmentation. In such situations reading /proc/stat is not possible anymore. Therefore change the seq_file code to fallback to vmalloc allocations which will usually result in a couple of order-0 allocations and hence also work if memory is fragmented. For reference a call trace where reading from /proc/stat failed: sadc: page allocation failure: order:4, mode:0x1040d0 CPU: 1 PID: 192063 Comm: sadc Not tainted 3.10.0-123.el7.s390x #1 [...] Call Trace: show_stack+0x6c/0xe8 warn_alloc_failed+0xd6/0x138 __alloc_pages_nodemask+0x9da/0xb68 __get_free_pages+0x2e/0x58 kmalloc_order_trace+0x44/0xc0 stat_open+0x5a/0xd8 proc_reg_open+0x8a/0x140 do_dentry_open+0x1bc/0x2c8 finish_open+0x46/0x60 do_last+0x382/0x10d0 path_openat+0xc8/0x4f8 do_filp_open+0x46/0xa8 do_sys_open+0x114/0x1f0 sysc_tracego+0x14/0x1a Signed-off-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Tested-by:
David Rientjes <rientjes@google.com> Cc: Ian Kent <raven@themaw.net> Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Cc: Thorsten Diehl <thorsten.diehl@de.ibm.com> Cc: Andrea Righi <andrea@betterlinux.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Stefan Bader <stefan.bader@canonical.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Kamal Mostafa <kamal@canonical.com>
-
Al Viro authored
commit 39f1f78d upstream. too many places open-code it Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> [ kamal: picked for 3.13-stable for backport convenience ] Signed-off-by:
-
Heiko Carstens authored
commit f74373a5 upstream. These two patches are supposed to "fix" failed order-4 memory allocations which have been observed when reading /proc/stat. The problem has been observed on s390 as well as on x86. To address the problem change the seq_file memory allocations to fallback to use vmalloc, so that allocations also work if memory is fragmented. This approach seems to be simpler and less intrusive than changing /proc/stat to use an interator. Also it "fixes" other users as well, which use seq_file's single_open() interface. This patch (of 2): Use seq_file's single_open_size() to preallocate a buffer that is large enough to hold the whole output, instead of open coding it. Also calculate the requested size using the number of online cpus instead of possible cpus, since the size of the output only depends on the number of online cpus. Signed-off-by:
-
Michal Nazarewicz authored
commit dc78327c upstream. With a kernel configured with ARM64_64K_PAGES && !TRANSPARENT_HUGEPAGE, the following is triggered at early boot: SMP: Total of 8 processors activated. devtmpfs: initialized Unable to handle kernel NULL pointer dereference at virtual address 00000008 pgd = fffffe0000050000 [00000008] *pgd=00000043fba00003, *pmd=00000043fba00003, *pte=00e0000078010407 Internal error: Oops: 96000006 [#1] SMP Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.15.0-rc864k+ #44 task: fffffe03bc040000 ti: fffffe03bc080000 task.ti: fffffe03bc080000 PC is at __list_add+0x10/0xd4 LR is at free_one_page+0x270/0x638 ... Call trace: __list_add+0x10/0xd4 free_one_page+0x26c/0x638 __free_pages_ok.part.52+0x84/0xbc __free_pages+0x74/0xbc init_cma_reserved_pageblock+0xe8/0x104 cma_init_reserved_areas+0x190/0x1e4 do_one_initcall+0xc4/0x154 kernel_init_freeable+0x204/0x2a8 kernel_init+0xc/0xd4 This happens because init_cma_reserved_pageblock() calls __free_one_page() with pageblock_order as page order but it is bigger than MAX_ORDER. This in turn causes accesses past zone->free_list[]. Fix the problem by changing init_cma_reserved_pageblock() such that it splits pageblock into individual MAX_ORDER pages if pageblock is bigger than a MAX_ORDER page. In cases where !CONFIG_HUGETLB_PAGE_SIZE_VARIABLE, which is all architectures expect for ia64, powerpc and tile at the moment, the âpageblock_order > MAX_ORDERâ condition will be optimised out since both sides of the operator are constants. In cases where pageblock size is variable, the performance degradation should not be significant anyway since init_cma_reserved_pageblock() is called only at boot time at most MAX_CMA_AREAS times which by default is eight. Signed-off-by:
Michal Nazarewicz <mina86@mina86.com> Reported-by:
Mark Salter <msalter@redhat.com> Tested-by:
Christopher Covington <cov@codeaurora.org> Cc: Mel Gorman <mgorman@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Thomas Hellstrom authored
commit 4e578080 upstream. Commit "drm/vmwgfx: correct fb_fix_screeninfo.line_length", while fixing a vmwgfx fbdev bug, also writes the pitch to a supposedly read-only register: SVGA_REG_BYTES_PER_LINE, while it should be (and also in fact is) written to SVGA_REG_PITCHLOCK. This patch is Cc'd stable because of the unknown effects writing to this register might have, particularly on older device versions. v2: Updated log message. Cc: Christopher Friedt <chrisfriedt@gmail.com> Tested-by:
Christopher Friedt <chrisfriedt@gmail.com> Signed-off-by:
Thomas Hellstrom <thellstrom@vmware.com> Reviewed-by:
Jakob Bornecrantz <jakob@vmware.com> Signed-off-by:
-
NeilBrown authored
commit 133d4527 upstream. When we write to a degraded array which has a bitmap, we make sure the relevant bit in the bitmap remains set when the write completes (so a 're-add' can quickly rebuilt a temporarily-missing device). If, immediately after such a write starts, we incorporate a spare, commence recovery, and skip over the region where the write is happening (because the 'needs recovery' flag isn't set yet), then that write will not get to the new device. Once the recovery finishes the new device will be trusted, but will have incorrect data, leading to possible corruption. We cannot set the 'needs recovery' flag when we start the write as we do not know easily if the write will be "degraded" or not. That depends on details of the particular raid level and particular write request. This patch fixes a corruption issue of long standing and so it suitable for any -stable kernel. It applied correctly to 3.0 at least and will minor editing to earlier kernels. Reported-by:
Bill <billstuff2001@sbcglobal.net> Tested-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Alex Deucher authored
commit b397207b upstream. Volatile bit was in the wrong location. This bit is not used at the moment. Signed-off-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Peter Chen authored
commit e4adcff0 upstream. We need to delete un-finished td from current request's td list at ep_dequeue API, otherwise, this non-user td will be remained at td list before this request is freed. So if we do ep_queue-> ep_dequeue->ep_queue sequence, when the complete interrupt for the second ep_queue comes, we search td list for this request, the first td (added by the first ep_queue) will be handled, and its status is still active, so we will consider the this transfer still not be completed, but in fact, it has completed. It causes the peripheral side considers it never receives current data for this transfer. We met this problem when do "Error Recovery Test - Device Configured" test item for USBCV2 MSC test, the host has never received ACK for the IN token for CSW due to peripheral considers it does not get this CBW, the USBCV test log like belows: -------------------------------------------------------------------------- INFO Issuing BOT MSC Reset, reset should always succeed INFO Retrieving status on CBW endpoint INFO CBW endpoint status = 0x0 INFO Retrieving status on CSW endpoint INFO CSW endpoint status = 0x0 INFO Issuing required command (Test Unit Ready) to verify device has recovered INFO Issuing CBW (attempt #1): INFO |----- CBW LUN = 0x0 INFO |----- CBW Flags = 0x0 INFO |----- CBW Data Transfer Length = 0x0 INFO |----- CBW CDB Length = 0x6 INFO |----- CBW CDB-00 = 0x0 INFO |----- CBW CDB-01 = 0x0 INFO |----- CBW CDB-02 = 0x0 INFO |----- CBW CDB-03 = 0x0 INFO |----- CBW CDB-04 = 0x0 INFO |----- CBW CDB-05 = 0x0 INFO Issuing CSW : try 1 INFO CSW Bulk Request timed out! ERROR Failed CSW phase : should have been success or stall FAIL (5.3.4) The CSW status value must be 0x00, 0x01, or 0x02. ERROR BOTCommonMSCRequest failed: error=80004000 Cc: Andrzej Pietrasiewicz <andrzej.p@samsung.com> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 099ed151 upstream. Disabling reading and writing to the trace file should not be able to disable all function tracing callbacks. There's other users today (like kprobes and perf). Reading a trace file should not stop those from happening. Reviewed-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Alex Deucher authored
commit b0880e87 upstream. We were using the vddc mask rather than the vddci mask. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=79071 May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=69723 Noticed by: Dieter Nützel <Dieter@nuetzel-hh.de> Signed-off-by:
-
Alex Deucher authored
commit e0792981 upstream. We were using the vddc mask rather than the vddci mask. Bug: https://bugzilla.kernel.org/show_bug.cgi?id=79071 Possibly also fixes: https://bugzilla.kernel.org/show_bug.cgi?id=68571Noticed-by:
Jonathan Howard <jonathan@unbiased.name> Signed-off-by:
-
Alan Stern authored
commit b14bf2d0 upstream. Some buggy JMicron USB-ATA bridges don't know how to translate the FUA bit in READs or WRITEs. This patch adds an entry in unusual_devs.h and a blacklist flag to tell the sd driver not to use FUA. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Michael Büsch <m@bues.ch> Tested-by:
James Bottomley <James.Bottomley@HansenPartnership.com> CC: Matthew Dharm <mdharm-usb@one-eyed-alien.net> Signed-off-by:
-
Michal Nazarewicz authored
commit f35f7124 upstream. It appears that no one ever run ffs-test on a big-endian machine, since it used cpu-endianess for fs_count and hs_count fields which should be in little-endian format. Fix by wrapping the numbers in cpu_to_le32. Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
J. Bruce Fields authored
commit 76f47128 upstream. An NFS operation that creates a new symlink includes the symlink data, which is xdr-encoded as a length followed by the data plus 0 to 3 bytes of zero-padding as required to reach a 4-byte boundary. The vfs, on the other hand, wants null-terminated data. The simple way to handle this would be by copying the data into a newly allocated buffer with space for the final null. The current nfsd_symlink code tries to be more clever by skipping that step in the (likely) case where the byte following the string is already 0. But that assumes that the byte following the string is ours to look at. In fact, it might be the first byte of a page that we can't read, or of some object that another task might modify. Worse, the NFSv4 code tries to fix the problem by actually writing to that byte. In the NFSv2/v3 cases this actually appears to be safe: - nfs3svc_decode_symlinkargs explicitly null-terminates the data (after first checking its length and copying it to a new page). - NFSv2 limits symlinks to 1k. The buffer holding the rpc request is always at least a page, and the link data (and previous fields) have maximum lengths that prevent the request from reaching the end of a page. In the NFSv4 case the CREATE op is potentially just one part of a long compound so can end up on the end of a page if you're unlucky. The minimal fix here is to copy and null-terminate in the NFSv4 case. The nfsd_symlink() interface here seems too fragile, though. It should really either do the copy itself every time or just require a null-terminated string. Reported-by:
Jeff Layton <jlayton@primarydata.com> Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Signed-off-by:
-
Thomas Gleixner authored
commit c58d80f5 upstream. Some TI chips raise the DMA complete interrupt before the actual transfer has been completed. The code tries to busy wait for a few microseconds and if that fails it arms an hrtimer to recheck. So far so good, but that has the following issue: CPU 0 CPU1 start_next_transfer(RQ1); DMA interrupt if (premature_irq(RQ1)) if (!hrtimer_active(timer)) hrtimer_start(timer); hrtimer expires timer->state = CALLBACK_RUNNING; timer->fn() cppi41_recheck_tx_req() complete_request(RQ1); if (requests_pending()) start_next_transfer(RQ2); DMA interrupt if (premature_irq(RQ2)) if (!hrtimer_active(timer)) hrtimer_start(timer); timer->state = INACTIVE; The premature interrupt of request2 on CPU1 does not arm the timer and therefor the request completion never happens because it checks for !hrtimer_active(). hrtimer_active() evaluates: timer->state != HRTIMER_STATE_INACTIVE which of course evaluates to true in the above case as timer->state is CALLBACK_RUNNING. That's clearly documented: * A timer is active, when it is enqueued into the rbtree or the * callback function is running or it's in the state of being migrated * to another cpu. But that's not what the code wants to check. The code wants to check whether the timer is queued, i.e. whether its armed and waiting for expiry. We have a helper function for this: hrtimer_is_queued(). This evaluates: timer->state & HRTIMER_STATE_QUEUED So in the above case this evaluates to false and therefor forces the DMA interrupt on CPU1 to call hrtimer_start(). Use hrtimer_is_queued() instead of hrtimer_active() and evrything is good. Reported-by:
Torben Hohn <torbenh@linutronix.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Ezequiel Garcia authored
commit 7adb5c87 upstream. At probe time, the musb_am335x driver register its childs by calling of_platform_populate(), which registers all childs in the devicetree hierarchy recursively. On the other side, the driver's remove() function uses of_device_unregister() to remove each child of musb_am335x's. However, when musb_dsps is loaded, its devices are attached to the musb_am335x device as musb_am335x childs. Hence, musb_am335x remove() will attempt to unregister the devices registered by musb_dsps, which produces a kernel panic. In other words, the childs in the "struct device" hierarchy are not the same as the childs in the "devicetree" hierarchy. Ideally, we should enforce the removal of the devices registered by musb_am335x *only*, instead of all its child devices. However, because of the recursive nature of of_platform_populate, this doesn't seem possible. Therefore, as the only solution at hand, this commit disables musb_am335x driver removal capability, preventing it from being ever removed. This was originally suggested by Sebastian Siewior: https://www.mail-archive.com/linux-omap@vger.kernel.org/msg104946.html And for reference, here's the panic upon module removal: musb-hdrc musb-hdrc.0.auto: remove, state 4 usb usb1: USB disconnect, device number 1 musb-hdrc musb-hdrc.0.auto: USB bus 1 deregistered Unable to handle kernel NULL pointer dereference at virtual address 0000008c pgd = de11c000 [0000008c] *pgd=9e174831, *pte=00000000, *ppte=00000000 Internal error: Oops: 17 [#1] ARM Modules linked in: musb_am335x(-) musb_dsps musb_hdrc usbcore usb_common CPU: 0 PID: 623 Comm: modprobe Not tainted 3.15.0-rc4-00001-g24efd13 #69 task: de1b7500 ti: de122000 task.ti: de122000 PC is at am335x_shutdown+0x10/0x28 LR is at am335x_shutdown+0xc/0x28 pc : [<c0327798>] lr : [<c0327794>] psr: a0000013 sp : de123df8 ip : 00000004 fp : 00028f00 r10: 00000000 r9 : de122000 r8 : c000e6c4 r7 : de0e3c10 r6 : de0e3800 r5 : de624010 r4 : de1ec750 r3 : de0e3810 r2 : 00000000 r1 : 00000001 r0 : 00000000 Flags: NzCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user Control: 10c5387d Table: 9e11c019 DAC: 00000015 Process modprobe (pid: 623, stack limit = 0xde122240) Stack: (0xde123df8 to 0xde124000) 3de0: de0e3810 bf054488 3e00: bf05444c de624010 60000013 bf043650 000012fc de624010 de0e3810 bf043a20 3e20: de0e3810 bf04b240 c0635b88 c02ca37c c02ca364 c02c8db0 de1b7500 de0e3844 3e40: de0e3810 c02c8e28 c0635b88 de02824c de0e3810 c02c884c de0e3800 de0e3810 3e60: de0e3818 c02c5b20 bf05417c de0e3800 de0e3800 c0635b88 de0f2410 c02ca838 3e80: bf05417c de0e3800 bf055438 c02ca8cc de0e3c10 bf054194 de0e3c10 c02ca37c 3ea0: c02ca364 c02c8db0 de1b7500 de0e3c44 de0e3c10 c02c8e28 c0635b88 de02824c 3ec0: de0e3c10 c02c884c de0e3c10 de0e3c10 de0e3c18 c02c5b20 de0e3c10 de0e3c10 3ee0: 00000000 bf059000 a0000013 c02c5bc0 00000000 bf05900c de0e3c10 c02c5c48 3f00: de0dd0c0 de1ec970 de0f2410 bf05929c de0f2444 bf05902c de0f2410 c02ca37c 3f20: c02ca364 c02c8db0 bf05929c de0f2410 bf05929c c02c94c8 bf05929c 00000000 3f40: 00000800 c02c8ab4 bf0592e0 c007fc40 c00dd820 6273756d 336d615f 00783533 3f60: c064a0ac de1b7500 de122000 de1b7500 c000e590 00000001 c000e6c4 c0060160 3f80: 00028e70 00028e70 00028ea4 00000081 60000010 00028e70 00028e70 00028ea4 3fa0: 00000081 c000e500 00028e70 00028e70 00028ea4 00000800 becb59f8 00027608 3fc0: 00028e70 00028e70 00028ea4 00000081 00000001 00000001 00000000 00028f00 3fe0: b6e6b6f0 becb59d4 000160e8 b6e6b6fc 60000010 00028ea4 00000000 00000000 [<c0327798>] (am335x_shutdown) from [<bf054488>] (dsps_musb_exit+0x3c/0x4c [musb_dsps]) [<bf054488>] (dsps_musb_exit [musb_dsps]) from [<bf043650>] (musb_shutdown+0x80/0x90 [musb_hdrc]) [<bf043650>] (musb_shutdown [musb_hdrc]) from [<bf043a20>] (musb_remove+0x24/0x68 [musb_hdrc]) [<bf043a20>] (musb_remove [musb_hdrc]) from [<c02ca37c>] (platform_drv_remove+0x18/0x1c) [<c02ca37c>] (platform_drv_remove) from [<c02c8db0>] (__device_release_driver+0x70/0xc8) [<c02c8db0>] (__device_release_driver) from [<c02c8e28>] (device_release_driver+0x20/0x2c) [<c02c8e28>] (device_release_driver) from [<c02c884c>] (bus_remove_device+0xdc/0x10c) [<c02c884c>] (bus_remove_device) from [<c02c5b20>] (device_del+0x104/0x198) [<c02c5b20>] (device_del) from [<c02ca838>] (platform_device_del+0x14/0x9c) [<c02ca838>] (platform_device_del) from [<c02ca8cc>] (platform_device_unregister+0xc/0x20) [<c02ca8cc>] (platform_device_unregister) from [<bf054194>] (dsps_remove+0x18/0x38 [musb_dsps]) [<bf054194>] (dsps_remove [musb_dsps]) from [<c02ca37c>] (platform_drv_remove+0x18/0x1c) [<c02ca37c>] (platform_drv_remove) from [<c02c8db0>] (__device_release_driver+0x70/0xc8) [<c02c8db0>] (__device_release_driver) from [<c02c8e28>] (device_release_driver+0x20/0x2c) [<c02c8e28>] (device_release_driver) from [<c02c884c>] (bus_remove_device+0xdc/0x10c) [<c02c884c>] (bus_remove_device) from [<c02c5b20>] (device_del+0x104/0x198) [<c02c5b20>] (device_del) from [<c02c5bc0>] (device_unregister+0xc/0x20) [<c02c5bc0>] (device_unregister) from [<bf05900c>] (of_remove_populated_child+0xc/0x14 [musb_am335x]) [<bf05900c>] (of_remove_populated_child [musb_am335x]) from [<c02c5c48>] (device_for_each_child+0x44/0x70) [<c02c5c48>] (device_for_each_child) from [<bf05902c>] (am335x_child_remove+0x18/0x30 [musb_am335x]) [<bf05902c>] (am335x_child_remove [musb_am335x]) from [<c02ca37c>] (platform_drv_remove+0x18/0x1c) [<c02ca37c>] (platform_drv_remove) from [<c02c8db0>] (__device_release_driver+0x70/0xc8) [<c02c8db0>] (__device_release_driver) from [<c02c94c8>] (driver_detach+0xb4/0xb8) [<c02c94c8>] (driver_detach) from [<c02c8ab4>] (bus_remove_driver+0x4c/0xa0) [<c02c8ab4>] (bus_remove_driver) from [<c007fc40>] (SyS_delete_module+0x128/0x1cc) [<c007fc40>] (SyS_delete_module) from [<c000e500>] (ret_fast_syscall+0x0/0x48) Fixes: 97238b35 ("usb: musb: dsps: use proper child nodes") Acked-by:
George Cherian <george.cherian@ti.com> Signed-off-by:
Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by:
-
Jan Kara authored
commit a93cd4cf upstream. Hole punching code for files with indirect blocks wrongly computed number of blocks which need to be cleared when traversing the indirect block tree. That could result in punching more blocks than actually requested and thus effectively cause a data loss. For example: fallocate -n -p 10240000 4096 will punch the range 10240000 - 12632064 instead of the range 1024000 - 10244096. Fix the calculation. Fixes: 8bad6fc8Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Deng-Cheng Zhu authored
commit 8c9eb041 upstream. kvm_arch_vcpu_free() is called in 2 code paths: 1) kvm_vm_ioctl() kvm_vm_ioctl_create_vcpu() kvm_arch_vcpu_destroy() kvm_arch_vcpu_free() 2) kvm_put_kvm() kvm_destroy_vm() kvm_arch_destroy_vm() kvm_mips_free_vcpus() kvm_arch_vcpu_free() Neither of the paths handles VCPU free. We need to do it in kvm_arch_vcpu_free() corresponding to the memory allocation in kvm_arch_vcpu_create(). Signed-off-by:
Deng-Cheng Zhu <dengcheng.zhu@imgtec.com> Reviewed-by:
James Hogan <james.hogan@imgtec.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Paolo Bonzini authored
commit 8faeb529 upstream. Even though the virtio-scsi spec guarantees that all requests related to the TMF will have been completed by the time the TMF itself completes, the request queue's callback might not have run yet. This causes requests to be completed more than once, and as a result triggers a variety of BUGs or oopses. Signed-off-by:
Venkatesh Srinivas <venkateshs@google.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Paolo Bonzini authored
commit cdda0e5a upstream. Calling the workqueue interface on uninitialized work items isn't a good idea even if they're zeroed. It's not failing catastrophically only through happy accidents. Signed-off-by:
Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by:
-
Brian King authored
commit 7114aae0 upstream. Add a memory barrier prior to sending a new command to the VIOS to ensure the VIOS does not receive stale data in the command buffer. Also add a memory barrier when processing the CRQ for completed commands. Signed-off-by:
Brian King <brking@linux.vnet.ibm.com> Acked-by:
Nathan Fontenot <nfont@linux.vnet.ibm.com> Signed-off-by:
-
Brian King authored
commit 9ee75597 upstream. If a CRQ reset is triggered for some reason while in the middle of performing VSCSI adapter initialization, we don't want to call the done function for the initialization MAD commands as this will only result in two threads attempting initialization at the same time, resulting in failures. Signed-off-by:
-
Wang, Yu authored
commit d6236f6d upstream. The system suspend flow as following: 1, Freeze all user processes and kenrel threads. 2, Try to suspend all devices. 2.1, If pci device is in RPM suspended state, then pci driver will try to resume it to RPM active state in the prepare stage. 2.2, xhci_resume function calls usb_hcd_resume_root_hub to queue two workqueue items to resume usb2&usb3 roothub devices. 2.3, Call suspend callbacks of devices. 2.3.1, All suspend callbacks of all hcd's children, including roothub devices are called. 2.3.2, Finally, hcd_pci_suspend callback is called. Due to workqueue threads were already frozen in step 1, the workqueue items can't be scheduled, and the roothub devices can't be resumed in this flow. The HCD_FLAG_WAKEUP_PENDING flag which is set in usb_hcd_resume_root_hub won't be cleared. Finally, hcd_pci_suspend will return -EBUSY, and system suspend fails. The reason why this issue doesn't show up very often is due to that choose_wakeup will be called in step 2.3.1. In step 2.3.1, if udev->do_remote_wakeup is not equal to device_may_wakeup(&udev->dev), then udev will resume to RPM active for changing the wakeup settings. This has been a lucky hit which hides this issue. For some special xHCI controllers which have no USB2 port, then roothub will not match hub driver due to probe failed. Then its do_remote_wakeup will be set to zero, and we won't be as lucky. xhci driver doesn't need to resume roothub devices everytime like in the above case. It's only needed when there are pending event TRBs. This patch should be back-ported to kernels as old as 3.2, that contains the commit f69e3120 "USB: XHCI: resume root hubs when the controller resumes" Signed-off-by:
Wang, Yu <yu.y.wang@intel.com> Acked-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Lu Baolu authored
commit ff8cbf25 upstream. When xHCI PCI host is suspended, if do_wakeup is false in xhci_pci_suspend, xhci_bus_suspend needs to clear all root port wake on bits. Otherwise some Intel platforms may get a spurious wakeup, even if PCI PME# is disabled. This patch should be back-ported to kernels as old as 2.6.37, that contains the commit 9777e3ce "USB: xHCI: bus power management implementation". Signed-off-by:
Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit 3213b151 upstream. The transfer burst count (TBC) field in xhci 1.0 hosts should be set to the number of bursts needed to transfer all packets in a isoc TD. Supported values are 0-2 (1 to 3 bursts per service interval). Formula for TBC calculation is given in xhci spec section 4.11.2.3: TBC = roundup( Transfer Descriptor Packet Count / Max Burst Size +1 ) - 1 This patch should be applied to stable kernels since 3.0 that contain the commit 5cd43e33 "xhci 1.0: Set transfer burst count field." Suggested-by:
ShiChun Ma <masc2008@qq.com> Signed-off-by:
-
Mathias Nyman authored
commit 6fcfb0d6 upstream. Command completion events normally include command completion status, SLOT_ID, and a pointer to the original command. Reset device command completion SLOT_ID may be zero according to xhci specs 4.6.11. VIA controllers set the SLOT_ID to zero, triggering a WARN_ON in the command completion handler. Use the SLOT ID found from the original command instead. This patch should be applied to stable kernels since 3.13 that contain the commit 20e7acb1 "xhci: use completion event's slot id rather than dig it out of command" Reported-by:
Saran Neti <sarannmr@gmail.com> Tested-by:
-
Ulrich Obergfell authored
commit 8922a908 upstream. After scsi_try_to_abort_cmd returns, the eh_abort_handler may have already found that the command has completed in the device, causing the host_byte to be nonzero (e.g. it could be DID_ABORT). When this happens, ORing DID_TIME_OUT into the host byte will corrupt the result field and initiate an unwanted command retry. Fix this by using set_host_byte instead, following the model of commit 2082ebc4. Signed-off-by:
Ulrich Obergfell <uobergfe@redhat.com> [Fix all instances according to review comments. - Paolo] Signed-off-by:
Ewan D. Milne <emilne@redhat.com> Reviewed-by:
Hannes Reinecke <hare@suse.de> [ kamal: backport to 3.13-stable (only one instance of this) ] Signed-off-by:
-
Bjørn Mork authored
commit b0ebef36 upstream. Adding a couple of Olivetti modems and blacklisting the net function on a couple which are already supported. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit aea1ae87 upstream. Fix NULL-pointer dereference when probing an interface with no endpoints. These devices have two bulk endpoints per interface, but this avoids crashing the kernel if a user forces a non-FTDI device to be probed. Note that the iterator variable was made unsigned in order to avoid a maybe-uninitialized compiler warning for ep_desc after the loop. Fixes: 895f28ba ("USB: ftdi_sio: fix hi-speed device packet size calculation") Reported-by:
Mike Remski <mremski@mutualink.net> Tested-by:
-
Oliver Neukum authored
commit 1cab4c68 upstream. Reported by Alif Mubarak Ahmad: This device vendor and product id is 1c9e:9800 It is working as serial interface with generic usbserial driver. I thought it is more suitable to use usbserial option driver, which has better capability distinguishing between modem serial interface and micro sd storage interface. [ johan: style changes ] Signed-off-by:
Oliver Neukum <oneukum@suse.de> Tested-by:
Alif Mubarak Ahmad <alive4ever@live.com> Signed-off-by:
-
Thomas Gleixner authored
commit 4f436603 upstream. The ras3 block on spear320 claims to have 3 interrupts. In fact it has one and 6 reserved interrupts. Account the 6 reserved to this block so it has 7 interrupts total. That matches the datasheet and the device tree entries. Broken since commit 80515a5a(ARM: SPEAr3xx: shirq: simplify and move the shared irq multiplexor to DT). Testing is overrated.... Signed-off-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Jason Cooper <jason@lakedaemon.net> Signed-off-by:
-
Adam Thomson authored
commit a2c12493 upstream. Currently in the inkern.c code for IIO framework, the function of_iio_channel_get_by_name() will return a non-NULL pointer when it cannot find a channel using of_iio_channel_get() and when it tries to search for 'io-channel-ranges' property and fails. This is incorrect behaviour as the function which calls this expects a NULL pointer for failure. This patch rectifies the issue. Signed-off-by:
Adam Thomson <Adam.Thomson.Opensource@diasemi.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Dan Carpenter authored
commit b70e19c2 upstream. We should be returning a negative error code instead of success here. This would have been detected by GCC, except that the "ret" variable was initialized with a bogus value to disable GCC's uninitialized variable warnings. I've cleaned that up, as well. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Michal Nazarewicz authored
commit f0688c8b upstream. If the descriptors do not need any strings and user space sends empty set of strings, the ffs->stringtabs field remains NULL. Thus *ffs->stringtabs in functionfs_bind leads to a NULL pointer dereferenece. The bug was introduced by commit [fd7c9a00: “use usb_string_ids_n()”]. While at it, remove double initialisation of lang local variable in that function. ffs->strings_count does not need to be checked in any way since in the above scenario it will remain zero and usb_string_ids_n() is a no-operation when colled with 0 argument. Signed-off-by:
-
Linus Walleij authored
commit 82363cf2 upstream. There is a regression in the upcoming v3.16-rc1, that is caused by a problem that has been around for a while but now finally hangs the system. The bootcrawl looks like this: pinctrl-nomadik soc:pinctrl: pin GPIO256_AF28 already requested by a03e0000.usb_per5; cannot claim for musb-hdrc.0.auto pinctrl-nomadik soc:pinctrl: pin-256 (musb-hdrc.0.auto) status -22 pinctrl-nomadik soc:pinctrl: could not request pin 256 (GPIO256_AF28) from group usb_a_1 on device pinctrl-nomadik musb-hdrc musb-hdrc.0.auto: Error applying setting, reverse things back HS USB OTG: no transceiver configured musb-hdrc musb-hdrc.0.auto: musb_init_controller failed with status -517 platform musb-hdrc.0.auto: Driver musb-hdrc requests probe deferral (...) The ux500 MUSB driver propagates the OF node to the dynamically created musb-hdrc device, which is incorrect as it makes the OF core believe there are two devices spun from the very same DT node, which confuses other parts of the device core, notably the pin control subsystem, which will try to apply all the pin control settings also to the HDRC device as it gets instantiated. (The OMAP2430 for example, does not set the of_node member.) Cc: Arnd Bergmann <arnd@arndb.de> Acked-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Paolo Bonzini authored
commit 7cb060a9 upstream. KVM does not really do much with the PAT, so this went unnoticed for a long time. It is exposed however if you try to do rdmsr on the PAT register. Reported-by:
Valentine Sinitsyn <valentine.sinitsyn@gmail.com> Signed-off-by:
-
Nadav Amit authored
commit 682367c4 upstream. Recent Intel CPUs have 10 variable range MTRRs. Since operating systems sometime make assumptions on CPUs while they ignore capability MSRs, it is better for KVM to be consistent with recent CPUs. Reporting more MTRRs than actually supported has no functional implications. Signed-off-by:
Nadav Amit <namit@cs.technion.ac.il> Signed-off-by:
-
David R. Piegdon authored
commit c021f241 upstream. Fix a parser-bug in the omap2 muxing code where muxtable-entries will be wrongly selected if the requested muxname is a *prefix* of their m0-entry and they have a matching mN-entry. Fix by additionally checking that the length of the m0_entry is equal. For example muxing of "dss_data2.dss_data2" on omap32xx will fail because the prefix "dss_data2" will match the mux-entries "dss_data2" as well as "dss_data20", with the suffix "dss_data2" matching m0 (for dss_data2) and m4 (for dss_data20). Thus both are recognized as signal path candidates: Relevant muxentries from mux34xx.c: _OMAP3_MUXENTRY(DSS_DATA20, 90, "dss_data20", NULL, "mcspi3_somi", "dss_data2", "gpio_90", NULL, NULL, "safe_mode"), _OMAP3_MUXENTRY(DSS_DATA2, 72, "dss_data2", NULL, NULL, NULL, "gpio_72", NULL, NULL, "safe_mode"), This will result in a failure to mux the pin at all: _omap_mux_get_by_name: Multiple signal paths (2) for dss_data2.dss_data2 Patch should apply to linus' latest master down to rather old linux-2.6 trees. Signed-off-by:
David R. Piegdon <lkml@p23q.org> [tony@atomide.com: updated description to include full description] Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Jan Kara authored
commit c5c7b8dd upstream. Error recovery in ext4_alloc_branch() calls ext4_forget() even for buffer corresponding to indirect block it did not allocate. This leads to brelse() being called twice for that buffer (once from ext4_forget() and once from cleanup in ext4_ind_map_blocks()) leading to buffer use count misaccounting. Eventually (but often much later because there are other users of the buffer) we will see messages like: VFS: brelse: Trying to free free buffer Another manifestation of this problem is an error: JBD2 unexpected failure: jbd2_journal_revoke: !buffer_revoked(bh); inconsistent data on disk The fix is easy - don't forget buffer we did not allocate. Also add an explanatory comment because the indexing at ext4_alloc_branch() is somewhat subtle. Signed-off-by:
-
- 04 Aug, 2014 1 commit
-
-
David Vrabel authored
commit b7dd0e35 upstream. arch_gnttab_map_frames() and arch_gnttab_unmap_frames() are called in atomic context but were calling alloc_vm_area() which might sleep. Also, if a driver attempts to allocate a grant ref from an interrupt and the table needs expanding, then the CPU may already by in lazy MMU mode and apply_to_page_range() will BUG when it tries to re-enable lazy MMU mode. These two functions are only used in PV guests. Introduce arch_gnttab_init() to allocates the virtual address space in advance. Avoid the use of apply_to_page_range() by using saving and using the array of PTE addresses from the alloc_vm_area() call (which ensures that the required page tables are pre-allocated). Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Signed-off-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [ David Vrabel: Backported to 3.13.10. ] Signed-off-by:
-
