Get HDaudio link position for current stream delay calculation
from hda registers.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-9-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

PCM delay depends on stream position based on hardware
counter to calculate stream delay so add this ops to get
stream position according to hardware counter.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-8-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Sof framework will call specific delay function for
different IPC version.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-7-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Use the hw_params to init time info for ipc4 delay calculation.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-6-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Allocate time info when pcm is loaded by topology
and free it when pcm is unloaded by topology.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-5-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Start_stream_offset is used to strip invalid sample count in dai
for some cases like dai is started before host. llp_offset is used
to get current dai position from memory windows.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-4-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

FW can share some information with host driver, .e.g fw status, pipeline
status and volume status. On ipc4 platform it is located in memory
windows 0 with size of struct sof_ipc4_fw_reg.

With this patch, ipc4 driver can find fw information in fw_info_box
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-3-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Ipc4_fw_reg defines the content of memory window 0 shared by fw.
Host driver can get fw information by data structure defined in
this file.
Signed-off-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230202132954.26773-2-peter.ujfalusi@linux.intel.comSigned-off-by: Mark Brown <broonie@kernel.org>

Clang warns:

  ../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
                  mr |= SPDIFRX_MR_ENDIAN_BIG;
                  ^~
  ../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
          u32 mr;
                ^
                 = 0
  1 error generated.

Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.

Fixes: fa09fa60 ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Link: https://github.com/ClangBuiltLinux/linux/issues/1797Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230202-mchp-spdifrx-fix-uninit-mr-v1-1-629a045d7a2f@kernel.orgSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Mario Limonciello <mario.limonciello@amd.com>:

It's been reported that a number of laptops have a low volume
level from the digital microphone compared to Windows.

AMD offers a register that can adjust the gain for PDM which is not
configured at maximum gain by default.

To fix this change the default for all 3 drivers to raise the gain
but also offer a module parameter. The module parameter can be used
for debugging if the gain is too high on a given laptop.

This is intentionally split into multiple patches for default and
parameter so that if the default really does behave better universally
we can bring it back to stable too later.

There are spelling mistakes in dev_err messages. Fix them.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20230202103236.270057-1-colin.i.king@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

In case of regressions for any users that the new pdm_gain value is
too high and for additional debugging, introduce a module parameter
that would let them configure it.

This parameter should be removed in the future:
 * If it's determined that the parameter is not needed, just hardcode
   the correct value as before
 * If users do end up using it to debug and report different values
   we should introduce a config knob that can have policy set by ucm.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230131184653.10216-7-mario.limonciello@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

No issues have been reported yet for DMIC audio level on ps platforms,
but as problems were found both on YC (Rembrandt) and Renoir based
designs it's very likely they happen on ps too.

Increase the PDM gain to solve this problem.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230131184653.10216-6-mario.limonciello@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

In case of regressions for any users that the new pdm_gain value is
too high and for additional debugging, introduce a module parameter
that would let them configure it.

This parameter should be removed in the future:
 * If it's determined that the parameter is not needed, just hardcode
   the correct value as before
 * If users do end up using it to debug and report different values
   we should introduce a config knob that can have policy set by ucm.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230131184653.10216-5-mario.limonciello@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

A similar issue that was reported on Rembrandt based laptops with
low DMIC volume is also being reported for Barcelo based laptops
that use renoir acp3x.

Increase the PDM gain to overcome this problem.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230131184653.10216-4-mario.limonciello@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

In case of regressions for any users that the new pdm_gain value is
too high and for additional debugging, introduce a module parameter
that would let them configure it.

This parameter should be removed in the future:
 * If it's determined that the parameter is not needed, just hardcode
   the correct value as before
 * If users do end up using it to debug and report different values
   we should introduce a config knob that can have policy set by ucm.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230131184653.10216-3-mario.limonciello@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

A number of users for Lenovo Rembrandt based laptops are
reporting that the microphone is too quiet relative to
Windows with a dual boot.

Increase the PDM gain to overcome this problem.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20230131184653.10216-2-mario.limonciello@amd.comSigned-off-by: Mark Brown <broonie@kernel.org>

Both the DAC and ADC have digital gain controls available
for their mixers, which go from -31 to 0db by step of 1db.
Signed-off-by: Christophe Branchereau <cbranchereau@gmail.com>
Link: https://lore.kernel.org/r/20230122210703.2552384-1-cbranchereau@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch is tested on V4H White Hawk + ARD-AUDIO-DA7212
Signed-off-by: Linh Phung <linh.phung.jy@renesas.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87o7qe5ej5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Document R-Car V4H (R8A779G0), and R-Car Gen4 SoC bindings.

Link: https://lore.kernel.org/r/87zga6t5r4.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87pmau5ejk.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch tidyups rsnd_dma_probe(), but there is no effect.

This is prepare for Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87r0va5elq.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch tidyups rsnd_dma_addr(), but there is no effect.

This is prepare for Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sffq5elx.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

ADG need to know output rate of 44.1kHz/48kHz.
It is using single variable for each, but this patch changes
it to array. Nothing is changed by this patch.

This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87tu065em3.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current adg.c is assuming number of clkin/clkout are fixed, but it is
not correct on Gen4. This patch uses clkin/out_size to handling it.

This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87v8km5em7.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch moves clkout_name to top of the file to handling both
clkin/clkout in the same place.

This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87wn525emc.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current adg.c is usig "clk" as clock IN, but is using "clkout" for
clock OUT. This patch arranges "clk" to "clkin".

This is prepare for R-Car Gen4 support.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87y1pi5emh.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

The flag LRCLK_ASYNC / AUDIO_OUT_48 had been added to handling
special case of Salvator-X board, but it is not used on upstream.
It makes code complex today, let's remove these.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zg9y5emm.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

This patch follows clkin debug message style on clkout.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871qna6t77.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Some SoC can't handle all requested hw rule. In such case, it will indicate
like below, but it is unclear why it didn't work to user.
This patch indicates warning in such case once, because player will try to
similar rule many times.

	# aplay sound.wav
	Playing WAVE 'sound.wav' : Signed 16 bit Little Endian, Rate 48000 Hz, Stereo
	aplay: aplay.c: 1359: set_params: Assertion `err >= 0' failed.
	Aborted by signal Aborted...
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87357q6t7b.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

rsnd_ssi_master_clk_start() indicates error message if it couldn't
handle requested clock/rate, but it is not caring all cases.
This patch cares it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874js66t7g.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit b43b8ae8 ("ASoC: rsnd: protect mod->status") removed
RSND_DEBUG_NO_DAI_CALL and rsnd_dbg_dai_call(), but these are still
exist on rsnd.h. This patch removes it.

Fixes: b43b8ae8 ("ASoC: rsnd: protect mod->status")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875ycm6t7l.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

commit 1f9c82b5 ("ASoC: rsnd: add debugfs support") added
CONFIG_DEBUG_FS related definitions on rsnd.h, but it should be
added inside of RSND_H. This patch fixup it.

Fixes: 1f9c82b5 ("ASoC: rsnd: add debugfs support")
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877cx26t7r.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current rsnd sets "channels_min" which is used from
snd_soc_dai_stream_valid() without checking DT playback/capture property.
Thus, "aplay -l" or "arecord -l" will indicate un-exising device.
This patch checks DT proerty and do nothing playback/capture settings if
not exist.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/878rhi6t7x.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Set driver name to allow matching different UCM2 configurations
for the multiple devices sharing the same APQ8096 ASoC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/20220622061106.35071-1-y.oudjana@protonmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Current ASoC has many helper function.

Link: https://lore.kernel.org/r/20230201111415.67bd4b7e@canb.auug.org.auReported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87bkme6vp5.wl-kuninori.morimoto.gx@renesas.comSigned-off-by: Mark Brown <broonie@kernel.org>

Merge series from Stefan Binding <sbinding@opensource.cirrus.com>:

The CS42L42 has a SoundWire interface for control and audio. This
chain of patches adds support for this.

Patches #1 .. #5 split out various changes to the existing code that
are needed for adding Soundwire. These are mostly around clocking and
supporting the separate probe and enumeration stages in SoundWire.

Patches #6 .. #8 actually adds the SoundWire handling.

Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:

struct snd_soc_dai need to have info for playback/capture,
but it is using "playback/capture_xxx" or "tx/tx_xxx" or array.
This kind of random definition is very difficult to read.

This patch-set add helper functions and each driver use it.
And cleanup the definition.

Merge series from Claudiu Beznea <claudiu.beznea@microchip.com>:

This series adds runtime PM support for Microchip SPDIFRX driver.
Along with it I added few fixes identified while going though the code
and playing with Microchip SPDIFRX controller.

Merge series from wangweidong.a@awinic.com:

The Awinic AW88395 is an I2S/TDM input, high efficiency
digital Smart K audio amplifier with an integrated 10.25V
smart boost converter.

Add a DT schema for describing Awinic AW88395 audio amplifiers. They are
controlled using I2C

Merge series from Herve Codina <herve.codina@bootlin.com>:

The Renesas IDT821034 codec is four channel PCM codec with on-chip
filters and programmable gain setting.  It also provides SLIC
(Subscriber Line Interface Circuit) signals as GPIOs.