- 22 Jun, 2020 40 commits
-
-
Jann Horn authored
[ Upstream commit 586b58ca ] With CONFIG_DEBUG_ATOMIC_SLEEP=y and CONFIG_CGROUPS=y, kernel oopses in non-preemptible context look untidy; after the main oops, the kernel prints a "sleeping function called from invalid context" report because exit_signals() -> cgroup_threadgroup_change_begin() -> percpu_down_read() can sleep, and that happens before the preempt_count_set(PREEMPT_ENABLED) fixup. It looks like the same thing applies to profile_task_exit() and kcov_task_exit(). Fix it by moving the preemption fixup up and the calls to profile_task_exit() and kcov_task_exit() down. Fixes: 1dc0fffc ("sched/core: Robustify preemption leak checks") Signed-off-by:
Jann Horn <jannh@google.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/20200305220657.46800-1-jannh@google.comSigned-off-by:
Sasha Levin <sashal@kernel.org>
-
Nathan Chancellor authored
[ Upstream commit 18f1ca46 ] When building 64r6_defconfig with CONFIG_MIPS32_O32 disabled and CONFIG_CRYPTO_RSA enabled: lib/mpi/generic_mpih-mul1.c:37:24: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:664:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w0)) ~~~~~~~~~~^~~ lib/mpi/generic_mpih-mul1.c:37:13: error: invalid use of a cast in a inline asm context requiring an l-value: remove the cast or build with -fheinous-gnu-extensions umul_ppmm(prod_high, prod_low, s1_ptr[j], s2_limb); ~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ lib/mpi/longlong.h:668:22: note: expanded from macro 'umul_ppmm' : "=d" ((UDItype)(w1)) ~~~~~~~~~~^~~ 2 errors generated. This special case for umul_ppmm for MIPS64r6 was added in commit bbc25bee ("lib/mpi: Fix umul_ppmm() for MIPS64r6"), due to GCC being inefficient and emitting a __multi3 intrinsic. There is no such issue with clang; with this patch applied, I can build this configuration without any problems and there are no link errors like mentioned in the commit above (which I can still reproduce with GCC 9.3.0 when that commit is reverted). Only use this definition when GCC is being used. This really should have been caught by commit b0c091ae ("lib/mpi: Eliminate unused umul_ppmm definitions for MIPS") when I was messing around in this area but I was not testing 64-bit MIPS at the time. Link: https://github.com/ClangBuiltLinux/linux/issues/885Reported-by:
Dmitry Golovin <dima@golovin.in> Signed-off-by:
Nathan Chancellor <natechancellor@gmail.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Doug Berger authored
[ Upstream commit 72f96347 ] This commit explicitly calls the bcmgenet_set_rx_mode() function when the network interface is started. This function is normally called by ndo_set_rx_mode when the flags are changed, but apparently not when the driver is suspended and resumed. This change ensures that address filtering or promiscuous mode are properly restored by the driver after the MAC may have been reset. Fixes: b6e978e5 ("net: bcmgenet: add suspend/resume callbacks") Signed-off-by:
Doug Berger <opendmb@gmail.com> Acked-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Andrii Nakryiko authored
[ Upstream commit 9f56bb53 ] getline() allocates string, which has to be freed. Fixes: 81f77fd0 ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID") Signed-off-by:
Andrii Nakryiko <andriin@fb.com> Signed-off-by:
Alexei Starovoitov <ast@kernel.org> Cc: Song Liu <songliubraving@fb.com> Link: https://lore.kernel.org/bpf/20200429012111.277390-7-andriin@fb.comSigned-off-by:
-
Pablo Neira Ayuso authored
[ Upstream commit 0d7c8346 ] Instead of EINVAL which should be used for malformed netlink messages. Fixes: eb31628e ("netfilter: nf_tables: Add support for IPv6 NAT") Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Paul Moore authored
[ Upstream commit 3054d067 ] If audit_list_rules_send() fails when trying to create a new thread to send the rules it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error patch and renames audit_send_list() to audit_send_list_thread() to better match its cousin, audit_send_reply_thread(). Reported-by: teroincn@gmail.com Reviewed-by:
Richard Guy Briggs <rgb@redhat.com> Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Hans de Goede authored
[ Upstream commit c03ee9af ] Currently the bcm_uart_subver_ and bcm_usb_subver_table-s lack entries for the BCM4324B5 and BCM20703A1 chipsets. This makes the code use just "BCM" as prefix for the filename to pass to request-firmware, making it harder for users to figure out which firmware they need. This especially is problematic with the UART attached BCM4324B5 where this leads to the filename being just "BCM.hcd". Add the 2 missing devices to subver tables. This has been tested on: 1. A Dell XPS15 9550 where this makes btbcm.c try to load "BCM20703A1-0a5c-6410.hcd" before it tries to load "BCM-0a5c-6410.hcd". 2. A Thinkpad 8 where this makes btbcm.c try to load "BCM4324B5.hcd" before it tries to load "BCM.hcd" Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
Tiezhu Yang authored
[ Upstream commit 269b3a9a ] In the current code, if CONFIG_SWIOTLB is set, when failed to get IO TLB memory from the low pages by plat_swiotlb_setup(), it may lead to the boot process failed with kernel panic. (1) On the Loongson and SiByte platform arch/mips/loongson64/dma.c arch/mips/sibyte/common/dma.c void __init plat_swiotlb_setup(void) { swiotlb_init(1); } kernel/dma/swiotlb.c void __init swiotlb_init(int verbose) { ... vstart = memblock_alloc_low(PAGE_ALIGN(bytes), PAGE_SIZE); if (vstart && !swiotlb_init_with_tbl(vstart, io_tlb_nslabs, verbose)) return; ... pr_warn("Cannot allocate buffer"); no_iotlb_memory = true; } phys_addr_t swiotlb_tbl_map_single() { ... if (no_iotlb_memory) panic("Can not allocate SWIOTLB buffer earlier ..."); ... } (2) On the Cavium OCTEON platform arch/mips/cavium-octeon/dma-octeon.c void __init plat_swiotlb_setup(void) { ... octeon_swiotlb = memblock_alloc_low(swiotlbsize, PAGE_SIZE); if (!octeon_swiotlb) panic("%s: Failed to allocate %zu bytes align=%lx\n", __func__, swiotlbsize, PAGE_SIZE); ... } Because IO_TLB_DEFAULT_SIZE is 64M, if the rest size of low memory is less than 64M when call plat_swiotlb_setup(), we can easily reproduce the panic case. In order to reduce the possibility of kernel panic when failed to get IO TLB memory under CONFIG_SWIOTLB, it is better to allocate low memory as small as possible before plat_swiotlb_setup(), so make sparse_init() using top-down allocation. Reported-by:
Juxin Gao <gaojuxin@loongson.cn> Co-developed-by:
Tiezhu Yang <yangtiezhu@loongson.cn> Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Kieran Bingham authored
[ Upstream commit dd844fb8 ] Enabling CONFIG_DMA_API_DEBUG=y and CONFIG_DMA_API_DEBUG_SG=y will enable extra validation on DMA operations ensuring that the size restraints are met. When using the FCP in conjunction with the VSP1/DU, and display frames, the size of the DMA operations is larger than the default maximum segment size reported by the DMA core (64K). With the DMA debug enabled, this produces a warning such as the following: "DMA-API: rcar-fcp fea27000.fcp: mapping sg segment longer than device claims to support [len=3145728] [max=65536]" We have no specific limitation on the segment size which isn't already handled by the VSP1/DU which actually handles the DMA allcoations and buffer management, so define a maximum segment size of up to 4GB (a 32 bit mask). Reported-by:
Geert Uytterhoeven <geert+renesas@glider.be> Fixes: 7b49235e ("[media] v4l: Add Renesas R-Car FCP driver") Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by:
Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 96f3a939 ] Currently when i2c transfers fail the error return -EREMOTEIO is assigned to err but then later overwritten when the tuner attach call is made. Fix this by returning early with the error return code -EREMOTEIO on i2c transfer failure errors. If the transfer fails, an uninitialized value will be read from b2. Addresses-Coverity: ("Unused value") Fixes: fbfee868 ("V4L/DVB (5651): Dibusb-mb: convert pll handling to properly use dvb-pll") Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Sean Young <sean@mess.org> Signed-off-by:
-
Paul Moore authored
[ Upstream commit a48b284b ] If audit_send_reply() fails when trying to create a new thread to send the reply it also fails to cleanup properly, leaking a reference to a net structure. This patch fixes the error path and makes a handful of other cleanups that came up while fixing the code. Reported-by: teroincn@gmail.com Reviewed-by:
-
Jitao Shi authored
[ Upstream commit b0ff9b59 ] Add property "pinctrl-names" to swap pin mode between gpio and dpi mode. Set the dpi pins to gpio mode and output-low to avoid leakage current when dpi disabled. Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Jitao Shi <jitao.shi@mediatek.com> Signed-off-by:
Chun-Kuang Hu <chunkuang.hu@kernel.org> Signed-off-by:
-
Kees Cook authored
[ Upstream commit a34c7f51 ] Variables declared in a switch statement before any case statements cannot be automatically initialized with compiler instrumentation (as they are not part of any execution flow). With GCC's proposed automatic stack variable initialization feature, this triggers a warning (and they don't get initialized). Clang's automatic stack variable initialization (via CONFIG_INIT_STACK_ALL=y) doesn't throw a warning, but it also doesn't initialize such variables[1]. Note that these warnings (or silent skipping) happen before the dead-store elimination optimization phase, so even when the automatic initializations are later elided in favor of direct initializations, the warnings remain. To avoid these problems, move such variables into the "case" where they're used or lift them up into the main function body. drivers/net/ethernet/intel/e1000/e1000_main.c: In function ‘e1000_xmit_frame’: drivers/net/ethernet/intel/e1000/e1000_main.c:3143:18: warning: statement will never be executed [-Wswitch-unreachable] 3143 | unsigned int pull_size; | ^~~~~~~~~ [1] https://bugs.llvm.org/show_bug.cgi?id=44916Signed-off-by:
Kees Cook <keescook@chromium.org> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by:
-
Stephane Eranian authored
[ Upstream commit c6fddb28 ] The xxx_mountpoint() interface provided by fs.c finds mount points for common pseudo filesystems. The first time xxx_mountpoint() is invoked, it scans the mount table (/proc/mounts) looking for a match. If found, it is cached. The price to scan /proc/mounts is paid once if the mount is found. When the mount point is not found, subsequent calls to xxx_mountpoint() scan /proc/mounts over and over again. There is no caching. This causes a scaling issue in perf record with hugeltbfs__mountpoint(). The function is called for each process found in synthesize__mmap_events(). If the machine has thousands of processes and if the /proc/mounts has many entries this could cause major overhead in perf record. We have observed multi-second slowdowns on some configurations. As an example on a laptop: Before: $ sudo umount /dev/hugepages $ strace -e trace=openat -o /tmp/tt perf record -a ls $ fgrep mounts /tmp/tt 285 After: $ sudo umount /dev/hugepages $ strace -e trace=openat -o /tmp/tt perf record -a ls $ fgrep mounts /tmp/tt 1 One could argue that the non-caching in case the moint point is not found is intentional. That way subsequent calls may discover a moint point if the sysadmin mounts the filesystem. But the same argument could be made against caching the mount point. It could be unmounted causing errors. It all depends on the intent of the interface. This patch assumes it is expected to scan /proc/mounts once. The patch documents the caching behavior in the fs.h header file. An alternative would be to just fix perf record. But it would solve the problem with hugetlbs__mountpoint() but there could be similar issues (possibly down the line) with other xxx_mountpoint() calls in perf or other tools. Signed-off-by:
Stephane Eranian <eranian@google.com> Reviewed-by:
Ian Rogers <irogers@google.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andrey Zhizhikin <andrey.z@gmail.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Kefeng Wang <wangkefeng.wang@huawei.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Petr Mladek <pmladek@suse.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lore.kernel.org/lkml/20200402154357.107873-3-irogers@google.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Jaehoon Chung authored
[ Upstream commit c5767385 ] sup_wpa feature is getting after setting feature_disable flag. If firmware is supported sup_wpa feature, it's always enabled regardless of feature_disable flag. Fixes: b8a64f0e ("brcmfmac: support 4-way handshake offloading for WPA/WPA2-PSK") Signed-off-by:
Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Link: https://lore.kernel.org/r/20200330052528.10503-1-jh80.chung@samsung.comSigned-off-by:
-
Christoph Hellwig authored
[ Upstream commit 5bf99174 ] vm_map_ram can keep mappings around after the vm_unmap_ram. Using that with non-PAGE_KERNEL mappings can lead to all kinds of aliasing issues. Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Acked-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Jia-Ju Bai authored
[ Upstream commit 3e1c6846 ] The value adapter->rss_conf is stored in DMA memory, and it is assigned to rssConf, so rssConf->indTableSize can be modified at anytime by malicious hardware. Because rssConf->indTableSize is assigned to n, buffer overflow may occur when the code "rssConf->indTable[n]" is executed. To fix this possible bug, n is checked after being used. Signed-off-by:
Jia-Ju Bai <baijiaju1990@gmail.com> Signed-off-by:
-
Jon Doron authored
[ Upstream commit f7d31e65 ] The problem the patch is trying to address is the fact that 'struct kvm_hyperv_exit' has different layout on when compiling in 32 and 64 bit modes. In 64-bit mode the default alignment boundary is 64 bits thus forcing extra gaps after 'type' and 'msr' but in 32-bit mode the boundary is at 32 bits thus no extra gaps. This is an issue as even when the kernel is 64 bit, the userspace using the interface can be both 32 and 64 bit but the same 32 bit userspace has to work with 32 bit kernel. The issue is fixed by forcing the 64 bit layout, this leads to ABI change for 32 bit builds and while we are obviously breaking '32 bit userspace with 32 bit kernel' case, we're fixing the '32 bit userspace with 64 bit kernel' one. As the interface has no (known) users and 32 bit KVM is rather baroque nowadays, this seems like a reasonable decision. Reviewed-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by:
Jon Doron <arilou@gmail.com> Message-Id: <20200424113746.3473563-2-arilou@gmail.com> Reviewed-by:
Roman Kagan <rvkagan@yandex-team.ru> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 46164fde ] Tx-only DMA transfers are working perfectly fine since in this case the code just ignores the Rx FIFO overflow interrupts. But it turns out the SPI Rx-only transfers are broken since nothing pushing any data to the shift registers, so the Rx FIFO is left empty and the SPI core subsystems just returns a timeout error. Since DW DMAC driver doesn't support something like cyclic write operations of a single byte to a device register, the only way to support the Rx-only SPI transfers is to fake it by using a dummy Tx-buffer. This is what we intend to fix in this commit by setting the SPI_CONTROLLER_MUST_TX flag for DMA-capable platform. Signed-off-by:
Serge Semin <Sergey.Semin@baikalelectronics.ru> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Cc: Ramil Zaripov <Ramil.Zaripov@baikalelectronics.ru> Cc: Alexey Malahov <Alexey.Malahov@baikalelectronics.ru> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Feng Tang <feng.tang@intel.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: linux-mips@vger.kernel.org Cc: devicetree@vger.kernel.org Link: https://lore.kernel.org/r/20200529131205.31838-9-Sergey.Semin@baikalelectronics.ruSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Martin Blumenstingl authored
[ Upstream commit 91995b90 ] The vendor driver (from the 3.10 kernel) triggers a soft reset every time before starting a new command. While this fixes a problem where SDIO cards are not detected at all (because all commands simply timed out) this hurts SD card read performance a bit (in my tests between 10% to 20%). Trigger a soft reset after we got a CRC error or if the previous command timed out (just like the vendor driver from the same 3.10 kernel for the newer SDHC controller IP does). This fixes detection of SDIO cards and doesn't hurt SD card read performance at the same time. With this patch the initialization of an RTL8723BS SDIO card looks like this: req done (CMD52): -110: 00000000 00000000 00000000 00000000 clock 400000Hz busmode 2 powermode 2 cs 1 Vdd 21 width 1 timing 0 starting CMD0 arg 00000000 flags 000000c0 req done (CMD0): 0: 00000000 00000000 00000000 00000000 clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 0 starting CMD8 arg 000001aa flags 000002f5 req done (CMD8): -110: 00000000 00000000 00000000 00000000 starting CMD5 arg 00000000 flags 000002e1 req done (CMD5): 0: 90ff0000 00000000 00000000 00000000 starting CMD5 arg 00200000 flags 000002e1 req done (CMD5): 0: 90ff0000 00000000 00000000 00000000 starting CMD3 arg 00000000 flags 00000075 req done (CMD3): 0: 00010000 00000000 00000000 00000000 starting CMD7 arg 00010000 flags 00000015 req done (CMD7): 0: 00001e00 00000000 00000000 00000000 starting CMD52 arg 00000000 flags 00000195 req done (CMD52): 0: 00001032 00000000 00000000 00000000 [... more CMD52 omitted ...] clock 400000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2 clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 1 timing 2 starting CMD52 arg 00000e00 flags 00000195 req done (CMD52): 0: 00001000 00000000 00000000 00000000 starting CMD52 arg 80000e02 flags 00000195 req done (CMD52): 0: 00001002 00000000 00000000 00000000 clock 50000000Hz busmode 2 powermode 2 cs 0 Vdd 21 width 4 timing 2 starting CMD52 arg 00020000 flags 00000195 req done (CMD52): 0: 00001007 00000000 00000000 00000000 [... more CMD52 omitted ...] new high speed SDIO card at address 0001 Fixes: ed80a13b ("mmc: meson-mx-sdio: Add a driver for the Amlogic Meson8 and Meson8b SoCs") Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> Link: https://lore.kernel.org/r/20200503222805.2668941-1-martin.blumenstingl@googlemail.comTested-by:
Tobias Baumann <017623705678@o2online.de> Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Sven Eckelmann authored
[ Upstream commit 9ad346c9 ] The commit 8c46fcd7 ("batman-adv: disable ethtool link speed detection when auto negotiation off") disabled the usage of ethtool's link_ksetting when auto negotation was enabled due to invalid values when used with tun/tap virtual net_devices. According to the patch, automatic measurements should be used for these kind of interfaces. But there are major flaws with this argumentation: * automatic measurements are not implemented * auto negotiation has nothing to do with the validity of the retrieved values The first point has to be fixed by a longer patch series. The "validity" part of the second point must be addressed in the same patch series by dropping the usage of ethtool's link_ksetting (thus always doing automatic measurements over ethernet). Drop the patch again to have more default values for various net_device types/configurations. The user can still overwrite them using the batadv_hardif's BATADV_ATTR_THROUGHPUT_OVERRIDE. Reported-by:
Matthias Schiffer <mschiffer@universe-factory.net> Signed-off-by:
Sven Eckelmann <sven@narfation.org> Signed-off-by:
Simon Wunderlich <sw@simonwunderlich.de> Signed-off-by:
-
Linus Walleij authored
[ Upstream commit e1de9438 ] Recent work with KASan exposed the folling hard-coded bitmask in arch/arm/mm/proc-macros.S: bic rd, sp, #8128 bic rd, rd, #63 This forms the bitmask 0x1FFF that is coinciding with (PAGE_SIZE << THREAD_SIZE_ORDER) - 1, this code was assuming that THREAD_SIZE is always 8K (8192). As KASan was increasing THREAD_SIZE_ORDER to 2, I ran into this bug. Fix it by this little oneline suggested by Ard: bic rd, sp, #(THREAD_SIZE - 1) & ~63 Where THREAD_SIZE is defined using THREAD_SIZE_ORDER. We have to also include <linux/const.h> since the THREAD_SIZE expands to use the _AC() macro. Cc: Ard Biesheuvel <ardb@kernel.org> Cc: Florian Fainelli <f.fainelli@gmail.com> Suggested-by:
Ard Biesheuvel <ardb@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by:
-
Filipe Manana authored
[ Upstream commit 7e4a3f7e ] We are currently treating any non-zero return value from btrfs_next_leaf() the same way, by going to the code that inserts a new checksum item in the tree. However if btrfs_next_leaf() returns an error (a value < 0), we should just stop and return the error, and not behave as if nothing has happened, since in that case we do not have a way to know if there is a next leaf or we are currently at the last leaf already. So fix that by returning the error from btrfs_next_leaf(). Signed-off-by:
Filipe Manana <fdmanana@suse.com> Reviewed-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Serge Semin authored
[ Upstream commit 6d2e16a3 ] Commit 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") replaced a publicly available driver initialization method with one called by the timer_probe() method available after CLKSRC_OF. In current implementation it traverses all the timers available in the system and calls their initialization methods if corresponding devices were either in dtb or in acpi. But if before the commit any number of available timers would be installed as clockevent and clocksource devices, after that there would be at most two. The rest are just ignored since default case branch doesn't do anything. I don't see a reason of such behaviour, neither the commit message explains it. Moreover this might be wrong if on some platforms these timers might be used for different purpose, as virtually CPU-local clockevent timers and as an independent broadcast timer. So in order to keep the compatibility with the platforms where the order of the timers detection has some meaning, lets add the secondly discovered timer to be of clocksource/sched_clock type, while the very first and the others would provide the clockevents service. Fixes: 10021488 ("clocksource: dw_apb_timer_of: use clocksource_of_init") Signed-off-by:
Daniel Lezcano <daniel.lezcano@linaro.org> Link: https://lore.kernel.org/r/20200521204818.25436-7-Sergey.Semin@baikalelectronics.ruSigned-off-by:
-
Serge Semin authored
[ Upstream commit cee43dbf ] Currently the DW APB Timer driver binds each clockevent timers to a particular CPU. This isn't good for multiple reasons. First of all seeing the device is placed on APB bus (which makes it accessible from any CPU core), accessible over MMIO and having the DYNIRQ flag set we can be sure that manually binding the timer to any CPU just isn't correct. By doing so we just set an extra limitation on device usage. This also doesn't reflect the device actual capability, since by setting the IRQ affinity we can make it virtually local to any CPU. Secondly imagine if you had a real CPU-local timer with the same rating and the same CPU-affinity. In this case if DW APB timer was registered first, then due to the clockevent framework tick-timer selection procedure we'll end up with the real CPU-local timer being left unselected for clock-events tracking. But on most of the platforms (MIPS/ARM/etc) such timers are normally embedded into the CPU core and are accessible with much better performance then devices placed on APB. For instance in MIPS architectures there is r4k-timer, which is CPU-local, assigned with the same rating, and normally its clockevent device is registered after the platform-specific one. So in order to fix all of these issues let's make the DW APB Timer CPU affinity being optional and deactivated by passing a negative CPU id, which will effectively set the DW APB clockevent timer cpumask to 'cpu_possible_mask'. Signed-off-by:
-
Serge Semin authored
[ Upstream commit 43dba9f3 ] It's pointless to track the Tx overrun interrupts if Rx-only SPI transfer is issued. Similarly there is no need in handling the Rx overrun/underrun interrupts if Tx-only SPI transfer is executed. So lets unmask the interrupts only if corresponding SPI transactions are implied. Co-developed-by:
Georgy Vlasov <Georgy.Vlasov@baikalelectronics.ru> Signed-off-by:
-
Douglas Anderson authored
[ Upstream commit 3ca676e4 ] If we detect that we recursively entered the debugger we should hack our I/O ops to NULL so that the panic() in the next line won't actually cause another recursion into the debugger. The first line of kgdb_panic() will check this and return. Signed-off-by:
Douglas Anderson <dianders@chromium.org> Reviewed-by:
Daniel Thompson <daniel.thompson@linaro.org> Link: https://lore.kernel.org/r/20200507130644.v4.6.I89de39f68736c9de610e6f241e68d8dbc44bc266@changeidSigned-off-by:
-
Douglas Anderson authored
[ Upstream commit 202164fb ] In commit 81eaadca ("kgdboc: disable the console lock when in kgdb") we avoided the WARN_CONSOLE_UNLOCKED() yell when we were in kgdboc. That still works fine, but it turns out that we get a similar yell when using other I/O drivers. One example is the "I/O driver" for the kgdb test suite (kgdbts). When I enabled that I again got the same yells. Even though "kgdbts" doesn't actually interact with the user over the console, using it still causes kgdb to print to the consoles. That trips the same warning: con_is_visible+0x60/0x68 con_scroll+0x110/0x1b8 lf+0x4c/0xc8 vt_console_print+0x1b8/0x348 vkdb_printf+0x320/0x89c kdb_printf+0x68/0x90 kdb_main_loop+0x190/0x860 kdb_stub+0x2cc/0x3ec kgdb_cpu_enter+0x268/0x744 kgdb_handle_exception+0x1a4/0x200 kgdb_compiled_brk_fn+0x34/0x44 brk_handler+0x7c/0xb8 do_debug_exception+0x1b4/0x228 Let's increment/decrement the "ignore_console_lock_warning" variable all the time when we enter the debugger. This will allow us to later revert commit 81eaadca ("kgdboc: disable the console lock when in kgdb"). Signed-off-by:
-
Hsin-Yu Chao authored
[ Upstream commit 56b5453a ] Bluetooth PTS test case HFP/AG/ACC/BI-12-I accepts SCO connection with invalid parameter at the first SCO request expecting AG to attempt another SCO request with the use of "safe settings" for given codec, base on section 5.7.1.2 of HFP 1.7 specification. This patch addresses it by adding "Invalid LMP Parameters" (0x1e) to the SCO fallback case. Verified with below log: < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 13 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x0380 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event: Number of Completed Packets (0x13) plen 5 Num handles: 1 Handle: 256 Count: 1 > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Invalid LMP Parameters / Invalid LL Parameters (0x1e) Handle: 0 Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x00 Retransmission window: 0x02 RX packet length: 0 TX packet length: 0 Air mode: Transparent (0x03) < HCI Command: Setup Synchronous Connection (0x01|0x0028) plen 17 Handle: 256 Transmit bandwidth: 8000 Receive bandwidth: 8000 Max latency: 8 Setting: 0x0003 Input Coding: Linear Input Data Format: 1's complement Input Sample Size: 8-bit # of bits padding at MSB: 0 Air Coding Format: Transparent Data Retransmission effort: Optimize for link quality (0x02) Packet type: 0x03c8 EV3 may be used 2-EV3 may not be used 3-EV3 may not be used 2-EV5 may not be used 3-EV5 may not be used > HCI Event: Command Status (0x0f) plen 4 Setup Synchronous Connection (0x01|0x0028) ncmd 1 Status: Success (0x00) > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 5 > HCI Event: Max Slots Change (0x1b) plen 3 Handle: 256 Max slots: 1 > HCI Event: Synchronous Connect Complete (0x2c) plen 17 Status: Success (0x00) Handle: 257 Address: 00:1B:DC:F2:21:59 (OUI 00-1B-DC) Link type: eSCO (0x02) Transmission interval: 0x06 Retransmission window: 0x04 RX packet length: 30 TX packet length: 30 Air mode: Transparent (0x03) Signed-off-by:
Hsin-Yu Chao <hychao@chromium.org> Signed-off-by:
-
Tiezhu Yang authored
[ Upstream commit a44de749 ] When ATI Radeon GPU driver has been compiled directly into the kernel instead of as a module, we should make sure the firmware for the model (check available ones in /lib/firmware/radeon) is built-in to the kernel as well, otherwise there exists the following fatal error during GPU init, change CONFIG_DRM_RADEON=y to CONFIG_DRM_RADEON=m to fix it. [ 1.900997] [drm] Loading RS780 Microcode [ 1.905077] radeon 0000:01:05.0: Direct firmware load for radeon/RS780_pfp.bin failed with error -2 [ 1.914140] r600_cp: Failed to load firmware "radeon/RS780_pfp.bin" [ 1.920405] [drm:r600_init] *ERROR* Failed to load firmware! [ 1.926069] radeon 0000:01:05.0: Fatal error during GPU init [ 1.931729] [drm] radeon: finishing device. Fixes: 024e6a8b ("MIPS: Loongson: Add a Loongson-3 default config file") Signed-off-by:
-
Jesper Dangaard Brouer authored
[ Upstream commit 88eb0ee1 ] The ixgbe driver have another memory model when compiled on archs with PAGE_SIZE above 4096 bytes. In this mode it doesn't split the page in two halves, but instead increment rx_buffer->page_offset by truesize of packet (which include headroom and tailroom for skb_shared_info). This is done correctly in ixgbe_build_skb(), but in ixgbe_rx_buffer_flip which is currently only called on XDP_TX and XDP_REDIRECT, it forgets to add the tailroom for skb_shared_info. This breaks XDP_REDIRECT, for veth and cpumap. Fix by adding size of skb_shared_info tailroom. Maintainers notice: This fix have been queued to Jeff. Fixes: 64530739 ("ixgbe: add initial support for xdp redirect") Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Luke Nelson authored
[ Upstream commit 579d1b3f ] This patch fixes two issues present in the current function for encoding arm64 logical immediates when using the 32-bit variants of instructions. First, the code does not correctly reject an all-ones 32-bit immediate, and returns an undefined instruction encoding. Second, the code incorrectly rejects some 32-bit immediates that are actually encodable as logical immediates. The root cause is that the code uses a default mask of 64-bit all-ones, even for 32-bit immediates. This causes an issue later on when the default mask is used to fill the top bits of the immediate with ones, shown here: /* * Pattern: 0..01..10..01..1 * * Fill the unused top bits with ones, and check if * the result is a valid immediate (all ones with a * contiguous ranges of zeroes). */ imm |= ~mask; if (!range_of_ones(~imm)) return AARCH64_BREAK_FAULT; To see the problem, consider an immediate of the form 0..01..10..01..1, where the upper 32 bits are zero, such as 0x80000001. The code checks if ~(imm | ~mask) contains a range of ones: the incorrect mask yields 1..10..01..10..0, which fails the check; the correct mask yields 0..01..10..0, which succeeds. The fix for both issues is to generate a correct mask based on the instruction immediate size, and use the mask to check for all-ones, all-zeroes, and values wider than the mask. Currently, arch/arm64/kvm/va_layout.c is the only user of this function, which uses 64-bit immediates and therefore won't trigger these bugs. We tested the new code against llvm-mc with all 1,302 encodable 32-bit logical immediates and all 5,334 encodable 64-bit logical immediates. Fixes: ef3935ee ("arm64: insn: Add encoder for bitwise operations using literals") Suggested-by:
Will Deacon <will@kernel.org> Co-developed-by:
Xi Wang <xi.wang@gmail.com> Signed-off-by:
Luke Nelson <luke.r.nels@gmail.com> Reviewed-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20200508181547.24783-2-luke.r.nels@gmail.comSigned-off-by:
-
Andy Shevchenko authored
[ Upstream commit 3cb97e22 ] Some DMA controller drivers do not tolerate non-zero values in the DMA configuration structures. Zero them to avoid issues with such DMA controller drivers. Even despite above this is a good practice per se. Fixes: 7063c0d9 ("spi/dw_spi: add DMA support") Signed-off-by:
Feng Tang <feng.tang@intel.com> Cc: Feng Tang <feng.tang@intel.com> Link: https://lore.kernel.org/r/20200506153025.21441-1-andriy.shevchenko@linux.intel.comSigned-off-by:
-
Daniel Thompson authored
[ Upstream commit ab8ad279 ] flush_icache_range() contains a bodge to avoid issuing IPIs when the kgdb trap handler is running because issuing IPIs is unsafe (and not needed) in this execution context. However the current test, based on kgdb_connected is flawed: it both over-matches and under-matches. The over match occurs because kgdb_connected is set when gdb attaches to the stub and remains set during normal running. This is relatively harmelss because in almost all cases irq_disabled() will be false. The under match is more serious. When kdb is used instead of kgdb to access the debugger then kgdb_connected is not set in all the places that the debug core updates sw breakpoints (and hence flushes the icache). This can lead to deadlock. Fix by replacing the ad-hoc check with the proper kgdb macro. This also allows us to drop the #ifdef wrapper. Fixes: 3b8c9f1c ("arm64: IPI each CPU after invalidating the I-cache for kernel mappings") Signed-off-by:
-
Ard Biesheuvel authored
[ Upstream commit f77767ed ] When building the x86 EFI stub with Clang, the libstub Makefile rules that manipulate the ELF object files may throw an error like: STUBCPY drivers/firmware/efi/libstub/efi-stub-helper.stub.o strip: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10 objcopy: drivers/firmware/efi/libstub/efi-stub-helper.stub.o: Failed to find link section for section 10 This is the result of a LLVM feature [0] where symbol references are stored in a LLVM specific .llvm_addrsig section in a non-transparent way, causing generic ELF tools such as strip or objcopy to choke on them. So force the compiler not to emit these sections, by passing the appropriate command line option. [0] https://sourceware.org/bugzilla/show_bug.cgi?id=23817 Cc: Nick Desaulniers <ndesaulniers@google.com> Cc: Peter Collingbourne <pcc@google.com> Cc: Sami Tolvanen <samitolvanen@google.com> Reported-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Fangrui Song <maskray@google.com> Signed-off-by:
-
Arthur Kiyanovski authored
[ Upstream commit e9a1de37 ] In case the "func" parameter is NULL we now return "-EINVAL". This shouldn't happen in general, but when it does happen, this is the proper way to handle it. We also check func for NULL in the beginning of the function, as there is no reason to do all the work and realize in the end of the function it was useless. Signed-off-by:
Sameeh Jubran <sameehj@amazon.com> Signed-off-by:
Arthur Kiyanovski <akiyano@amazon.com> Signed-off-by:
-
Mark Starovoytov authored
[ Upstream commit d0f23741 ] This patch fixes potential crash in case if hw_get_regs is NULL. Signed-off-by:
Mark Starovoytov <mstarovoitov@marvell.com> Signed-off-by:
-
Evan Green authored
[ Upstream commit 6eefaee4 ] With a couple allies at Intel, and much badgering, I got confirmation from Intel that at least BXT suffers from the same SPI chip-select issue as Cannonlake (and beyond). The issue being that after going through runtime suspend/resume, toggling the chip-select line without also sending data does nothing. Add the quirk to BXT to briefly toggle dynamic clock gating off and on, forcing the fabric to wake up enough to notice the CS register change. Signed-off-by:
Evan Green <evgreen@chromium.org> Cc: Shobhit Srivastava <shobhit.srivastava@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20200427163238.1.Ib1faaabe236e37ea73be9b8dcc6aa034cb3c8804@changeidSigned-off-by:
-
Julien Thierry authored
[ Upstream commit 7170cf47 ] The .alternatives section can contain entries with no original instructions. Objtool will currently crash when handling such an entry. Just skip that entry, but still give a warning to discourage useless entries. Signed-off-by:
Julien Thierry <jthierry@redhat.com> Acked-by:
Miroslav Benes <mbenes@suse.cz> Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Brad Love authored
[ Upstream commit e955f959 ] Getting the Xtal trim property to check if running is less error prone. Reset if_frequency if state is unknown. Replaces the previous "garbage check". Signed-off-by:
Brad Love <brad@nextdimension.cc> Signed-off-by:
-
