We kmemdup() templates, so they can be const.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Compare bits up to the source address's prefix length only to
allows DNS load balancing to continue to be used as a tie breaker.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Added labels for site-local addresses (fec0::/10) and 6bone testing
addresses (3ffe::/16) in order to depreference them.

Note that the RFC introduced new rows for Teredo, ULA and 6to4 addresses
in the default policy table.  Some of them have different labels from ours.
For backward compatibility, we do not change the "default" labels.
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The scsi netlink code confuses the netlink port id with a process id,
going so far as to read NETLINK_CREDS(skb)->pid instead of the correct
NETLINK_CB(skb).pid.  Fortunately it does not matter because nothing
registers to respond to scsi netlink requests.

The only interesting use of the scsi_netlink interface is
fc_host_post_vendor_event which sends a netlink multicast message.

Since nothing registers to handle scsi netlink messages kill all of the
registration logic, while retaining the same error handling behavior
preserving the userspace visible behavior and removing all of the
confused code that thought a netlink port id was a process id.

This was tested with a kernel allyesconfig build which had no problems.

Cc: James Bottomley <James.Bottomley@parallels.com>
Cc: James Smart <James.Smart@Emulex.Com>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace the current (inefficient) for-loop with memcpy, to copy priomap.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The update_netdev_tables() function appears to be unnecessary, since the
write_update_netdev_table() function will adjust the priomaps as and when
required anyway. So drop the usage of update_netdev_tables() entirely.
Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Change various flows in the bnx2x driver which up until now flapped
the link - these flows now benefit from the link flap avoidance mechanism.

This includes the removal of the link reset made upon nic init, as it is
possible the link is already active at that time.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Various flows in the bnx2x driver cause a link-flap - if the link
is up, it would be toggled down (after a mac/phy reset) and then
taken back up.

In many of these cases, there is no need to do cause such a flap,
as the associated flows should not actually affect the link.

This patch adds the 'Link Flap Avoidance' mechanism, which allows
the driver to better determine if a given flow requires a link change,
and thus minimize the number of link flaps caused by the driver.
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Separate the interrupt setting part of each external PHY to a specific
function.
This allows calling the interrupt setting in case of link-flap avoidance,
since some link owners may not enable the interrupt on their own.
Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pablo Neira Ayuso says:

====================
The following patchset contains four Netfilter updates, mostly targeting
to fix issues added with IPv6 NAT, and one little IPVS update for net-next:

* Remove unneeded conditional free of skb in nfnetlink_queue, from
  Wei Yongjun.

* One semantic path from coccinelle detected the use of list_del +
  INIT_LIST_HEAD, instead of list_del_init, again from Wei Yongjun.

* Fix out-of-bound memory access in the NAT address selection, from
  Florian Westphal. This was introduced with the IPv6 NAT patches.

* Two fixes for crashes that were introduced in the recently merged
  IPv6 NAT support, from myself.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

(c7232c99 netfilter: add protocol independent NAT core) added
incorrect locking for the module auto-load case in ctnetlink_parse_nat.

That function is always called from ctnetlink_create_conntrack which
requires no locking.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

commit b6069a95 (filter: add MOD operation) added generic
support for modulus operation in BPF.

This patch brings JIT support for x86_64
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: George Bakos <gbakos@alpinista.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch enables boards with 54618SE phys and a sufficiently new
firmware to use native EEE instead of auto-greeen.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In order to lay the foundation for 1G EEE support, several segments of code
which are common to both 1G and 10G EEE configurations were extracted from
the 10G EEE configuration flow to their own functions.
E.g., bnx2x_eee_initial_config, bnx2x_eee_advertise, bnx2x_eee_disable, etc.

The rest of the EEE functions were relocated and placed in a single,
continuous section of the file.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Prevent functions from disabling EEE to other functions using other ports.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch aligns the EEE status with that of all other link properties,
by changing the way its accessed - instead of a direct read to the shared
memory, each function maintain its own copy locally.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

After this commit:
	commit 97cac082
	Author: David S. Miller <davem@davemloft.net>
	Date:   Mon Jul 2 22:43:47 2012 -0700

	    ipv6: Store route neighbour in rt6_info struct.

we no longer use RCU to protect route neighbour.

Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Cong Wang <amwang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

a lot of code has either the memset or an inefficient copy
from a static array that contains the all-zeros Ethernet address.
Introduce help function eth_zero_addr() to fill an address with
all zeros, making the code clearer and allowing us to get rid of
some constant arrays.
Signed-off-by: Duan Jiong <djduanjiong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Update version to 2.5.13.
Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

To save memory and to exit IRQ loop quicker on devices that don't support
FCoE.
Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will make it easier to exit IRQ loop and re-arm IRQ on devices that
don't support FCoE.
Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This will free up unneeded memory.
Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

These functions are needed to free up memory when the rings are no longer
needed.
Reviewed-by: Eddie Wai <eddie.wai@broadcom.com>
Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
Signed-off-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a new ALU opcode, to compute a modulus.

Commit ffe06c17 used an ancillary to implement XOR_X,
but here we reserve one of the available ALU opcode to implement both
MOD_X and MOD_K
Signed-off-by: Eric Dumazet <edumazet@google.com>
Suggested-by: George Bakos <gbakos@alpinista.org>
Cc: Jay Schulist <jschlst@samba.org>
Cc: Jiri Pirko <jpirko@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

When a policy expiration is triggered from user space the request
travels through km_policy_expired and ultimately into
xfrm_exp_policy_notify which calls build_polexpire.  build_polexpire
uses the netlink port passed to km_policy_expired as the source port for
the netlink message it builds.

When a state expiration is triggered from user space the request travles
through km_state_expired and ultimately into xfrm_exp_state_notify which
calls build_expire.  build_expire uses the netlink port passed to
km_state_expired as the source port for the netlink message it builds.

Pass nlh->nlmsg_pid from the user generated netlink message that
requested the expiration to km_policy_expired and km_state_expired
instead of current->pid which is not a netlink port number.

Cc: Jamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is a frequent mistake to confuse the netlink port identifier with a
process identifier.  Try to reduce this confusion by renaming fields
that hold port identifiers portid instead of pid.

I have carefully avoided changing the structures exported to
userspace to avoid changing the userspace API.

I have successfully built an allyesconfig kernel with this change.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Using list_del_init() instead of list_del() + INIT_LIST_HEAD().

spatch with a semantic match is used to found this problem.
(http://coccinelle.lip6.fr/)
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Remove pointless conditional before kfree_skb().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

include/linux/jhash.h:138:16: warning: array subscript is above array bounds
[jhash2() expects the number of u32 in the key]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

This patch defines netlink_kernel_create as a wrapper function of
__netlink_kernel_create to hide the struct module *me parameter
(which seems to be THIS_MODULE in all existing netlink subsystems).

Suggested by David S. Miller.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Replace netlink_set_nonroot by one new field `flags' in
struct netlink_kernel_cfg that is passed to netlink_kernel_create.

This patch also renames NL_NONROOT_* to NL_CFG_F_NONROOT_* since
now the flags field in nl_table is generic (so we can add more
flags if needed in the future).

Also adjust all callers in the net-next tree to use these flags
instead of netlink_set_nonroot.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

mdio-mux-mmioreg.c uses function of_address_to_resource(), which is defined
in linux/of_address.h.  This fixes a compilation error:

drivers/net/phy/mdio-mux-mmioreg.c: In function 'mdio_mux_mmioreg_probe':
drivers/net/phy/mdio-mux-mmioreg.c:83:2: error: implicit declaration of
	function 'of_address_to_resource'
Reported-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

We dont use jhash anymore since route cache removal,
so we can get rid of get_random_bytes() calls for rt_genid
changes.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Refactoring the bind code lets us use a common driver_info struct
for all supported devices, simplifying the code a bit.  The
real advantage is that devices using the CDC ECM interface
layout now also can be added dynamically using the new_id sysfs
interface.  This simplifies testing of new devices.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

QMI requests exceeding 1500 bytes are possible and
device firmware does not handle fragmented messages
very well.  It is therefore necessary to increase
the maximum message size from the current 512 bytes.

The protocol message size limit is not documented
in any publicly known source, but the out of tree
driver from CodeAurora use 4 kB.  This is therefore
chosen as the new arbitrary default until the real
limit is known.

This should allow any QMI message to be transmitted
without fragmentation, fixing known issues with GPS
assistance data upload.
Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>

Since route cache deletion (89aef892), delay is no
more used. Remove it.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Passing uids and gids on NETLINK_CB from a process in one user
namespace to a process in another user namespace can result in the
wrong uid or gid being presented to userspace.  Avoid that problem by
passing kuids and kgids instead.

- define struct scm_creds for use in scm_cookie and netlink_skb_parms
  that holds uid and gid information in kuid_t and kgid_t.

- Modify scm_set_cred to fill out scm_creds by heand instead of using
  cred_to_ucred to fill out struct ucred.  This conversion ensures
  userspace does not get incorrect uid or gid values to look at.

- Modify scm_recv to convert from struct scm_creds to struct ucred
  before copying credential values to userspace.

- Modify __scm_send to populate struct scm_creds on in the scm_cookie,
  instead of just copying struct ucred from userspace.

- Modify netlink_sendmsg to copy scm_creds instead of struct ucred
  into the NETLINK_CB.
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

igmp should call consume_skb() for all correctly processed packets,
to avoid false dropwatch/drop_monitor false positives.
Reported-by: Shawn Bohrer <sbohrer@rgmadvisors.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

removes unnecessary semicolon

Found by Coccinelle: http://coccinelle.lip6.fr/Signed-off-by: Peter Senna Tschudin <peter.senna@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>