- 15 Mar, 2021 38 commits
-
-
Paolo Bonzini authored
Thanks to the new macros that handle exception handling for SVM instructions, it is easier to just do the VMLOAD/VMSAVE in C. This is safe, as shown by the fact that the host reload is already done outside the assembly source. Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
Sean Christopherson authored
Skip PAUSE after interception to avoid unnecessarily re-executing the instruction in the guest, e.g. after regaining control post-yield. This is a benign bug as KVM disables PAUSE interception if filtering is off, including the case where pause_filter_count is set to zero. Signed-off-by:
Sean Christopherson <seanjc@google.com> Message-Id: <20210205005750.3841462-10-seanjc@google.com> Signed-off-by:
-
Sean Christopherson authored
Remove bizarre code that causes KVM to run RDPMC through the emulator when nrips is disabled. Accelerated emulation of RDPMC doesn't rely on any additional data from the VMCB, and SVM has generic handling for updating RIP to skip instructions when nrips is disabled. Signed-off-by:
-
Sean Christopherson authored
Move the entirety of the accelerated RDPMC emulation to x86.c, and assign the common handler directly to the exit handler array for VMX. SVM has bizarre nrips behavior that prevents it from directly invoking the common handler. The nrips goofiness will be addressed in a future patch. Signed-off-by:
-
Sean Christopherson authored
Move the trivial exit handlers, e.g. for instructions that KVM "emulates" as nops, to common x86 code. Assign the common handlers directly to the exit handler arrays and drop the vendor trampolines. Opportunistically use pr_warn_once() where appropriate. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Move the entirety of XSETBV emulation to x86.c, and assign the function directly to both VMX's and SVM's exit handlers, i.e. drop the unnecessary trampolines. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add another helper layer for VMLOAD+VMSAVE, the code is identical except for the one line that determines which VMCB is the source and which is the destination. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Add a helper to consolidate boilerplate for nested VM-Exits that don't provide any data in exit_info_*. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Synthesize a nested VM-Exit if L2 triggers an emulated triple fault instead of exiting to userspace, which likely will kill L1. Any flow that does KVM_REQ_TRIPLE_FAULT is suspect, but the most common scenario for L2 killing L1 is if L0 (KVM) intercepts a contributory exception that is _not_intercepted by L1. E.g. if KVM is intercepting #GPs for the VMware backdoor, a #GP that occurs in L2 while vectoring an injected #DF will cause KVM to emulate triple fault. Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
-
Paolo Bonzini authored
Refactor the svm_exit_handlers API to pass @vcpu instead of @svm to allow directly invoking common x86 exit handlers (in a future patch). Opportunistically convert an absurd number of instances of 'svm->vcpu' to direct uses of 'vcpu' to avoid pointless casting. No functional change intended. Signed-off-by:
-
Paolo Bonzini authored
The logic of update_cr0_intercept is pointlessly complicated. All svm_set_cr0 is compute the effective cr0 and compare it with the guest value. Inlining the function and simplifying the condition clarifies what it is doing. Signed-off-by: -
Sean Christopherson authored
Use trace_kvm_nested_vmenter_failed() and its macro magic to trace consistency check failures on nested VMRUN. Tracing such failures by running the buggy VMM as a KVM guest is often the only way to get a precise explanation of why VMRUN failed. Signed-off-by:
-
Sean Christopherson authored
Move KVM's CC() macro to x86.h so that it can be reused by nSVM. Debugging VM-Enter is as painful on SVM as it is on VMX. Rename the more visible macro to KVM_NESTED_VMENTER_CONSISTENCY_CHECK to avoid any collisions with the uber-concise "CC". Signed-off-by:
-
Krish Sadhukhan authored
The path for SVM_SET_NESTED_STATE needs to have the same checks for the CPU registers, as we have in the VMRUN path for a nested guest. This patch adds those missing checks to svm_set_nested_state(). Suggested-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
Krish Sadhukhan <krish.sadhukhan@oracle.com> Message-Id: <20201006190654.32305-3-krish.sadhukhan@oracle.com> Signed-off-by:
-
Paolo Bonzini authored
The VMLOAD/VMSAVE data is not taken from userspace, since it will not be restored on VMEXIT (it will be copied from VMCB02 to VMCB01). For clarity, replace the wholesale copy of the VMCB save area with a copy of that state only. Signed-off-by: -
Paolo Bonzini authored
Since L1 and L2 now use different VMCBs, most of the fields remain the same in VMCB02 from one L2 run to the next. Since KVM itself is not looking at VMCB12's clean field, for now not much can be optimized. However, in the future we could avoid more copies if the VMCB12's SEG and DT sections are clean. Signed-off-by: -
Paolo Bonzini authored
Since L1 and L2 now use different VMCBs, most of the fields remain the same from one L1 run to the next. svm_set_cr0 and other functions called by nested_svm_vmexit already take care of clearing the corresponding clean bits; only the TSC offset is special. Signed-off-by: -
Paolo Bonzini authored
Most fields were going to be overwritten by vmcb12 control fields, or do not matter at all because they are filled by the processor on vmexit. Therefore, we need not copy them from vmcb01 to vmcb02 on vmentry. Signed-off-by: -
Paolo Bonzini authored
Now that SVM is using a separate vmcb01 and vmcb02 (and also uses the vmcb12 naming) we can give clearer names to functions that write to and read from those VMCBs. Likewise, variables and parameters can be renamed from nested_vmcb to vmcb12. Signed-off-by: -
Cathy Avery authored
This patch moves the asid_generation from the vcpu to the vmcb in order to track the ASID generation that was active the last time the vmcb was run. If sd->asid_generation changes between two runs, the old ASID is invalid and must be changed. Suggested-by:
Cathy Avery <cavery@redhat.com> Message-Id: <20210112164313.4204-3-cavery@redhat.com> Signed-off-by:
-
Cathy Avery authored
This patch moves the physical cpu tracking from the vcpu to the vmcb in svm_switch_vmcb. If either vmcb01 or vmcb02 change physical cpus from one vmrun to the next the vmcb's previous cpu is preserved for comparison with the current cpu and the vmcb is marked dirty if different. This prevents the processor from using old cached data for a vmcb that may have been updated on a prior run on a different processor. It also moves the physical cpu check from svm_vcpu_load to pre_svm_run as the check only needs to be done at run. Suggested-by:
-
Cathy Avery authored
svm->vmcb will now point to a separate vmcb for L1 (not nested) or L2 (nested). The main advantages are removing get_host_vmcb and hsave, in favor of concepts that are shared with VMX. We don't need anymore to stash the L1 registers in hsave while L2 runs, but we need to copy the VMLOAD/VMSAVE registers from VMCB01 to VMCB02 and back. This more or less has the same cost, but code-wise nested_svm_vmloadsave can be reused. This patch omits several optimizations that are possible: - for simplicity there is some wholesale copying of vmcb.control areas which can go away. - we should be able to better use the VMCB01 and VMCB02 clean bits. - another possibility is to always use VMCB01 for VMLOAD and VMSAVE, thus avoiding the copy of VMLOAD/VMSAVE registers from VMCB01 to VMCB02 and back. Tested: kvm-unit-tests kvm self tests Loaded fedora nested guest on fedora Signed-off-by:
-
Sean Christopherson authored
Override the shadow root level in the MMU context when configuring NPT for shadowing nested NPT. The level is always tied to the TDP level of the host, not whatever level the guest happens to be using. Fixes: 096586fd ("KVM: nSVM: Correctly set the shadow NPT root level in its MMU role") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Don't strip the C-bit from the faulting address on an intercepted #PF, the address is a virtual address, not a physical address. Fixes: 0ede79e1 ("KVM: SVM: Clear C-bit from the page fault address") Cc: stable@vger.kernel.org Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
WARN if KVM is about to dereference a NULL pae_root or lm_root when loading an MMU, and convert the BUG() on a bad shadow_root_level into a WARN (now that errors are handled cleanly). With nested NPT, botching the level and sending KVM down the wrong path is all too easy, and the on-demand allocation of pae_root and lm_root means bugs crash the host. Obviously, KVM could unconditionally allocate the roots, but that's arguably a worse failure mode as it would potentially corrupt the guest instead of crashing it. Signed-off-by:
-
Sean Christopherson authored
For clarity, explicitly skip syncing roots if the MMU load failed instead of relying on the !VALID_PAGE check in kvm_mmu_sync_roots(). Signed-off-by:
-
Sean Christopherson authored
Unexport the MMU load and unload helpers now that they are no longer used (incorrectly) in vendor code. Opportunistically move the kvm_mmu_sync_roots() declaration into mmu.h, it should not be exposed to vendor code. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Defer unloading the MMU after a INVPCID until the instruction emulation has completed, i.e. until after RIP has been updated. On VMX, this is a benign bug as VMX doesn't touch the MMU when skipping an emulated instruction. However, on SVM, if nrip is disabled, the emulator is used to skip an instruction, which would lead to fireworks if the emulator were invoked without a valid MMU. Fixes: eb4b248e ("kvm: vmx: Support INVPCID in shadow paging mode") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Defer reloading the MMU after a EPTP successful EPTP switch. The VMFUNC instruction itself is executed in the previous EPTP context, any side effects, e.g. updating RIP, should occur in the old context. Practically speaking, this bug is benign as VMX doesn't touch the MMU when skipping an emulated instruction, nor does queuing a single-step #DB. No other post-switch side effects exist. Fixes: 41ab9372 ("KVM: nVMX: Emulate EPTP switching for the L1 hypervisor") Cc: stable@vger.kernel.org Signed-off-by:
-
Sean Christopherson authored
Set the C-bit in SPTEs that are set outside of the normal MMU flows, specifically the PDPDTRs and the handful of special cased "LM root" entries, all of which are shadow paging only. Note, the direct-mapped-root PDPTR handling is needed for the scenario where paging is disabled in the guest, in which case KVM uses a direct mapped MMU even though TDP is disabled. Fixes: d0ec49d4 ("kvm/x86/svm: Support Secure Memory Encryption within KVM") Cc: stable@vger.kernel.org Cc: Brijesh Singh <brijesh.singh@amd.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Signed-off-by:
-
Sean Christopherson authored
Exempt NULL PAE roots from the check to detect leaks, since kvm_mmu_free_roots() doesn't set them back to INVALID_PAGE. Stop hiding the WARNs to detect PAE root leaks behind MMU_WARN_ON, the hidden WARNs obviously didn't do their job given the hilarious number of bugs that could lead to PAE roots being leaked, not to mention the above false positive. Opportunistically delete a warning on root_hpa being valid, there's nothing special about 4/5-level shadow pages that warrants a WARN. Signed-off-by:
-
Sean Christopherson authored
Check the validity of the PDPTRs before allocating any of the PAE roots, otherwise a bad PDPTR will cause KVM to leak any previously allocated roots. Signed-off-by:
-
Sean Christopherson authored
Hold the mmu_lock for write for the entire duration of allocating and initializing an MMU's roots. This ensures there are MMU pages available and thus prevents root allocations from failing. That in turn fixes a bug where KVM would fail to free valid PAE roots if a one of the later roots failed to allocate. Add a comment to make_mmu_pages_available() to call out that the limit is a soft limit, e.g. KVM will temporarily exceed the threshold if a page fault allocates multiple shadow pages and there was only one page "available". Note, KVM _still_ leaks the PAE roots if the guest PDPTR checks fail. This will be addressed in a future commit. Cc: Ben Gardon <bgardon@google.com> Signed-off-by:
-
Sean Christopherson authored
Move the on-demand allocation of the pae_root and lm_root pages, used by nested NPT for 32-bit L1s, into a separate helper. This will allow a future patch to hold mmu_lock while allocating the non-special roots so that make_mmu_pages_available() can be checked once at the start of root allocation, and thus avoid having to deal with failure in the middle of root allocation. Signed-off-by:
-
Sean Christopherson authored
Allocate lm_root before the PAE roots so that the PAE roots aren't leaked if the memory allocation for the lm_root happens to fail. Note, KVM can still leak PAE roots if mmu_check_root() fails on a guest's PDPTR, or if mmu_alloc_root() fails due to MMU pages not being available. Those issues will be fixed in future commits. Signed-off-by:
-
Sean Christopherson authored
Grab 'mmu' and do s/vcpu->arch.mmu/mmu to shorten line lengths and yield smaller diffs when moving code around in future cleanup without forcing the new code to use the same ugly pattern. No functional change intended. Signed-off-by:
-
Sean Christopherson authored
Allocate the so called pae_root page on-demand, along with the lm_root page, when shadowing 32-bit NPT with 64-bit NPT, i.e. when running a 32-bit L1. KVM currently only allocates the page when NPT is disabled, or when L0 is 32-bit (using PAE paging). Note, there is an existing memory leak involving the MMU roots, as KVM fails to free the PAE roots on failure. This will be addressed in a future commit. Fixes: ee6268ba ("KVM: x86: Skip pae_root shadow allocation if tdp enabled") Fixes: b6b80c78 ("KVM: x86/mmu: Allocate PAE root array when using SVM's 32-bit NPT") Cc: stable@vger.kernel.org Reviewed-by:
Ben Gardon <bgardon@google.com> Signed-off-by:
-
Dongli Zhang authored
The new per-cpu stat 'nested_run' is introduced in order to track if L1 VM is running or used to run L2 VM. An example of the usage of 'nested_run' is to help the host administrator to easily track if any L1 VM is used to run L2 VM. Suppose there is issue that may happen with nested virtualization, the administrator will be able to easily narrow down and confirm if the issue is due to nested virtualization via 'nested_run'. For example, whether the fix like commit 88dddc11 ("KVM: nVMX: do not use dangling shadow VMCS after guest reset") is required. Cc: Joe Jin <joe.jin@oracle.com> Signed-off-by:
Dongli Zhang <dongli.zhang@oracle.com> Message-Id: <20210305225747.7682-1-dongli.zhang@oracle.com> Signed-off-by:
-
- 14 Mar, 2021 2 commits
-
-
Linus Torvalds authored
-
Alexey Dobriyan authored
Doing a prctl(PR_SET_MM, PR_SET_MM_AUXV, addr, 1); will copy 1 byte from userspace to (quite big) on-stack array and then stash everything to mm->saved_auxv. AT_NULL terminator will be inserted at the very end. /proc/*/auxv handler will find that AT_NULL terminator and copy original stack contents to userspace. This devious scheme requires CAP_SYS_RESOURCE. Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
