- 10 Jun, 2021 2 commits
-
-
Vlad Buslov authored
Function mlx5e_rep_neigh_update() wasn't updated to accommodate rtnl lock removal from TC filter update path and properly handle concurrent encap entry insertion/deletion which can lead to following use-after-free: [23827.464923] ================================================================== [23827.469446] BUG: KASAN: use-after-free in mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.470971] Read of size 4 at addr ffff8881d132228c by task kworker/u20:6/21635 [23827.472251] [23827.472615] CPU: 9 PID: 21635 Comm: kworker/u20:6 Not tainted 5.13.0-rc3+ #5 [23827.473788] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [23827.475639] Workqueue: mlx5e mlx5e_rep_neigh_update [mlx5_core] [23827.476731] Call Trace: [23827.477260] dump_stack+0xbb/0x107 [23827.477906] print_address_description.constprop.0+0x18/0x140 [23827.478896] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.479879] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.480905] kasan_report.cold+0x7c/0xd8 [23827.481701] ? mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.482744] kasan_check_range+0x145/0x1a0 [23827.493112] mlx5e_encap_take+0x72/0x140 [mlx5_core] [23827.494054] ? mlx5e_tc_tun_encap_info_equal_generic+0x140/0x140 [mlx5_core] [23827.495296] mlx5e_rep_neigh_update+0x41e/0x5e0 [mlx5_core] [23827.496338] ? mlx5e_rep_neigh_entry_release+0xb80/0xb80 [mlx5_core] [23827.497486] ? read_word_at_a_time+0xe/0x20 [23827.498250] ? strscpy+0xa0/0x2a0 [23827.498889] process_one_work+0x8ac/0x14e0 [23827.499638] ? lockdep_hardirqs_on_prepare+0x400/0x400 [23827.500537] ? pwq_dec_nr_in_flight+0x2c0/0x2c0 [23827.501359] ? rwlock_bug.part.0+0x90/0x90 [23827.502116] worker_thread+0x53b/0x1220 [23827.502831] ? process_one_work+0x14e0/0x14e0 [23827.503627] kthread+0x328/0x3f0 [23827.504254] ? _raw_spin_unlock_irq+0x24/0x40 [23827.505065] ? __kthread_bind_mask+0x90/0x90 [23827.505912] ret_from_fork+0x1f/0x30 [23827.506621] [23827.506987] Allocated by task 28248: [23827.507694] kasan_save_stack+0x1b/0x40 [23827.508476] __kasan_kmalloc+0x7c/0x90 [23827.509197] mlx5e_attach_encap+0xde1/0x1d40 [mlx5_core] [23827.510194] mlx5e_tc_add_fdb_flow+0x397/0xc40 [mlx5_core] [23827.511218] __mlx5e_add_fdb_flow+0x519/0xb30 [mlx5_core] [23827.512234] mlx5e_configure_flower+0x191c/0x4870 [mlx5_core] [23827.513298] tc_setup_cb_add+0x1d5/0x420 [23827.514023] fl_hw_replace_filter+0x382/0x6a0 [cls_flower] [23827.514975] fl_change+0x2ceb/0x4a51 [cls_flower] [23827.515821] tc_new_tfilter+0x89a/0x2070 [23827.516548] rtnetlink_rcv_msg+0x644/0x8c0 [23827.517300] netlink_rcv_skb+0x11d/0x340 [23827.518021] netlink_unicast+0x42b/0x700 [23827.518742] netlink_sendmsg+0x743/0xc20 [23827.519467] sock_sendmsg+0xb2/0xe0 [23827.520131] ____sys_sendmsg+0x590/0x770 [23827.520851] ___sys_sendmsg+0xd8/0x160 [23827.521552] __sys_sendmsg+0xb7/0x140 [23827.522238] do_syscall_64+0x3a/0x70 [23827.522907] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.523797] [23827.524163] Freed by task 25948: [23827.524780] kasan_save_stack+0x1b/0x40 [23827.525488] kasan_set_track+0x1c/0x30 [23827.526187] kasan_set_free_info+0x20/0x30 [23827.526968] __kasan_slab_free+0xed/0x130 [23827.527709] slab_free_freelist_hook+0xcf/0x1d0 [23827.528528] kmem_cache_free_bulk+0x33a/0x6e0 [23827.529317] kfree_rcu_work+0x55f/0xb70 [23827.530024] process_one_work+0x8ac/0x14e0 [23827.530770] worker_thread+0x53b/0x1220 [23827.531480] kthread+0x328/0x3f0 [23827.532114] ret_from_fork+0x1f/0x30 [23827.532785] [23827.533147] Last potentially related work creation: [23827.534007] kasan_save_stack+0x1b/0x40 [23827.534710] kasan_record_aux_stack+0xab/0xc0 [23827.535492] kvfree_call_rcu+0x31/0x7b0 [23827.536206] mlx5e_tc_del_fdb_flow+0x577/0xef0 [mlx5_core] [23827.537305] mlx5e_flow_put+0x49/0x80 [mlx5_core] [23827.538290] mlx5e_delete_flower+0x6d1/0xe60 [mlx5_core] [23827.539300] tc_setup_cb_destroy+0x18e/0x2f0 [23827.540144] fl_hw_destroy_filter+0x1d2/0x310 [cls_flower] [23827.541148] __fl_delete+0x4dc/0x660 [cls_flower] [23827.541985] fl_delete+0x97/0x160 [cls_flower] [23827.542782] tc_del_tfilter+0x7ab/0x13d0 [23827.543503] rtnetlink_rcv_msg+0x644/0x8c0 [23827.544257] netlink_rcv_skb+0x11d/0x340 [23827.544981] netlink_unicast+0x42b/0x700 [23827.545700] netlink_sendmsg+0x743/0xc20 [23827.546424] sock_sendmsg+0xb2/0xe0 [23827.547084] ____sys_sendmsg+0x590/0x770 [23827.547850] ___sys_sendmsg+0xd8/0x160 [23827.548606] __sys_sendmsg+0xb7/0x140 [23827.549303] do_syscall_64+0x3a/0x70 [23827.549969] entry_SYSCALL_64_after_hwframe+0x44/0xae [23827.550853] [23827.551217] The buggy address belongs to the object at ffff8881d1322200 [23827.551217] which belongs to the cache kmalloc-256 of size 256 [23827.553341] The buggy address is located 140 bytes inside of [23827.553341] 256-byte region [ffff8881d1322200, ffff8881d1322300) [23827.555747] The buggy address belongs to the page: [23827.556847] page:00000000898762aa refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x1d1320 [23827.558651] head:00000000898762aa order:2 compound_mapcount:0 compound_pincount:0 [23827.559961] flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff) [23827.561243] raw: 002ffff800010200 dead000000000100 dead000000000122 ffff888100042b40 [23827.562653] raw: 0000000000000000 0000000000200020 00000001ffffffff 0000000000000000 [23827.564112] page dumped because: kasan: bad access detected [23827.565439] [23827.565932] Memory state around the buggy address: [23827.566917] ffff8881d1322180: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.568485] ffff8881d1322200: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [23827.569818] >ffff8881d1322280: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [23827.571143] ^ [23827.571879] ffff8881d1322300: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.573283] ffff8881d1322380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [23827.574654] ================================================================== Most of the necessary logic is already correctly implemented by mlx5e_get_next_valid_encap() helper that is used in neigh stats update handler. Make the handler generic by renaming it to mlx5e_get_next_matching_encap() and use callback to test whether flow is matching instead of hardcoded check for 'valid' flag value. Implement mlx5e_get_next_valid_encap() by calling mlx5e_get_next_matching_encap() with callback that tests encap MLX5_ENCAP_ENTRY_VALID flag. Implement new mlx5e_get_next_init_encap() helper by calling mlx5e_get_next_matching_encap() with callback that tests encap completion result to be non-error and use it in mlx5e_rep_neigh_update() to safely iterate over nhe->encap_list. Remove encap completion logic from mlx5e_rep_update_flows() since the encap entries passed to this function are already guaranteed to be properly initialized by similar code in mlx5e_get_next_init_encap(). Fixes: 2a1f1768 ("net/mlx5e: Refactor neigh update for concurrent execution") Signed-off-by:
Vlad Buslov <vladbu@nvidia.com> Reviewed-by:
Roi Dayan <roid@nvidia.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
Yang Li authored
When the code execute 'if (!priv->fs.arfs->wq)', the value of err is 0. So, we use -ENOMEM to indicate that the function create_singlethread_workqueue() return NULL. Clean up smatch warning: drivers/net/ethernet/mellanox/mlx5/core/en_arfs.c:373 mlx5e_arfs_create_tables() warn: missing error code 'err'. Reported-by:
Abaci Robot <abaci@linux.alibaba.com> Fixes: f6755b80 ("net/mlx5e: Dynamic alloc arfs table for netdev when needed") Signed-off-by:
Yang Li <yang.lee@linux.alibaba.com> Signed-off-by:
Saeed Mahameed <saeedm@nvidia.com>
-
- 09 Jun, 2021 12 commits
-
-
Marcelo Ricardo Leitner authored
This this the counterpart of 8aa7b526 ("openvswitch: handle DNAT tuple collision") for act_ct. From that commit changelog: """ With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. ... Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. """ Fixes: 95219afb ("act_ct: support asymmetric conntrack") Signed-off-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
Cited commit started returning errors when notification info is not filled by the bridge driver, resulting in the following regression: # ip link add name br1 type bridge vlan_filtering 1 # bridge vlan add dev br1 vid 555 self pvid untagged RTNETLINK answers: Invalid argument As long as the bridge driver does not fill notification info for the bridge device itself, an empty notification should not be considered as an error. This is explained in commit 59ccaaaa ("bridge: dont send notification when skb->len == 0 in rtnl_bridge_notify"). Fix by removing the error and add a comment to avoid future bugs. Fixes: a8db57c1 ("rtnetlink: Fix missing error code in rtnl_bridge_notify()") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Reviewed-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge tag 'mac80211-for-net-2021-06-09' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes berg says: ==================== A fair number of fixes: * fix more fallout from RTNL locking changes * fixes for some of the bugs found by syzbot * drop multicast fragments in mac80211 to align with the spec and what drivers are doing now * fix NULL-ptr deref in radiotap injection ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Kaustubh reported and diagnosed a panic in udp_lib_lookup(). The root cause is udp_abort() racing with close(). Both racing functions acquire the socket lock, but udp{v6}_destroy_sock() release it before performing destructive actions. We can't easily extend the socket lock scope to avoid the race, instead use the SOCK_DEAD flag to prevent udp_abort from doing any action when the critical race happens. Diagnosed-and-tested-by:
Kaustubh Pandey <kapandey@codeaurora.org> Fixes: 5d77dca8 ("net: diag: support SOCK_DESTROY for UDP sockets") Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Eric Dumazet authored
Both functions are known to be racy when reading inet_num as we do not want to grab locks for the common case the socket has been bound already. The race is resolved in inet_autobind() by reading again inet_num under the socket lock. syzbot reported: BUG: KCSAN: data-race in inet_send_prepare / udp_lib_get_port write to 0xffff88812cba150e of 2 bytes by task 24135 on cpu 0: udp_lib_get_port+0x4b2/0xe20 net/ipv4/udp.c:308 udp_v6_get_port+0x5e/0x70 net/ipv6/udp.c:89 inet_autobind net/ipv4/af_inet.c:183 [inline] inet_send_prepare+0xd0/0x210 net/ipv4/af_inet.c:807 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88812cba150e of 2 bytes by task 24132 on cpu 1: inet_send_prepare+0x21/0x210 net/ipv4/af_inet.c:806 inet6_sendmsg+0x29/0x80 net/ipv6/af_inet6.c:639 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x0000 -> 0x9db4 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 24132 Comm: syz-executor.2 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
Eric Dumazet <edumazet@google.com> Reported-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Austin Kim authored
Several ethtool functions leave heap uncleared (potentially) by drivers. This will leave the unused portion of heap unchanged and might copy the full contents back to userspace. Signed-off-by:
Austin Kim <austindh.kim@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
These are not permitted by the spec, just drop them. Link: https://lore.kernel.org/r/20210609161305.23def022b750.Ibd6dd3cdce573dae262fcdc47f8ac52b883a9c50@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When reconfiguration fails, we shut down everything, but we cannot call cfg80211_shutdown_all_interfaces() with the wiphy mutex held. Since cfg80211 now calls it on resume errors, we only need to do likewise for where we call reconfig (whether directly or indirectly), but not under the wiphy lock. Cc: stable@vger.kernel.org Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.78233c80f548.Iecc104aceb89f0568f50e9670a9cb191a1c8887b@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
If resume fails, we should shut down all interfaces as the hardware is probably dead. This was/is already done now in mac80211, but we need to change that due to locking issues, so move it here and do it without the wiphy lock held. Cc: stable@vger.kernel.org Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.d564ca69de7c.I2e3c3e5d410b72a4f63bade4fb075df041b3d92f@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
When I moved around the code here, I neglected that we could still call register_netdev() or similar without the wiphy mutex held, which then calls cfg80211_register_wdev() - that's also done from cfg80211_register_netdevice(), but the phy80211 symlink creation was only there. Now, the symlink isn't needed for a *pure* wdev, but a netdev not registered via cfg80211_register_wdev() should still have the symlink, so move the creation to the right place. Cc: stable@vger.kernel.org Fixes: 2fe8ef10 ("cfg80211: change netdev registration/unregistration semantics") Link: https://lore.kernel.org/r/20210608113226.a5dc4c1e488c.Ia42fe663cefe47b0883af78c98f284c5555bbe5d@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Johannes Berg authored
cfg80211 now calls suspend/resume with the wiphy lock held, and while there's a problem with that needing to be fixed, we should do the same in debugfs. Cc: stable@vger.kernel.org Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210608113226.14020430e449.I78e19db0a55a8295a376e15ac4cf77dbb4c6fb51@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Aleksander Jan Bajkowski authored
This patch fixes TX hangs with threaded NAPI enabled. The scheduled NAPI seems to be executed in parallel with the interrupt on second thread. Sometimes it happens that ltq_dma_disable_irq() is executed after xrx200_tx_housekeeping(). The symptom is that TX interrupts are disabled in the DMA controller. As a result, the TX hangs after a few seconds of the iperf test. Scheduling NAPI after disabling interrupts fixes this issue. Tested on Lantiq xRX200 (BT Home Hub 5A). Fixes: 9423361d ("net: lantiq: Disable IRQs only if NAPI gets scheduled ") Signed-off-by:
Aleksander Jan Bajkowski <olek2@wp.pl> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 08 Jun, 2021 9 commits
-
-
Shay Agroskin authored
This patch fixes several bugs found when (DMA/LLQ) mapping a packet for transmission. The mapping procedure makes the transmitted packet accessible by the device. When using LLQ, this requires copying the packet's header to push header (which would be passed to LLQ) and creating DMA mapping for the payload (if the packet doesn't fit the maximum push length). When not using LLQ, we map the whole packet with DMA. The following bugs are fixed in the code: 1. Add support for non-LLQ machines: The ena_xdp_tx_map_frame() function assumed that LLQ is supported, and never mapped the whole packet using DMA. On some instances, which don't support LLQ, this causes loss of traffic. 2. Wrong DMA buffer length passed to device: When using LLQ, the first 'tx_max_header_size' bytes of the packet would be copied to push header. The rest of the packet would be copied to a DMA'd buffer. 3. Freeing the XDP buffer twice in case of a mapping error: In case a buffer DMA mapping fails, the function uses xdp_return_frame_rx_napi() to free the RX buffer and returns from the function with an error. XDP frames that fail to xmit get freed by the kernel and so there is no need for this call. Fixes: 548c4940 ("net: ena: Implement XDP_TX action") Signed-off-by:
Shay Agroskin <shayagr@amazon.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
Because flow control is set up statically in ocelot_init_port(), and not in phylink_mac_link_up(), what happens is that after the blamed commit, the flow control remains disabled after the port flushing procedure. Fixes: eb4733d7 ("net: dsa: felix: implement port flushing on .phylink_mac_link_down") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
Syzbot reported memory leak in rds. The problem was in unputted refcount in case of error. int rds_recvmsg(struct socket *sock, struct msghdr *msg, size_t size, int msg_flags) { ... if (!rds_next_incoming(rs, &inc)) { ... } After this "if" inc refcount incremented and if (rds_cmsg_recv(inc, msg, rs)) { ret = -EFAULT; goto out; } ... out: return ret; } in case of rds_cmsg_recv() fail the refcount won't be decremented. And it's easy to see from ftrace log, that rds_inc_addref() don't have rds_inc_put() pair in rds_recvmsg() after rds_cmsg_recv() 1) | rds_recvmsg() { 1) 3.721 us | rds_inc_addref(); 1) 3.853 us | rds_message_inc_copy_to_user(); 1) + 10.395 us | rds_cmsg_recv(); 1) + 34.260 us | } Fixes: bdbe6fbc ("RDS: recv.c") Reported-and-tested-by: syzbot+5134cdf021c4ed5aaa5f@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Håkon Bugge <haakon.bugge@oracle.com> Acked-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.open-mesh.org/linux-mergeDavid S. Miller authored
Simon Wunderlich says: ==================== Here is a batman-adv bugfix: - Avoid WARN_ON timing related checks, by Sven Eckelmann ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nicolas Dichtel authored
My initial goal was to fix the default MTU, which is set to 65536, ie above the maximum defined in the driver: 65535 (ETH_MAX_MTU). In fact, it's seems more consistent, wrt min_mtu, to set the max_mtu to IP6_MAX_MTU (65535 + sizeof(struct ipv6hdr)) and use it by default. Let's also, for consistency, set the mtu in vrf_setup(). This function calls ether_setup(), which set the mtu to 1500. Thus, the whole mtu config is done in the same function. Before the patch: $ ip link add blue type vrf table 1234 $ ip link list blue 9: blue: <NOARP,MASTER> mtu 65536 qdisc noop state DOWN mode DEFAULT group default qlen 1000 link/ether fa:f5:27:70:24:2a brd ff:ff:ff:ff:ff:ff $ ip link set dev blue mtu 65535 $ ip link set dev blue mtu 65536 Error: mtu greater than device maximum. Fixes: 5055376a ("net: vrf: Fix ping failed when vrf mtu is set to 0") CC: Miaohe Lin <linmiaohe@huawei.com> Signed-off-by:
Nicolas Dichtel <nicolas.dichtel@6wind.com> Reviewed-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
gushengxian authored
The preposition "for" should be changed to preposition "of". Signed-off-by:
gushengxian <gushengxian@yulong.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Zheng Yongjun authored
When 'nla_parse_nested_deprecated' failed, it's no need to BUG() here, return -EINVAL is ok. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Nanyong Sun authored
Reported by syzkaller: BUG: memory leak unreferenced object 0xffff888105df7000 (size 64): comm "syz-executor842", pid 360, jiffies 4294824824 (age 22.546s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<00000000e67ed558>] kmalloc include/linux/slab.h:590 [inline] [<00000000e67ed558>] kzalloc include/linux/slab.h:720 [inline] [<00000000e67ed558>] netlbl_cipsov4_add_std net/netlabel/netlabel_cipso_v4.c:145 [inline] [<00000000e67ed558>] netlbl_cipsov4_add+0x390/0x2340 net/netlabel/netlabel_cipso_v4.c:416 [<0000000006040154>] genl_family_rcv_msg_doit.isra.0+0x20e/0x320 net/netlink/genetlink.c:739 [<00000000204d7a1c>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<00000000204d7a1c>] genl_rcv_msg+0x2bf/0x4f0 net/netlink/genetlink.c:800 [<00000000c0d6a995>] netlink_rcv_skb+0x134/0x3d0 net/netlink/af_netlink.c:2504 [<00000000d78b9d2c>] genl_rcv+0x24/0x40 net/netlink/genetlink.c:811 [<000000009733081b>] netlink_unicast_kernel net/netlink/af_netlink.c:1314 [inline] [<000000009733081b>] netlink_unicast+0x4a0/0x6a0 net/netlink/af_netlink.c:1340 [<00000000d5fd43b8>] netlink_sendmsg+0x789/0xc70 net/netlink/af_netlink.c:1929 [<000000000a2d1e40>] sock_sendmsg_nosec net/socket.c:654 [inline] [<000000000a2d1e40>] sock_sendmsg+0x139/0x170 net/socket.c:674 [<00000000321d1969>] ____sys_sendmsg+0x658/0x7d0 net/socket.c:2350 [<00000000964e16bc>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2404 [<000000001615e288>] __sys_sendmsg+0xd3/0x190 net/socket.c:2433 [<000000004ee8b6a5>] do_syscall_64+0x37/0x90 arch/x86/entry/common.c:47 [<00000000171c7cee>] entry_SYSCALL_64_after_hwframe+0x44/0xae The memory of doi_def->map.std pointing is allocated in netlbl_cipsov4_add_std, but no place has freed it. It should be freed in cipso_v4_doi_free which frees the cipso DOI resource. Fixes: 96cb8e33 ("[NetLabel]: CIPSOv4 and Unlabeled packet integration") Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Nanyong Sun <sunnanyong@huawei.com> Acked-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Johannes Berg authored
Syzbot reports that when you have AP_VLAN interfaces that are up and close the AP interface they belong to, we get a deadlock. No surprise - since we dev_close() them with the wiphy mutex held, which goes back into the netdev notifier in cfg80211 and tries to acquire the wiphy mutex there. To fix this, we need to do two things: 1) prevent changing iftype while AP_VLANs are up, we can't easily fix this case since cfg80211 already calls us with the wiphy mutex held, but change_interface() is relatively rare in drivers anyway, so changing iftype isn't used much (and userspace has to fall back to down/change/up anyway) 2) pull the dev_close() loop over VLANs out of the wiphy mutex section in the normal stop case Cc: stable@vger.kernel.org Reported-by: syzbot+452ea4fbbef700ff0a56@syzkaller.appspotmail.com Fixes: a05829a7 ("cfg80211: avoid holding the RTNL when calling the driver") Link: https://lore.kernel.org/r/20210517160322.9b8f356c0222.I392cb0e2fa5a1a94cf2e637555d702c7e512c1ff@changeidSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
- 07 Jun, 2021 7 commits
-
-
David Ahern authored
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to fill up the neighbour table with enough entries that it will overflow for valid connections after that. This behaviour is more prevalent after commit 58956317 ("neighbor: Improve garbage collection") is applied, as it prevents removal from entries that are not NUD_FAILED, unless they are more than 5s old. Fixes: 58956317 (neighbor: Improve garbage collection) Reported-by:
Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net> Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pavel Skripkin authored
In commit c47cc304 ("net: kcm: fix memory leak in kcm_sendmsg") I misunderstood the root case of the memory leak and came up with completely broken fix. So, simply revert this commit to avoid GPF reported by syzbot. Im so sorry for this situation. Fixes: c47cc304 ("net: kcm: fix memory leak in kcm_sendmsg") Reported-by: syzbot+65badd5e74ec62cb67dc@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Merge branch 'mlxsw-fixes' Ido Schimmel says: ==================== mlxsw: Thermal and qdisc fixes Patches #1-#2 fix wrong validation of burst size in qdisc code and a user triggerable WARN_ON(). Patch #3 fixes a regression in thermal monitoring of transceiver modules and gearboxes. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Mykola Kostenok authored
Thermal polling delay argument for modules and gearboxes thermal zones used to be initialized with zero value, while actual delay was used to be set by mlxsw_thermal_set_mode() by thermal operation callback set_mode(). After operations set_mode()/get_mode() have been removed by cited commits, modules and gearboxes thermal zones always have polling time set to zero and do not perform temperature monitoring. Set non-zero "polling_delay" in thermal_zone_device_register() routine, thus, the relevant thermal zones will perform thermal monitoring. Cc: Andrzej Pietrasiewicz <andrzej.p@collabora.com> Fixes: 5d7bd8aa ("thermal: Simplify or eliminate unnecessary set_mode() methods") Fixes: 1ee14820 ("thermal: remove get_mode() operation of drivers") Signed-off-by:
Mykola Kostenok <c_mykolak@nvidia.com> Acked-by:
Vadim Pasternak <vadimp@nvidia.com> Reviewed-by:
Jiri Pirko <jiri@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
In mlxsw Qdisc offload, find_class() is an operation that yields a qdisc offload descriptor given a parental qdisc descriptor and a class handle. In __mlxsw_sp_qdisc_ets_graft() however, a band number is passed to that function instead of a handle. This can lead to a trigger of a WARN_ON with the following splat: WARNING: CPU: 3 PID: 808 at drivers/net/ethernet/mellanox/mlxsw/spectrum_qdisc.c:1356 __mlxsw_sp_qdisc_ets_graft+0x115/0x130 [mlxsw_spectrum] [...] Call Trace: mlxsw_sp_setup_tc_prio+0xe3/0x100 [mlxsw_spectrum] qdisc_offload_graft_helper+0x35/0xa0 prio_graft+0x176/0x290 [sch_prio] qdisc_graft+0xb3/0x540 tc_modify_qdisc+0x56a/0x8a0 rtnetlink_rcv_msg+0x12c/0x370 netlink_rcv_skb+0x49/0xf0 netlink_unicast+0x1f6/0x2b0 netlink_sendmsg+0x1fb/0x410 ____sys_sendmsg+0x1f3/0x220 ___sys_sendmsg+0x70/0xb0 __sys_sendmsg+0x54/0xa0 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Since the parent handle is not passed with the offload information, compute it from the band number and qdisc handle. Fixes: 28052e618b04 ("mlxsw: spectrum_qdisc: Track children per qdisc") Reported-by:
Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Petr Machata authored
A max-shaper is the HW component responsible for delaying egress traffic above a configured transmission rate. Burst size is the amount of traffic that is allowed to pass without accounting. The burst size value needs to be such that it can be expressed as 2^BS * 512 bits, where BS lies in a certain ASIC-dependent range. mlxsw enforces that this holds before attempting to configure the shaper. The assumption for Spectrum-3 was that the lower limit of BS would be 5, like for Spectrum-1. But as of now, the limit is still 11. Therefore fix the driver accordingly, so that incorrect values are rejected early with a proper message. Fixes: 23effa24 ("mlxsw: reg: Add max_shaper_bs to QoS ETS Element Configuration") Reported-by:
Maksym Yaremchuk <maksymy@nvidia.com> Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Ido Schimmel authored
When get_module_eeprom_by_page() is not implemented by the driver, NULL pointer dereference can occur [1]. Fix by testing if get_module_eeprom_by_page() is implemented instead of get_module_info(). [1] BUG: kernel NULL pointer dereference, address: 0000000000000000 [...] CPU: 0 PID: 251 Comm: ethtool Not tainted 5.13.0-rc3-custom-00940-g3822d067 #989 Call Trace: eeprom_prepare_data+0x101/0x2d0 ethnl_default_doit+0xc2/0x290 genl_family_rcv_msg_doit+0xdc/0x140 genl_rcv_msg+0xd7/0x1d0 netlink_rcv_skb+0x49/0xf0 genl_rcv+0x1f/0x30 netlink_unicast+0x1f6/0x2c0 netlink_sendmsg+0x1f9/0x400 __sys_sendto+0xe1/0x130 __x64_sys_sendto+0x1b/0x20 do_syscall_64+0x3a/0x70 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c97a31f6 ("ethtool: wire in generic SFP module access") Signed-off-by:
Ido Schimmel <idosch@nvidia.com> Acked-by:
Moshe Shemesh <moshe@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 04 Jun, 2021 10 commits
-
-
Rahul Lakkireddy authored
When configuring TC-MQPRIO offload, only turn off netdev carrier and don't bring physical link down in hardware. Otherwise, when the physical link is brought up again after configuration, it gets re-trained and stalls ongoing traffic. Also, when firmware is no longer accessible or crashed, avoid sending FLOWC and waiting for reply that will never come. Fix following hung_task_timeout_secs trace seen in these cases. INFO: task tc:20807 blocked for more than 122 seconds. Tainted: G S 5.13.0-rc3+ #122 "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. task:tc state:D stack:14768 pid:20807 ppid: 19366 flags:0x00000000 Call Trace: __schedule+0x27b/0x6a0 schedule+0x37/0xa0 schedule_preempt_disabled+0x5/0x10 __mutex_lock.isra.14+0x2a0/0x4a0 ? netlink_lookup+0x120/0x1a0 ? rtnl_fill_ifinfo+0x10f0/0x10f0 __netlink_dump_start+0x70/0x250 rtnetlink_rcv_msg+0x28b/0x380 ? rtnl_fill_ifinfo+0x10f0/0x10f0 ? rtnl_calcit.isra.42+0x120/0x120 netlink_rcv_skb+0x4b/0xf0 netlink_unicast+0x1a0/0x280 netlink_sendmsg+0x216/0x440 sock_sendmsg+0x56/0x60 __sys_sendto+0xe9/0x150 ? handle_mm_fault+0x6d/0x1b0 ? do_user_addr_fault+0x1c5/0x620 __x64_sys_sendto+0x1f/0x30 do_syscall_64+0x3c/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f7f73218321 RSP: 002b:00007ffd19626208 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 000055b7c0a8b240 RCX: 00007f7f73218321 RDX: 0000000000000028 RSI: 00007ffd19626210 RDI: 0000000000000003 RBP: 000055b7c08680ff R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000055b7c085f5f6 R13: 000055b7c085f60a R14: 00007ffd19636470 R15: 00007ffd196262a0 Fixes: b1396c2b ("cxgb4: parse and configure TC-MQPRIO offload") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Yunjian Wang authored
The commit ae81feb7 ("sch_htb: fix null pointer dereference on a null new_q") fixes a NULL pointer dereference bug, but it is not correct. Because htb_graft_helper properly handles the case when new_q is NULL, and after the previous patch by skipping this call which creates an inconsistency : dev_queue->qdisc will still point to the old qdisc, but cl->parent->leaf.q will point to the new one (which will be noop_qdisc, because new_q was NULL). The code is based on an assumption that these two pointers are the same, so it can lead to refcount leaks. The correct fix is to add a NULL pointer check to protect qdisc_refcount_inc inside htb_parent_to_leaf_offload. Fixes: ae81feb7 ("sch_htb: fix null pointer dereference on a null new_q") Signed-off-by:
Yunjian Wang <wangyunjian@huawei.com> Suggested-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queueDavid S. Miller authored
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2021-06-04 This series contains updates to virtchnl header file and ice driver. Brett fixes VF being unable to request a different number of queues then allocated and adds clearing of VF_MBX_ATQLEN register for VF reset. Haiyue handles error of rebuilding VF VSI during reset. Paul fixes reporting of autoneg to use the PHY capabilities. Dave allows LLDP packets without priority of TC_PRIO_CONTROL to be transmitted. Geert Uytterhoeven adds explicit padding to virtchnl_proto_hdrs structure in the virtchnl header file. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Jason A. Donenfeld says: ==================== wireguard fixes for 5.13-rc5 Here are bug fixes to WireGuard for 5.13-rc5: 1-2,6) These are small, trivial tweaks to our test harness. 3) Linus thinks -O3 is still dangerous to enable. The code gen wasn't so much different with -O2 either. 4) We were accidentally calling synchronize_rcu instead of synchronize_net while holding the rtnl_lock, resulting in some rather large stalls that hit production machines. 5) Peer allocation was wasting literally hundreds of megabytes on real world deployments, due to oddly sized large objects not fitting nicely into a kmalloc slab. 7-9) We move from an insanely expensive O(n) algorithm to a fast O(1) algorithm, and cleanup a massive memory leak in the process, in which allowed ips churn would leave danging nodes hanging around without cleanup until the interface was removed. The O(1) algorithm eliminates packet stalls and high latency issues, in addition to bringing operations that took as much as 10 minutes down to less than a second. ==================== Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
When removing single nodes, it's possible that that node's parent is an empty intermediate node, in which case, it too should be removed. Otherwise the trie fills up and never is fully emptied, leading to gradual memory leaks over time for tries that are modified often. There was originally code to do this, but was removed during refactoring in 2016 and never reworked. Now that we have proper parent pointers from the previous commits, we can implement this properly. In order to reduce branching and expensive comparisons, we want to keep the double pointer for parent assignment (which lets us easily chain up to the root), but we still need to actually get the parent's base address. So encode the bit number into the last two bits of the pointer, and pack and unpack it as needed. This is a little bit clumsy but is the fastest and less memory wasteful of the compromises. Note that we align the root struct here to a minimum of 4, because it's embedded into a larger struct, and we're relying on having the bottom two bits for our flag, which would only be 16-bit aligned on m68k. The existing macro-based helpers were a bit unwieldy for adding the bit packing to, so this commit replaces them with safer and clearer ordinary functions. We add a test to the randomized/fuzzer part of the selftests, to free the randomized tries by-peer, refuzz it, and repeat, until it's supposed to be empty, and then then see if that actually resulted in the whole thing being emptied. That combined with kmemcheck should hopefully make sure this commit is doing what it should. Along the way this resulted in various other cleanups of the tests and fixes for recent graphviz. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
The previous commit moved from O(n) to O(1) for removal, but in the process introduced an additional pointer member to a struct that increased the size from 60 to 68 bytes, putting nodes in the 128-byte slab. With deployed systems having as many as 2 million nodes, this represents a significant doubling in memory usage (128 MiB -> 256 MiB). Fix this by using our own kmem_cache, that's sized exactly right. This also makes wireguard's memory usage more transparent in tools like slabtop and /proc/slabinfo. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Previously, deleting peers would require traversing the entire trie in order to rebalance nodes and safely free them. This meant that removing 1000 peers from a trie with a half million nodes would take an extremely long time, during which we're holding the rtnl lock. Large-scale users were reporting 200ms latencies added to the networking stack as a whole every time their userspace software would queue up significant removals. That's a serious situation. This commit fixes that by maintaining a double pointer to the parent's bit pointer for each node, and then using the already existing node list belonging to each peer to go directly to the node, fix up its pointers, and free it with RCU. This means removal is O(1) instead of O(n), and we don't use gobs of stack. The removal algorithm has the same downside as the code that it fixes: it won't collapse needlessly long runs of fillers. We can enhance that in the future if it ever becomes a problem. This commit documents that limitation with a TODO comment in code, a small but meaningful improvement over the prior situation. Currently the biggest flaw, which the next commit addresses, is that because this increases the node size on 64-bit machines from 60 bytes to 68 bytes. 60 rounds up to 64, but 68 rounds up to 128. So we wind up using twice as much memory per node, because of power-of-two allocations, which is a big bummer. We'll need to figure something out there. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
The randomized trie tests weren't initializing the dummy peer list head, resulting in a NULL pointer dereference when used. Fix this by initializing it in the randomized trie test, just like we do for the static unit test. While we're at it, all of the other strings like this have the word "self-test", so add it to the missing place here. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
With deployments having upwards of 600k peers now, this somewhat heavy structure could benefit from more fine-grained allocations. Specifically, instead of using a 2048-byte slab for a 1544-byte object, we can now use 1544-byte objects directly, thus saving almost 25% per-peer, or with 600k peers, that's a savings of 303 MiB. This also makes wireguard's memory usage more transparent in tools like slabtop and /proc/slabinfo. Fixes: 8b5553ac ("wireguard: queueing: get rid of per-peer ring buffers") Suggested-by:
Arnd Bergmann <arnd@arndb.de> Suggested-by:
Matthew Wilcox <willy@infradead.org> Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason A. Donenfeld authored
Many of the synchronization points are sometimes called under the rtnl lock, which means we should use synchronize_net rather than synchronize_rcu. Under the hood, this expands to using the expedited flavor of function in the event that rtnl is held, in order to not stall other concurrent changes. This fixes some very, very long delays when removing multiple peers at once, which would cause some operations to take several minutes. Fixes: e7096c13 ("net: WireGuard secure network tunnel") Cc: stable@vger.kernel.org Signed-off-by:
Jason A. Donenfeld <Jason@zx2c4.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-