- 25 Oct, 2012 6 commits
-
-
Johan Hovold authored
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the oob port is never registered as a port device and should thus be handled in attach and release. Compile-only tested. Cc: Peter Berger <pberger@brimson.com> Cc: Al Borchers <alborchers@steinerpoint.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Fix port-data memory leak by moving port data allocation to port_probe and actually implementing deallocation. Note that this driver has never even bothered to try to deallocate it's port data... Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the fifth port (command port) is never registered as a port device and thus should be handled in attach and release. Compile-only tested. Cc: <support@connecttech.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Make sure command buffer is deallocated in case of errors during attach. Cc: <support@connecttech.com> Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Make sure no control urb is submitted during close after a disconnect by checking the disconnected flag. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
Fix port-data memory leak by moving port data allocation and deallocation to port_probe and port_remove. Since commit 0998d063 (device-core: Ensure drvdata = NULL when no driver is bound) the port private data is no longer freed at release as it is no longer accessible. Note that the call to metrousb_clean (close) in shutdown was redundant. Compile-only tested. Cc: <stable@vger.kernel.org> Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 24 Oct, 2012 6 commits
-
-
Michael Shigorin authored
This commit sets removable subclass for Casio EX-N1 digital camera. The patch has been tested within an ALT Linux kernel: http://git.altlinux.org/people/led/packages/?p=kernel-image-3.0.git;a=commitdiff;h=c0fd891836e89fe0c93a4d536a59216d90e4e3e7 See also https://bugzilla.kernel.org/show_bug.cgi?id=49221Signed-off-by: Oleksandr Chumachenko <ledest@gmail.com> Signed-off-by: Michael Shigorin <mike@osdn.org.ua> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Lennart Sorensen authored
I found a memory leak in sierra_release() (well sierra_probe() I guess) that looses 8 bytes each time the driver releases a device. Signed-off-by: Len Sorensen <lsorense@csclub.uwaterloo.ca> Acked-by: Johan Hovold <jhovold@gmail.com> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Octavian Purdila authored
flush_work_sync and flush_work are now the same and flush_work_sync has been deprecated. This fixes the following warning: drivers/usb/core/hub.c: In function hub_quiesce: drivers/usb/core/hub.c:1216:3: warning: flush_work_sync is deprecated (declared at include/linux/workqueue.h:448) [-Wdeprecated-declarations] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Jones authored
ezusb: module license 'unspecified' taints kernel Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Greg Kroah-Hartman authored
Merge tag 'for-usb-linus-2012-10-23' of git://git.kernel.org/pub/scm/linux/kernel/git/sarah/xhci into usb-linus xHCI fixes for 3.7-rc3 Hi Greg, Here's four bug fixes for 3.7. The first patch fixes a potential deadlock in the USB port power off code, and the last two patches fix bugs in the USB 3.0 Link PM patchset. The second one is trivial and removes an unnecessary cast. Sarah Sharp
-
Greg Kroah-Hartman authored
Merge tag 'fixes-for-v3.7-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-linus usb: fixes for v3.7-rc3 Here's a new set of fixes for v3.7-rc3. It's quite small, only four patches. There's one bug fix for the newly added musb-dsps glue layer where we could be overflowing a buffer when creating the instance name. NET2272 got a fix for a case where the lock would be left held when exiting the IRQ handler with error in case of Spurious IRQs. Renensas USBHS got a DMA stall fix which would cause transfers to stall forever and a NULL pointer deref fix in case of pipe detach.
-
- 23 Oct, 2012 6 commits
-
-
Oliver Neukum authored
xhci_service_interval_to_ns() returns long long to avoid an overflow. However, the type cast happens too late. The fix is to force ULL from the beginning. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable@vger.kernel.org
-
Oliver Neukum authored
An le16 is accessed without conversion. This patch should be backported to kernels as old as 3.5, that contain the commit e3567d2c "xhci: Add Intel U1/U2 timeout policy." Signed-off-by: Oliver Neukum <oneukum@suse.de> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> CC: stable@vger.kernel.org
-
Kuninori Morimoto authored
renesas_usbhs driver can switch DMA/PIO transfer by using handler, and each handler have push/pop direction. But unfortunately, current dma push handler didn't a path which calls usbhs_pipe_enable(). Thus, dma transfer never happened. this patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Kuninori Morimoto authored
If renesas_usbhs or DMAEngine interrupt didn't happen by a certain cause, urb->ep will be NULL by usb time out. Then, host mode will access to it and crash kernel. This patch fixes it. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Wei Yongjun authored
Add the missing unlock on the error handle path in function net2272_irq(). Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
Daniel Mack authored
The res_name is used for the name construction of a DT property as follows: sprintf(res_name, "port%d-mode", id); Hence, res_name must be at least 11 characters long in order to store the name including the terminating '\0'. While at it, use to snprintf() rather than sprintf() when accessing this buffer. Reported-by: David Binderman <dcb314@hotmail.com> Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
-
- 22 Oct, 2012 3 commits
-
-
Lan Tianyu authored
Struct usb_hub_descriptor.ss.DeviceRemovable has been defined as __le16 and (__force__ __u16) doesn't need. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
-
Lan Tianyu authored
usb/xhci: release xhci->lock during turning on/off usb port's acpi power resource and checking the existence of port's power resource When setting usb port's acpi power resource, there will be some xhci hub requests. This will cause dead lock since xhci->lock has been held before setting acpi power resource in the xhci_hub_control(). The usb_acpi_power_manageable() function might fall into sleep so release xhci->lock before invoking it. Signed-off-by: Lan Tianyu <tianyu.lan@intel.com> Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
-
Octavian Purdila authored
There is a race condition in the USB hub code with regard to handling TT clear requests that can get the HCD driver in a deadlock. Usually when an TT clear request is scheduled it will be executed immediately: <7>[ 6.077583] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 6.078041] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 6.078299] hub_tt_work:731 <7>[ 9.309089] usb 2-1.5: link qh1-0e01/f4d506c0 start 0 [1/2 us] <7>[ 9.324526] ehci_hcd 0000:00:1d.0: reused qh f4d4db00 schedule <7>[ 9.324539] usb 2-1.3: link qh1-0e01/f4d4db00 start 0 [1/2 us] <7>[ 9.341530] usb 1-1.1: link qh4-0e01/f397aec0 start 2 [1/2 us] <7>[ 10.116159] usb 2-1.3: unlink qh1-0e01/f4d4db00 start 0 [1/2 us] <3>[ 10.116459] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d82 <7>[ 10.116537] hub_tt_work:731 However, if a suspend operation is triggered before hub_tt_work is scheduled, hub_quiesce will cancel the work without notifying the HCD driver: <3>[ 35.033941] usb 2-1: clear tt buffer port 3, a3 ep2 t04048d80 <5>[ 35.034022] sd 0:0:0:0: [sda] Stopping disk <7>[ 35.034039] hub 2-1:1.0: hub_suspend <7>[ 35.034067] usb 2-1: unlink qh256-0001/f3b1ab00 start 1 [1/0 us] <7>[ 35.035085] hub 1-0:1.0: hub_suspend <7>[ 35.035102] usb usb1: bus suspend, wakeup 0 <7>[ 35.035106] ehci_hcd 0000:00:1a.0: suspend root hub <7>[ 35.035298] hub 2-0:1.0: hub_suspend <7>[ 35.035313] usb usb2: bus suspend, wakeup 0 <7>[ 35.035315] ehci_hcd 0000:00:1d.0: suspend root hub <6>[ 35.250017] PM: suspend of devices complete after 216.979 msecs <6>[ 35.250822] PM: late suspend of devices complete after 0.799 msecs <7>[ 35.252343] ehci_hcd 0000:00:1d.0: wakeup: 1 <7>[ 35.262923] ehci_hcd 0000:00:1d.0: --> PCI D3hot <7>[ 35.263302] ehci_hcd 0000:00:1a.0: wakeup: 1 <7>[ 35.273912] ehci_hcd 0000:00:1a.0: --> PCI D3hot <6>[ 35.274254] PM: noirq suspend of devices complete after 23.442 msecs <6>[ 35.274975] ACPI: Preparing to enter system sleep state S3 <6>[ 35.292666] PM: Saving platform NVS memory <7>[ 35.295030] Disabling non-boot CPUs ... <6>[ 35.297351] CPU 1 is now offline <6>[ 35.300345] CPU 2 is now offline <6>[ 35.303929] CPU 3 is now offline <7>[ 35.303931] lockdep: fixing up alternatives. <6>[ 35.304825] Extended CMOS year: 2000 When the device will resume the EHCI driver will get stuck in ehci_endpoint_disable waiting for the tt_clearing flag to reset: <0>[ 47.610967] usb 2-1.3: **** DPM device timeout **** <7>[ 47.610972] f2f11c60 00000092 f2f11c0c c10624a5 00000003 f4c6e880 c1c8a4c0 c1c8a4c0 <7>[ 47.610983] 15c55698 0000000b f56b34c0 f2a45b70 f4c6e880 00000082 f2a4602c f2f11c30 <7>[ 47.610993] c10787f8 f4cac000 f2a45b70 00000000 f4cac010 f2f11c58 00000046 00000001 <7>[ 47.611004] Call Trace: <7>[ 47.611006] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611019] [<c10787f8>] ? lock_release_holdtime.part.22+0x88/0xf0 <7>[ 47.611026] [<c103ed46>] ? lock_timer_base.isra.35+0x26/0x50 <7>[ 47.611034] [<c17592d3>] ? schedule_timeout+0x133/0x290 <7>[ 47.611044] [<c175b43e>] schedule+0x1e/0x50 <7>[ 47.611051] [<c17592d8>] schedule_timeout+0x138/0x290 <7>[ 47.611057] [<c10624a5>] ? sched_clock_cpu+0xf5/0x160 <7>[ 47.611063] [<c103e560>] ? usleep_range+0x40/0x40 <7>[ 47.611070] [<c1759445>] schedule_timeout_uninterruptible+0x15/0x20 <7>[ 47.611077] [<c14935f4>] ehci_endpoint_disable+0x64/0x160 <7>[ 47.611084] [<c147d1ee>] ? usb_hcd_flush_endpoint+0x10e/0x1d0 <7>[ 47.611092] [<c1165663>] ? sysfs_add_file+0x13/0x20 <7>[ 47.611100] [<c147d5a9>] usb_hcd_disable_endpoint+0x29/0x40 <7>[ 47.611107] [<c147fafc>] usb_disable_endpoint+0x5c/0x80 <7>[ 47.611111] [<c147fb57>] usb_disable_interface+0x37/0x50 <7>[ 47.611116] [<c1477650>] usb_reset_and_verify_device+0x4b0/0x640 <7>[ 47.611122] [<c1474665>] ? hub_port_status+0xb5/0x100 <7>[ 47.611129] [<c147a975>] usb_port_resume+0xd5/0x220 <7>[ 47.611136] [<c148877f>] generic_resume+0xf/0x30 <7>[ 47.611142] [<c14821a3>] usb_resume+0x133/0x180 <7>[ 47.611147] [<c1473b10>] ? usb_dev_thaw+0x10/0x10 <7>[ 47.611152] [<c1473b1d>] usb_dev_resume+0xd/0x10 <7>[ 47.611157] [<c13baa60>] dpm_run_callback+0x40/0xb0 <7>[ 47.611164] [<c13bdb03>] ? pm_runtime_enable+0x43/0x70 <7>[ 47.611171] [<c13bafc6>] device_resume+0x1a6/0x2c0 <7>[ 47.611177] [<c13ba940>] ? dpm_show_time+0xe0/0xe0 <7>[ 47.611183] [<c13bb0f9>] async_resume+0x19/0x40 <7>[ 47.611189] [<c10580c4>] async_run_entry_fn+0x64/0x160 <7>[ 47.611196] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611203] [<c104a24c>] ? process_one_work+0x10c/0x480 <7>[ 47.611209] [<c104a2c0>] process_one_work+0x180/0x480 <7>[ 47.611215] [<c104a244>] ? process_one_work+0x104/0x480 <7>[ 47.611220] [<c1058060>] ? async_schedule+0x10/0x10 <7>[ 47.611226] [<c104c15c>] worker_thread+0x11c/0x2f0 <7>[ 47.611233] [<c104c040>] ? manage_workers.isra.27+0x1f0/0x1f0 <7>[ 47.611239] [<c10507f8>] kthread+0x78/0x80 <7>[ 47.611244] [<c1750000>] ? timer_cpu_notify+0xd6/0x20d <7>[ 47.611253] [<c1050780>] ? __init_kthread_worker+0x60/0x60 <7>[ 47.611258] [<c176357e>] kernel_thread_helper+0x6/0xd <7>[ 47.611283] ------------[ cut here ]------------ This patch changes hub_quiesce behavior to flush the TT clear work instead of canceling it, to make sure that no TT clear request remains uncompleted before suspend. Signed-off-by: Octavian Purdila <octavian.purdila@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
- 20 Oct, 2012 9 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64Linus Torvalds authored
Pull arm64 fixes from Catalin Marinas: "Main changes: - AArch64 Linux compilation fixes following 3.7-rc1 changes (MODULES_USE_ELF_RELA, update_vsyscall() prototype) - Unnecessary register setting in start_thread() (thanks to Al Viro) - ptrace fixes" * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/linux-aarch64: arm64: fix alignment padding in assembly code arm64: ptrace: use HW_BREAKPOINT_EMPTY type for disabled breakpoints arm64: ptrace: make structure padding explicit for debug registers arm64: No need to set the x0-x2 registers in start_thread() arm64: Ignore memory blocks below PHYS_OFFSET arm64: Fix the update_vsyscall() prototype arm64: Select MODULES_USE_ELF_RELA arm64: Remove duplicate inclusion of mmu_context.h in smp.c
-
Marc Zyngier authored
An interesting effect of using the generic version of linkage.h is that the padding is defined in terms of x86 NOPs, which can have even more interesting effects when the assembly code looks like this: ENTRY(func1) mov x0, xzr ENDPROC(func1) // fall through ENTRY(func2) mov x0, #1 ret ENDPROC(func2) Admittedly, the code is not very nice. But having code from another architecture doesn't look completely sane either. The fix is to add arm64's version of linkage.h, which causes the insertion of proper AArch64 NOPs. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
-
Kees Cook authored
The min/max call needed to have explicit types on some architectures (e.g. mn10300). Use clamp_t instead to avoid the warning: kernel/sys.c: In function 'override_release': kernel/sys.c:1287:10: warning: comparison of distinct pointer types lacks a cast [enabled by default] Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Ingo Molnar: "Assorted small fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf python: Properly link with libtraceevent perf hists browser: Add back callchain folding symbol perf tools: Fix build on sparc. perf python: Link with libtraceevent perf python: Initialize 'page_size' variable tools lib traceevent: Fix missed freeing of subargs in free_arg() in filter lib tools traceevent: Add back pevent assignment in __pevent_parse_format() perf hists browser: Fix off-by-two bug on the first column perf tools: Remove warnings on JIT samples for srcline sort key perf tools: Fix segfault when using srcline sort key perf: Require exclude_guest to use PEBS - kernel side enforcement perf tool: Precise mode requires exclude_guest
-
Arnaldo Carvalho de Melo authored
Namhyung Kim reported that the build fails with: GEN python/perf.so gcc: error: python_ext_build/tmp//../../libtraceevent.a: No such file or directory error: command 'gcc' failed with exit status 1 cp: cannot stat `python_ext_build/lib/perf.so': No such file or directory make: *** [python/perf.so] Error 1 We need to propagate the TE_PATH variable to the setup.py file. Reported-by: Namhyung Kim <namhyung@kernel.org> Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Link: http://lkml.kernel.org/n/tip-8umiPbm4sxpknKivbjgykhut@git.kernel.org [ Fixed superfluous variable build error. ] Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
Ingo Molnar authored
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent Pull perf/urgent fixes from Arnaldo Carvalho de Melo: * The python binding needs to link with libtraceevent and to initialize the 'page_size' variable so that mmaping works again. * The callchain folding character that appears on the TUI just before the overhead had disappeared due to recent changes, add it back. * Intel PEBS in VT-x context uses the DS address as a guest linear address, even though its programmed by the host as a host linear address. This either results in guest memory corruption and or the hardware faulting and 'crashing' the virtual machine. Therefore we have to disable PEBS on VT-x enter and re-enable on VT-x exit, enforcing a strict exclude_guest. Kernel side enforcement fix by Peter Zijlstra, tooling side fix by David Ahern. * Fix build on sparc due to UAPI, fix from David Miller. * Fixes for the srclike sort key for unresolved symbols and when processing samples in JITted code, where we don't have an ELF file, just an special symbol table, fixes from Namhyung Kim. * Fix some leaks in libtraceevent, from Steven Rostedt. Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM soc fixes from Olof Johansson: "A set of fixes and some minor cleanups for -rc2: - A series from Arnd that fixes warnings in drivers and other code included by ARM defconfigs. Most have been acked by corresponding maintainers (and seem quite hard to argue not picking up anyway in the few exception cases). - A few misc patches from the list for integrator/vt8500/i.MX - A batch of fixes to OMAP platforms, fixing: - boot problems on beaglebone, - regression fixes for local timers - clockdomain locking fixes - a few boot/sparse warnings - For Tegra: - Clock rate calculation overflow fix - Revert a change that removed timer clocks and a fix for symbol name clashes - For Renesas: - IO accessor / annotation cleanups to remove warnings - For Kirkwood/Dove/mvebu: - Fixes for device trees for Dove (some minor cleanups, some fixes) - Fixes for the mvebu gpio driver - Fix build problem for Feroceon due to missing ifdefs - Fix lsxl DTS files" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (31 commits) ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2 gpio: mvebu: Add missing breaks in mvebu_gpio_irq_set_type ARM: dove: Add crypto engine to DT ARM: dove: Remove watchdog from DT ARM: dove: Restructure SoC device tree descriptor ARM: dove: Fix clock names of sata and gbe ARM: dove: Fix tauros2 device tree init ARM: dove: Add pcie clock support ARM: OMAP2+: Allow kernel to boot even if GPMC fails to reserve memory ARM: OMAP: clockdomain: Fix locking on _clkdm_clk_hwmod_enable / disable ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type ARM: OMAP4: devices: fixup OMAP4 DMIC platform device error message ARM: OMAP2+: clock data: Add dev-id for the omap-gpmc dummy fck ARM: OMAP: resolve sparse warning concerning debug_card_init() ARM: OMAP4: Fix twd_local_timer_register regression ARM: tegra: add tegra_timer clock ARM: tegra: rename tegra system timer ...
-
David Howells authored
Emit the magic string that indicates a module has a signature after the signature data instead of before it. This allows module_sig_check() to be made simpler and faster by the elimination of the search for the magic string. Instead we just need to do a single memcmp(). This works because at the end of the signature data there is the fixed-length signature information block. This block then falls immediately prior to the magic number. From the contents of the information block, it is trivial to calculate the size of the signature data and thus the size of the actual module data. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
- 19 Oct, 2012 10 commits
-
-
git://git.infradead.org/users/jcooper/linuxOlof Johansson authored
From Jason Cooper: - improve #ifdef logic to prevent linker errors with CACHE_FEROCEON_L2 - lsxl board dts fixes * tag 'kirkwood_fixes_for_v3.7' of git://git.infradead.org/users/jcooper/linux: ARM: kirkwood: fix buttons on lsxl boards ARM: kirkwood: fix LEDs names for lsxl boards ARM: Kirkwood: fix disabling CACHE_FEROCEON_L2
-
David Howells authored
The module build process no longer creates intermediate files for module signing, so remove them from .gitignore. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
David Howells authored
Turn sign-file into perl and merge in x509keyid. The latter doesn't need to be a separate script as it doesn't actually need to work out the SHA1 sum of the X.509 certificate itself, since it can get that from the X.509 certificate. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Olof Johansson authored
Merge branch 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc into fixes A collection of warning fixes on non-ARM code from Arnd Bergmann: * 'testing/driver-warnings' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: s3c: mark s3c2440_clk_add as __init_refok spi/s3c64xx: use correct dma_transfer_direction type pcmcia: sharpsl: don't discard sharpsl_pcmcia_ops USB: EHCI: mark ehci_orion_conf_mbus_windows __devinit mm/slob: use min_t() to compare ARCH_SLAB_MINALIGN SCSI: ARM: make fas216_dumpinfo function conditional SCSI: ARM: ncr5380/oak uses no interrupts
-
KAMEZAWA Hiroyuki authored
/proc/<pid>/numa_maps scans vma and show mempolicy under mmap_sem. It sometimes accesses task->mempolicy which can be freed without mmap_sem and numa_maps can show some garbage while scanning. This patch tries to take reference count of task->mempolicy at reading numa_maps before calling get_vma_policy(). By this, task->mempolicy will not be freed until numa_maps reaches its end. V2->v3 - updated comments to be more verbose. - removed task_lock() in numa_maps code. V1->V2 - access task->mempolicy only once and remember it. Becase kernel/exit.c can overwrite it. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by: David Rientjes <rientjes@google.com> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull miscellaneous x86 fixes from Peter Anvin: "The biggest ones are fixing suspend/resume breakage on 32 bits, and an interrim fix for mapping over holes that allows AMD kit with more than 1 TB. A final solution for the latter is in the works, but involves some fairly invasive changes that will probably mean it will only be appropriate for 3.8." * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86, MCE: Remove bios_cmci_threshold sysfs attribute x86, amd, mce: Avoid NULL pointer reference on CPU northbridge lookup x86: Exclude E820_RESERVED regions and memory holes above 4 GB from direct mapping. x86/cache_info: Use ARRAY_SIZE() in amd_l3_attrs() x86/reboot: Remove quirk entry for SBC FITPC x86, suspend: Correct the restore of CR4, EFER; skip computing EFLAGS.ID
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "Seven fixes" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (7 patches) lib/dma-debug.c: fix __hash_bucket_find() mm: compaction: correct the nr_strict va isolated check for CMA firmware/memmap: avoid type conflicts with the generic memmap_init() pidns: remove recursion from free_pid_ns() drivers/video/backlight/lm3639_bl.c: return proper error in lm3639_bled_mode_store() error paths kernel/sys.c: fix stack memory content leak via UNAME26 linux/coredump.h needs asm/siginfo.h
-
Ming Lei authored
If there is only one match, the unique matched entry should be returned. Without the fix, the upcoming dma debug interfaces ("dma-debug: new interfaces to debug dma mapping errors") can't work reliably because only device and dma_addr are passed to dma_mapping_error(). Signed-off-by: Ming Lei <ming.lei@canonical.com> Reported-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Joerg Roedel <joerg.roedel@amd.com> Tested-by: Shuah Khan <shuah.khan@hp.com> Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Jakub Kicinski <kubakici@wp.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Mel Gorman authored
Thierry reported that the "iron out" patch for isolate_freepages_block() had problems due to the strict check being too strict with "mm: compaction: Iron out isolate_freepages_block() and isolate_freepages_range() -fix1". It's possible that more pages than necessary are isolated but the check still fails and I missed that this fix was not picked up before RC1. This same problem has been identified in 3.7-RC1 by Tony Prisk and should be addressed by the following patch. Signed-off-by: Mel Gorman <mgorman@suse.de> Tested-by: Tony Prisk <linux@prisktech.co.nz> Reported-by: Thierry Reding <thierry.reding@avionic-design.de> Acked-by: Rik van Riel <riel@redhat.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Richard Davies <richard@arachsys.com> Cc: Shaohua Li <shli@kernel.org> Cc: Avi Kivity <avi@redhat.com> Cc: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Fengguang Wu authored
Fix this build error: drivers/firmware/memmap.c:240:19: error: conflicting types for 'memmap_init' arch/ia64/include/asm/pgtable.h:565:17: note: previous declaration of 'memmap_init' was here Signed-off-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Bernhard Walle <bwalle@suse.de> Cc: Glauber Costa <glommer@parallels.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-