- 01 Jul, 2014 33 commits
-
-
Johan Hovold authored
commit 353fe198 upstream. Fix AA deadlock in open error path that would call close() and try to grab the already held disc_mutex. Fixes: b9a44bc1 ("sierra: driver urb handling improvements") Signed-off-by:
Johan Hovold <jhovold@gmail.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Johan Hovold authored
commit fb7ad4f9 upstream. Keep trying to submit urbs rather than bail out on first read-urb submission error, which would also prevent I/O for any further ports from being resumed. Instead keep an error count, for all types of failed submissions, and let USB core know that something went wrong. Also make sure to always clear the suspended flag. Currently a failed read-urb submission would prevent cached writes as well as any subsequent writes from being submitted until next suspend-resume cycle, something which may not even necessarily happen. Note that USB core currently only logs an error if an interface resume failed. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
-
Johan Hovold authored
commit 9096f1fb upstream. The interrupt urb was submitted unconditionally at resume, something which could lead to a NULL-pointer dereference in the urb completion handler as resume may be called after the port and port data is gone. Fix this by making sure the interrupt urb is only submitted and active when the port is open. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
-
Johan Hovold authored
commit 79eed03e upstream. The delayed-write queue was never emptied at shutdown (close), something which could lead to leaked urbs if the port is closed before being runtime resumed due to a write. When this happens the output buffer would not drain on close (closing_wait timeout), and after consecutive opens, writes could be corrupted with previously buffered data, transfered with reduced throughput or completely blocked. Note that unbusy_queued_urb() was simply moved out of CONFIG_PM. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
-
Johan Hovold authored
commit 170fad9e upstream. Fix race between write() and suspend() which could lead to writes being dropped (or I/O while suspended) if the device is runtime suspended while a write request is being processed. Specifically, suspend() releases the susp_lock after determining the device is idle but before setting the suspended flag, thus leaving a window where a concurrent write() can submit an urb. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
-
xiao jin authored
commit d9e93c08 upstream. We find a race between write and resume. usb_wwan_resume run play_delayed() and spin_unlock, but intfdata->suspended still is not set to zero. At this time usb_wwan_write is called and anchor the urb to delay list. Then resume keep running but the delayed urb have no chance to be commit until next resume. If the time of next resume is far away, tty will be blocked in tty_wait_until_sent during time. The race also can lead to writes being reordered. This patch put play_Delayed and intfdata->suspended together in the spinlock, it's to avoid the write race during resume. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
xiao jin <jin.xiao@intel.com> Signed-off-by:
Zhang, Qi1 <qi1.zhang@intel.com> Reviewed-by:
David Cohen <david.a.cohen@linux.intel.com> Signed-off-by:
-
xiao jin authored
commit db090473 upstream. When enable usb serial for modem data, sometimes the tty is blocked in tty_wait_until_sent because portdata->out_busy always is set and have no chance to be cleared. We find a bug in write error path. usb_wwan_write set portdata->out_busy firstly, then try autopm async with error. No out urb submit and no usb_wwan_outdat_callback to this write, portdata->out_busy can't be cleared. This patch clear portdata->out_busy if usb_wwan_write try autopm async with error. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
-
Mikulas Patocka authored
commit 972754cf upstream. I had occasional screen corruption with the matrox framebuffer driver and I found out that the reason for the corruption is that the hardware blitter accesses the videoram while it is being written to. The matrox driver has a macro WaitTillIdle() that should wait until the blitter is idle, but it sometimes doesn't work. I added a dummy read mga_inl(M_STATUS) to WaitTillIdle() to fix the problem. The dummy read will flush the write buffer in the PCI chipset, and the next read of M_STATUS will return the hardware status. Since applying this patch, I had no screen corruption at all. Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Maurizio Lombardi authored
commit b5b60778 upstream. The variable "size" is expressed as number of blocks and not as number of clusters, this could trigger a kernel panic when using ext4 with the size of a cluster different from the size of a block. Signed-off-by:
Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
Jan Kara authored
commit eeece469 upstream. Tail of a page straddling inode size must be zeroed when being written out due to POSIX requirement that modifications of mmaped page beyond inode size must not be written to the file. ext4_bio_write_page() did this only for blocks fully beyond inode size but didn't properly zero blocks partially beyond inode size. Fix this. The problem has been uncovered by mmap_11-4 test in openposix test suite (part of LTP). Reported-by:
Xiaoguang Wang <wangxg.fnst@cn.fujitsu.com> Fixes: 5a0dc736 Fixes: bd2d0210 CC: stable@vger.kernel.org Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Christian Borntraeger authored
commit 993072ee upstream. The IRB might be 96 bytes if the extended-I/O-measurement facility is used. This feature is currently not used by Linux, but struct irb already has the emw defined. So let's make the irb in lowcore match the size of the internal data structure to be future proof. We also have to add a pad, to correctly align the paste. The bigger irb field also circumvents a bug in some QEMU versions that always write the emw field on test subchannel and therefore destroy the paste definitions of this CPU. Running under these QEMU version broke some timing functions in the VDSO and all users of these functions, e.g. some JREs. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by:
Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Sebastian Ott <sebott@linux.vnet.ibm.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by:
-
Lai Jiangshan authored
commit 3afb69cb upstream. idr_replace() open-codes the logic to calculate the maximum valid ID given the height of the idr tree; unfortunately, the open-coded logic doesn't account for the fact that the top layer may have unused slots and over-shifts the limit to zero when the tree is at its maximum height. The following test code shows it fails to replace the value for id=((1<<27)+42): static void test5(void) { int id; DEFINE_IDR(test_idr); #define TEST5_START ((1<<27)+42) /* use the highest layer */ printk(KERN_INFO "Start test5\n"); id = idr_alloc(&test_idr, (void *)1, TEST5_START, 0, GFP_KERNEL); BUG_ON(id != TEST5_START); TEST_BUG_ON(idr_replace(&test_idr, (void *)2, TEST5_START) != (void *)1); idr_destroy(&test_idr); printk(KERN_INFO "End of test5\n"); } Fix the bug by using idr_max() which correctly takes into account the maximum allowed shift. sub_alloc() shares the same problem and may incorrectly fail with -EAGAIN; however, this bug doesn't affect correct operation because idr_get_empty_slot(), which already uses idr_max(), retries with the increased @id in such cases. [tj@kernel.org: Updated patch description.] Signed-off-by:
Lai Jiangshan <laijs@cn.fujitsu.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Will Deacon authored
commit c1688707 upstream. Our compat PTRACE_POKEUSR implementation simply passes the user data to regset_copy_from_user after some simple range checking. Unfortunately, the data in question has already been copied to the kernel stack by this point, so the subsequent access_ok check fails and the ptrace request returns -EFAULT. This causes problems tracing fork() with older versions of strace. This patch briefly changes the fs to KERNEL_DS, so that the access_ok check passes even with a kernel address. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
-
Matthew Dempsky authored
commit 4e52365f upstream. When tracing a process in another pid namespace, it's important for fork event messages to contain the child's pid as seen from the tracer's pid namespace, not the parent's. Otherwise, the tracer won't be able to correlate the fork event with later SIGTRAP signals it receives from the child. We still risk a race condition if a ptracer from a different pid namespace attaches after we compute the pid_t value. However, sending a bogus fork event message in this unlikely scenario is still a vast improvement over the status quo where we always send bogus fork event messages to debuggers in a different pid namespace than the forking process. Signed-off-by:
Matthew Dempsky <mdempsky@chromium.org> Acked-by:
Oleg Nesterov <oleg@redhat.com> Cc: Kees Cook <keescook@chromium.org> Cc: Julien Tinnes <jln@chromium.org> Cc: Roland McGrath <mcgrathr@chromium.org> Cc: Jan Kratochvil <jan.kratochvil@redhat.com> Signed-off-by:
-
Johannes Weiner authored
commit 71abdc15 upstream. When kswapd exits, it can end up taking locks that were previously held by allocating tasks while they waited for reclaim. Lockdep currently warns about this: On Wed, May 28, 2014 at 06:06:34PM +0800, Gu Zheng wrote: > inconsistent {RECLAIM_FS-ON-W} -> {IN-RECLAIM_FS-R} usage. > kswapd2/1151 [HC0[0]:SC0[0]:HE1:SE1] takes: > (&sig->group_rwsem){+++++?}, at: exit_signals+0x24/0x130 > {RECLAIM_FS-ON-W} state was registered at: > mark_held_locks+0xb9/0x140 > lockdep_trace_alloc+0x7a/0xe0 > kmem_cache_alloc_trace+0x37/0x240 > flex_array_alloc+0x99/0x1a0 > cgroup_attach_task+0x63/0x430 > attach_task_by_pid+0x210/0x280 > cgroup_procs_write+0x16/0x20 > cgroup_file_write+0x120/0x2c0 > vfs_write+0xc0/0x1f0 > SyS_write+0x4c/0xa0 > tracesys+0xdd/0xe2 > irq event stamp: 49 > hardirqs last enabled at (49): _raw_spin_unlock_irqrestore+0x36/0x70 > hardirqs last disabled at (48): _raw_spin_lock_irqsave+0x2b/0xa0 > softirqs last enabled at (0): copy_process.part.24+0x627/0x15f0 > softirqs last disabled at (0): (null) > > other info that might help us debug this: > Possible unsafe locking scenario: > > CPU0 > ---- > lock(&sig->group_rwsem); > <Interrupt> > lock(&sig->group_rwsem); > > *** DEADLOCK *** > > no locks held by kswapd2/1151. > > stack backtrace: > CPU: 30 PID: 1151 Comm: kswapd2 Not tainted 3.10.39+ #4 > Call Trace: > dump_stack+0x19/0x1b > print_usage_bug+0x1f7/0x208 > mark_lock+0x21d/0x2a0 > __lock_acquire+0x52a/0xb60 > lock_acquire+0xa2/0x140 > down_read+0x51/0xa0 > exit_signals+0x24/0x130 > do_exit+0xb5/0xa50 > kthread+0xdb/0x100 > ret_from_fork+0x7c/0xb0 This is because the kswapd thread is still marked as a reclaimer at the time of exit. But because it is exiting, nobody is actually waiting on it to make reclaim progress anymore, and it's nothing but a regular thread at this point. Be tidy and strip it of all its powers (PF_MEMALLOC, PF_SWAPWRITE, PF_KSWAPD, and the lockdep reclaim state) before returning from the thread function. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Reported-by:
Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by:
-
Kees Cook authored
commit 1b15d2e5 upstream. Some drivers use the first HID report in the list instead of using an index. In these cases, validation uses ID 0, which was supposed to mean "first known report". This fixes the problem, which was causing at least the lgff family of devices to stop working since hid_validate_values was being called with ID 0, but the devices used single numbered IDs for their reports: 0x05, 0x01, /* Usage Page (Desktop), */ 0x09, 0x05, /* Usage (Gamepad), */ 0xA1, 0x01, /* Collection (Application), */ 0xA1, 0x02, /* Collection (Logical), */ 0x85, 0x01, /* Report ID (1), */ ... Reported-by:
Simon Wood <simon@mungewell.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Reviewed-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Signed-off-by:
Jiri Kosina <jkosina@suse.cz> Signed-off-by:
-
Hugh Dickins authored
commit 7f39dda9 upstream. Trinity reports BUG: sleeping function called from invalid context at kernel/locking/rwsem.c:47 in_atomic(): 0, irqs_disabled(): 0, pid: 5787, name: trinity-c27 __might_sleep < down_write < __put_anon_vma < page_get_anon_vma < migrate_pages < compact_zone < compact_zone_order < try_to_compact_pages .. Right, since conversion to mutex then rwsem, we should not put_anon_vma() from inside an rcu_read_lock()ed section: fix the two places that did so. And add might_sleep() to anon_vma_free(), as suggested by Peter Zijlstra. Fixes: 88c22088 ("mm: optimize page_lock_anon_vma() fast-path") Reported-by:
Dave Jones <davej@redhat.com> Signed-off-by:
Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Tony Luck authored
commit 74614de1 upstream. When Linux sees an "action optional" machine check (where h/w has reported an error that is not in the current execution path) we generally do not want to signal a process, since most processes do not have a SIGBUS handler - we'd just prematurely terminate the process for a problem that they might never actually see. task_early_kill() decides whether to consider a process - and it checks whether this specific process has been marked for early signals with "prctl", or if the system administrator has requested early signals for all processes using /proc/sys/vm/memory_failure_early_kill. But for MF_ACTION_REQUIRED case we must not defer. The error is in the execution path of the current thread so we must send the SIGBUS immediatley. Fix by passing a flag argument through collect_procs*() to task_early_kill() so it knows whether we can defer or must take action. Signed-off-by:
Tony Luck <tony.luck@intel.com> Signed-off-by:
Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@suse.de> Cc: Chen Gong <gong.chen@linux.jf.intel.com> Signed-off-by:
-
Tony Luck authored
commit a70ffcac upstream. When a thread in a multi-threaded application hits a machine check because of an uncorrectable error in memory - we want to send the SIGBUS with si.si_code = BUS_MCEERR_AR to that thread. Currently we fail to do that if the active thread is not the primary thread in the process. collect_procs() just finds primary threads and this test: if ((flags & MF_ACTION_REQUIRED) && t == current) { will see that the thread we found isn't the current thread and so send a si.si_code = BUS_MCEERR_AO to the primary (and nothing to the active thread at this time). We can fix this by checking whether "current" shares the same mm with the process that collect_procs() said owned the page. If so, we send the SIGBUS to current (with code BUS_MCEERR_AR). Signed-off-by:
Otto Bruggeman <otto.g.bruggeman@intel.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Borislav Petkov <bp@suse.de> Cc: Chen Gong <gong.chen@linux.jf.intel.com> Signed-off-by:
-
Mel Gorman authored
commit 675becce upstream. throttle_direct_reclaim() is meant to trigger during swap-over-network during which the min watermark is treated as a pfmemalloc reserve. It throttes on the first node in the zonelist but this is flawed. The user-visible impact is that a process running on CPU whose local memory node has no ZONE_NORMAL will stall for prolonged periods of time, possibly indefintely. This is due to throttle_direct_reclaim thinking the pfmemalloc reserves are depleted when in fact they don't exist on that node. On a NUMA machine running a 32-bit kernel (I know) allocation requests from CPUs on node 1 would detect no pfmemalloc reserves and the process gets throttled. This patch adjusts throttling of direct reclaim to throttle based on the first node in the zonelist that has a usable ZONE_NORMAL or lower zone. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
Mel Gorman <mgorman@suse.de> Signed-off-by:
-
Johan Hovold authored
commit acf47d4f upstream. Fix potential I/O while runtime suspended due to missing PM operations in send_setup. Fixes: 383cedc3 ("USB: serial: full autosuspend support for the option driver") Signed-off-by:
-
Alan Stern authored
commit b0a50e92 upstream. Leandro Liptak reports that his HASEE E200 computer hangs when we ask the BIOS to hand over control of the EHCI host controller. This definitely sounds like a bug in the BIOS, but at the moment there is no way to fix it. This patch works around the problem by avoiding the handoff whenever the motherboard and BIOS version match those of Leandro's computer. Signed-off-by:
Alan Stern <stern@rowland.harvard.edu> Reported-by:
Leandro Liptak <leandroliptak@gmail.com> Tested-by:
-
Paul Bolle authored
commit 77c2f02e upstream. Commit 193ab2a6 ("usb: gadget: allow multiple gadgets to be built") apparently required that checks for CONFIG_USB_GADGET_OMAP would be replaced with checks for CONFIG_USB_OMAP. Do so now for the remaining checks for CONFIG_USB_GADGET_OMAP, even though these checks have basically been broken since v3.1. And, since we're touching this code, use the IS_ENABLED() macro, so things will now (hopefully) also work if USB_OMAP is modular. Fixes: 193ab2a6 ("usb: gadget: allow multiple gadgets to be built") Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Signed-off-by:
Tony Lindgren <tony@atomide.com> Signed-off-by:
-
Felipe Balbi authored
commit 687ef981 upstream. so it seems like DWC3 IP doesn't clear stalls automatically when we disable an endpoint, because of that, we _must_ make sure stalls are cleared before clearing the proper bit in DALEPENA register. Reported-by:
Johannes Stezenbach <js@sig21.net> Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Paul Bolle authored
commit d30f2065 upstream. Commit 193ab2a6 ("usb: gadget: allow multiple gadgets to be built") basically renamed the Kconfig symbol USB_GADGET_PXA25X to USB_PXA25X. It did not rename the related macros in use at that time. Commit c0a39151 ("ARM: pxa: fix inconsistent CONFIG_USB_PXA27X") did so for all but one macro. Rename that last macro too now. Fixes: 193ab2a6 ("usb: gadget: allow multiple gadgets to be built") Signed-off-by:
-
Alan Stern authored
commit 32b36eea upstream. In usbtest, tests 5 - 8 use the scatter-gather library in usbcore without any sort of timeout. If there's a problem in the gadget or host controller being tested, the test can hang. This patch adds a 10-second timeout to the tests, so that they will fail gracefully with an ETIMEDOUT error instead of hanging. Signed-off-by:
Huang Rui <ray.huang@amd.com> Tested-by:
-
Huang Rui authored
commit e4d58f5d upstream. TEST 12 and TEST 24 unlinks the URB write request for N times. When host and gadget both initialize pattern 1 (mod 63) data series to transfer, the gadget side will complain the wrong data which is not expected. Because in host side, usbtest doesn't fill the data buffer as mod 63 and this patch fixed it. [20285.488974] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.489181] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.489423] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb50800 length 512 last [20285.489727] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.490055] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.490281] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.490492] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Active [20285.490713] dwc3 dwc3.0.auto: ep1out-bulk: endpoint busy [20285.490909] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Complete [20285.491117] dwc3 dwc3.0.auto: request ffff8800aa6cb480 from ep1out-bulk completed 512/512 ===> 0 [20285.491431] zero gadget: bad OUT byte, buf[1] = 0 [20285.491605] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Set Stall' params 00000000 00000000 00000000 [20285.491915] dwc3 dwc3.0.auto: Command Complete --> 0 [20285.492099] dwc3 dwc3.0.auto: queing request ffff8800aa6cb480 to ep1out-bulk length 512 [20285.492387] dwc3 dwc3.0.auto: ep1out-bulk: Transfer Not Ready [20285.492595] dwc3 dwc3.0.auto: ep1out-bulk: reason Transfer Not Active [20285.492830] dwc3 dwc3.0.auto: ep1out-bulk: req ffff8800aa6cb480 dma aeb51000 length 512 last [20285.493135] dwc3 dwc3.0.auto: ep1out-bulk: cmd 'Start Transfer' params 00000000 a9eaf000 00000000 [20285.493465] dwc3 dwc3.0.auto: Command Complete --> 0 Signed-off-by:
-
Dan Carpenter authored
commit 8bab797c upstream. This is a static checker fix. The "dev" variable is always NULL after the while statement so we would be dereferencing a NULL pointer here. Fixes: 819a3eba ('[PATCH] applicom: fix error handling') Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
-
Paul Bolle authored
commit d3921a03 upstream. Commit d0f47ff1 ("ASoC: OMAP: Build config cleanup for McBSP") removed the Kconfig symbol OMAP_MCBSP. It left two checks for CONFIG_OMAP_MCBSP untouched. Convert these to checks for CONFIG_SND_OMAP_SOC_MCBSP. That must be correct, since that re-enables calls to functions that are all found in sound/soc/omap/mcbsp.c. And that file is built only if CONFIG_SND_OMAP_SOC_MCBSP is defined. Fixes: d0f47ff1 ("ASoC: OMAP: Build config cleanup for McBSP") Signed-off-by:
-
Krzysztof Kozlowski authored
commit dfee4111 upstream. Fix NULL pointer exception when platform data is not supplied. The driver dereferenced pdata pointer where it could be NULL. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Fixes: 810d601fSigned-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Johan Hovold authored
commit 6954cc1f upstream. Fix null-pointer dereference at probe when the mdio platform device is missing (e.g. when it has been disabled in DT). Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Ursula Braun authored
commit f5738e2e upstream. When sending data through IUCV a MESSAGE COMPLETE interrupt signals that sent data memory can be freed or reused again. With commit f9c41a62 "af_iucv: fix recvmsg by replacing skb_pull() function" the MESSAGE COMPLETE callback iucv_callback_txdone() identifies the wrong skb as being confirmed, which leads to data corruption. This patch fixes the skb mapping logic in iucv_callback_txdone(). Signed-off-by:
Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by:
Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by:
-
Stephane Grosjean authored
commit 0b5a958c upstream. As remarked by Christopher R. Baker in his post at http://marc.info/?l=linux-can&m=139707295706465&w=2 there's a possibility for an use after free condition at device removal. This simplified patch introduces an additional variable to prevent the issue. Thanks for catching this. Reported-by:
Christopher R. Baker <cbaker@rec.ri.cmu.edu> Signed-off-by:
Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by:
Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by:
-
- 26 Jun, 2014 7 commits
-
-
Greg Kroah-Hartman authored
-
Lars-Peter Clausen authored
commit 883a1d49 upstream. The ALSA control code expects that the range of assigned indices to a control is continuous and does not overflow. Currently there are no checks to enforce this. If a control with a overflowing index range is created that control becomes effectively inaccessible and unremovable since snd_ctl_find_id() will not be able to find it. This patch adds a check that makes sure that controls with a overflowing index range can not be created. Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Acked-by:
Jaroslav Kysela <perex@perex.cz> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Lars-Peter Clausen authored
commit ac902c11 upstream. Each control gets automatically assigned its numids when the control is created. The allocation is done by incrementing the numid by the amount of allocated numids per allocation. This means that excessive creation and destruction of controls (e.g. via SNDRV_CTL_IOCTL_ELEM_ADD/REMOVE) can cause the id to eventually overflow. Currently when this happens for the control that caused the overflow kctl->id.numid + kctl->count will also over flow causing it to be smaller than kctl->id.numid. Most of the code assumes that this is something that can not happen, so we need to make sure that it won't happen Signed-off-by:
-
Lars-Peter Clausen authored
commit fd9f26e4 upstream. A control that is visible on the card->controls list can be freed at any time. This means we must not access any of its memory while not holding the controls_rw_lock. Otherwise we risk a use after free access. Signed-off-by:
-
Lars-Peter Clausen authored
commit 82262a46 upstream. There are two issues with the current implementation for replacing user controls. The first is that the code does not check if the control is actually a user control and neither does it check if the control is owned by the process that tries to remove it. That allows userspace applications to remove arbitrary controls, which can cause a user after free if a for example a driver does not expect a control to be removed from under its feed. The second issue is that on one hand when a control is replaced the user_ctl_count limit is not checked and on the other hand the user_ctl_count is increased (even though the number of user controls does not change). This allows userspace, once the user_ctl_count limit as been reached, to repeatedly replace a control until user_ctl_count overflows. Once that happens new controls can be added effectively bypassing the user_ctl_count limit. Both issues can be fixed by instead of open-coding the removal of the control that is to be replaced to use snd_ctl_remove_user_ctl(). This function does proper permission checks as well as decrements user_ctl_count after the control has been removed. Note that by using snd_ctl_remove_user_ctl() the check which returns -EBUSY at beginning of the function if the control already exists is removed. This is not a problem though since the check is quite useless, because the lock that is protecting the control list is released between the check and before adding the new control to the list, which means that it is possible that a different control with the same settings is added to the list after the check. Luckily there is another check that is done while holding the lock in snd_ctl_add(), so we'll rely on that to make sure that the same control is not added twice. Signed-off-by:
-
Lars-Peter Clausen authored
commit 07f4d9d7 upstream. The user-control put and get handlers as well as the tlv do not protect against concurrent access from multiple threads. Since the state of the control is not updated atomically it is possible that either two write operations or a write and a read operation race against each other. Both can lead to arbitrary memory disclosure. This patch introduces a new lock that protects user-controls from concurrent access. Since applications typically access controls sequentially than in parallel a single lock per card should be fine. Signed-off-by:
-
David Henningsson authored
commit 2041d564 upstream. According to the bug reporter (Данило Шеган), the external mic starts to work and has proper jack detection if only pin 0x19 is marked properly as an external headset mic. AlsaInfo at https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1328587/+attachment/4128991/+files/AlsaInfo.txt BugLink: https://bugs.launchpad.net/bugs/1328587Signed-off-by:
David Henningsson <david.henningsson@canonical.com> Signed-off-by:
-
