- 01 Sep, 2013 40 commits
-
-
Geert Uytterhoeven authored
Internally, btrfs_header_fsid() calculates an unsigned long, but casts it to a pointer, while all callers cast it to unsigned long again. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Josef Bacik <jbacik@fusionio.com> Signed-off-by:
Chris Mason <chris.mason@fusionio.com>
-
Geert Uytterhoeven authored
Internally, btrfs_dev_extent_chunk_tree_uuid() calculates an unsigned long, but casts it to a pointer, while all callers cast it to unsigned long again. Signed-off-by:
-
Geert Uytterhoeven authored
All callers of btrfs_device_fsid() cast its return type to unsigned long. Signed-off-by:
-
Geert Uytterhoeven authored
All callers of btrfs_device_uuid() cast its return type to unsigned long. Signed-off-by:
-
Geert Uytterhoeven authored
mirror_num is always "int", hence don't cast it to "unsigned long long" and format it as a 64-bit number. Signed-off-by:
-
Geert Uytterhoeven authored
PAGE_SIZE is "unsigned long" everywhere, so there's no need to cast it to "unsigned long long" and format it as a 64-bit number. Signed-off-by:
-
Geert Uytterhoeven authored
The internal btrfs device id is a u64, hence make the constant BTRFS_DEV_REPLACE_DEVID "unsigned long long" as well, so we no longer need a cast to print it. Signed-off-by:
-
Geert Uytterhoeven authored
u64 is "unsigned long long" on all architectures now, so there's no need to cast it when formatting it using the "ll" length modifier. Signed-off-by:
-
Filipe David Borba Manana authored
This issue is simple to reproduce and observe if kmemleak is enabled. Two simple ways to reproduce it: ** 1 $ mkfs.btrfs -f /dev/loop0 $ mount /dev/loop0 /mnt/btrfs $ btrfs balance start /mnt/btrfs $ umount /mnt/btrfs ** 2 $ mkfs.btrfs -f /dev/loop0 $ mount /dev/loop0 /mnt/btrfs $ touch /mnt/btrfs/foobar $ rm -f /mnt/btrfs/foobar $ umount /mnt/btrfs After a while, kmemleak reports the leak: $ cat /sys/kernel/debug/kmemleak unreferenced object 0xffff880402b13e00 (size 128): comm "btrfs", pid 19621, jiffies 4341648183 (age 70057.844s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 fc c6 b1 04 88 ff ff 04 00 04 00 ad 4e ad de .............N.. backtrace: [<ffffffff817275a6>] kmemleak_alloc+0x26/0x50 [<ffffffff8117832b>] kmem_cache_alloc_trace+0xeb/0x1d0 [<ffffffffa04db499>] btrfs_alloc_block_rsv+0x39/0x70 [btrfs] [<ffffffffa04f8bad>] btrfs_orphan_add+0x13d/0x1b0 [btrfs] [<ffffffffa04e2b13>] btrfs_remove_block_group+0x143/0x500 [btrfs] [<ffffffffa0518158>] btrfs_relocate_chunk.isra.63+0x618/0x790 [btrfs] [<ffffffffa051bc27>] btrfs_balance+0x8f7/0xe90 [btrfs] [<ffffffffa05240a0>] btrfs_ioctl_balance+0x250/0x550 [btrfs] [<ffffffffa05269ca>] btrfs_ioctl+0xdfa/0x25f0 [btrfs] [<ffffffff8119c936>] do_vfs_ioctl+0x96/0x570 [<ffffffff8119cea1>] SyS_ioctl+0x91/0xb0 [<ffffffff81750242>] system_call_fastpath+0x16/0x1b [<ffffffffffffffff>] 0xffffffffffffffff This affects btrfs-next, revision be8e3cd00d7293dd177e3f8a4a1645ce09ca3acb (Btrfs: separate out tests into their own directory). Signed-off-by:Filipe David Borba Manana <fdmanana@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
It turns out we don't properly rollback in-core btrfs_device state on umount. We zero out ->bdev, ->in_fs_metadata and that's about it. In particular, we don't zero out ->generation, and this can lead to us refusing a mount -- a non-NULL fs_devices->latest_bdev is essential, but btrfs_close_extra_devices will happily assign NULL to ->latest_bdev if the first device on the dev_list happens to be missing and consequently has no bdev attached. This happens because since commit a6b0d5c8 btrfs_close_extra_devices adjusts ->latest_bdev, and in doing that, relies on the ->generation. Fix this, and possibly other problems, by zeroing out everything except for what device_list_add sets, so that a mount right after insmod and 'btrfs dev scan' is no different from any later mount in this respect. Signed-off-by:
Ilya Dryomov <idryomov@gmail.com> Signed-off-by:
-
Ilya Dryomov authored
In the spirit of btrfs_alloc_device, add a helper for allocating and doing some common initialization of btrfs_fs_devices struct. Signed-off-by:
-
Ilya Dryomov authored
Currently btrfs_device is allocated ad-hoc in a few different places, and as a result not all fields are initialized properly. In particular, readahead state is only initialized in device_list_add (at scan time), and not in btrfs_init_new_device (when the new device is added with 'btrfs dev add'). Fix this by adding an allocation helper and switch everybody but __btrfs_close_devices to it. (__btrfs_close_devices is dealt with in a later commit.) Signed-off-by:
-
Ilya Dryomov authored
find_next_devid() knows which root to search, so it should take an fs_info instead of an arbitrary root. Signed-off-by:
-
Stefan Behrens authored
If you start the replace procedure on a read only filesystem, at the end the procedure fails to write the updated dev_items to the chunk tree. The problem is that this error is not indicated except for a WARN_ON(). If the user now thinks that everything was done as expected and destroys the source device (with mkfs or with a hammer). The next mount fails with "failed to read chunk root" and the filesystem is gone. This commit adds code to fail the attempt to start the replace procedure if the filesystem is mounted read-only. Signed-off-by:
Stefan Behrens <sbehrens@giantdisaster.de> Cc: <stable@vger.kernel.org> # 3.10+ Signed-off-by:
-
Mike Frysinger authored
Signed-off-by:
Mike Frysinger <vapier@gentoo.org> Signed-off-by:
-
Filipe David Borba Manana authored
After we set force_compress with a new value (which was not being done while holding the inode mutex), if an error happens and we jump to the label out_ra, the force_compress property of the inode is not set to BTRFS_COMPRESS_NONE (unlike in the case where no errors happen). Signed-off-by:
-
Stefan Behrens authored
This should never be needed, but since all functions are there to check and rebuild the UUID tree, a mount option is added that allows to force this check and rebuild procedure. Signed-off-by:
-
Stefan Behrens authored
If the filesystem was mounted with an old kernel that was not aware of the UUID tree, this is detected by looking at the uuid_tree_generation field of the superblock (similar to how the free space cache is doing it). If a mismatch is detected at mount time, a thread is started that does two things: 1. Iterate through the UUID tree, check each entry, delete those entries that are not valid anymore (i.e., the subvol does not exist anymore or the value changed). 2. Iterate through the root tree, for each found subvolume, add the UUID tree entries for the subvolume (if they are not already there). This mechanism is also used to handle and repair errors that happened during the initial creation and filling of the tree. The update of the uuid_tree_generation field (which indicates that the state of the UUID tree is up to date) is blocked until all create and repair operations are successfully completed. Signed-off-by:
-
Stefan Behrens authored
In order to be able to detect the case that a filesystem is mounted with an old kernel, add a uuid-tree-gen field like the free space cache is doing it. It is part of the super block and written with each commit. Old kernels do not know this field and don't update it. Signed-off-by:
-
Stefan Behrens authored
When the UUID tree is initially created, a task is spawned that walks through the root tree. For each found subvolume root_item, the uuid and received_uuid entries in the UUID tree are added. This is such a quick operation so that in case somebody wants to unmount the filesystem while the task is still running, the unmount is delayed until the UUID tree building task is finished. Signed-off-by:
-
Stefan Behrens authored
When a new subvolume or snapshot is created, a new UUID item is added to the UUID tree. Such items are removed when the subvolume is deleted. The ioctl to set the received subvolume UUID is also touched and will now also add this received UUID into the UUID tree together with the ID of the subvolume. The latter is also done when read-only snapshots are created which inherit all the send/receive information from the parent subvolume. User mode programs use the BTRFS_IOC_TREE_SEARCH ioctl to search and read in the UUID tree. Signed-off-by:
-
Stefan Behrens authored
This tree is not created by mkfs.btrfs. Therefore when a filesystem is mounted writable and the UUID tree does not exist, this tree is created if required. The tree is also added to the fs_info structure and initialized, but this commit does not yet read or write UUID tree elements. Signed-off-by:
-
Stefan Behrens authored
This commit adds support to print UUID tree elements to print-tree.c. Signed-off-by:
-
Stefan Behrens authored
Mapping UUIDs to subvolume IDs is an operation with a high effort today. Today, the algorithm even has quadratic effort (based on the number of existing subvolumes), which means, that it takes minutes to send/receive a single subvolume if 10,000 subvolumes exist. But even linear effort would be too much since it is a waste. And these data structures to allow mapping UUIDs to subvolume IDs are created every time a btrfs send/receive instance is started. It is much more efficient to maintain a searchable persistent data structure in the filesystem, one that is updated whenever a subvolume/snapshot is created and deleted, and when the received subvolume UUID is set by the btrfs-receive tool. Therefore kernel code is added with this commit that is able to maintain data structures in the filesystem that allow to quickly search for a given UUID and to retrieve data that is assigned to this UUID, like which subvolume ID is related to this UUID. This commit adds a new tree to hold UUID-to-data mapping items. The key of the items is the full UUID plus the key type BTRFS_UUID_KEY. Multiple data blocks can be stored for a given UUID, a type/length/ value scheme is used. Now follows the lengthy justification, why a new tree was added instead of using the existing root tree: The first approach was to not create another tree that holds UUID items. Instead, the items should just go into the top root tree. Unfortunately this confused the algorithm to assign the objectid of subvolumes and snapshots. The reason is that btrfs_find_free_objectid() calls btrfs_find_highest_objectid() for the first created subvol or snapshot after mounting a filesystem, and this function simply searches for the largest used objectid in the root tree keys to pick the next objectid to assign. Of course, the UUID keys have always been the ones with the highest offset value, and the next assigned subvol ID was wastefully huge. To use any other existing tree did not look proper. To apply a workaround such as setting the objectid to zero in the UUID item key and to implement collision handling would either add limitations (in case of a btrfs_extend_item() approach to handle the collisions) or a lot of complexity and source code (in case a key would be looked up that is free of collisions). Adding new code that introduces limitations is not good, and adding code that is complex and lengthy for no good reason is also not good. That's the justification why a completely new tree was introduced. Signed-off-by:
-
Sergei Trofimovich authored
Cc: Josef Bacik <jbacik@fusionio.com> Cc: Chris Mason <chris.mason@fusionio.com> Signed-off-by:
Sergei Trofimovich <slyfox@gentoo.org> Signed-off-by:
-
Stefan Behrens authored
make C=2 fs/btrfs/ CF=-D__CHECK_ENDIAN__ I tried to filter out the warnings for which patches have already been sent to the mailing list, pending for inclusion in btrfs-next. All these changes should be obviously safe. Signed-off-by:
-
Filipe David Borba Manana authored
If the inode ref key was not found and the current leaf slot was 0 (first item in the leaf) the code would always return -ENOENT. This was not correct because the desired inode ref item might be the last item in the previous leaf. Signed-off-by:
-
Filipe David Borba Manana authored
If the path doesn't fit in the input buffer, return ENAMETOOLONG instead of returning with a success code (0) and a partially filled and right justified buffer. Also removed useless buffer pointer check outside the while loop. Signed-off-by:
-
Wang Shilong authored
We have checked 'quota_root' with qgroup_ioctl_lock held before,So here the check is reduplicate, remove it. Signed-off-by:
Wang Shilong <wangsl.fnst@cn.fujitsu.com> Reviewed-by:
Miao Xie <miaox@cn.fujitsu.com> Reviewed-by:
Arne Jansen <sensille@gmx.net> Signed-off-by:
-
Wang Shilong authored
btrfs_free_qgroup_config() is not only called by open/close_ctree(),but also btrfs_disable_quota().And for btrfs_disable_quota(),we have set 'quota_root' to be null before calling btrfs_free_qgroup_config(),so it is safe to cleanup in-memory structures without lock held. Signed-off-by:
-
Wang Shilong authored
When disabling quota, we should clear out list 'dirty_qgroups',otherwise, we will get oops if enabling quota again. Fix this by abstracting similar code from del_qgroup_rb(). Signed-off-by:
-
Josef Bacik authored
If you are sending a snapshot and specifying a parent snapshot we will walk the trees and figure out where they differ and send the differences only. The way we check for differences are if the leaves aren't the same and if the keys are not the same within the leaves. So if neither leaf is the same (ie the leaf has been cow'ed from the parent snapshot) we walk each item in the send root and check it against the parent root. If the items match exactly then we don't do anything. This doesn't quite work for inode refs, since they will just have the name and the parent objectid. If you move the file from a directory and then remove that directory and re-create a directory with the same inode number as the old directory and then move that file back into that directory we will assume that nothing changed and you will get errors when you try to receive. In order to fix this we need to do extra checking to see if the inode ref really is the same or not. So do this by passing down BTRFS_COMPARE_TREE_SAME if the items match. Then if the key type is an inode ref we can do some extra checking, otherwise we just keep processing. The extra checking is to look up the generation of the directory in the parent volume and compare it to the generation of the send volume. If they match then they are the same directory and we are good to go. If they don't we have to add them to the changed refs list. This means we have to track the generation of the ref we're trying to lookup when we iterate all the refs for a particular inode. So in the case of looking for new refs we have to get the generation from the parent volume, and in the case of looking for deleted refs we have to get the generation from the send volume to compare with. There was also the issue of using a ulist to keep track of the directories we needed to check. Because we can get a deleted ref and a new ref for the same inode number the ulist won't work since it indexes based on the value. So instead just dup any directory ref we find and add it to a local list, and then process that list as normal and do away with using a ulist for this altogether. Before we would fail all of the tests in the far-progs that related to moving directories (test group 32). With this patch we now pass these tests, and all of the tests in the far-progs send testing suite. Thanks, Signed-off-by:
-
Josef Bacik authored
The plan is to have a bunch of unit tests that run when btrfs is loaded when you build with the appropriate config option. My ultimate goal is to have a test for every non-static function we have, but at first I'm going to focus on the things that cause us the most problems. To start out with this just adds a tests/ directory and moves the existing free space cache tests into that directory and sets up all of the infrastructure. Thanks, Signed-off-by:
-
Josef Bacik authored
I noticed while looking at a deadlock that we are always starting a transaction in cow_file_range(). This isn't really needed since we only need a transaction if we are doing an inline extent, or if the allocator needs to allocate a chunk. So push down all the transaction start stuff to be closer to where we actually need a transaction in all of these cases. This will hopefully reduce our write latency when we are committing often. Thanks, Signed-off-by:
-
Josef Bacik authored
I added a patch where we started taking the ordered operations mutex when we waited on ordered extents. We need this because we splice the list and process it, so if a flusher came in during this scenario it would think the list was empty and we'd usually get an early ENOSPC. The problem with this is that this lock is used in transaction committing. So we end up with something like this Transaction commit -> wait on writers Delalloc flusher -> run_ordered_operations (holds mutex) ->wait for filemap-flush to do its thing flush task -> cow_file_range ->wait on btrfs_join_transaction because we're commiting some other task -> commit_transaction because we notice trans->transaction->flush is set -> run_ordered_operations (hang on mutex) We need to disentangle the ordered operations flushing from the delalloc flushing, since they are separate things. This solves the deadlock issue I was seeing. Thanks, Signed-off-by:
-
Josef Bacik authored
There are several places where we BUG_ON() if we fail to remove the orphan items and such, which is not ok, so remove those and either abort or just carry on. This also fixes a problem where if we couldn't start a transaction we wouldn't actually remove the orphan item reserve for the inode. Thanks, Signed-off-by:
-
Josef Bacik authored
Eric pointed out that btrfs will happily allow you to delete the default subvol. This is a problem obviously since the next time you go to mount the file system it will freak out because it can't find the root. Fix this by adding a check to see if our default subvol points to the subvol we are trying to delete, and if it does not allowing it to happen. Thanks, Signed-off-by:
-
Josef Bacik authored
We have logic to see if we've already created a parent directory by check to see if an inode inside of that directory has a lower inode number than the one we are currently processing. The logic is that if there is a lower inode number then we would have had to made sure the directory was created at that previous point. The problem is that subvols inode numbers count from the lowest objectid in the root tree, which may be less than our current progress. So just skip if our dir item key is a root item. This fixes the original test and the xfstest version I made that added an extra subvol create. Thanks, Reported-by:
Emil Karlson <jekarlson@gmail.com> Signed-off-by:
-
Mark Fasheh authored
This patch adds an ioctl, BTRFS_IOC_FILE_EXTENT_SAME which will try to de-duplicate a list of extents across a range of files. Internally, the ioctl re-uses code from the clone ioctl. This avoids rewriting a large chunk of extent handling code. Userspace passes in an array of file, offset pairs along with a length argument. The ioctl will then (for each dedupe) do a byte-by-byte comparison of the user data before deduping the extent. Status and number of bytes deduped are returned for each operation. Signed-off-by:
Mark Fasheh <mfasheh@suse.de> Reviewed-by:
Zach Brown <zab@redhat.com> Signed-off-by:
-
Mark Fasheh authored
We want this for btrfs_extent_same. Basically readpage and friends do their own extent locking but for the purposes of dedupe, we want to have both files locked down across a set of readpage operations (so that we can compare data). Introduce this variant and a flag which can be set for extent_read_full_page() to indicate that we are already locked. Partial credit for this patch goes to Gabriel de Perthuis <g2p.code@gmail.com> as I have included a fix from him to the original patch which avoids a deadlock on compressed extents. Signed-off-by:
-
